recommendations for removal of amps in 3gpp2 specifications july, 2010
TRANSCRIPT
![Page 1: Recommendations for Removal of AMPS in 3GPP2 Specifications July, 2010](https://reader035.vdocuments.mx/reader035/viewer/2022072005/56649cce5503460f9499a025/html5/thumbnails/1.jpg)
Recommendations for Removal of AMPS in 3GPP2 Specifications
July, 2010
![Page 2: Recommendations for Removal of AMPS in 3GPP2 Specifications July, 2010](https://reader035.vdocuments.mx/reader035/viewer/2022072005/56649cce5503460f9499a025/html5/thumbnails/2.jpg)
2
Overview
• Background– AMPS network shut down in 2008, allowing removal of special AMPS blocker requirements
and harmonization of 3GPP and 3GPP2 specifications.
• 3GPP2 AMPS blocker protection/requirements– STD (Single Tone Desense)
• CW blockers at 900kHz (Band 0) or 1.25MHz offset
– In-band IM
• CW blockers at 900kHz/1.7MHz (Band 0) or 1.25MHz/2.05MHz offset
• Modifications to C.S0011 (IS98) and C.S0033 (IS866) specifications– Details in following slides
– BC3 and BC6 specs will not be modified
![Page 3: Recommendations for Removal of AMPS in 3GPP2 Specifications July, 2010](https://reader035.vdocuments.mx/reader035/viewer/2022072005/56649cce5503460f9499a025/html5/thumbnails/3.jpg)
3
• Eliminate existing Single Tone Desense requirement (C.S0011 3.5.2, C.S0033 3.3.2)
• Replace with Narrow Band Blocking similar to 3GPP and apply to all bands (except BC3 and BC6)
Single Tone Desense
Parameter Unit Test-1
Îor dBm/1.23MHz REFSENS+3dB
Iblocking (CW) dBm -30
Fuw (offset) MHz±0.9 for BC0/3
±1.25 for BC1/4
UE transmitted mean power dBm+15 for BC1/3/4
+23 for other BCs
Parameter Unit Level
Îor dBm/1.23MHz REFSENS+10dB
Iblocking (GMSK) dBm -45
Fuw (offset) MHz±1.10 for BC0
±1.27 for other BC’s
UE transmitted mean power dBm 20
![Page 4: Recommendations for Removal of AMPS in 3GPP2 Specifications July, 2010](https://reader035.vdocuments.mx/reader035/viewer/2022072005/56649cce5503460f9499a025/html5/thumbnails/4.jpg)
4
• Modify existing intermodulation requirement (C.S0011 3.5.3, C.S0033 3.3.3)
• Replace with close-in and far-out IM requirements for all bands (except BC3 and BC6)
Close-In
Far-Out
Intermodulation
Parameter UnitTest-1/2
(BC0/1/3/4)Test-1/2
(BC 6 Only)Test-3/4
(BC0 only)Test-5/6
(BC0 only)Îor dBm/1.23MHz REFSENS+3dB REFSENS+3dB REFSENS+14dB REFSENS+25dB
Iouw1 (CW) dBm -43 -48 -32 -21
Iouw2 (CW) dBm -43 -48 -32 -21
Fuw1 (offset) MHz±0.9 for BC0/3
±1.25 for BC1/4±2.5 ±0.9 ±0.9
Fuw2 (offset) MHz±1.7 for BC0/3
±2.05 for BC1/4±4.9 ±1.7 ±1.7
Parameter Unit LevelÎor dBm/1.23MHz REFSENS+10dB
Iouw1 (GMSK) dBm -46Iouw2 (CW) dBm -46
Fuw1 (offset) MHz 1.27 -1.27
Fuw2 (offset) MHz 2.64 -2.64
UE transmitted mean power dBm 20
Parameter Unit LevelÎor dBm/1.23MHz REFSENS+3dBIouw1 (CW) dBm -46Iouw2 mean power (forward link CDMA) dBm -46Fuw1 (offset) MHz 2.5 -2.5Fuw2 (offset) MHz 4.9 -4.9UE transmitted mean power dBm 20
![Page 5: Recommendations for Removal of AMPS in 3GPP2 Specifications July, 2010](https://reader035.vdocuments.mx/reader035/viewer/2022072005/56649cce5503460f9499a025/html5/thumbnails/5.jpg)
5
Adjacent Channel
• Existing Adjacent Channel Selectivity requirement (C.S0011 3.5.4, C.S0033 3.3.4)
• Align with 3GPP and apply to all bands (except BC3 and BC6)
Parameter Unit Case-1 Case-2
Îor dBm/1.23MHz REFSENS+14dB REFSENS+41dB
Ioac mean power (forward link CDMA jammer)
dBm -52 -25
Fuw (offset) MHz +/-1.525 +/-1.525
UE transmitted mean power dBm 20 20
Parameter Unit Level
Îor dBm/1.23MHz REFSENS+3dB
Ioac (forward link CDMA) dBm -37
Fuw (offset) MHz ±2.50 for BC6 only