Upload File

rect c its hdd series - lappusa.com · cplet itallation crimp dies: 11147100 crimp tool: 11147000...

  • Home
  • Documents
  • Rect C Its HDD Series - lappusa.com · Cplet Itallation Crimp Dies: 11147100 Crimp Tool: 11147000 Locator: 11147200 Removal Tool: 11161000 Contacts sold separately see below Contacts
4
EPIC ® Rectangular Connector Inserts 800-774-3539 • www.lappusa.com • www.lappcanada.com • www.lappmexico.com 340 Photographs are not to scale and are not true representations of the products in question. For current information go to our website. If not otherwise specified, all values relating to the product are nominal values. HDD Series EPIC ® HDD Series EPIC ® HDD series inserts offer the highest possible machined contact density in a compact insert design. With more contacts available in a single insert, smaller connector housings can be used to provide significant panel space savings. Number of Contacts: 24, 42, 72, 108, 144, 216 (+PE) Temperature Range: -40°C to +100°C - Short-term: up to +125°C Pollution Level: 2 Mating Cycles: - Per DIN EN 61984:2008 Service Life Test: Tested to 100 cycles and passed - Per Contact Thermal Test: Useful service up to 500 cycles is possible at rated voltage and current* Test Voltage: 2.5 kV Rated Voltage: - UL/CSA: 600V - IEC: 250V Rated Current: - UL: 8.5A - CSA: 10A - IEC: 10A Wire Size: 26 - 14 AWG (0.14 - 2.5 mm 2 ) Contact Material: Silver- or gold-plated copper alloy Contact Resistance: < 3 mΩ * In dry, non-conductive, non-corrosive environments when protected in a housing rated at least IP54 and disconnected for cycling and maintenance only. EPIC ® HDD Crimp-Terminated 16 AWG (1.5 mm 2 ) EPIC ® HDD Crimp-Terminated 14 AWG (2.5 mm 2 ) EPIC ® HDD Inserts: Derating Curves Technical Data

Upload: lyanh

Post on 01-Dec-2018

225 views

Category:

Documents


0 download

Report

TRANSCRIPT

Page 1: Rect C Its HDD Series - lappusa.com · Cplet Itallation Crimp Dies: 11147100 Crimp Tool: 11147000 Locator: 11147200 Removal Tool: 11161000 Contacts sold separately see below Contacts

EPIC®

Rectangular Connector Inserts

800-774-3539 • www.lappusa.com • www.lappcanada.com • www.lappmexico.com340

Photographs are not to scale and are not true representations of the products in question. For current information go to our website. If not otherwise specified, all values relating to the product are nominal values.

HDD Series

EPIC® HDD SeriesEPIC® HDD series inserts offer the highest possible machined contact density in a compact insert design. With more contacts available in a single insert, smaller connector housings can be used to provide significant panel space savings.

Number of Contacts: 24, 42, 72, 108, 144, 216 (+PE)

Temperature Range: -40°C to +100°C- Short-term: up to +125°C

Pollution Level: 2

Mating Cycles: - Per DIN EN 61984:2008 Service Life Test: Tested to 100 cycles and passed

- Per Contact Thermal Test: Useful service up to 500 cycles is possible at rated voltage and current*

Test Voltage: 2.5 kV

Rated Voltage:- UL/CSA: 600V- IEC: 250V

Rated Current: - UL: 8.5A- CSA: 10A- IEC: 10A

Wire Size: 26 - 14 AWG (0.14 - 2.5 mm2)

Contact Material: Silver- or gold-plated copper alloy

Contact Resistance: < 3 mΩ

* In dry, non-conductive, non-corrosive environments when protected in a housing rated at least IP54 and disconnected for cycling and maintenance only.

