free knitting pattern lion brand® lb collection® pure wool ......loop – 1 st increased. lion...

©2019 Lion Brand Yarn Company, all rights reserved.

Free Knitting Pattern

Lion Brand® LB Collection® Pure Wool

LB Collection® Wool LB Collection® Baby Alpaca

LB Collection® Merino Yak Alpaca LB Collection® Jumbo Alpaca Blend

Freeform Texture Pullover

Pattern Number: L80370 Designed by Vladimir Teriokhin

Lion Brand® LB Collection® Pure Wool - LB Collection® Wool - LB Collection® Baby Alpaca LB Collection® Merino Yak Alpaca - LB Collection® Jumbo Alpaca Blend

Freeform Texture Pullover Pattern Number: L80370

For thousands of free patterns, visit our website www.LionBrand.com To order visit our website www.lionbrand.com or call: (800) 258-YARN (9276) any time!

Copyright ©1998-2019 Lion Brand Yarn Company, all rights reserved. No pattern or other material may be reproduced -- mechanically, electronically, or by any other means, including

photocopying - without written permission of Lion Brand Yarn Company.

SKILL LEVEL – Intermediate SIZES S (M/L, 1X/2X) Finished Bust About 46 (54, 63) in. (117 (137, 160) cm) Finished Length About 22 (23, 24) in. (56 (58.5, 61) cm) Note: Pattern is written for smallest size with changes for larger sizes in parentheses. When only one number is given, it applies to all sizes. To follow pattern more easily, circle all numbers pertaining to your size before beginning. MATERIALS

Lion Brand® LB Collection® Pure Wool (Art. #489) 098 Natural 5 (7, 8) hanks (A)

Lion Brand® LB Collection® Wool (Art. #493) 098 Natural 1 hank (B)

Lion Brand® LB Collection® Baby Alpaca (Art. #488) 098 Natural 1 ball (C)

Lion Brand® LB Collection® Merino Yak Alpaca (Art. #498) 123 Oatmeal 1 ball (D)

Lion Brand® LB Collection® Jumbo Alpaca Blend (Art. #473) 100 White 1 hank (E)

Lion Brand® stitch markers

Lion Brand® large-eyed blunt needle

ADDITIONAL MATERIALS Circular knitting needle size 8 (5 mm), 16 in. (40.5 cm) long Circular knitting needle size 8 (5 mm), 29 in. (73.5 cm) long GAUGE 18 sts = about 4 in. (10 cm); 16 rows = about 3 1/2 in. (9 cm) in Moss st. BE SURE TO CHECK YOUR GAUGE. STITCH EXPLANATIONS 1/2 LC (1 over 2 left cross) Slip 1 st to cable needle and hold in front, k2, then k1 from cable needle. 1/2 RC (1 over 2 right cross) Slip 2 sts to cable needle and hold in back, k1, then k2 from cable needle. kfb (knit in front and back) Knit next st without removing it from left needle, then k through back of same st – 1 st increased. M1 (make 1) An increase worked by lifting the horizontal strand lying between needles and placing it onto the left needle. Knit this new stitch through the back loop – 1 st increased.






