recommended spare parts and often used accessories

Issue 07.14 Y070.085/GB Subject to changes without notice!

Recommended spare parts and often used accessories Electric Actuators

Rotary Actuators 2SA5 Linear Actuators 2SB5 Part-turn Actuators 2SC5 and 2SG5

for types 2 S 5 - - 34

SIPOS 5 Flash/HiMod

Recommended spare parts and often used accessories SIPOS 5 Flash/HiMod Definition of spare parts

Y070.085/GB

Recommended spare parts Base order No. 1)

(2SY5 + part No.)

part No.

Short description Explosion views

see attachment...

2 ye

ars

/ co

mm

issi

onin

g

8 ye

ars

Delivery period

[weeks]

Spare part definition + detailed description

Page

Mechanical

....216-….. Output shaft insert A a, b 2 5 4 8-9

....218-….. Gasket set for commissioning all depictions

10 - 2 9

Gasket set, complete - 50

....220-..... Signaling gear, complete a, b, c, d, e 5 15 2 10

....225-….. Cover for position recording a, b, c, d, e, p 5 5 2 11

....250-..... Hand manual a, b, c, d, e, p 5 5 4 12

....252-..... Handle / hand crank / hand wheel a, b, c, d, e, p 5 5 2 13

Often used accessories

Short description

Order No.

Delivery period

[week]

Detailed description

Page

Attachments f,g Electronics ECOTRON - Connections, housings, control electronics 16

(explosion views) i,k PROFITRON/HiMod - Connections, housings, control electronics 17

a Mechanical Rotary actuator - 2SA5 . 1/2/3/4.- 18

b - 2SA5 . 5/6/7/8.- 19

c Linear actuator - 2SB5 . 1/2/3/4.- 20

d - 2SB5 . 5/6.- 21

p small Part-turn actuator - 2SG5 . . .- 22

e Part-turn actuator - 2SC5 . . .- 23

1) Numbers printed in bold are part Nos. of the explosion views!

Electronics

....001-.....-.... Electronics unit f, g, i, k 5 10 4 3-5

....041-..... Electronics housing cover f, g, i, k 2 2 2 6

....055-..... PC board plugs f, g, i, k 5 2 7

COM-SIPOS PC parameterization program 2SX5100-3PC02 1 14

Parking socket 2SX5303-0PS01 2 14

Separate mounting 2SX5300-. GA . . 4 15

Suggested minimum quantity for spare parts for

operating time [%]


Y070.085/GB

Electronics 2SY5001- Electronics unit

Version: painted RAL7030, completely assembled, including mounting parts for mounting to the actuator's gear unit and mounting instruction. Connection openings are covered for transport/stocks. (including the parts 010 – 016, 034, 035, 041 and 042 that are used depending on the version).

Notes: - Electronics units are function-tested and are documented with a separate serial number and order number (2SY5...-) and are specified on a neutral rating plate. A wiring diagram is included. - Current data such as the number of elapsed hours of the motor cannot be imported from the original electronics unit. Wherever applicable, maintenance intervals must be reparameterized.

Definition: see below!

Identical electronics unit:

Determining spare parts with importing of all actuator-specific data in the EEPROM by the supplier. (Electronics unit can only be used for absolutely identical actuator versions, e.g. rotary actuators with 37-125Nm and 5-40 rpm.)

Example: supplied type 2 S A 5 0 3 1 - 2 C D 0 0 - 3 A B 3 bold = relevant data positions

Identical electronics unit 2 S Y 5 0 0 1 - 0 C D 3 0 - 3 A B 3 bold = shifted data positions

Actuator-neutral electronics unit:

Determining spare parts exclusively taking into account the data relevant to the version (Electronics unit largely actuator-neutral. Actuator type, torques or cut-off forces and speed, output speed or positioning time are reimported from the old unit via the serial interface using the PC parameterization program COM-SIPOS, Order No. 2SX5100-3PC02 and are placed in the replacement unit's EEPROM.)