EPIC® HDD Crimp-Terminated16 AWG (1.5 mm2)

EPIC® HDD Crimp-Terminated14 AWG (2.5 mm2)

EPIC® HDD Inserts: Derating Curves

Technical Data

Page 2: Rect C Its HDD Series - lappusa.com · Cplet Itallation Crimp Dies: 11147100 Crimp Tool: 11147000 Locator: 11147200 Removal Tool: 11161000 Contacts sold separately see below Contacts

Contact Size Stripping Length (mm)

# of Marking Tracks

Silver Contacts Gold Contacts

mm2 AWG Pin Socket Pin Socket

0.14 - 0.37 26 - 22 8 1 13162000 13163000 13162500 131635000.5 20 8 2 13162100 13163100 13162600 13163600

0.75 - 1.0 18 8 3 13162200 13163200 13162700 131637001.5 16 8 4 13162300 13163300 13162800 131638002.5 14 5.8 5 13162400 13163400 13162900 13163900

800-774-3539 • www.lappusa.com • www.lappcanada.com • www.lappmexico.com 341

Crimp-Terminated

Crimp-Terminated

All dimensions are in mm.

All dimensions are in mm.

Compatible Housing

Compatible Housing

Approvals

Approvals

Photographs are not to scale and are not true representations of the products in question. For current information go to our website. If not otherwise specified, all values relating to the product are nominal values.

Machined Contacts1.6 mm Diameter

Complete the Installation

Crimp Dies:11147100

Crimp Tool:11147000

Locator:11147200

Removal Tool:11161000

View from Cable Side

View from Cable Side

Contacts sold separately, see below

Contacts sold separately, see below

1 part number = 1 contact, sold in bags of 100

EPIC®

Rectangular Connector InsertsHDD Series

Description Plug Receptacle

Crimp-Terminated: Machined Contacts 11285000 11286000

Description Plug Receptacle

Crimp-Terminated: Machined Contacts 11285100 11286100

EPIC® HDD 42 Inserts

HB 10:page 372

HB 6:page 369

EPIC® HDD 24 Inserts

Page 3: Rect C Its HDD Series - lappusa.com · Cplet Itallation Crimp Dies: 11147100 Crimp Tool: 11147000 Locator: 11147200 Removal Tool: 11161000 Contacts sold separately see below Contacts

800-774-3539 • www.lappusa.com • www.lappcanada.com • www.lappmexico.com342

Crimp-Terminated

Complete the Installation

Crimp Dies:11147100

Crimp Tool:11147000

Locator:11147200

Removal Tool:11161000

Contact Size Stripping Length (mm)

# of Marking Tracks

Silver Contacts Gold Contacts

mm2 AWG Pin Socket Pin Socket

0.14 - 0.37 26 - 22 8 1 13162000 13163000 13162500 131635000.5 20 8 2 13162100 13163100 13162600 13163600

0.75 - 1.0 18 8 3 13162200 13163200 13162700 131637001.5 16 8 4 13162300 13163300 13162800 131638002.5 14 5.8 5 13162400 13163400 13162900 13163900

Crimp-Terminated

All dimensions are in mm.

All dimensions are in mm.

Compatible Housing

Compatible Housing

Approvals

Approvals

Photographs are not to scale and are not true representations of the products in question. For current information go to our website. If not otherwise specified, all values relating to the product are nominal values.

Machined Contacts1.6 mm Diameter

Contacts sold separately, see below

Contacts sold separately, see below

1 part number = 1 contact, sold in bags of 100

EPIC®

Rectangular Connector Inserts HDD Series

View from Cable Side

View from Cable SideEPIC® HDD 108 Inserts

HB 24:page 384

HB 16:page 378

Description Plug Receptacle

Crimp-Terminated: Machined Contacts 11285200 11286200

Description Plug Receptacle

Crimp-Terminated: Machined Contacts 11285300 11286300

EPIC® HDD 72 Inserts

Page 4: Rect C Its HDD Series - lappusa.com · Cplet Itallation Crimp Dies: 11147100 Crimp Tool: 11147000 Locator: 11147200 Removal Tool: 11161000 Contacts sold separately see below Contacts

Contact Size Stripping Length (mm)

# of Marking Tracks

Silver Contacts Gold Contacts

mm2 AWG Pin Socket Pin Socket

0.14 - 0.37 26 - 22 8 1 13162000 13163000 13162500 131635000.5 20 8 2 13162100 13163100 13162600 13163600

0.75 - 1.0 18 8 3 13162200 13163200 13162700 131637001.5 16 8 4 13162300 13163300 13162800 131638002.5 14 5.8 5 13162400 13163400 13162900 13163900

800-774-3539 • www.lappusa.com • www.lappcanada.com • www.lappmexico.com 343

All dimensions are in mm.

