railway - telford55.comtelford55.com/wp-content/uploads/railway-catalog.pdf · construction –...

RAILWAY

2012

CONSTRUCTION – GENERAL CONSTRUCTION

CONSTRUCTION – QUICK HITCHES & BUCKETS

CONSTRUCTION – TILT ROTATORS

CONSTRUCTION – LANDSCAPING & SNOW REMOVAL

CONSTRUCTION – UTILITIES

SCRAP PROCESSING

DEMOLITION

MATERIAL HANDLING

RAILWAY CUSTOM UNITS

kinshofer Worldwide

What has now become a worldwide operating company once started in a small garage in the Bavarian uplands. Innovation and quality have made the company what it is today: a global player in the construction industry. Kinshofer can count on a range of subsidiaries and sales offices worldwide to promote its products.

Kinshofer France S.A.R.L. FRANCE

1986

Kinshofer Aponox Oy FINLAND2009

Kinshofer North America CANADA2000

Kinshofer UK UNITED KINGDOM1984

Kinshofer GmbHHeadquarters Marienstein, GERMANY1971

DEMAREC B.V. THE NETHERLANDS

2006

RF-System ABSWEDEN2011

Darda Kinshofer Construction Machinery Co. Ltd.

PR CHINA2008

A History of Quality and Success For more than 40 years we have specialized in the development and construction

of quality attachments for cranes and excavators. Within the industry, our name has become synonymous for innovation, quality and reliability!

ALWAYS IN MIND – OUR CLIENT‘S NEEDS

THERE IS NO ALTERNATIVE TO QUALITY

KINSHOFER GmbH is one of the leading manufacturers of attachments for loader cranes and hydraulic excavators, as well as for rotators, tilt rotators and rotary actuators. The headquarters of the medium-sized company is located in the Bavarian village Waakirchen/Marienstein, Germany. • August 4, 1971: Originally named KINSHOFER Maschinenbau Miesbach, the company was founded by Alfred Kinshofer on in Miesbach, Bavaria, Germany. At the beginning the small business only produced bridge bearings, handrails and accessories for brick factories, such as tunnel kiln trucks or lifting and lowering devices for tile presses. Two years after the company‘s founding, the development of the first brick stack grapple began. Just one year later, the construction of a pallet fork and a clamshell bucket followed. • 1975: As the capacities of the original factory had been exhausted, a new plant was built in eastern Miesbach. Only two years later, this building had grown too small again, so a second building was constructed with additional office buildings. • 1979: The company‘s first rotator with 360° endless rotation was developed.• 1980: The Company changed its name to KINSHOFER Greiftechnik GmbH, and the first sales activities in the United States and the UK took place.• 1984: the first foreign sales subsidiary of the company was founded in Stockport, Cheshire, England: KINSHOFER UK Ltd.• 1987: Alfred Kinshofer sold his shares in, but kept being a worthy consultant for the company. The same year, KINSHOFER France was founded in Strasbourg, France.• 1997: Planning began in for factories in the Austrian village of Gmünd and the Czech Ceske Velencie, and one year later MARS Greiftechnik was founded and production started.• 2000: KINSHOFER made the step overseas and acquired the Canadian company Liftall which was to become the subsidiary KINSHOFER North America• 2003: A major milestone for KINSHOFER occurred: the development of the patented HPXdrive that bestowed the if-Silver Award for ”Product Design“ in the ”Industry“ branch upon the company.• 2006: The company finally got its current name: KINSHOFER GmbH. The same year, the Dutch specialist for demolition and recycling tools, Demarec B.V., was acquired.• 2007: The worldwide operating Swedish company, Lifco AB, acquired KINSHOFER GmbH.• 2008: Another logical consequence was the expansion to the east, and so the company Darda KINSHOFER Construction Machinery Co. Ltd. was founded in the Chinese capital of Beijing. The same year marks the foundation of KINSHOFER Aponox Oy in Hämeenlinna, Finland, with the main focus on NOX Tilt Rotators.• 2011: KINSHOFER acquired the Swedish company RF-System AB., providing an extensive line of attachments for the Railroad industry, in addition to attachments and couplers for the Construction industry. • 2012: Intellectual Property and distribution rights were acquired from the New Zealand company, Wedgelock Equipment Ltd. These rights further expanded KINSHOFER’s offering in the Construction segment.

KINSHOFER counts on a high vertical integration. The products are designed in the proper development department, constructed and finally tested in the in-house test laboratory. Thus the company retains control not only over the production, but also the product itself.Constant communication and information exchange between the company and its clients results in further developments and innovations that keep the company close to the customer. In the Action Park at the company‘s headquarters, there is also the possibility for dealers and clients to take part in training and tool demonstrations.

Always close to the client – up front, everywhere . . . .

Many Applications - One Solution: kinshofer Over 40 years of experience as well as involvement with en d users in the development process, combined with the latest engineering tools, have led to KINSHOFER‘s comprehensive product range.

Scrap Metal Scrap Tires Scrap Rails

Scrap processing has become an increasingly important concern throughout the world. Scrap metal has to be cut, broken, handled, separated, processed and recycled, similar to plastic, glass, and tires.Rail scrap processing is just one important part of the large scrap industry.At KINSHOFER you will find the perfect tool for your task, no matter if you want to cut beams, rails, tires, containers, tanks or entire ships! Entrust KINSHOFER with your scrap processing task – we will find the perfect solution for you!