Example: supplied type 2 S C 5 5 4 5 - 1 C E 1 7 - 4 D G 4 bold = relevant data positions

Actuator-neutral electronics unit 2 S Y 5 0 0 1 - 5 P S 0 0 - 4 D G 4 bold = shifted data positions

Note: The actuator-neutral electronics unit for modulating actuators 2S.55..- can also be used for standard actuators 2S.50! The actuator-neutral electronics unit for continuous modulating actuators 2S.58..- can also be used for modulating actuators 2S.55 and for standard actuators 2S.50!

1) electronics unit for 3 phase power supply

Version Actuator types

small electronics unit „S“ 2SA501., 2SA502., 2SA503., 2SA504.-.C, 2SA551., 2SA552., 2SA553., 2SA554.-.C, 2SB551., 2SB552., 2SB553., 2SB554., 2SC5... and 2SG5...;HiMod: 2SA581., 2SA582., 2SA583., 2SA584.-.C, 2SB581., 2SB582., 2SB583. and 2SB584.

big electronics unit „T“ 2SA504.-.D, 2SA504.-.E, 2SA505., 2SA506., 2SA507., 2SA508., 2SA554.-.D, 2SA555., 2SA556., 2SA557., 2SA558., 2SB555. and 2SB556.; HiMod: 2SA584.-.D, 2SA585., 2SA586., 2SA587., 2SA588., 2SB585. and 2SB586.

A → 0 B → 1 C → 2 G → 3

B → B D → D E → S 1)

E → T 1)

J → J

B D S (small electronics unit resp. motor up to 1.5 kW) T (big electronics unit resp. motor 3 or 5.5 kW)

J

B → B D → D E → S 1)

E → T 1)

J → J

B D S (small electronics unit resp. motor up to1.5 kW) T (big electronics unit resp. motor 3 or 5.5 kW)

J


Y070.085/GB

Order No.

add. features Description

2SY5001 - - Electronics unit

0 for standard 2S.50 5 for modulating duty 2S.55 (actuator-neutral version can also be used for 2S.50) 8 for HiMod 2S.58 (actuator-neutral version can also be used for 2S.55 and 2S.50)

Rotary actuators 2SA5 Linear actuators 2SB5 Part-turn actuators 2SC5 resp. 2SG5

A 1,25 – 10 rpm without B 2,5 – 20 rpm C 5 – 40 rpm 25-320 mm/min 160 –8 resp. 80-10 sec/90° D 10 – 80 rpm E 20 – 160 rpm P actuator-neutral requires “0” in 11th and 12th place of order No.

B 1x AC 110-115 V without D 1x AC 220-230 V J 3x AC 190-200 V S 3x AC 380-460 V small electronics unit (motor up to 1.5 kW) T big electronics unit (motor 3 or 5.5 kW)

Rotary actuators 2SA5 Linear actuators 2SB5 Part-turn actuators 2SC5 resp. 2SG5

0 actuator-neutral resp. 2SC5.0. 2SG5.0. without 1 2SA5.1. 2SB5.1. 2SC5.1. 2SG5.1. 2 2SA5.2. 2SB5.2. 2SC5.2. 2SG5.2. 3 2SA5.3. 2SB5.3. 2SC5.3. 4 2SA5.4. 2SB5.4. 2SC5.4. 5 2SA5.5. 2SB5.5. 2SC5.5. 6 2SA5.6. 2SB5.6. 2SC5.6. 7 2SA5.7. 8 2SA5.8.

