containment bunds • spill control • emergency wash ... · accumulation centre for containment...

29
• Containment bunds • Spill Control • Emergency wash stations • Safety cabinets • Relocatable dangerous goods stores STORAGE & CONTAINMENT

Upload: others

Post on 06-Aug-2020

3 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Containment bunds • Spill Control • Emergency wash ... · Accumulation Centre for containment storage of small containers up to 20 litre drums Satellite Collection Site for Recyclables

• Containment bunds

• Spill Control

• Emergency wash stations

• Safety cabinets

• Relocatable dangerous goods stores

STORAGE & CONTAINMENT

Page 2: Containment bunds • Spill Control • Emergency wash ... · Accumulation Centre for containment storage of small containers up to 20 litre drums Satellite Collection Site for Recyclables

205

Customer Service 1300 305 314 • www.backsafe-australia.com.au

SP

ILL, Sto

Ra

gE &

Co

nta

Inm

Ent

BABB1T

Bulk Container Storage SystemAll bulk containers (1000L containers) must be bunded to comply with regulations which means the bund must contain at least 1000 litres. These units offer a cost effective and space saving solution, without compromising quality. Available in both single and double units (don’t forget the spare 1000L container must be bunded) and with a couple of unique accessories.

PVC weather covers are an option which is essential in outdoor locations to eliminate storm water filling the bund – as this will render the bund non-compliant. PVC covers include a galvanised frame and zipper door. Dispensing trays are available for both the single and double version to provide spill contaminant when decanting – these units will even spill back into the main bund should the container valve be left open.

PVC Bund CoversBacksafe Australia has now launched a solution to outdoor container storage which the market has been searching for – a robust and simple to assemble weather cover for drum and IBC bunds. These units include a knock down galvanized steel frame (Stainless also available) which supports a heavy duty PVC cover with zipper door to the front for quick access.

No more checking bunds for accumulated stormwater, and no chance of contaminated stormwater leaving the bund. Packs flat for transport. Cover the containers and cover yourself; add a bund cover.

Part No. Description Capacity

BABB1 Polyethylene 1 x 1000L bund 1100L

BABB2 Polyethylene 2 x 1000L bund 1140L

BABB1T Dispensing tray for BABB1 86L

BABB2T Dispensing tray for BABB2 86L

Part No. Description

BABP4LC PVC cover and Galv frame for 4 drum bund BABP4L

BABP2C PVC cover and Galv frame for 2 drum bund BABP2

BABB1C PVC cover and Galv frame for 1 x 1000L bund BABB1

BABB2C PVC cover and Galv frame for 2 x 1000L bund BABB2

BABB1

PVC Bund Covers

BABB2

BABP4LC

BABB2C BABB1C

Page 3: Containment bunds • Spill Control • Emergency wash ... · Accumulation Centre for containment storage of small containers up to 20 litre drums Satellite Collection Site for Recyclables

206

SP

ILL,

Sto

Ra

gE

& C

on

taIn

mEn

t

Customer Service 1300 305 314 • www.backsafe-australia.com.au

BABP4LBABP2

BABT230

Bunded Drum Storage SystemAll liquids stored on site need to be safely bunded, (as required by law) and in a unit which will contain at least the largest stored container should it spill. This is now a simple matter with Backsafe Australia’s poly drum bunds. Available in both 2 drum and 4 drum sizes, featuring removable grating and provision for fork tynes, and made from heavy duty polyethylene for durability.

EPA bund requirements are 110% of the largest drum stored or 25% of the total volume store in drums whichever is greater.

Spill Containment CaddyNo longer are 205L drums awkward and heavy, and a recipe for spills and injuries. With the spill containment caddy these can be moved and decanted in safety, anywhere at anytime. This unit features a unique design which makes use of the lever principle to rotate a standing drum to the horizontal position, where a swivel wheel allows the whole unit to travel along the floor. The caddy doubles as a bund, with a 230 litre capacity to contain at least one whole container, should it spill or leak.

Drum Racking BundThere is a simpler and safer approach to storing liquids in racking – poly racking bund. These units are designed to suit standard racking while preserving space, and contain the legal minimum when storing 205L containers – at least one whole container. Ideal for warehousing of containers from 5L up to 205L, such as oil, coolant, chemicals and more.

Low Profile Bund SystemWhen manual handling and environmental concerns are equally important, the solution is low profile poly bunding. Available in 2 drum and 4 drum and 4 drum in-line versions, these units measure only 150mm high but comply with bunding requirements when used correctly.

These units can be connected with a simple bund to bund connector, which will increase the bund capacity.

Also available is an optional ramp which makes drum loading a breeze and removable grating means easy cleaning.

Part No. Description Capacity

BABP2 Polyethylene 2 drum bund 240L

BABP4L Polyethylene 4 drum bund 230L

BABP2PVC PVC cover inc. Cealv. Frame for BABP2 -

BABP4LCPVC PVC cover inc. Cealv. Frame for BABP4L -

Part No. Description Capacity

BABF2 Low profile polyethylene 2 drum bund 150L

BABF4 Low profile polyethylene 4 drum bund 300L

BABF4S Low profile polyethylene 4 drum bund inline bund 300L

BABFR Polyethylene ramp for low profile bunds -

BABFC Connector kit for low profile bunds -

Part No. Description Capacity

BABT230 Poly Spill contaminant caddy 230L

Part No. Description Capacity

BARB1 Poly racking bund 220L(Racking for illustration purposes only)

Page 4: Containment bunds • Spill Control • Emergency wash ... · Accumulation Centre for containment storage of small containers up to 20 litre drums Satellite Collection Site for Recyclables

207

Customer Service 1300 305 314 • www.backsafe-australia.com.au

SP

ILL, Sto

Ra

gE &

Co

nta

Inm

Ent

BACP2

BAPDDH

BABT100

Drum TrolleysLife around the workshop can now be safer and easier with these drum handling trolleys. Designed and built to move containers up to 205L around while containing small leaks and spills, these units are available as a single drum trolley with optional handle or a general use trolley also with handle.

Spill FunnelsSpill funnels eliminate the mess and spills associated with pouring into containers. These well designed units feature an integral debris strainer and a hinged lid for weather protection. Ideal for areas where waste liquids are regularly poured into drums.

Hardcover Drum BundThe ultimate outdoor drum storage unit, the hardcover drum bund stores 2 drums in a lockable and weatherproof polyethylene bund. Simple to access and built with stays to hold lid open, this unit is a must for outdoor decanting stations etc, and fully complies with bunding regulations.

BADBC & BADBY

Drum Dispensing SystemThis unit can stack and decant up to 4 drums at one time, with the added assurance that a large spill can be contained. The two part drum rack and stack unit is very popular when 2 or more different drums are in consistent use. These units are forkable to make handling simple and made from durable polyethylene. Order units separately as below.

Part No. Description Capacity

BADBY Drum rack and stack poly base unit 400L

BADBC Drum rack and stack poly cradle unit -

Part No. Description Capacity

BACP2 Hardcover lockable poly bund with lid 400L

Part No. Description Capacity

BABT100 Poly bunded trolley for 4 x 25 cans 100L

BAPDD Drum dolly for 1 x 205L -

BAPDDH Drum dolly for 1 x 205L with handle -

Part No. Description Capacity

BADF200 1000L funnel-lid with debris strainer -

BADF50 205L funnel-lid with debris strainer -

Page 5: Containment bunds • Spill Control • Emergency wash ... · Accumulation Centre for containment storage of small containers up to 20 litre drums Satellite Collection Site for Recyclables

208

SP

ILL,

Sto

Ra

gE

& C

on

taIn

mEn

t

Customer Service 1300 305 314 • www.backsafe-australia.com.au

Model Drums Width Depth Height Capacity

SL4/C 4 1310mm 1240mm 1370mm 245 litres

Bunded ShelvingThis single depth and double depth bunded shelving system by Backsafe Australia offers a compact and neat storage solution for a thousand situations. Bunded Shelving has the distinct advantage over simply stacking in a bund that any container can be seen and accessed, while keeping everything bunded.

The unique perforated shelving ensures that leaking product does not ‘pond’, causing corrosion and other problems.

Comes flat packed – installs in minutes.

Part No. Description

BAQ4954TS Single depth bunded shelving 1300 x 750 x 1900H

BAQ4958TS Double depth bunded shelving 1300 x 1200 x 1900H

Model No. of IBCs Width Depth Height Weight Capacity

SL-IBC 1 1360mm 1510mm 600mm 165 kg 1100 litres

RS-IBC 1 1360mm 1510mm 920mm 190 kg 1100 litres

I.B.C. Containment UnitManufactured from long life galvanised steel to suit 1000 litre intermediate bulk containers. The Type RS-IBC shown is configured to allow decanting into 20 litre containers.

Fully Enclosed Containment Unit

Model Drums Width Depth Height Capacity

SL4/CDL 4 1340mm 1250mm 1380mm 245 litres

Semi enclosed containment unit Model SL4/CModel SL4/CDL

Model SL- IBC

Model RS-IBC

Semi Enclosed Containment Unit

Page 6: Containment bunds • Spill Control • Emergency wash ... · Accumulation Centre for containment storage of small containers up to 20 litre drums Satellite Collection Site for Recyclables

209

Customer Service 1300 305 314 • www.backsafe-australia.com.au

SP

ILL, Sto

Ra

gE &

Co

nta

Inm

Ent

Spill Containment CaddyA single solution for drum handling safety, mobile dispensing capability, and in-built containment.

Features:

n Big 250 litre sump capacity with exclusive, new ‘open view’ makes spill detection and clean-up easy!

n New double-duty style accepts 205 litre drums; double loop straps hold drum securely in place.

n Polyethylene construction provides exceptional durability and chemical resistance. One piece body eliminates leaks.

n Transport 273kg loads safely, minimising back injuries. Back kickplate makes drum tipping easy, and big rounded handles accommodate heavy work gloves for comfortable handling.

Model Description Outside Dimensions(mm)

Sump Capacity

Capacity

Width x Depth x Height

28908 Spill Containment Caddy 810 x 1840 x 690 250 litre 273kg

Model 28908 – Spill Containment Caddy

Drum Management SystemModular system combines efficient drum storage, positive spill control and safe liquid dispensing.

n New double-duty design permits combination storage of 205 litre drums

n Base module with moulded-in ribs supports loads up to a total of 1365kg

Model 28902 – Drum Management Base Module

Model 28902 with 28903 stack module shown with optional dispensing shelf

Model Description Outside Dimensions (mm) Sump Capacity Capacity

Width x Depth x Height

28902 Drum Management System Base Module 1250 x 1500 x 660 250 litre 1364kg total

28903 Drum Management System Stack Module 1250 x 1170 x 310 N/A 680kg

28904 Dispensing Shelf 500 x 480 x 420 N/A 27kg

Page 7: Containment bunds • Spill Control • Emergency wash ... · Accumulation Centre for containment storage of small containers up to 20 litre drums Satellite Collection Site for Recyclables

210

SP

ILL,

Sto

Ra

gE

& C

on

taIn

mEn

t

Customer Service 1300 305 314 • www.backsafe-australia.com.au

Low profile accumulation centres are an ideal solution to spill concerns during drum filling and dispensing operations. The 8 drum unit (28905) has a sump capacity that allows it to be used as a containment bund for storage of 205 litre drums, while the smaller units are ideal for storage of 20-60 litre containers.

