NIC

PRODUCT LIST

FOR

ELECTRONICS TRAINER

NATIONAL INDUSTRIAL CORPORATION 33, C.R. AVENUE , SUITE NO.301 KOLKATA- 700 012

PH : 033 22110178/9 FAX : 033 22110213, E-mail : nicindia@vsnl.net

NIC

ST -100 SERIES ELECTRONICS DEVICES CHARACTERISTICS

1. PN Junction Diode Characteristics(Make: R & D Electronics, Model: ST-101)Built in 0 to +12V @ 250mA Variable Voltage Source,18V @ 50Hz AC Source,Diode (Germanium &  Silicon),Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points.Set of Patch Chords & Experimental Manual.

(a) PN Junction Diode Characteristics with Meters(Make: R & D Electronics, Model: ST-101M)Built in 0 to +12V @ 250mA Variable Voltage Source,18V @ 50Hz AC Source,Diode (Germanium & Silicon),Analog Meters,Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points.Set of Patch Chords & Experimental Manual.

2. Zener Diode Characteristics(Make: R & D Electronics, Model: ST-102)Built in 0 to +12V @ 250mA Variable Voltage Source,18V @ 50Hz AC Source,Zener Diodes (4.5V, 5.1V),Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

(a) Zener Diode Characteristics with Meter(Make: R & D Electronics, Model: ST-102M)Built in 0 to +12V @ 250mA Variable Voltage Source,18V @ 50Hz AC Source,Zener Diodes (4.5V, 5.1V),Analog meters,Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

3. Diode & Zener Diode Characteristics(Make: R & D Electronics, Model: ST-103)Built in 0 to +12V @ 250mA Variable Voltage Source,18V @ 50Hz AC Source,Diodes (Germanium, Silicon & Zener diodes),Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

(a) Diode & Zener Diode Characteristics with Meter(Make: R & D Electronics, Model: ST-103M)Built in 0 to +12V @ 250mA Variable Voltage Source,18V @ 50Hz AC Source,Diodes (Germanium, Silicon, Zener diodes),Analog metersAssembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

4.Transistor Characteristics (CE, CB, CC)(Make: R & D Electronics, Model: ST-104)Built in 0 to +12V @ 250mA Dual Variable Voltage Source,Transistor (BC 107),Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

(a) Transistor Characteristics (CE, CB, CC) with Meters(Make: R & D Electronics, Model: ST-104M)Built in 0 to +12V @ 250mA Dual Variable Voltage Source,Transistors (SL100 & SK100),Analog meters,Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

NIC

5. FET Characteristics (Make: R & D Electronics, Model: ST-105)Built in 0 to +12V @ 250mA Variable Voltage Source,FET (BFW11),Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

(a) FET Characteristics with Meters(Make: R & D Electronics, Model: ST-105M)Built in 0 to +12V @ 250mA Variable Voltage Source,FET (BFW11),Analog meters,Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

6. MOSFET Characteristics    (Make: R & D Electronics, Model: ST-106)  Built in Variable +5V & +12V @ 250mA DC Power Supply,MOSFET (3N187),Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of patch Chords & Experimental Manual.

(a) MOSFET Characteristics with Meter

(Make: R & D Electronics, Model: ST-106M)Built in Variable +5V & +12V @ 250mA DC Power Supply,MOSFET (3N187),Analog meters,Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of patch Chords & Experimental Manual.

7. SCR Characteristics                    (Make: R & D Electronics, Model: ST-107)Built in Dual 1.2 to +14 V @ 250mA Variable DC Power Supplies,SCR (TYN604),Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual

(a) SCR Characteristics with Meters(Make: R & D Electronics, Model: ST-107M)Built in Dual 1.2 to +14 V @ 250mA Variable DC Power Supplies,SCR (TYN604),Analog meters,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual

8. DIAC Characteristics                  (Make: R & D Electronics, Model: ST-108)Built in 1.2 to 45 V @ 250mA Variable Power Supplies, DIAC (D32),36V @ 50Hz Ac Source,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

(a) DIAC Characteristics with Meter(Make: R & D Electronics, Model: ST-108M)Built in 1.2 to 45 V @ 250mA Variable Power Supplies, DIAC (D32),36V @ 50Hz Ac Source,Analog meters,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to

NICmeasure the Voltage,Set of Patch Chords & Experimental Manual.

9. TRIAC Characteristics                (Make: R & D Electronics, Model: ST-109)Built in Dual 1.2 to 14 V @ 250mA Variable DC Power Supply,TRIAC (BT136), Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

(a) TRIAC Characteristics with Meter(Make: R & D Electronics, Model: ST-109M)Built in Dual 1.2 to 14 V @ 250mA Variable DC Power Supply,TRIAC (BT136), Analog meters,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

10. DIAC & TRIAC Characteristics   (Make: R & D Electronics, Model: ST-110)1.2  to 14V @ 250mA & 1.2 to 45V @ 250mA Variable Power Supplies,36V @ 50Hz Ac Source,TRIAC (BT136) and DIAC (D32),Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual

(a) DIAC & TRIAC Characteristics with Meters                (Make: R & D Electronics, Model: ST-110M)0 to 14V @ 250mA & 1.2 to 45V @ 250mA Variable Power Supplies,36V /50Hz Ac Source,TRIAC (BT136) and DIAC (D32),Analog meters,Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual

11. UJT Characteristics & UJT Relaxation Oscillator(Make: R & D Electronics, Model: ST-111)Built in 1.2 to 14 V @ 250mA DC Variable Power Supply,UJT (2N2646),Different timing capacitors,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual

(a) UJT Characteristics & UJT Relaxation Oscillator with Meters(Make: R & D Electronics, Model: ST-111M)Built in 1.2 to 14 V @ 250mA DC Variable Power Supply,UJT (2N2646),Different timing capacitors,Analog meters,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual

12. Thermistor Characteristics        (Make: R & D Electronics, Model: ST-112)Built in  +12V @ 250mA Variable Power Supply,Thermistor,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

(a) Thermistor Characteristics with Meters(Make: R & D Electronics, Model: ST-112M)Built in +12V @ 250mA Variable Power Supply,Thermistor,Analog meters,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to

NICmeasure the Voltage,Set of Patch Chords & Experimental Manual.

13. LDR Characteristics                    (Make: R & D Electronics, Model: ST-113)Built in 1.2 to 14V @ 250mA Variable Power Supplies,LDR, Variable Intensity Light Source,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

(a) LDR Characteristics with Meters(Make: R & D Electronics, Model: ST-113M)Built in 1.2 to 14V @ 250mA Variable Power Supplies,LDR,Variable Intensity Light Source,Analog meters,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

14. Photo Diode Characteristics  (Make: R & D Electronics, Model: ST-114)Built in 1.2 to 14V @ 250mA Variable Power Supply,Variable Intensity Light Source,Photo Diode, Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,    Set of Patch Chords & Experimental Manual.

(a) Photo Diode Characteristics with Meters(Make: R & D Electronics, Model: ST-114M)Built in 1.2 to 14V @ 250mA Variable Power Supply,Variable Intensity Light Source,Photo Diode,Analog meters, Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,    Set of Patch Chords & Experimental Manual.

15. Photo Transistor Characteristics     (Make: R & D Electronics, Model: ST-115)Built in 1.2 to 14V @ 250mA variable Power Supply,Variable Intensity Light source,Photo Transistor,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

(a) Photo Transistor Characteristics with Meter(Make: R & D Electronics, Model: ST-115M)Built in 1.2 to 14V @ 250mA variable Power Supply,Variable Intensity Light source,Photo Transistor,Analog meters,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

16. V D R Characteristics   (Make: R & D Electronics, Model: ST-116)Built in +12V @ 250mA DC Power Supply,Variable Load Resistors,1W solar panel,Electronic Load,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to

NICmeasure the Voltage,Set of Patch Chords & Experimental Manual.

(a) V D R Characteristics with Meters(Make: R & D Electronics, Model: ST-116M)Built in +12V @ 250mA DC Power Supply,Variable Load Resistors,1W solar panel,Electronic Load,Analog meters,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

          

17. LED Characteristics                    (Make: R & D Electronics, Model: ST-117)Built in + 12V @ 250mA Variable DC Power Supply,LED,Resistors,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of patch Chords & Experimental Manual.

(a) LED Characteristics with Meters(Make: R & D Electronics, Model: ST-117M)Built in + 12V @ 250mA Variable DC Power Supply,LED,Resistors,Analog meters,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of patch Chords & Experimental Manual.

18. Opto Coupler Characteristics     (Make: R & D Electronics, Model: ST-118)Built in +5V, & + 12V @ 250mA DC Power Supply,Opto-Coupler (MC-T2E),Clock Generator (555),Buffer (741),Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of patch Chords & Experimental Manual.

(a) Opto Coupler Characteristics with Meters                  (Make: R & D Electronics, Model: ST-118M)Built in +5V, & + 12V @ 250mA Variable DC Power Supplies,Opto-Coupler (MC-T2E),Analog meters,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of patch Chords & Experimental Manual.

19. Semiconductor Devices Characteristics Trainer (All Devices)(Make: R & D Electronics, Model: ST-119)Built in 1.2 to 45V @ 250mA DC Variable Voltage Source,(0 to 15V) Dual Variable Voltage,Components Like: - DIODE, ZENER DIODE, TANSISTORS (NPN, PNP), FET, MOSFET, SCR, DIAC, TRIC, UJT, THERMISTOR, LDR, PHOTODIODE, PHOTOTRANSISTOR, LED, OPTO COUPLER. Current Limiting Pots,Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of patch Chords & Experimental Manual.

NIC 

   

20. Study of Diodes                                (Make: R & D Electronics, Model: ST-120)Built in 0 to +12V @ 250mA Variable DC Power Supply,16V @ 50Hz Ac Source,Diode (Si, Ge, Zener),Inductors,Capacitors,Resistors, Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of patch Chords & Experimental Manual.

(a) Study of Diodes with Meters(Make: R & D Electronics, Model: ST-120M)Built in 0 to +12V @ 250mA Variable DC Power Supply,16V @ 50Hz Ac Source,Diode (Si, Ge, Zener),Inductors, Capacitors, and Resistors, Analog meters,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of patch Chords & Experimental Manual.

21 JFET & MOSFET Characteristics(Make: R & D Electronics, Model: ST-121)Built in +/- 5V & +/-12 V @ 250mA DC Power Supplies,MOSFET (3N187),FET (BFW11),Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of patch Chords & Experimental Manual

(a) JFET & MOSFET Characteristics with Meters(Make: R & D Electronics, Model: ST-121M)Built in +/- 5V & +/-12 V @ 250mA DC Power Supplies,MOSFET (3N187),FET (BFW11),Analog meters,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of patch Chords & Experimental Manual

22. Series Voltage Regulator                 (Make: R & D Electronics, Model: ST-122)Built in 1.2 to 14V @ 250mA Variable DC Voltage Source,Series Voltage Regulator,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of patch Chords & Experimental Manual.

