read image

FRP / GRP CABLE LADDERS, TRAYS AND SUPPORT SYSTEM

Being first is good, being smart is better, being both is Simply the Best!

2

THE PERFECT PARTNER FOR YOUR PROJECTS!

Simply the Best: This statement has followed us over the years as we developed into the unprecedented market leader in

multidiscipline support systems. Since 1977, this experience in smart cable supporting has driven us to new

levels with many new and exciting products and projects. We have seen a major increase in our Research &

Development quality due to many different projects and special requirements from our clients.

A complete FRP system: We listen to our customers. With this in mind plus the demand for new

creative and unique products that last longer, reduce installation time and costly maintenance, we have

developed a range of FRP / GRP cable ladders, trays and supports that you can install our Trefoil Cleat,

ETIN tubing clamps as well as other time saving accessories.

Total supplier: As a total supplier of cable management and multidiscipline support systems and of all types of

materials, with worldwide references, our recommendations are trustworthy and focused.

You can be confident that when you are next in the market for a non-metallic support system, Oglaend System

FRP ladder, tray and support will be your best choice for value, ease of installation and technical quality.

Our main factory and headquarters in Norway (left) and our factory in Malaysia (right).

Below is our fabrication facility in Malaysia where the FRP systems are engineered and fabricated in large scale.

Our unique FRP design: We have designed our FRP system based on the same concept that made us the

unprecedented market leader, supplying to the Oil and Gas Industry in the North Sea shelf over 3 decades.

This environment represents one of the harshest test conditions possible. Our cable management systems have

passed the test of time and documented installations serve as our reference, can be found at major Oil and

Petrochemical companies around the world. This is why our FRP system is Simply the Best!

products in this edition:

9

3

NEW!NEW!

Page 10for moreinformation

Oglaend System has developed new extreme low smoke & toxicity Phenolic resin systems which was designed to meet the high standards set by the United States Coast Guard (USCG) and Marine Equipment Directive (MarED) where products can be used in all areas and applications offshore.

Oglaend has been accredited the following standard/approval

United States Coast Guard (USCG) under new Fire Test Procedure (FTP) codes: · IMO Resolution MSC.307 (88) Annex 1, Part 5· IMO Resolution MSC.307 (88) Annex 1, Part 2

Marine Equipment Directive (MarED) which states that the products are universally acceptable across Europe under the “Wheelmark” marking.

Oglaend System offers ABS rated product under 2009 Steel Vessels Rules 1-1-4/7.7, 4-8-4/21.9.4(d) & (e), 4-8-4 Appendix 1.

FRP fromOglaend Industries Malaysiawww.oglaend-system.com

Contents: Page

A new generation FRP in the market 4

The Pultrusion Process 4

From Concept to Installation 5

Oglaend System Advantages Preslotted Trays and Ladder Rungs, The Noni Principle, Patented Locking Rung, Self-Lock Vibration Proof Fasteners 6

FRP Product Features 8

Product Speci�cations for FOE & FTE Ladder and Tray 8

Project References 11

Cable Ladder type FOE Elbows, Covers, Dividers, Splice Connectors, Risers, Drilling Jig and Accessories. 12

Cable Tray type FTE with Elbows, Risers, Covers, Dividers, Splice Connectors, Drilling Jig and Accessories 24

Loading Data 30

Support System in FRP Central & Cantilever Supports, SpliceConnectors, Drilling Jig and much more 31

MultiGrid™ Installation Guide 32

FRP Support Channels 35

Special Screws for FRP Products 42

Accessories Screws, Nuts and Bolts 43

Chemical Exposure Chart 44

Installation, Storage & Handling Guide 45

Oglaend System main Catalogues 46

Worldwide Locations 47

MultiGrid™ FRP Support System Electro / Instrument / Telecom MultiGrid™ FRP Support SystemElectro / Instrument / Telecom

Discipline guide:

E, I & T

MultiGrid™

Page 12

Page 20

Page 20

Page 20

DESIGN TOOLSOglaend FRP products are available in

the following design tools AVEVA PDMS and INTERGRAPH PDS. Designers and

engineers please contact Oglaend System at www.oglaend-system.com

Cable Ladder FOE 70

Cable Ladder Cover HD Cover Fixing Clamp

Cantilever Wall Brackets

HD FlexiFixing Clamp

HIGHLIGHTS Page

Russian Fire and Extreme Climate Condition Cert. 8 Updated Project List 11 FRP Step Down Splice Connector 22 New Loading Data for IEC and Nema 29

NEW!NEW!

4

OUR FRP PRODUCT LINE A new generation in the market

When we designed this new cable management and multidiscipline support system we had one thing in mind:

To be Simply the Best, in FRP products. With over 30 years experience as the world leader in the supply of cable

support systems, we had evaluated market trends, customer requirements, designs and cost factors.

With all these factors in mind, we have created a full range of products that are user-friendly and cost-efficient

with a unique high strength solution in today’s market. Combined with creative user-friendly fittings and smart

accessories you can see why Oglaend System is Simply the Best!

Gunnstein Austigard, the founder of Oglaend System, is at the helm of the concept and designs again.

He is here seen on the left participating with Fraser Campbell, Managing Director of our Malaysian manufacturing operation planning and designing our new range of FRP.

Arne Gya and Stian Knudsen in the R&D department on the right.

Pultrusion is a continuous process of roving or mat/roving bundles, which are drawn through a resin impregnated bath to coat each fiber with a specially formulated resin mixture. The impregnated fibers are then drawn through a heated die which forms the desired cross section. Curing of the thermosetting resin is initiated by heat in the die and catalyst in the resin. The rate of reaction is controlled by heating the die. The resulting high uni-directional strength profile is cut to length and ready to be used in the Oglaend System FRP Cable Management and Multidiscipline Support system.

The pultrusion process overviewRoving

Resin bath

Continuous mats and surface veil

Pre-molding and finish-molding

PullingCutting

Process controlHeated die

5

Patents and design applications.Many of Oglaend System´s products are patented or protected by design applications.

Subject to minor changes without notice.Check our website for latest issues.

The British Gas Tapti-project site where FOE-150 standard cable ladders were installed, including some special designed solutions to complete the client´s tasks.

FROM CONCEPT TO INSTALLATION

Our standard riser using 45° splice angle plate.

See our riser buildingprinciples using 22.5°, 30° and 45° splice angle plates on page 17 and standard risers on page 19. The vertical hinge allows

free adjustments in steps of 4°. See both page 6 and 16.

Study the various fixing clamps on page 22.

Standard Tees are easily assembled in any combination of widths need.

Simply the Best: Encouraged by the market response towards our new line of FRP products which took one year from concept to

installation, Oglaend System secured the first of many large orders in 2006, one being British Gas Tapti.

Right from the beginning, the client and EPC contractor could clearly identify numerous benefits, not only

cost-wise, but more importantly from the engineering/installation angle, its limited space and flexibility requirement

was the key to a successful installation. BG Tapti used Oglaend System’s FOE150 heavy duty ladder and most of

the unique Oglaend System accessories. Some of these items can be seen below.

With smart solutions from Oglaend System, you can reduce cost and aid installation. Together with our satisfied

customers, our engineering/design team has developed a well-known technology into Simply the Best!

For pultruded products there is no difference between FRP and GRP.

6

The ADVANTAGES of Oglaend System FRP Products

Our anti-vibration locking system and our patented SmartLok P composite insert which is heat resistant, fire retardant and halogen free, means no mess, no fuss, no glue; just a quick, clean and simple installation. We are confident that if you use this system, you will see the advantages for yourself.

Preslotted Trays and Ladder Rungs

Trim-Edge.Used to prevent cable snagging.

Cover Snap Lock for all FTE trays

Unique I beam design for better loading capacity and cross section stability.

The pre-slotted design eliminates costly and time consuming drilling and the channel type profile ensures that no liquid retention is possible. Ensuring a longer service life.

Trim-Edge. Restricts movement of ladder rung vertically and adds rigidity.

Our PATENTED channel with the trim-edge design, helps to reduce the risk of cables being snagged or cut, and prevents the rung from moving vertically during assembly.

This profile design of Oglaend System adds more overall structural rigidity than any other product in the market today.

The patented Noni principle 9/10-holes for hinges, connectors and risers.

Study ourSmart Jigs for easy splice connections

The combination of the holes give adjustment possibilities in 4° steps.

Page 22 for LaddersPage 28 for BendsPage 37 for Support

Reduce installation costs and time by: Longer spans between the supports. Snap on Lids. Flexible fitting. Quick locking anti-vibration nuts. Apply Oglaend System´s Smart technology.

4° steps

The pre-slotted design saves drilling time.Trefoil SmartCleat fits all ladders.

Flexi around every obstacle

ETIN tubing clamp fits all trays and ladders and can be easily snapped on.

FOE-70

FOE-100

FOE-150

Channel / Gusset plate T

TENSILE LOAD

Use Oglaend System’s self-locking flange nut when mounting splice plates to our FRP ladder or tray system. This prevents joints from loosening in case of vibration.

Ask for separate brochure or download at www.oglaend-system.com

FRP self-lock system includes vibration-proof bolt sets

7

Our patented SmartLok P rung insertWith its fire retardant, low smoke halogen free properties, this clip with its glass reinforced sides, fits neatly into the rung by simply squeezing the end of the clip together and pushed into the rung.

The clip is locked into place by the glass reinforced taps on each side, and the screw is then inserted through the channel into the clip, preventing any type of pull out.

Finally the trim-edge on the ladder profile will fix the rung in position and prevent any rung rollover when cables are pulled.

Tensile loading on Side Profile: FOE-150 NR LadderAlways striving to be Simply the Best, Oglaend System continuously improves its product wherever possible, and in recent tests our ladders achieved a point loading of over 480kgs with rung and SmartLok insert still intact and func-tional.

TRADITIONALThe nut is moveable during vibrations because of side wards thread gap.

OUR STANDARD:The nut is locked during vibrations because all thread contact stops side wards movement.

Self-Locking Screws with safe flange nuts

in SS

Stress distribution diagram

Self-Lock Nut

OrdinaryNut

1 2 3 76540

8

10

20

30

40

Loosening diagram - Junker vibration test

Self-Lock Nut

OrdinaryNut

10 20 30 706050400

80

4,5

9,0

13,6

18,1

90 110100

22,7

27,2

31,7

36,3

40,8

45,4

All metallock nut

Number of threads engaged

Stre

ss %

Time (seconds)

Pret

entio

n kN

Self Lock Nut

All metal Lock Nut

Standard Nut

Pre

tent

ion

kN

45.4

40.8

36.3

31.7

27.2

22.7

18.1

13.6

9.0

4.5

010 20 30 40 50 60 70 80 90 100 110

Time (seconds)

Vibration test diagram

INTERNATIONAL STANDARDSCable ladder and tray system should meet or exceed thefollowing test standards:

1. FRP LADDER AND TRAY SYSTEM SHALL CONFORM TO:

FIRE PERFORMANCESpread of Flame: BS 476 part 7 class l (Acrylic) BS 476 part 7 class l (Polyester) BS 476 part 7 class II (Polyester) IMO Res A.653 (16) Annex1: Part 5 EN 13823-1:2007 ASTM E 84 class l IEC 60092-101 GOST R 53313-2009Fire Propagation: BS 476 part 6 (Polyester)(Acrylic) ASTM-D 635Smoke & Toxicity: IMO Res MSC61 (67) EN ISO 11925-2:2010 BS6853:1999 panel test BS6853:1999 Annex B, B.1 IMO Res MSC.307 (88) Annex 1, Part 2

Self Extinguishing: UL94-VO Halogen Free: IEC60754-1

MECHANICAL PERFORMANCE

NEMA FG1 Loading FOE-70 = Nema ‘8A’ FOE-100 = Nema ‘12C’ FOE-150 GA = Nema ‘16B’ FOE-150 = Nema ‘20C’ IEC 61537

8

HIGH STRENGTH Higher strength than structural steel on a weight to weight ratio. ASTM D-638 / ASTM D-695.

IMPACT RESISTANT Returns to original position without any permanent deflection or distortion. ASTM D-256 / IEC 60068-2-75.

LIGHT WEIGHT FRP pultrusion is lightweight, average 15% to 20% that of steel products.

CORROSION RESISTANT Pultruded products are not susceptible to rusting, pealing nor flaking and are impervious to a broad range of corrosive elements.

NON-CONDUCTIVE Glass reinforced pultrusions have low thermal conductivity and are non-conductive. ASTM D-149 / ASTM D-495.

ELECTRO-MAGNETIC TRANSPARENCY Pultruded products are transparent to radio waves, microwaves and other electromagnetic frequencies.

DIMENSIONAL STABILITY The coefficient of thermal expansion of pultruded products are marginally less than steel and aluminum.

LOW TEMPERATURE FRP has excellent mechanical properties at low temperatures.

FIRE RETARDANCY All products used in the construction of ladders and trays are manufactured in accordance with ASTM-E84 class 1 & BS476 part 7 class l and ll. Self extinguishing to UL94 V-0 under test procedure ASTM-D 635.

ULTRAVIOLET STABILITY All pultruded products contained an ultraviolet inhibitor, this is further complimented with an external surface veil. ASTM D570 / BS 2782 M552A / ASTM G154.

WEIGHT AND SHIPPING Our versatile system is light weight and can be packed flat to reduce expensive shipping costs.

HALOGEN FREE Our products are Rated Zero Halogen according to IEC60754.

SURFACE & VOLUME CONDUCTIVITY Oglaend System has a full range of ladder and tray products that are conductive and tested in accordance to ASTM D-257.

Product Specification for FOE and FTE ladders & trays

FRP Product Features

Accelerating Aging: BS 2782 M552A ASTM G154 Water Absorption: ASTM D570 Impact Load: IEC 60068-2-75Barcol Hardness: ASTM D2583Tensile Stress: ASTM D638 Climate Test: GOST 15150-69, UHL(-60˚C)

ELECTRICAL PERFORMANCEVolume Resistivity: ASTM D257 Surface Resistivity: ASTM D257 Dielectric Strength: ASTM-D 149

OTHERSDensity: ASTM-D792

2. ULTRAVIOLET (UV) Pultruded products shall have an integral chemical additive to help to mitigate discoloration and a surface veil will help to prevent glass fiber exposure, thus maximizing total UV protection.

3. FLAME SPREADAll composite materials shall be fire retardant and have a flame spread rating in accordance with ASTM E-84 class I or BS476 part 7 class 0, l & II.

4. RESIN SYSTEM Colour Code1. ISO Polyester class l Code (C1) RAL 70402. ISO Polyester class ll Code (C2) RAL 70403. Vinyl ester Code (VE) RAL 70404. OLSTAR acrylic system Code (AC) Natural & Black 5. Phenolic Resin Code PH Brown

Our standard resin systems for ladders is C1 and trays are C1 & C2.

Tests and StandardsOur test database is continuously being improved, so please contact Oglaend System for our latest test data.

9

5. MATERIAL CONTENTa.Glassfibretoresinratioshallbemaintainedbetween 45%-65%byweightinallpultrudedcomponents.b.Flatsheetshallbe40%-50%

6. LADDER SIZESa.LadderHeights:70,100,150mm.b.LadderWidths:150to900mm.c.LadderLengths:3m&6m.d.RungSpacingis300mm(othersizesavailable).e.RadiusofFittings:300mmisstandard. 600&900onrequest.Fittingsshallbemiteredtype.d.Nomoldedorpressedfittingareacceptableasthey wouldnotcomplywithloadingspecification.e. All ladder rungs are perforated as standard.