Accumulation/Work Centres

Model Description Width x Depth x Height Sump Capacity

28905 Hazmat Accumulation Centre – 8 Drum 2460mm x 1250mm x 140mm 320 litre

28906 Accumulation Centre Ramp 1220mm x 840mm x 160mm N/A

28924 Accumulation Centre – 6 Drum 1850mm x 1250mm x 140mm 240 litre

28923 Accumulation Centre – 4 Drum 1250mm x 1250mm x 140mm 162 litre

28922 Accumulation Centre – 2 Drum 1250mm x 640mm x 140mm 83 litre

28905 Accumulation Centre with 28906 ramp

Large Quantity Storage & Organisation

Liquid Dispensing Station

28922 Accumulation Centre for containment storage of small

containers up to 20 litre drums

Satellite Collection Site for Recyclables

Spill Control PalletsThese spill control pallets are moulded from UV protected polyethylene making them nearly impervious to chemical attack from hazardous acids, caustics and solvents.

Model Description Width x Depth x Height Capacity Sump Capacity

28234 2-Drum In-Line Pallet 1250mm x 640mm x 390mm 1134kg 250 litre

28703 3-Drum In-Line Pallet 1850mm x 640mm x 290mm 1701kg 250 litre

28704 4-Drum In-Line Pallet 2460mm x 640mm x 230mm 2268kg 250 litre

28254 4-Drum Square Pallet 1250mm x 1250mm x 260mm 2268kg 250 litre

2-Drum In-Line Pallet Product Model: 28234 3-Drum In-Line Pallet Product Model: 287034-Drum In-Line Pallet Product Model: 28704

4-Drum Square Pallet Model: 28254

EPA bund requirements are 110% of the largest drum stored or 25% of the total volume stored in drums, whichever is the greater.

28905

Page 8: Containment bunds • Spill Control • Emergency wash ... · Accumulation Centre for containment storage of small containers up to 20 litre drums Satellite Collection Site for Recyclables

211

Customer Service 1300 305 314 • www.backsafe-australia.com.au

SP

ILL, Sto

Ra

gE &

Co

nta

Inm

Ent

See page 216 for faucet description.

Laboratory Safety CansHave all the benefits of the Type I can, with a self-closing faucet for trouble free dispensing. Cans fitted with smaller faucet 08540 offer easier dispensing in lab environments, while faucet 08902 is better suited to industrial use. Available in two and four drum capacity.

Model Description

10307 3.8 litre with 8540 faucet

10707 11 litre with 8540 faucet

10709 11 litre with 8902 faucet

10807 19 litre with 8540 faucet

10809 19 litre with 8902 faucet

Type I Safety Cans

Type II Safety Cans

Model Description

10327 3.8 litre – 19mm hose

10527 7.6 litre – 19mm hose

10721 11 litre – 25mm hose

10821 19 litre – 25mm hose10327 10527 10821

108011050110301

Model Description

10101 0.9 litre capacity

10201 1.9 litre capacity

10301 3.8 litre capacity

10501 7.6 litre capacity

10555 10 litre capacity

10801 19 litre capacity

Safety CansAre a necessary part of compliance for safety in the workplace. They are also a useful, hardworking tool that add convenience while facilitating safe transfer of flammable liquids.

Features:

n Safely contain hazardous liquids and control vapours to reduce the risk of fire, protecting both personnel and facilities.

n Improve efficiency with ease-of-use features to enhance pouring and filling operations.

10807Shown with (08540) faucet

Are designed with a single spout for filling and pouring. Cans up to 3.8 litres feature a trigger release handle while larger capacities have a swinging handle. All models are equipped with a dual-density flash arrester. To protect against explosion positive pressure relief mechanism automatically vents between 3-5 PSI.

Offer additional convenience with two openings at the top. One opening is equipped with a flexible metal hose for accurate pouring and decanting. A second opening, positioned behind the handle, is used for filling. All Type II cans have a swing handle for ease of transport.

Page 9: Containment bunds • Spill Control • Emergency wash ... · Accumulation Centre for containment storage of small containers up to 20 litre drums Satellite Collection Site for Recyclables

212

SP

ILL,

Sto

Ra

gE

& C

on

taIn

mEn

t

Customer Service 1300 305 314 • www.backsafe-australia.com.au

Type I Non-metallic Safety CansAre constructed from high density polyethylene providing resistance to tough acids and corrosives. The self close cap, pressure relief mechanism and dual-density flash arrestor work together to prevent ignition sources entering without restricting liquid flow. Choose plated steel hardware or stainless steel for maximum chemical resistance.

Model Description

14140 3.8 litre plated steel hardware

14160 3.8 litre stainless steel hardware

14251 10 litre plated steel hardware

14261 10 litre stainless steel hardware

14501 19 litre plated steel hardware

14561 19 litre stainless steel hardware

Self-close Corrosive Containers

Model Description

14009 0.5 litre polyethylene squeeze bottle

14011 1 litre polyethylene squeeze bottle

Dispensing Bottles

Model Description

12161 3.8 litre acid container

12762 7.6 litre wide mouth acid container

12745 19 litre wide mouth acid container

14009

1274512161

1426114501

Are constructed from polyethylene and stainless steel. Ball valve ensures safer smoother dispensing of flammable liquids directly onto small components with minimum over spray. Stem can be shaped to dispense into ‘hard to get at’ areas.

Liquid Disposal Cans

Model Description

14722 7.6 litre capacity

14755 19 litre capacity

14722

Are made from high density polyethylene for superior chemical resistance and leak protection. Large and strategically placed opening offers controlled filling and pouring during disposal.When closed, cap automatically vents between 3-5 PSI. A flame arrestor guards against outside ignition.

Non-metallic Laboratory Cans

Model Description

14169 3.8 litre with stainless steel faucet

14590 19 litre with 8902 faucet

1459014169

Have all the benefits of the Type I cans with the addition of a self closing faucet for easy dispensing. All fill spouts have a pressure relief cap with a flash arrestor.

Self-close corrosive containers are constructed of translucent high density polyethylene, providing resistance to acids and caustics. Spring close cap provides a tight seal. Flame arrestor-free spout allows quick pouring of non-flammable corrosives.

Page 10: Containment bunds • Spill Control • Emergency wash ... · Accumulation Centre for containment storage of small containers up to 20 litre drums Satellite Collection Site for Recyclables

213

Customer Service 1300 305 314 • www.backsafe-australia.com.au

SP

ILL, Sto

Ra

gE &

Co

nta

Inm

Ent

Permit easy one handed dispensing of liquids directly on to work surface. Brass dispensing valves are self closing to minimise spills.

Rinse TanksProvide a generous sized space where larger parts (up to 870mm long) can be immersed. The self closing cover is foot operated so it can be opened by a worker when both hands are full. A 3/4” drain plug allows for easy solvent replacement.

Model Description Dimensions (mm)

27110 42 litre rinse tank 600L x 400W x 210D

27220 84 litre rinse tank 875L x 400W x 300D

27003 parts basket for 27110

27005 parts basket for 27220

Dip TanksFor cleaning smaller parts where volume of work does not warrant use of rinse tank.

Wash TanksFor small parts cleaning – supplied with parts basket.

Model Description Dimensions (mm)

27605 19 litre dip tank – no basket 340Ø ∅ x 325H

27608 30 litre dip tank – no basket 380Ø ∅ x 355H

27712 7.6 litre with parts basket 280Ø ∅ x 280H

27713 13 litre with parts basket 330Ø ∅ x 325H

27716 23 litre with parts basket 380Ø ∅ x 360H

Plunger Cans

Model Description

10108 1 litre plunger can

10208 1.9 litre plunger can

10308 3.8 litre plunger can

14018 1 litre non-metallic plunger can

Non-metallic Dispensing Bottles

Model Description

14002 0.25 litre dispensing bottle

14004 0.5 litre dispensing bottle

14010 1 litre dispensing bottle

Bench CansProvide an easy means of cleaning small parts in solvent. Simply place work on spring loaded perforated dasher plate, press down and agitate, then release to return dasher plate to drain position.

Model Description

10295 1 litre bench can

10370 3.8 litre bench can

10375 3.8 litre bench can (no basket)

10575 7.6 litre bench can

10775 11 litre bench can

27220 Rinse Tank

27005 Parts Basket

27605

14004

14010

14002

10295 10370

10208

10308

14018

Help you quickly and easily moisten cleaning cloths or swabs. Pushing down on the brass pump assembly fills upper pan with a measured amount of liquid for moistening. Surplus liquid drains safely back into reservoir.

Page 11: Containment bunds • Spill Control • Emergency wash ... · Accumulation Centre for containment storage of small containers up to 20 litre drums Satellite Collection Site for Recyclables

214

SP

ILL,

Sto

Ra

gE

& C

on

taIn

mEn

t

Customer Service 1300 305 314 • www.backsafe-australia.com.au

Drum CoversDrum covers provide an inexpensive way to convert open-top 60 and 205 litre drums into fire-resistant receptacles, for combustible trash. The cover features a replaceable fusible-link assembly that melts to automatically slam the cover shut if there is a fire in the drum. Covers available with or without drums – see below.

Model Description

26715 Self close cover for 60 litre drum

26750 Self close cover for 205 litre drum

26715D 60 litre steel drum only

26750D 200 litre steel drum only

Countertop Oily Waste CanThe Countertop Oily Waste Can opens to no more than a 60° angle and stays closed when not in use, isolating contents from fire sources and limiting oxygen to reduce the risk of spontaneous combustion. Its compact size makes it small enough to use at any workstation.

Model Dimensions (mm)

09200 8 litre 245Ø x 230H

Model Description Dimensions (mm)

09100 23 litre 300Ø x 400H

09300 38 litre 350Ø x 455H

09500 55 litre 400Ø x 510H

09700 80 litre 460Ø x 580H

Oily Waste CansAre essential whenever solvent cloths and wiping rags are used. Rags and cloths soaked with solvents, thinners and other flammable liquids present a serious fire risk when improperly discarded. The specially designed lid opens no more than 60 degrees and stays closed when not in use, isolating contents from fire sources and limiting oxygen so risk of spontaneous combustion is virtually eliminated.

Self-closing cover reduces oxygen source to prevent fire from starting

Popular foot-operated models leave hands free. Cover snaps shut when pedal is released.

Reinforcing ribs protect sides from dents and abuse

26750

26715D 60 litre steel drum with 26715 self-closing cover to suit

09200

Page 12: Containment bunds • Spill Control • Emergency wash ... · Accumulation Centre for containment storage of small containers up to 20 litre drums Satellite Collection Site for Recyclables

215

Customer Service 1300 305 314 • www.backsafe-australia.com.au

SP

ILL, Sto

Ra

gE &

Co

nta

Inm

Ent

Spill Control FunnelsLarge diameter funnels provide an effective way to collect liquids and keep drum tops clean. Polyethylene Spill Control Funnels Fit all closed head 205 litre drums. Low profile, wide diameter opening offers large ‘target’ for quick, easy pouring. Scalloped, sloping design minimises splash and prevents containers from resting in their own liquids. Large flat well at the throat of funnel allows for passive draining of paint cans, filters, buckets and other containers.Funnel for Flammables includes a drum fill vent with 6” perforated brass flame arrestor. Threaded bung cap seals in flammable vapours under normal storage conditions. In high temperatures, pressure relief valve opens to protect drum and prevent explosion. Flame arrestor prevents fire flashback.