(a) Series Voltage Regulator with Meters(Make: R & D Electronics, Model: ST-122M)Built in 1.2 to 14V @ 250mA Variable DC Voltage Source,Series Voltage Regulator,Analog meters,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of patch Chords & Experimental Manual.

    

NIC

23 Shunt Voltage Regulator                 (Make: R & D Electronics, Model: ST-123)Built in 1.2 to 14V @ 250mA Variable DC Voltage Source,Shunt Voltage Regulator,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of patch Chords & Experimental Manual.

(a) Shunt Voltage Regulator with Meters(Make: R & D Electronics, Model: ST-123M)Built in 1.2 to 14V Variable DC Voltage Source,Shunt Voltage Regulator,Analog meters,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of patch Chords & Experimental Manual.

24 Series Shunt Voltage Regulator(Make: R & D Electronics, Model: ST-124)Built in 1.2 to 14V @ 250mA Variable DC Voltage Source,Series Voltage Regulator,Shunt Voltage Regulator,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of patch Chords & Experimental Manual.

(a) Series Shunt Voltage Regulator with Meter(Make: R & D Electronics, Model: ST-124M)Built in 1.2 to 14V @ 250mA Variable DC Voltage Source,Series  & Shunt Voltage Regulators,Analog meters,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of patch Chords & Experimental Manual.

25 Zener Shunt Voltage Regulator(Make: R & D Electronics, Model: ST-125)1.2 V to 14 V @ 250mA Variable DC Voltage Source,Zener 5.1V, Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of patch Chords & Experimental Manual.

(a) Zener Shunt Voltage Regulator with Meter(Make: R & D Electronics, Model: ST-125M)1.2 V to 14 V @ 250mA Variable DC Voltage Source,Zener diode 5.1V, Analog meters,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of patch Chords & Experimental Manual.

26 Voltage Regulator Using IC 723(Make: R & D Electronics, Model: ST-126)Built in 1.2 to 14V @ 250mA Variable DC Voltage Source,IC Regulator 723,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of patch Chords & Experimental Manual.

NIC

AMT 200 SERIES: AMPLIFIER CIRCUITS

1 Measurements of Transistor h-Parameters(Make: R & D Electronics, Model: AMT-201)Built in +12 V @ 250mA Dual Variable Power Supply,NPN Transistor ,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

2 Transistor Biasing Methods (Fixed Bias, Emitter Bias)(Make: R & D Electronics, Model: AMT-202)Built in +12 V @ 250mA DC Power Supply,NPN Transistor,Biasing Networks,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

3 Single Stage RC Common Emitter Transistor Amplifier.(Make: R & D Electronics, Model: AMP-203)Built in +12 V @ 250mA DC Power Supply,Transistor CE Amplifier,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

4 Darlington Transistor Amplifier(Make: R & D Electronics, Model: AMT-204)Built in +12 V @ 250mA DC Power Supply,2 Transistors Darlington Configuration,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

5 Class A Power Amplifier                  (Make: R & D Electronics, Model: AMT-205)Built in + 12V @ 250mA DC Power Supply,Class A Transistor power Amplifier,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

6 Class B Push-Pull Power Amplifier(Make: R & D Electronics, Model: AMT-206)Built in +12V @ 250mA DC Power Supply,Class B Push Pull Amplifier,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

          

7 Class C Power Amplifier                   (Make: R & D Electronics, Model: AMT-207)Built in +/-12V @ 250mA DC Power Supply,Class C Power Amplifier,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

8 Class A, B, C, & AB Amplifier(Make: R & D Electronics, Model: AMT-208)Built in +/- 12V @ 250mA DC Power Supply,Transistor Amplifier (BC107),Adjustable Biasing Network,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

NIC

9Two Stage RC Coupled Amplifier(Make: R & D Electronics, Model: AMT-209)Built in + 12V @ 250mA DC Power Supply,Two Stage Transistor CE amplifier,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

10 Two Stage Transformer Coupled Amplifier(Make: R & D Electronics, Model: AMT-210)Built in +12V @ 250mA DC Power Supply,Two Stage amplifier,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

11 Two Stage RC Coupled Amplifier Using FET(Make: R & D Electronics, Model: AMT-211)Built in + 12V @ 250mA DC Power Supply,Two stage FET amplifier,,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

12 Two Stage Direct Coupled Amplified(Make: R & D Electronics, Model: AMT-212)Built in +12V @ 250mA DC Power Supply,Two stage Direct coupled amplifier,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

      

13 Emitter Coupled Differential Amplifier(Make: R & D Electronics, Model: AMT-213)Built in + 12V @ 250mA Dual DC Power Supply,Emitter coupled  Differential Amplifier,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

14 Amplifiers (Voltage Series, Voltage Shunt, Current Series and Current Shunt)(Make: R & D Electronics, Model: AMT-214)Built in +12V @ 250mA DC Power Supply,Voltage Series feedback amplifier,Voltage Shunt feed back amplifier,Current Series feedback amplifier,Current Shunt feedback amplifier,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

15 Complimentary Symmetry Circuit(Make: R & D Electronics, Model: AMT-215)Built in + / - 5V @ 250mA DC power Supply,Complimentary Symmetry circuit,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

16 AF Tuned Collector Amplifier(Make: R & D Electronics, Model: AMT-216)Built in + 12V @ 250mA DC power SupplySingle stage Collector Tuned Transistor Amplifier,Three Capacitor for Tuning purpose,Assembled in Metsal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

NIC

17 Single Stage RC Coupled Amplifier Using FET(Make: R & D Electronics, Model: AMT-217A)Built in + 12V @ 250mA DC power Supply, Single Stage FET Amplifier,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

18 Study of Emitter Follower (CC Amplifier)(Make: R & D Electronics, Model: AMT-218)Built in + 12V @ 250mA DC power Supply,Emitter Follower circuit,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,                    Set of Patch Chords & Experimental Manual.

         

19 Trainer to Study Devices Characteristics and Amplifier Circuits (Using Discrete Components)(Make: R & D Electronics, Model: AMT-219)Built in + 12V @ 250mA DC power Supply,Discrete components,Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

20 Study of IF Amplifier                        (Make: R & D Electronics, Model: AMT-220)Built in + 12V @ 250mA DC power Supply,Collector Tuned IF Amplifier (455 KHz),Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

21 FET Amplifier(Make: R & D Electronics, Model: AMT-221)Built in + 12V @ 250mA DC power Supply,FET Amplifier,Assembled in Metal/ Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual

NIC

OS-300 SERIES OSCILLATORS, WAVE SHAPING CIRCUITS & MULTIVIBRATORS

1 Oscillator Trainer Wein Bridge, Hartley, Colpitts, Crystal & RC Phase Shift Oscillator(Make: R & D Electronics, Model: OS-301)Built in +12V @ 250mA DC Power Supply,Tank circuits for weinbridge, Hartley, Colpitts, Crytal and Phase shift Oscillators,Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

2 Hartley Oscillator                             (Make: R & D Electronics, Model: OS-302)Built in +12V @ 250mA DC Power Supply,Transistor Hartley oscillator,2 Sets of Inductors,Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

3 Colpitts Oscillator                             (Make: R & D Electronics, Model: OS-303)Built in +12V @ 250mA DC Power Supply,Transistor Coli Pitts Oscillator,2 Sets of Capacitors,Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

4 Crystal Oscillator                              (Make: R & D Electronics, Model: OS-304)Built in +12V @ 250mA DC Power Supply,Transistor Crystal Oscillator(1MHz),Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

5 RC Phase Shift Oscillator (Transistor Version)(Make: R & D Electronics, Model: OS-305)Built in +12V @ 250mA DC Power Supply,Transistor Phase Shifter,Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

6 Wein Bridge Oscillator (Transistor Version.)(Make: R & D Electronics, Model: OS-306)Built in +12V @ 250mA DC Power Supply,Wein Bridge Oscillator,Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

7 Tuned Collector Oscillator               (Make: R & D Electronics, Model: OS-307)Built in +12V @ 250mA DC Power Supply,Tuned Collector Oscillator,Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

         

NIC

8 Blocking Oscillator                           (Make: R & D Electronics, Model: OS-308)Built in +12V @ 250mA DC Power Supply,Transistor Blocking Oscillator,Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

9 Schmitt Trigger Circuit Oscillator    (Make: R & D Electronics, Model: OS-309)Built in +/-12V @ 250mA DC Power Supply,Variable amplitude Sine wave generator,Schmitt Trigger circuit,Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

10 Ramp Generator Using Transistor   (Make: R & D Electronics, Model: OS-310)Built in +/-12V @ 250mA DC Power Supply,Transistor Ramp Generator circuit,Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

11 Clipping & Clamping Circuits

(Make: R & D Electronics, Model: OS-311)   Built in +/-5V, +/-2V & +/-1V @ 250mA DC Power Supply,Diode Clipper circuits,Diode Clamper circuits,Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

12 Boot Strap Sweep Generator           (Make: R & D Electronics, Model: OS-312)Built in +/-12V @ 250mA DC Power Supply,Transistor Boot Strap Sweep generator,Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

13 Miller Sweep Generator                   (Make: R & D Electronics, Model: OS-313)Built in +12 V @ 250mA DC Power Supply,Transistor Miller Sweep Generator,Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

14 8038 As Wave Form Generator        (Make: R & D Electronics, Model: OS-317)Built in +/-12V @ 250mA DC Power Supply,8038 Function Generator (Sine/Square/ Triangle waveforms),Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

     

NIC15 566 As Wave Form Generator

(Make: R & D Electronics, Model: OS-318)   Built in +/-12V @ 250mA DC Power Supply,566 Square & Triangle wave form Generator,Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

16 2206 As Wave Form Generator        (Make: R & D Electronics, Model: OS-319)Built in +/-12V @ 250mA DC Power Supply,2206 wave form generator circuit,Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

17 Astable Multivibrator (Transistor Version)(Make: R & D Electronics, Model: OS-320)Built in +12V @ 250mA DC Power Supply,Transistor astable Multivibrator,Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

18 Bistable Multivibrator (Transistor Version) (Make: R & D Electronics, Model: OS-321)Built in +/-12V @ 250mA DC Power Supply,Transistor Bistable Multivibrator, Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