0 actuator-neutral resp. for rotary actuator 2SA5 without

1 for linear actuator 2SB5 2 for part-turn actuator 2SC5 3 for small part-turn actuator 2SG5

3 Control electronics ECOTRON without 4 Control electronics PROFITRON/HiMod

A without add-ons for electronics unit without B Relay board C PROFIBUS DP with V1 and V2 services (V2 services only with PROFITRON/HiMod) - 1-channel D PROFIBUS DP with V1 and V2 services (only with PROFITRON/HiMod) - 2-channel E MODBUS RTU - 1-channel F MODBUS RTU - 2-channel (only with PROFITRON/HiMod) G PROFIBUS DP - 1-channel, Micromaster compatible (incl. part 033) H PROFIBUS DP - 2-channel, Micromaster compatible (incl. part 033) J for HART without K for HART + relay board

A standard software-function without B Positioner for standard (only PROFITRON) for modul. duty (only PROFITRON) for HiMod without C Process controller for modul. duty (only PROFITRON) for HiMod D travel dependent output speed adjustment (only PROFITRON) E Positioner + travel dependent output speed adjustment for modul. duty (only PROFITRON) for HiMod F external analog output speed setpoint (only PROFITRON) G Positioner + external analog output speed setpoint for modul. duty (only PROFITRON) for HiMod H Positioner with proportional control / split-range functionality for modul. duty (only PROFITRON) for HiMod J travel dependent freely adjustable positioning times (only PROFITRON) K Positioner + travel dependent freely adjustable for modul. duty (only PROFITRON) positioning times for HiMod L Process controller + travel dependent freely adjustable for modul. duty (only PROFITRON) positioning times for HiMod

3 for direct connection without 4 for round plug / field bus interface resp. for electrical isolation of analog signals without

Additional features see following page

*) Differentiation only necessary if the data is not read out of the EEPROM of the old unit with the PC parameterization program COM-SIPOS (Order No. 2SX5100-3PC02) via the serial interface RS 232 or Bluetooth resp. the fieldbus interface RS 485 (a change of the actuator type as also of the factory parameters is not possible via fieldbus) and is read into the replacement electronics. Actuator-neutral electronics unit: 2SY5001-.P.00-....

List price

*)

*)

*)

add. cost


Y070.085/GB

Additional features for electronics unit 2SY5001-… (add. "-Z" to order No.)

add. features add. cost ECOTRON M 1 8 Automatic motor stop period heater S 2 1 Analog actual position value 4-20mA (only standard version) PROFITRON M 1 8 Automatic motor stop period heater without P 4 1 prepared for „non-intrusive P 4 2 Control PC board prepared for „non-intrusive“ (only in combination with „S31“) S 3 8 prepared for external COM-SIPOS interface Setting/programming K 7 0 for modulating duty with reduced cycles S4/S5 (only standard version) V 5 0 Test to IEC 61800-2 without Y 0 5 Torque dependent cut-off in end position: Y 1 1 Parameterization to customer requirement specify serial number! Y 3 3 Binary and analog inputs freely usable via fieldbus without

Y . .

project dependent parameterization: Y12, Y14, Y15, Y17, Y19, Y50, Y90

Y 9 9 Customer specific software-programming on requestCustomer plate B 0 0 with freely definable text Language for rating plate B . . Rating-plate foreign-language/English:

CN (B58), CZ (B55), DK (B62), ES (B51), FI (B54), FR (B50), GB (B49), GR (B60), IT (B52), PL (B57), PT (B64), RO (B59), RU (B53), SA (B65), SE (B56), SK (B61), TR (B63)

without

SIPOS 5 Micromaster (delivered until 2001)

S 3 1 Connection electronics unit to gear unit acc. to SIPOS 5 Micromaster P 1 5 Connection with PG-threads (only applicable for PROFIBUS connection) without