Model Description Diameter

28210 Funnel for non-flammables 525mm

28211 Funnel for flammables 525mm

28215 Cover for funnel 28210 480mm

Model Description

10376 Drip Can 230mmØ x 115mmH

10177 Spill Tray 345mmØ x 30mmH

Drip Can/Spill TraySpill control accessories are ideal for placement below drum faucets where spills can create a fire hazard. Perforated metal fire baffle acts as a flame arrestor to protect contents from fire exposure.Drip Can catches up to one gallon of liquid and top removes for quick cleaning. Made of 24-gauge coated steel with a durable powder paint finish, can is easily portable with handy side handles.Spill Tray has low profile, large diameter surface to contain spills an overfill with a one quart capacity. Constructed of 24-gauge coated steel, tray easily supports safety cans up to 19 litre capacity.

10376 10177

Safety Drum FunnelsLarge mouth allows fast dumping while minimising spills. Hinged cover reduces spread of vapours. Models 08207 and 08205 have a fusible-link actuated cover. Funnels intended for use with flammable are fitted with a brass flash arrestor. For viscous non-flammables model no. 08208 is fitted with a 800mm open end brass tube to direct liquid flow.

Model Description Mouth Diameter

08202 Small funnel with manual close cover, 25mm flash arrestor for use with 20 litre drums

110mm

08207 Large funnel with self closing cover with 150mm flash arrestor for use with flammables

270mm

08208 Large funnel with self close cover and 800mm brass tube for use with viscous liquids

270mm

10177 spill tray

Model 08207

28211 Funnel with flash arrester

28210 funnel28215 funnel cover

Page 13: Containment bunds • Spill Control • Emergency wash ... · Accumulation Centre for containment storage of small containers up to 20 litre drums Satellite Collection Site for Recyclables

216

SP

ILL,

Sto

Ra

gE

& C

on

taIn

mEn

t

Customer Service 1300 305 314 • www.backsafe-australia.com.au

Model Description

08496 3 metre flexible wirecoiled, hand clamp x 6mm terminal

08497 3 metre insulated wirecoiled, hand clamp x 6mm terminal

08498 1 metre flexible wire, C clamp x hand clamp

08499 1 metre flexible wire, dual hand clamps

08500 1 metre flexible wire, dual alligator clips 16mm

08501 1 metre flexible wire, C clamp x alligator clip 16mm

08503 1 metre flexible wire, dual terminals 6mm

08505 1 metre insulated wire, C clamp x alligator clip 16mm

08506 1 metre insulated, dual terminals 6mm

08507 1 metre insulated wire, C clamp x pipe clamp, 70mm jaw

Antistatic WiresPrevent sparks from static electricity generated by movement and flow of flammable liquids.

08499

08501

08506 0850008503 08507

Flexible wire

Drum FaucetsSeries 08900/08500 self-closing safety faucets incorporate an internal flame arrestor. Brass and stainless steel faucets feature a Teflon® seal. Adjustable models screw tightly into drum and can then be adjusted to right position, with spout downward, without thread damage or leakage. Faucet extension provides extra accuracy and prevents spills.For trouble-free dispensing of viscous non-corrosive flammables such as adhesives, paint or heavy oils above 2000 SSU (about 30W oil), use two inch drum valves and/or ¾ inch viscous liquid faucets. Flame arrestors are not provided on viscous liquid faucets.

Ryton Rotary Drum Pumpn Delivers approx. 20LPM

or 0.33 litres per rotation n Includes a unique rotating

2 piece discharge spout n Ryton and stainless

steel construction for exceptional chemical resistance

n Rotary action facilitates quick and effortless transfer of chemicals

n Suitable for the transfer of chemicals, alkalise and week acids

n Suitable both 60 litre drums.

Polypropylene Rotary Drum Pumpn Delivers approx. 20 LPM or

0.33 litres per rotation stainless

n Steel vane spring n Polypropylene pump bodyn Rotary Action Facilitates

quick and effortless transfer or degreasers, disinfectants, herbicides and pesticides

n Suitable both 60 litre and 205 litre drums

Polypropylene Piston Pumpn Delivers approx. 0.25 L on the down siden PTFE coated nitrate “U” seal n Telescopic down-tube suits 60/205Ln Suitable for the transfer of disinfectants, herbicides and pesticides

Polypropylene Lever Pumpn Delivers approx. 0.33 L on

the down stroken Robust pump tested to over

2 million strokes n Telescopic down-tube suits

60/205Ln Suitable for the transfer of

detergents, degreasers, anti-freeze and paraffin

Model Description

08902 Faucet, ¾” NPT rigid, brass

08910 Faucet, ¾” NPT adjustable, brass

08916 Faucet, ¾” NPT rigid, stainless steel

08587 Flexible faucet extension, 150mm long, stainless steel

08584 Flexible faucet extension, 150mm long, brass (with 08540)

08955 Faucet, ¾” NPT brass, viscous liquids

08552 Drum gate valve, 2” NPT brass, viscous liquids

08540 Control flow lab safety faucet, ¾” brass

08587

08955

0854008902

08552

Model BA 401AModel BA 301A

Model BA950

Model BA925

Page 14: Containment bunds • Spill Control • Emergency wash ... · Accumulation Centre for containment storage of small containers up to 20 litre drums Satellite Collection Site for Recyclables

217

Customer Service 1300 305 314 • www.backsafe-australia.com.au

SP

ILL, Sto

Ra

gE &

Co

nta

Inm

Ent

Model Description

08101 Brass vertical vent for petroleum based applications. Use only in vertical position.

08006 Non-metallic vertical vent, stainless steel flame arrestor, for chlorinated solvents. Use only in vertical position.

08300 Brass horizontal vent for petroleum-based applications

08306 Stainless steel horizontal vent for corrosives and general solvents

Fast Flow Drum Gate

Model Description

S200/B 2” brass self closing valve

S200/TB Teflon replacement blade

The 50mm (2” BSP) heavy duty brass sliding drum valve is designed for dispensing heavy type non-corrosive viscous liquids. The Teflon sealing blade gives positive closing action. Strong spring ensures self closing action.

Flo-King® Plastic Faucets2” Plastic Drum Tap to suit large bung in both plastic and steel drums.

Options: Thread adaptors available to suit various drum thread requirements.

Non-Sparking Safety ToolsBacksafe Australia supply an extensive range of non-sparking tools for use in hazardous and flammable environments. Please inquire for further information.Treacle Gate

Sliding action, cast iron construction for non-flammable viscous products – oil, treacle etc. Suits large (2”) bung in drums.

Available in both brass or stainless steel construction. Screws easily into the ¾” BSP (small) bung opening in metal drums. Features self closing lever with Teflon seal for positive sealing.

Options: A flexible decanting hose is available in both brass or stainless steel construction.

Drum VentsDrums of flammable liquids require venting to relieve pressure build-up due to heat and also to prevent creation of a vacuum when liquid is being drained off or the drum is subjected to sudden cooling.

Drum vents provide automatic pressure relief. Operating valve opens at 5 PSI internal pressure in normal service. Vacuum relief is manual or automatic depending on the model and permits 4 or more GPM flow through a standard ¾” faucet. All vents include a flame arrestor for added safety.

Plastic Dispensing Faucets

Backsafe Australia stock a range of faucets to suit plastic drums and carboys. Ask Sales for further information.

Model S34/B

Model S200/B

Model DF-201

Model S-DW Drum wrench pictured

Model 64GV

Model SW-19

08306

08006

08101

08300

Warning: Always check chemical compatibility with equipment before pumping or dispensing. Take all necessary safety precautions.

Model Description

S34/B ¾” brass self closing faucet

S34/S ¾” stainless steel self closing faucet

8930 Brass flexible extension, 200mm

8587 Stainless steel flexible extension, 200mm

Model S34/S

Self Closing Drum Faucets

Page 15: Containment bunds • Spill Control • Emergency wash ... · Accumulation Centre for containment storage of small containers up to 20 litre drums Satellite Collection Site for Recyclables

218

SP

ILL,

Sto

Ra

gE

& C

on

taIn

mEn

t

Customer Service 1300 305 314 • www.backsafe-australia.com.au

BuddiMore than just a friend, Buddi is with you in your personal fight on spills. Bring along your Buddi for use in vehicles, laboratories, paint storage, chemical decanting, fleet vehicles, construction, he will go wherever you go. Includes a boom, pads and absorbents to combat oil and fuels, chemicals, most acids and alkalis. Comes with safety gear, instructions and MSDS. Available with bio-hazard spill response, ask for Buddi PLUS. Stick with him, he is your Buddi.

Contains:

n 1 x 4kg Pack Optisorb 40

n 1 x 1.2m x 75mm Optisorb Absorbent Boom

n 1 x .5kg pack Sorbz Absorbent Pads = approximately 70 pads at 320mm x 420mm

n 1 x Heavy Duty PVC Elbow length gloves

n Spill Response instructions and MSDS

DOK-240The DOK-240 stands guard over the most demanding industries. When called on this ‘King of the Kits’ offers an armoury of absorbents, booms and pads to combat any evil liquid, including chemicals, oils and fuels, and most acids and alkalis. Forget half measures; declare war on all spills with this big fella. Comes with safety cones and safety gear, all instructions and MSDS. DOK-240 can be upgraded to include bio-hazard spill control. Ask for DOK-240 PLUS.

Contains:

n Labelled 240L Orange Spill response bin

n 2 x 20L Optisorb 40 Organic Absorbent in resealable plastic container

n 1 x 3.6m x 75mm Optiboom Absorbent Boom

n 2 x 2.4m x 75mm Optiboom Absorbent Booms

n 4 x 1kg pack Sorbz Absorbent Pads = approximately 560 pads at 320mm x 420mm

n 1 x Elbow length PVC Safety Gloves

n 1 x Super Size Dustpan and Brush Set

n 4 x Heavy Duty ëcontaminated wasteí disposal bags

n 2 x Safety Cones

n Spill Response instructions and MSDS

DOK-120For complete war on spills; the DOK-120. The flexible weapon for deployment in all industries. This ‘little Dokí’ packs a big punch for all liquid spills. Offering booms, pads and absorbents for chemicals, oils and fuels and most acids and alkalis. Includes safety cones and safety gear. Instructions and MSDS. If you want a reliable , strategic spill soldier, DOK-120 fits the scene. DOK-120 can include bio-hazard spill control, ask for DOK-120 PLUS.