s2kp (slip 2, knit 1, pass slipped sts over) Slip next 2 sts as if to knit them together, knit 1, pass the 2 slipped sts up and over the knit st and off the needle – 2 sts decreased. ssk (slip, slip, knit) Slip next 2 sts as if to knit, one at a time, to right needle; insert left needle into fronts of these 2 sts and knit them together – 1 st decreased. yo (yarn over) An increase that also creates a small decorative hole (eyelet) in the fabric, worked as follows: 1. Bring yarn to front, between the needles. 2. Take yarn to back, over the right needle. This creates the new st. You are now ready to proceed with the next st as instructed. PATTERN STITCHES Lattice Stitch (worked over 4 sts) Row 1 (RS): Ssk, (yo) twice, k2tog. Row 2: P1, (p1, k1) into double yo, p1. Rep Rows 1 and 2 for Lattice st pattern. Mesh Stitch (worked over multiple of 3 sts + 4 additional sts) Row 1 (RS): Ssk, *(yo) twice, s2kp; rep from * to last 2 sts, (yo) twice, k2tog. Row 2: P1, (p1, k1) into double yo, *p1, (p1, k1) into double yo; rep from * to last st, p1. Rep Rows 1 and 2 for Mesh st pattern. Moss Stitch (worked over an even number of sts) Row 1 (RS): *K1, p1; rep from * to end. Row 2: Rep Row 1. Rows 3 and 4: *P1, k1; rep from *. Rep Rows 1-4 for Moss st pattern. Honeycomb Panel (worked over a multiple of 6 sts) Row 1 (RS): Knit. Row 2: Purl. Row 3: *1/2 LC, 1/2 RC; rep from * to end. Rows 4-6: Work in St st (k on RS, p on WS) for 3 rows. Row 7: *1/2 RC, 1/2 LC; rep from * to end. Row 8: Purl. Rep Rows 1-8 for Honeycomb Panel pattern.






NOTES 1. Pullover is worked in 4 pieces: Back, Front and 2 Sleeves. 2. A circular needle is used to accommodate the number of sts. Work back

and forth in rows on the circular needle as if working on straight needles. 3. Pattern sts can be worked by following the written instructions or by reading

the charts. Read RS rows of charts from right to left and WS rows from left to right.

4. When you see ‘work even’ in the instructions, this means to continue on in the pattern st you have established without changing the st count by increasing, decreasing, or binding off.

5. When you see 'work in patterns as established' in the instructions, this means to work the next row of the pattern st, lining up sts as in previous rows.

BACK With longer circular needle and A, cast on 76 (92, 112) sts. Set-Up Row (RS): P1 (selvedge st), (k2, p2) 2 (2, 3) times for K2, p2 Rib, place marker (pm), k4, pm, (p2, k2) 1 (3, 3) time(s), p2 for K2, p2 Rib, pm, k4, pm, (p2, k2) 7 (7, 10) times, p2 for K2, p2 Rib, pm, k4, pm, (p2, k2) 1 (3, 3) time(s), p2 for K2, p2 Rib, pm, k4, pm, (p2, k2) 2 (2, 3) times for K2, p2 Rib, p1 (selvedge st). Row 1: K1 (selvedge st), *k the knit sts and p the purl sts to marker, slip marker, (sm), work Row 2 of Lattice st pattern over next 4 sts, sm; rep from * 3 more times, k the knit sts and p the purl sts to last st, k1 (selvedge st). Keeping first and last st in Rev St st (p on RS, k on WS), work in K2, p2 Rib and Lattice patterns as established until piece measures about 3 in. (7.5 cm) from beg, end with a WS row as the last row you work. Increase Row (RS): P1, M1, *work Row 1 of Moss st pattern to next marker, sm, work Row 1 of Lattice st pattern to next marker, sm; rep from * once more, k4, (M1, k2 (2, 3)) 12 times, k2 for Row 1 of Honeycomb Panel pattern, sm, work Row 1 of Lattice st pattern to next marker, sm, work Row 1 of Moss st pattern to next marker, sm, work Row 1 of Lattice st pattern to next marker, sm, work Row 1 of Moss st pattern to last st, M1, p1 – you will have 90 (106, 126) sts in this row.

Note: When you see '0' in an instruction, this means that for that size, you should not work any sts, just skip to the next part of the instruction.

Shape Sides Next 5 Rows: Work even in patterns as established for 5 rows. Next Row (Increase Row – RS): P1, M1, work in patterns as established to last st, M1, p1 – 92 (108, 128) sts.






