rear blades - bison · rear blades t/tl/f series nvha series ... ln ln hp ln ° nvhf-152 5 250...

2
NVHL SERIES REAR BLADES T/TL/F SERIES NVHA SERIES REGULAR DUTY SERIES EXTRA HEAVY DUTY SERIES Carretera a Paso Blanco Km. 2 No. 400 / Col. Vista Hermosa C.P. 20905 Jesús María, Aguascalientes, México Tel. (449) 92-BISON / Fax. (449) 922 4767 www.bison.com.mx 01 800 52 BISON

Upload: doannguyet

Post on 27-Jul-2018

232 views

Category:

Documents


0 download

TRANSCRIPT

NVHL SERIES

REAR BLADES

T/TL/F SERIES NVHA SERIES

REGULAR DUTY SERIES

EXTRA HEAVY DUTY SERIES

Carretera a Paso Blanco Km. 2 No. 400 / Col. Vista Hermosa C.P. 20905Jesús María, Aguascalientes, México

Tel. (449) 92-BISON / Fax. (449) 922 4767

www.bison.com.mx01 800 52 BISON

SPECIFICATIONS NVHL-240-XHD NVHL-270-XHD NVHL-300-XHD

Moldboard WidthApproximate weightKing pin diameterMoldboard height & thicknessCutting edge

Maximum tractor hpHitchSwing angleOffset adjustmentTilt adjustment

81240*/1450**

91280*/1490**

101320*/1530**

419” x 5/16” (whit full box frame)

1/2" x 6"

160 (2WD) & 145 (4WD)3 - point cat. II, II quick hitch, III

0 to 45º left or right (manual or hydraulic)1

0 to 32 3/8 left or right (manual or hydraulic)1

0 to 12º up or down (manua or hydraulic)3

ftlb

inin

hpin

SPECIFICATIONS

Moldboard width Approximate weight Moldboard height & thicknessCutting edge

Maximum tractor hp Hitch

Swing angle

Offset adjustmentTilt adjustment

ftlblnln

hp

ln

°

NVHF-152

5250

NVHF-182 NVHF-212

7310

6280

NVH-120-T

4345

NVH-150-T NVH-210-T NVH-240-T NVH-180-T(LT)

5375

6404 (372)

7433

8462

6 left or right

2 5/817’’ x 1/4’’ 1/2” x 6” high carbon-steel blade (3/8” x 4” spring steel blade),

reversible, interchangeable65 (2WD) & 60 (4WD)

3 - point category I and I quick hitch1

18º, 35º and 53º, left or right, 3 forward and 3 reverse positions

6 or 12 left or right7.5º, 15º, 22.5º and 30º up or down

12 1/2’’ x 1/4’’1/2" x 6" high carbon-steel

blade, reversible, interchangeable

55 (2WD) & 50 (4WD)3 - point category I and

I quick hitch1 20º, 40º and 60º,

left or right, 3 forward and 3 reverse positions

0 to 12 left or right0º to 20º up or down

SPECIFICATIONS NVH-210 NVH-240 NVH-270

Moldboard widthApproximate weightKing pin diameterMoldboard height & thicknessCutting edge

Maximum tractor hpHitchSwing angle

Offset adjustment

Tilt adjustment

7677

65 80

8706

9800

318 x 1/4”

1/2" x 6" high carbon-steel blade,reversible, interchangeable

3 - point category II15º, 30º and 45º, left or right,

3 forward and 3 reverse positions9 or 18 left or right

(manual or hydraulic)1

7.5º, 15º, 22.5º up or down

ftlbinin

hp

in

SPECIFICATIONSNVH

240-XHDNVH

270-XHDNVH

300-XHDMoldboard width Approximate weight king pin diameterMoldboard height & thicknessCutting edge

Maximum tractor hp HitchSwing angle Offset adjustment

Tilt adjustment

8926

91,020

101,069

319” x 5/16” 1/2" x 6" high carbon-steel

blade, reversible, interchangeable120 (2WD) & 110 (4WD)

3 - point category II and II quick hitch4Forward or reverse positions,

3, up to 45º left or right2, up to 18 left or right (manual)0 a 19º left or right (hydraulic)1

3, up to 23º up or down

ftlbinin

hp

in

NHVH212-XHD

NHVH242-XHD

NHVH272-XHD

NHVH302-XHD

71060 (manual)

1162 (hyd.)

81139 (manual)1241 (hyd.)

91240 (manual)1342 (hyd.)

101300 (manual)1402 (hyd.)

319” x 5/16”

1/2" x 6" high carbon-steel blade, reversible, interchangeable

120 (2WD) & 110 (4WD)3 - point category II and II quick hitch4

Forward or reverse positions.0º to 45º left or right (hydraulic)1,30 to 19 left or right (hydraulic)1,3

0º to 15º up or down (hydraulic)2,3

NVHL SERIES

REGULAR DUTY SERIES

SPECIFICATIONS NVHA-180 NVHA-210 NVHA-240

Moldboard widthApproximate weightAngle, tilt & offset

Moldboard height & thicknessCutting edgeMaximum tractor hpHitchMoldboard upper edgeOffset adjustmentTilt adjustment

6330

7366

8391

Manual or Hydraulically adjusted angleand manually tilt and offset15” height, 1/4“ thickness

1/2" x 6" reversible60 hp (4WD)3 Point CAT I

Full Bend6” or 12” left or right

0 to 20 degrees up or down

ftlbin

in

hp

in

NVHA SERIES

T/TL/F SERIES

EXTRA HEAVY DUTY SERIES

360 Swing Angle*Parking Stand Included