reason to use pgs to its full potential, the operation of pgs’s five training modes must be...
TRANSCRIPT
![Page 1: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/1.jpg)
Reason
• To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood.
![Page 2: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/2.jpg)
Training Objective
• Given a BFV with PGS installed and aligned, the crew will demonstrate how to perform the following exercises:
– Panel gunnery– Force-on-force mode– Scaled gunnery– Tracking training– TOW only
![Page 3: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/3.jpg)
PGS Training Modes
• Panel gunnery
• Force-on-force
• Scaled gunnery (1/10 and 1/2 scale)
• Tracking training
• TOW only
![Page 4: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/4.jpg)
Transparency
• PGS requires the same gunnery procedures as used during live fire gunnery.
![Page 5: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/5.jpg)
Normal Procedures
• BOT/TOT capability
• Use correct range to target
• Apply correct target lead
![Page 6: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/6.jpg)
Reload Turret Position
• AP ammo box: 4080-4620 mils (8 o’clock)
• HE ammo box: 1880-2220 mils (4 o’clock)
• TOW: 5630-6170 mils (11 o’clock)
![Page 7: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/7.jpg)
• Tracer simulation
• Burst simulation:– Ground burst– Burst on target
• TOW obscuration simulation
TBOS Effects
![Page 8: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/8.jpg)
A: Tracer stopped and burst on target is indicated
B: Tracer stopped and ground burst at ammunition impact point.
C C
D
A
B
+
C: Tracer continues until maximum range or hits ground.D: Tracer stopped at top of template, simulation continues until maximum range or hits ground.
TBOS Simulation
![Page 9: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/9.jpg)
TOW Basic 3000 meters
TOW 2/TOW2B 3750 meters
M791 APDS-T1700 meters
M792 HEI-T 3000 meters
M62 TRACER 1100 meters
(tracer burnout 900 m)
Max Range Ammunitions
![Page 10: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/10.jpg)
SI GDRM
HIT
0.2 0.5
R. 950 m
AP
SIMULATION
Graphic Numerical
No Presentation
AT
SI GD
GRAPHIC DISPLAY
SU
TE
CF
XAG
AT
SU
TE
CF
AG
SI GDRM
PGS
M2 TOW2
Combat
SIMULATION
AT
SU
TE
CF
AG
Result Presentation
![Page 11: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/11.jpg)
AT
GDRM
HIT
0.20.5
R. 950 m
AP
SIMULATION
SU
TE
CF
AG
SI
Fire Results
![Page 12: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/12.jpg)
GDRM
HIT
0.2 0.5ASP: 3 o’clock
SIMULATION
AT
SI
SU
TE
CF
AG
Target Results
![Page 13: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/13.jpg)
Engagement Results
• Hit
• Ground Hit
• Max Range
• TOW Stall
• TOW Abort
![Page 14: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/14.jpg)
Firing System Sound and Visual Indications
• 25 mm Main Weapon Gun Fire– Cannon firing sound In intercom
– Front two RDU strobe lamps flash as cannon fires
• TOW Missile Launch– Tow launch sound In intercom
– ATWES fires (if used)
• COAX Machine Gun Fire– Machine gun firing sound In intercom
– Front two RDU strobe lamps flash as machine gun fires
![Page 15: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/15.jpg)
Target System Intercom Indications
• NEAR MISS:– 2 Beeps or– 2 Beeps + “NEAR MISS, DIRECT FIRE”
• HIT (No Effect), MOBILITY KILL or WEAPON KILL:– 4 - 6 Beeps or– 4 - 6 Beeps + “HIT, DIRECT FIRE”– 4 - 6 Beeps + “HIT, MOBILITY” or “HIT, FIREPOWER”
• KILL:– Continuous tones (30 seconds) or– “VEHICLE KILL” + Continuous tones for 30 seconds.
![Page 16: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/16.jpg)
Target System Visual Indications
• NEAR MISS (2 flashes)
• HIT no KILL (4-6 flashes)
• HIT and KILL (continuous flashing)
NOTE: MOBILITY KILL and WEAPON KILL are also indicated with 4-6 flashes.
![Page 17: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/17.jpg)
Target System Hit Functions
• HIT (no KILL)
• HIT with MOBILITY KILL
• HIT with WEAPON KILL
• KILL
![Page 18: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/18.jpg)
Tamper Indications
• Force-on-force– Sound indication– TAMPER indicated on control panel– Visual indication
• Panel gunnery– BIT Indication
NOTE: A BIT indication removes the capability to fire until the system has been corrected.