Rep last 6 rows 10 (11, 12) more times, working new sts into Moss st pattern – 112 (130, 152) sts when all increases have been completed. Work even in patterns as established until piece measures about 18 (19, 20) in. (45.5 (48.5, 51) cm) from beg, end with a WS row as the last row you work. Shape Shoulders Rows 1-10: Bind off 3 (4, 5) sts, work in patterns as established to end of row – 82 (90, 102) sts in Row 10. Shape Neck and Continue to Shape Shoulders Place a marker on each side of center 18 (20, 22) sts for back neck. Row 1 (RS): Bind off 4 (5, 6) sts, work in patterns as established to first neck marker for right side of neck, join a 2nd ball of yarn and bind off center 18 (20, 22) sts and remove neck markers, work in patterns as established to end of row for left side of neck – 28 (30, 34) sts on right side and 32 (35, 40) sts on left side.

You will now work both sides of neck AT THE SAME TIME using separate balls of yarn.

Row 2: On left side, bind off 4 (5, 6) sts, work in patterns as established to end of side; on right side, bind off 2 sts, work in patterns as established to end – 26 (28, 32) sts on right side and 28 (30, 34) sts on left side. Row 3: On right side, bind off 4 (5, 6) sts, work in patterns as established to end of side; on left side, bind off 2 sts, work in patterns as established to end – 22 (23, 26) sts on right side and 26 (28, 32) sts on left side. Row 4: Rep Row 2 – 20 (21, 24) sts on right side and 22 (23, 26) sts on left side. Row 5: On right side, bind off 4 (5, 6) sts, work in patterns as established to end of side; on left side, bind off 2 sts, work in patterns as established to end – 16 (16, 18) sts on right side and 20 (21, 24) sts on left side. Row 6: On left side, bind off 4 (5, 6) sts, work in patterns as established to last 3 sts of side, p2tog through back loop, p1; on right side, p1, p2tog, work in patterns as established to end – 15 (15, 17) sts on each side. Row 7: On right side, bind off 6 (6, 7) sts, work in patterns as established to last 3 sts of side, k2tog, k1; on left side, k1, ssk, work in patterns as established to end – 8 (8, 9) sts on right side and 14 (14, 16) sts on left side. Row 8: On left side, bind off 6 (6, 7) sts, work in patterns as established to last 3 sts of side, p2tog through back loop, p1; on right side, p1, p2tog, work in pattern as established to end – 7 (7, 8) sts on each side. Row 9: On right side, bind off 2 (2, 3), bind off rem sts working k2tog over next 2 sts and fasten off last st; on left side, k1, ssk, work in patterns as established to end – 6 (6, 7) sts on left side only. Bind off rem left side sts.






FRONT With longer circular needle and A, cast on 76 (92, 112) sts. Set-Up Row (RS): P1 (selvedge st), (k2, p2) 2 (2, 3) times for K2, p2 Rib, place marker (pm), k4, pm, (p2, k2) 1 (3, 3) time(s), p2 for K2, p2 Rib, pm, k4, pm, (p2, k2) 7 (7, 10) times, p2 for K2, p2 Rib, pm, k4, pm, (p2, k2) 1 (3, 3) time(s), p2 for K2, p2 Rib, pm, k4, pm, (p2, k2) 2 (2, 3) times for K2, p2 Rib, p1 (selvedge st). Row 1: K1 (selvedge st), *k the knit sts and p the purl sts to marker, slip marker, (sm), work Row 2 of Lattice st pattern over next 4 sts, sm; rep from * 3 more times, k the knit sts and p the purl sts to last st, k1 (selvedge st). Keeping first and last st in Rev St st (p on RS, k on WS), work in K2, p2 Rib and Lattice patterns as established until piece measures about 3 in. (7.5 cm) from beg, end with a WS row as the last row you work. Increase Row (RS): P1, *work Row 1 of Moss st pattern to next marker, sm, work Row 1 of Lattice st pattern to next marker, sm; rep from * once more, k4 (4, 3), (M1, k2 (2, 3)) 13 times for Row 1 of Mesh st pattern, sm, work Row 1 of Lattice st pattern to next marker, sm, work Row 1 of Moss st pattern to next marker, sm, work Row 1 of Lattice st pattern to next marker, sm, work Row 1 of Moss st pattern to last st, p1 – 89 (105, 125) sts. Shape Sides Next 5 Rows: Work even in patterns as established for 5 rows. Next Row (Increase Row – RS): P1, M1, work in patterns as established to last st, M1, p1 – 91 (107, 127) sts. Rep last 6 rows 10 (11, 12) more times, working new sts into Moss st pattern – 111 (129, 151) sts when all increases have been completed. Work even in patterns as established until piece measures about 18 (19, 20) in. (45.5 (48.5, 51) cm) from beg, end with a WS row as the last row you work. Shape Shoulders Rows 1 and 2: Bind off 3 (4, 5) sts, work in patterns as established to end of row – 105 (121, 141) sts in Row 2. Rows 3 and 4: Bind off 3 (4, 5) sts, *work in Moss st pattern as established to next marker, sm, work in Lattice st pattern as established to next marker, sm; rep from * once more, work in St st (k on RS, p on WS) to next marker, sm, work in Lattice st pattern as established to next marker, sm, work in Moss st pattern as established to next marker, sm, work in Lattice st pattern to next marker, sm, work in Moss st pattern as established to end of row – 99 (113, 131) sts. Shape Neck and Continue to Shape Shoulders Place a marker on each side of center 5 (7, 9) sts for front neck.






