rdx 550d-00 表紙 · canon eos rebel t1i / eos 500d canon eos rebel t2i / eos 550d body:...

of 31/31

Post on 20-Aug-2020

2 views

Category:

Documents

0 download

Embed Size (px)

TRANSCRIPT

  • E-7

    Hand strap eyelet

    Mode dial

    Aperture / Exposure compensation button

    Live View shooting / Movie shooting button (*1)

    AE lock / FE lock / Index / Reduce button

    AF point selection /Magnify button

    Rear case

    Main dial

    Shutter lever

    Buckle

    Buckle lock lever

    Hand strap eyelet

    Menu buttonShooting settings display button

    Tripod socket (bottom)

    AF mode selectionbuttonSetting button

    WB selection button

    L-hookViewfinder

    Playback buttonDrive mode selection button

    Erase button

    Front case Port lock

    Port mount ring

    Focus / Zoom dial

    Accessory shoeFiber-optic cable socketPower switch

    *1: It is not be used with EOS REBEL T1i / EOS 500D camera.*2: It controls the Live View shooting / Movie shooting button of the EOS REBEL T1i /

    EOS 500D camera.

    Picture Style selection buttonPressure balance control valve

    Quick control button (*2)

    Identification of Parts

    YS converterconnector

    Buckle

    Buckle locklever

  • E-12

    The "Quick Control button" on the rear case of this product controls the [Live View shooting/ Movie shooting button] of the REBEL T1i / 500D camera. Please place the provided Live View button sticker on the "Quick Control button".

    Place the Live View button sticker on the "Live View shooting/Movie shooting button" when using the REBEL T2i / 550D camera.

    Live View button sticker

    Live View button sticker

    (Red)

    Preparation for Setting Up

    Eliminate any old stains before placing the sticker on the product.

    Live View shooting/Movie shooting buttonPlace sticker

    Place sticker

    Invalid

    Quick Control button ( )

  • 1

    E-14

    OPEN

    LOCK

    Convex part

    Concave part

    Convex part

    Concave part

    2 Align the convex part of the Port with the concave part of the port mount ring, and fully insert the port into the housing

    CAUTION

    Attaching and Detaching the Port

    Release the port lock on the RDX housing (front case) by sliding it in the direction of the arrow as shown in the diagram, and rotate the port mount ring toward OPEN (in a counterclockwise direction) until it stops

    Before attaching the port, make sure there are no specks of dust, scratches, or deformities on the O-ring and the O-ring contact surfaces.

    Port lock

    Slide

    CAUTIONOnly the optional ports designed for SEA&SEA RDX-series housings can

    be attached to this product.This product is delivered with a housing body cap attached to the port mount.

    Make sure to remove the housing body cap when attaching the port.The housing body cap has no watertight capability.When attaching the port to the housing, always refer to the instruction

    manual provided.

    Attaching the port

    In order to use this product underwater, the optional port for the camera lens must be attached to this product.

  • E-17

    Pop up the camera's built-in flash. Align the camera tray with the camera base inside the front case, and slide the camera forward into the front caseMake sure to pop up the built-in flash

    of the camera before mounting the camera in the housing. Once the camera has been mounted, the flash button of the camera cannot be used, and the camera's built-in flash cannot be popped up. Make sure the camera tray is inserted

    all the way into the camera base until it stops.Make sure that the camera tray is

    properly placed and the knob is locked.

    Mounting the Camera in the Housing

    6

    Pull the power switch and focus/zoom dial out

    Make sure that the O-ring is properly fitted in the O-ring groove before setting of the rear case.

    8 Place the rear case on the front case, and close the buckles

    See:“Opening and Closing the Housing” (P. E-13)

    Align the lever of the housing's power switch and the camera's power switch

    7

    After the camera is mounted in the housing, make sure to check that all of the housing's control parts work properly and the camera functions correctly.

    CAUTION

    5

    Power switch

    Lever

  • E-22

    With the YS converter (option)Connect the strobe with the YS converter (option) when the strobe is triggered in conjunction with the camera.

    Align the round mark (or the notch on the tip) of the connecting cable with the round mark (or the convex part inside) of the strobe bulkhead, and then push it straight in

    Remove the connector cap from the YS converter connector

    Make sure there are no scratches or debris on the O-ring of the connecting cable being connected

    1

    2

    3

    Carefully observe the instruction manual for the YS converter before use.A Grip-stay L (option) is required when using the YS converter.Do not connect the strobe and the YS converter connector with a sync cord

    (option) because this will damage the YS converter connector.

    CAUTION

    Connecting cableYS converter connector

    Connecting the Strobe

  • E-26

    External Controls

    Quick control buttonIt controls the Live View shooting / Movie shooting button of the EOS REBEL T1i / EOS 500D camera.

    Live View shooting / Movie shooting buttonIt is not be used with EOS REBEL T1i / EOS 500D camera.

    Other controls

    Other control parts on the housing correspond to the operation parts of the digital camera. Refer to the camera's instruction manual for details of each function.

    CAUTIONAfter mounting the camera in the housing, make sure to check that all of

    the housing's control parts work properly and the camera functions correctly before underwater use.

  • E-30

    ・Release Rubber・Live View button sticker・Silicone grease・O-ring remover・ Attachment tool・Hand strap・O-ring maintenance manual・Instruction manual (this manual)Mounted accessories to the product :・Housing body cap・Fiber-optic cable socket cap (x2)・Converter connector cap

    The specifications and appearance are subject to change without notice.

    Canon EOS REBEL T1i / EOS 500DCanon EOS REBEL T2i / EOS 550D

    Body: Polycarbonate resin (Black)

    60 m (200 feet)

    Approx. 200 (W) × 190 (H) × 139.5 (D) mm (14.2× 8.8 × 6.0 inches)

    Approx. 2000 g (4.4 lbs.) (housing only)

    Compatible camera

    Controls

    Construction

    Depth rating

    Dimensions

    Weight

    Accessories

    Power switch, Main dial, Shutter lever, Focus / Zoom dial, Mode dial, AE lock / FE lock / Index / Reduce button, AF point selection / Magnify button, Live View shooting / Movie shooting button(* 1), Aperture / Exposure compensation button, Quick control button(* 2), WB selection button, AF mode selection button, Setting button, Erase button, Picture Style selection button, Playback button, Drive mode selection button, MENU button, Shooting settings display button

    *1: It is not be used with EOS REBEL T1i / EOS 500D camera.*2: It controls the Live View shooting / Movie shooting button of the EOS REBEL T1i /

    EOS 500D camera.

    Specifications