realistic paper craft yzf-r1 assembly … instructions 2007.11.12 assembly instructions: twenty...
TRANSCRIPT
Assembly Instructions
2007.11.12
Assembly instructions: Twenty A4-sized sheets.
Paper craft: Twenty-two A4-sized sheets with 312 parts in all
These instructions apply only to the "YZF-R1". These Paper Craft parts are easier to work with when printed out on strong, thick paper (like postcard stock).
Thank you for downloading the "YZF-R1"paper craft model. By simplyfollowing this manual while referring to the names and numbers shownon the parts sheets, you can assemble an authentic-looking replica of the YZF-R1.
Please glue them by aligning the red and red/blue and blueparts if they are marked on the paper.
2
Note
Basic working method and markingsTo begin
How to assemble
Tools and materials needed
Items of Caution
-Ruler - scissors - blade cutter or "Exacto-knife" - awl or
other pointed tool (for making a folding crease) - felt pen
- pin set - glue - hand towel ( for cleaning your fingers) -
dictionary or other heavy book ( to press the papers flat).
*Take care when using sharp or pointed objects or when
using bladed cutting tools. Place a heavy sheet of paper
under the paper you want to cut.
*Use glue and other adhesives only in well-ventilated
areas.
*When printing, use a slightly reduced font size. There
may be differences in dimensions, depending on the
type of printer used.
*Follow the working method and markings carefully.
*Cut carefully along the outter line with cutting blade,
Exacto-knife or scissors.
One - point Advice
*Before beginning assembly, test adhesive amounts
on extra paper.
*Cut carefully with cutting blade, Exacto-knife or
scissors.
*Occasionally, white spots will be apparent on folds
and cuts. Use a marker or pencil to fill in these spots.
It is recommended that this be done after each stage
of assembly because coloring becomes more difficult
once parts are assembled.
*As an adhesive, white wood glue is recommended.
Avoid over application as this may cause the paper to
wrinkle.
*For folding parts, first use an awl or other pointed
tool to make a light crease along the dotted or solid
line. This will make the folds straight. Avoid making
strong creases, as this will cause the paper to tear.
Cut along these lines.Dotted line
Fold along these lines. The printed surface should beon the inside of the folded shape.
Broken lines
Fold along these lines. The printed surface should beon the outside of the folded shape.
Solid lines
Do not fold or cut the partsmarked .
Red dots are the referencepositions for gluing surfaces.
Cut out parts marked with anasterisk(*).
3
Front CowlSheet A, 8 parts in total
Front FenderSheet B, 3 parts in total
Reference photo
Reference photo
Indication of Working Methods
First, assemble each component by following the working
method and markings. Then, refer to the illustration and
photos below to glue the parts together.Foldor Curve Glue
1 Assembling the Front Cowl & Front Fender
Fold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
1Glue in order from to on the graphic.4
11
2
2
3
34
4
A-3
A-4
A-5
B-1
B-2
A-7
A-8
A-2
B-3
A-1
A-6
4
Reference photo
Reference photo
Indication of Working Methods
First, assemble each component by following the working
method and markings. Then, refer to the illustration and
photos below to glue the parts together.Foldor Curve Glue
2 Assembling the Meter & Brake Caliper
Brake CaliperSheet B, 6 parts in total
MeterSheet B, 12 parts in total
Fold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
1
2
2
1
2
2
3
3
4
4
5
6
7 8
1Glue in order from to on the graphic.8
1Glue in order from to on the graphic.2
*Assemble both sides. The diagram shows the left side. The number inside the ( ) is for the right side.
B-13
B-11
B-10
B-6
B-9
B-16(19)
B-12B-7
B-8
B-5
B-18(21)
B-15
B-14
B-17(20)
B-4
5
Reference photo
Indication of Working Methods
First, assemble each component by following the working
method and markings. Then, refer to the illustration and
photos below to glue the parts together.Foldor Curve Glue
3 Assembling the Steering
SteeringSheet B, 19 parts in total
Fold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
1
1
2
2
3
3
4
4
5
5
6
1Glue in order from to on the graphic.6
[ Lower Steering Column ]
[ Upper Steering Column ]
DO NOT glue the upper and the lower parts of the steering column at this stage.