7. CABLE TRAY SIZESa.Widths:50,100,150,200,300,400&600mm.Forsizesgreaterthan400mmcontactOglaendSystem.b.Depths:50and80mmrespectively.c. Tray covers are self-locking and clip-on type.d.Alltrayswillbeperforatedat300mmcenters.e.RadiusofFittings:250mmisstandard. 8. LOADING REQUIREMENTSa.TherearethreeworkingloadclassificationsforFRPcableladderbasedon(20’)supportspanswithaminimumsafetyfactorof1.5.

Class Working Load (Nema) A 50Lbs./LinealFtor (74kgs/m)B 75Lbs./LinealFtor (111kgs/m)C 100Lbs./LinealFtor (148kgs/m)

b.Spansupportcriteriashallbespecified(refertothefollowingtable).

Support Span(Ft.) WorkingLoadinLbs./LinealFt. Class A Class B Class C

20 50(74kgs/m) 75(111kgs/m) 100(148kgs/m) 18 61 92 123 16 78 117 156 14 100 150 200 12 139 208 - 10 200 - -

*IndependenttestreportsarerequiredtosubstantiateNEMAFG1loadcriteria.

9. IEC LOADING Oglaend System offers a range of ladder and tray products thatareIEC61537certifiedbyDNVwhichoffersaSafeWorkingLoadx1.7.Contactusformoreinformation.

10. CONNECTOR PLATES AND FASTENERSa.SpliceplatesareinStainlessSteelAISI316LorinFRP designedwithsufficientstrengthtosuitallapplications.b.ANTIVIBRATIONSOLUTION.Allspliceplatesare

a

b

«b» is described in detail on

page7.

attachedtotheFRPladderandtrayusingthe Oglaend System self-locking bolt and safety nut.c.Fastenersforladdersare10mmdiameterforsplice platesand8mmfortherungfixingdetail.d. Fasteners for trays are 6mm diameter.

11. PHYSICAL PROPERTIESStraightLaddersectionshallbepultrudedglassreinforcedwithapremiumresinsystem:a. Our ladder and tray members aredesignedspecificallyto optimizetheloadcapacityin theformofabeamsection. ThisUNIQUEstylehastwo importantadvantages,the firstbeingthewayoursplice platefitsflushandtightly betweentheflanges(see detail“a”)thuspreventingthe plate from slipping at time of installation.Theotherisourpatentedrungtoladder attachmentwheretherungfitsneatlybetweentwoflanges andlockedusingourpatentedinsert(seedetail«b»).b.Rungtosiderailmemberconnectionsshallbeconnected byafireretardant(UL94VOhalogenfree)composite lockingclip.Therungtosiderailmechanicalconnection shallresistbothverticalshearandrungpullout.c.Theheightoftherungis24mmtomaximizecable installations. d.AllRungshaveperforationsalongthelengthtoaideasy installation of cables.e. All sections are able to use Oglaend System ETIN tubing clampandTREFOILSmartCleatsandotherfixing accessories.f. Straightsectionsofladderandtrayarepre-drilledto accept connector plates.g.Allcutendsanddrilledspliceplateholesaresealed prior to goods leaving factory.

12. ANTI STATIC – ASTM D257AllproductscanbesuppliedwithAntiStaticPropertiesrangingfromSurfaceresistivity106to1010.ForVolumeResistivity105contactOglaendSystemforfurtherdetails.

13. RESISTANCE TO ENVIRONMENTAL FACTORSCompositesdisplayexcellentresistancetothecorrosive effectsoffreeze-thawbecausecompositesarenotattackedbygalvaniccorrosionandhavelowwaterabsorption,theyresistthedestructiveexpansionoffreezingwater.

14. EARTHINGEarthingorBondingjumpersareNOTrequiredonstandardnonconductiveladdersortrays.Theyareonlyrequiredwhenusingconductiveladdersortraysoruponcustomer’srequest.

Suggestedinstalldistanceforbondingjumpersis18m(60ft).

10

15. RESIN SYSTEMS maximizing performance to meet application. When choosing a resin system for your application, it is always best to discuss your application with us as each installation can be very different in terms of chemical, smoke & toxicity requirements.

Below is an overview of our current systems:Polyester (Halogen Free) This resin is the most widely used resin systems. It offers good weathering properties with resistance to ultra-violet light and has good corrosion resistance. The resin can also be formulated to meet specific fire and smoke standards and can be supplied with conductive properties.

Vinyl Ester Offers a better corrosion and heat resistance to our polyester resin. Used widely in heavy chemical or caustic applications.

OLSTAR Acrylic low smoke and toxicity This resin is suitable for projects that require ABS certification under current rules or require low smoke and toxicity properties. This product is widely used in enclosed areas, mass transit and tunnel application. This system is available in two formulations, ABS or standard AC. PHENOLIC Extreme low smoke and toxicity This high performance resin is at the forefront of cable management in terms of smoke and toxicity performance. This product complies to the latest USCG and MarED requirement and can be used in all areas offshore. Benefits of this system:

PHENOLIC Features– Extreme low smoke and toxicity in every condition– High strength and stiffness – Excellent impact resistance.– Fire performance is unrivalled– Increased protection to cables from a fire source.– High oxygen index above (75)

Where Fire, Smoke and Toxicity (FST) performance properties are required - Phenolic resin is the material of choice for your application.

16. THIRD PARTY APPROVALApproved to supply FRP/GRP products to the European Union States under the Wheel Mark logo, MARINE EQUIPMENT DIRECTIVE (MarED) and SOLAS Regulations II-2/3.40.4, II-2/5.3.2.4 and II-2/6.2. Approved to supply FRP/GRP products to the United States Coast Guard (USCG) under new Fire Test Procedure (FTP) codes:

· IMO Resolution MSC.307 (88) Annex 1, Part 5· IMO Resolution MSC.307 (88) Annex 1, Part 2

ABS Rules2009 Steel Vessels Rules 1-1-4/7.7, 4-8-4/21.9.4(d) & (e), 4-8-4 Appendix 1.

17. INSTALLING CABLE LADDERS CORRECTLYStraights SectionsSupports must be located so that splice joints between horizontal runs sit between the support points and the quarter point of the span. Details as below:

18. PRODUCT DESIGN TOOLS Oglaend FRP products are available in the following design tools AVEVA PDMS and INTERGRAPH PDS. Designers and engineers please contact Oglaend System at www.oglaend-system.com

19. TEMPERATURE EFFECTThe Strength of FRP can be reduced when exposed to continued high temperatures. Loading shall be reduced based on the following. You should also consider the span or loading applied to products.

Temperatures Polyester Resin Vinyl Ester Resin in Degrees ˚F % of Strength % of Strength

75 100 100 100 90 100 125 78 100 150 68 90 175 60 90 200 52 75

Note: Percentage shown above is a guide. When high temperature conditions are present you should consult the manufacturer. Freezing temperatures does not affect the load rating of the ladders. FRP does not become fragile at freezing temperatures.Consideration is required when service temperatures are over 200˚F or 94˚C.

Support Location Guidelines

RESIN SYSTEMS & MATERIALFORMULATION GUIDE

Chemical Resistance

Fire Performance

Low Smoke

Low Toxicity

Conventional Resin

Conductive Resin

Exposure to High Temperatures10 = BestChart is based on Oglaend’s resin only

Infrastructure

Systems For Ship

Oil & Gas

Waste Water

11

OGLAEND SYSTEM PROJECT LIST FOR FRP

Adyard Indago Abu Dhabi FOE-150 Ladders, TraysAdyard Maersk Abu Dhabi FTE Trays-50-300 Tray FittingsArabian Falcon Adyard Abu Dhabi FTE TraysGulf Piping Offshore Abu Dhabi FOE-100 Ladders, FittingsMaersk General products Abu Dhabi FOE Ladders (Nema 20C)NPCC Maersk Abu Dhabi FOE Ladders and FTE and FTE Trays, Fittings (Nema 20C)Total CLOV FPSO Angola FOE 70, FTE 50Alfasi Desalination Plant Australia FOE 70Leonard Electrics State Aquatic Centre Australia FOE 70Downer EDI SSJV Desalination Plant Australia FOE 100 Ladder, Fittings HD SupportsDowner EDI SSJV Desalination Plant Phase 2 Australia FOE 100 Ladder, Fittings HD Supports Southern Cross Electrical Pigment plant upgrade Australia FOE 100 LadderVestas Wind Mill Various Windwill Park Australia Support ChannelsBP Accomodation Azerbaijan FOE-100 Ladder, FittingsBelWind Transformer Platform Belgium FOE Ladder, FTE Tray, FRP SupportLondon Array Transformer Platform Belgium FOE, FTE, FTE Antistatic, FRP SupportConoco Philips RUP Bohai Bay China FOE-150 Ladders and FittingsConoco Philips Well Head, D,E,F Bohai Bay China FOE-150 LaddersETS Track Boulevard Tunnel Denmark FOE-70 LaddersSemco Maritime Horns Rev 2 Accomodation Denmark FOE Ladders and FTE TraysVestas Wind Mill Various Windmill park Denmark Support ChannelsCopenhagen Zoo Artic Ring Denmark FOE 70BK Gulf Atlantis Dubai FOE-100 Ladders, FTE Trays & FittingsBK Gulf Palm Island Dubai FOE-100 Ladders, FittingsBK Gulf Palm Interchange Dubai FOE-100 Ladders, FittingsChalmers Tapti project Dubai FTE Trays & FittingsCumberland Electro Services DPE Fateh Dubai FTE TraysDanway Electrical DUBAL Dubai FTE Trays and FittingsDubai Petroleum General projects Dubai Various FTE TraysHydrolink AI Shaheen Dubai FTE TrayInnovative Technology Various project Dubai FTE TraysJR McDermott Maersk Dubai FOE Ladders and FTE Trays, Fittings (Nema 20C)Kaz Intertrade Oil & Gas Dubai FOE LaddersLamprell Various project Dubai Etin Clamps, FTE Trays, FOE LaddersLamprell Gulphino Dubai FTE TraysMetito Oil & Gas Dubai FTE TraysSBM FPSO Dubai FOE-150 Ladders (Nema 20C)SEMCO Maritime Various project Dubai All productsSuliman Petrotech Oil & Gas Dubai FTE TraysAlderley FZE Various project Dubai/UK FTE Trays, FittingsVestas Wind Mill Various Windmill Park Germany Support ChannelsBritish Gas India Tapti project India FOE 150 Ladders (Nema 20C)Aqua Treat Oil & Gas Jordan FTE TraysJV Inkai Petrochemical plate Kazakhstan FOE-150 Ladders and FittingsSime Darby Maersk Malaysia FOE Ladders and FTE Trays, Fittings (Nema 20C)Sime Darby Maersk Malaysia FOE-150 Ladders (Nema 16B)Sime Darby Kumang Cluster Malaysia FOE-150 Ladders, Fittings and FTE TraysLynas Lamps Up Malaysia FOE Ladders (Nema 20C)SMOE Zatwika Project Myamar FOE 150, FTE 50DONG Energy Transformer Platform Netherland FOE LaddersHemworthy Pazfloor FPSO Norway FTE TraySiemens Norsk Hydro Norway FOE Ladders, FTE Trays and FRP SupportAvinor Sola Airport Norway FOE 70, FTE 50, Support ChannelsCegelec New Doha Airport Qatar FOE-100 LaddersKentech Qatar Tachnical Services Qatargas II Qatar FTE TrayMaersk Project at Adyard Qatar FOE-150 Ladders and FTE Trays (Nema 20)Mw Kellog Shell Pearl Qatar FOE Ladders and FTE Trays (Nema 20C)Prochem Engineering Oil & Gas Qatar FOE LaddersQatar Aviation Fuels Jetty area Qatar FTE-150 LaddersQatar Kentz Qatargas Qatar FOE-150 LadderQatar Petroleum Jetty area Qatar FOE Ladders (Nema 20C)Washington Group International Qatargas Qatar FTE TrayQatar Gas Qatar Gas Modification Raslaffan Qatar FOE 150Cegelec New Doha Airport Qatar FOE 100, FTE 50Qatar gas Laffan Refinery Qatar FTE 50Acciona Infraestructura Adriatic LNG Spain FOE-100 Ladders, FittingsViny Thai Windmill, Chemical plant Thailand FRP TrayPTTEP Montara Thailand FRP Ladder TrayPTTEP Bongkot Thailand FRP/Ladder TrayPTTEP Arthit (Maintenance) Thailand FRP/Ladder TrayPearl Oil PPB2 Power System Thailand FRP/Ladder TrayPTTEP Montara Thailand FRP Ladder TrayPTTEP Bongkot (Maintenance) Thailand FRP/Ladder TrayPearl Oil PPB2 Power System Improvement Thailand FRP Ladder TrayPTTEP PTTEP Bundle Project Thailand FRP/Ladder TrayCPOC CPOC JKB Thailand FRP/Ladder TrayCPOC CPOC MDE Thailand FRP/Ladder TraySalamander Salamander B Thailand FRP/Ladder TrayPTTEP BC3 Thailand FRP/Ladder TrayDragon Oil Zhdanov A, Crane Vessel Turkmenistan FOE Ladders and FTE TraysAdma Opco Zadco Central Super Complex UAE FOE 150 GA, FTE 50Adma Opco Zadco Pressure Upgrade UAE FOE 150 GA, FTE 51Gasco Ruwais Jetty UAE FOE 150, FTE 50Dubai Petroleum Al Jalil Platform UAE FOE 150, FTE 50Adma Opco Potable Water Zirku Island UAE FTE 80Seatrax uk Al Shaheen UK FTE Trays for the cranes constructionAcciona Croydon Tunnels UK FTE-50 & FOE-100British Fuels Not available UK FTE Trays & FittingsFabricom Liverpool Dock UK FTE-50, FOE-100 & SupportsFarebrother Thorton Bio Waste UK FTE-50, FOE-150 & SupportsGoodwin & Price Birmingham Queensway UK FTE-80 & SupportsVestas Wind Mill Various WIndmill Park UK Support ChannelsLondon Array Offshore WIndmill UK Support ChannelsVung Ang FLSmith Coal Fire Thermal Power Plant Vietnam FOE 70

CLIENT PROJECT LOCATION PRODUCT

* A selection of projects completed between 2007 & July 2012.

12

CABLE LADDER FOE

3000 mmLoadingdepth H: 71

300

B

A100

3000 mm

300

BA

70

Loadingdepth H: 46Ladder supplied with

4 perforated and 6 un-perforated rungsas standard

Cable Ladder FOE-70 Nema 8A

For general industrial applications Type A (mm) C2 Art. no. Kg/mFOE-70 CL-150-3 168 73700 2.0FOE-70 CL-200-3 218 70300 2.1FOE-70 CL-300-3 318 73701 2.4FOE-70 CL-400-3 418 70301 2.6FOE-70 CL-450-3 468 73702 2.8FOE-70 CL-500-3 518 70302 3.0FOE-70 CL-600-3 618 73703 3.1Also available with closed rungs, for food process or other clean or wet room applications.FOE-70, related fitting and accessories are supplied in C2, otherresins are available on request. Longer lead times may apply.