19 Monostable Multivibrator (Transistor Version)(Make: R & D Electronics, Model: OS-322)Built in +/-12V @ 250mA DC Power Supply, Transistor Monstable Multivibrator,Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

20 Multivibrators Trainer  (Astable, Bistable & Monostable) (Transistor Version) (Make: R & D Electronics, Model: OS-323)Built in +/-12V @ 250mA DC Power Supply,Transistor Astable multivibrator,Transistor Bistable multivibrator,Transistor Monostable multivibrator,Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

21 Astable Multivibrator (Op-Amp Version)(Make: R & D Electronics, Model: OS-324)Built in +/-12V @ 250mA DC Power Supply, 741 Astable Multivibrator, Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

    

NIC22 Bistable Multivibrator (Op-Amp Version)

(Make: R & D Electronics, Model: OS-325)Built in +/-12V @ 250mA DC Power Supply,741 Bistable Multivibrators, Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

23 Monostable Multivibrator (Op-Amp version)                    (Make: R & D Electronics, Model: OS-326)Built in +/-12V @ 250mA DC Power Supply, 741 Monostable Multivibrators,Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual

24 Multivibrators Trainer (Astable, Bistable, Monostable) (Op Amp Version)(Make: R & D Electronics, Model: OS-327)Built in +/-12V @ 250mA DC Power Supply,Op amp Astable multivibrator,Op amp Bistable multivibrator,Op amp Monostable multivibratorAssembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

25 Timer Circuits Using 555 (Astable & Monostable Multivibrators)(Make: R & D Electronics, Model: OS-328)Built in +12V @ 250mA DC Power Supply,555  Astable Multivibrator,555 Monostable Multivibrator,Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

26 555 Timer Trainer                            (Make: R & D Electronics, Model: OS-329)Built in +/-12V @ 250mA DC Power Supply,555 Timer ICs,                     (2 Nos.)Resistors,                            (2 Nos.)Capacitors,                          (2 Nos.)Transistors,                         (2 Nos.)Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

27 Multivibrators Using Digital Gates and 74121(Astable, Bistable & Monostable) (Make: R & D Electronics, Model: OS-330)Built in +/-5V @ 250mA DC Power Supply,7400,                                  (2 Nos.)74121,                                (2 Nos.)Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

28 Astable & Monostable Multivibrator Using IC4047(Make: R & D Electronics, Model: OS-331)Built in +12V @ 250mA DC power Supply,4047 Astable multivibrator,4047 Monostable Multivibrator,Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of patch Chords & Experimental Manual.

NIC29 Long Duration Timer Using CD 4060 IC

(Make: R & D Electronics, Model: OS-333)Built in +12V @ 250mA DC power Supply,Long Duration Using CD 4060IC,Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of patch Chords & Experimental Manual.

30 Clapp Oscillator                                (Make: R & D Electronics, Model: OS-334)Built in +12V @ 250mA DC Power Supply,Clapp Oscillator,Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

31 Twin-T Oscillator                              (Make: R & D Electronics, Model: OS-335)Built in +12V @ 250mA DC Power Supply,Twin-T Oscillator,Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

32 Pierce Oscillator                               (Make: R & D Electronics, Model: OS-336)Built in +12V @ 250mA DC Power Supply,Pierce Oscillators,Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

NIC

NTT- 400: SERIES NETWORK ANALYSIS, THEOREMS & FILTERS

1 Thevenins & Norton’s Theorems      (Make: R & D Electronics, Model: NTT-401)Built in 1.2 to 12V @ 250mA DC Variable Power SupplyResistor networks.Variable Voltage source (1.2 to 12V)Variable Current source (1mA to 25mA)Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

(a) Thevenins & Norton’s Theorems with Meters(Make: R & D Electronics, Model: NTT-401M)Built in 1.2 to 12V @ 250mA DC Variable Power SupplyVariable Current source (1mA to 25mA)Resistor networksAnalog metersAssembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

2 Reciprocity Theorem                        (Make: R & D Electronics, Model: NTT-402)Built in + 12V @ 250mA Variable DC Power SupplyResistor networksAssembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual

(a) Reciprocity Theorem with Meters(Make: R & D Electronics, Model: NTT-402M)Built in + 12V @ 250mA Variable DC Power SupplyResistor networksAnalog metersAssembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual

3 Super Position Theorem                  (Make: R & D Electronics, Model: NTT-403)Built in 1.2 to 14V @ 250mA Dual DC Variable Power Supply Resistor networks.Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

(a) Super Position Theorem with Meters(Make: R & D Electronics, Model: NTT-403M)Built in 1.2 to 14V @ 250mA Dual DC Variable Power Supply Resistor networks.Analog metersAssembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

         

NIC

4 Maximum Power Transfer Theorem                                  (Make: R & D Electronics, Model: NTT-404)Built in + 5V @ 250mA DC Power SupplyResistor networkVariable Load ResistorAssembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

(a) Maximum Power Transfer Theorem with Meters(Make: R & D Electronics, Model: NTT-404M)Built in + 5V @ 250mA DC Power SupplyResistor networkVariable Load ResistorAnalog metersAssembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

5 Miller’s Theorem                              (Make: R & D Electronics, Model: NTT-405)Built in + 12V @ 250mA DC Power SupplyTransistor based Miller CircuitAssembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual

(a) Miller’s Theorem with Meters(Make: R & D Electronics, Model: NTT-405M)Built in + 12V @ 250mA DC Power SupplyTransistor based Miller CircuitsAnalog metersAssembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual

6 Kirchoff`s Law                                  (Make: R & D Electronics, Model: NTT-406)Built in + 5V @ 250mA DC Power SupplyResistor networks.Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual

(a) Kirchoff`s Law with Meters(Make: R & D Electronics, Model: NTT-406M)Built in + 5V @ 250mA DC Power SupplyResistor networks.Analog metersAssembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual

         

7 Ohms Law(Make: R & D Electronics, Model: NTT-407)Built in 1.2 to 14V @ 250mA DC Variable Power SupplyResistor networks.Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

(a) Ohms Law with Meters(Make: R & D Electronics, Model: NTT-407A)Built in 1.2 to 14V @ 250mA DC Variable Power SupplyResistor networks.Analog metersAssembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

NIC8 Series & Parallel Resonance           

(Make: R & D Electronics, Model: NTT-408)Series and Parallel Resonant circuitAssembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

9 Study of Constant-K Type Filters     (LPF, HPF, BPF, BSF)(Make: R & D Electronics, Model: NTT-409)Constant-k low Pass filterConstant-k High Pass filterConstant-k Band Pass filterConstant-k Band Stop filterAssembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

10 Study of M-Derived Filters               (LPF, HPF, BPF, BSF)(Make: R & D Electronics, Model: NTT-410)M-derived low Pass filterM-derived High Pass filterM-derived Band Pass filterM-derived Band Stop filterAssembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

11 Study of Composite Low Pass Filter (Make: R & D Electronics, Model: NTT-411)Composite Low Pass filterAssembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

 

12 Study of Composite High Pass Filter                            (Make: R & D Electronics, Model: NTT-412)Composite High Pass filterAssembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

13 Study of Composite Band Pass Filter                           (Make: R & D Electronics, Model: NTT-413)Composite Band Pass filterAssembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

14 Study of Composite Band Stop Filter(Make: R & D Electronics, Model: NTT-414)Composite Band Stop filterAssembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual

15 Study of Composite Low Pass & High Pass Filters(Make: R & D Electronics, Model: NTT-415)Composite Low Pass filterComposite High Pass filterAssembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual

NIC

16 Study of Composite Band Pass & Band Stop Filters(Make: R & D Electronics, Model: NTT-416)Composite Band Pass filterComposite Band Stop filterAssembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

17 Active Filters Trainer (LPF, HPF, BPF, & BSF)(Make: R & D Electronics, Model: NTT-417)Built in +/- 12V @ 250mA DC Power Supply Active Low Pass filterActive High Pass filterActive Band Pass filterActive Band Stop filterAssembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

18 Lattice Filters                             (Make: R & D Electronics, Model: NTT-418)Lattice Filters Circuit Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of patch Chords & Experimental Manual.

    

19 Butter-Worth Filter (I, II, III, Order)                                 (Make: R & D Electronics, Model: NTT-419)Built in + 12V / 350mA DC power SupplyButter-Worth Filter CircuitAssembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of patch Chords & Experimental Manual.

20 Chebyshev Filters (I, II, III Order)   (Make: R & D Electronics, Model: NTT-420)Built in + 12V / 350mA DC power SupplyChebyshev Filters CircuitAssembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of patch Chords & Experimental Manual.

21 Study of Different Type of Rectifiers & Filters(Half Wave, Full Wave & Bridge Type With /Without Capacitor /TT Filters)(Make: R & D Electronics, Model: NTT-421)8-0-8V @ 50Hz AC sourceHalf wave, Full wave & Bridge rectifiersFilter sectionsAssembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

21A Rectifiers, Filters and Rectifiers(Make: R & D Electronics, Model: NTT-421A)8-0-8 AC sourceHalf wave, Full wave & Bridge rectifiersFilter sectionsAssembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

22 Study of Phase Splitter                    (Make: R & D Electronics, Model: NTT-422)Built in +12V @ 250mA DC Power SupplyPhase Splitter circuitAssembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

NIC23 Phase Difference in L.C.R Circuit    

(Make: R & D Electronics, Model: NTT-423)Built in + / -12V @ 250mA DC Power SupplyL.C.R. CircuitSine Wave GeneratorAssembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

    

24 Transient Response of an RLC Circuit (Make: R & D Electronics, Model: NTT-424)Built in + 12V @ 250mA DC Power SupplyVariable frequency Square waveL, R & C CircuitVariable frequency Square Wave Generator Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

25 RL & RC Differentiation Integration (Make: R & D Electronics, Model: NTT-425)Built in + 12V / 350mA. DC Power SupplyVariable frequency Square Wave GeneratorRL & RC CircuitAssembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of Patch Chords & Experimental Manual.

26 B-H Curve & Hysterics Loop             (Make: R & D Electronics, Model: NTT-426)Built in 18V @ 50Hz AC Voltage Source18V to 18V 1:1 transformerProvision to observe the B.H curve on CRO in x-y ModeTransformer Core (Magnetic) & Components Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of patch Chords & Experimental Manual.

27 Loop & Nodal Analysis                     (Make: R & D Electronics, Model: NTT-427)Dual 1.2V to 14V @ 250mA Variable DC Voltage Source 1mA to 25mA Variable D.C Current SourceResistor bank to study Network TheoremsAssembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of patch Chords & Experimental Manual.