Within the range of attachments for construction, you can find different and versatile tools made by KINSHOFER for tasks from landscaping to road construction. Buckets and Clamshell buckets for different ope-rating weights and in different widths, suitable adapters and quick hitches are part of the product range as well as smaller demolition and sorting grabs, multi purpose grabs, rock grabs, augers and brushes for dirt and snow removal. Innovations not missed are the unique cylinderless nox tilt rotator, the revolutionary HPXdrive – no hoses, no hydraulic cylinders, easy shell ex-change and absolutely maintenance-free – or the C-VE series with its fast shell exchange system!

Landscaping / Snow Removal Road Construction Civil Engineering Utilities

Primary Demolition Secondary Demolition Steel

No matter if demolishing, breaking, pulverizing or separating – with attachments for demolition and recycling you will always have the perfect tool.With attachments for a broad scope of machines, reaching from demolition grabs for lighter weight excavators up to dedicated shears for excavators of up to 80t operating weight – the perfect solution for each weight and task is available.Innovations do not fall short: the MQP with its strong power thanks to the - cylinder, or the , making the exchange of jaws possible within only a few minutes on site!

Many Applications - One Solution: kinshofer Over 40 years of experience as well as involvement with en d users in the development process, combined with the latest engineering tools, have led to KINSHOFER‘s comprehensive product range.

It makes no difference whether you are loading or discharging boat or train carriages, handling scrap or wood or performing demolition tasks – within the KINSHOFER range »Material Handling« you are sure to find the optimal tool. Excavators from 11t to 80t operating weight can be equipped. Orange peel grabs with different capacities and designs are part of the available tools as well as demolition and sorting grabs, re-handling clamshell buckets or timber grabs. Outstanding: the extraordinary C80H re-hand-ling clamshell bucket with the incredible volume of 5000 litres!

Waste Bulk Material & Dry Cargo Timber

Construction Off-Shore Nuclear Pipeline / Geothermal

As the tasks to be accomplished are becoming more and more complex, the requirements to be met increase accordingly. Many times, no standard tool can meet to solve clients‘ demands and thus, only a custom-made product can solve the problem. Our existing products for custom and special solutions range from tools for off-shore operations, nuclear tasks to geothermal appli-cations. You have a certain problem on hand requiring a special solution? KINSHOFER will find the perfect answer for you and your task!

There is hardly another invention that has changed the transport system as much as the railway. Railroads have, and continue, to play a large role in the way people and products are transported around the world. It is vital that railways are kept operational and safe.No matter if it is about the construction, maintenance or demolition of railroad tracks: the KINSHOFER range meets every demand, ranging from sleeper layers and ballast tampers to large mobile rail cutters. Find everything you need and more in one single company!

Rail Track Maintenance Scrap Rails

RAILWAY ... . . . application includes the construction of railway tracks,

their maintenance, demolition, and ultimately scrapping. No matter what task, Kinshofer has the solution!

The railway is one of the most important transport systems in the world and thus railtracks run through almost every country on earth. As this extended system depends on its availability and reliability, it has to be constructed and maintained in a fast and accurate way. From the excavation works needed for the right positioning of tracks or cable pits, the compaction of the ballast, the handling and positioning of sleepers, ballast and rail tracks, to the maintenance of the constructed railtrack system, and finally up to the demolition and ultimate scrapping: Kinshofer has every tool for your Road Rail Excavator or Loader Crane.

The RC 26 R HDMobile Rail Cutter breaks rails without problem

For the optimal compaction of the ballast, there is only one choice:

the RST Ballast Tamper

The Sleeper Changing Unit RBS removes and places sleepers in existing railtracks

GRL Cable Lid Grapple for efficient lid handling

With the C-VE Clamshell Bucket,

the ballast can be removed

from in between the sleepers

The RUS Sleeper Layer handles several sleepers at once and fits different sizes

For levelling and distributing ballast: the SKB-Ballast Sweeper Roller

The KM 930 Manipulator can be mounted to cranes as well as to excavators

With the Lid Opener LOP, cables and hoses can be positioned in already existing cable pits

7

Contents

Cata

log

effec

tive

July

201

2

—> Further information about KINSHOFER products can be found on our web site www.kinshofer.com

Summary Listed by Operating Weight of Excavator

NOX Tilt Rotators

Tilt Rotator for excavators with 3 t/6600 lbs up to 25 t/55000 lbs operating weight: TR06NOX / TR10NOX / TR18NOX / TR25NOX 9

Railroad Grapple

Railroad Grapple for Loader Cranes: KM 632Rc 10

Railroad Grapple

Railroad Grapple for Loader Cranes: KM 632-2-R 11

Sleeper Changing Unit

Sleeper Changing Unit for Excavators 10 t/22000 lbs up to 24 t/52800 lbs operating weight: RBS 12

Sleeper Layer

Sleeper Layer for Excavators with 12 t/26400 lbs to 24 t/52800 lbs operating weight: RUS 13

Sleeper Grapple

Sleeper Grapple for Excavators up to 20 t/44000 lbs operating weight: KSG 05 / KSG 10 / KSG 15 14

Ballast Tamper

Ballast Tamper for Excavators up to 24 t/52800 lbs operating weight: RST 02 / RST 03 / RST 04 15Double Ballast Tamper for Excavators up to 24 t/52800 lbs operating weight: RST 0202 / RST 0303 16

Ballast Brush

Ballast Sweeper Roller for all Loaders and Excavators with operating weight >1 t/2200 lbs: SKB-Ballast 17