Cable Ladder FOE-100 Nema 12CType A (mm) C1 Art. no. Kg/m

FOE-100 CL-150-3 176 74429 3.4FOE-100 CL-300-3 326 74430 3.8FOE-100 CL-450-3 476 74431 4.1FOE-100 CL-600-3 626 74432 4.5FOE-100 CL-750-3 776 74433 4.8FOE-100 CL-900-3 926 74434 5.2

FOE-100 CL-150-6 176 74746 3.4 FOE-100 CL-300-6 326 74747 3.8 FOE-100 CL-450-6 476 74748 4.1FOE-100 CL-600-6 626 74749 4.5FOE-100 CL-750-6 776 74750 4.8FOE-100 CL-900-6 926 74751 5.2

* OLSTAR acrylic system ABS approved with anti static properties

NOTE: For standard products just select the article number below.Loading: See page 30. Chemical Guide : See page 44.Ladder accessories: See page 13-23. Nuts and bolts: See page 42 and for full range 43.

GUIDELINES: To change resin system: Select resin code and add to article no.Example: Polyester Resin Class 2 = Art. no. 74429C2C1 = Standard, resin code not required.

4(8)M10x20

This symbol tells you that the product is supplied with stainless steel bolt sets and locking nut washers.(In brackets are optional).

Loading Depth Height

FOE-150 NR**

FOE-150 GA*

FOE-100

FOE-70

* General Application

** Nema Rated

150 mm

100

70

121 mm

71

46

Product selection and options FOE Ladder Range Standard Range Product Option on Request Resin Code

Material Polyester Class 1 (C1) a. Polyester Resin Class 2 C2 FOE-70, supplied standard in C2 b. OLSTAR system, low flame, smoke & toxicity resin* AC c. Vinyl ester VE d. Phenolic System PHLength 3m 6m (special sizes between 3 and 6m are possible )Width 150-900mm 1000-1200mm (only on selected products) Height 70,100 & 150 200mmRung Spacing 300mm 120-500mm Rung Attachment SmartLok® Stainless Steel BarrelLok (available on all ladder products) Assembly SS bolt sets with anti-vibration flange nut Splice Detail Full height SS/FRP splicing details Elbow Radius 300mm 450-600 & 900mm Angles 45˚ or 90˚ 30˚ or 60˚

Oglaend Cable Ladder System can be supplied with a stainless steel BarrelLok as an option. Contact Oglaend System for more details.

13

If you need assistance, please contact us!

Cable Ladder FOE-150 GA Nema 16B For general application Type A (mm) C1 Art. no. Kg/m

FOE-150 GA-CL-150-3 176 70264 4.9FOE-150 GA-CL-300-3 326 70265 5.2FOE-150 GA-CL-450-3 476 70266 5.6FOE-150 GA-CL-600-3 626 70267 6.0FOE-150 GA-CL-750-3 776 70268 6.3FOE-150 GA-CL-900-3 926 70269 6.7

Available in 6m section

FOE-150 GA �ttings just add GA to Art. no.

Cable Ladder FOE-150 Nema 20CType A (mm) C1 Art. no. Kg/m

FOE-150 CL-150-3 176 74437 6.3FOE-150 CL-300-3 326 74438 6.6FOE-150 CL-450-3 476 74439 7.0FOE-150 CL-600-3 626 74440 7.4FOE-150 CL-750-3 776 74441 7.7FOE-150 CL-900-3 926 74442 8.1

FOE-150 CL-150-6m 176 74752 6.3FOE-150 CL-300-6m 326 74753 6.6FOE-150 CL-450-6m 476 74754 7.0FOE-150 CL-600-6m 626 74755 7.4FOE-150 CL-750-6m 776 74756 7.7FOE-150 CL-900-6m 926 74757 8.1

Flat Elbows 90° R300 Available in 600 and 900 radius

Type C2 Art. no. Kg

FOE-70 FE-90-150-R3 73706 3.5FOE-70 FE-90-200-R3 70303 4.7FOE-70 FE-90-300-R3 73307 4.7FOE-70 FE-90-400-R3 70304 4.7FOE-70 FE-90-450-R3 73708 5.5FOE-70 FE-90-500-R3 73707 4.7FOE-70 FE-90-600-R3 73709 8.1

Type C1 Art. no. Kg

FOE-100 FE-90-150-R3 74606 4.4FOE-100 FE-90-300-R3 74607 5.7FOE-100 FE-90-450-R3 74608 6.6FOE-100 FE-90-600-R3 74609 7.5FOE-100 FE-90-750-R3 74610 8.5FOE-100 FE-90-900-R3 74611 9.4


448.5

R

CABLE LADDER FOE

Width

3000 mm

300

B

A150

Loadingdepth H: 121

3000 mm

300

B

A150

Loadingdepth H: 121

PTTEP Montara ADMA De-mothballing ADMA De-mothballing

Cross Available in 600 and 900 radius Type C2 Art. no. Kg

FOE-70 CR-150/150-R3 73724 5.1FOE-70 CR-200/200-R3 70311 6.4 FOE-70 CR-300/300-R3 73725 6.1FOE-70 CR-400/400-R3 70312 6.9 FOE-70 CR-450/450-R3 73726 7.4FOE-70 CR-500/500-R3 70313 6.5 FOE-70 CR-600/600-R3 73727 8.4

Tee-Piece Available in 600 and 900 radius Type C2 Art. no. Kg

FOE-70 TE-150/150-R3 73718 5.3FOE-70 TE-200/200-R3 70308 5.6 FOE-70 TE-300/300-R3 73719 6.2FOE-70 TE-400/400-R3 70309 7.0 FOE-70 TE-450/450-R3 73720 7.5FOE-70 TE-500/500-R3 70310 7.9 FOE-70 TE-600/600-R3 73721 8.5

14

Flat Elbows 45° R300 Available in 600 and 900 radius

Type C2 Art. no. Kg

FOE-70 FE-45-150-R3 73712 2.2FOE-70 FE-45-200-R3 70305 2.6FOE-70 FE-45-300-R3 73713 2.9FOE-70 FE-45-400-R3 70306 3.1FOE-70 FE-45-450-R3 73714 3.4FOE-70 FE-45-500-R3 70307 3.9 FOE-70 FE-45-600-R3 73715 4.8

CABLE LADDER FOE

467

193.5

Width

377Width

Width

437

437

437

Width

Width

Type C1 Art. no. Kg


Type C1 Art. no. Kg

FOE-100 TE-150/150-R3 74506 6.5FOE-100 TE-300/300-R3 74507 7.5FOE-100 TE-450/450-R3 74508 8.8FOE-100 TE-600/600-R3 74509 9.9FOE-100 TE-750/750-R3 74510 11.6FOE-100 TE-900/900-R3 74511 12.8

Type C1 Art. no. Kg

FOE-100 CR-150/150-R3 70314 6.5FOE-100 CR-300/300-R3 70315 7.5FOE-100 CR-450/450-R3 70316 8.8FOE-100 CR-600/600-R3 70317 9.9FOE-100 CR-750/750-R3 70318 11.6FOE-100 CR-900/900-R3 70319 12.8

Type C1 Art. no. Kg

FOE-150 TE-150/150-R3 74512 11.1FOE-150 TE-300/300-R3 74513 12.3FOE-150 TE-450/450-R3 74514 14.0FOE-150 TE-600/600-R3 74515 15.4FOE-150 TE-750/750-R3 74516 17.4FOE-150 TE-900/900-R3 74517 18.9

Type C1 Art. no. Kg


Type C1 Art. no. Kg

FOE-150 CR-150/150-R3 70320 11.1FOE-150 CR-300/300-R3 70321 12.3FOE-150 CR-450/450-R3 70322 14.0FOE-150 CR-600/600-R3 70323 15.4FOE-150 CR-750/750-R3 70324 17.4FOE-150 CR-900/900-R3 70325 18.8

15

Splice connectorseparate order

Reducer part iscomplete with screws and FRP brackets

4M10x20

4M10x20

Reducer Part Splice connector to be ordered separatelyType C2 Art. no. Kg

FOE-70 RP-150 73730 0.8FOE-70 RP-200 70326 0.9FOE-70 RP-300 73731 1.0FOE-70 RP-450 73732 1.1FOE-70 RP-500 73733 1.2

Type C1 Art. no. Kg



CABLE LADDER FOE

Reducer CentralType C1 Art. no. Kg

FOE-100 RE-300/150 70327 2.5FOE-100 RE-450/150 70328 2.6FOE-100 RE-600/150 70329 2.7FOE-100 RE-450/300 70330 2.7FOE-100 RE-600/300 70331 2.8FOE-100 RE-750/300 70332 2.9FOE-100 RE-900/300 71447 3.0FOE-100 RE-600/450 70333 2.9FOE-100 RE-750/450 70334 3.0FOE-100 RE-900/450 70335 3.2FOE-100 RE-750/600 70336 3.1FOE-100 RE-900/600 70337 3.3

Reducer Right Type C1 Art. no. Kg

FOE-100 RE-R-300/150 70371 2.3FOE-100 RE-R-450/150 70372 2.4FOE-100 RE-R-600/150 70373 2.5FOE-100 RE-R-450/300 70374 2.5FOE-100 RE-R-600/300 70375 2.6FOE-100 RE-R-750/300 70376 2.7FOE-100 RE-R-900/300 71449 2.8FOE-100 RE-R-600/450 70377 2.7FOE-100 RE-R-750/450 70378 2.8FOE-100 RE-R-900/450 70379 3.0FOE-100 RE-R-750/600 70380 2.9FOE-100 RE-R-900/600 70381 3.1

Type C1 Art. no. Kg

FOE-150 RE-R-300/150 70382 4.3FOE-150 RE-R-450/150 70383 4.4FOE-150 RE-R-600/150 70384 4.5FOE-150 RE-R-450/300 70385 4.5FOE-150 RE-R-600/300 70386 4.6FOE-150 RE-R-750/300 70387 4.7FOE-150 RE-R-900/300 71452 4.8 FOE-150 RE-R-600/450 70388 4.7FOE-150 RE-R-750/450 70389 4.8FOE-150 RE-R-900/450 70390 4.9FOE-150 RE-R-750/600 70391 4.9FOE-150 RE-R-900/600 70392 5.0

Type C1 Art. no. Kg

FOE-150 RE-L-300/150 70360 4.3FOE-150 RE-L-450/150 70361 4.4FOE-150 RE-L-600/150 70362 4.5FOE-150 RE-L-450/300 70363 4.5FOE-150 RE-L-600/300 70364 4.6FOE-150 RE-L-750/300 70365 4.7FOE-150 RE-L-900/300 71451 4.8FOE-150 RE-L-600/450 70366 4.7FOE-150 RE-L-750/450 70367 4.8FOE-150 RE-L-900/450 70368 4.9FOE-150 RE-L-750/600 70369 4.9FOE-150 RE-L-900/600 70370 5.0

Type C1 Art. no. Kg

FOE-150 RE-300/150 70338 4.7FOE-150 RE-450/150 70339 4.8FOE-150 RE-600/150 70340 4.9FOE-150 RE-450/300 70341 4.9FOE-150 RE-600/300 70342 5.0FOE-150 RE-750/300 70343 5.1FOE-150 RE-900/300 71450 5.2FOE-150 RE-600/450 70344 5.1FOE-150 RE-750/450 70345 5.2FOE-150 RE-900/450 70346 5.3FOE-150 RE-750/600 70347 5.3FOE-150 RE-900/600 70348 5.4

Reducer Left Type C1 Art. no. Kg

FOE-100 RE-L-300/150 70349 2.3FOE-100 RE-L-450/150 70350 2.4FOE-100 RE-L-600/150 70351 2.5FOE-100 RE-L-450/300 70352 2.5FOE-100 RE-L-600/300 70353 2.6FOE-100 RE-L-750/300 70354 2.7FOE-100 RE-L-900/300 71448 2.8FOE-100 RE-L-600/450 70355 2.7FOE-100 RE-L-750/450 70356 2.8FOE-100 RE-L-900/450 70357 3.0FOE-100 RE-L-750/600 70358 2.9FOE-100 RE-L-900/600 70359 3.1

Simple left/right

Reducer Part

4M6x16

4(8)M10x25

4(8)M10x25

16

4° steps

FRPSS

SS

Stainless steel equipped with the patented Noni principle with the combination of the 9/10 holes gives adjustment in steps of 4°.

Used as:

Splice Angle Bend by hand to required angle.

Composite bolt and nut sets are available on request.

6M10x20

4(8)M10x20

Flexi around every obstacle

Hinge Vertical for flexible riserType FRP Art. no. Kg SS Art. no. Kg

FOE-70 HV-SD 70402 0.2 74863 0.5FOE-100 HV-SD 75036 0.3 74864 0.6FOE-150 HV-SD 75037 0.6 74865 1.1

Various riser solutions are listed in subsequent pages.

CABLE LADDER FOE

2M4.8x13

150

Combine to �t actual width

4M6x16

Exit Plate Combine to fit actual width Type FRP Art. no. Kg

FOE EX-150 74545 0.4

End Cover Type FRP Art. no. Kg

FOE-70 EC-150 73735 0.1FOE-70 EC-200 70393 0.2FOE-70 EC-300 73736 0.2FOE-70 EC-400 70394 0.2FOE-70 EC-450 73737 0.3FOE-70 EC-500 70395 0.2FOE-70 EC-600 73738 0.4

FOE-100 EC-150 74701 0.1FOE-100 EC-300 74702 0.2FOE-100 EC-450 74703 0.3FOE-100 EC-600 74704 0.4FOE-100 EC-750 74705 0.5FOE-100 EC-900 74706 0.7

FOE-150 EC-150 74707 0.2FOE-150 EC-300 74708 0.3FOE-150 EC-450 74709 0.5FOE-150 EC-600 74710 0.6FOE-150 EC-750 74711 0.8FOE-150 EC-900 74712 0.9

Splice Connectors

Type FRP Art. no. Kg SS Art. no. Kg

FOE-70 SC 70396 0.2 70397 0.3FOE-100 SC 75051 0.3 74858 0.4FOE-150 SC 75045 0.5 74859 0.6

Spans up to 4m, 4 bolt sets are recommended.Spans above 4m, 8 bolt sets are recommended.

Splice Angle Horizontal /Expansion coupler in SSType FRP Art. no. Kg SS Art. no. Kg

FOE-70 SA-HO 70398 0.2 70399 0.3FOE-100 SA-HO 70400 0.3 74861 0.4FOE-150 SA-HO 70401 0.5 74862 0.6

When used as expansion coupler remember to:• Use bolts with “nylock” lock nuts in the 4x rectangular slotting and do not tighten the nuts. • Place one coupler for approx 25m span to count for thermal expansion.

4 bolt sets included as standard

(8) bolt setsare optional

5M10x25

If you use two different ladders or tray heights, Oglaend System offers Step Down splice plates which

can be supplied upon request.

17

Riser Part

Type C2 Art. no. Kg

FOE-70 RI-PA-150 73741 0.8 FOE-70 RI-PA-200 70403 0.8FOE-70 RI-PA-300 73742 0.9 FOE-70 RI-PA-400 70404 1.0FOE-70 RI-PA-450 73743 1.1 FOE-70 RI-PA-500 70405 1.1FOE-70 RI-PA-600 73744 1.2

Example: To build a riser in 22.5°, 30° or 45° select the relevant Riser Part (see Art. no. above), and matching Splice Angle Plate. For full flexibility combine Riser Parts with the Hinge Vertical on page 16.

How to use:Splice Angle Plates can be used to make 22.5°, 30° and 45° risers very simply and quickly.2 plates are required to build one riser.

Special angle plates like 60° can also be offered.