Other C 2 1 special plug connection with view glass, with „C10“ with „C11“ C 5 0 Bluetooth interface PROFITRON (Cover made of Macrolon) HiMod (instead of external COM-SIPOS interface!) without C 5 1 Bluetooth interface PROFITRON (Cover made of metal) HiMod (instead of external COM-SIPOS interface!) without C 6 0 Binary inputs OPEN/CLOSE for 120V AC C 6 1 Parameterization for project Lünen with signaling output 1 via relay C 6 2 Binary inputs OPEN/CLOSE/STOP/EMERGENCY for 230 V AC (external power supply) C 6 3 Binary inputs OPEN/CLOSE for 115 V AC (internal power supply) C 6 9 Protective circuit for position feedback (V58) removed from the control board without E 2 1 Version with safety relay K 5 1 Protection class IP 68 for ECOTRON and PROFITRON with „L38“ for HiMod P 4 0 prepared for magnetic position sensor without S 6 0 Local controls without bush buttons S 6 1 Electronics housing cover small electronics unit (motor up to 1.5 kW) made of metal big electronics unit (Motor 3 or 5.5 kW) T 0 6 Temperature range -30°C to +60°C without special wiring diagram (only applicable for the electrical connection)

project dependent wiring diagram: C10, C11, C15, C16, C23, C25, D00, D01, D02, D03, D04, D05

without

C . . D . .

Finish paint L 3 0 unpainted L 3 2 Double thick-film paint 150 µm (instead of 80 µm) L 3 8 Very high corrosion protection, corrosivity category C5 with long protection time Y 3 5 Top coat of paint for colors other than RAL7030: specify required color!

Σ List price = List price + Σ add. cost .......... [...]

Electronics unit (Stell-E001)


Y070.085/GB

Order No.

add. features Description List price

2SY5041 - Electronics housing cover (painted RAL7030, complete with push buttons, operating foil, O-ring and mounting parts)

3 E D 0 1 ECOTRON small electronics unit (motor up to 1.5 kW) standard 3 M C 0 1 made of metal (S61) 3 E D 3 4 big electronics unit (motor from 3 kW) 1) standard 3 M C 3 4 made of metal (S61) 4 E D 0 1 PROFITRON small electronics unit (motor up to 1.5 kW) standard 4 M C 0 1 made of metal (S61) 4 E D 3 4 big electronics unit (motor from 3 kW) 1) standard 4 M C 3 4 made of metal (S61) 8 M C 0 1 HiMod small electronics unit (motor up to 1.5 kW) made of metal 8 M C 3 4 big electronics unit (motor from 3 kW) 1)

Additional features (add. "-Z" to order No.)

add. features add. cost

Push buttons S 6 0 without push buttons HiMod C 5 0 prepared for „Bluetooth“ small electronics unit made of Macrolon big electronics unit 1) Finish paint L 3 2 Double thick-film paint 150 µm (instead of 80 µm) (only metal version)

L 3 8

Very high corrosion protection, (only metal version) corrosivity category C5 with long protection time

Y 3 5 Top coat of paint for colors other than RAL7030: specify required color!


Padlock Order No.: 2SX5302-0VS00 Protection cover for the local control station Order No.: 2SX5302-0SD00

Electronics housing cover (Stell-E041)

1) big electronics unit

Version Actuator type

big electronics unit (from 3 kW) 2SA504.-.D, 2SA504.-.E, 2SA505., 2SA506., 2SA507., 2SA508., 2SA554.-.D, 2SA555., 2SA556., 2SA557., 2SA558., 2SB555. and 2SB556.;HiMod: 2SA584.-.D, 2SA585., 2SA586., 2SA587., 2SA588., 2SB585. and 2SB586.


Y070.085/GB

Order No.

Description List price

2SY5055 - 0 S T 1 0 PC board plugs [...]

complete set for power and control wire connections incl. markers (including the plug versions X1, X2.1, X2.2, .X3.1 and X3.2)


Y070.085/GB

Mechanical

2SY5216- Output shaft insert A Version: depending on the version with thrust washers, thrust needle rims, spigot ring, shaft sealing ring (includes part 217)

Definition: To uniquely define the spare part, include the data positions of the actuators for which use is intended in the order number of the spare part.

