rear inner wheel well liners 99-07 chevy/gmc classic 1500
TRANSCRIPT
INSTALLATION SHEETrear inner wheel well liners
99-07 CHEVY/GMC CLASSIC 1500/2500/3500
1 2PLEASE READ INSTRUCTIONS CAREFULLY BEFORE STARTING THE INSTALLATION.One person can perform the installation.
Driver Side Wheel Well (A)
Rugged Liner • 200 Universal Dr. • Owosso, MI 48867 • 800-433-3604 • ruggedliner.com © Rugged Liner, 2020 Part# INSTLIK44 REV:11.5.2020
Passenger Side Wheel Well (B)
Note: Trucks without flares go directly to step 3.Note: Trucks with wheel well flares.A. Remove all (8) push pins that hold the wheel flares with a flat tool and discard them.B. Then follow steps 3-5 to install the wheel well liner.C. With the help of an electric drill with 1/4” drill bit use the wheel well flare and wheel house edge as a template. Drill holes through positions 2-7 through the wheel well liner that you just installed.D. Install one Christmas tree fastener (C) through holes 1 & 8 in the wheel well flare and into holes 2-7 in the liner you just drilled holes in.
A
Wheel Flare
1
2
34 5
6
7
8
Wheel Flare
1
2
34 5
6
7
8
C
D
Wheel Flare
Wheel WellLiner
Wheel FlareHole #7
MISSING PARTS???Call Rugged Liner at
800-433-3604Any required parts will be shipped to you directly. (DO NOT return whole kit to store)
VEHICLE PREPARATION:It is important that all areas where the wheel wells mount are clean and free of debris prior to installing.
TOOLS REQUIRED:l Ratchet with 13 mm socket in step 5TOOLS FOR WHEEL FLARES:l Easy removal tool or flat screwdriver in step Al Electric drill with 1/4” drill bit in step A
LIST OF CONTENTS:(A) 1 - Driver Side Wheel Well(B) 1 - Passenger Side Wheel Well
LIK44 KIT:(C) 18 - Christmas Tree Fastener
INSTALLATION SHEET99-07 CHEVY/GMC CLASSIC
1500/2500/3500
54 Tuck the lower corners first and then upper part of the wheel well liner behind the rest of the metal lip of the fender.Using the ratchet with a 13 mm socket, re-install the bolts removed in step 3 into the pre-drilled holes in the plastic liner and into the wheel well housing.Insert Christmas tree fastener (C) into front and rear pre-drilled holes in liner and pre-existing holes in sheet metal 1 & 2.
Fender Lip
Support Bracket Bolts
Rugged Liner • 200 Universal Dr. • Owosso, MI 48867 • 800-433-3604 • ruggedliner.com © Rugged Liner, 2020 Part# INSTLIK44 REV:11.5.2020
6 Repeat steps 3-5 on the passenger side when installing the passenger side wheel well (B).
Start on driver side by locating the top bracket support and remove the interior bolts using a ratchet with 13mm socket.NOTE: Save the bolts in a safe place.
3
BracketSupports
16
21
18
22 DRV20
11 10 9 8 7 6 5 4 3 2
1 1
2
W W C 9 9>HDPE<2
Start on the driver side by setting the driver side wheel well (A) marked as (DRV) inside the inner panel of the truck’s wheel well behind the tire.Make sure the support brackets in step 3are behind the wheel well liner.
12