28 Study of Twin-T Network Characteristics(Make: R & D Electronics, Model: NTT-428)Twin-T Network Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of patch Chords & Experimental Manual.

   

29 Two Port Network Parameters        (Make: R & D Electronics, Model: NTT-429)1.2V to 14V @ 250mA Variable DC Voltage SourceResistive T and NetworksAssembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of patch Chords & Experimental Manual.

NIC

(a) Two Port Network Parameters with Meters(Make: R & D Electronics, Model: NTT-429M)1.2V to 14V @ 250mA Variable DC Voltage SourceResistive T and NetworksAnalog metersAssembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of patch Chords & Experimental Manual.

30 Cascaded Two Port Networks          (Make: R & D Electronics, Model: NTT-430)1.2V to 14V @ 250mA Variable DC Voltage SourceTwo Resistive T-NetworkCascaded Two Port NetworkAssembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of patch Chords & Experimental Manual.

(a) Cascaded Two Port Networks with Meters(Make: R & D Electronics, Model: NTT-430M)1.2V to 14V @ 250mA Variable DC Voltage SourceCascaded Two Port NetworkAnalog metersAssembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of patch Chords & Experimental Manual.

31 Tellegen’s Theorem                         (Make: R & D Electronics, Model: NTT-431)Built in + 12V @ 250mA Fixed DC Voltage SourceResistors Bank to Construct Closed CircuitAssembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of patch Chords & Experimental Manual.

(a) Tellegen’s Theorem with Meters(Make: R & D Electronics, Model: NTT-431M)Built in + 12V @ 250mA Fixed DC Voltage SourceResistors Bank to Construct Closed CircuitAnalog metersAssembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of patch Chords & Experimental Manual.

32 Star-Delta Transformation              (Make: R & D Electronics, Model: NTT-432)1.2V to 14V @ 250mA Variable DC Voltage SourceResistive T and Networks,Star-Delta TransformationAssembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of patch Chords & Experimental Manual.

33 T & p Attenuators                            (Make: R & D Electronics, Model: NTT-433)1.2V to 14V @ 250mA Variable DC Voltage SourceResistive T and NetworksAssembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of patch Chords & Experimental Manual.

34 Voltage Multipliers(Make: R & D Electronics, Model: NTT-434)Built in 9V @ 50Hz AC Voltage source.Voltage Doublers,Voltage Tripler,Voltage Quadrupler,Assembled in Metal / Wooden Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltage,Set of patch Chords & Experimental Manual.

NIC

1.

DET- 500: SERIES DIGITAL ELECTRONICS TRAINERSDigital IC Trainer-I Full System: (Gates, FF’S, counters)(Make: R & D Electronics, Modal: DET –501)+5V @ 1A DC power SupplyQuad 2-Input NAND Gate      (7400)Quad 2-Input NOR Gate (7402)Quad 2-Input AND Gate (7408)Quad 2-Input OR Gate    (7432)Hex Inverters (7404)Dual 4-Input NAND Gate  (7420)Dual 4-Input NOR Gate (7425)Dual 2-Ex-OR Gate  (7486)Dual JK Flip Flop (7476)4-Bit R /L Shift Register  (7495)Up / Down Binary Counter  (74193)4-Bit Binary Full Adder  (7483)4-Bit Magnitude Comparator   (7485)BCD to 7-Segment Decoder   (7447)Monostable Multivibrator (74121)Synchronous Binary Counter   (74163)Decade Counter (7490)7-Segment LED Display (2 Nos.) Logic Input Switches  (10 Nos.)Logic Status Indicators (10 Nos.)Bounce less Pulsar1Hz & 1KHz TTL ClocksAssembled in Metal Box with Screen Printed Circuit on Aluminum Panel with 2mm Socket for test points.  Set of patch Chords & Experimental Manual

2. Digital IC Trainer-II (Shift Registers & Counters) (Make: R & D Electronics, Modal: DET –502)+5V @ 1A DC power Supply4-Bit R /L Shift Register  (7495)Up / Down Binary Counter  (74193)4-Bit Binary Full Adder  (7483)4-Bit Magnitude Comparator   (7485)BCD to 7-Segment Decoder   (7447)Monostable Multivibrator (74121)Synchronous Binary Counter   (74163)Decade Counter (7490)7-Segment LED Display   (1 No.)Logic Input Switches       (10 Nos.)Logic Status Indicators    (10 Nos.)Bounce less Pulsar1Hz & 1KHz TTL ClocksAssembled in Metal Box with Screen Printed Circuit on Aluminum Panel with 2mm Socket for test points.  Set of patch Chords & Experimental Manual.

3. Digital IC Trainer-III (Flip Flops) (Make: R & D Electronics, Modal: DET –503)+5V @ 1A DC power SupplyDual R-S Flip Flops  (7400) (2 Nos.) Dual J-K Flip Flops  (7476)  (2 Nos.)D-Flip Flop Using IC (7476)T-Flip Flop Using IC (7476)Dual 4-Input AND Gates (7425)Logic Input Switches (8 Nos.)Logic Status Indicators (2 Nos.)1Hz & 1KHz TTL Clocks Assembled in Metal Box with Screen Printed Circuit on Aluminum Panel with 2mm Socket for test points.Set of patch Chords & Experimental Manual.

NIC

4. (i)Digital IC Trainer-IV (Gates)  (Make: R & D Electronics, Modal: DET –504)+5V @ 1A DC Power SupplyQuad 2- Input NAND Gate   (7400)Quad 2- Input NOR Gate  (7402)Quad 2- Input AND Gate  (7408)Quad 2- Input EX OR Gate  (7486)Quad 2- Input OR Gate    (7432)Hex Inverters   (7404)Half Adder Using Gates    Full Adder Using GatesLogic Input Switches (4 Nos.)Logic Status Indicators (4 Nos.)1Hz & 10 TTL ClocksAssembled in Metal Box with Screen Printed Circuit on Aluminum Panel with 2mm Socket for test points Set of patch Chords & Experimental Manual.

4. (ii)

Digital IC Trainer-IV (CMOS Gates)(Make: R & D Electronics, Modal: DET –504A)+5V @ 1A DC power SupplyQuad 2- Input NAND Gate   (4011)Quad 2- Input NOR Gate  (4001)Quad 2- Input AND Gate  (4081)Quad 2- Input Ex-OR Gate   (4070)Quad 2- Input OR Gate (4071)Hex Inverters   (4069)Half Adder Using Gates    Full Adder Using GatesLogic Input Switches (8Nos.)Logic Status Indicators (8Nos)Assembled in Metal Box with Screen Printed Circuit on Aluminum Panel with 2mm Socket for test points Set of patch Chords & Experimental Manual.

5. Digital IC Trainer (IC Bases & 26 Pin FRC)(Make: R & D Electronics, Modal: DET –505)5V @ 1A DC power Supply,16 Pin IC Bases With One 4mm Socket Per Pin,   (5 Nos.)7-Segment LED Display,   (4 Nos.)BCD to 7-Segment Decoder,   (7447)Logic Input Switches,   (10 Nos.)Logic Status Indicators,   (10 Nos.)1 Hz & 1KHz TTL Clocks,Assembled in Metal Box with Screen Printed Circuit on Aluminum Panel with 2mm Socket for test points Set of patch Chords & Experimental Manual.

6. Digital IC Trainer Kit-VI (Make: R & D Electronics, Modal: DET –506)+5V @ 1A DC power SupplySolder less Board (840 Tie Points)  (2 Nos.)7-Segment Display With Decoder / Driver (2 Nos.)Built In Logic Probe  (1 Nos.)Logic Input Switches   (9 Nos.)Logic Status Indicators   (8 Nos.)Loud Speaker 8 ohms, 2w1 Hz, 10 Hz, 100 Hz, 1 KHz, 10 KHz TTL ClocksAssembled in Metal Box with Screen Printed Circuit on Aluminum Panel with 2mm Socket for test points.Set of patch Chords & Experimental Manual.

7. Digital & Analog Trainer (TTL and CMOS)(Make: R & D Electronics, Modal: DET –507)+5V & +15 V @ 500 Amp DC power SupplySolder less Board (840 Tie Points)   (2 Nos.)1 Hz, 10 Hz, 100 Hz, 1 KHz, 10 KHz TTL Clocks7-Segment Display With Decoder / Driver  (1 Nos.)Built In Logic Probe   (1 Nos.)Logic Input Switches (TTL / CMOS) (10 Nos.)Logic Status Indicators (TTL / CMOS) (10 Nos.)Loud Speaker 8 ohms, 2w  (1Nos.)

NIC1K, 10K Potentiometers   (2 Nos.)Assembled in Metal Box with Screen Printed Circuit on Aluminum Panel with 2mm Socket for test points.Set of patch Chords & Experimental Manual.

8.(i)

General Purpose Electronic Trainer-I(Make: R & D Electronics, Modal: DET –508)+5V @ 1A DC Power SupplySolder less Board (840 Tie Points)   (2 Nos.)BCD to 7 – Segment Decoder (7447)   (2 Nos.)Logic Input Switches (10 Nos.)Logic Status Indicators (10 Nos.)Loud Speaker 8 ohms, 2w  (1Nos.)Pulsar Logic probe (High & Low)1 Hz, 10 Hz, 100 Hz, 1 KHz, 10 KHz Clocks Assembled in Metal Box with Screen Printed Circuit on Aluminum Panel with 2mm Socket for test points. Set of patch Chords & Experimental Manual.

8.(ii)

General Purpose Digital Trainer(Make: R & D Electronics, Modal: DET –508A)+5V @ 1A & +12V @ 350mA DC Power SupplySolder less Board (840 Tie Points)  (2 Nos.)7-Segment Display,  (2 Nos.)Logic Input Switches,   (10 Nos.)Logic Status Indicators,   (10 Nos.)Logic Probe (High & Low)Pulsar1 Hz, 10 Hz, 100 Hz, 1 KHz, 10 KHz Clocks.Assembled in Metal Box with Screen Printed Circuit on Aluminum Panel  with 2mm Socket for test points.Set of patch Chords & Experimental Manual.

8.(iii)

General Purpose Digital Trainer(Make: R & D Electronics, Modal: DET –508B)+5V @ 1A & +12V @ 350mA DC power SupplySolder less Board (840 Tie Points)  (2 Nos.)7-Segment Display,  (3 Nos.)Logic Input Switches,   (10 Nos.)Logic Status Indicators,   (10 Nos.)Logic Probe (High & Low)Loud Speaker 8 ohms, 2w  (1Nos.)Pulsar1 Hz, 100 Hz, 1 KHz, 10 KHz, 1 MHz Clocks.Assembled in Metal Box with Screen Printed Circuit on Aluminum Panel  with 2mm Socket for test points.Set of patch Chords & Experimental Manual.