Splice Angle Plates 45°/30°/22.5°Type FRP Art. no. Kg SS Art. no. Kg

FOE-70 SA-VE-45 70406 0.1 74190 0.1FOE-100 SA-VE-45 70407 0.1 74191 0.1FOE-150 SA-VE-45 70408 0.2 74192 0.2

FOE-70 SA-VE-30 70409 0.1 74193 0.1FOE-100 SA-VE-30 70410 0.1 74194 0.1FOE-150 SA-VE-30 70411 0.2 74195 0.2

FOE-70 SA-VE-22.5 70412 0.1 74196 0.1FOE-100 SA-VE-22.5 70413 0.1 74197 0.1FOE-150 SA-VE-22.5 70414 0.2 74198 0.2

45°

30°

22.5°

To build your own flexi riser:First select the correct riser part FOE-70, 100 or 150. Then select the required splice angle 22.5°, 30° or 45°.

Factory built flexi risers and dimensional detailsrefer to pages 18, for article no. refer to page 19.

Build your own flexible riser from the components below:

-R4For small radius4 pcs Splice Angle plates of 45° between ladders and 1 Riser Part give fixed riser of 90° angle.Refer to table next page.

-R6For medium radius6 pcs Splice Angle plates of 30° between ladders and 2 Riser Parts give fixed riser angle of 90°.

-R8For large radius8 pcs Splice Angle plates of 22.5° between ladders and 3 Riser Parts give fixed riser angle of 90°. Refer to table next page.

Type C1 Art. no. Kg

FOE-100 RI-PA-150 74160 1.0 FOE-100 RI-PA-300 74161 1.1 FOE-100 RI-PA-450 74162 1.2 FOE-100 RI-PA-600 74163 1.3 FOE-100 RI-PA-750 74164 1.4 FOE-100 RI-PA-900 74165 1.6

Type C1 Art. no. Kg

FOE-150 RI-PA-150 74166 1.9 FOE-150 RI-PA-300 74167 2.0 FOE-150 RI-PA-450 74168 2.1 FOE-150 RI-PA-600 74169 2.2 FOE-150 RI-PA-750 74170 2.3 FOE-150 RI-PA-900 74171 2.4

18

CABLE LADDER FOEInstallation measurements between ladder ends at various riser radius.

-R4 -R6 -R8

Factory fabricated fixed risersFOE-100 Inside


FOE-70 Outside FOE-100 Outside

-R4 -R6 -R8

-R4 -R6 -R8

-R4 -R6 -R8

-R4 -R6 -R8

FOE-150 Outside


-R4 -R6 -R8

19

FOE-70 Riser 90° Outside Type Radius C2 Art. no. Kg

FOE-70 RI-OU-90-150-R4 393 73765 1.69FOE-70 RI-OU-90-200-R4 70424 1.72 FOE-70 RI-OU-90-300-R4 73766 1.79FOE-70 RI-OU-90-400-R4 70425 1.86FOE-70 RI-OU-90-450-R4 73767 1.99 FOE-70 RI-OU-90-500-R4 70426 2.02FOE-70 RI-OU-90-600-R4 73768 2.09



FOE-100 Riser 90° Outside Type Radius C1 Art. no. Kg

FOE-100 RI-OU-90-150-R4 393 74254 2.08FOE-100 RI-OU-90-300-R4 74255 2.18FOE-100 RI-OU-90-450-R4 74256 2.28FOE-100 RI-OU-90-600-R4 74257 2.38FOE-100 RI-OU-90-750-R4 74258 2.48FOE-100 RI-OU-90-900-R4 74259 2.68



FOE-150 Riser 90° OutsideType Radius C1 Art. no. Kg

FOE-150 RI-OU-90-150-R4 393 74290 3.42FOE-150 RI-OU-90-300-R4 74291 3.52FOE-150 RI-OU-90-450-R4 74292 3.62 FOE-150 RI-OU-90-600-R4 74293 3.72FOE-150 RI-OU-90-750-R4 74294 3.82FOE-150 RI-OU-90-900-R4 74295 3.92



CABLE LADDER FOEFactory fabricated fixed risersFOE-70 Riser 90° Inside Type Radius C2 Art. no. Kg

FOE-70 RI-IN-90-150-R4 409 73747 1.69FOE-70 RI-IN-90-200-R4 70415 1.72FOE-70 RI-IN-90-300-R4 73748 1.79 FOE-70 RI-IN-90-400-R4 70416 1.91FOE-70 RI-IN-90-450-R4 73749 1.99 FOE-70 RI-IN-90-500-R4 70417 2.03FOE-70 RI-IN-90-600-R4 73750 2.09

FOE-70 RI-IN-90-150-R6 607 73753 2.89FOE-70 RI-IN-90-200-R6 70418 2.97 FOE-70 RI-IN-90-300-R6 73754 3.09FOE-70 RI-IN-90-400-R6 70419 3.26FOE-70 RI-IN-90-450-R6 73755 3.49 FOE-70 RI-IN-90-500-R6 70420 3.56FOE-70 RI-IN-90-600-R6 73756 3.64

FOE-70 RI-IN-90-150-R8 804 73759 4.10FOE-70 RI-IN-90-200-R8 70421 4.20 FOE-70 RI-IN-90-300-R8 73760 4.34FOE-70 RI-IN-90-400-R8 70422 4.40FOE-70 RI-IN-90-450-R8 73761 5.00 FOE-70 RI-IN-90-500-R8 70423 5.10FOE-70 RI-IN-90-600-R8 73762 5.30

FOE-100 Riser 90° InsideType Radius C1 Art. no. Kg

FOE-100 RI-IN-90-150-R4 434 74236 2.08FOE-100 RI-IN-90-300-R4 74237 2.18FOE-100 RI-IN-90-450-R4 74238 2.28FOE-100 RI-IN-90-600-R4 74239 2.38FOE-100 RI-IN-90-750-R4 74240 2.48FOE-100 RI-IN-90-900-R4 74241 2.68



FOE-150 Riser 90° Inside Type Radius C1 Art. no. Kg




Cable Ladder Cover

Type C1 Art. no. Kg/m

FOE CO-CL-150 71468 1.0FOE CO-CL-200 71469 1.15FOE CO-CL-300 71470 1.6FOE CO-CL-400 71471 2.15FOE CO-CL-450 71472 2.4FOE CO-CL-500 71473 2.7FOE CO-CL-600 71474 3.15FOE CO-CL-750 71475 3.9FOE CO-CL-900 71476 4.7

GP Cover ClampType SS Art. no. Kg

FOE CC 74856 0.1

20

CABLE LADDER FOE

7 x 20mm

1M6x16

Installation of the heavy duty clamp is quick and easy.All that is required once the cover is in position is to remove thenuts located on top of each side of the reinforcement ribs. Thenhook the stainless steel clamp under the bottom flange of the ladderand lift clamp upwards so the slotted hole on top of clamp landsdirectly over the bolt. Once in place apply the nut to secure.

Ladder cover is supplied assembled and is pre-drilled to suit alternative GP cover clamp 74856 as standard.

HD Flexi Fixing ClampType Width Art. no.

FOE-70-150 168 71610 FOE-70-200 218 71611FOE-70-300 318 71612FOE-70-400 418 71613FOE-70-450 468 71614FOE-70-500 518 71615FOE-70-600 618 71616

FOE-100-150 176 71617FOE-100-300 326 71618FOE-100-450 476 71619FOE-100-600 626 71620FOE-100-750 776 71621FOE-100-900 926 71622

FOE-150-150 176 71623FOE-150-300 326 71624FOE-150-450 476 71625FOE-150-600 626 71626FOE-150-750 776 71627FOE-150-900 926 71628

Reinforcing ribs

HD Cover Fixing ClampsRecommended Number of HD Cover FC is four (4) per 3m ladder length, provides protection to 90Km/h. Winds above but not exceeding 160Km/h use eight (8) clamps. A diagram on best practice installation of covers is available upon request.

GP Cover ClampsRecommended Number of GP Cover Clamps 74856 is Six (6) per 3m ladder length, provides wind protection up to 70Km/h. Eight (8) clamps provides protection to 110Km/h.

FRP Flexi Fixing ClampsRecommended Number of FRP Flexi Fixing Clamps is two (2) per 3m ladder length, provides protection up to 80Km/h. Three (3) clamps provides protection to 110Km/h.

All the above wind load data was gathered from wind tunnel testing and does not simulate the actual working conditions. Please consider this when selecting the correct clamp system for your application.

M6 bolt sets are used to join panel together, these bolts are used to install the HD Cover Fixing Clamp as seen below.

HD Cover Fixing Clamp For heavy duty application Type SS Art. no. Kg

FOE-70 CC-HD 71484 0.05FOE-100 CC-HD 71485 0.07FOE-150 CC-HD 71486 0.1

For high wind application

HD Flexi ClampUsed as a support for ladder and fitting covers when required.

Use 6 clamps per section

CABLE LADDER FOE


All covers for fittings are suppllied as one piece construction

Cover Flat Elbow 90° Type C1 Art. no. Kg

FOE CO-FE-90-150 74715 0.9FOE CO-FE-90-300 74716 1.9FOE CO-FE-90-450 74717 3.2FOE CO-FE-90-600 74718 4.6FOE CO-FE-90-750 74719 6.3FOE CO-FE-90-900 74720 8.1

Cover Flat Elbow 45° Type C1 Art. no. Kg

FOE CO-FE-45-150 74801 0.6FOE CO-FE-45-300 74802 1.2FOE CO-FE-45-450 74803 2.0FOE CO-FE-45-600 74804 3.1FOE CO-FE-45-750 74805 4.1FOE CO-FE-45-900 74806 5.2

Cover Tee-Piece Type C1 Art. no. Kg

FOE CO-TE-150 74721 0.8FOE CO-TE-300 74722 1.7FOE CO-TE-450 74723 2.8FOE CO-TE-600 74724 4.1FOE CO-TE-750 74725 5.7FOE CO-TE-900 74726 7.6


HD Flexi Clamp seen on page 20 are designed to fit all FOE fittings to increase wind protection

21

Cover Flexi-Riser Type C1 Art. no. Kg

FOE CO-FR-150 74760 0.3FOE CO-FR-300 74761 0.6FOE CO-FR-450 74762 0.9FOE CO-FR-600 74763 1.2FOE CO-FR-750 74764 1.5FOE CO-FR-900 74765 1.8

Use the same for inside and outside risers.

H

30

4M6x16

Divider 3m lengths for straight ladders

Type H (mm) FRP Art. no. Kg/m

FOE-70 DI 40 73783 0.4FOE-100 DI 70 74541 0.5FOE-150 DI 120 74542 0.8

A full range of dividers are available for all horizontal fittings and all vertical fittings inside our outside radiuses.

For assistance, please contact Oglaend System.

Cover CrossType C1 Art. no. Kg

FOE CO-CP-150 71655 1.2 FOE CO-CP-300 71656 2.0 FOE CO-CP-450 71657 3.2FOE CO-CP-600 71658 4.4 FOE CO-CP-750 71659 6.0 FOE CO-CP-900 71660 8.0

Use the same for inside and outside risers.

22

CABLE LADDER FOE

A

40

11x20

65

Fixing Clamps Fits both ladders and trays

Type SS Art. no. Kg

FOE/FTE FC-B47x50 74492 0.1


Type SS Art. no. Kg

FOE/FTE FC-B40x65 74783 0.04

Used for vertical or horizontal installations.

11 x 20

Ø 11

Ø 7

Fixing/Expansion Clamp

Type A (mm) FRP Art. no. Kg

FOE FC-A40X65 6 71410 0.06

This clamp is suitable for the following products:FOE-150 NR , FOE-150 GA, FOE-100 and FOE-70.Not suitable for vertical supports. To secure tray or ladder in the vertical rise use article number 74783.

Fixing Clamp/Beam ClampAllows ladder movement when under thermal contraction or expansionor as a hold down clamp using the Allen screw.

Type SS Art. no. Kg

Expansion Guide beam clamp 75026 0.19Allen screw M6

1M10x20

Smart Jig Drilling Jig for 10 mm holes

Type SS Art. no. Kg

FOE-DJ70/100/150 74398 0.4

With this jig you can pre-drill holes in exact positions when cuttingladder lengths on site. After modifications use Oglaend System Sealing Kit to preserve the product quality.

FRP Step Down Splice Connector

Type SS Art. no.

SD-SC-150-100 71647

SD-SC-150-70 71648

SD-SC-100-70 71649

FOE-70 FOE-100 FOE-150

Ø 11

Sealing Kits Acrylic Sealing Products Art. no. Volume

FRP SK-2 (brush) 74779 5L

FRP SK-1 (spray) 74780 400ml

SK-1 not for export, local supply only, due to HSE.

Remember to use the correct safety equipment when applying. Ensure you work in well ventilated areas.

Acrylic Spray Sealer

Acrylic brush on sealer

23

CABLE LADDER FOE

Rung spacing standard is 300 mm. Rung widths from 150mm to 900mmAsk for alternative rung spacing or resin systems.Order 10 rungs per ladder at standard spacing of 300mm.

FOE Side ChannelType Art. no. 6m Art. no. 3m Kg/m

FOE-70 71453 74133 0.8FOE-100 71418 74136 1.4FOE-150 71454 74137 2.8FOE-150 GA 71456 71455 2.2

FOE Rung P = Punched

Type C1 Art. no. KgFOE RU-P-150 74469 0.2FOE RU-P-300 74470 0.3FOE RU-P-450 74471 0.4FOE RU-P-600 74472 0.5FOE RU-P-750 74473 0.6FOE RU-P-900 74474 0.7

FOE-70 Rung P = Punched

Type C1 Art. no. Kg

FOE-70 RU-150 71544 0.10FOE-70 RU-P-150 71544P 0.10FOE-70 RU-200 71545 0.12FOE-70 RU-P-200 71545P 0.12FOE-70 RU-300 71546 0.16FOE-70 RU-P-300 71546P 0.16FOE-70 RU-400 71547 0.20FOE-70 RU-P-400 71547P 0.20 FOE-70 RU-450 71548 0.22FOE-70 RU-P-450 71548P 0.22FOE-70 RU-500 71549 0.24FOE-70 RU-P-500 71549P 0.24FOE-70 RU-600 71550 0.28FOE-70 RU-P-600 71550P 0.28

«Build your own FOE ladder at site» Pre-drilled side channels in 70,100 or 150 heights, supplied in 3 or 6m lengths for easy assembly at site. Rungs supplied pre-slotted, complete with the patented SmartLok insert and SS pan head bolts for easy assembly.