Example: supplied type 2 S A 5 5 4 3 - 0 C E 1 0 - 3 B A 3 bold = relevant data positions

Output shaft insert A for F14 flange 2 S Y 5 2 1 6 - 4 E A 3 0 bold = shifted data positions

Order No.

add. features Description

2SY5216 - E A Output shaft insert A 1) << Enquire with stating the serial number if necessary! >> Rotary actuator standard Rotary actuator modulating duty 1 9-30 Nm 10-20 Nm 2 18-60 Nm 20-40 Nm 3 37-125 Nm 40-80 Nm 4 75-250 Nm 87-175 Nm 5 150-500 Nm 175-350 Nm 6 300-1000 Nm 350-700 Nm 7 2) 3) 600-2000 Nm 700-1400 Nm

8 2) 1200-4000 Nm 1400-2800 Nm

Flange DIN ISO 5210 DIN 3210

0 F07 ---

1 F10 G0

2 F12 ---

3 F14 G1/2

4 F16 G3

5 F25 G4

6 F30 G5

Shaft standard 9-30 18-60 37-125 75-250 150-500 300-1000 600-2000 1200-4000 List price Type DIN modul. duty 10-20 20-40 40-80 87-175 175-350 350-700 700-1400 1400-2800

0 A ISO 5210 on request

adjacent 9 H0A A 3210

Additional features see following page

Output shaft insert A (Stell-E216)

1) Since mid 2002 modified parts are used. Enquire with stating the serial number (see name plate) if necessary! For replacements before mid 2002: 2nd block „EE“ instead of „EA“!

2) Since end 2007 modified parts are used. Enquire with stating the serial number (see name plate) if necessary! For replacements before end 2007: 2nd block „EE“ instead of „EA“!

3) Beginning 2009 modified parts will be used. Inquire with stating the serial number (see name plate) if necessary!


Y070.085/GB

Additional features for Output shaft insert A 2SY5216-.E... (add. "-Z" to order No.)


Acme screw thread 1) Y 1 8 for gear size 1 2) gear size 3 2) gear size 4 2) Flange F14 / G1/2 and F16 / G3 Flange F25 / G4 Flange F30 / G5 Special thread / design Y 2 1 Output shaft type A with special thread / design on request non-corroding Y 7 0 A-insert (stem nut) made of stainless steel on request


Order No.


2SY5218 - D S 1 0 Gasket set (O-rings, square seals and shaft sealing rings, complete)

0

Recommended gasket set for commissioning for 2S.5-actuators (O-rings for electronics housing cover, signaling gear hood and connection cover/hood)

1 Gear size 1 2) 3 Gear size 3 2) 4 Gear size 4 2) 6 2SG5


Kurzangabe add. cost

Ambient condition T 0 9 Temperature range -20°C to +90°C for gear unit

for recommended gasket set on request Gear size 1 1) Gear size 3 and 4 1)


Gasket set (Stell-E218)

1) Add. cost for bushings with acme screw thread LH according to DIN 103, Part 2. The acme screw thread must be expressly stated, e.g. Tr 16 x 4 LH DIN 103.

2) Rotary actuators Linear actuators Part-turn actuators

standard modul. duty modul. duty standard modul. duty

Gear size 1 2SA501.- 2SA5.1.- 2SB5.1.- 2SC500.- 2SC550.- 2SA502.- 2SA5.2.- 2SB5.2.- 2SC501.- 2SC551.- 2SC502.- 2SC552.- 2SC503.- 2SC504.- Gear size 3 2SA503.- 2SA5.3.- 2SB5.3.- 2SC505.- 2SC553.- 2SA504.- 2SA5.4.- 2SB5.4.- 2SC506.- 2SC554.- Gear size 4 2SA505.- 2SA5.5.- 2SB5.5.- 2SA506.- 2SA5.6.- 2SB5.6.- 2SA507.- 2SA5.7.- 2SA508.- 2SA5.8.-


Y070.085/GB

Order No.