8.(iv)

General Purpose Electronics Trainer(Make: R & D Electronics, Modal: DET –508C) +5V @ 1A & +15V @ 350mA DC Power SupplySolder less Board (840 Tie Points)  (2 Nos.)0.5 to 20V DC Variable Source6-0-6 AC Source.7-Segment Display, (2 Nos.)Logic Input Switches,  (8 Nos.)Logic Status Indicators,  (10 Nos.)Logic Probe (High & Low)Loud Speaker 8 ohms, 2w  (1Nos.)Pulsar0.1 Hz, 1 Hz, 1 KHz, 10 KHz, 1 MHz Clocks.Assembled in Metal Box with Screen Printed Circuit on Aluminum Panel  with 2mm Socket for test points.Set of patch Chords & Experimental Manual.

8.(v)

General Purpose Electronics Trainer(Make: R & D Electronics, Modal: DET –508D)+5V @ 1A & +15V @ 500mA DC Power SupplySolder less Board (840 Tie Points)   (2 Nos.)0.5 to 20 V DC Variable Source (2 Nos.)6-0-6 AC Source.7-Segment Display,   (2 Nos.)Logic Input Switches,   (8 Nos.)Logic Status Indicators,   (10 Nos.)Logic Probe (High & Low)

NICLoud Speaker 8 ohms, 2w (1Nos.)Pulsar0.1 Hz, 1 Hz, 1 KHz, 10 KHz, 1 MHz Clocks.Assembled in Metal Box with Screen Printed Circuit on Aluminum Panel   with 2mm Socket for test points.Set of patch Chords & Experimental Manual.

9. General Purpose Electronic Trainer-II(Make: R & D Electronics, Modal: DET –509)+5V @ 1A and +15V @ 500mA DC power SupplySolder less Board (840 Tie Points)     (2 Nos.)BCD to 7-Segment Decoder (7447)Logic Input Switches (8Nos.)Logic Status Indicators (8Nos.)Loud Speaker 8 ohms, 2w  (1Nos.)1Hz & 10 Hz TTL Clocks   (2Nos.)Assembled in Metal Box with Screen Printed Circuit on Aluminum Panel with 2mm Socket for test points. Set of patch Chords & Experimental Manual.

LOGIC GATES

10. 

Basic Logic Gates (Make: R & D Electronics, Modal: DET –510)2-input AND, OR Gates using Diode LogicTransistor NOT Gate   Logic inputs, and Logic Status Indicators+5V @ 250mA DC Power Supply,Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB Panel with 4mm Socket for test Points.  Set of Patch Chords & Experimental Manual

11. Programmable ‘X-OR’ and ‘X-NOR’ Gates (Make: R & D Electronics, Modal: DET –511)Ex-OR Gates (8Nos.)Logic I/P Switches  (10Nos.)Logic Status Indicators (4Nos.)+5V @ 250mA DC Power Supply,Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB Panel with 4mm Socket for test pointsSet of Patch Chords & Experimental Manual

12. Verification of De Morgan’s Theorems(Make: R & D Electronics, Modal: DET –512)NAND Gates (7400), (4 Nos.)NOR Gates (7402),    (4 Nos.)NOT Gates (7404), (6 Nos.)Logic Input Switches,   (4 Nos.)Logic Status Indicators,   (4 Nos.)+5V @ 250 mA DC Power Supply,Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB Panel with 4mm Socket for test points. Set of Patch Chords & Experimental Manual.

13. Half & Full Adder & Sub tractor(Make: R & D Electronics, Modal: DET –513)AND Gates (7408),  (2 Nos.)OR Gate (7432),   (1 Nos.)Logic Input Switches,  (3 Nos.)Status Indicators, (4 Nos.) +5V @ 250mA DC Power Supply,Assembled in Metal Box with Screen Printed Circuit on Glass   Epoxy PCB Panel with 4mm Socket for test pointsSet of Patch Chords & Experimental Manual.

14. 4-Bit Binary Full Adder & Sub tractor (Make: R & D Electronics, Modal: DET –514)4-Bit Binary Full Adder (7483),Ex-OR Gates (7486), (4 Nos.)Logic Input Switches,   (9 Nos.)Logic Status Indicators,   (5 Nos.)+5V @ 250 mA DC Power Supply,Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB Panel with 4mm Socket for test points.Set of Patch Chords & Experimental Manual.

NIC

15. Transistor As A Switch FLIP FLOP   (Make: R & D Electronics, Modal: DET –515)Built in +5V @ 250mA Fixed DC Voltage SourceTransistor as a Switch CircuitAssembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points.Set of patch Chords & Experimental Manual.

FLIP FLOPS

16. RS, D, T & JK Flip Flops  (Make: R & D Electronics, Modal: DET –516)RS, D & T Flip Flops one each using (IC 7400, 7447,7476) Logic Input Switches,   (4 Nos.) Logic Status Indicators,   (4 Nos.)Bounce less Pulsar +5V @ 250mA DC Power Supply,Assembled in Metal Box with Screen printed Circuit on Glass Epoxy with 4mm Socket for test points.    Set of Patch Chords & Experimental Manual.

17. Master Slave JK Flip-Flop Using Gates(Make: R & D Electronics, Modal: DET –517)Master Slave JK Flip-Flop using NAND Gates IC7400 and IC7410 Bounce less Pulsar     +5V @ 250mA DC Power Supply, Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB Panel with 4mm Socket for test points.  Set of Patch Chords & Experimental Manual.

18. JK Flip Flops  (Make: R & D Electronics, Modal: DET –518) JK Flip-Flops based on IC 7476   (4 Nos.) Logic Input  Switches    (4 Nos.)  Logic Status Indicators.  (4 Nos.) Bounce less Pulsar,  +5V @ 250mA DC Power Supply,Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB Panel with 4mm Socket for test points. Set of Patch Chords & Experimental Manual.

SHIFT REGISTERS

19. Shift Registers-SISO, SIPO, PISO, PIPO                           (Make: R & D Electronics, Modal: DET –519)SISO (7491), SIPO (74164), PISO (74165), PIPO (74194),Logic Status Indicators,                             (16Nos.)1 Hz & 10 Hz TTL Clocks,+5V @ 250mA DC Power Supply,Assembled in Metal Box with Screen Printed Circuit on A Glass Epoxy PCB Panel with 4mm Socket for test points. Set of Patch Chords & Experimental Manual.

20. Shift Registers-SIPO, Universal.   (Make: R & D Electronics, Modal: DET –520)SIPO (74164), Universal SR (74194),Logic I / P Switches, (8 Nos.)Logic Status Indicators,  (8 Nos.)1 Hz &10 Hz TTL Clocks,+5V @ 250mA  DC Power SupplyAssembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB Panel with 4mm Socket for test points. Set of Patch Chords & Experimental Manual

NIC21. Universal Shift Registers (74194)

(Make: R & D Electronics, Modal: DET –521)Universal SR (74194),Logic Input Switches,  (10Nos.)Logic Status Indicators, (4Nos.)1 Hz TTL Clock,+5V @ 250mA DC Power Supply,Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB Panel with 4mm Socket for test points. Set of Patch Chords & Experimental Manual

22. Universal Shift Registers (7496, 74195/196)(Make: R & D Electronics, Modal: DET –522)Universal SR (74195),Logic I / P Switches  (10 Nos.)Logic Status Indicators,  (4 Nos.)1 Hz TTL Clock,+5V @ 250mA DC Power Supply,Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB Panel with 4mm Socket for test points. Set of Patch Chords & Experimental Manual.

23. Tri-state Buffer & Bussing Techniques  (Make: R & D Electronics, Modal: DET –523)Tri-state Buffer (74245),Logic Input Switches,  (20 Nos.)Logic Status Indicators,  (18 Nos.)+5V @ 250mA DC Power Supply,Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB Panel with 4mm Socket for test points Set of Patch Chords & Experimental Manual.

24. Data Transfer in Bus Connected Registers (7496,74195/196)(Make: R & D Electronics, Modal: DET –524)Built in + 5V @ 250mA Fixed DC Voltage SourceThree 4-Bit Registers (IC 7496, 74195/196)Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB Panel with 4mm Socket for test points Set of patch Chords & Experimental Manual.

COUNTTERS

25. 4-Bit Synchronous Binary Counter   (Make: R & D Electronics, Modal: DET –525)4-Bit Binary Synchronous Counter (74161),Logic I/P Switches, (6 Nos.)Logic Status Indicators,   (4 Nos.)1 Hz & 1kHz TTL clock,+5V @ 250mA. DC Power Supply,Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB Panel with 4mm Socket for test points Set of Patch Chords & Experimental Manual

26. 4-Bit Binary Ripple Counter(Make: R & D Electronics, Modal: DET –526)4-Bit Binary Ripple Counter (7493),Logic Input Switches,   (2 Nos.) Logic Status Indicators,   (4 Nos.)1 Hz & 1 kHz TTL clocks,+5V @  250mA DC Power Supply,Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB Panel with 4mm Socket for test points Set of Patch Chords & Experimental Manual.

27. (i)

Modulo-N Counter (Make: R & D Electronics, Modal: DET –527)Modulo N Decade Counter   (7490),Binary Counter (7493), & Gates    (7400),Logic Input Switches (4 Nos.)Logic Status Indicators (4 Nos.)1 Hz & 10 k Hz TTL clocks,+5V @ 250mA DC Power Supply,Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB Panel with 4mm Socket for test points. Set of Patch Chords & Experimental Manual

27. Modulo-N Counter using 74190(Make: R & D Electronics, Modal: DET –527A)

NIC(ii) Decade UP/DOWN Counter (74190),

3-input NAND Gate,Bounce less pulserAssembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB Panel with 4mm Socket for test points. Set of Patch Chords & Experimental Manual.

28. 4-Bit Decade Counter  (Make: R & D Electronics, Modal: DET –528)4-Bit Decade Counter   (7490),Logic Input Switches,   (4 Nos.)Logic Status Indicators,   (4 Nos.)1Hz & 10 kHz TTL clocks,+5V @ 250mA DC Power Supply,Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB Panel with 4mm Socket for test points. Set of Patch Chords & Experimental Manual.