B-24
B-23
B-35
B-37
B-39B-29
B-30
B-40
B-38
B-36
B-33
B-28
B-22B-26
B-34B-27
B-31
B-25
B-32
6
Reference photo
Indication of Working Methods
First, assemble each component by following the working
method and markings. Then, refer to the illustration and
photos below to glue the parts together.Foldor Curve Glue
4 Assembling the Frame1
Frame1Sheet C, 18 parts in total
Fold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
1
2
3
4
5
6
6 6
7
7
8
8
9
9
10
10
11
12
12
1Glue in order from to on the graphic.12
C-7
C-12
C-13
C-11
C-10
C-1
C-2
C-5
C-14
C-9
C-6
C-3
C-4
C-8
C-18
C-15C-16
C-17
7
Reference photo
Reference photo
Indication of Working Methods
First, assemble each component by following the working
method and markings. Then, refer to the illustration and
photos below to glue the parts together.Foldor Curve Glue
5 Assembling the Frame2& Fuel Tank
Frame2Sheet B, 7 parts in total
Fuel TankSheet D, 2 parts in total
Fold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
C-23
C-21
C-22
C-20
D-1
D-2
C-25C-24
C-19
8
Reference photo
Indication of Working Methods
First, assemble each component by following the working
method and markings. Then, refer to the illustration and
photos below to glue the parts together.Foldor Curve Glue
6 Assembling the Under Cowl
Under CowlSheet E, 13 parts in total
Fold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
1
1
2
2
3
33
34
4
44
56
6
66
7
7
1Glue in order from to on the graphic.7
E-3
E-5
E-4
E-13
E-2
E-1
E-10
E-9
E-12
E-8 E-11
E-7
E-6
9
Reference photo
Reference photo
Indication of Working Methods
First, assemble each component by following the working
method and markings. Then, refer to the illustration and
photos below to glue the parts together.Foldor Curve Glue
7 Assembling the Seat Cowl & Taillight
Seat CowlSheet F, 13 parts in total
TaillightSheet G, 13 parts in total
Fold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
12
33
4
5
67
78
8
8
8
8
8
9
10
1
1
2
2
33
4
5
6
77
8
1Glue in order from to on the graphic.8
1Glue in order from to on the graphic.10
G-6G-8
G-2G-3
G-11
G-13
G-10
G-12
F-6
F-5
F-13
F-7
F-8
G-1
G-7
G-9
G-5
G-4
F-10
F-9
F-3
F-1,2
F-11
F-4
F-12
10�
Reference photo
Reference photo
Indication of Working Methods
First, assemble each component by following the working
method and markings. Then, refer to the illustration and
photos below to glue the parts together.Foldor Curve Glue
8 Assembling the Rear Suspension & Rear Arm
Rear SuspensionSheet C, 12 parts in total
Rear ArmSheet I, 15 parts in total
Fold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
1Glue in order from to on the graphic.
1
2
33
4
44
5
6
1
23
3
4
5
6
78
9
10
10
11 12
13
13
1Glue in order from to on the graphic.
6
13
* Do not paste H-10 & H-11.
I-4
H-6
H-4
H-2
H-5
I-5
I-1
I-14
I-15 I-9
I-8
I-11
H-11
H-7
H-1
I-6
I-12,13
H-9
H-8
I-2
I-3
I-10
I-7
H-3
H-10
11�
Reference photo
Indication of Working Methods
First, assemble each component by following the working
method and markings. Then, refer to the illustration and
photos below to glue the parts together.Foldor Curve Glue
9 Assembling the Engine
EngineSheet J, 34 parts in total
1
2
3
4
5
6
6
7
78
8
9
9
10
11
12
13
14
1516
17
18
19
20
23
21 22
1Glue in order from to on the graphic.23
J-4
J-3
J-29
J-30J-32
J-17
J-31
J-10J-8
J-7
J-9
J-20,21,22,23,24,25
J-19
J-16
J-14
J-18
J-34
J-15J-13
J-12
J-11
J-2
J-1
J-33
J-6
J-26,27J-28
J-5
12�
Reference photo
Reference photo
Indication of Working Methods
First, assemble each component by following the working
method and markings. Then, refer to the illustration and
photos below to glue the parts together.Foldor Curve Glue
10 Assembling the Radiator & Stand
StandSheet K, 10 parts in total
RadiatorSheet J, 18 parts in total
Fold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
1
1
2
2
3
3
4
4
5
5
1Glue in order from to on the graphic.5
* Do not paste J-48 & J-49.
* Do not paste K-2 & K-8.
* Do not paste K-1 & K-7.