PTTEP MontaraMearsk Al Shaheen

Maersk Al Shaheen

PTTEP Montara

24

Cable Tray FTE-50 Type B A C2 Art. no. C1 Art. no. Kg/m

FTE-50 CT-50 70 74400 74400C1 1.3FTE-50 CT-100 122 74401 74401C1 1.7FTE-50 CT-150 172 74399 74399C1 2.0FTE-50 CT-200 222 74402 74402C1 2.3FTE-50 CT-300 324 74403 74403C1 3.0FTE-50 CT-400 426 71460 71460C1 4.5FTE-50 CT-600 624 71557 71557C1 6.6

Cable Tray FTE-80 Type B A C2 Art. no. C1 Art. no. Kg/m

FTE-80 CT-50 72 74410 74410C1 1.9FTE-80 CT-100 122 74411 74411C1 2.2FTE-80 CT-150 172 74409 74409C1 2.6FTE-80 CT-200 224 74412 74413C1 3.0FTE-80 CT-300 324 74413 74413C1 3.5FTE-80 CT-400 424 71461 71461C1 5.1

CABLE TRAY FTE

CABLE TRAY FTE

3000 mm

300 mm

3000 mm

50

80

BA

BA

Loading depth H: 47

Loading depth H: 77

50

Loading depth H: 47 80

Loading depth H: 77

Product selection and options FTE Tray Range Standard Range Product Option on Request Resin CodeMaterial Polyester Class 2 (C2) a. Polyester Class 1 with anti-static C1A Polyester Class 1 (C1) b. OLSTAR system, low flame, smoke & toxicity resin* AC c. Vinyl ester VE d. Phenolic System PHPerforations Bottom Non perforated bottomLength 3m 6mWidth 50-100-150-200-300-400 and 600mm Contact Oglaend System for other sizes Height 50-80mmAssembly SS bolt sets with anti-vibration locking nut washers as standard Splice detail Full height SS/FRP splicing details Elbow Radius 250mm Alternative radiuses available on requestAngles 45˚ or 90˚ 30˚ or 60˚ * OLSTAR acrylic system ABS approved with anti-static properties

NOTE: For standard products select the article number below.Loading: See page 30. Chemical guide : See page 44. Tray accessories: See pages 24-29. Nuts and bolts: See page 42 and for full range page 43.

FTE-50 FTE-80

4(8)M10x20


GUIDELINES: To change resin system: Select resin code and add to article no.Example: Polyester Resin Class 1 anti-static = Art. no. 74400C1A

25

CABLE TRAY FTE

Width

500300

237.5237.5

167.9

69.6

Tee-Piece Type C2 Art. no. C1 Art. no. KgFTE-50 TE-50/50 74660 74660C1 0.6FTE-50 TE-100/100 74661 74661C1 0.7FTE-50 TE-150/150 74659 74659C1 0.9FTE-50 TE-200/200 74662 74662C1 1.1FTE-50 TE-300/300 74663 74663C1 1.6FTE-50 TE-400/400 71465 71465C1 2.1FTE-50 TE-600-600 71561 71561C1 2.7

FTE-80 TE-50/50 74664 74664C1 0.9FTE-80 TE-100/100 74665 74665C1 1.0FTE-80 TE-150/150 74668 74668C1 1.2FTE-80 TE-200/200 74666 74666C1 1.4FTE-80 TE-300/300 74667 74667C1 1.9FTE-80 TE-400/400 71495 71495C1 2.9

All Steel(SS) accessories are supplied in AISI 316L.

Splice Angle HorizontalType FRP Art. no. SS Art. no. Kg

FTE-50 SA-HO-50 70436 74870 0.1FTE-80 SA-HO-80 70437 74871 0.2

FRPSS

2M6x16

Flat Elbows 90° Type C2 Art. no. C1 Art. no. KgFTE-50 FE-90-50 74568 74568C1 0.8FTE-50 FE-90-100 74569 74569C1 1.1FTE-50 FE-90-150 74572 74572C1 1.3FTE-50 FE-90-200 74570 74570C1 1.6FTE-50 FE-90-300 74571 74571C1 2.2FTE-50 FE-90-400 71463 71463C1 4.8FTE-50 FE-90-600 71559 71559C1 6.5

FTE-80 FE-90-50 74582 74582C1 1.3FTE-80 FE-90-100 74583 74583C1 1.5FTE-80 FE-90-150 74581 74581C1 1.8FTE-80 FE-90-200 74584 74584C1 2.1FTE-80 FE-90-300 74585 74585C1 2.7FTE-80 FE-90-400 71493 71493C1 3.2

Flat Elbows 45° Type C2 Art. no. C1 Art. no. KgFTE-50 FE-45-50 74575 74575C1 0.4FTE-50 FE-45-100 74576 74576C1 0.6FTE-50 FE-45-150 74574 74574C1 0.7FTE-50 FE-45-200 74577 74577C1 0.8FTE-50 FE-45-300 74578 74578C1 1.1FTE-50 FE-45-400 71464 71464C1 1.3FTE-50 FE-45-600 71560 71560C1 2.0

FTE-80 FE-45-50 74590 74590C1 0.6FTE-80 FE-45-100 74591 74591C1 0.8FTE-80 FE-45-150 74589 74589C1 1.0FTE-80 FE-45-200 74592 74592C1 1.1FTE-80 FE-45-300 74593 74593C1 1.4FTE-80 FE-45-400 71494 71494C1 1.7

Radius Tee-Piece Type C2 Art. no. C1 Art. no. KgFTE-50 TE-50-50 R3 71629 71629C1 1.7 FTE-50 TE-50-100 R3 71630 71630C1 2.4 FTE-50 TE-50-150 R3 71631 71631C1 2.8 FTE-50 TE-50-200 R3 71632 71632C1 3.2 FTE-50 TE-50-300 R3 71633 71633C1 3.7 FTE-50 TE-50-400 R3 71634 71634C1 4.0 FTE-50 TE-50-600 R3 71635 71635C1 4.3

FTE-80 TE-50-50 R3 71636 71636C1 2.5 FTE-80 TE-50-100 R3 71637 71637C1 2.9 FTE-80 TE-50-150 R3 71638 71638C1 3.4 FTE-80 TE-50-200 R3 71639 71639C1 3.9 FTE-80 TE-50-300 R3 71640 71640C1 4.3 FTE-80 TE-50-400 R3 71641 71641C1 4.8

2(4)M6x16

4M6x16

26

Supplied as inside riser. Turn the splice plates over to make an outside riser.

For both in - and outside use

4M6x16

2M6x16

Splice Connectors

Type FRP Art. no. SS Art. no. Kg

FTE-50 SC 75043 74880 0.1FTE-80 SC 75052 74881 0.2

Expansion Splice Plates


FTE-50 SC Exp 71608 71691 0.1FTE-80 SC Exp 71609 71692 0.2

CABLE TRAY FTE

Covers for tray over 300mm (w) utilizes ladder and fittings covers

When used as expansion coupler remember to:• Use bolts with “nylock” lock nuts in the 4x rectangular slotting and do not tighten the nuts. • Place one coupler for approx 25m span to count for thermal expansion.

Cover FTE 3m length Type C2 Art. no. C1 Art. no. Kg/m

FTE CO-CT-50 74450 74450C1 0.8FTE CO-CT-100 74451 74451C1 1.0FTE CO-CT-150 74449 74449C1 1.3FTE CO-CT-200 74452 74452C1 1.6FTE CO-CT-300 74453 74453C1 2.1FTE CO-CT-400 71462 71462C1 2.5FTE CO-CT-600 71570 71570C1 3.0

Splice Angle 45°Type FRP Art. no. SS Art. no. KgFTE-50 SA-VE-45 75041 74872 0.1FTE-80 SA-VE-45 75042 74873 0.2

The splice angle is available in standard 45° or 30° & 60°.Excellent for building risers on site.Use our pre-slotted Drill Jig to drill new holes after cutting trays.Seal with Oglaend system resin for improved life span.

Combi-RiserType FRP Art. no. SS Art. no. KgFTE-50 CR-50 75046 74670 0.9FTE-50 CR-100 75047 74671 1.0FTE-50 CR-150 75039 74669 1.1FTE-50 CR-200 75048 74672 1.2FTE-50 CR-300 75049 74673 1.4FTE-50 CR-400 71642 71490 1.6FTE-50 CR-600 71644 71562 2.0

FTE-80 CR-50 75072 74674 1.5FTE-80 CR-100 75073 74675 1.6FTE-80 CR-150 75074 74678 1.7FTE-80 CR-200 75075 74676 1.8FTE-80 CR-300 75076 74677 2.0FTE-80 CR-400 71643 71496 2.2

27

BA C

CABLE TRAY FTE

Cover Combi-Riser

Type C2 Art. no. C1 Art. no. Kg

FTE-CO-CR-50 74844 74844C1 0.25FTE-CO-CR-100 74845 74845C1 0.4FTE-CO-CR-150 74848 74848C1 0.65FTE-CO-CR-200 74846 74846C1 0.8FTE-CO-CR-300 74847 74847C1 1.0FTE-CO-CR-400 71531 71531C1 1.1FTE-CO-CR-600 71653 71653C1 1.2

Cover Tee-Piece


FTE-CO-TE-50 74840 74840C1 0.25FTE-CO-TE-100 74841 74841C1 0.4FTE-CO-TE-150 74839 74839C1 0.65FTE-CO-TE-200 74842 74842C1 0.8FTE-CO-TE-300 74843 74843C1 1.0FTE-CO-TE-400 71530 71530C1 1.1FTE-CO-TE-600 71654 71654C1 1.2

AC

Cover Clip Quick and Easy

Type SS Art. no. Kg/m

FTE-50 CC 71352 0.01FTE-80 CC 71459 0.02

FRP Step Down Splice PlateThis FRP Step Splice Plate is available in FRP for all heights.

Type SS Art. no. Kg/m

FTE-SD-SP-80-50 71650 0.15

Cover Flat Elbow 90°


FTE-CO-FE-90-50 74735 74735C1 0.4FTE-CO-FE-90-100 74736 74736C1 0.5FTE-CO-FE-90-150 74739 74739C1 0.8FTE-CO-FE-90-200 74737 74737C1 1.0FTE-CO-FE-90-300 74738 74738C1 1.5FTE-CO-FE-90-400 71499 71499C1 1.9FTE-CO-FE-90-600 71651 71651C1 4.6

Cover Flat Elbow 45°


FTE-CO-FE-45-50 74940 74940C1 0.2FTE-CO-FE-45-100 74941 74941C1 0.25FTE-CO-FE-45-150 74944 74944C1 0.4FTE-CO-FE-45-200 74942 74942C1 0.7FTE-CO-FE-45-300 74943 74943C1 0.75FTE-CO-FE-45-400 71500 71500C1 0.95FTE-CO-FE-45-600 71652 71652C1 3.1

Special RequestIf you have a special design requirement, please contact Oglaend System for options and availability.

28

3M6x16

CABLE TRAY FTE

Hinge Vertical


FTE-50 HV 75044 74882 0.2FTE-80 HV 75053 74883 0.3

5M6x16

Reducer Part2M6x16

Reducer Part

Type Art. no. Kg

FTE-50 RP-50 70438 0.10FTE-50 RP-100 70439 0.12FTE-50 RP-150 70440 0.15FTE-50 RP-200 70441 0.17FTE-50 RP-300 71606 0.20

FTE-80 RP-50 70442 0.15FTE-80 RP-100 70443 0.18FTE-80 RP-150 70445 0.20FTE-80 RP-200 70446 0.22FTE-80 RP-300 71607 0.25

2M4.8x13

Height = 94 / 124mm

Cover Fixing Clamp Used in high wind application

Type Width FRP Art. no. Kg

FTE-50 CC-HD-50 130mm 73930 0.31FTE-50 CC-HD-100 180 73931 0.37FTE-50 CC-HD-150 230 73929 0.43FTE-50 CC-HD-200 280 73932 0.49FTE-50 CC-HD-300 380 73933 0.60FTE-50 CC-HD-400 480 71491 0.72FTE-50 CC-HD-600 680 71563 0.82

FTE-80 CC-HD-50 130 73934 0.35FTE-80 CC-HD-100 180 73935 0.41FTE-80 CC-HD-150 230 73938 0.47FTE-80 CC-HD-200 280 73936 0.53FTE-80 CC-HD-300 380 73937 0.64FTE-80 CC-HD-400 480 71497 0.75

Supply with complete profiles, rods and nuts.

Height: Add 44mm to tray height.

End Cover

Type FRP Art. no. Kg

FTE-50 EC-50 74727 0.02FTE-50 EC-100 74728 0.04FTE-50 EC-150 74885 0.05FTE-50 EC-200 74728 0.06FTE-50 EC-300 74730 0.10FTE-50 EC-400 71492 0.12FTE-50 EC-600 71564 0.16

FTE-80 EC-50 74731 0.03FTE-80 EC-100 74732 0.06FTE-80 EC-150 74886 0.08FTE-80 EC-200 74733 0.10FTE-80 EC-300 74734 0.20FTE-80 EC-400 71498 2.30

29

Divider

Type H (mm) FRP Art. no. Kg/m

FTE-50 DI 45 74540 0.4FTE-80 DI 70 74541 0.5

HH: 45 and 70 mm

4M6x16

30

FTE trays 80 50


Type SS Art. no. Kg

FOE/FTE FC-A 74492 0.04

Smart Jig Drilling Jig for 7mm drill

Type SS Art. no. Kg

FTE-DJ 50/80 74397 0.2

With this jig you can pre-drill holes in exact positions when cuttingtray lengths on site. After modifications, use Oglaend System Sealing Kit to preserve the product quality.

11 x 20

Ø 11

Ø 71

M10x20

Ø 11


Type SS Art. no. Kg

FOE/FTE FC-B40x65 74783 0.04

Used for vertical and horizontal installations. Supplied with1 x M10 x 20 bolt set used to fix clamp to product. We do not supply any bolt set to secure clamp to structure unless otherwise agreed.

CABLE TRAY FTE







Acrylic brushon sealer

30

LOAD TABLE FOR OGLAEND SYSTEMFOE CABLE LADDER & FTE TRAYS

Product Type FOE-70 FOE-100 FOE-150GA FOE-150 FOE-150 FOE-150Resin System ISO POLYESTER ISO POLYESTER ISO POLYESTER ISO POLYESTER OLSTAR SYSTEM PHENOLIC SYSTEM Load (lb/ft) (lb/ft) (lb/ft) (lb/ft) (lb/ft) (lb/ft) (lb/ft)

FOE CABLE LADDERS

Span (ft) 4.9 195 276 403 470 – – 6.6 81 208 235 302 336 – 8.0 75 (8A) 178 202 235 302 – 9.8 30 155 175 222 276 – 12.0 – 148 (12C) 148 (12C) 208 249 – 13.1 – 104 121 188 208 – 14.8 – 81 116 155 168 – 16.0 – 50 111 (16B) 134 151 – 18.0 – – 63 118 121 – 20.0 – – 53 148 (20C) 148 (20C) 148 (20C)• NEMA FG1 data indicated above has minimum safety factor of 1.5.• RED numbers denotes Nema rated loads; Text in BOLD are actual results.

Product Type FOE-70 FOE-100 FOE-150GA FOE-150 FOE-150 FOE-150Resin System ISO POLYESTER ISO POLYESTER ISO POLYESTER ISO POLYESTER OLSTAR SYSTEM PHENOLIC SYSTEM Load (kg/m) (kg/m) (kg/m) (kg/m) (kg/m) (kg/m) (kg/m)

FOE CABLE LADDERS

Span (mm) 1500 420 790 850 920 940 – 2000 185 600 700 870 900 – 2500 109 500 580 700 830 – 3000 63 325 500 640 780 – 3500 – 178 390 610 700 – 4000 – 130 350 530 580 – 4500 – 90 310 430 410 – 5000 – 75 220 304 330 – 5500 – 52 145 210 230 – 6000 – 39 130 156 162 170 • IEC 61537 data indicates a minimum safety factor of 1.7. Unless otherwise stated, data above is theoretical and based on simple beam uniformed distributed load. Text in BOLD are actual results.