![Page 19: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/19.jpg)
Summary
• Panel gunnery
• Force-on-force
• Scaled gunnery
• TOW only
• Tracking training
![Page 20: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/20.jpg)
Closing Statement
• To get the maximum training value from PGS, you must be able to operate the system in all five training modes.
![Page 21: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/21.jpg)
![Page 22: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/22.jpg)
Reason
• After PGS training is completed, the crew must ensure:
– PGS is operational, clean and prepared for storage.
– Vehicle is returned to normal configuration.
![Page 23: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/23.jpg)
Training Objective
• Given a BFV with BII and PGS installed, you will perform the following:
– Conduct post operational tasks and after operation PMCS on PGS.
– Return the vehicle to normal configuration.
![Page 24: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/24.jpg)
Summary
• BIT
• Removal of PGS
• After operation PMCS
• Vehicle returned to normal operation
• Turn in PGS set
![Page 25: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/25.jpg)
Closing Statement
• This block of instruction has prepared the crew to:
• Remove, clean, and turn in PGS• Perform vehicle checks and procedures
![Page 26: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/26.jpg)
![Page 27: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/27.jpg)
Reason
• When PGS failures occur, the crew must be able to identify, troubleshoot, and correct the problem.
![Page 28: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/28.jpg)
Training Objective
• Given an operational BFV with PGS installed and aligned, you will demonstrate the following:
– Discuss troubleshooting procedures– Perform BIT initialization and discuss failure
information– Conduct troubleshooting
![Page 29: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/29.jpg)
General Procedures
• Verify vehicle set-up• Restart vehicle and PGS• Verify all connections within PGS• Verify all connections between PGS and BFV• Perform troubleshooting IAW TM 9-6920-710-12&P-
1, Chapters 3 and 4• Check PGS for visible damage• Verify programming of TDRS Memory Card• Replace components if needed
![Page 30: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/30.jpg)
Safety
• No corrective action with vehicle MASTER POWER SWITCH ON and turret power applied.
WARNING
Perform all corrective action with vehicle MASTER POWER SWITCH and TURRET POWER set to OFF. Damage could occur to PGS or vehicle or personnel could be injured if cables are connected or disconnected with vehicle MASTER POWER SWITCH and TURRET POWER are set to ON.
![Page 31: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/31.jpg)
BIT Initialization
• Automatic BIT at power up
• During simulation
• Manual initialization
![Page 32: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/32.jpg)
• NO CONNECTION “X”
• ERROR “X” UNIT
SI GDRM
PGS
LAV v1.1
COMBAT
SIMULATION
AG CABLE W1
SU TRANCEIVER
TE UNIT
AT NO CONNECTION
SI GDRM
SIMULATION
TE
AT ERROR
SU UNIT
AG TRANCEIVER
CF
CF
Error Information
![Page 33: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/33.jpg)
Vehicle Interface Assembly
Vehicle Interface Assembly
Transceiver
Unit
RSI
TargetComputer
TBOSDriver
ControlPanel
VehicleInterface
CAN(Controller Area Network)
W1 W12 W2 W3
![Page 34: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/34.jpg)
Error Presentation
• Intercom announcement
• Pop-up screen on control panel
• Error list
• TDRS memory card
![Page 35: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/35.jpg)
Errors Not Covered By BIT
• Transceiver unit output
• System accuracy
• Insert and remove TDRS Memory Card with power set to OFF
• Vehicle interface
![Page 36: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/36.jpg)
J2
J3
ExpansionUnit
VehicleInterface
Unit
J2
J1
AM1780
DTP J1
ControlPanel
(W3)
J1 J4 J3from TBOS Driver
DTP J3
DTP J4
DTP J2
TPI
(W10)
(W9)(W11)
Vehicle Interface
![Page 37: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/37.jpg)
LED Indications
• Vehicle interface unit
• Target computer unit
• TBOS driver unit
• Remote system interface (RSI) unit
NOTES: 1. Blinking light indicates power applied OK.
2. If not indicating or indicating with steady light a problem is likely to be found in PGS.
![Page 38: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/38.jpg)
Summary
• Troubleshooting procedures
• BIT initialization and failure information
• Practical troubleshooting
![Page 39: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/39.jpg)
Closing Statement
• This block of instruction has prepared you to understand troubleshooting procedures used with PGS.