Contains:

n Labelled 120L Orange Spill response bin

n 1 x 20L Optisorb 40 Organic absorbent

n 2 x 2.4m x 75mm Optiboom absorbent booms

n 2 x 1kg pack Sorbz Absorbent Pads = approximately 280 pads at 320mm x 420mm

n 1 x Elbow length PVC safety gloves

n 1 x Super Size Dustpan and Brush Set

n 2 x Heavy Duty ëcontaminated wasteí disposal bags

n 1 x Safety Cones

n Spill Response instructions and MSDS

Spill Response Kits

Page 16: Containment bunds • Spill Control • Emergency wash ... · Accumulation Centre for containment storage of small containers up to 20 litre drums Satellite Collection Site for Recyclables

219

Customer Service 1300 305 314 • www.backsafe-australia.com.au

SP

ILL, Sto

Ra

gE &

Co

nta

Inm

Ent

Emergency Showers & Eye/Face WashesA must for workplaces where hazardous substances are present or worked with. These showers and eye/face wash units are simple to install, access and use.

These units are an effective and fast method of getting workers out of dangerous and/or fatal situations.

Model GSE 670 PO Multi-Spray Shower with Eye/Face Wash

Features:n Multi-spray shower with eye/face wash

n 16 spray heads with individual volume adjustment

n 3 stainless steel panels

n Dual independent platform operation of shower and eye/face wash

Portable Eye Wash UnitModel SE 4000Features:n 79 litre capacity

n Gravity flo eye/face wash

Combination Deluge Showers with Eye/Face WashModel SE 607Features:n Deluge Shower

n Aerated eye/face wash

n Stainless Steel Bowl

n Hand and foot operated

Model SE 663 PO

Features:n Multi-spray shower with eye/face wash

n 16 spray heads with individual volume adjustment

n 2 stainless steel panels

n Platform operation of decontamination of shower

Model SE 480

Model SE 607

Page 17: Containment bunds • Spill Control • Emergency wash ... · Accumulation Centre for containment storage of small containers up to 20 litre drums Satellite Collection Site for Recyclables

220

SP

ILL,

Sto

Ra

gE

& C

on

taIn

mEn

t

Customer Service 1300 305 314 • www.backsafe-australia.com.au

Features:

n High quality construction using zinc-coated steel sheeting

n Powdercoat finish giving high resistance to splashes and spills

n All products designed to comply with Australian Standards and relevant Dangerous Goods Regulations

n All cabinets supplied inclusive of all relevant safety signage and directions

n Adjustable slow release user friendly hydraulic door control closure systems

n Stainless steel continuous pin hinging for reliable and accurate door closing

Accessoriesn Additional shelves available

n PVC shelf cover

n PVC spill tray to suit sump

Flammable Liquids storage cabinets to AS 1940

Corrosive Substances storage cabinets to AS 3780. Polyethylene spill trays

available

Organic Peroxide storage cabinets to AS 2714

Toxic Substances storage cabinets to AS/AZS 4452

Oxidizing Agents storage cabinets to AS 4326

SC03030 litre mini-safety cabinet suitable for

under bench storageSC060

60 litre Safety cabinet

SC100100 litre safety cabinet suitable for

under bench storage

SCVHeavy duty cabinet with rollers

for vertical 205 litres drum storage with room for pump or

shelves

Specifications

Model Drums storage Capacity Storage Capacity No. of Shelves External Internal

4 litre 20 litre litres Height Width Depth Height Width Depth

SC030 8 1 30 1 800 500 450 553 418 370

SC060 12 2 60 1 1065 500 450 818 418 370

SC100 24 3† 100 1 800 920 615 553 838 535

SC160 40 6† 160 1 1220 1100 450 973 1018 370

SC250 70 9† 250 2 1825 1100 450 1578 1018 370

SC205H 250 N/A 1370 760 1220 1123 678 1140

SCV 250 1 1850 806 804 1608 726 726

Please add goods class to order code, eg. SC250/3 All dimensions in mm

SC160160 litre safety cabinet

SC205HHorizontal drum storage safety cabinet for

205 litre drumSC250250 litre safety cabinet

The Backsafe Australia range of safety storage cabinets are built to the highest quality standards. Combining safety, convenience and quality, each of these cabinets offers genuine protection with maximum efficiency.

Page 18: Containment bunds • Spill Control • Emergency wash ... · Accumulation Centre for containment storage of small containers up to 20 litre drums Satellite Collection Site for Recyclables

221

Customer Service 1300 305 314 • www.backsafe-australia.com.au

SP

ILL, Sto

Ra

gE &

Co

nta

Inm

Ent

The New Super SeriesThis range of cabinets is the most user-friendly and space efficient large capacity safety cabinets available today. With individually self-closing and latching doors, independently adjustable shelving, dual compartments with separate spillage sumps and built-in vents with flash arrestors, these cabinets offer the superior design alternative to traditional compliance methods. Five new innovative designs are available now to suit every situation where higher quantities of dangerous goods stocks need to be stored safely and efficiently to Australian Standards requirements.

650 Litres650 litre heavy duty safety cabinet.

n Single width adjustable shelves

n Self-closing doors (1 locking door only)

n Roller Base available

850 Litres850 litre heavy duty safety cabinet.

n Separately adjustable shelves each side

n Dual sump compartment

n Individually self-closing doors

n Roller Base available

1 Pallet – 850 Litres850 litre heavy duty safety cabinet for pallet storage.

n Forklift accessible with hold open doors

n Heavy duty forklift protection to sump

n Fits all standard pallets

n Standard adjustable shelf allows for storage of two pallets of smaller drums

250 Litres250 litre heavy duty safety cabinet

n Adjustable shelves

n Self-closing doors

n Roller Base available

Roller Base optionEvery Super Series cabinet can be fitted with a roller base option to make lighter work of those heavy drums.

Model External Dimensions (mm) Container Capacity

Height Width Depth 4L 20L 60L 205L

PS251SS 1850 800 804 112 15 4 1

PS450SS 1850 1384 804 90 24 6 2

PS650SS 1850 1986 804 135 30 12 3

PS850SS 1850 2582 804 180 42 16 4

PS1000SS 1600 1384 1384 1 pallet 4

PS251SS

PS1000SS

PS450SS

PS650SS

PS850SS

450 Litres450 litre heavy duty safety cabinet

n Separately adjustable shelves each side

n Individually self-closing doors

n Roller Base available

Page 19: Containment bunds • Spill Control • Emergency wash ... · Accumulation Centre for containment storage of small containers up to 20 litre drums Satellite Collection Site for Recyclables

222

SP

ILL,

Sto

Ra

gE

& C

on

taIn

mEn

t

Customer Service 1300 305 314 • www.backsafe-australia.com.au

Features:

n Venting option with built-in flash arrestors

n Spark-proof, self latching locking system with lockable handle

n Drain plug to sump for safe disposal of spills

n Adjustable shelving heights

n Genuine sump capacities maintained with suspended grid floor

n Manufactured in Australia to conform and exceed AS 1940 – 1993 “The Storage and Handling of Flammable and Combustible Liquids”.

Model PS050Convenient where space is limited and

will safely store up to 50 litres. Has self-closing and self-latching door.

Model PS160Safe storage of up to 160 litres. In compact,

double depth format. Has self-closing and self-latching door.

Model PS080Will store up to 80 litres of dangerous goods. Compact for laboratories etc., and has self-

closing and self-latching door. Cabinet pictured is for storage of corrosives.

Model PS251Dual purpose cabinet for either vertical storage of 205 litre drums or with shelves for storage of up to 250 litres of smaller drums. Roller base

available.

Model PS250Lowline, double depth cabinet with a big

capacity. Will store up to 250 litres and has self-closing and self-latching doors.

Model PS161Single depth cabinet for easy access to more frequently used containers. Will store up to 160 litres. Has self-closing

and self-latching doors.

Specifications

Model Capacity No of Shelves

External Dimensions(mm)

Internal Dimensions(mm)

Container Capacity

Height Width Depth Height Width Depth 4 Litre 20 Litre 60 Litre 205 Litre

PS050 50L 1 695 784 454 450 700 365 14 2 - -

PS080 80L 1 1100 784 454 858 700 365 21 4 - -

PS160 160L 1 1100 784 804 858 700 718 42 8 2 -

PS161 160L 1 1100 1384 454 858 1300 365 42 8 - -

PS250 250L 1 1250 1166 804 1008 1082 718 92 14 3 1

PS251 250L 2 1850 806 804 1608 726 726 112 15 4 1

Page 20: Containment bunds • Spill Control • Emergency wash ... · Accumulation Centre for containment storage of small containers up to 20 litre drums Satellite Collection Site for Recyclables

223

Customer Service 1300 305 314 • www.backsafe-australia.com.au

SP

ILL, Sto

Ra

gE &

Co

nta

Inm

Ent

Non-Metallic Safety Cabinets for corrosive substances

n Made in Australia to comply with Australian Standards and Regulations

n Heavy duty welded construction

n Adjustable shelves

n Storage above sump or in sump

n Lockable self closing door

n Complies to AS3780 – 1994

n 3 convenient sizes available

n Dual compartment cabinets allow acids and bases to be conveniently stored in one cabinet

Specifications

Model Capacity Internal Dimensions External Dimensions

Model CP500 Cabinet 50 Litres 18 x 2.5L Winchesters with storage in sump

26 Litre Sump

585mmH (above sump) x 460mmW x 430mmD

800mmH x 500mmW x 470mmD

Model CP1000 (Dual Compartment)

Cabinet 100 Litres 36 x 2.5L Winchesters with storage in sump

2 x 26 Litre Sump

585mmH (above sump) x 460mmW x 430mmD

800mmH x 1000mmW x 470mmD

Model CP1600 (Dual Compartment)

Cabinet 160 Litres 54 x 2.5L Winchesters with storage in sump

2 x 26 Litre Sump

985mmH (above sump) x 460mmW x 430mmD

1225mmH x 985mmW x 470mmD

Polyethylene Storage CabinetOne piece polyethylene cabinets offer maximum protection against harsh acids and corrosives.

The undercounter polyethylene cabinet safely stores 30 x 1 litre bottles or a variety of containers. Each segregated compartment has an adjustable shelf and storage in both doors for small containers. Two removable sumps slide out for easy cleaning of incidental spills.

Model Capacity (Litres) External Dimensions(mm)

CP2416 30 x 1 litre bottles 900W x 590D x 875H

Model CP1000

Model CP500

Model CP2416

Model CP1600

Page 21: Containment bunds • Spill Control • Emergency wash ... · Accumulation Centre for containment storage of small containers up to 20 litre drums Satellite Collection Site for Recyclables

224

SP

ILL,

Sto

Ra

gE

& C

on

taIn

mEn

t

Customer Service 1300 305 314 • www.backsafe-australia.com.au

A modulated storage system providing external storage solutions for large volumes of dangerous goods.

Relocatable Bulk Dangerous Goods Stores

Features: Pictured: Model PR10Pallet relocatable outdoor dangerous goods store

Note: The Backsafe Australia range of relocatable dangerous goods storage units are manufactured to comply with the relevant standards. Full compliance with the relevant standards and regulations is dependent on correct positioning of the unit. As this is beyond the manufacturer/supplier’s control the end user must ensure that all regulations and requirements of the relevant standards are followed. Backsafe Australia always recommends that a site approval be obtained from the regulatory authority prior to positioning of the unit on site.

Suffix ‘D’ denotes double depth unit. Unit has access door both sides

Specifications

Storage Unit Type

Storage Capacity

Capacity in Pallets

External Dimensions (mm)

Approximate Internal Dimensions (mm)

Height Width Depth Height Width Depth

PR01 850 1 1585 1375 1300 1200 1250 1250

PR02 1650 2 1585 2625 1300 1200 2500 1250

PR02A 1650 2 2700 1375 1300 2325 1250 1250

PR04 3280 4 2700 2625 1300 2325 2500 1250

PR06 4920 6 2700 3975 1300 2325 3825 1250

PR08 6560 8 2700 5200 1300 2325 5050 1250

PR08D 6560 8 2700 2650 2550 2325 2500 2480

PR10 8200 10 2700 6575 1300 2325 6425 1250

PR12 9840 12 2700 7800 1300 2325 7650 2480

PR12D 9840 12 2700 3975 2550 2325 3825 2480

PR16 13120 16 2700 10400 1300 2325 10250 1250

PR16D 13120 16 2700 5225 2550 2325 5075 2480

PR20 16400 20 2700 13050 1300 2325 12900 1250

PR20D 16400 20 2700 6575 2550 2325 6425 2480

The Backsafe Australia range of relocatable bulk dangerous goods stores are an innovative alternative for immediate safe and efficient storage for large quantities of dangerous goods without the problems and expense associated with building fixed and permanent stores.

Superior design features maintain product handling efficiency whilst providing ultimate environmental protection for stocks of dangerous goods in confined or difficult circumstances.

Manufactured from heavy zinc-coated sheet and steel sections and coated with a highly resistant 2-pack polyurethane gloss finish, ensures many years endurance to the rugged Australian environment.

Each unit is built to the highest quality standards and exacting specifications to ensure many years of trouble free service. In design and manufacture, these units will exceed the requirements of AS 1940-1993 “The Storage and Handling of Flammable and Combustible Liquids”.

Page 22: Containment bunds • Spill Control • Emergency wash ... · Accumulation Centre for containment storage of small containers up to 20 litre drums Satellite Collection Site for Recyclables

225

Customer Service 1300 305 314 • www.backsafe-australia.com.au

SP

ILL, Sto

Ra

gE &

Co

nta

Inm

Ent

Features:

n Efficient loading and unloading with full side access bi-folding doors allowing for damage-free forklift access

n All product is forklift accessible at all times giving efficient stock control

n ISO locking bars and cam locks maintain high security

n All units designed to meet and exceed the requirements of the relevant Australian Standards

n Hi-build 2 pack polyurethane coating gaining improved protection against climatic factors and splashes and spills

n Galvanised steel frame construction designed to suit all Australian environmental conditions

n Heavy duty anchoring and earth bonding base plates

n Units are cyclone proof with engineered footing details provided

Single Depth StoresSpace saving single sided access stores with standard mid-height racking and bi-fold doors one side.

Relocatable Bulk Dangerous Goods Stores

Double Depth StoresEconomical dual sided access stores with mid-height racking and bi-fold doors both sides for large stocks of dangerous goods.

PR06

PR02

PR10

PR08

PR16D (Double Sided)

Relocatable Bulki Bund Store

Multi-purpose outdoor dangerous goods store

n Efficient, effective and more economical alternative to permanent buildings

n Full relocatable, giving the flexibility needed for changing circumstances

Page 23: Containment bunds • Spill Control • Emergency wash ... · Accumulation Centre for containment storage of small containers up to 20 litre drums Satellite Collection Site for Recyclables

226

SP

ILL,

Sto

Ra

gE

& C

on

taIn

mEn

t

Customer Service 1300 305 314 • www.backsafe-australia.com.au

Model Type Model Common Cylinder Storage Capacity External Dimensions

D Size

Ø175mm

E Size

Ø215mm

G Size

Ø250mm

G Size

Ø375mm

Acetylene

T Size

Ø310mm

Forklift LPG

S Size

Ø375mm

Large LPG

Height(mm)

Width(mm)

Depth(mm)

Dual Sided Access – Open Type

For combination type add a “C”

to code

G04D 8 6 6 4 4 4 2000 860 980

G060D 12 10 8 6 6 6 2000 1230 980

G08D 16 14 12 10 8 8 2000 1620 980

G10D 20 16 14 12 12 10 2000 1980 980

G12D 24 20 18 14 14 12 2000 2370 980

Dual Sided Access – Security Type

For combination type add a “C”

to code

G04DS 8 6 6 4 4 4 2000 860 980

G06DS 12 10 8 6 6 6 2000 1230 980

G08DS 16 14 12 10 8 8 2000 1620 980

G10DS 20 16 14 12 12 10 2000 1980 980

G12DS 24 20 18 14 14 12 2000 2370 980

Single Sided Access

With adjustable dividing system

G6SS 30 (5 div) 20 (4 div) 12 (3 div) 9 (2 div) 9 (2 div) 6 (2 div) 2000 1350 980

G12SS 42 (6 div) 30 (5 div) 20 (4 div) 15 (4 div) 15 (4 div) 12 (3 div) 2000 1750 1180

Forklift LPG Stores

GF04 4 1050 750 750

GF06 6 1050 1100 750

GF12 (Dual Height) 12 2000 1100 750

*Denotes room left to store smaller cylinders

Dual Sided Access StoresHeavy duty innovative dual sided entry gives unrestricted access to every cylinder with ease.

Open Type

n Central retaining bar at 2 levels

n Each cylinder individually restrained

n Unique fold down ramps both sides for safe access

n Forklift channel

n Crane lifting bar

n Complete portability

n Multi-fit design caters for all cylinder sizes

n Large range of sizes (see performance chart back page)

n Safety signs included

Manufactured to comply with AS 4332

Security Type

n High protection and safety standards with lock-up storage for all cylinder types

n Unique fold down ramps both sides

n Every cylinder accessible

n Each cylinder individually restrained at 2 levels

n Solid lockable doors

n Mesh ends to negate dangerous gas build-up

n Crane lifting bar

n Forklift channels

n Safety warning signs

Single Sided Access StoresHeavy duty single sided cylinder stores with an innovative adjustable restraint system catering for every cylinder type.

Forklift LPG StoresCompact storage modules specifically suited to forklift LPG cylinders and small LPG and general purpose cylinders.n Heavy duty designn Forklift channeln Restraining chainsn Safety warning signs

Model G6SS

Model GF12

Model GF04

Model G06D

Model G06DS

n All cylinders catered for

n Each cylinder individually restrained

n Fold down ramp

n Forklift channels

n Crane lifting bar

n Lock-up security

n Safety warning signs

n Fully adjustable restrainer bars to suit every cylinder size

Page 24: Containment bunds • Spill Control • Emergency wash ... · Accumulation Centre for containment storage of small containers up to 20 litre drums Satellite Collection Site for Recyclables

Customer Service: 1300 305 314 www.backsafe-australia.com.au

Page 25: Containment bunds • Spill Control • Emergency wash ... · Accumulation Centre for containment storage of small containers up to 20 litre drums Satellite Collection Site for Recyclables

o Cheque with order o Existing account o EFT- Electronic Fund Transfer

o Please charge my credit card: o Bankcard o Visa o Mastercard o Amex

Card Number:

Verification Number:

Cardholder’s Name _________________________________________________________

Expiry Date ________ / ________ Signature: ___________________________________

ABN 37 398 799 760

Your Support In The Work Place - Materials Handling Equipment

Customer Service: 1300 305 314

Priority Order Form Easy Fax Ordering: (08) 9354 9110Invoice To:Company:

Mailing Address:

State: P/code:

Contact Person:

Title:

Phone: ( )

Fax: ( )

Purchase Order No.:

ACN/ABN:

Signature: Date:

Deliver To:Company:

Address:

State: P/code:

Contact Person:

Email Address:

Special Instructions:

o Freight by Backsafe, please charge o Will pick up goods

o Via your nominated freight company. Please specify name:

Freight company:

Account No.: Contact No:

Additional Catalogue Request

Product Code Description Quantity Unit Price ex GST Total

For your convenience payments can be made directly to this Bank Account: BSB 016-499 Account 4831-82522 ANZ Willetton WA

Company: ............................................................................................................... Contact Person: .........................................................

Address: .....................................................................................................................................................................................................

Please send to:

Payment Methods:

29 Yampi Way, Willetton, W.A. 6155 PO Box 243, Willetton, Western Australia 6955

Telephone: (08) 9354 9111 Fax : (08) 9354 9110Email: [email protected]

Website: www.backsafe-australia.com.au

Page 26: Containment bunds • Spill Control • Emergency wash ... · Accumulation Centre for containment storage of small containers up to 20 litre drums Satellite Collection Site for Recyclables

1. Definitions1.1 “Seller” shall mean Backsafe Australia Pty Ltd T/A Backsafe Australia and its

successors and assigns.1.2 “Buyer” shall mean the Buyer or any person acting on behalf of and with the

authority of the Buyer.1.3 “Guarantor” means that person (or persons), or entity who agrees herein to be

liable for the debts of the Buyer on a principal debtor basis.1.4 “Goods” shall mean goods supplied by the Seller to the Buyer (and where the

context so permits shall include any supply of Services as hereinafter defined).1.5 “Services” shall mean all services supplied by the Seller to the Buyer and includes

any advice or recommendations (and where the context so permits shall include any supply of Goods as defined above).

1.6 “Price” shall mean the cost of the Goods as agreed between the Seller and the Buyer subject to clause 4 of this contract.

1.7 “Equipment” shall mean Goods supplied by the Seller to the Buyer for the purpose of loan, hire or evaluation.

2. Acceptance2.1 Any instructions received by the Seller from the Buyer for the supply of Goods

and/or the Buyer’s acceptance of Goods supplied by the Seller shall constitute acceptance of the terms and conditions contained herein.

2.2 Where more than one Buyer has entered into this agreement, the Buyers shall be jointly and severally liable for all payments of the Price.

2.3 Upon acceptance of these terms and conditions by the Buyer the terms and conditions are irrevocable and can only be rescinded in accordance with these terms and conditions or with the written consent of the manager of the Seller.

2.4 None of the Seller’s agents or representatives are authorised to make any representations, statements, conditions or agreements not expressed by the manager of the Seller in writing nor is the Seller bound by any such unauthorised statements.

2.5 The Buyer undertakes to give the Seller not less than fourteen (14) days prior written notice of any proposed change in the Buyer’s name and/or any other change in the Buyer’s details (including but not limited to, changes in the Buyer’s address, facsimile number, or business practice).

3. Goods3.1 The Goods are as described on the invoices, quotation, work authorisation or any

other work commencement forms as provided by the Seller to the Buyer.

4. Price And Payment4.1 At the Seller’s sole discretion the Price shall be either;

a) As indicated on invoices provided by the Seller to the Buyer in respect of Goods supplied; or

(b) The Seller’s current Price, at the date of delivery of the Goods, according to the Seller’s current Price list; or

(c) Seller’s quoted Price (subject to clause 4.2) which shall be binding upon the Seller provided that the Buyer shall accept in writing the Seller’s quotation within thirty (30) days.

4.2 Any variation from the plan of scheduled works or specifications will be charged for on the basis of the Seller’s quotation and will be shown as variations on the invoice. Payment for all variations must be made in full at their time of completion.

4.3 At the Seller’s sole discretion a deposit may be required. The deposit amount or percentage of the Price will be stipulated at the time of the order of the Goods and shall become immediately due and payable.

4.4 Time for payment for the Goods shall be of the essence and will be stated on the invoice, quotation or any other order forms. If no time is stated then payment shall be on delivery of the Goods.

4.5 The Seller may withhold delivery of the Goods until the Buyer has paid for them, in which event payment shall be made before the delivery date.

4.6 At the Seller’s sole discretion, payment for approved Buyers shall be made by instalments in accordance with the Seller’s delivery/payment schedule.

4.7 At the Seller’s sole discretion, for certain approved Buyers payment will be due thirty (30) days following the date of the invoice.

4.8 Payment will be made by cash on delivery, or by cheque, or by bank cheque, or by credit card (plus any charges that maybe applicable), or by direct credit, or by any other method as agreed to between the Buyer and the Seller.

4.9 The Price shall be increased by the amount of any GST and other taxes and duties which may be applicable, except to the extent that such taxes are expressly included in any quotation given by the Seller.

5. Delivery Of Goods / Services5.1 Delivery of the Goods shall be made to the Buyer’s address. The Buyer shall

make all arrangements necessary to take delivery of the Goods whenever they are tendered for delivery, or delivery of the Goods shall be made to the Buyer at the Seller’s address.

5.2 Delivery of the Goods to a carrier, either named by the Buyer or failing such naming to a carrier at the discretion of the Seller for the purpose of transmission to the Buyer, is deemed to be a delivery of the Goods to the Buyer.

5.3 The costs of carriage and any insurance which the Buyer reasonably directs the Seller to incur, shall be reimbursed by the Buyer (without any set-off or other withholding whatever) and shall be due on the date for payment of the Price. The carrier shall be deemed to be the Buyer’s agent.

5.4 The failure of the Seller to deliver shall not entitle either party to treat this contract as repudiated.

5.5 The Seller shall not be liable for any loss or damage whatever due to failure by the Seller to deliver the Goods (or any of them) promptly or at all.

6. Risk6.1 If the Seller retains property in the Goods nonetheless, all risk for the Goods or

related to the use thereof passes to the Buyer (or prospective Buyer) on delivery.6.2 If any of the Goods are damaged or destroyed prior to property in them passing

to the Buyer, the Seller is entitled, without prejudice to any of its other rights or remedies under these Terms and Conditions of Trade (including the right to receive payment of the balance of the Price for the Goods), to receive all insurance proceeds payable for the Goods. This applies whether or not the Price has become payable under the Contract. The production of these terms and conditions by the Seller is sufficient evidence of the Seller’s rights to receive the insurance proceeds without the need for any person dealing with the Seller to make further enquiries.

7. Buyer’s Disclaimer7.1 The Buyer hereby disclaims any right to rescind, or cancel the contract or to sue

for damages or to claim restitution arising out of any misrepresentation made to him by any servant or agent of the Seller and the Buyer acknowledges that he buys the Goods relying solely upon his own skill and judgement.

8. Defects / Returns8.1 The Buyer shall inspect the Goods on delivery and shall within seven (7) days of

delivery notify the Seller of any alleged defect, shortage in quantity, damage or failure to comply with the description or quote. The Buyer shall afford the Seller an opportunity to inspect the Goods within a reasonable time following delivery if the Buyer believes the Goods are defective in any way. If the Buyer shall fail to comply with these provisions, the Goods shall be conclusively presumed to be in

accordance with the terms and conditions and free from any defect or damage.8.2 For defective Goods, which the Seller has agreed in writing that the Buyer is

entitled to reject, the Seller’s liability is limited to either (at the Seller’s discretion) replacing the Goods or repairing the Goods provided that:

(a) the Buyer has complied with the provisions of clause 8.1;

Backsafe Australia Pty Ltd T/A Backsafe Australia – Terms & Conditions of Trade(b) the Goods are returned at the Buyer’s cost within seven (7) days of the delivery

date.8.3 Goods made, modified or customised to special order or Buyer specification are

under no circumstances acceptable for credit or return. Cancellation of orders for special or non-catalogue items will definitely not be accepted, once these orders are in production.

9. Customised Goods The Buyer agrees that;

(a) customised Goods shall only be used for the specific purpose for which they have been customised, and

(b) the Buyer shall be solely responsible for ensuring that the Goods are operated in compliance with all Occupational Safety & Health requirements and any other relevant safety standards or legislation.

9.2 The Buyer agrees to indemnify the Seller against any claims or damages, howsoever arising, out of any breach by the Buyer of clause 9.1

10. Warranty For Goods not manufactured by the Seller, the warranty shall be the current

warranty provided by the manufacturer of the Goods. The Seller shall not be bound by nor be responsible for any term, condition, representation or warranty other than that which is given by the manufacturer of the Goods.

11. The Commonwealth Trade Practices Act 1974 and Fair Trading Acts11.1 Nothing in this agreement is intended to have the effect of contracting out of any

applicable provisions of the Commonwealth Trade Practices Act 1974 or the Fair Trading Acts in each of the States and Territories of Australia, except to the extent permitted by those Acts where applicable.

12. Unpaid Seller’s Rights To Dispose Of Goods12.1 In the event that:

(a) the Seller retains or regains possession or control of the Goods; and(b) payment of the Price is due to the Seller; and(c) the Seller has made demand in writing of the Buyer for payment of the Price

in terms of this contract; and(d) the Seller has not received the Price of the Goods, then, whether the property

in the Goods has passed to the Buyer or has remained with the Seller, the Seller may dispose of the Goods and may claim from the Buyer the loss to the Seller on such disposal.

13. Default & Consequences Of Default13.1 Interest on overdue invoices shall accrue from the date when payment becomes

due daily until the date of payment at a rate of 2.5% compounding per calendar month and shall accrue at such a rate after as well as before any judgement.

13.2 If the Buyer defaults in payment of any invoice when due, the Buyer shall indemnify the Seller from and against all the Seller’s costs and disbursements including on a solicitor and own client basis and in addition all of the Seller’s nominees costs of collection.

13.3 Without prejudice to any other remedies the Seller may have, if at any time the Buyer is in breach of any obligation (including those relating to payment), the Seller may suspend or terminate the supply of Goods to the Buyer and any of its other obligations under the terms and conditions. The Seller will not be liable to the Buyer for any loss or damage the Buyer suffers because the Seller exercised its rights under this clause.

13.4 If any account remains unpaid at the end of the second month after supply of the Goods or Services an immediate amount of the greater of $20.00 or 10.00% of the amount overdue shall be levied for administration fees which sum shall become immediately due and payable.

13.5 In the event that:(a) any money payable to the Seller becomes overdue, or in the Seller’s opinion

the Buyer will be unable to meet its payments as they fall due; or(b) the Buyer becomes insolvent, convenes a meeting with its creditors or proposes

or enters into an arrangement with creditors, or makes an assignment for the benefit of its creditors; or

(c) a receiver, manager, liquidator (provisional or otherwise) or similar person is appointed in respect of the Buyer or any asset of the Buyer,

then without prejudice to the Seller’s other remedies at law:(i) the Seller shall be entitled to cancel all or any part of any order of the Buyer

which remains unperformed in addition to and without prejudice to any other remedies; and

(ii) all amounts owing to the Seller shall, whether or not due for payment, immediately become payable in addition to the interest payable under clause 13.1 hereof.

14. Title14.1 It is the intention of the seller and agreed by the Buyer that property in the Goods

shall not pass until: (a) The Buyer has paid all amounts owing for the particular Goods, and

(b) The Buyer has met all other obligations due by the Buyer to the Seller in respect of all contracts between the Seller and the Buyer, and that where practicable the Goods shall be kept separate until the Seller shall have received payment and all other obligations of the Buyer are met.

14.2 Receipt by the Seller of any form of payment other than cash shall not be deemed to be payment until that form of payment has been honoured, cleared or recognised and until then the Seller’s ownership of rights in respect of the Goods shall continue.

14.3 It is further agreed that: (a) Until such time as ownership of the Goods shall pass from the Seller to the

Buyer the Seller may give notice in writing to the Buyer to return the Goods or any of them to the Seller. Upon such notice the rights of the Buyer to obtain ownership or any other interest in the Goods shall cease.

(b) The Seller shall have the right of stopping the Goods in transit whether or not delivery has been made; and

(c) If the Buyer fails to return the Goods to the Seller then the Seller or the Seller’s agent may enter upon and into land and premises owned, occupied or used by the Buyer, or any premises as the invitee of the Buyer, where the Goods are situated and take possession of the Goods.

(d) The Buyer is only a bailee of the Goods and until such time as the Seller has received payment in full for the Goods then the Buyer shall hold any proceed from the sale or disposal of the Goods on trust for the Seller.

(e) The Buyer shall not deal with the money of the Seller in any way which may be adverse to the Seller.

(f) The Buyer shall not charge the Goods in any way nor grant nor otherwise give any interest in the Goods while they remain the property of the Seller.

(g) The Seller may require payment of the Price or the balance of the Price due together with any other amounts due from the Buyer to the Seller arising out of these terms and conditions, and the Seller may take any lawful steps to require payment of the amounts due and the Price.

(h) The Seller can issue proceedings to recover the Price of the Goods sold notwithstanding that ownership of the Goods may not have passed to the Buyer.

(i) Until such time that ownership in the Goods passes to the Buyer, if the Goods are so converted, the parties agree that the Seller will be the owner of the end products.

15. Security And Charge15.1 Despite anything to the contrary contained herein or any other rights which the

Seller may have howsoever:(a) Where the Buyer and/or the Guarantor (if any) is the owner of land, realty or

any other asset capable of being charged, both the Buyer and/or the Guarantor agree to mortgage and/or charge all of their joint and/or several interest in the said land, realty or any other

asset to the Seller or the Seller’s nominee to secure all amounts and other monetary obligations payable under the terms and conditions. The Buyer and/or the Guarantor acknowledge and agree that the Seller (or the Seller’s nominee) shall be entitled to lodge where appropriate a caveat, which caveat shall be released once all payments and other monetary obligations payable hereunder have been met.

(b) Should the Seller elect to proceed in any manner in accordance with this clause and/or its sub-clauses, the Buyer and/or Guarantor shall indemnify the seller from and against all the Seller’s costs and disbursements including legal costs on a solicitor and own client basis.

(c) To give effect to the provisions of clause [15.1 (a) and (b)] inclusive hereof the Buyer and/or the Guarantor (if any) do hereby irrevocably nominate constitute and appoint the Seller or the Seller’s nominee as the Buyer’s and/or Guarantor’s true and lawful attorney to execute mortgages and charges (whether registerable or not) including such other terms and conditions as the Seller and/or the Seller’s nominee shall think fit in his/her/its/their absolute discretion against the joint and/or several interest of the Buyer and/or the Guarantor in any land, realty or asset in favour of the Seller and in the Buyer’s and/or Guarantor’s name as may be necessary to secure the said Buyer’s and/or Guarantor’s obligations and indebtedness to the Seller and further to do and perform all necessary and other acts including instituting any necessary legal proceedings, and further to execute all or any documents in the Seller’s absolute discretion which may be necessary or advantageous to give effect to the provisions of this clause.

