ram no-drill seat bases · nissan nv200 s compact cargo (2013-2015) nissan nv200 sv compact cargo...

2
Installs in minutes with no drilling required Won’t interfere with levers This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc. Vehicle base for the SPECIFICATIONS Placement Passenger side, in front, where seat frame meets floor board. Drilling Required None - uses existing seat bolts Seat Configuration Bucket Construction/Finish Steel/Black Powder coat Note: Will limit forward most seat travel on passenger side. Dimensions A = 16.88", B = 9.5", C = 1.55” Hole Centers = 15” to 15.5625” Features RAM No-Drill TM Seat Bases National Products, Inc. Item Number RAM-VB-192-SW1 Chevrolet City Express (2015) Nissan NV200 S Compact Cargo (2013-2015) Nissan NV200 SV Compact Cargo (2013-2015) National Products, Inc. Website: www.ram-mount.com Email: [email protected] 8410 Dallas Ave S Seattle, WA 98108 Phone: (206) 763-8361 Fax: (206) 763-9615 Complete Vehicle Mount RAM-VB-192-SW1 Vehicle Base

Upload: trinhcong

Post on 17-Sep-2018

218 views

Category:

Documents


0 download

TRANSCRIPT

Installs in minutes with no drilling requiredWon’t interfere with levers

This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.

Vehicle base for the

SPECIFICATIONSPlacementPassenger side, in front, where seat frame meets floor board.

Drilling RequiredNone - uses existing seat bolts

Seat ConfigurationBucket

Construction/FinishSteel/Black Powder coat

Note: Will limit forward most seat travel on passenger side.

DimensionsA = 16.88", B = 9.5", C = 1.55”Hole Centers = 15” to 15.5625”

Features

RAM No-Drill TM Seat BasesNational Products, Inc.

Item NumberRAM-VB-192-SW1

Chevrolet City Express (2015)Nissan NV200 S Compact Cargo (2013-2015)Nissan NV200 SV Compact Cargo (2013-2015)

National Products, Inc.

Website: www.ram-mount.comEmail: [email protected]

8410 Dallas Ave SSeattle, WA 98108Phone: (206) 763-8361Fax: (206) 763-9615

Complete Vehicle MountRAM-VB-192-SW1

Vehicle Base

National Products, Inc.

Website: www.ram-mount.comEmail: [email protected]

8410 Dallas Ave SSeattle, WA 98108Phone: (206) 763-8361Fax: (206) 763-9615

Vehicle base for the

INSTALLATION INSTRUCTIONS1. If you purchased a complete No-Drill™ system, you will want to attach products to the base before installation. This includes, risers, stabilizer feet, and lower female pole units. It is much more difficult to attach these items once the base is in place.

2. Remove the plastic caps covering the front passenger side seat bolt hex heads.

3. Using a socket wrench, loosen the two hex bolts enough to allow space for the base to slide underneath the seat legs.

4. Slide the base under the seat legs so the back of ths slots touches the seat leg bolts.

5. Re-tighten the seat leg bolts and replace the plastic caps over the hex bolts.

This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.

RAM No-Drill TM Seat BasesNational Products, Inc.

Item NumberRAM-VB-192-SW1

Chevrolet City Express (2015)Nissan NV200 S Compact Cargo (2013-2015)Nissan NV200 SV Compact Cargo (2013-2015)