All dimensions are in mm.

Compatible Housing

Compatible Housing

Approvals

Approvals

Photographs are not to scale and are not true representations of the products in question. For current information go to our website. If not otherwise specified, all values relating to the product are nominal values.

Machined Contacts1.6 mm Diameter

Complete the Installation

Crimp Dies:11147100

Crimp Tool:11147000

Locator:11147200

Removal Tool:11161000

Contacts sold separately, see below

Contacts sold separately, see below

1 part number = 1 contact, sold in bags of 100

EPIC®

Rectangular Connector InsertsHDD Series

Crimp-TerminatedView from Cable Side

Crimp-TerminatedView from Cable Side

HB 32:page 390

HB 48:page 392

EPIC® HDD 216 Inserts

EPIC® HDD 144 Inserts

Description Contacts Plug Receptacle

Crimp-Terminated: Machined Contacts #1 - 72 11285200 11286200#73 - 144 11285400 11286400

Description Contacts Plug Receptacle

Crimp-Terminated: Machined Contacts #1 - 108 11285300 11286300#109 - 216 11285500 11286500


Crimp contacts - ps-center.co.jp · WAIN 17-02 contacts Can not be compatible use with above two 10A Crimp contacts. Contact resistance≤3mΩ notbecompatible se Crimp contacts 21.5

851 Series - docs.rs-online.com · Tableau comparatif / Cross refence list Version 851 avec contacts à sertir (protection vert olive) 851 Version with crimp contacts (olive green

C O N T A C T C A T A L O G - Air Electro, · PDF fileA Mil-Spec crimp contact - we make it! From standard crimp contacts to reduced crimp barrels or custom designed for unique wire

PLASTIC R SERIES CONNECTORS SERIES - Connector …For TNC, SMA connectors Accessories Insulator for crimp contacts Crimp contacts ... Assembly onto cable Connectors, accessories and

Crimp & Crimp Interchange

MDMA - Connectors, Electrical, Rectangular, …tac-company.jp/_src/sc899/MDMA_Rev203.pdfMDMA - Connectors, Electrical, Rectangular, Microminiature with Removable crimp contacts compliant

RENNSTEIG - Abbeon · 2017. 8. 4. · The Rennsteig Solar Crimp System is unique in the industry. We offer the option (different Crimp Die Sets) to crimp all common terminals/contacts

Product-Information Crimp Kontakte Crimping Contacts

PRODUCTS/SERVICES EQUIPMENT CONTACT - …€¦ ·  · 2017-07-27PRODUCTS/SERVICES EQUIPMENT CONTACT. 1 ... crimping stripping Stripping machine Crimp Center contacts ... Microsoft

CombiTac Übersicht | CombiTac Overview | CombiTac Vue d ...en)_hi.pdfContact termination type Crimp Crimp, PCB, screw Delivery Assembled (contacts separate) Assembled (contacts separate)

STD Series Multi-Wire Connectors...The requirements for crimp connectors are depicted in IEC 60352, part 2. Note: Low currents and voltages: ZIPport standard contacts (screw and crimp)

Magna Mate - Amphenol Sine Systems · Magna|Mate Contacts Contacts RADSOK ® Contacts Crimp Barrel Contact Flat Hole Tail Contact Screw Tail Contact RADSOK® Technical Data High Reliability

SolderTacts - IS-Rayfast · For digital and RF signals, SolderTacts contacts offer better signal transmission than obtained with crimp contacts. They reduce crosstalk, signal attenuation,