J-47
J-39J-40
J-43
J-46
J-45
J-44
J-42
J-41
J-51
J-52
J-49
J-48
J-50J-35
J-36
J-37
J-38
K-8K-2
K-7
K-1
K-9
K-10 K-3
K-4
K-5
K-6
14�
Reference photo
Reference photo
Indication of Working Methods
First, assemble each component by following the working
method and markings. Then, refer to the illustration and
photos below to glue the parts together.Foldor Curve Glue
12 Assembling the Left footrests & Right footrests
Left footrestsSheet M, 6 parts in total
Right footrestsSheet M, 11 parts in total
Fold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
2
3
4
5 6
7
8
910
1Glue in order from to on the graphic.6
1Glue in order from to on the graphic.10
1
M-9
M-5
M-3
M-14
M-10
M-12
M-13
M-17
M-11
M-16
M-15
M-4
M-2
M-1
M-6
M-7
M-8
15�
Reference photo
Indication of Working Methods
First, assemble each component by following the working
method and markings. Then, refer to the illustration and
photos below to glue the parts together.Foldor Curve Glue
13 Assembling the Front Tire
Front TireSheet N, 17 parts in total
Fold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
1
1
2
2
3
3
4
5
5
1Glue in order from to on the graphic.5
N-7
N-17
N-13
N-11
N-9
N-15
N-16
N-10
N-12
N-14
N-1
N-4N-5
N-6
N-8
N-2
N-3
16�
Reference photo
Indication of Working Methods
First, assemble each component by following the working
method and markings. Then, refer to the illustration and
photos below to glue the parts together.Foldor Curve Glue
14 Assembling the Rear Tire
Rear TireSheet O, 17 parts in total
Fold each relevant part according to the assembly symbols.
Please use the dots on each component as reference when gluing surfaces.
1
1
4
5
5
2
2
3
3
1Glue in order from to on the graphic.5
O-6
O-4
O-17O-13
O-11
O-10
O-16
O-15
O-14
O-2
O-8
O-5 O-7
O-3O-1
O-9
O-12
Glue the radiator to the engine.
Glue the engine to the frame 1.
Glue the rear arm to the frame 1.
Glue the rear suspension 1 to the frame 1.
Glue the rear suspension 2 to the frame 1.
Glue the taillight to the seat cowl.
Glue the exhaust pipes 3 to the seat cowl.
Glue the seat cowl to the frame 2.
Glue the tank to the frame 2.
Glue the frame 2 to the frame 1.
Glue the exhaust pipes 1 to the engine.
Glue the meter to the frame 1.
Glue the under cowl to the frame 1.
Glue the front cowl to the under cowl.
Glue the brake caliper to the front tire.
Glue the front tire to the lower steering column.
Glue the front fender to the lower steering column.
Glue the rear tire to the rear arm.
Glue the left footrests to the frame 1.
Glue the right footrests to the frame 1.
Insert exhaust pipes 2 into exhaust pipes 1 and 3.
Put the lower part of the steering through the frame and glue it to the upper part of the steering.
�
2
3
4
5
6
7
8
9
10
11
13
1
12
14
15
16
17
18
22
19
20
21
22
15 Finish
17�
Please use the dots on each component as reference when gluing surfaces.
Connect each of the previously assembled parts in order from - according to the diagram.1
1
1
2
23
4
5 5
6
7
8
9
10
10
11
11
12
12
13
14
15
16
16
17
17
18
21
22
Front Cowl
Front Fender
Brake Caliper
Meter
Frame 1
Frame 2
Fuel Tank
Leftfootrests
Under Cowl
Seat Cowl Taillight
Rear Tire
Front Tire
Rightfootrests
ExhaustPipes1
Exhaust Pipes2
Exhaust Pipes3
Radiator
Engine
Rear Suspension2
Rear Suspension1
Rear Arm
Upper Steering Column
Lower Steering Column
19
20
�
RIGHT FRONT
18
16 Assembled Model and the List of Parts
Please refer to the photo below when attaching each component.
Under CowlSheet E, 13 parts in total
Fuel TankSheet D, 2 parts in total
SteeringSheet B, 19 parts in total
Front CowlSheet A, 8 parts in total
Exhaust PipesSheet L, 60 parts in total
Right footrestsSheet M, 11 parts in total
Seat CowlSheet F, 13 parts in total
19
�
LEFT REAR
16 Assembled Model and the List of Parts
Please refer to the photo below when attaching each component.
Front FenderSheet B, 3 parts in total
Rear SuspensionSheet H, 11 parts in total
EngineSheet J, 34 parts in total
Front TireSheet N, 17 parts in total
Rear TireSheet O, 17 parts in total
TaillightSheet G, 13 parts in total
Left footrestsSheet M, 6 parts in total
�
FRONT BACK
20
16 Assembled Model and the List of Parts
Please refer to the photo below when attaching each component.
Rear ArmSheet I, 15 parts in total
Frame 2Sheet c, 7 parts in total
Frame 1Sheet c, 18 parts in total
Brake CaliperSheet B, 6 parts in total
MeterSheet B, 12 parts in total
RadiatorSheet J, 18 parts in total