Sweeper Roller & Rotor Brush

Sweeper Roller for all Loaders and Excavators with operating weight >1 t/2200 lbs: SKB 10 / SKB 15 / SKB 26 / SKB 30 18Rotor Brush for Excavators up to 20 t/44000 lbs operating weight: ROB 20 18

Bucket Sweeper

Bucket Sweeper for Excavators with 5 t/11000 lbs up to 24 t/52800 lbs operating weight: SKS 0904 / SKS 1104 / SKS 1106 / SKS 1225 / (available for Loaders too) SKS 1375 / SKS 1685 / SKS 1856 / SKS 2356 / SKS 2506 19Ballast Bucket Sweeper for Excavators up to 24 t/52800 lbs operating weight: SKS-Ballast 19

Levelling Plough

Levelling Plough for all Excavators with operating weight >1 t/2200 lbs: AVP 20

Lid Opener

Cable Trench Lid Opener for Excavators from 4 t/8800 lbs up to 24 t/52800 lbs operating weight: LOP 21

Lid Grapple

Cable Trench Lid Grapple for Excavators from 4 t/8800 lbs up to 24 t/52800 lbs operating weight: GRL 22

Cable Cutter

Cable Cutter for Excavators up to 24 t/52800 lbs operating weight: KST 11 23

KINSHOFER Grapples with Shell Exchange System C-VE

Clamshell Buckets for Excavators up to 12 t/26400 lbs operating weight: C12VE 24Exchangeable Shells & Grippers for C12VE 25

Clamshell Buckets for Excavators up to 18 t/39600 lbs operating weight: C18VE 26Exchangeable Shells & Grippers for C18VE 27

Exchangeable Shell System C-VE 28

Mobile Rail Cutting Shear

Mobile Rail Cutting Shear for Excavators up to 26 t/57200 lbs operating weight: RC 26 R HD 29

Tree and Metal Cutter

Tree and Metal Cutter for Excavators up to 30 t/66000 lbs operating weight: TKL 22 / TKL 30 / MKL 22 30

Thicket Cutter Bar

Thicket Cutter Bar for Excavators up to 18 t/39600 lbs operating weight: HXX 150 / HXX 225 31

3-Axes-Manipulator3-Axes-Manipulator for Loader Cranes / Static Cranes: KM 931 32

Brush Cutter

Brush Cutter for Excavators from 6 t/13200 lbs up to 25 t/55000 lbs operating weight or Loader Cranes: SLA 2 / SLA 4 / SLA 6 / SLA 12 / SLA 14 / SLA 20 33Manipulator

Manipulator for Loader Cranes: KM 930 34

Fork SetFork Set for Excavators up to 24 t/52800 lbs operating weight: GAF 6 / GAF 8 / GAF 12 / GAF 18 / GAF 20 / GAF 24 35

Augers and Drives

Drive Units for Excavators with 3 t/6600 lbs to 10 t/22000 lbs operating weight: AS03 / AS05 / AS08 / AS10 36Augers: BS-100 to BS-800 for Standard and Heavy Duty 37

Drive Units and Augers for Excavators: BAD / HYK / BOR 38

Road-Rail WagonRoad-Rail Wagon: JVV 39

8

Summary Listed by Operating Weight of Excavator

Type Operating Weight of Excavator (t)

NOX Tilt Rotator1 2 3 4 5 6 7 8 9 10 11 12 14 16 18 20 22 24 25 30

TR06NOXTR10NOXTR18NOXTR25NOX

Sleeper Changing Unit1 2 3 4 5 6 7 8 9 10 11 12 14 16 18 20 22 24 25 30

RBS

Sleeper Layer1 2 3 4 5 6 7 8 9 10 11 12 14 16 18 20 22 24 25 30

RUS 03RUS 04RUS 06

Sleeper Grapple1 2 3 4 5 6 7 8 9 10 11 12 14 16 18 20 22 24 25 30

KSG 05KSG 10KSG 15

Ballast Tamper / Double Ballast Tamper1 2 3 4 5 6 7 8 9 10 11 12 14 16 18 20 22 24 25 30

RST 02RST 03RST 04 RST 0202RST 0303

Bucket Sweeper1 2 3 4 5 6 7 8 9 10 11 12 14 16 18 20 22 24 25 30

SKS 0904/1104SKS 1106SKS 1225SKS 1375SKS 1685SKS 1856/2356SKS 2506

Lid Opener1 2 3 4 5 6 7 8 9 10 11 12 14 16 18 20 22 24 25 30

LOP 02LOP 05

Lid Grapple1 2 3 4 5 6 7 8 9 10 11 12 14 16 18 20 22 24 25 30

GRL

Clamshell Buckets with Exchangeable Shells 1 2 3 4 5 6 7 8 9 10 11 12 14 16 18 20 22 24 25 30

C12VEC18VE

Mobile Rail Cutter1 2 3 4 5 6 7 8 9 10 11 12 14 16 18 20 22 24 25 30

RC 26 R HD

Augers with Drive Unit1 2 3 4 5 6 7 8 9 10 11 12 14 16 18 20 22 24 25 30

AS03AS05AS08AS10

Thicket Cutter Bar1 2 3 4 5 6 7 8 9 10 11 12 14 16 18 20 22 24 25 30

HXX 150HXX 225

Tree and Metal Cutter1 2 3 4 5 6 7 8 9 10 11 12 14 16 18 20 22 24 25 30

TKL 22TKL 30MKL 22

Fork Set1 2 3 4 5 6 7 8 9 10 11 12 14 16 18 20 22 24 25 30

GAF 06GAF 08GAF 12GAF 18GAF 20GAF 24Bohrschnecken Legend:

vertical cylinder (V = vertical, type E = with exchangeable shells)

others

9We reserve the right to amend specifications without prior notice! KINSHOFER GmbH, D-83666 Waakirchen, Germany