RELAY SOCKET CRIMP CONTACTS, 10 AMPS SOCLE A SERTIR …eu.leachint.fr/.../2015/04/socket-socle-S400S401S402.pdf · 2020. 2. 7. · s400, s401, s402 relay socket crimp contacts, 10

CONTACTS - Carlisle Interconnect Technologies · contacts to reduced crimp barrels or custom designed for unique wire applications, we are the leading manufacturer of crimp contacts

Series 79 Micro-Crimp Connectors and Accessories · 2018. 8. 31. · Series 79 Supported Crimp Contacts The main difference compared to standard Micro-D’s Snap-in size #23 crimp

Contacts - RS ComponentsCrimp contacts - MILITARY STANDARD 8-11 b. Crimp contacts - EUROPEAN STANDARD 12-13 c. PCB d. Thermo-couples 3. POWER CONTACTS 16-19 a. Size 8 b. Specific range

Solar Energy - Powell · 2010. 4. 9. · with screw and crimp terminations. A selection of crimp contacts for hand crimp tools and for crimp machines enables a reliable termination

TE Connectivity Automation & Control...• 2.5mm contacts of the HE and HA series are available in screw, cage clamp or crimp versions, both gold and silver plated • 2.4mm contacts

Size #23 Crimp Contacts for Series 80 High-Speed Mighty

Contacts - mouser.comCrimp contacts - MILITARY STANDARD 8-11 b. Crimp contacts - EUROPEAN STANDARD 12-13 c. PCB contacts 14 d. Thermo-couples contacts 15 3. POWER CONTACTS 16-19 a

Contacts · Crimp contacts - MILITARY STANDARD 8-11 b. Crimp contacts - EUROPEAN STANDARD 12-13 c. PCB contacts 14 d. Thermo-couples contacts 15 3. POWER CONTACTS 16-19 a. Size 8

EN3155 CONTACTS - Air Electro, Inc · EN3155 CONTACTS. Introduction We offer multiple Mil-Spec crimp contact styles. From standard crimp contacts to reduced crimp barrels or custom

Deutsch Connectors - Automation | ElecDirect€¦ · HDT‑48‑00 Crimp Tool The HDT‑48‑00 Crimp Tool is the most commonly used tool for solid contacts, and will crimp a wide

· PDF fileAmphenol Miniature connectors can incorporate shielded coax contacts. Size 8 and 12 crimp coax contacts are available in PT-SE, SP-SE, MS/PT-SE

Series 791 Connectors - Glenair, Inc. · 2020-01-07 · Series 791 Connectors Ultraminiature Rectangular Connectors Pin and Socket Contacts for Series 79 Connectors Crimp Contacts

RR-HR - Mouser Electronics · D-Sub connectors - Stamped and Formed Contacts RR-HR / E11 REAR RELEASE CRIMP CONNECTORS ... • hand crimp tool for single contacts AWG 20 to 28 17D

Specifications - schaltbau.com · EP KD Rx Sx Ex Receptacle, pin contacts included 4 EP BD Rx Sx Ex Dummy receptacle, 1 pin contact for feedback included 4 Contacts Crimp contacts

Cannon Rack & Panel Connectors...Crimp, coax, power, printed circuit and wire wrappable post style contacts. Uses standard DPX crimp, insertion/extraction tooling. Waveguide connections

Electro crimp-contacts-india-pvt-ltd

Gesamtbaugruppe HVR 50 AInnenleiter "B" an angegebener Position auf die Stromkabel "A" crimpen. Der Crimp ist nach RN_031-02 auszuführen. Crimp power contacts "B" onto the power cables

crimp to crimp - Smans

1.27 Crimp Contacts Training

INTERCONNECT SOLUTIONS - Acte Elektronikk · 2019. 5. 21. · alternative to Elco 8016 series • Gold over nickel plating for wire hole, PCB, wire-wrap and crimp contacts • Crimp

Cannon Quadrax Contacts · rear removable crimp socket quadrax contacts 7 - Jam nut receptacle with rear thread; accommodates rear release, rear removable crimp pin quadrax contacts