2SY5220 - MG Signaling gear, complete 1) 2) (complete with potentiometer mounted and adjusted) contains the parts 221 and 222 used depending on the version

0 0 2 for standard without mechanical position indicator 0 0 3 SIPOS 5 Flash with mechanical position indicator 5 0 2 for modul. duty without mechanical position indicator 5 0 3 SIPOS 5 Flash with mechanical position indicator



Standard actuator in S4/S5 duty

K 7 0 for modulating duty with reduced cycles S4/S5 on request

> 4020 revs/stroke P 3 4 signaling gear for > 4020 revs/stroke (only 2SA5) non-contact type position transmitter

P 4 0 magnetic position sensor (instead potentiometer)

shorter mechanical position indicator

K 5 1 for protection class IP 68 without L 3 8 for very high corrosion protection, corrosivity category C5 with long protection time S 7 1 for signaling gear hood made of metal


Signaling gear (Stell-E220)

1) The pressing-out tool 2SX5501-0CD02 is needed to release the contacts pins in part 036.

2) Secure screws with Loctite 222!


Y070.085/GB

Order No.


2SY5225 - 0 0 Cover for position recording (complete with O-ring and mounting parts)

0 M D for Flash 2SA5, 2SB5 and 2SC5 standard 0 M N for non-intrusive position encoder „P41“ 6 M H for 2SG5 made of metal, painted RAL 7030 8 M N for HiMod 2S.58



Cover made of metal K 5 1 Protection class IP 68 for Flash standard with „L38“ for „P41“ with „L38“ S 7 1 Signaling gear hood made of metal for Flash standard for „P41“ S 7 2 Flat metal cover for „P41“ Ambient condition T 0 9 Temperature range -20°C to +90°C for gear unit on request Finish paint L 3 2 Double thick-film paint 150 µm

(instead of 80 µm) (only metal version)for Flash standard

for „P41“ L 3 4 Painting signaling gear hood for Flash standard L 3 8 Very high corrosion protection,

corrosivity category C5 with long protection time (only metal version)

for Flash standard for „P41“ for 2SG5 for HiMod 2S.58 Y 3 5 Top coat of paint for colors other than RAL7030: specify required color!


Cover for position recording (Stell-E225)


Y070.085/GB

Order No.


2SY5250 - Hand manual 1)

(depending on the version, painted RAL7030, complete with support plate, compression spring, connecting cable, O-ring, centrifugal lock for gear size 4, handle and mounting parts)

1 H U 1 0 for Flash Hand manual gear size 1 2) with crank 60mm 3 H U 1 0 Hand manual gear size 3 2) with crank 90mm 1 H M 1 0 for HiMod Hand manual gear size 1 2) with hand wheel 3 H M 1 0 Hand manual gear size 3 2) 4 H U 1 0 for Flash and HiMod Hand manual gear size 4 2) 6 H U 0 0 2SG5 Hand wheel, complete



Hand wheel V 2 5 Hand wheel instead of hand crank Direction of rotation V 2 8 Direction of rotation reference at the hand wheel/crank in counter-clockwise direction Ambient condition T 0 9 Temperature range -20°C to +90°C for gear unit on request Finish paint L 3 2 Double thick-film paint 150 µm (instead of 80 µm) L 3 8 Very high corrosion protection, corrosivity category C5 with long protection time Y 3 5 Top coat of paint for colors other than RAL7030: specify required color!


Hand manual (Stell-E250)

1) The pressing-out tool 2SX5501-0CD02 is needed to release the contacts pins in part 036.





Y070.085/GB

Order No.


2SY5252 - Handle 1) / hand crank / hand wheel (hand crank / wheel painted RAL7030)

1 G M 0 6 for Flash Handle gear size 1 2) and 3 2) for hand crank 1 G M 1 1 for Flash and HiMod Handle gear size 4 2) for hand wheel 6 G M 0 0 2SG5 Handle for hand wheel 1 H H 0 0 for Flash Hand crank 60 mm with handle gear size 1 2) 3 H H 0 0 Hand crank 90 mm with handle gear size 3 2) 1 H M 0 0 for HiMod Hand wheel with handle gear size 1 2) 3 H M 0 0 Hand wheel with handle gear size 3 2) 4 H H 0 0 for Flash and HiMod Hand wheel with handle gear size 4 2)



Hand wheel V 2 5 Hand wheel instead of hand crank on request Direction of rotation V 2 8 Direction of rotation reference at the hand wheel/crank in counter-clockwise direction Finish paint L 3 2 Double thick-film paint 150 µm (instead of 80 µm) L 3 8 Very high corrosion protection, corrosivity category C5 with long protection time Y 3 5 Top coat of paint for colors other than RAL7030: specify required color!


