rapid set-up -quick exchange clamping systems – 6 screws for complete change -fully exchangeable...
DESCRIPTION
Example : SPINAL FUSION OFFSET HOOK Step 1 Machine the first 5 sides, starting from a bar Step 2 Machine collet on subspindle = mirror step 1TRANSCRIPT
Rapid set-up-Quick exchange clamping systems – 6 screws for complete change-Fully exchangeable between main- and subspindle upto 50 mm bar passage-Standard collets ( W / F type )
6 for success :
Manufacturing of clamping tools on machine
- Bumotec uses here the OTTET system from a Geneva company- Manufacturing of form collets on machine ( main- subspindle)- No waiting time from toolmaker- No adaption of collets. Matches the first time – no clamping marks- Use existing contour, just switch G41 / G42- Can be case gardened for series- Ideal in prototype stage: No panic at design change
-
W-Ring for ID / OD clamping
Example : SPINAL FUSION OFFSET HOOK
Step 1Machine the first 5 sides, starting from a bar
Step 2Machine collet on subspindle = mirror step 1