TR06NOX / TR10NOX / TR18NOX / TR25NOX Tilt RotatorsExperience and innovation have led to one of the most advanced tools for excavators – the NOX Tilt Rotator: continuous 360° rotation and a tilting angle of 2 x 45° to 2 x 55° make it a universal joint. Combined with quick change system and various attachments this means highest efficiency at any construction site. The NOX Tilt Rotator range is optimally engineered to suit excavators with an operating weight of 3t/6600 lbs to 25t/55000 lbs.Advantages:l Precision and safety due to ”smooth“ proportional control (optional).l High stability and long service life thanks to special cast housing.l Low overall height thanks to elliptic rotary actuator: large travel.l High and constant tilt force due to cylinderless rotary actuator.l No protruding parts: excavation with narrow bucket in small, deep canals, even under or in between existing tubes.l Low maintenance: worm drive runs in permanent greasing.

Tota

l hei

ght d

epen

ding

on

mou

nted

ada

pter

s

10 t … 15 t … 20 t … 25 t … 32 t … 40 t … 50 t…5 t…3 t

Tilt Rotator TR06NOX / TR10NOX / TR18NOX / TR25NOX with 360° rotationType Excavator Self Width Length Height max. max. Tilting Tilting Rotating Rotations Rotary

operating 1) A2) B2) C2) Volume Width angle torque3) torque4) / min feed-weight (approx. bucket bucket through (t/lbs) lbs) (in) (in) (in) (cu.ft) (in) (°) (ft.lbs) (ft.lbs) (RPM) (GPM)

TR06NOX >3-6/6600-13200 264 14.15 19.70 14.55 8.35 1200 2 x 50 6270 constant 5531 9,05) 10.57

TR10NOX >5-10/11000-22000 484 16.20 24.00 17.50 16.65 1600 2 x 55 8850 constant 5531 7,55) 10.57 [18.507]

TR18NOX >9-18/19800-39600 1012 17.70 29.15 20.85 33.35 2000 2 x 50 18440 constant 6195 7,06) 31.70

TR25NOX >15-25/33000-55000 1364 21.00 30.05 23.50 43.35 2200 2 x 45 25815 constant 7670 5,76) 31.701) Total weight incl. upper bracket, excl. quick coupler 2) Reference: TR06NOX S40/S40, TR10NOX S50/S50, TR18NOX S60/S60, TR25NOX S70/S70 3) at 3600 psi 4) at 3240 psi and vertical axis 5) CSP & CSS at 7.93 GPM 6) CSP & CSS at 10.57 GPM 7) for DF8 and DF10 control system

Standard package consists of: Tilt Rotator, electric control system, upper suspension or coupling, lower coupler or quick change

ControlType DescriptionCSS 8) all functions are controlled by on/off solenoid valves and can be run simultaneouslyCSP 9) tilt and rotation are controlled by proportional solenoid valves and can be run simultaneously,

extra function and quick coupler are controlled by on/off valvesDF4 8) for each function (rotate & tilt) separate double acting hydraulic circuit on excavator dipper (not upgradable)DF8 8) for each function (rotate, tilt, quick change, Extra 1) separate double acting hydraulic circuit on excavator dipperDF10 8) for each function (rotate, tilt, quick change, Extra 1, Extra 2) separate double acting hydraulic circuit on excavator dipper8) original excavator control remains 9) installation of KINSHOFER comfort control

Control System CSS consists of: controlbox, wiring from existing control sticks to Tilt RotatorControl System CSP consists of: controlbox, 2 joystick grips SVAB L8, wiring from joysticks to Tilt Rotator, proportional pressure control valve

AccessoriesGripper Description Self Dimensions max. Opening Closing Closing Load

weight D x E x F10) width G time11) force capacityType hydraulic Gripper Module, rigidly (approx. lbs) (in) (in) (sec) (lbf) (lbs)TRG06 S40 mounted to the NOX, can be 88 18.5 x 20.3 x 5.5 16.35 1.5 1650 660TRG10 S45/50 used to pose masts, tubes etc. 176 23.6 x 26.6 x 8.1 24.00 1.3 2200 1100TRG18 S60 without the necessity of 249 27.6 x 28.2 x 10.4 28.05 1.7 3960 1980

changing an attachment 10) see techn. drawing 11) at 6.61 GPM

Requirements of ExcavatorHydraulic system: Minimum of one single acting hydraulic circuit (hammer valve with free return line to tank)

Double acting hydraulic circuit equally possible for DF8 and DF10 models (not CSP/CSS)Operating pressure: 3600 psi; max. backflow pressure 72 psiElectrics (for CSS and CSP): Electric supply 12V or 24 V

Technical Drawings

quick coupler

lower quick hitchcontinuous rotation (360°) tilt a

ngle GripperTRG06

Tilt Rotator TR25 S70 S70

C

B AG

E

D

F


Railroad Grapple KM 632Rc

Railroad Grapple KM 632Rc

Type Capacity Width max. Opening A Height B Height C Self weight Load capacity Closing force(closed incl.

rotatator)(open incl. rotatator)