Handle / hand crank / hand wheel (Stell-E252) 1) Secure screw with Loctite 243!




Recommended spare parts and often used accessories SIPOS 5 Flash/HiMod Accessories

Y070.085/GB

Order No.


2SX5100 - 3 P C 0 2 COM-SIPOS PC parameterization program

[...]

(for commissioning, programming, diagnosis, maintenance and visualization)

CD COM-SIPOS

Order No.


2SX5303 - 0 P S 0 1 Parking socket [...] (for direct and plug connection, grey surface coating)

Parking socket (Stell-PSD)

Scope of supply

PC parameterization program User manual DE and GB/US (on CD) Zero-modem cable + USB adapter

Scope of supply

Parking socket Cover with screws

Recommended spare parts and often used accessories SIPOS 5 Flash/HiMod Accessories

Y070.085/GB

Order No.


2SX5300 - G A Installation kit for separate mounting

(anthracite anodized, complete with mounting bracket, tubular steel stirrup and, depending on version, with O-rings, mounting parts, caps or heavy-gauge threaded joint and all parts needed for electrical connection such as covers and plugs etc.)

Add. version of the original

delivery

Length of connecting cable

Version of

connection

4 0 3 S41 + R70 3 m (a)

0 5 + R71 5 m 1 0 + R72 10 m 8 0 3 S47 + R70 3 m

(b)

0 5 + R71 5 m 1 0 + R72 10 m

(a) Fixed cable connection Connecting cable with connection plug hoods (electronics unit and gear unit) completely assembled. Cable ends ready for plugging in.

(b) Fixed cable connection for variable lengths Connecting cable with connection plug hood (electronics unit) and with free ends towards the gear unit, completely assembled. The cable ends to the connection plug hood on the gear unit side must be connected locally after individual cutting to length and in accordance with the included connection diagram. Cable ends ready for plugging in.



Ambient condition T 0 9 Temperature range -20°C to +90°C for gear unit on request Finish paint L 3 2 Painted RAL 7030 L 3 8 Very high corrosion protection, corrosivity category C5 with long protection time


Separate mounting, version shown 2SX5300-4GA..


Attachment f, g Y070.085/GB

Electronics unit ECOTRON (motor up to 1.5 kW) (Stell55)

Electronics unit ECOTRON (motor from 3 kW) (Stell57)


Y070.085/GB Attachment i, k

Electronics unit PROFITRON/HiMod (motor up to 1.5 kW) (Stell54)

Electronics unit PROFITRON/HiMod (motor from 3 kW) (Stell56)


Attachment a Y070.085/GB

Gear unit 2SA5. 1/2/3/4.- (Stell93)

Output shaft B1

Output shaft insert

Reducing flange

Output shaft A


Y070.085/GB Attachment b

Gear unit 2SA5. 5/6/7/8.- (Stell94)

Output shaft B1

Output shaft insert

Reducing flange

Output shaft A


Attachment c Y070.085/GB

Gear with stroke unit 2SB5. 1/2/3/4.- (Stell98)


Y070.085/GB Attachment d

Gear with stroke unit 2SB5. 5/6.- (Stell89)


Attachment p Y070.085/GB

small part-turn gear 2SG5...- (Stell71)


Y070.085/GB Attachment e

Gear with part-turn unit 2SC5...- (Stell90)


Issue 07.14 © SIPOS Aktorik GmbH Y070.085/GB Subject to changes without notice! Im Erlet 2 • D-90518 Altdorf www.sipos.de

recommended spare parts and often used accessories

Documents