Row 1 (RS): Bind off 3 (4, 5) sts, work in patterns as established to first neck marker for left side of neck, join a 2nd ball of yarn and bind off center 5 (7, 9) sts and remove neck markers, work in patterns as established to end of row for right side of neck – 44 (49, 56) sts on left side and 47 (53, 61) sts on right side.

You will now work both sides of neck AT THE SAME TIME using separate balls of yarn.

Row 2: On right side, bind off 3 (4, 5) sts, work in patterns as established to end of side; on left side, bind off 3 sts, work in patterns as established to end – 41 (46, 53) sts on left side and 44 (49, 56) sts on right side. Row 3: On left side, bind off 3 (4, 5) sts, work in patterns as established to end of side; on right side, bind off 3 sts, work in patterns as established to end – 38 (42, 48) sts on left side and 41 (46, 53) sts on right side. Rows 4 and 5: Rep Rows 2 and 3 – 32 (35, 40) sts on left side and 35 (39, 45) sts on right side. Row 6: On right side, bind off 3 (4, 5) sts, work in patterns as established to end of side; on left side, bind off 2 sts, work in patterns as established to end – 30 (33, 38) sts on left side and 32 (35, 40) sts on right side. Row 7: On left side, bind off 4 (5, 6) sts, work in patterns as established to end of side; on right side, bind off 2 sts, work in patterns as established to end – 26 (28, 32) sts on left side and 30 (33, 38) sts on right side. Row 8: On right side, bind off 4 (5, 6) sts, work in patterns as established to end of side; on left side, bind off 2 sts, work in patterns as established to end – 24 (26, 30) sts on left side and 26 (28, 32) sts on right side. Row 9: Rep Row 7 – 20 (21, 24) sts on left side and 24 (26, 30) sts on right side. Row 10: On right side, bind off 4 (5, 6) sts, work in patterns as established to last 3 sts of side, p2tog through back loop, p1; on left side, p1, p2tog, work in patterns as established to end – 19 (20, 23) sts on each side. Row 11: On left side, bind off 4 (5, 6) sts, work in patterns as established to last 3 sts of side, k2tog, k1; on right side, k1, ssk, work in patterns as established to end – 14 (14, 16) sts on left side and 18 (19, 22) sts on right side. Row 12: Rep Row 10 – 13 (13, 15) sts on each side. Row 13: On left side, bind off 6 (6, 7) sts, work in patterns as established to last 3 sts of side, k2tog, k1; on right side, k1, ssk, work in patterns as established to end – 6 (6, 7) sts on left side and 12 (12, 14) sts on right side. Row 14: On right side, bind off 6 (6, 7) sts, work in patterns as established to end of side; on left side, work in pattern as established to end – 6 (6, 7) sts on each side. Row 15: On left side, bind off rem 6 (6, 7) sts; on right side, work in patterns as established to end – 6 (6, 7) sts on right side only. Bind off rem right side sts. SLEEVES (make 2) With longer circular needle and A, cast on 32 (32, 40) sts. Set-Up Row (RS): P1 (selvedge st), (k2, p2) 2 (2, 3) times for K2, p2 Rib, pm, k4, pm, p2, k2, p2 for K2, p2 Rib, pm, k4, pm, (p2, k2) 2 (2, 3) times for K2, p2 Rib, p1 (selvedge st).






