Rapiline 28 ProcessorRapiline 28 Processor

Equipment Refurb ProcessEquipment Refurb Process

Each piece of equipment Bob Weber, Inc. sells is thoroughly refurbished, tested, and cleaned before shipment. When shipped, your equipment will be in excellent cosmetic and operational condition

Processor RefurbProcessor Refurb

Processors require more time to refurbish than any other piece of equipment, due to the extensive cleaning involved

Follows an overview of the refurbishing of an Agfa Rapiline 28 Processor

Processor ConditionProcessor Condition

Processors are usually received in poor to fair condition. (See “before” picture to left)

BWI devotes hours of cleaning and testing to make sure the processor you receive exceeds your expectations! (see “after” picture at end of presentation)

Stripping Processor Stripping Processor

Processors are stripped to the frame so all components can be thoroughly cleaned

Cleaning the tanksCleaning the tanks

Tanks usually have stains or encrusted chemistry like the processor to the right

BWI fills tanks with special processor cleaning solution to remove chemistry residue and most stains

Tanks are then scrubbed clean

Cleaning RacksCleaning Racks

Racks are completely disassembled

Each individual gear and roller is soaked in cleaning solution and scrubbed clean

Any worn rollers or broken gears are replaced

Cleaned racks are then reasssembled

Cleaning PanelsCleaning Panels

Testing ProcessorTesting Processor

After cleaning, BWI tests the processor electronics and all motors, pumps, heating elements, and sensors to ensure proper operation

Any defective parts are replaced

Finishing TestingFinishing Testing

Processor is reassembled Film is run through processor to verify

again proper operation of all componentsOnline processors are connected to the

imagesetter, and these systems are tested extensively for film jams or communication problems between imagesetter and processor

Final Cleaning and PaintingFinal Cleaning and Painting

Each processor has one more final cleaning

Processor is painted before shipment

Completed EquipmentCompleted Equipment

Bob Weber, Inc. refurbishes each processor as meticulously as this Rapiline 28. We are proud to supply our customers refurbished equipment in like new condition

For more information, contact For more information, contact Bob Weber, Inc:Bob Weber, Inc:

www.bob-weber.combweber@bob-weber.comTel: 800-399-4294 / 216-831-0480Fax: 800-837-8973 / 216-831-162823850 Commerce Park Road, Cleveland,

OH 44122 USA