(cord / sq ft) (in) (in) (in) (in) (lbs) (lbs) (lbf )KM 632R-0.25 c 1/4 / 3 3/4 23 69 42 54 970 6600 4950KM 632R-0.33 c 1/3 / 5 1/2 23 78 47 59 1025 6600 4270KM 632R-0.50 c 1/2 / 8 23 96 50 67 1315 6600 3370

Package consists of: railroad grapple, KINSHOFER rotator KM 04 F140-30US, short connecting hoses (between rotator and grab), upper suspension KM 501 4500, removable synchronizing gears, non-return valve

Accessories

Type Description

KM 505 HD Quick Change System Set for KINSHOFER Shaft Rotators, incl. hydraulic couplingsKM 685 06 eye / hook set 2 welded eyes / welded hooks (2 pieces)

Requirements of Truck Crane

Operating pressure: 3770 psiPump capacity: 6.5 to 20.0 GPM

Technical Drawings

Designed to handle the various demands of the rail, the KM 632Rc can be used for rail, bundled or individual ties. This robust and versatile tool is for use on loader cranes.

l The railroad grapple is ideal for handling railroad ties and rails and for clearing brush.l Long service life is ensured by the sturdy construction and high quality components.l Reduced wear resulting from generously dimensioned bearing system.l Tine tips are vertical when the grapple is fully opened, allowing easy loading and unloading of bundled ties - directly from gondola cars.l Exchangeable gears are standard and ensure synchronized movement of tines.l Each arm is equipped with a heavy duty hydraulic cylinder, providing an

extremely high clamping force.l The gear-type continuous rotator allows precise positioning of the grapple.l Guaranteed safety in case of pressure drop due to non-return valve.


600D

85

920

1600

Railroad GrappleKM 632-2-R

Railroad Grapple KM 632-2-R

Type Capacity Width max. Opening A Height B Height C Self weight Load capacity Closing force(closed w/o

rotator)(open w/o

rotator)(cord / sq ft) (in) (in) (in) (in) (lbs) (lbs) (lbf )

KM 632R-2-R 1/3 / 5 1/2 24 78 47 54 780 6685 3080

Package consists of: railroad grapple, KINSHOFER rotator KM 04 F140-30US, short connecting hoses (between rotator and grab), upper suspen-sion KM 501 4500, removable synchronizing gears, non-return valve

Accessories

Type Description

KM 505 HD Quick Change System Set for KINSHOFER Shaft Rotators, incl. hydraulic couplingsKM 685 05 adapters for & with compression rails KM 685 06 eye / hook set 2 welded eyes / welded hooks (2 pieces)KM 685 central eye welded eye (1 piece)


Operating pressure: 2900 psiPump capacity: 6.6 to 19.8 GPM

Technical Drawings

Designed to handle the various demands of the rail, the KM 632-2-R can be used for rail or ties. This robust and versatile tool is for use on loader cranes.

l The railroad grapple is ideal for handling railroad ties and rails and for clearing brush.l Long service life is ensured by the sturdy construction and high quality components.l Reduced wear resulting from generously dimensioned bearing system.l Tine tips are vertical when the grapple is fully opened, allowing easy loading and unloading of bundled ties - directly from gondola cars.l The tool is equipped with two horizontal hydraulic cylinders, providing an extremely high clamping force.l The gear-type continuous rotator allows precise positioning of the grapple.l Guaranteed safety in case of pressure drop due to non-return valve.


6 t3 t 8 t 10 t 12 t 14 t 16 t 18 t 20 t 22 t 24 t 26 t 28 t 30 t

RBSSleepers of any kind can be removed and placed with the Sleeper Changing Unit RBS. The unit suits excavators from 10 t/22000 lbs to 24 t/52800 lbs operating weight.

l Efficiency: the large shield helps clearing / preparing the track. The sleeper is grabbed by two hydraulically operated grippers and then pulled out from the ballast bed. Once the new sleeper is placed, the shield can be used to level the ballast. Rational use.

l Safety: a special holding valve provides a safe grip – even if pressure drops.

l Precision: exact positioning is enhanced by adjustable end stops.l Integrated adapter to fit to a tilt rotator or quick coupler.l Light weight made of HARDOX quality steel.l Adjustable depth allows for more flexibility.

Sleeper Changing Unit

Sleeper Changing Unit RBS

Type Gripping Weight Length Height Width Gripper elements Load Operatingrange A B C D capacity weight

(in) (lbs) (in) (in) (in) (pieces) (lbs) (t/lbs)RBS 0 - 17.3 880 106.3 39.6 53.5 2 4400 10 - 24 / 22000 - 52800

Package consists of: sleeper changing unit, welded coupling

Requirements of ExcavatorTwo hydraulic circuits neededOperating Pressure: max. 2880 psiPump capacity: 7.93 - 15.85 GPMDifferent couplings available

Technical Drawings & Pictures


6 t3 t 8 t 10 t 12 t 14 t 16 t 18 t 20 t 22 t 24 t 26 t 28 t 30 t

B

CD

D

A A A A

With the Sleeper Layer RUS mounted to a tilt rotator or similar, concrete sleepers can be moved easily and effectively – for road rail excavators from 12 t/26400 lbs to 24 t/52800 lbs operating weight.l Low weight.l Efficiency: several concrete sleepers are clamped together at the same

time by hydraulic grippers and then layed into the ballast bed. This saves time compared to placing sleepers individually.


l Variable gripping range: the position of the traversing arms can vary within the specified range.

l Longevity: traversing arms are made of HARDOX quality steel.l Flexibility: suitable for nearly all types of waisted sleepers.l For narrow areas close to sidetracks and foundations, as the layer grabs

the sleepers in the center.l Optional: extension for positioning sleepers beneath existing rails.