29. Decade Frequency Scalar  (Make: R & D Electronics, Modal: DET –529)Decade Frequency Divider   (7490)Logic Input Switches,   (4 Nos.)Logic Status Indicators,   (4 Nos.)1kHz TTL clock,5V @ 250mA DC Power Supply,Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB Panel with 4mm Socket for test points. Set of Patch Chords & Experimental Manual

30. 4-Bit UP/Down Counter (Single Clock)(Make: R & D Electronics, Modal: DET –530)JK Flip Flops (7476),  (4 Nos.)Ex-OR Gates (7486), (3 Nos.)1Hz TTL Clock,Logic Input Switches,   (1 Nos.)Logic Status Indicators,   (4 Nos.)+5V @ 250mA DC Power Supply,Assembled in Metal Box with Screen printed Circuit on Glass Epoxy PCB with 4mm Socket for test points.  Set of Patch Chords & Experimental Manual.

31. 4-Bit UP/Down Counter     (Separate Clocks)(Make: R & D Electronics, Modal: DET –531)4-Bit Up/ Down Counter (74193),1Hz TTL clock,Logic Input Switches,   (6 Nos.)Logic Status Indicators,   (6 Nos.)+5V @ 250mA Dc Power Supply,Assembled in Metal Box with Screen printed Circuit on Glass Epoxy PCB with 4mm Socket for test points.  Set of Patch Chords & Experimental Manual.

32. 8-Bit UP/Down Counter (Ripple Clock)(Make: R & D Electronics, Modal: DET –532)4-Bit UP/Down Counter (74191),   (2 Nos.)1Hz & 1kHz TTL clocks,Logic Input Switches,   (2 Nos.)Logic Status Indicators,   (8 Nos.)+5V @ 250mA. DC Power Supply,Assembled in Metal Box with Screen printed Circuit on Glass Epoxy PCB with 4mm Socket for test points.Set of Patch Chords & Experimental Manual.

33. 4-Bit Ring Counter   (Make: R & D Electronics, Modal: DET –533)4-Bit Ring Counter (7495)Logic Input Switches,   (5 Nos.) Logic Status Indicators,   (4 Nos.)1Hz & 10kKHz TTL clocks,+5V @ 250mA DC Power Supply,Assembled in Metal Box with Screen printed Circuit on Glass Epoxy PCB with 4mm Socket for test points.  Set of Patch Chords & Experimental Manual

NIC34. 3-Digit Decade Counter (3 x 7490) 

(Make: R & D Electronics, Modal: DET –534)Built in + 5V @ 250mA Fixed DC Voltage SourceThree 7490 Decade CountersThree BUP to 7 Segment Decoder/DriversBounce less PulserAssembled in Metal Box with Screen printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltages   Set of patch Chords & Experimental Manual.

DIGITAL TRAINERS (GENERAL)

35. TTL-CMOS-TTL Interface                  (Make: R & D Electronics, Modal: DET –535)TTL NAND Gates (7400),CMOS NAND Gates (CD 4011),Logic Input Switches,                                 (2 Nos.)Logic Status Indicators,                              (4 Nos.)+5V, +12V @ 250mA, DC Power Supply, Assembled in Metal Box with Screen printed Circuit on Glass Epoxy PCB with 4mm Socket for test points.     Set of Patch Chords & Experimental Manual.

36. 4-Bit Magnitude Comparator           (Make: R & D Electronics, Modal: DET –536)4-Bit Magnitude Comparator (7485),Logic Input Switches,                                 (11 Nos.)Logic Status Indicators,                              (3 Nos.)+5V @ 250mA DC Power Supply,Assembled in Metal Box with Screen printed Circuit on Glass Epoxy PCB with 4mm Socket for test points.     Set of Path Chords & Experimental Manual.

37. 4-Bit x 4-Bit Binary Multiplier           (Make: R & D Electronics, Modal: DET –537)4-Bit x 4-Bit Binary Multiplier Using AND Gates (7408)Binary Full Adders (7483),                          (3 Nos.)Logic Input Switches,                                 (8 Nos.)Logic Status Indicators,                              (8 Nos.)+5V @ 250mA DC Power Supply,Assembled in Metal Box with Screen printed Circuit on Glass Epoxy PCB with 4mm Socket for test points.     Set of Path Chords & Experimental Manual

38. 4-Bit Arithmetic Logic Unit              (Make: R & D Electronics, Modal: DET –538)4-Bit Arithmetic Logic Unit (74181),Logic Input Switches,                                 (14 Nos.)Logic Status Indicators,                              (8 Nos.)+ 5V @ 250mA, DC Power Supply,Assembled in Metal Box with Screen printed Circuit on Glass Epoxy PCB with 4mm Socket for test points.     Set of Path Chords & Experimental Manual.

39. Read Only Memory (ROM)                (Make: R & D Electronics, Modal: DET –539)Read Only Memory (2732),Logic Input Switches                                 (9 Nos.)Logic Status Indicators,                      (8 Nos.)+ 5V @ 250mA, DC Power Supply.Assembled in Metal Box with Screen printed Circuit on Glass Epoxy PCB with 4mm Socket for test points.        Set of Path Chords & Experimental Manual.

40. Random Access Memory (RAM)       (Make: R & D Electronics, Modal: DET –540)Random Access Memory (6116),Tri-state Buffer (74373),

NICLogic Input Switches,                         (17 Nos.)Logic Status Indicators,                      (8 Nos.)+5V @ 250mA, DC Power Supply,Assembled in Metal Box with Screen printed Circuit on Glass Epoxy PCB with 4mm Socket for test points.        Set of Path Chords & Experimental Manual.

ENCODERS/DECODERS

41. 8-Bit Even/Odd Parity Generator / Checker                    (Make: R & D Electronics, Modal: DET –541)Even / Odd Parity Generator (74180),Logic Input Switches,                         (10 Nos.)Logic Status Indicators,                       (2 Nos.)+5V @ 250mA, DC Power Supply, Assembled in Metal Box with Screen printed Circuit on Glass Epoxy PCB with 4mm Socket for test points.        Set of Path Chords & Experimental Manual.

42. Decimal to BCD Encoder                  (Make: R & D Electronics, Modal: DET –542)Decimal to BCD Encoder using NAND Gates      (7420),Logic Input Switches,                         (10 Nos.)Logic Status Indicators,                      (4 Nos.)+5V @ 250mA DC Power Supply,Assembled in Metal Box with Screen printed Circuit on Glass Epoxy PCB with 4mm Socket for test points.        Set of Patch Chords & Experimental Manual.

43. BCD TO Hex Decoder                       (Make: R & D Electronics, Modal: DET –543)2-Digit BCD to HEX Decoders with Full Adders (74184),       (2 Nos.)BCD to 7-Segment Decoders (7447),                                        (2 Nos.)Thumb wheel Switches,                                                         (2 Nos.)7-Segment LED Displays,                                (2 Nos.)NOT Gates                                                                            (8 Nos.)+5V @ 250mA DC Power Supply,Assembled in Metal Box with Screen printed Circuit on Glass Epoxy PCB with 4mm Socket for test points.        Set of Patch Chords & Experimental Manual.

44.Decimal to Binary Encoder               (Make: R & D Electronics, Modal: DET –544)Decimal to Binary Diode Matrix EncodeLogic Input Switches                                      (10 Nos.)Logic Status Indicators,                                  (4 Nos.)+5V @ 250mA DC Power Supply,Assembled in Metal Box with Screen printed Circuit on Glass Epoxy PCB with 4mm Socket for test points.        Set of Patch Chords & Experimental Manual.

45. Binary to Decimal Decoder              (Make: R & D Electronics, Modal: DET –545)Binary to Decimal Decoder (7442),Logic Input Switches,                  (4 Nos.)Logic Status Indicators,                     (10 Nos.)+5V @ 250mA DC Power Supply,Assembled in Metal Box with Screen printed Circuit on Glass Epoxy PCB with 4mm Socket for test points.Set of Patch Chords & Experimental Manual.

46. BCD to 7- Segment Decoder           

NIC(Make: R & D Electronics, Modal: DET –546)BCD to 7-Segment Decoder (7447),7- Segment LED Display,                                                                      Logic input Switches,             (4 Nos.)+5V @ 250mA DC Power Supply,Assembled in Metal Box with Screen printed Circuit on Glass Epoxy PCB with 4mm Socket for test points.        Set of Patch Chords & Experimental Manual

47. 4-Bit Binary to Gray & Gray to Binary Converter(Make: R & D Electronics, Modal: DET –547)Built in +5V @ 250mA Fixed DC Voltage Source,Logic Input Switches,             (4 Nos.)Logic Status Indicators,          (4 Nos.)Ex-OR Gates,                         (3 Nos.) 4-Bit Binary to Gray & Gray to Binary ConverterAssembled in Metal Box with Screen Printed on Glass Epoxy PCB with 4mm Socket for test pointsSet of patch Chords & Experimental Manual.

MULTIPLEXERS / DEMULTIPLEXERS

48. 8-Line to 1-Line Multiplexer & Demultiplexer(Make: R & D Electronics, Model: DET 548)8-Line to 1-Line Multiplexer, (74151) Address Generator,                                                                                                         (7493)1kHz TTL Clock,Logic Input Switches,                                                                                                        ( 9 Nos.)Logic Status Indicator                       (1Nos.)+5V @ 250mA DC Power Supply,Assembled in Metal Box with Screen printed Circuit on Glass Epoxy PCB with 4mm Socket for test points.                                                          Set of Patch Chords & Experimental Manual.

49. 16-Line to 1-Line Multiplexer(Make: R & D Electronics, Model: DET 549)16-Line to 1-Line Multiplexer (74150),Address Generator (7493),1kHz TTL Clock,Logic Input Switches,                            (17 Nos.)Logic Status Indicators,                         (5 Nos.)+5V @ 250mA DC Power Supply,Assembled in Metal Box with Screen printed Circuit on Glass       Epoxy PCB with 4mm Socket for test points.                                            Set of Patch Chords & Experimental Manual.

50. 8-Bit ADC (2 Methods)                     (Make: R & D Electronics, Model No. DET – 550)A / D Converter       1) Successive approximation Using ADC (0809)      2) Counter Comparator Method using Up / Down Counter (74161) 1kHz TTL Clock,Logic Status Indicators,                         (16Nos.)0 to 5V Variable Analog Signal,+5V & +12V @ 250mA DC Power Supply,Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.                                  Set of Patch Chords & Experimental Manual.

51. 8-Bit ADC (Successive Approximation Method) (Make: R & D Electronics, Model No. DET – 551)Successive approximation method of Analog to Digital Converter using ADC (0809),1kHz TTL Clock,Logic Status Indicators,                       (8Nos.)

NIC0 to 5V Variable Analog Signal, +5V @ 250mA DC Power Supply,Assembled in Metal Box with Screen printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveformsSet of Patch Chords & Experimental Manual.

