990-1427A 07/2003

®®®®

Receiving & Unpacking Guide

Symmetra PX 80 kW 208/400 V

1 System Components

Symmetra® PX

10 - 40 kW, 200 V

Basic Opera

tion Guide

DOCUMENT STORAGE

?

5.2”/132 mm

27.5”/700 mm19”/483 mm

82”/2080 mm

36”/915 mm

24”/610 mm

UPS (Empty)650 lb./295 kg

Power Module60 lb./26 kg

2 Important Safety InstructionsSAVE THESE INSTRUCTIONSThis guide contains important instructions that should be followed when handling the Symmetra PX UPS, Battery Enclosures, and Batteries.

Symbols used in this Guide

Weight Symbols

3 Receiving UPS Frame & Modules/Removal of Plastic & Corner Protection

Indicates important information.

Indicates a heavy load that should not be lifted without assistance.

Indicates that more information is available on this subject in a different section of this manual.

Do not lift heavy loads without assistance.

<40 lb.<18 kg

40 - 70 lb.18 - 32 kg

70 - 120 lb.32 - 54 kg

>120 lb.>54 kg

Inspect shipment and verify that labeled boxes match purchase order.

If any shipping damage has been detected, contact APC (see Customer Support in this guide).

Shipping materials are recyclable. Please re-use or dispose of appropriately.

Symmetra PX 10-80 kW Receiving & Unpacking

4 Moving to Installation SiteDoorway Clearance (for UPS on pallet)

Symmetra TM

PXQuick-Start User Guide

Symmetra TM

PXQuick-Start User Guide

Ramp

If UPS height exceeds doorway height, remove from pallet and wheel through door (see Removing from Pallet Section).

47 in. (1200 mm)

91” (2300 mm)

Symmetra PX 10-80 kW Receiving & Unpacking Guide

5 Removing from Pallet

Symmetra PXQuick-Start User Guide

Use 13/14 mm wrench (shipped with unit) for the removal of ship-ping brackets and adjustment of stabilizing feet

Place ramp as shown, aligning strips on ramp with strip on front edge of pallet

Remove card-board cover and bag

Remove 13 mm hex bolts (4 brackets)

VelcroStrips

VelcroStrips

1

2

3

Two people to rollUPS from pallet

4

Doorway Clearance for UPS

6 Operating Space

>82” / 2080 mm

>24” >610 mm Center of Gravity

(UPS Emty)

The UPS is heavy: 1166 lb/529 kg in maximum configuration. Ensure that the floor can support the total weight of the configuration when concentrated on the stabilizing feet.

Proceed to the Electrical Installation Guide. If you have purchased any optional equipment, refer to applicable guides.

UPS

24” / 610 mm

36” / 915 mm (208 V) 700 mm (400 V)

36” / 915 mm

36” / 915 mm (208 V) 700 mm (400 V)

MinimumFront Clearance

MinimumRear Clearance

Stabilizing Feet

Symmetra PX 10-80 kW Receiving & Unpacking

Operating Environment

7 Customer Support

Install the UPS in an Indoor, Controlled Environment

TemperatureRange:

32°-104°F/0°-40° C

Keep Ventilated

Front-to-RearAirflow

RelativeHumidity: <95%Non-condensing

No Conductive Dust or

Corrosive Fumes

Max. Elevation:

0-10,000 ft./0-3,000 m

Full Load Loss at Nominal Mains: 23,743 BTU/hr (6,957 Watts)

Country Customer Support Country Customer

Support

AustriaBelgiumCzech RepublicDenmarkFinlandFranceGermanyGreeceHungaryIrelandIsraelItalyLuxemburgNetherlandsNorway

0800 99967000800 0272 04790800 10206300800 0272 04799800 11530800800 0272 047900800 0272 047900800 1259240640 20026200800 0272 04791800 945220600800 0272 04790800 2209100800 0272 047900800 0272 0479

PolandPortugalRussiaSlovak RepublicSouth AfricaSpainSwedenSwitzerlandTurkeyUKUkraineUSA & North AmericaOther CountriesFaxeSupport

0801 34591700800 0272 04798800 20027220800 1720630861 27287700800 0272 047900800 0272 04790800 1114690800 261213500800 0272 04790800 50272201 877 537 0607353 91 702055353 91 755275http://www.apcc.com/support