SAFE WORKING LOAD (SWL) KG/M - BASED ON IEC 61537

SAFE WORKING LOAD (LB/FT) BASED ON NEMA FG-1

SAFE WORKING LOAD (KG/M) - UNIFORM DISTRIBUTED LOAD - BASED ON IEC 61537

Span (ft) 4.9 6.6 8.0 9.8 12.0 13.1 14.8 16.0 18.0 20.0Span L (mm) 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000SWL Load (kg/m) kg/m kg/m kg/m kg/m kg/m kg/m kg/m kg/m kg/m kg/m

FTE CABLE TRAYS, ISO POLYESTER

74400 FTE 50-P-50 180 100 70 4074401 FTE-50-P-100 190 105 90 5074399 FTE-50-P-150 200 110 105 55 74402 FTE-50-P-200 240 130 115 6074403 FTE-50-P-300 300 140 135 7671460 FTE-50-P-400 390 220 150 8071557 FTE-50-P-600 450 250 160 9074410 FTE-80-P-50 260 120 100 65 4574411 FTE-80-P-100 285 130 107 70 4774409 FTE-80-P-150 320 155 110 76 5074412 FTE-80-P-200 350 190 130 80 5574413 FTE-80-P-300 520 250 190 130 85 7071461 FTE-80-P-400 650 360 250 160 110 90• IEC 61537 data indicates a minimum safety factor of 1.7• Text in BOLD are actual results.

FIGURE 1SWL Loading Test Procedure (2004)

FIGURE 2Uniformly Distributed Load

1) All of the loading data shown in the cataloque for IEC 61537 are achieved in accordance to the above Figure 1.

2) Load tests for NEMA FG-1 are carried out on a section of the cable ladder non-fixed at both ends as per Figure 2 and conducted up to destruction of the product.

: Supporting Distance: Support: Cable Tray Joint : Cable Tray

L L/2 L/2L/5 0.4LL

MeasurementOf Deflection

Ref.: IEC Pub. 61537 “ Cable Tray Systemsand Cable Ladder Systems for Cable Management”

FRP / GRP MULTIDISCIPLINE SUPPORT SYSTEM

Our FRP support system offers a unique design concept

Being first is good, being smart is better, being both is Simply the Best! 31

32

We offer welded starters

for whatever support solution

you need!

THIS IS HOW YOU GET STARTED:

Welded Starters

Increased load capacity

The Mekano™ Support Channels See the full range in our MultiGrid catalogue.

Choose channels according to the required load capacity

Choose starters according to the required load capacity

FOR HOT WORK


MultiGrid™ – The Most Complete Multidiscipline Support System

33

The FRP Support System is independent, still integrated in the MultiGrid™ steel concept

Cold Work Solutions with FRP channels and parts.

Cold WorkStarting Bracketsfor Bolting and clamp on.Eliminate the need for HOT WORK.

Hot Work Starting Brackets

for Welding.

The FRP Support Channels See full range on page 35.

The FRP system is a complete integrated MultiGrid™ option

We offer bolted starters

for whatever support solution

you need!

Increased load capacity Choose starters according to the required load capacity

MultiGrid™ in FRP

MultiGrid™ – The Most Complete Multidiscipline Support System

The FRP Support System is secured to main structure with various starter brackets. See full range onpage 35.

Bolted Starters

FOR COLD WORK

The FRP Support Channelscombined with FRP or Steel Starters

give required load capacity.See page 34.


Art. no.: 73632Note: Use our Drill Jig to secure the holes in right position. See page 37.

Art. no.: 73632 CH100-1Art. no.: 749911000 kg

CH100-1Art. no.: 749912500 kg

Load Data for max. Dead Weight Vertical Safety 2.

34

Product selection and options FRP Channel Range Standard Range Product Option on Request Resin Code

Material Polyester Class 2 (C2) a. Polyester Class 1 C1Length 3m 6mAssembly SS bolt sets with anti-vibration locking nut washer NOTE: For standard products select the article number below. Loading: See below. Chemical Guide : See page 44. Support accessories: See pages 35-39. Nuts and bolts: See page 42 and for full range page 43.

4(8)M10x20

SUPPORT SYSTEM IN FRP


Max bending moment for the bolted connection is 612 Nm.

Max bending moment for the bolted connection is 612 Nm.

Max “dead weight load” for each hanger is 2500 kg with use of 4pcs M10 bolt in each leg.

GUIDELINES: To change resin system: Select resin code and add to article no.Example: Polyester Resin Class 1 = Art. no. 74991C1C2 = Standard, resin code not required.

Point load

W

Deflection 3°

Point load

UDL load

Deflection 3°

Point load

W

H

W

Channel CH100-1 Max load in kgSafety factor x 2 included. Bolt dim. M10. Support Width = W Channels* Point UDL W (m) Single/Double Load (kg) Load (kg) 2.00 Single 140 140 2.00 Double 345 345 1.75 Single 172 196 1.50 Single 245 326 1.25 Single 312 499 1.00 Single 340 680

* Only the horizontal channel is double (Back to back). All verticals are single.

Type U-Frame Load data for typical industrial support

Channel CH100-1 Max load in kg

Safety factor x 2 included. Bolt dim. M10. Support Width = W. Height = H.Type Cantilever Point Deflection W (m) H (m) Channels Load (kg) 3° (kg) 0.5 Single 125 215Type L-Frame 0.5 0.5 Single 169 200 0.5 1.0 Single 125 120

Type Cantilever and L-Frame

100 50 42 24 45 43 43 43 53 55

74991 73632 7137171370 73642 74480

35

Beam Clamp Type FRP C2 Art. no. Kg

S-FRP BC-LI 73633 0.2

How to use: For Beam Clamp Light SupportUse U-channel adapted to beam width + 100mm. Add Beam Clamp Light after adapting them to the flange height (B).

B

1 bolt

2 bolts

Heavy duty double channel support

Light duty single channel support

1(2)M10x50

Type FRP C2 Art. no. Kg/m

S-M FRP CH100-1-6 74991 2.15S-M FRP CH53-1-6 73642 1.60 S-M UNO CH45-1-U-6 71370 1.34 S-M UNO CH43-1-U-6 71371 1.12 S-M FRP CH42-1-6 73632 0.93S-M UNO CH42-1-U-6 74480 0.87

Support ChannelsThese channels are the basic support channels when combinedwith steel brackets specially developed by Oglaend System, will give the unique FRP Smart Support Solution.

Height Width Weight Area

X Axis Y Axis Ix Cx Rx Iy Cy Ry Art. no. (mm) (mm) (kg/m) (mm2) (mm4) (mm) (mm) (mm4) (mm) (mm)

71370 Heavy duty 43 45 1.34 688 144100 22.5 14.47 203415 18.98 17.19

71371 Medium/Heavy duty 43 43 1.12 575 126081 21.50 14.81 161322 19.62 16.76

74480 Light duty 42 42 0.87 464 95837 21.0 14.37 133232 18.49 16.94

Loading & Deflection Table for UNO channels

Maximum uniformly distributed load on X-X Axis Maximum uniformly distributed load on Y-Y Axis

71371 71370 74480 71371 71370 74480 Span Weight Deflect Weight Deflect Weight Deflect Weight Deflect Weight Deflect Weight Deflect (M) (Kgf) (mm) (Kgf) (mm) (Kgf) (mm) (Kgf) (mm) (Kgf) (mm) (Kgf) (mm)

1.00 500 20 530 20 240 16 520 25 640 26 460 18 1.25 410 31 450 32 190 28 440 38 520 40 370 31 1.50 360 41 390 41 165 37 390 55 490 65 280 54 2.00 250 72 280 75 105 62 290 65 290 80 200 75

Sectional Properties

B

42 42

* Back to back channel Art No. 71669

is available upon request.

X

YX

Y

36

Beam Clamp and Starter BracketFits beam widths 200-300mm, supplied complete with brackets andbolt set. Give strong support for Back to Back Beam 100x100.

Type SS Art. no. Kg

S-FRP FC-BC (Beam C) 73634 5.2

S-FRP FC-BS (Bolt Support) 73636 1.2

The Starter Bracket provides the same advantages as concrete constructions.Fix with 4 expansion bolts M10x60. Supplied.

Every connection point with Gusset Plates need 8 bolt sets:

S-M HE-M10x30 1371327

S-M NU-FL-M10 1371973

Supplied as bolt set ordering gusset plates.

4M10x60

4M10x30

8M10x30

8M10x30

4M10x30

Use our Smart Jigs (see page 38)

for exact and easy mounting.

For BeamsFor Concrete

A

40

11x20

65Fixing/Expansion Clamp

Type A (mm) FRP Art. no. Kg

FOE FC-A40X65 6 71410 0.06

This clamp is suitable for the following products:FOE-150 NR, FOE-150 GA, FOE-100 and FOE-70.

Gusset Plates T and Lfor channel support Type Art. no. Kg

S-FRP GP-T 79970 0.5

S-FRP GP-L 79969 0.4

How to use: For easy and quick installation use our Smart Jigs forpre-drilling the 8 holes. See next page.

37

Smart Jig Drilling Jig for 10mm holes

Type Art. no. Kg

DJ-BA-80x160 79959 0.2

DJ-GP-L-80x400 79962 0.6

DJ-GP-T-80x200 79961 0.3

With this jig you can pre-drill holes in exact positions when cuttingchannel lengths on site. After modifications use Oglaend System Sealing Kit to preserve the product quality.

Back to Back

Channel / Gusset plate L /Ceiling brackets

Channel / Gusset plate T

Spacer Platefor Double Channel Support Type C2 Art. no. Kg

S-FRP SH-100x50 74996 0.05

How to use: Place the plate between the channel ends and holdwith a clamp when drilling through. See our special Smart Jigs above.

1M10x30

M10x30Stringer M10x70 Channel Bracket for Stringer For Stringer Support use special Stringer Brackets with 1 through going M10x70 bolt for channel lengthwise stringer or 1 M10x30 bolt for crosswise channel support.

Type SS Art. no.

S-FRP BC-ST 73640

Supplied with both M10x30 and M10x70.

1M10x30

1M10x70







Acrylic brush on sealer

Part Description Length Pack SS Art. no. Kgs (mm) /m Bolts S-M-PSM6x60 M6 25 71419 0.02 Drill Jig – 1 71555 –

38

Top

PostD

L

Cross Section Arm

Top and bottom supports are pre-drilled to accept 2 x M6 x 60 SS316 bolts. Use the Drill Jig to drill the post once you know the length and insert into top and bottom UNO channel section and insert the M6 x 60 bolts sets.

NEW!NEW!

Ceiling Support for FRP Trays

A

60 90

Loading for a TPU one nut fixing =

240kgs

Safety factory = 3

Support Plate with 2 nuts M10

Type A (mm) Pack FRP Art. no. Kg

S-FRP PL-90x60 6 15 71532 0.10

Threaded Rod Type FRP Art. no. Kg

S-FRP TR-M10-1500 71364 0.15

Glass filled Polyurethane Nut

Type Pack FRP Art. no. Kg

S-FRP NU-FL-M10 25 71365 0.007

NEW!NEW!

Build your own TRAPEES SUPPORT

Part Description Length Dia Pack FRP Art. no. Kgs (mm) (mm) /m

Uno ChannelS-M UNO CH42-1-U-6 6000 – – 74480 0.87S-M UNO CH43-1-U-6 6000 – – 71371 1.12S-M UNO CH45-1-U-6 6000 – – 71370 1.34TFRP Threaded Rod S-FRP TR-M10-1500 1500 M10 – 71364 0.15TPU Nuts NU-FL-M10 (40 LF) M10 – 25 71362 0.007NU-FL-M10 (26 SF) M10 – 25 71365 0.007Support Washer S-M Washer 50x37 – 25 71552 0.02TPU BoltsS-M HE-M10x40 (40 LF) 40 M10 25 71359 –S-M HE-M10x40 (26 SF) 40 M10 25 71413 –Fixing/Expansion ClampFOE FC-A40x65 – – – 71410 0.06TPU Nut for UNO ChannelsS-UNO NU-M10 (CN-43) – M10 25 71551 –

CENTRAL SUPPORTType Depth Length Loading FRP Art. no. Kg (mm) (mm) (kgf)

S-FRP CS-50-150 500 135 310 71440 1.9S-FRP CS-50-200 500 235 300 71441 2.2S-FRP CS-50-300 500 335 300 71442 2.5S-FRP CS-50-400 500 435 260 71443 2.8S-FRP CS-50-500 500 535 245 71445 3.1S-FRP CS-50-600 500 635 240 71446 3.4

Safety factor = 3 Build your ownCENTRAL SUPPORT Part Description Length Pack FRP Art. no. Kgs (mm) /m Top Fixing – – 71429 0.20Post S-M UNO CH43-1-U-6 6000 – 71371 1.12 Cross Section CS-150 200 – 71433 0.25CS-200 250 – 71434 0.35CS-300 350 – 71435 0.50CS-400 450 – 71436 0.65CS-450 500 – 71437 0.73CS-500 550 – 71438 0.82CS-600 650 – 71439 0.98

NEW!NEW!

39

Type Dim L UDL Weight (mm) Kgf Art. no. Kg

FRP CA-LD-50 85 170 71477 0.39FRP CA-LD-100 135 109 71478 0.43FRP CA-LD-150 185 81 71479 0.47FRP CA-LD-200 235 65 71480 0.51FRP CA-LD-300 335 47 71481 0.57FRP CA-LD-400 435 41 71482 0.64

2 bolts

2M10x30

Toggle Clamp

Beam width+100 mm

Lighting installation, simple and smart using our twisted bracket.

Channel Bracket Twisted for light channel support Type SS Art. no. Kg

S-FRP CB-TW 73638 0.3

How to use:

For Beam Clamp Light Support (see page 35)Use U-channel adapted to beam width + 100mm. Add Beam Clamp Light after adapting them to the flange height.

For Corrugated Steel Roof Support use a minimum length of the U-channel for drilling 2 holes Ø11mm with the same cc as 3 bottom corrugated plates having 2 holes Ø25mm for Toggle Clamp.

Type SS Art. no.

S-FRP TC-M10x100 73639

cc

Heavy Duty FRPCantilever Arm Type Dim L UDL C2 Weight (mm) Kgf Art. no. Kg

FRP CA-HD-100 135 390 70448 1.0FRP CA-HD-150 185 380 70449 1.1FRP CA-HD-200 235 370 70450 1.2FRP CA-HD-300 335 325 70271 1.5FRP CA-HD-450 485 225 70272 1.9FRP CA-HD-600 635 215 70273 2.1FRP CA-HD-750 785 200 70274 2.3FRP CA-HD-900 985 170 71553 2.6

UDL = Uniformly Distributed Load - safety factor = 3.Longer supports can be supplied upon request.

Light Duty FRPCantilever Arm

UDL = Uniformly Distributed Load - safety factor = 3. Longer supports can be supplied upon request.

L

L

NEW &

improved

NEW

FRP Profile Description:

40

Channels Dimensions mm Shape Stock 3m 6m C1 C2 VE Kg/m Art. No. Art. No. Color H x W x T x (T) C1 C2 S-M FRP CH100-1-6 100 x 50 x 6 x x x x NS 2.15 74991C1 74991 RAL7040S-M FRP CH53-1-6 53 x 55 x 7 x 5 x x x x NS 1.6 73642C1 73642 RAL7040Channel Strut S-M UNO CH43-1-U-6* 43 x 43 x 4 x x x x NS 1.12 71371C1 71371 RAL7040S-M UNO CH45-1-U-6* 45 x 43 x 5 x x x x NS 1.34 71370C1 71370 RAL7040S-M UNO CH42-1-U-6* 42 x 42 x 3 x x x x NS 0.87 74480C1 74480 RAL7040S-M FRP CH42-1-6 42 x 24 x 5 x 3 x x x x NS 0.93 73632C1 73632 RAL7040Flat Sheet 926 x 3000 x 3 x x x NS 5.3 74143C1 — RAL7040 136 x 3000 x 6.35 x x x NS 1.6 74146C1 — RAL7040Rectangular Box RU-LW-3000 37 x 20 x 3000 x x x x x NS 0.5 74479C1 74479 RAL7040Equal Angle 50 x 50 x 5 x x x x NS 0.9 74120C1 74120 RAL7040 50 x 50 x 3 x x x x NS 0.6 74121C1 74121 RAL7040 75 x 75 x 6 x x x x NS 1.56 71534C1 71534 RAL7040 101 x 101 x 6.4 x x x x NS 2.5 71535C1 71535 RAL7040 152 x 152 x 6.4 x x x x NS 3.61 71536C1 71536 RAL7040Unequal Angle 100 x 50 x 6 x 6 NS x x x NS 1.65 71533C1 71533 RAL7040Square Box 50.8 x 50.8 x 6.35 NS x x x NS 2.1 74126C1 74126 RAL7040Wide Flange Beam 102 x 102 x 6.4 NS x x x NS 3.6 71537C1 71537 RAL7040 152 x 152 x 6.4 NS x x x NS 5.45 71538C1 71538 RAL7040 203 x 203 x 9.5 NS x x x NS 10.85 71539C1 71539 RAL7040I Beam 102 x 50 x 6.4 NS x x x NS 2.4 71540C1 71540 RAL7040 152 x 76 x 9.5 NS x x x NS 5.3 71541C1 71541 RAL7040 305 x 152 x 9.5 NS x x x NS 10.75 71542C1 71542 RAL7040

* denotes strut type pro�le x = stocked itemsNS = none stocked

41

Typical coupon properties of Oglaend System Reinforced Plastics structural fiberglass channels (Standard, Polyester & Vinylester fire retardant shapes). Properties derived per the ASTM test method. Surface veil and ultraviolet inhibitors are standard in all channels.

Mechanical Properties ASTM Units PE VETensile Stress, LW D-638 psi 30,000 35,000Tensile Stress, CW D-638 psi 7,000 10,000Tensile Modulus, LW D-638 106 psi 2.5 3.0Tensile Modulus, CW D-638 106 psi 0.8 1.1Compressive Stress, LW D-695 psi 30,000 35,000Compressive Stress, CW D-695 psi 15,000 20,000Compressive Modulus, LW D-695 106 psi 2.5 2.5Compressive Modulus, CW D-695 106 psi 1.2 1.9Flexural Stress, LW D-790 psi 30,000 35,000Flexural Stress, CW D-790 psi 10,000 14,000Flexural Modulus, LW D-790 106 psi 1.8 2.0Flexural Modulus, CW D-790 106 psi 0.8 0.8Modulus of Elasticity, E Full 106 psi 2.6 2.9 Section Shear Modulus — 106 psi 0.450 0.450Short Beam Shear D-2344 psi 4,500 4,800Punch Shear D-732 psi 10,000 10,000Notched Izod Impact, LW D-256 ft-lbs/in 25 30Notched Izod Impact, CW D-256 — — —

Physical Properties ASTM Units PE VE

Barcol Hardness D-2583 — 47 4724 Hour Water Absorption D-570 % max 0.43 0.43Density D-792 lbs./in.3 .061-.070 .061-.070Coefficient of Thermal Expansion, LW D-696 10-6 in/°C 10 10

Electrical Properties ASTM Units PE VE

Arc Resistance, LW D-495 seconds 120 120Dielectric Strength, LW D-149 kv./in. 35 35Dielectric Strength, PF D-149 volts/mil. 200 200Dielectric Constant, PF D-150 60hz 8 8

Fire Retardant Polyester and Fire Retardant Vinylester Structural Profiles:

Flammability Properties ASTM Units PE VETunnel Test E-84 Flame 25 max. 25 max. SpreadFlammability D-635 — Non- Non- burning burning

Typical Coupon Properties

SCREW LIST FOR FRP SUPPORT: In order of sequence these screws are included as listed below. Fixing of accessories may need others. Study our complete screw list on page 43.

Hexagonal Screw FOR BEAM CLAMP LIGHT

S-M HE-M10 x 50 1371330

Flange Nut FOR HEXAGONAL SCREW

S-M NU-FL-M10 1371973

Hexagonal Screw FOR THE MOST CONNECTIONS

S-M HE-M10 x 30 1371327


S-M NU-FL-M10 1371973

Hexagonal Screw FOR STRINGER BRACKET CROSSWISE

S-M HE-M10 x 70 81396


S-M NU-FL-M10 1371973

Anchor Concrete FOR CONCRETE

S-M AC-10 x 60 1371370

Pan Head with Star and Flange Nuts FOR FIXING CLAMPS

S-M PS-M10 x 20 74145

42

SPECIAL FEATURE: Flange face has a finely serrated surface which offers a more secure locking and improves surface bonding when adhesives are applied.

SPECIAL SCREWS FOR FRP PRODUCTS: Please also study the following page.

Type Where to use Art. no.

Self-Tapping SS Screws FOR END COVER MARUTEX M4.8 x 13 mm 1371373

S-M PS-M10 x 25 FOR FOE-150 & -100 SPLICE PLATES Pan head with star and flange nuts 74139

S-M LS-NU-M6 x16 FOR FTE SPLICE PLATES & FOE COVER Locking sets with pan head and flange nuts 74140

Length Thread Shear (Kgs) Torque Stdr.Type Material Diameter mm Safety Factor = 3 (N-m) packs Art. no.

FRP Threaded Rod

S-FRP TR-M10-1500 FRP M10 1500 240 8 — 71364

TPU Bolts

S-M HE-M10 x 40 TPU 40 LF M10 40 190 6 25 71359

S-M HE-M10 x 40 TPU 26 SF M10 40 140 6 25 71413

TPU Flange Nuts

NU-FL-M10 TPU 40 LF M10 — 250 6 25 71362

NU-FL-M10 TPU 26 SF M10 — 220 6 25 71365

Stud Bolts

S-M HE-M10 x 30 FRP M10 30 240 8 25 71487

S-M HE-M10 x 50 FRP M10 50 240 8 25 71488

S-FRP TR-M10-80 FRP M10 80 240 8 25 71489

SmartLock Insert in SS

for Rung fixing

Metal Pin M8 SS — — — — 25 71354

Optional Bolt Set

S-M HE-M8 x 25 Nylon M8 25 — — 50 71406

S-M NU-M8 Nylon M8 — — — 50 71407

S-M WA-M8 Nylon M8 — — — 100 71408

Channel Nut Heavy DutyFits both CH43 and CH45

S-UNO NU-M10 TPU M10 — — — 25 71551

43Maks tiltrekningsmoment / Max tightening torque for Self-Lock Flange Nuts: M6 = 8-10Nm, M8 = 20-23Nm, M10 = 40-45Nm, M12 = 80-85Nm

PG = 4-7 my zink. HDG = 40-70 my zink. SS = A4-70 (Hex = A4-80)

STD. packs PG. HDG SS PG+HDG / SS Art. no. Art. no. Art. no.M 6 x 12 * S-M LS-NU-M6x12 200 1372750 1371981M 6 x 16 * S-M LS-NU-M6x16 200 84487M 6 x 20 * S-M LS-NU-M6x20 100 1371982M 6 x 30 S-M LS-NU-M6x30 100 1372749 1371361M10 x 20 * S-M LS-NU-M10x20 100 1371983M10 x 25 * S-M LS-NU-M10x25 100 1371980 1371437M10 x 50 S-M LS-NU-M10x50 50 1371589 1371362M 6 x 12 * S-M LS-M6x12 200 1372167 1372161M 6 x 16 * S-M LS-M6x16 200 84493M 6 x 25 DIN 603 S-M LS-M6x25 200 / 100 1372169 1372162M 6 x 50 DIN 603 S-M LS-M6x50 200 / 100 1371360 85520M10 x 20 * S-M LS-M10x20 200 / 100 1372163M10 x 25 * S-M LS-M10x25 100 / 50 1372765 M10 x 30 DIN 603 S-M LS-M10x30 100 / 50 86008 89821M10 x 35 DIN 603 S-M LS-M10x35 100 82709M10 x 50 DIN 603 S-M LS-M10x50 50 89822M10 x 70 DIN 603 S-M LS-M10x70 50 81396M 6 x 12 DIN 933 S-M HE-M6x12 200 1372780M 6 x 16 DIN 933 S-M HE-M6x16 200 1372171 1371318M 6 x 20 DIN 933 S-M HE-M6x20 200 1372172 1371319M 6 x 30 DIN 933 S-M HE-M6x30 200 1371320M 8 x 20 DIN 933 S-M HE-M8x20 200 1371301 1371321M 8 x 25 DIN 933 S-M HE-M8x25 200 1371302 1371322M 8 x 30 DIN 933 S-M HE-M8x30 200 1371303 1371323M10 x 16 DIN 933 S-M HE-M10x16 100 1372178 1371324M10 x 20 DIN 933 S-M HE-M10x20 200 / 100 1371304 1371325M10 x 25 DIN 933 S-M HE-M10x25 200 / 100 1371305 1371326M10 x 30 DIN 933 S-M HE-M10x30 200 / 100 1371306 1371327M10 x 35 DIN 933 S-M HE-M10x35 100 1371307 1371328M10 x 45 DIN 933 S-M HE-M10x45 100 1371308 1371329M10 x 50 DIN 933 S-M HE-M10x50 100 1371309 1371330M10 x 55 DIN 933 S-M HE-M10x55 100 / 50 1371310 1371331M12 x 25 DIN 933 S-M HE-M12x25 100 1371311 1371332M12 x 35 DIN 933 S-M HE-M12x35 100 1371312 1371333M12 x 45 DIN 933 S-M HE-M12x45 100 / 50 1371313 1371334M10 x 40 DIN 933 S-M HE-M10x40 100 1371314 1371335M 6 x 16 DIN 7985 S-M PS-M6x16 200 1372164 1372156M 6 x 20 DIN 7985 S-M PS-M6x20 200 1372842 1372157M 6 x 25 DIN 7985 S-M PS-M6x25 200 84954 1372158 M 6 x 30 DIN 7985 S-M PS-M6x30 200 1372166 1372159 M 6 x 40 DIN 7985 S-M PS-M6x40 100 1372168 1372160Bits conical Torx T30 1371417 6 mm DIN 6923 S-M NU-FL-M6 200 1372843 1371971 8 mm DIN 6923 S-M NU-FL-M8 200 1372831 137197210 mm DIN 6923 S-M NU-FL-M10 200 1372832 1372180 137197312 mm DIN 6923 S-M NU-FL-M12 200 1371343M 6 x 10 DIN 934 S-M NU-M6 100 1372844 1372781M 8 x 13 DIN 934 S-M NU-M8 100 1372176 1371340M10 x 17 DIN 934 S-M NU-M10 100 / 50 1372845 1371341M12 x 19 DIN 934 S-M NU-M12 100 / 50 1372179 1371342 5x30.5x1.5 S-M WA-5x30.5x1.5 200 84394 6x12x1.6 DIN 125 S-M WA-6.4x12x1.6 200 1372782 6x18x1.6 DIN 125 S-M WA-6.4x18x1.6 200 1372175 1371349 6x25x1.5 S-M WA-6x25x1.5 200 1372848 1371350 8x16x1.6 DIN 125 S-M WA-8.4x16x1.6 100 1372849 1371345 1371351 8x40.3x1.5 S-M WA-8x40.3x1.5 200 84345 10.5x20x2 DIN 125 S-M WA-10.5x20x2 100 1372850 1371352 12x24x2.5 DIN 125 S-M WA-13x24x2.5 100 1371346 1371353 7x30.4x1.5 S-M WA-7x30,4x1,5 200 84562 11x32x1 S-M WA-11x32x1 200 1371354 7x35x2 S-M WA-7x35x2 200 1371594 10x(29x33)x3 S-M WA-10x(29x33)x3 200 84110M 6 DIN 6798 S-M SW-M6 200 1372852 1371355M 8 DIN 6798 S-M SW-M8 100 1371356M10 DIN 6798 S-M SW-M10 100 1372854 1371357M12 DIN 6798 S-M SW-M12 100 1371359 1371358M 6 x 40 S-M AC-6x40 100 1372767M 6 x 52 S-M AC-6x52 100 1371368 M 8 x 50 S-M AC-8x50 100 1372768 1371369M 8 x 60 S-M AC-8x60 100 1371364 M10 x 60 S-M AC-10x60 50 1372769 1371365 1371370M10 x 92 S-M AC-10x85 50 1371366 1371371 M12 x 110 S-M AC-12x110 25 89823

i 100-pakn. / SELF-TAPPING SCREWS in packs of 1004,2 x 13mm 32-PH 100 13494174.2 x 14mm 34-PH 100 13728204.2 x 25mm 36-PH 100 1372821

4.8 x 13 mm MARUTEX M4.8x13 SS in A2 quality 100 1371373 4.8 x 25 mm Marutex M4.8x25 SS in A2 quality 100 1371374Bits 1371375

HUSK: Skruer er inkludert! REMEMBER: Screws are included! SKRUER / SCREWS TYPE

LINSESKRUERPAN HEAD SCREWS

Spisset / Cone point

Type codes:

t=

10.5 x 20 x 2

BITS for torx T30 conical

With Torx T30

LÅSESKRUERLOCKING BOLTS

SEKSKANTSKRUERHEXAGONAL BOLTS

SEKSKANTMUTTEREHEXAGONAL NUTS

SKIVER WASHERS

FLENSMUTTEREFLANGE NUTSSelf-Lock only in SS

STJERNESKIVERSTAR WASHERS

LÅSESKRUERLOCKING BOLT SETSm/linsehode og flensmutter With pan head and flange nutsSelf-Lock only in SS

*) Low

EKSPANSJONSBOLTERCONCRETE ANCHOR BOLTS Kvaliteter: V.G. = 5.8Qualities: S.S. = A4-70 P.G. = 5.8

SELVBORENDE SKRUERInntil/Up to 1 mm stålplate/steelplateInntil/Up to 3 mm stålplate/steelplateInntil/Up to 3 mm stålplate/steelplate

For opptil 2.5mm tykkelse For up to 2.5mm thicknessBits for Marutex

SELVBORENDE RUSTFRIE SKRUER / SELF-TAPPING STAINLESS STEEL SCREWS

Lengre utgaver leveres i DIN 931delgjenget.

Longer lengthsin DIN 931 partly threaded.

