rain sensor kit - amazon web services

3
www.monodraught.com [email protected] 1 The Rain Sensor Kit comprises of: IN0043 IP65 DIN rail Enclosure for liquid detection module, IN0042 Liquid detection module and IN0040 Rain Sensor. The kit provides detection of rain through a volt-free changeover relay output. The Rain Sensor incorporates a heater to dry the sensor post sensing event and to prevent erroneous detection of mist etc. This kit is suitable for most applications requiring precipitation detection and is recommended for use with Monodraught iNVent control systems or third party BMS solutions. IN0043, IN0042, IN0040 Rain Sensor Kit

Upload: others

Post on 04-Jan-2022

10 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Rain Sensor Kit - Amazon Web Services

[email protected]

1

The Rain Sensor Kit comprises of: IN0043 IP65 DIN rail Enclosure for liquid detection module, IN0042 Liquid detection module and IN0040 Rain Sensor. The kit provides detection of rain through a volt-free changeover relay output. The Rain Sensor incorporates a heater to dry the sensor post sensing event and to prevent erroneous detection of mist etc.

This kit is suitable for most applications requiring precipitation detection and is recommended for use with Monodraught iNVent control systems or third party BMS solutions.

IN0043, IN0042, IN0040Rain Sensor Kit

Page 2: Rain Sensor Kit - Amazon Web Services

[email protected]

2

TECHNICALSPECIFICATIONS

Technical Details

Rain Sensor Kit

Output Relay Type Delay to Active Relay Rating

Rain Changeover (NO Mode Commonly Utilised) 6 seconds

240 V 3A Max (Low voltage digital input

preferred)

Outputs

Wiring Details DimensionsIN0043

IN0042

IN0040

MaterialIN0043: Flame Retardant Polystyrene (Polycarbonate Door)

IN0042 and IN0040: Enclosures are manufactured from Flame Retardant Polycarbonate.

Operating Conditions

-10˚C to 40˚C

10% - 80% RH non-condensing (IN0040: 0 - 100% RH with IP65 gland)

Mounting

Liquid detection module (IN0042) to be mounted inside the building and within the supplied enclosure (IN0043)Rain Sensor (IN0040) to be mounted on the roof with the sensing element facing upwards, clear of any obstructions like pier walls or higher buildings in all directions for at least 20m

Dimensions

IN0043: 100 mm x 150 mm x 96 mm

IN0042: 55 mm x 90 mm x 58 mm

IN0040: 60 mm x 75 mm x 36 mm

TerminalsCable size 2mm2 max

240V cables to be sized to suit spur rating

Cable size 0.5 mm2 multi-strand recommended for all low voltage

ProtectionIN0043: IP65

IN0042: IP20

IN0040: IP65

Power Supply IN0042: 240V AC +/- 15% @ 40 mA Max

96100

150

55

90

58

3660

75

96100150

55

90

58

3660

75

24V 0 1 1

RelayOn

NO NC COM240VL N

SEN

1 2 3 4

Hea

ter 2

4V

Hea

ter 0

V

Sens

or

Sens

or

To Control System(Digital Input / Contact

Closure Detection)

240 V SwitchedFused Spur

Rain Sensor

Liquid Detection M

odule

Page 3: Rain Sensor Kit - Amazon Web Services

Halifax House, High WycombeBuckinghamshire, HP12 3SE

+44 (0) 1494 897700

www.monodraught.com

[email protected]

Follow us on: