broadband setup netgear dm11psp - clubtelco · broadband setup netgear dm11pspbroadband setup...

Broadband SetupNetgear DM11PSP

Broadband Setup Netgear DM11PSP

Modem Light Status

On the front of your modem you will notice a number of lights, the below table explains what each of these lights mean:

Label Action Description

[A] Power Off Power is off Solid Red Modem is initialising Solid Green Power is on

[B] Ethernet Off No Ethernet connection Solid Green Connected via Ethernet Blinking Green Data flow

[C] DSL Off No DSL signal Solid Green DSL signal established Blinking Green Establishing DSL signal

[D] Internet Off No internet connection Solid Green Internet is connected Blinking Green Data flow

[A]

[B]

[C]

[D]

Modem Reference Guide


Requirements

1. Any operating system is compatible however, depending on the version this may affect your internet experience.

2. Internet Explorer 6.0 or higher/Firefox 2.0 or higher.

3. Ethernet network adapter.

Connecting the DM111PSP to your computer

1. Connect your network cable to the yellow port located at the back of the modem, and the other end will connect to your computer.

2. Connect a telephone cable to the grey port at the back of the modem, and connect the other end to your telephone wall socket.

3. Finally, connect the power cable to your modem and the power adapter to your power point. Press the power button to the “ON” state.

The diagram below shows how the modem connects physically to your phone line, computer and power point.

4. Now that the modem is connected to your computer, phone line and powered on, you need to ensure that the lights on the modem indicate the following:

Label Action

Power Solid Green

Ethernet Solid or Blinking Green

DSL Solid Green

Internet Off

ComputerTelephone socket Power point

Setting StartedGetting Started (Cont.)

Broadband Setup Netgear DM11PSPBroadband Setup Netgear DM11PSP

You will also see a network icon appear in your task bar. You are now ready to setup your ClubTelco Internet connection. The image below shows the message box which should appear once the modem is connected and powered on.

Connecting Filters

Connecting a Central or Splitter Filter

This filter is used when you need to plug a phone and the ADSL modem in the same telephone wall socket.

There are 3 ports on the central filter as follows:

Line – This port connects to your telephone wall socket. ADSL – This port connects to the ADSL modem’s grey port. Phone – This port connects to a telephone or other telephone device (for example a

fax machine).

From diagram(1.1) below you can see the splitter (micro) filter acts as a double adapter and filter.

Connecting an Inline Filter

This filter is used on all phones, fax lines, etc.

An inline filter is placed between the telephony device and the telephone wall socket and should never be installed on the ADSL modem’s phone cable/connection.

Diagram (1.2) below shows that the inline filter only connects to your telephony devices.

Diagram (1.1) Diagram (1.2)

Home Phone

Telephone Wall Socket

Modem

Micro filter

Phone Jack

ADSL Jack

Telephone Wall Socket

Home Phone

Modem

Microfilter

Phone Jack

Configuring Your Modem


Logging into your Modem

1. Open a web browser (usually Internet explorer) and in the address bar enter: http://192.168.0.1

2. You will be asked for a username and password, simply enter the follow details:

Username: admin Password: password

As pictured below you can see once the modem address (http://192.168.0.1) has been entered the login page will automatically appear.

Setting up your ClubTelco ADSL Broadband connection

1. Once you have logged into your modem on the left hand side of the screen click on ADSL Settings.

2. Under the heading ADSL Settings enter the follow settings:

• VPI: 8 • VCI: 35 • Protocol: PPPoE Bridging • Multiplexing Method: LLC BASED • PPP Username: Simply enter your ClubTelco username but much like your email address, for

example; [email protected]

Configuring Your Modem (Cont.)


3. Now click on the button labeled Apply located at the bottom of the page. Your modem will now save your settings.

4. Once the settings have saved you should see a Restart Now button appear on the same screen in the bottom left hand corner. Simply click on this and wait for the modem to reboot itself.

5. Once your modem has restarted, you should automatically connect to ClubTelco’s Internet service (this can take up to 5 minutes). If you can see the internet light is now solid green try browsing to a website such as www.google.com.au to test your connection.

Setting Up Wireless

[email protected]


• PPP Password: Enter the password you’ve selected at sign-up • Disconnect if no activity (In minutes): 0

3. Now click on the button labeled Apply located at the bottom of the page. Your modem will now save your settings.

4. Once the settings have saved you should see a Restart Now button appear on the same screen in the bottom left hand corner. Simply click on this and wait for the modem to reboot itself.

5. Once your modem has restarted, you should automatically connect to ClubTelco’s Internet service (this can take up to 5 minutes). If you can see the internet light is now solid green try browsing to a website such as www.google.com.au to test your connection.

Email Setup

To check your ClubTelco email account you can go to http://www.clubtelco.com/support.html and under the Login section in the upper left hand side enter your username and password then click the Webmail button.

Alternatively if you wish to setup your ClubTelco email address on your computer please go to: http://www.clubtelco.com/support.html and under the Email heading in Self Service select

Email Setup Guides and the mail client you are using.

Homepage setup

1. If you wish to setup your Homepage simply open Internet Explorer and select Tools from the menu selection at the top, and click on Internet Options.

2. Within Internet Options under the General tab click in the address bar below the Homepage heading and enter http://www.clubtelco.com or the website of your choice. Click OK to complete the setup.

FAQ & Troubleshooting Tips

http://www.clubtelco.com


Call 13 TELCO (13 8352)Between 9am - 10pm Monday to FridayBetween 8am - 4pm Saturday & Sunday

Email: [email protected]

broadband setup netgear dm11psp - clubtelco · broadband setup netgear dm11pspbroadband setup...

Documents