16. Cancellation16.1 The Seller may cancel these terms and conditions or cancel delivery of Goods at

any time before the Goods are delivered by giving written notice. The Seller shall not be liable for any loss or damage whatever arising from such cancellation.

At the Sellers sole discretion the Buyer may cancel delivery of Goods. In the event that the Buyer cancels delivery of Goods the Buyer shall be liable for any costs incurred by the Seller up to the time of cancellation.

17. Privacy Act 198817.1 The Buyer and/or the Guarantor/s agree for the Seller to obtain from a credit-

reporting agency a credit report containing personal credit information about the Buyer and Guarantor/s in relation to credit provided by the Seller.

17.2 The Buyer and/or the Guarantor/s agree that the Seller may exchange information about Buyer and Guarantor/s with those credit providers named in the Application for Credit account or named in a consumer credit report issued by a reporting agency for the following purposes:

(a) To assess an application by Buyer; (b) To notify other credit providers of a default by the Buyer;

(c) To exchange information with other credit providers as to the status of this credit account, where the Buyer is in default with other credit providers; and

(d) To assess the credit worthiness of Buyer and/or Guarantor/s.17.3 The Buyer consents to the Seller being given a consumer credit report to collect

overdue payment on commercial credit (Section 18K(1)(h) Privacy Act 1988).17.4 The Buyer agrees that Personal Data provided may be used and retained by

the Seller for the following purposes and for other purposes as shall be agreed between the Buyer and Seller or required by law from time to time:

(a) provision of Services & Goods;(b) marketing of Services and/or Goods by the Seller, its agents or distributors in

relation to the Services and Goods;(c) analysing, verifying and/or checking the Buyer’s credit, payment and/or status

in relation to provision of Services/Goods;(d) processing of any payment instructions, direct debit facilities and/or credit

facilities requested by Buyer; and(e) enabling the daily operation of Buyer’s account and/or the collection of

amounts outstanding in the Buyer’s account in relation to the Services and Goods.

17.5 The Seller may give information about the Buyer to a credit reporting agency for the following purposes:

(a) to obtain a consumer credit report about the Buyer; and/or(b) allow the credit reporting agency to create or maintain a credit information file

containing information about the Buyer.

18. General18.1 If any provision of these terms and conditions shall be invalid, void, illegal or

unenforceable the validity, existence, legality and enforceability of the remaining provisions shall not be affected, prejudiced or impaired.

18.2 All Goods supplied by the Seller are subject to the laws of Western Australia and the Seller takes no responsibility for changes in the law which affect the Goods supplied. Should any claim or remedy require to be processed under the laws of Western Australia then said judicial process shall only take place in the Metropolitan area of Perth of Western Australia irrespective of the location of the Buyer.

18.3 The Seller shall be under no liability whatever to the Buyer for any indirect loss and/or expense (including loss of profit) suffered by the Buyer arising out of a breach by the Seller of these terms and conditions.

18.4 In the event of any breach of this contract by the Seller the remedies of the Buyer shall be limited to damages. Under no circumstances shall the liability of the Seller exceed the Price of the Goods.

18.5 The Buyer shall not set off against the Price amounts due from the Seller.18.6 The Seller may license or sub-contract all or any part of its rights and obligations

without the Buyer’s consent.18.7 The Seller reserves the right to review these terms and conditions at any time

and from time to time. If, following any such review, there is to be any change in such terms and conditions, that change will take effect from the date on which the seller notifies the Buyer of such change.

18.8 Neither party shall be liable for any default due to any act of God, war, terrorism, strike, lock out, industrial action, fire, flood, drought, storm or other event beyond the reasonable control of either party.

19. Equipment Loan / Hire / Evaluation19.1 The Equipment shall at all times remain the property of the Seller and is returnable

on demand by the Seller. In the event that the Equipment is not returned to the Seller in the condition in which it was delivered the Seller retains the right to charge the Price of repair or replacement of the Equipment.

19.2 The Buyer shall;(a) keep the Equipment in their own possession and control and shall not assign

the benefit of the Equipment nor be entitled to lien over the Equipment.(b) not alter or make any additions to the Equipment including but without

limitation altering, make any additions to, defacing or erasing any identifying mark, plate or number on or in the Equipment or in any other manner interfere with the Equipment.

(c) keep the Equipment, complete with all parts and accessories, clean and in good order as delivered, and shall comply with any maintenance schedule as advised by the Seller to the Buyer.

19.3 The Buyer accepts full responsibility for the safekeeping of the Equipment and the Buyer agrees to insure, or self insure, the Seller’s interest in the Equipment and agrees to indemnify the Seller against physical loss or damage including, but not limited to, the perils of accident, fire, theft and burglary and all other usual risks and will effect adequate Public Liability Insurance covering any loss, damage or

injury to property or persons arising out of the use of the Equipment. Further the Buyer will not use the Equipment nor permit it to be used in such a

manner as would permit an insurer to decline any claim.

© Copyright – EC Credit Control Pty Ltd - 2005

Page 27: Containment bunds • Spill Control • Emergency wash ... · Accumulation Centre for containment storage of small containers up to 20 litre drums Satellite Collection Site for Recyclables

INDEXAAbsorbents .........................................................................218Access Equipment Mobile Ladders..........................................100-110 Platform Steps.............................100-103,104-110Accumulation Centres .........................................................................210Aluminium Dual Purpose Handtruck.................................17,18 Flat Platform Trolleys...........................................22 Folding Hand Trucks............................................17 Steps and Ladders..........99-104,106-109,111,112Anti-Fatigue Matting ..................................................................188-190Anti-Static Wires .........................................................................216Appliance Hand Trolleys/Trucks ...........................................................................20Attachments Forklift..............................54-60,129-133,201-203 Tip-up bins................................................129-133Audio Visual Trolleys .............................................................................6

BBarriers ..................................................................180-185 Bollards Fixed....................................................184 Mobile...............................................................185Battery Electric Dumpmaster..............................................136-138 Scissor Lifts........................................................38 Stackers.........................................................47,48 Work Positioners............................................40-42Battery Lifter Hallins.................................................................42 Newton............................................................... 42Benches Mobile.....................................16,145-147,173,177 Modular...............................................144-147,173 Stainless Steel..............................................16,177 Utility/Packaging.........................................178,179Bench Scales ..................................................................191-193Bins Micro/Storage......................................121,122,158 Plastic Crates/Buckets...............................115-119 Tip-up/Self Dumping..................................130-133 Utility Trays........................................................122Bin Tippers ...........................................................129,134-138Bollards ..................................................................180-186Book Trolleys .............................................................................6Box Trucks ....................................................................24,124Brute Bins .........................................................................120Bulk Boxes .........................................................................125Bunding Products Covers...............................................................205 Pallets...............................................................206 Shelving............................................................206 Trolleys................................................206,207,209

CCabinets Drawer................................................168,169,170 Heavy Duty 1.65 tonne capacity.................169-170 High Capacity....................................................166 Industrial Storage................148, 151-153,164-172 Manifest............................................................187 Retractable Panel..............................................172 Tool....................................................164-167,172 Vertical Drawer...........................................171,172 Wall...................................................................165Caged Trolley .......................................................3-6,8-11,23,25Castors & Wheels ......................................................................26-32Chain .........................................................................180Chain Lever Blocks ...........................................................................77Chairs Ergo...........................................................174-176 Industrial....................................................174-176Chair Trolleys ...........................................................................18Clax Folding Cart .............................................................................9Containers Bulk Boxes........................................................125 Plastic........................................................115-125Container Ramps ...........................................................................56Containment Bunds Pallets........................................................205-210Contractor Ladders .........................................................................112Conveyors Dock-Less Loader................................................74 Expanding......................................................72-74 Gravity......................................................61-67,69 Power/Flex..........................................................72 Wheel Track....................................................70,71

29 Yampi Way, Willetton, W.A. 6155 PO Box 243, Willetton, Western Australia 6955

Telephone: (08) 9354 9111 Fax : (08) 9354 9110Email: [email protected]

Website: www.backsafe-australia.com.au

Corrosive Stores ..................................................................220-223Court Trolleys ...........................................................................22Crane Bridge/Overhead............................................79-83 Pivotal Track System......................................79-83 My-T-Lift.............................................................76 Shop Floor...........................................................56Crane Scales .........................................................................193Crates Plastic........................................................115-118Crowd Control ..................................................................180-183

DDangerous Goods Cabinets.....................................................220-225 Handling Products........................205-218,220-226 Storage......................................................220-226Deluxe Order Picking Ladder ..........................................................................108Desk Dolley ............................................................................21Dispensing Bottles ...................................................................212,213Dock-Less Trailer Loader ............................................................................74Dolleys Desk....................................................................21 Drum.................................................................196 Furniture..............................................................21Drafting Stools ..........................................................................176Drawer Systems ...................................................................148,149Drum Covers...............................................................214 Cradles/Dolleys...........................................195,196 Decanting Products...............195,196,206,207,209, ..................................................................215-217 De-Palletiser...............................................198,199 Funnels......................................................207,215 Grab..................................................................203 Jack..................................................................196 Lifting Products..........................................195-203 Pumps...............................................................216 Rack Bunding....................................................206 Rotators................................................40,200-202 Spill Control...............................................205-210 Storage........................................205-210,221-225 Taps..................................................................217 Trolleys................................................206,207,209 Trucks........................................................196-197 Vents.................................................................217D Span Shelving .........................................................................178Dumpmaster Bin Tipper ..................................................................136-138

EEconolift ............................................................................41Electric Hoists ............................................................................76Electric Lift Navigator ..........................................................................103Electric Lifters ............................................................................51Electrodrive Products ......................................................................84-89Elevators Warehouse ............................................................................75Emergency Showers ..........................................................................219Expanding Conveyors ......................................................................72-74Eyewash Station .........................................................................219EZE Loader Pallet Positioner ...........................................................................49

FFencing ..................................................................180-183Fibreglass Ladders.............................................................111 Platform Ladders........................................109,110Flammable Goods Stores........................................................220-225Floor Safety Signs .........................................................................185Foot Operated Lid Lifter .........................................................................128Forklift attachments Bin Tippers……………………………...129-133 Bulk-A-Bag Lifting Frame....................................56 Container Ramp...................................................56 Drum Lifting...............................................201-203 Drum Rotators...................................................201 Fork Slippers.......................................................59 Jib Attachments.........................................55,57,58 Roll Prong/Probe Attachment...............................59 Safety Cage/Work Platforms................................60 Tip-up Bins................................................130-133

Page 28: Containment bunds • Spill Control • Emergency wash ... · Accumulation Centre for containment storage of small containers up to 20 litre drums Satellite Collection Site for Recyclables

Forklift LPG Stores .........................................................................226Forkliftable Tool Boxes ..................................................................141-143Funnels ..................................................................207,215Furniture Dolley...................................................................21 Hand Trucks.........................................................20