![Page 40: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/40.jpg)
![Page 41: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/41.jpg)
Reason
• To achieve desired results from PGS, panel targets and vehicles must have retro reflector units and, if needed, LTID’s properly installed.
![Page 42: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/42.jpg)
Training Objective
• Given an LTID, a retro reflector unit set with universal brackets, panel targets, and demonstration vehicles, you will:
– Follow all safety regulations during target preparation.– Prepare an infantry target– Prepare a T80 / BMP frontal target– Prepare a T80 / BMP flank target– Perform target emplacement– Vehicle RRU mounting
![Page 43: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/43.jpg)
Target Lifter Safety
• Place target lifter ON/OFF switch in OFF position.• Disconnect target lifter battery when working on or
around panel targets.• Ensure that RRU and LTID is secure.• Ensure that panel target is secure.• Disconnect power to pyrotechnic target signature
unit, if used, while working around target lifter.
For safety issues, consult manufacturer’s documentation.
![Page 44: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/44.jpg)
Full/Half Scale Installation Procedure
• Temporary installation
– Use Velcro
• Permanent installation
– Bolts and nuts
– Wood screws
![Page 45: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/45.jpg)
• Velcro installation
1/10 Scale Installation Procedure
NOTE. RRU back may need to be built up for flat mounting surface.
![Page 46: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/46.jpg)
Infantry Target
Full/Half Scale 1/10 Scale
50 cm
![Page 47: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/47.jpg)
T80/BMP Frontal
Full/Half Scale 1/10 Scale
Note: LTIDs should be positioned below the RRU using the following dimensions:
Full Scale: 50 cm (20 inches)Half Scale: 50 cm (20 inches)
Tenth Scale: 50 cm (20 inches)
50 cm
![Page 48: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/48.jpg)
T80/BMP Flank
Full/Half Scale 1/10 Scale
Note: LTIDs should be positioned below the RRU using the following dimensions:
Full Scale: 50 cm (20 inches)Half Scale: 50 cm (20 inches)
Tenth Scale: 50 cm (20 inches)
50 cm
![Page 49: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/49.jpg)
Target Emplacement
![Page 50: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/50.jpg)
Vehicles Used With Universal Brackets
• M1 series tank
• M2/M3 BFV
• M113 series APC
• HMMWV
• Light Armored Vehicle LAV (USMC only)
• Amphibious Assault Vehicle AAV (USMC only)
![Page 51: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/51.jpg)
Front Mounting Positions Rear Mounting Positions
Universal RRU Mount(M1 Series Tank)
![Page 52: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/52.jpg)
Front Mounting Positions Rear Mounting Positions
Universal RRU Mount (M2/M3)
![Page 53: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/53.jpg)
Universal RRU Mount (M113A2/A3)
Front mounting positions Rear mounting positions
![Page 54: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/54.jpg)
Universal RRU Mount (M998 series)
Front mounting position Rear mounting position
![Page 55: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/55.jpg)
Universal RRU Mount (LAV-25)
Front mounting positionRear mounting position
![Page 56: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/56.jpg)
Universal RRU Mount (AAV)Front positionRear position
![Page 57: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/57.jpg)
Summary
• Follow all safety regulations during target preparation.
• Prepare an infantry target.
• Prepare a T80 / BMP frontal target.
• Prepare a T80 / BMP flank target.
• Perform target emplacement.
• Vehicle RRU mounting.
![Page 58: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/58.jpg)
Closing Statement
• To achieve the desired training result with PGS, targets must be properly prepared.
![Page 59: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/59.jpg)
![Page 60: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/60.jpg)
Reason
• Proper handling and operation of CGUN gives instructor, evaluator, and observer-controller an important tool during PGS training.
![Page 61: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/61.jpg)
Training Objective
Given a CGUN, an LTID equipped target, and a BFV tank with PGS installed, you will:– Discuss CGUN safety regulations – Perform before operations PMCS and
operational tasks– Operate CGUN in its various modes– Perform after operation PMCS
![Page 62: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/62.jpg)
Summary
• Safety regulations
• Before operation PMCS and operational checks
• Operate CGUN in various modes
• After operations PMCS
![Page 63: Reason To use PGS to its full potential, the operation of PGS’s five training modes must be completely understood](https://reader036.vdocuments.mx/reader036/viewer/2022062423/56649e895503460f94b8e599/html5/thumbnails/63.jpg)
Closing Statement
• This block of instruction has prepared you to properly inspect and operate the CGUN during PGS training.