ODØ

*) Low

High

44

Chemical exposure chartThe information compiled in this exposure chart is related to data collected from actual projects installed in the field. Temperatures used are neither minimum nor maximum but represents a cross section of test conditions. Some products may be suitable for higher temperatures but individual testing should be carried out prior to installation. Please contact Oglaend System for any special applications you may have. RESIN SELECTION

Isophthalic ISOFR Uses modified premium grade Isophthalic polyester resins. Fire retardant and complies with ASTM E 84 and ASTM D635

Vinyl ester VEFR Uses vinyl ester fire retardant resin and complies with ASTM E 84 and ASTM D635

CHEMICAL EXPOSURE CHART

CHEMICAL ISO POLYESTER VINYL ESTER CHEMICAL ISO POLYESTER VINYL ESTERENVIRONMENT % Concentrate Temp °F Wt % Temp°F ENVIRONMENT % Concentrate Temp °F Wt % Temp °F Acetic Acid 10 190 10 210 Lactic Acid SAT 170 SAT 200Acetic Acid 50 125 50 180 Lead Acetate SAT 170 SAT 200Aluminium Chlorine SAT 170 SAT 200 Lead Chloride SAT 140 SAT 200Aluminium Hydroxide SAT 160 SAT 170 Lead Nitrate SAT SAT 200Aluminium Nitrate SAT 150 SAT 170 Linseed Oil 100 150 100 190Aluminium Sulfate SAT 180 SAT 200 Lithium Chloride SAT 150 SAT 190Ammonium Chloride SAT 170 SAT 190 Magnesium Carbonate SAT 140 SAT 170Ammonium Hydroxide 1 100 10 150 Magnesium Chloride SAT 170 SAT 200Ammonium Hydroxide 28 28 100 Magnesium Hydroxide SAT 150 SAT 190Ammonium Carbonate SAT 150 Magnesium Nitrate SAT 140 SAT 180Ammonium Bicarbonate 15 125 SAT 130 Magnesium Sulfate SAT 170 SAT 190Ammonium Nitrate SAT 160 SAT 190 Mercuric Chloride SAT 150 SAT 190Ammonium Persulfate SAT SAT 150 Mercurous Chloride SAT 140 SAT 180Ammonium Sulfate SAT 170 SAT 200 Mineral Oils 100 170 100 200Amyl Alcohol ALL ALL 90 Naptha 100 140 100 170Amyl Alcohol Vapor 140 120 Nickel Chloride SAT 170 SAT 200Benzene Sulfonic Acid 25 110 SAT 200 Nickel Nitrate SAT 170 SAT 200Benzoic Acid SAT 150 SAT 200 Nickel Sulfate SAT 170 SAT 200Benzoly Alcohol 100 100 Nitric Acid 5 140 5 150Borax SAT 170 SAT 200 Nitric Acid 20 70 20 100Calcium Carbonate SAT 170 SAT 200 Oleic Acid 100 170 100 190Calcium Chloride SAT 170 SAT 200 Oxalic Acid ALL 75 ALL 200Calcium Hydroxide 25 70 25 165 Paper Mill Liquors 100 120Calcium Nitrate SAT 180 SAT 200 Perchlorethylene 100 100 80Calcium Sulfate SAT 180 SAT 200 Perchloric Acid 10 150Carbon Disulfide Perchloric Acid 30 80Carbonic Acid SAT 130 SAT 180 Phosphoric Acid 10 160 10 200Carbon Dioxide Gas 200 200 Phosphonic Acid 100 120 100 200Carbon Monoxide Gas 200 200 Potassium Aluminium Sulfate SAT 170 SAT 200Carton Tetrachloride 100 75 Potassium Bicarbonate 50 80 50 140Chlorine, Dry Gas 140 170 Potassium Carbonate 10 10 120Chlorine, Wet Gas Potassium Chloride SAT 170 SAT 200Chlorine Water SAT SAT 90 Potassium Dichromate SAT 170 SAT 200Chromic Acid 5 70 10 120 Potassium Hydroxide 25 150Citric Acid SAT 170 SAT 200 Potassium Nitrate SAT 170 SAT 200Copper Chloride SAT 170 SAT 200 Potassium Permangante SAT 75 SAT 200Copper Cyanide SAT 170 SAT 200 Potassium Sulfate SAT 170 SAT 200Copper Nitrate SAT 170 SAT 200 Propylene Glycol ALL 170 ALL 200Crude Oil, Sour 100 170 100 200 Phthalic Acid SAT 200Cyclohexane, Vapor ALL 100 ALL 130 Sodium Acetate SAT 160 SAT 200Diesel Fuel 100 160 100 180 Sodium Benzoate SAT 170 SAT 200Diethyl Ether Sodium Bicarbonate SAT 160 SAT 175Dimethyl Phthalate 100 80 Sodium Bisulfate ALL 170 ALL 200Ethanol 50 75 50 90 Sodium Bromide ALL 170 ALL 200Ethyl Acetate Sodium Carbonate 10 80 35 160Ethylene Chloride Sodium Chloride SAT 170 SAT 200Ethylene Glycol 100 90 100 200 Sodium Cyanide SAT 170 SAT 200Fatty Acids SAT 180 SAT 200 Sodium Hydroxide 10 150Ferric Chloride SAT 170 SAT 200 Sodium Hydroxide 25 80Ferric Nitrate SAT 170 SAT 200 Sodium Hypochlorite 10 150Ferric Sulfate SAT 170 SAT 200 Sodium Monophosphate SAT 170 SAT 200Ferrous Chloride SAT 170 SAT 200 Sodium Nitrate SAT 170 SAT 200Fluoboric Acid SAT 165 Sodium Sulfate SAT 170 SAT 200Fluosilicic Acid SAT 75 Sodium Thiosulfate ALL 100 ALL 120Formaldehyde 50 75 50 100 Stannic Chloride SAT 160 SAT 190Formic Acid 50 100 Sulfated Detergent 0/50 170 0/50 200Gasoline 100 80 100 150 Sulfur Dioxide 100 80 100 200Glucose 100 170 100 200 Sulfur Trioxide 100 80 100 200Glycerine 100 150 100 200 Sulfuric Acid 93 93 N/RHeptane 100 110 100 120 Sulfuric Acid 50 50 175Hexane 100 90 100 130 Sulfuric Acid 25 75 25 190Hydrobromic Acid 50 120 50 120 Sulfurous Acid 80 Hydrobromic Acid 10 150 10 200 Tartaric Acid 170 200Hydrobromic Acid 20 140 20 190 Tetrachloroethylene Hydrobromic Acid 37 75 37 95 Toluene Hydrobromic Acid 15 80 Trisodium Phosphate SAT 175Hydrogen Bromide, Dry 100 190 100 200 Urea SAT 130 SAT 140Hydrogen Bromide, Wet 100 75 100 130 Vinegar 100 170 100 200Hydrogen Chloride 120 200 Water, Distilled 100 170 100 190Hydrogen Peroxide 30 30 80 Water, Tap 100 170 100 190Hydrogen Sulfide, Dry 140 ALL 180 Water, Salt SAT 170 SAT 190Hydrogen Sulfide, Wet V 140 V 180 Zinc Chloride SAT 170 SAT 200Hypochlorous Acid 10 70 20 100 Zinc Nitrate SAT 170 SAT 200Isopropyl Alcohol 15 80 Zinc Sulfate SAT 170 SAT 200Kerosene 100 140 100 180 LEGEND: SAT - SATURATED, - NOT AVAILABLE, - NOT RECOMMENDED, V - VAPOURS

Storage and Handling Tips

1. FRP/GRP non-metallic cable tray can be stored outdoor but it is always best practice to keep it covered where possible. Product should be elevated off the ground and at an angle to prevent water build-up or other foreign objects staining or bonding to cable ladder.

2. If appearance is important, FRP/GRP products should be stored indoors.

3. FRP/GRP should be kept away from high traffic areas and should be palletized by width and type.

4. If hand unloading, workers should wear gloves and if necessary glasses too.

5. To prevent damages, never pull from the truck by chaining to bottom rung and pulling out of truck as this may cause serious damage.

45

1. Always observe common safety procedures. When a circular power saw is used, always wear safety glasses, suitable dust mask and gloves.

2. Overalls or suitable clothing would also protect the operator during sawing or cutting, machining or sanding operations. Although the dust created is non-toxic and presents no serious health issues, it can cause skin irritation. The amount of irritant varies among different individuals and can be reduced or eliminated by use of protective clothing and/or protective creams.

3. Avoid excessive pressure when sawing or drilling. Excessive force can wear the tooling down (Diamond or carbide grit edged saw blades, carbide tip drill bits are best suited for fiberglass).

4. Refrain from generating excessive heat in any sawing or drilling operation. Excessive heat softens the resin thus resulting in a rough rather

Installation GuidelinesOGLAENDS FRP/GRP system offers the best possible protection for today’s demanding environment. To prolong the service life of the product it should be installed in compliance with the standards set forth by the National Electric Code and NEMA Publications FG-1 (current issue).

than a clean edge. Excessive heat will burn resin and fiberglass.

5. Support the fiberglass profile material rigidly during the cutting or drilling process. Movements may cause chipping at the profile edges.

6. Always touch-up or seal any cut surfaces or edges of the fiberglass shape before installing as this will prolong the service life.

7. When installing cable ladder or tray product from Oglaend, ensure that you use original parts which make up part or all of the main support system, for example splice plates, fittings, fixing clamps and FRP supports. The use of non Oglaend’s product in your management system could affect the loading performance and warranty of the total system.

WARNING! Not to be used as a walkway, ladder or support for personnel. To be used only as a mechanical support for cables and tubing.

Cable ladders are designed as a support for power or control cables, or both and is not intended or designed to be a walkway for personnel.

6. Special care must be taken when slings are used to prevent ladder or tray from crushing as a result of improper handling.

7. Avoid using any chemical cleaning agents to clean the surface of the product. If the products requires cleaning use water first or contact the manufacturer for advice.

8. The recommended number of standard 3m/10ft (long) x 900mm/36” (wide) x 150mm/6” (height) ladder/tray should be 10 per pallet, for 100mm/4” high profile it should be 16 per pallet (Guide only).

9. If you are required to re-band the ladders please exercise care when using steel banding/strapping or use plastic to avoid damaging the product during transit.

46

PRODUCT PORTFOLIOOglaend System offer a broad range of cable support systems for all applications,e.g. cabIe Iadders, cable trays, junction box racks, tubing clamps, cable cleats, heating cables, control systems etc.

If you need further information, please do not hesitate to contact us!

Company presentation

Download our latest version of product catalogues from: www.oglaend-system.com

47

FRP products are stocked in bulk volume at various locations around the world. Contact your nearest office for more details.

SALGSKONTORER LOCATIONS HOLDING COMPANYØglænd Industrier AS P.O. Box 133 NO-4358 Kleppe Tel.: + 47 51 78 81 00 Fax: + 47 51 78 81 60 www.oglaend-system.com

DATTERSELSKAP/SUBSIDIARYNorway Øglænd System ASP.O. Box 133NO-4358 Kleppe Tel.: + 47 51 78 81 00 Fax: + 47 51 78 81 60 Fax sales office: + 47 51 78 81 61 Email: [email protected] www.oglaend-system.com

DenmarkØglænd System ASTel.: + 45 86 88 66 66Fax: + 45 86 88 66 67Email: [email protected]

Dubai (Middle East)Oglaend Industries Middle East Tel.: + 971 4 887 8134Fax: + 971 4 887 8143Mobile: + 971 50 55 86 183Email: [email protected]

MalaysiaOglaend Industries Sdn BhdTel.: + 6 03 51 922 049Fax: + 6 03 51 922 039Mobile: + 6 016 9565 532Email: [email protected]: [email protected]

The Netherlands Oglaend System BV Tel.: + 31 1804 14 204 Fax: + 31 1804 19 395 Email: [email protected]

Russia (St. Petersburg)Oglaend System RussiaTel.: + 7(812) 313 1580Fax: + 7(812) 313 1580Email: [email protected]

Singapore (South East Asia)Oglaend System Singapore Pte. Ltd.Tel.: + 65 67 48 82 78Fax: + 65 67 48 86 15 Email: [email protected]

SwedenÖgländ System ABTel.: + 46 40 45 74 60 Fax: + 46 40 45 67 25 Email: [email protected]

UKOglaend System UK Ltd.Tel.: + 44 121 552 9662Fax: + 44 121 544 6627Email: [email protected]

USAOglaend System USA Tel.: +1 832 288 4452Email: [email protected]

KoreaOglaend System Korea Co LtdTel.: + 82 518 320 761Fax: + 82 518 320 762Email: [email protected]

SALGSKONTORER/SALES OFFICESNorwayØglænd System AS, Division Oslo:Tel.: + 47 22 25 15 10 Fax: + 47 22 25 25 21

Øglænd System AS, Division Ålesund:Tel.: + 47 70 19 09 50 Fax: + 47 70 19 09 51

Øglænd System AS, Division Trondheim:Tel.: + 47 73 80 99 70Fax: + 47 73 80 99 77

AGENTER - FORHANDLERE/AGENTS - DlSTRlBUTORSAbu DhabiProserv Albadie LLCTel.: + 971 26 27 73 70Fax: + 971 29 27 79 72Email: [email protected]

AustraliaJ. T. Day Pty. Ltd.Tel.: + 61 8 9303 2248Fax: + 61 8 9303 2446Email: [email protected]

BrazilM.O.TECH do BrazilTel.: + 55 21 2532 2101Fax: + 55 21 2517 2437Email: [email protected]

Brunei Shinba Integrated Engineering ServicesTel.: + 673 333-1489Fax: + 675 333-6333Email: [email protected]

Canada Apel/CSA Enterprises Tel.: + 1 902 450 5647 Fax: + 1 902 450 5286 Email: [email protected] www.csarep.com

NOSO Ltd.Tel.: + 1 709 782 2645 Fax: + 1 709 782 0534 Email: [email protected] www.noso.ca

FinlandElmarino - Shipping OYTel.: + 358 22 54 61 00Fax: + 358 22 54 62 76

Finn H&T Group OyTel.: + 358 45 630 4004Fax: + 358 3 575 2550Email: [email protected]

IcelandSmith & NorlandTel.: + 354 52 03 000Fax: + 354 52 03 011Email: [email protected]

lndonesiaPT. Multi Tarex MuIia Tel.: + 62 21 3983 5337Fax: + 62 21 3983 5340Email: [email protected] www.multitarex.com

ItalyPiemme Broker S.R.L.Tel.: + 39 02 906 33621Fax: + 39 02 906 32036Email: [email protected]

MalaysiaOffshore Industries Sdn BhdTel.: + 6 03 92 84 0613Fax: + 6 03 92 84 1051Email: [email protected]

PolandNd Service Sp. Z.O.O.Tel.: + 48 665 070 111Email: [email protected]

ThailandProbity International Co Ltd.Tel.: + 66 2 710 6146 Ext. 107Fax: + 66 2 710 6147Email: [email protected]

The Baltic StatesBastini OÜTel.: + 372 660 5811 Fax: + 372 660 5812Email: [email protected]

VietnamMT Corp.Tel.: + 848 821 0373Fax: + 848 821 0358Email: [email protected]

X

*•

X

HEAD OFFICE AND FACTORY

SUBSIDIARIES

AGENTS – DISTRIBUTORS

SALES OFFICES

FABRICATION FACILITIES

*

••

•

•

•

•

•••

•

X

SIMPLY THE BEST! This has been our motto since the company was founded in 1977.

By living up to this motto, we have become the market leader worldwide

in our field.

Oglaend System´s goal is to develop systems that are better, simpler and

more economic.

CG 09.12

Holding company: Øglænd Industrier AS P.O. Box 133, NO-4358 Kleppe. Tel.: +47 51 78 81 00, Fax: (47) 51 78 81 60

Subsidiary (for metallic): Øglænd System ASHead Office factory: P.O. Box 133, NO-4358 Kleppe. Tel.: +47 51 78 81 00, Fax: (47) 51 78 81 60 Fax sales office: +47 51 78 81 61

Subsidiary (for FRP and Metallic): Oglaend Industries Sdn BhdJalan Hulu Tinggi 26/6Section 26, Sector AHicom Industrial Park40400 Shah Alam SelangorMalaysia.Tel.: + 60 3 51 922 049Fax: + 60 3 51 922 039Email: [email protected]

www.oglaend-system.com Email: [email protected]

read image

Documents