Row 1: K1 (selvedge st), *k the knit sts and p the purl sts to marker, sm, work Row 2 of Lattice st pattern over next 4 sts, sm; rep from * once more, k the knit sts and p the purl sts to last st, k1 (selvedge st). Keeping first and last st in Rev St st, work in K2, p2 Rib and Lattice patterns as established until piece measures about 3 in. (7.5 cm) from beg, end with a WS row as the last row you work. Increase Row (RS): P1, M1, [kfb] 8 (8, 12) times, M1, sm, work Lattice st pattern as established to next marker, sm, work Row 1 of Moss st pattern to next marker, sm, work Lattice st pattern as established to next marker, sm, M1, [kfb] 8 (8, 12) times, M1, p1 – 52 (52, 68) sts. Next Row (WS): K1, *work Row 2 of Moss st pattern to marker, sm, work Lattice st pattern as established to next marker, sm; rep from * once more, work Row 2 of Moss st pattern to last st, k1. Shape Sides Next 0 (4, 4) Rows: Work even in patterns as established. Next Row (Increase Row – RS): P1, M1, work in patterns as established to last st, M1, p1 – 54 (54, 70) sts. Next 3 (1, 3) Rows: Work even in patterns as established. Next Row (Increase Row – RS): P1, M1, work in patterns as established to last st, M1, p1 – 56 (56, 72) sts. Rep last 4 (2, 4) rows 8 (11, 7) more times – 72 (78, 86) sts. Work even in patterns as established until piece measures about 11 in. (28 cm) from beg, end with a WS row as the last row you work. Shape Cap (top of Sleeve) Rows 1-8: Bind off 6 (6, 7) sts, work in patterns as established to end of row – 24 (30, 30) sts in Row 8. Row 9: Bind off 6 (6, 7) sts, k to end of row – 18 (24, 23) sts. Row 10: Bind off 6 (6, 7) sts, p to end of row – 12 (18, 16) sts. Bind off. FINISHING Sew shoulder seams. Neckband From RS with shorter circular needle and A, beg at one shoulder seam, pick up and k72 (76, 80) sts evenly spaced around neck edge. Place marker for beg of rnd. Join by working the first st on the left hand needle with the working yarn from the right hand needle. Rnds 1-28: *K2, p2; rep from * around. Bind off.






Fold neckband to WS and sew bound-off edge to pick-up row. Place markers on side edges of Front and Back about 8 (9, 10) in. (20.5 (23, 25.5) cm) from shoulder seams. Sew tops of Sleeves between markers. Sew side and Sleeve seams. Weave in ends. Front Panel Embellishment Cut lengths of yarns B, C, D, and E. Weave lengths or combinations of lengths through sts of Front Mesh St panel as desired. Fringe Add fringe wherever you like, using any yarn(s) or number of strands. For each fringe, we cut strands about 6 in. (15 cm) long. Hold the strand(s) together and fold in half. Draw fold through edge of piece, forming a loop. Pull ends of fringe through this loop and tighten. Trim fringe ends evenly. ABBREVIATIONS beg = begin(ning) k = knit k2tog = knit 2 stitches together p = purl p2tog = purl 2 stitches together rem = remain(ing) rep = repeat Rev St st = Reverse Stockinette stitch rnd(s) = round(s) RS = right side st(s) = stitch(es) St st = Stockinette stitch WS = wrong side Every effort has been made to produce accurate and complete instructions. We cannot be responsible for variance of individual crafters, human error, or typographical mistakes.

free knitting pattern lion brand® lb collection® pure wool ......loop – 1 st increased. lion...

Documents