GGas Cylinder Storage ..........................................................................226Gas Cylinder Trolleys .......................................................................19,40Gyprock Lifter ............................................................................51Gzunda ............................................................................68

HHallins Electric Lifter ............................................................................42Heavy Duty Cabinets ...................................................................169,170High Density Storage ...................................................................148,149Hi-Lift Pallet Trucks ............................................................................46Hoists Electric……………………………………….76Hook Kits ..................................................................154-159Housekeeping Carts ...........................................................................14Hyloader Minilift ............................................................................41Hyloader Multilift ............................................................................43

IIBC Containment Units ...................................................................205,208Industrial Cupboards ....................................................151,153,164-172Instrument Cart ............................................................................12I.T. Workbenches ..........................................................................173

JJib Attachments ………………………………………...55,57,58Jumbo Ruxxac Cart ...........................................................................17Jumbo Step ...........................................................................99

K

LLaboratory Scales ..........................................................................191Ladders Aluminium Extension.........................................112 Fibreglass...................................................109-111 Lift Table.....................................................102,103 Mezzanine Access............................................. 104 Mobile/ Platform.........................................100-110 Navigator Series......................................... 101,103 Professional Contractor......................................112 Safety Step..........................................................99 Step Thru Type...................................................104 Trolleys................................................................23 Winch Truck………………………………….102Lead Restraints …………………………………………185,186Library Trolleys …………………………………………….......6Lift Tables (Mobile) …………………………………………...39-43Lifting Clamps/Drums ……………………………………………...195Linefeed Trolleys …………………………………………150,163Linen Trolleys ………………………………………...14,24,25Load Roller ……………………………………………21,35Load Skates ……………………………………………….35Long Span Shelving ……………………………………………...178Louvre Panels Bins/Plastic………………………………......121 Mobile Racks/Trolleys…………..........121,150,163

MMagliner Dual Purpose Hand Trucks…………………......17 Hand Trucks……………………………......17,18Magnetic Lifter ……………………………………………….54Mail Trolleys ……………………………………………..9,10Mandatory Signs ……………………………………………...187Manifest Cabinet ……………………………………………...187Matting ………………………………………....188-190Mega Bin ……………………………………………...125Mega Dumper ……………………………………………...138Mezzalad Access Ladder ……………………………………………...104Mini Pallets ……………………………………………...125Minimax Scaffolding ……………………………………………...108Multi Deck Trolleys ………………………………...3-6,8,9,11,12-16

Multi Media Trolley ………………………………………………...6My-T-Lift ……………………………………………….76

NNavigator Ladders ……………………………….................101,103Nipper Reacher ……………………………………………...128Non Metallic Safety Cans …………………………………………212,213

OOffice Trolleys ………………………………………….....3-10Oily Waste Can ……………………………………………...214Order Picking Trolleys …………………………………………….....23Oxy Acetylene Stores ……………………………………………...226Oxy Handtruck ……………………………………………….19

PPacking Bench ………………………………...146,147,178,179Paldisc Turntable ……………………………………………….50Palift ……………………………………………….50Pallet Bins ……………………………………………...125Pallet Eze Loader ……………………………………………….49Pallet Hook ……………………………………………….54Pallet Scales ……………………………………………...191Pallets Mini……………………………………….....125 Plastic…………………………………….....125Pallet Positioners ……………………………………………49,50Pallet Racking ……………………………………………...179Pallet Trucks High Lift………………………………………46 Galvanised………………………………….....44 Powered………………………………………46 Stainless Steel………………………………...44 Standard…………………………………........44 Sturgo………………………………………...44 Weigh Scales ………………………………. ..44Pallet Turntables …………………………………………....49,50Palring Turntable ……………………………………………….49Partitions ………………………………………....160-163Parts Bins ……………………………………………...158Pelican Tippers …………………………………………132,133Perforated Panels ……………………………………………...154Piano Trolley ……………………………………………….21Plastic Bins/Containers…………………......115-125,158 Buckets……………………………………...119 Crates…………………………………..115-118 Pallets……………………………………….125Plastic Trolleys/Carts ………………………………………………..7Platform Stackers …………………………………………...39-43Platform Trolleys …………………………………...3-5,7,8,11-15Plunger Cans ……………………………………………...213Porta Lift ……………………………………………….42Portable Lifter ……………………………………………….51Power Lead Restraints …………………………………………185,186Powerlift Trolleys ……………………………………………….38Powrsafe ……………………………………………...185Prestar Series Trolleys …………………………………………....3-5,7Procart ……………………………………………….13Projector Trolley ………………………………………………...6Pushmate Powered Trolley ………………………………………………...7Pushmate ……………………………………………..7,89

QQuik-Stak Lift/Stackers ……………………………………………….48

RRacking …………………………………………178,179Refuse Bins Bin Lifters……………………………….127-128 Foot Operated…………………………….......128 Hood Bin Lids……………………………......127 Mobile……………………………………….127Relocatable Dangerous Goods Stores …………………………………………224,225Rim Grip Drum Lifter ……………………………………………...200Rinse Tanks ……………………………………………...213Rising Base Trolleys ……………………………………………24,25Rubber Matting ………………………………………....188-190Ruxxac Handtrucks/Trolleys ……………………………………………….17

29 Yampi Way, Willetton, W.A. 6155 PO Box 243, Willetton, Western Australia 6955

Telephone: (08) 9354 9111 Fax : (08) 9354 9110Email: [email protected]

Website: www.backsafe-australia.com.au

Page 29: Containment bunds • Spill Control • Emergency wash ... · Accumulation Centre for containment storage of small containers up to 20 litre drums Satellite Collection Site for Recyclables

SSack Trucks ……………………………………………….20Safety Cages ……………………………………………….60Safety Cans ………………………………………....211-215Safety Steps ……………………………………………….99Scaffolding Systems ……………………………………………...108Scales Bench Scale…………………………….191-193 Counting………………………………..191-193 Pallet Truck…………………………………....44 Platform………………………………...191-193 Weighing………………………………..191-193Scissor Lifts Electric………………………………....38,52,53 Manual…………………………………….36,37Shadow Boards …………………………………………160-161Shelving ……………………………… .151-153,165-173Signs/Signage …………………………………………185,187Skates, Load ……………………………………………….35Skid Lifters ……………………………………………….45Skid Tilters ……………………………………………….45Slotted Panel ……………………………………………...158Speed Humps ……………………………………………...185Spill Accumulation Centre …………………………………………206,210Spill Containment Caddy …………………………………………206,209Spill Control Funnels …………………………………………207,215Spill Control Pallets ………………………………………....205-210Spill Response Kits ……………………………………………...218Stackers Powered…………………………………...47,48 Quickstak……………………………………..48Stainless Steel Benches.......…………………………..15,16,177 Cabinet/Cupboards…....……………………...177 Instrument Trolley……………………………..15 Linen Trolley………………………………......15 Pallet Trucks…………………………………..44 Preparation Tables…………………………...177 Service Trolley………………………………...15 Trolleys……………………………………...177Standing Aids ……………………………………………...175Stationery Cupboards ……………………………………………...152Step On Bins ……………………………………………….99Step Safe ……………………………………………….99Step Thru Tracker ……………………………………………...104Stock Trolleys ……………………………………………….22Stockpicking Trolleys ……………………………………………….23Storage Cabinets …………………….....148,149,151-153,164-172Sturgo Pallet Trucks ……………………………………………….44Sturgo Safety Step ……………………………………………….99Sturgo Trolleys ………………………………………………...8Super Trucks …………………………………………..24,124Swing Signs ……………………………………………...187

TTable Trolley …………………………………………….....21Tanks Plastic……………………………………….123Task Chairs ……………………………………………...176Tool Boxes ………………………………………....141-143Tool Cabinets …………………………………….164,171,172Tool Holders ………………………………………....154-159Tool Trolleys …………………………………….146,148,149Tracker Ladder …………………………………………….. 100Tracker Step Thru ……………………………………………...104Trades Cart 2000 …………………………………………….....12Traffic Cones ……………………………………………...186Trolleys Aluminium Folding…………………………….17 Aluminium Platform…………………………....22 Audio Visual………………………………….....6 Beverage……………………………………...20 Bin (H/Duty)…………………………….....24,124 Caged Type………………….........3-6,8-11,23,25 Castors……………………………………26-32 Chair………………………………………….18 Cylinder…………………………………....15,40 Drum Handling………………….......206,207,209 Food Services……………………………...14-16 Hand Trucks………………………….....17,18,20 Hospitality……………………………........14-16

Hotel/Housekeepers……………………….......14 Ladder Access………………………………...23 Library…………………………………………6 Linen…………………………………...14,24,25 Multi Media…………………………………….6 Multi Tie…………………...............3-6,8,9,11-16 Office & Mail………………………………..3-10 Order Picking……………………………....11,23 Oxy/Gas…………………………………....15,40 Piano………………………………………….21 Platform………………………........3-5,7,8,11,15 Powered Cart………………………………….87 Projector……………………………………….6 Pushmate Powered……………………….....7,89 Safebin……………………………………….39 Scissor Lift Electric………………….......38,52,53 Scissor Lift Manual………………………....36,37 Solicitors’……………………………………..22 Stainless Steel……………………………..15,16 Stock…………………………………………22 Sturgo………………………………………….8 Table………………………………………….21 Tub…………………………………………...24 Wire Basket…………………………………...10Tuff Boxes ………………………………………....141-143Tug (Electric) Classic………………………………………..85 Mini…………………………………………..84 Tough………………………………………....86

UUnivator ……………………………………………….41Utility Bins ……………………………………………...122Utility Carts ……………………………………………13,14

VVacuum Lifter …………………………………………...93-96Vertical Drawer Cabinets …………………………………………171,172Vital Chain Blocks ……………………………………………….77Vital Lever Blocks ……………………………………………….77

WWalkie Stackers ………………………………………..39-43, 46Warehouse Elevators ……………………………………………….75Warehouse Ladders ………………………………………....100-108Warehouse Trolleys ……………………………………………….11Warning Signs ……………………………………………...187Wash Tanks ……………………………………………...213Waste Bins…………………………...127,128, 130-133 Bin System……………………………………89 Cans………………………………………...214 Dumpmaster Tipper……………………..136-138Weighing Equipment ………………………………………....191-193Werks Cabinets ………………………………………....164-172Wheelie Bin Tippers …………………………………….129,134-138Wheelie Bins …………………………………………127,128Wheels & Castors …………………………………………...26-32Winch Lift Tables ………………………………………...40,42,43Winches ………………………………………………78Wire Basket Trolleys …………………………………………….....10Work Benches …………………………...144-150,168,177-179Work Platform ……………………………………………….60Workshop Cabinets ……………………..................148-151,153-172Workstations ………………………….144-150, 168, 173, 178Worktainer ……………………………………………….11

XXtra Utility Cart ……………………………………………….14

29 Yampi Way, Willetton, W.A. 6155 PO Box 243, Willetton, Western Australia 6955

Telephone: (08) 9354 9111 Fax : (08) 9354 9110Email: [email protected]

Website: www.backsafe-australia.com.au