52. 8-Bit ADC (Counter Comparator Method)(Make: R & D Electronics, Model No. DET – 552)Counter Comparator method of A/D converter Using   Up / Down Counter (74193), DAC (0800), Comparator(311), Latch (74374), 0 to 5V Variable Analog Signal,1kHz TTL Clock, Logic Status Indicators,                     (8Nos.)+5V @ 250mA, +12V @ 250mA DC Power Supply,Assembled in Metal Box with Screen Printed Circuit Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.                              Set of Patch Chords & Experimental Manual.

53. 4-Bit ADC (Counter Comparator Method)(Make: R & D Electronics, Model No. DET – 553)±12V, +5V @ 250mA D.C Voltage SourceCounter Comparator method of A/D converter Using Up / Down              Counter (74193), DAC (0800), Comparator (311), Latch (74374),Synchronous Counter Circuit (74163)Bounce less Pulses,0 to 5V Variable Analog Signal,1kHz TTL Clock, Logic Status Indicators,   (4Nos.)Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.     Set of Patch Chords & Experimental Manual.

54. 8-Bit DAC (2 Methods)   (Make: R & D Electronics, Model No. DET – 554)8-Bit Digital to Analog Converter using        1) R-2R Ladder Network,       2) 8-Bit Binary Counter (74161),Summing Amplifier (741)1 K Hz TTL Clock,Logic Input Switches,             (8 Nos.)Logic Status Indicators,          (8 Nos.)+5V & +12V / 350mA DC Power Supply,Assembled in Metal Box with Screen printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of Patch Chords & Experimental Manual.

55. 8-Bit DAC (R-2R Network Method) (Make: R & D Electronics, Model No. DET – 555)8-Bit Digital to Analog converter using      1) R-2R Ladder Network and 8-Bit Binary Counter, (74161)Summing Amplifier, (741)1 KHz TTL Clock,Logic I / P Switches, (9 Nos.)Logic Status Indicators,          (8 Nos.)+5V, +/- 12V / 350mA DC Power Supply, Assembled in Metal Box with Screen printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of Patch Chords & Experimental Manual.

56. 4-Bit DAC (R-2R Network Method)(Make: R & D Electronics, Model No. DET – 556)±12V, +5V @ 250mA D.C Voltage Source,

NICR-2R Ladder Network,555 Based Clock Generator,Assembled in Metal Box with Screen printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of patch Chords & Experimental Manual.

57. 8-Bit DAC (Binary Weighted Network Method)(Make: R & D Electronics, Model No. DET – 557)8-Bit Digital to Analog converter Using Ladder Network,8-Bit Binary Counter (74161),Summing Amplifier (741),1kHz TTL Clock,Logic Input Switches,                        (9 Nos.)Logic Status Indicators                      (8 Nos.)+5V, +12V @ 250mA, DC Power Supply,Assembled in Metal Box with Screen printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of patch Chords & Experimental Manual.

58. 4-Bit DAC (Binary Weighted Network Method)(Make: R & D Electronics, Model No. DET – 558)±12V, +5V @ 250mA DC Voltage Source,Resistive Binary Weighted Network,8-Bit Binary Counter (74161),555 Based Clock Generator,Bounce less Pulses,Assembled in Metal Box with Screen printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of patch Chords & Experimental Manual.

59. 8-Bit Analog to Digital  & Digital to Analog Converters (Make: R & D Electronics, Model No. DET – 559)8-Bit Digital to Analog converter & Analog to Digital converter,Summing Amplifier (741),1kHz TTL Clock,Logic Input Switches,                          (9 Nos.)Logic Status Indicators                        (8 Nos.)+5V, +12V @ 250mA, DC Power Supply,Assembled in Metal Box with Screen printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of patch Chords & Experimental Manual.

60. Bread Board Trainer(Make: R & D Electronics, Model No. DET – 560)±12V, +5V @ 500mA DC Voltage Source,Bread Board (840 Tie Points)               (02 Nos.)Assembled in Metal Box with Screen printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of patch Chords & Experimental Manual.

60 (A)

Analog Experimental Trainer (Make: R & D Electronics, Model No. DET – 560A)±12V D.C Voltage Source,1.2 to 15 V variable power supplyAssembled in Metal Box with Screen printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of patch Chords & Experimental Manual.

61. Clock Generator Module(Make: R & D Electronics, Model No. DET – 561)+ 5 V @ 250mA DC Power Supply555 Clock GeneratorCMOS ClockCrystal Clock GeneratorFrequency AdjusterAssembled in Metal Box with Screen printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of patch Chords & Experimental Manual.

NIC62 3-Digit Decade Counter

(Make: R & D Electronics, Model No. DET – 562)+ 5V @ 250mA DC Power SupplyClock GeneratorBounce less Pulser7490 CounterSeven Segment Decoder IC 7447Assembled in Metal Box with Screen printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of patch Chords & Experimental Manual.

62(A)

Universal Shift Register(Make: R & D Electronics, Model No. DET – 562A)+5V @ 250mA DC Power SupplyBounce less pulserClock GeneratorIC 7496Universal 4- bit Shift Register (IC 74195)Logic inputs                                        (8 Nos.)Logic Input indicators                          (8 Nos.)Assembled in Metal Box with Screen printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of patch Chords & Experimental Manual.

62(B)

Input Output Characteristics of TTL Inverter(Make: R & D Electronics, Model No. DET – 562B)+5V @ 250mA DC Power SupplyAmplitude Adjustment of Clock GeneratorTTL (74LS04 IC)Assembled in Metal Box with Screen printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of patch Chords & Experimental Manual.

63. Transfer Characteristic of TTL inverter & Schmitt Trigger(Make: R & D Electronics, Model No. DET – 563)12V Power SupplyAmplitude Adjustment of Clock GeneratorTTL (IC74LS04)Assembled in Metal Box with Screen printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms .Set of patch Chords & Experimental Manual.

64. Calculation of Propagation Delay Time of CMOS of TTL Inverter (Make: R & D Electronics, Model No. DET – 564)0-12V Variable Power SupplyClock Generator, TTL 74LS04, CMOS Inverters (74CO4 & 40106)Assembled in Metal Box with Screen printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of patch Chords & Experimental Manual.

65. Calculation of Power Dissipation of CMOS Inverter (Make: R & D Electronics, Model No. DET – 565)0-12V Variable Power SupplyClock GeneratorCMOS Inverter (74CO4) (40106)Assembled in Metal Box with Screen printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of patch Chords & Experimental Manual.

NIC

AET- 600: SERIES LINEAR / ANALOG ELECTRONICS

TRAINERS

1. Linear IC Trainer (Discrete Version)                                (Make: R & D Electronics, Model No. AET – 601)s+12V @ 500mA DC Power Supply,OP-Amp’s (741)                 (4 Nos.)Voltage Regulator (723)Comparator (710)Timers (555)                     (2 Nos.) Phase Locked Loop (565)Resistor Bank                    (50 Nos.)Capacitor Bank                  (20 Nos.)Potentiometer Bank            (10 Nos.)Transistors (NPN, PNP)       (2 Nos.)(SL 100, SK 100) Silicon Diodes IN4007         (2 Nos.)Germanium Diode 0A79      (1 Nos.)Zener Diodes (VZ 5.1)         (2 Nos.)Assembled in Metal Box with Screen printed Circuit on Aluminum Panel with 2mm Socket for test points.     Set of patch Chords & Experimental Manual

2. Linear IC Trainer (Discrete ECO. Ver.)(Make: R & D Electronics, Model No. AET – 602)Built in + 12 V @ 500mA DC Power SupplyOP-Amps (741)                  (4 Nos.) Voltage Regulator (723)Comparator (710)Timers (555)                     (2 Nos.) Phase Locked Loop (565)Resistor Bank                    (20 Nos.)Capacitor Bank                  (12 Nos.)Potentiometer Bank            (5 Nos.)Assembled in Metal Box with Screen printed Circuit on Aluminum Panel with 2mm Socket for test points.     Set of Patch Chords & Experimental Manual.

3. Linear IC Trainer (Discrete Components)(Make: R & D Electronics, Model No. AET – 603)            Built in +/-12V/500mA DC Power Supply,+/- 12V/350mA variable DC Power Supply,OP-Amps (741)                  (4 Nos.) Voltage Regulator (723)Comparator (710)

NICPhase Locked Loop (565)Timers (555)                     (2 Nos.) Resistor Bank                    (50 Nos.)Capacitor Bank                  (20 Nos.)Potentiometer Bank            (11 Nos.)Transistors NPN/PNP          (4 Nos.)Si, Ge, Zener Diodes          (6 Nos.)Power Transistors              (2 Nos.)                         (2N 3055, 2N 529)ZIF with One Socket per Pin.Assembled in Metal Box with Screen printed Circuit on Aluminum Panel with 2mm Socket for test points      Set of patch Chords & Experimental Manual.

4. Linear IC Trainer (Discrete Ver. With FG)(Make: R & D Electronics, Model No. AET – 604)            Built in +/- 12V/500 mA DC Power Supply,1 Hz-100 KHz Function Generator, (Sine/Square/Triangle waveforms)OP-Amps (741)                              (4 Nos.) Voltage Regulator (723)Comparator (710)Phase Locked Loop (565)Timers (555)                                 (2 Nos.)Resistor Bank                                (50 Nos.)Capacitor Bank                              (20 Nos.)Potentiometer Bank                        (10 Nos.)Transistors (SL 100, SK 100)          (2 Nos.)Si, Diodes (IN4007)                        (2 Nos.)Ge Diodes (0A79)                           (1 Nos.)Zener Diodes (VZ 5.1)                     (2 Nos.)Assembled in Metal Box with Screen printed Circuit on Aluminum Panel with 2mm Socket for test points      Set of patch Chords & Experimental Manual.

5. OP-Amp Timber Trainer                   (Make: R & D Electronics, Model No. AET – 605)            Built in +/- 12V/350mA DC Power Supply,OP-Amps (741)                              (2 Nos.)                                          Phase Locked Loop (565)Timers (555)                                 (2 Nos.) Resistor Bank                                 (12 Nos.)Capacitor Bank                               (8 Nos.)Potentiometer Bank                        (4 Nos.)Transistors (SL 100, SK 100)           (2 Nos.)Signal Diodes (IN4148)                   (2 Nos.)Zener Diodes (VZ 5.1)                     (2 Nos.)Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.                                  Set of patch Chords & Experimental Manual.

6. Op Amp Application Trainer            (Make: R & D Electronics, Model No. AET – 606)            Built in +/-12V / 350mA DC Power SupplySummer                                        (741)Sub tractor                                    (741)Differentiator                                 (741)Integrator                                      (741)

NICInverting Amplifier                          (741)Non-Inverting Amplifier                   (741)Voltage follower                             (741)Current follower                             (741)Clipping Amplifier                           (741)Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy& PCB with 4mm Socket for test points & to see the waveforms.                     Set of Patch Chords & Experimental Manual.

7. OP-AMP Characteristics                   (Make: R & D Electronics, Model No. AET – 607)            Built in +/-12V / 350mA DC Power Supply,OP-Amps (741),Variable I/O Impedance,Component Bank,Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of Patch Chords & Experimental Manual.

8. OP-AMP as Summer                         (Make: R & D Electronics, Model No. AET – 608)            Built in +/- 12V/350mA DC Power Supply,OP-Amp Summer (741),Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of Patch Chords & Experimental Manual.

9. OP-AMP as Differentiation               (Make: R & D Electronics, Model No. AET – 609)            Built in +/- 12V/350 mA DC Power Supply,OP-Amp Differentiation (741),Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of Patch Chords & Experimental Manual.

10. OP-AMP as Integrator                      (Make: R & D Electronics, Model No. AET – 610)            Built in +/- 12V / 350mA DC Power Supply,OP-Amp Integrator (741),Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of Patch Chords & Experimental Manual.

11. OP-AMP as Subtractor                     (Make: R & D Electronics, Model No. AET – 611)Built in +/-12V / 350mA DC Power Supply,OP-Amp Sub tractor (741),Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of Patch Chords & Experimental Manual.

12. 

OP-AMP as Voltage Follower           (Make: R & D Electronics, Model No. AET – 612)Built in +/-12V / 350mA DC Power Supply,OP-Amp Voltage Follower (741),Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of Patch Chords & Experimental Manual.

13. OP-AMP as Schmitt Trigger             (Make: R & D Electronics, Model No. AET – 613)

NICBuilt in +/- 12V/350mA DC Power Supply,Op Amp Schmitt Trigger (741),Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy           PCB with 4mm Socket for test points & to see the waveforms.Set of Patch Chords & Experimental Manual.

14. OP-AMP as Inverting & Non Inverting Amplitude(Make: R & D Electronics, Model No. AET – 614)Built in +/- 12V/350mA DC Power Supply,OP-Amp Inverting Amplifier (741),Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of Patch Chords & Experimental Manual.

15. OP-AMP as Differential Amplifier    (Make: R & D Electronics, Model No. AET – 615)Built in +/- 12V/350mA DC Power Supply,OP-Amp Differential Amplifier (741), Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of Patch Chords & Experimental Manual.

16. OP-Amp as V-to-I & I-to-V Converter(Make: R & D Electronics, Model No. AET – 616)Built in +/- 12V / 350mA DC Power Supply,OP-Amp (741) as Voltage to Current Converter & Current to Voltage Converter,Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of Patch Chords & Experimental Manual.

17. OP-Amp as V-to- F & F-to-V Converter(Make: R & D Electronics, Model No. AET – 617)Built in +/- 12V/350mA DC Power Supply,Variable DC Voltage Source,OP-Amp (TL084) as Voltage to Frequency Converter &Frequency to Voltage Converter,Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of Patch Chords & Experimental Manual.

18. OP-Amp as Voltage Regulator         (Make: R & D Electronics, Model No. AET – 618)OP-Amp Voltage Regulator (741),Built in +/- 12V / 350mA DC Power Supply,Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of Patch Chords & Experimental Manual.

   

19. OP-Amp as Bridge Rectifier             (Make: R & D Electronics, Model No. AET – 619)Built in +/- 12V / 350mA DC Power Supply,OP-Amp Bridge Rectifier (741), Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of Patch Chords & Experimental Manual.

20. OP-Amp as Envelope Detector and Window Comparator (Make: R & D Electronics, Model No. AET – 620)Built in +/-12V / 350mA DC Power Supply,AC Input Voltage,OP-Amp (TL084) Envelope detector & Window Comparator,Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of Patch Chords & Experimental Manual.

21. OP-Amp as Constant Current Source                               (Make: R & D Electronics, Model No. AET – 621)Built in +/- 12V/350 mA DC Power Supply,OP-Amp Constant Current Source (741),

NICAssembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of Patch Chords & Experimental Manual.

22. OP-Amp as Adjustable Phase Shifter                               (Make: R & D Electronics, Model No. AET – 622)Built in +/- 12V/350 mA DC Power Supply,OP-Amp Adjustable Phase Shifter (741),Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of Patch Chords & Experimental Manual.

23. OP-Amp as Active Filters (LPF, HPF, BPF & DSF)(Make: R & D Electronics, Model No. AET – 623)Built in +/-12V / 350mA DC Power Supply,OP-Amp (741) in Low Pass, High Pass, Band Pass & Band Reject filter configuration SummerAssembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of Patch Chords & Experimental Manual.

24. OP-Amp as Active Low Pass Filters (Make: R & D Electronics, Model No. AET – 624)Built in +/-12V / 350mA DC Power Supply,Op-Amp (741) Active Low Pass Filter, Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of Patch Chords & Experimental Manual.

   

25. Op Amp as Active High Pass Filters (Make: R & D Electronics, Model No. AET – 625)Built in +/- 12V/350 mA DC Power Supply,Op-Amp (741) Active High Pass Filter,Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of Patch Chords & Experimental Manual.

26. Op Amp as Active Band Pass Filters                            (Make: R & D Electronics, Model No. AET – 626)Built in +/-12V / 350mA DC Power Supply,Op-Amp (741) Active Band Pass Filter, Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of Patch Chords & Experimental Manual.

27. Op Amp as Active Band Reject Filters                         (Make: R & D Electronics, Model No. AET – 627)Built in +/- 12V/350 mA DC Power Supply,Op-Amp (TL084) Active Band Reject Filter,Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of Patch Chords & Experimental Manual.

28. Op Amp as Phase Shift Oscillator    (Make: R & D Electronics, Model No. AET – 628)Built in +/-12V / 350mA D.C. Voltage Source,Op Amp Based Phase Shift Oscillator Circuit,Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of Patch Chords & Experimental Manual.

29. Op Amp as Wein Bridge Oscillator   (Make: R & D Electronics, Model No. AET – 629)Built in +12V / 350mA DC Power Supply,Op-Amp (741) Wein Bridge Oscillator,Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of Patch Chords & Experimental Manual.

30. Op Amp as Audio Amplifier              (Make: R & D Electronics, Model No. AET – 631)Built in +/- 12V/350mA DC Power Supply,

NICOp-Amp (741) Audio Amplifier,Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of Patch Chords & Experimental Manual.

31. Op Amp as Peak Detector                (Make: R & D Electronics, Model No. AET – 632)Built in +/- 12V / 350mA DC Power Supply,Op Amp (741) Peak Detector,Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of Patch Chords & Experimental Manual

   

32. Op Amp as Precision Half & Full Wave Rectifiers.(Make: R & D Electronics, Model No. AET – 633)Built in +/- 12V / 350mA DC Power Supply,Op Amp (TL084) in Precision Half & Full Wave Rectifier configurationsAssembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.      Set of Patch Chords & Experimental Manual.

33. Op Amp as Log & Antilog Amplifier (Make: R & D Electronics, Model No. AET – 634)Built in +/- 12V / 350mA DC Power Supply,Op Amp (TL084) in Log & Antilog Configurations,Variable DC Voltage Source, Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of Patch Chords & Experimental Manual.

34. Op Amp as Instrumentation Amplifier(Make: R & D Electronics, Model No. AET – 635)Built in +/- 12V / 350mA DC Power Supply,Op Amp (TL084) in Instrumentation Amplifier,Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of Patch Chords & Experimental Manual.

35. Op Amp as Square Wave Generator                                 (Make: R & D Electronics, Model No. AET – 636)Built in +/- 12V / 350mA DC Power Supply,Op Amp (TL084) Square Wave Generator,Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of Patch Chords & Experimental Manual.

36. Op Amp as Triangular Wave Generator(Make: R & D Electronics, Model No. AET – 637)Built in +/-12V / 350mA DC Power Supply,Op Amp (TL084) Triangular Wave form generator,Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of Patch Chords & Experimental Manual

37. Op Amp as Saw tooth Wave Generator(Make: R & D Electronics, Model No. AET – 638)Built in +/- 12V / 350mA DC Power Supply,Op Amp (741) Saw tooth wave generator,Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of Patch Chords & Experimental Manual.

38. Op Amp as Pulse Generator             (Make: R & D Electronics, Model No. AET – 639)Built in +/- 12V / 350mA DC Power Supply,

NICOp Amp (741) Pulse generator,Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of Patch Chords & Experimental Manual.

          

39. Op Amp as Sine & Cosine Generator                                (Make: R & D Electronics, Model No. AET – 640)Built in +/- 12V / 350mA DC Power Supply,Op Amp (741) Sine, Cosine Generator,Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of Patch Chords & Experimental Manual.

40. Op Amp as Stair case Generator      (Make: R & D Electronics, Model No. AET – 641)Built in +/- 12V / 350mA DC Power Supply,Op Amp (741) as Staircase Generator using 4-bit counter     (74161) & Clock Generator (555),Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of Patch Chords & Experimental Manual.

41. Coupled Amplifier using OP Amp’s(Make: R & D Electronics, Model No. AET – 642)Built in +/- 12V / 350mA DC Power Supply,Op amp (TL084) as 1st & 2nd Stage Amplifier,Coupling NetworkAssembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of Patch Chords & Experimental Manual.

42. Phase Locked Loop Using 565

(Make: R & D Electronics, Model: AET-643)       Built in + 12V / 350mA DC power Supply,565 Phase Lock Loop,Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltages.Set of patch Chords & Experimental Manual.

43. PLL Frequency Multiplier (Make: R & D Electronics, Model: AET-644)Built in +/- 12V / 350mA DC power Supply,4-Bit synchronous Counter (7490),PLL (565) as Frequency Multiplier,Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltages   Set of patch Chords & Experimental Manual.

44. VCO USING 565                                (Make: R & D Electronics, Model: AET-645)Built in +/- 12V / 350mA DC power Supply,VCO using 556,Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to measure the Voltages   Set of patch Chords & Experimental Manual

45 OP AMP as Sample & Hold Circuit(Make: R & D Electronics, Model No. AET – 650)Built in +/- 5V & +/- 12V 350mA DC Power Supply,Op Amp (TL084) as Signal Generator, Multiplexer (CD4053),Buffer (S&H CA3130),Clock Generator (555),Assembled in Metal Box with Screen Printed Circuit on Glass Epoxy PCB with 4mm Socket for test points & to see the waveforms.Set of Patch Chords & Experimental Manual.

 

NIC