rami merdas cv 2016
TRANSCRIPT
1 | Page – Rami Merdas Email: [email protected] Mobile: +961 70 597 592
Rami Merdas Airfield Design Engineer
Airports Department
Transportation
Professional Experience
5 years
Education
2014: Bachelor of Engineering (BE) -
Civil & Environmental Engineering with
distinction, Notre Dame University (NDU),
Lebanon.
2009: Lebanese Baccalaureate -
Mathematics degree, Lebanese
Evangelical School, Lebanon.
Professional Membership
Order of Architects and Engineers-
Lebanon
American Society for Civil Engineers
Professional Experience
May 2016-Present: Airfield Design
Engineer – Airports and Pavement Design
Department (Khatib & Alami)
Jan 2016 – May 2016 Design Engineer –
Roads and Highways Design Department
(Rafik El Khoury & Partners)
July 2014 – Dec 2015 Structural Design
Engineer – Structural Design Department
(Rafik El Khoury & Partners)
Feb 2012 – June 2014 Undergraduate
Structural Design Engineer Assistant –
Structural Design Department (Rafik El
Khoury & Partners)
Professional Training
Heliport Design - ICAO ANNEX 14
VOLUME II
Languages
English
Arabic
Nationality
Lebanese
Key Qualifications
Gathered around 5 years of experience in deferent
sectors of civil engineering. Worked as a design
engineer on projects of Airports, Roads and Highways,
Pavement Structures, Vehicular Bridges, Marine
Structures, Commercial and Residential Building
Structures, Assessment / Rehabilitation of different
kinds of structures, and Proposals. Principal
qualifications include the following: Airfield geometric
and pavement design, plan, profile, cross-sections,
rehabilitation and widening of existing facilities,
improvement of major airfield elements, heliports,
obstacle limitation surfaces, construction drawings, bill
of quantities, technical specifications, and reports.
Familiar with FAA and ICAO design guidelines and
regulations.
Experience Record:
2016 - Present : Khatib & Alami
Airports & Aviation
Project: Udhailiyah Airstrip Extension,
KSA Role: Design Engineer
Scope of work: The project consists
of the runway extension as well as all
the affected elements like (Obstacle
limitation surfaces, pavement
evaluation and design, lighting
system, pavement marking, perimeter
fencing, and patrol road). It also
includes the design of turnaround
area for craft maneuvering at north of
runway extension, and engineering of
all interfaced existing utilities. And
provision of Engineering Materials
Arresting System (EMAS) on south
side of the existing runway.
2 | Page – Rami Merdas Email: [email protected] Mobile: +961 70 597 592
Project: Ranyah Airport, Strategic Missile Forces (Ministry of Defense)-Saudi Arabia
Role: Design Engineer
Scope of work: The project consists of planning and design of new Airport
in Ranyah. The project includes site selection, obstacle limitation surfaces,
topographic survey; geotechnical investigations; architectural and civil design;
preparation of architectural, civil, electrical and mechanical design drawings; and
preparation of Bill of Quantities (BOQ) and Tender Documents. Airside scope of
works covers planning and design of runway (Code E aircraft), taxiway, apron and
fire rescue roads. The landside work includes design of terminal, firefighting, control
tower, administration and auxiliary buildings, in addition to roads and parking design
Project: HGH Raised Helipad/ Service Block at Hamad Medical Corporation, Qatar
Role: Design Engineer
Scope of work: Design of raise helipad at the service Block at Hamad Medical
Corporation. Duties included design of the Helipad dimensions and related
information, Physical characteristics, Obstacle limitation surfaces and marking.
Roads & Pavement
Project: Development of roads and infrastructure in Al-Khor Town-Phase 2, Qatar
Role: Pavement Design
Scope of work: Al khor Town is located south of Laffan industrial City and covers
1400 Hectares and includes 170km of roads. Al-Khor consists currently of 70% built
up areas, primarily residential having also some commercial and governmental
properties along with schools and several mosques.
Feb 2012 - May 2016 : Rafik El Khoury & Partners
Project: Dirab Military Air Base, KSA
Role: Design Engineer (Rafik El Khoury & Partners)
Scope of work: The project involved the design of a new military airport, including
battalion and airfield areas, validation of earthwork quantities, preparation of
detailed construction drawings, design of battalion roads and parking, technical
specifications, pavement design of roads and parking.
Project: Admir Development, Lebanon
Role: Design Engineer Scope of work: The project involved roads and pavement design of a residential
compound located in a mountainous area. The design package covered the
preparation of construction drawings of all road related facilities, bill of quantities,
design reports, and technical specifications for all road work facilities.
Project: Cedars Mountain Resort, Lebanon
Role: Design Engineer Scope of work: The project involved roads and pavement design of a residential
compound located in one of the highest locations in Lebanon above sea level. The
design package covered the preparation of construction drawings of all road
related facilities, bill of quantities, design reports, and technical specifications for all
road work facilities.
Bridge Design
Project: Jabal Omar Development Project, Bridge along Road E (Vehicular Bridge),
KSA
Role: Design Engineer Scope of work: The project encountered a sloped bridge consisting of 12
3 | Page – Rami Merdas Email: [email protected] Mobile: +961 70 597 592
reinforced concrete 19m spans, connecting 2 regions in the area. Design of
structural elements (piers, foundations, corbels, deck reinforcement) and modeling
of structural elements using finite element software was implemented. The
package covered framing and reinforcement plans of piers, deck, foundations,
abutments, apron slabs, and preparation of design reports and technical
specifications.
Project: Maintenance, Improvement & Upgrade of Hamad Bin Abdullah Road
(Vehicular Bridge), UAE
Role: Design Engineer Scope of work: The project encountered a 3 spans pre-stressed deck system
bridge, with a 58m middle span replacing the traffic light junction and 2 pedestrian
tunnels crossing under the main road. Design of structural elements (pedestrian
tunnels, L shape retaining walls, piers, foundations) was technical specifications for
the structural works.
Structural Design
Project: Caisson Line Inspection & Renovation, Solidere, Lebanon
Role: Design Engineer Scope of work: The project consists of the rehabilitation of an existing damped
reinforced concrete structure, forming a 1400m sea defense line along the
reclaimed section of the coastline, located close to the recently developed and
refurbished down town area of Beirut. It is composed of 84 reinforced concrete
wave breakers (Caissons) showing excessive damage to sever environmental
conditions. The rehabilitation package required the revision of as built drawings
and previous inspection reports as well as site visits for caissons status inspection,
and preparation of rehabilitation construction drawings, reports, and technical and
material specifications.
Project: Jumeirah Beach Resort, Saadiyat Island, UAE
Role: Design Engineer Scope of work: The design package encountered the structural design, modeling,
bill of quantities, and preparation of all required plans and specifications for the
project implementation.
Project: Edelweiss, Faqra Heart Village, Lebanon
Role: Design Engineer Scope of work: The project is a high standard compound in Mount Lebanon
composed of 127 chalets. The design package required the preparation all plans
and specifications, modeling, design reports, bill of quantities, and technical
specifications.
Project: Business Park, Waterfront City, Lebanon
Role: Design Engineer Scope of work: The Project consisted of 2 office buildings in Waterfront City, each
consisting of 5 stories above ground, and 2 common basements where all
structural elements were designed. Framing and reinforcement plans,
specifications and quantities for all the designed structural elements were provided.
Computer Skills :
Design & Engineering Software: Civil 3D, FAARFIELD, AutoCAD, Primavera, Etabs, Safe, Robot, Arch Effel, Sap-2000, PCA-Column, S-concrete, and Microsoft Office.