RUS

Sleeper Layer RUS

Type Gripping Weight Length Height Width Number of Load Operatingrange A B C D sleepers capacity weight

(in) (lbs) (in) (in) (in) ( max. pieces) (lbs) (t/lbs)RUS 03 5.9 – 13.0 1056 94.5 19.7 22.8 3 4400 12 - 24 / 26400 - 52800RUS 04 5.9 – 13.0 1056 ( - ) 19.7 22.8 4 ( - ) 12 - 24 / 26400 - 52800RUS 06 5.9 – 13.0 1650 ( - ) 19.7 22.8 6 ( - ) 16 - 24 / 35200 - 52800

Package consists of: sleeper layer, bolt-on coupling

Sleeper Layer

Requirements of ExcavatorTwo hydraulic cycles and electric valve needed, or four hydraulic cycles without electric valveOperating Pressure: max. 2880 psiPump capacity: 7.93 - 15.85 GPMDifferent couplings available



6 t3 t 8 t 10 t 12 t 14 t 16 t 18 t 20 t 22 t 24 t 26 t 28 t 30 t

KSGThe KSG Sleeper Grapple is an efficient tool for handling and positioning sleepers. Depending on the type, the grapple is available for excavators from 3 t/6600 lbs to 14 t/30800 lbs operating weight.

l Rubber-coated surfaces: the sleeper is optimally protected against damage during handling.


l Different applications: rails, curbstones, timber, stones, etc.l Integrated adapter to fit to a tilt rotator or quick coupler.l Different couplings available.l Changeable opening for different sleepers.

Sleeper Grapple

Sleeper Grapples KSG

Type Opening Opening Weight Width Load Operatingmin. max. capacity weight(in) (in) (lbs) (in) (lbs) (t/lbs)

KSG 05 5.3 13.8 165 7.9 1760 3 - 8 / 6600 - 8800KSG 10 5.3 13.8 165/209* 7.9 2200 8 - 11 / 17600 - 24200KSG 15 5.3 13.8 253 7.9 3300 11 - 14 / 24200 - 30800* depending on coupling

Package consists of: sleeper grapple, welded coupling


Pictures


B

C

D

A

6 t3 t 8 t 10 t 12 t 14 t 16 t 18 t 20 t 22 t 24 t 26 t 28 t 30 t

With the RST Ballast Tamper mounted to e.g. a tilt rotator, the embedding of sleepers is fast, most efficient and productive – suitable for road rail excavators from 3 t/6600 lbs to 24 t/52800 lbs operating weight.

l Low weight.l Complete with high frequency vibrating unit (except RST 04).l Efficiency: the powerful, but low-noise ballast tamper destabilizes the

ballast while its built-in vibrating unit is running. The four arms of the tamper are pushed into the ballast bed and compact it by vibration. By moving the arms towards and beneath the sleeper, the ballast is compacted optimally.

l Flexibility: adjustable arms and force.l High and flexible frequency.l Low noise operation.l Strong vibration rubbers for low vibration against the machine.l Adjustable tamping depth.

Ballast Tamper

Ballast Tampers RST

Type Gripping Weight Length Height Width Gripper elements Compaction Operatingrange A B C D force weight

(in) (lbs) (in) (in) (in) (pieces) (lbs) (t/lbs)RST 02 7.7 - 25.6 814 32.7 49.4 20.7 4 7700 3 - 10 / 6600 - 22000RST 03 7.7 - 25.6 946 32.7 51.6 20.7 4 16500 12 - 24 / 26400 - 52800RST 04 7.7 - 25.6 792 - - - 4 - 14 - 24 / 30800 - 52800

Package consists of: ballast tamper, vibrating unit (except RST 04), bolt-on or welded coupler

RST

Requirements of ExcavatorFour hydraulic circuits neededOperating Pressure: max. 2880 psiPump capacity: 10.6 -34.4 GPM (free line to tank required)Different couplings available



6 t3 t 8 t 10 t 12 t 14 t 16 t 18 t 20 t 22 t 24 t 25 t 28 t 30 t

With the RST Double Ballast Tamper mounted to e.g. a tilt rotator, the embedding of sleepers is fast, efficient and productive – suitable for road rail excavators from 12 t/26400 lbs to 25 t/55000 lbs operating weight.

l Low weight.l Complete with vibrating unit.l Efficiency: the powerful, but low-noise ballast tampers

destabilize the ballast while the built-in vibrating units are running. The arms of the tampers are pushed into the ballast bed and compact it by vibration. By moving the arms towards and beneath the sleeper, the ballast is compacted optimally.

l Flexibility: adjustable arms and force.

Double Ballast TamperRST 0202 / RST 0303

Requirements of Excavator

Two hydraulic circuits neededOperating Pressure: max. 2880 psiPump capacity: 10.6 - 31.7 GPMDifferent couplings available

Picture

Double Ballast Tampers RST 0202 and RST 0303

Type Gripping Weight Length Height Width Gripper Compaction Operatingrange A elements force weight

(in) (lbs) (in) (in) (in) (pieces) (kg) (t/lbs)RST 0202 2 x 7.7 - 25.6 1914 32.7 + gauge* 49.4 20.7 8 2 x 7700 12 - 18 / 26400 - 39600RST 0303 2 x 7.7 - 25.6 2420 32.7 + gauge* 51.6 20.7 8 2 x 16500 14 - 25 / 30800 - 55000

*European standard gauge: 56.5 inPackage consists of: double ballast tamper, middle track


6 t3 t 8 t 10 t 12 t 14 t 16 t 18 t 20 t 22 t 24 t 25 t 28 t 30 t

The SKB-Ballast Brush is the perfect tool for levelling and distributing ballast. Cleaning the track after filling it up with ballast has never been easier. Available for loaders as well.

l Wide range of widths: 11.8 in - 118.1 in available, sweep diameter is 37.4 in.

l Efficiency: can be equipped with different brushes for different applications. The same frame can be used for different rollers.

l Rubber hoses (13 in) sweep away ballast without damaging rails or sleepers.

Ballast Sweeper SKB-Ballast

Type Rubber Sweep Weight Length Height Widthlength diameter

(in) (in) (lbs) (in) (in) (in)SKB-Ballast 10 13 37.4 616 39.4 47.2 47.2SKB-Ballast 15 13 37.4 770 59.1 47.2 47.2SKB-Ballast 26 13 37.4 924 102.4 47.2 47.2SKB-Ballast 30 13 37.4 1045 118.1 47.2 47.2


Two hydraulic circuits neededOperating Pressure: max. 2880 psiPump capacity: 15.9 - 52.8 GPMDifferent couplings available

Pictures

Ballast Brush SKB-Ballast


SKB

ROB with plastic bristles

ROB with rubber hoses for ballast

ROB with steel bristles

2 t1 t ... 10 t 12 t 14 t 16 t 18 t 20 t 22 t 24 t 25 t 28 t 30 t

The SKB Sweeper Roller is the perfect tool for levelling slopes, lawns, gravelled areas, etc. Available for Loaders as well. The ROB Rotor Brush is used to clean smaller areas or to level gravel etc. – For excavators from 1 t/2200 lbs up to 20 t/44000 lbs operating weight.SKB:l Wide range of widths: 11.8 in - 118.1 in available, equipped with 13 in bristles.l Efficiency: can be equipped with different brushes for different applications. The same

frame can be used for different rollers. l Bristles level slopes, lawns, gravelled areas, etc.ROB:l Flexible: different brushes available (steel or synthetic bristles, rubber hoses) for all

jobs. Cleaning and flattening smaller areas or levelling loose materials such as gravel, ballast, ballast, etc.

l Optional rubber guard: if used in the public in narrow areas, you can use the brush with a rubber guard for additional security. Can be mounted on either side.

l Different couplings available. l Low oil consumption.

Sweeper Roller / Rotor BrushSKB / ROB

Sweeper Rollers SKB

Type Bristle Sweep Weight Length Height Widthlength diameter

(in) (in) (lbs) (in) (in) (mm)SKB 10 13 37.4 616 39.4 47.2 47.2SKB 15 13 37.4 726 59.1 47.2 47.2SKB 26 13 37.4 924 102.4 47.2 47.2SKB 30 13 37.4 1045 118.1 47.2 47.2

Rotor Brush ROB

Type Sweep Weight Lengthdiameter

(in) (lbs) (in)ROB 20 35.4 374 63Package consists of: rotor brush, welded coupling

Requirements of ExcavatorTwo hydraulic circuits needed Operating Pressure: max. 2880 psiPump capacity: SKB: 10.6 - 39.6 GPM ROB: 7.9 - 15.6 GPMDifferent couplings available

Pictures

ROB

SKB Sweeper Roller – for Excavators

and Loaders


6 t3 t 8 t 10 t 12 t 14 t 16 t 18 t 20 t 22 t 24 t 26 t 28 t 30 t

Bucket Sweeper SKS

SKS-Ballast

The SKS Bucket Sweepers are the perfect tools for flattening and carrying surplus materials from slopes, lawns, gravelled surfaces, etc. Equipped with a ballast sweeper, ballast areas and routes can easily be flattened and cleaned up. Shovel and broom function: Surplus materials like asphalt pieces or waste like trunk chips can be taken away by means of the integrated bucket. Also available for loaders. l Different widths available: 35.4 in - 98.4 in, furnished with bristles

15.8 in - 26.6 in.l Other sizes and models available.l Efficient: can be furnished with different bristles for different jobs. For

example with rubber pipes or optionally with additional lateral rotor brush.

l Integrated bucket: picks up surplus material and waste.l Flexible: not only available for loaders, but as a combination for loaders

and excavators too. Also available with rubber hoses for ballast.

Bucket Sweeper SKS

Type Bristle Weight Width Operatinglength weight

(in) (lbs) (in) (max. t/lbs)SKS 0904 15.8 330 35.4 <6 / 13200SKS 1104 15.8 360 43.3 <6 / 13200SKS 1106 26.6 550 43.3 <12 / 26400SKS 1225 19.7 605 47.2 <14 / 30800SKS 1375 19.7 660 54.1 <16 / 35200SKS 1685 19.7 726 66.1 <18 / 39600SKS 1856 26.6 1100 72.8 <22 / 48400SKS 2356 26.6 1430 92.5 <22 / 48400SKS 2506 26.6 1672 98.4 <24 / 52800


Pictures


6 t3 t 8 t 10 t 12 t 14 t 16 t 18 t 20 t 22 t 24 t 26 t 28 t 30 t

The AVP Levelling Plough is the ideal tool to collect or spread ballast and gravel – for excavators from 8 t / 17600 lbs up to 20 t/44000 lbs operating weight.

l Easy to use: fill up the V to make a slope or pull up ballast along the track.

l For different loose materials such as gravel, ballast, etc. l Available with or without rubber blades.l Different couplings available.l Robust construction without protruding parts.

Levelling Plough AVP

Type Weight Length Height Width Coupling Operating(w/o coupling) weight

(lbs) (in) (in) (in) (t/lbs)AVP 374 47.2 31.5 31.5 S45 / S50 / S60 8 - 20 / 17600 - 44000

Package consists of: levelling plough, welded coupling

Pictures

Levelling PloughAVP


6 t4 t 8 t 10 t 12 t 14 t 16 t 18 t 20 t 22 t 24 t 26 t 28 t 30 t

The LOP Lid Opener is the ideal tool to position cables or hoses in an already existing cable trench – suitable for excavators from 4 t/8800 lbs to 24 t/52800 lbs operating weight.

l Low weight.l Efficiency: opens and closes in one single movement.l Flexibility: adjustable for different cable trenches.l Easy handling.

Lid Opener

Lid Opener LOP

Type Weight Length Height Width Trench lid Trench wall Lid Operatingmax. width thickness thickness weight

(lbs) (in) (in) (in) (in) (in) (max. in) (t/lbs)LOP 02 517 111.2 29.3 24.8 14 - 21.1 1.97 - 2.76 2.56 4 - 24 / 8800 - 52800LOP 05 462 111.2 29.3 24.8 14 - 21.1 1.97 - 2.76 2.56 4 - 24 / 8800 - 52800

Package consists of: lid opener

Pictures

LOP


5 t4 t ... 10 t 12 t 14 t 16 t 18 t 20 t 22 t 24 t 25 t 28 t 30 t

The GRL Cable Lid Grapple lifts all or just parts of pallet-stacked cable/trench lids – for excavators with 4 t/8800 lbs to 24 t/52800 lbs operating weight.

l Low self weight. l Ideal for laying new or old lids. l Handling and positioning of lids in existing cable trenches. l A special holding valve provides a safe grip – even if pressure drops.l Compression rails hold lids firmly without damaging them.

Cable Lid Grapple GRL

Type max. Load Weight Trench lid Width Operatingcapacity width weight

(lbs) (lbs) (in) (in) (t/lbs)GRL 1760 165 29.5 - 31.5 12.6 4 - 24 / 8800 - 52800

Package consists of: lid grapple


Pictures

Cable Lid GrappleGRL


With the Cable Cutter KST 11 you can cut cables with an excavator. Careful operation is first priority. For excavators with 1 t/2200 lbs to 24 t/52800 lbs operating weight. l Ideal for easy cutting of cables.l Professional clean cuts.l Robust construction for a long service life.

Cable Cutter KST 11

Type Height Width Weight max. Cablethickness

(in) (in) (lbs) (in)KST 11 12.6 39.4 77 0.16 x 9.45 / 2.36

Package consists of: cable cutter

Picture

2 t1 t ... 10 t 12 t 14 t 16 t 18 t 20 t 22 t 24 t 25 t 28 t 30 t

Cable Cutter KST 11


C12VEClamshell Bucket with exchangeable shells and vertical cylinders for excavators from 9t/19800 lbs to 12t/26400 lbs operating weight – through quick and easy exchange of shells, the C12VE is ideal for different applications, for excavation operations, landscaping, trench digging, handling of logs and more. The shells can be changed in less than four minutes.

l Economic solution as only the shells have to be exchanged to switch applications – bucket carrier, hydraulics and bearings are integrated into the main carrier.

l Long life is ensured due to the use of 500 HB steel in the manufacture of cutting edges.

l Reduced wear resulting from generously dimensioned bearing system. l Excellent digging characteristics are the result of high closing forces

(8580 lbf at an operating pressure of 4608 psi).

Clamshell Bucket C12VEType Width B Volume Number of Self weight Load capacity

(in) (c.y.) teeth (lbs) (lbs)C12VE-32 12.80 0.16 3 1045 9900C12VE-40 15.75 0.21 3 1067 9900C12VE-50 19.70 0.26 5 1100 9900C12VE-60 23.60 0.32 5 1133 9900C12VE-70 27.55 0.37 7 1155 9900C12VE-80 31.50 0.43 9 1177 9900Package consists of: clamshell bucket, bolt-on teeth, KINSHOFER rotator, non-return valve and hose guard, 2 welded eyes

KINSHOFER RotatorContinuous rotation and two oil passages. Overload protection is ensured by pressure relief valves.

Type Upper connection Torque Moment of deflection(width x pin-Ø) max.

(in) (ft.lbs) (ft.lbs)KM 10 F275-50 4.33 x 1.97 1475 10325

AccessoriesType Description

KM 501 9t-12t upper suspension without pendulum damperKM 511 9t-12t upper suspension with pendulum damperSW08 cardanic adapter for Lehnhoff grab exchange system SW/MS08 without suspension – up to 12t/26400 lbsSW10 cardanic adapter for Lehnhoff grab exchange system SW/MS10 without suspension – up to 19t/41800 lbs

adapter for quick exchange systems from other manufacturers availableKM 680 C12VE/C18VE scraper

Requirements of ExcavatorOperating pressure: max. 4608 psi Pump capacity: 10.57 - 31.70 GPM

Technical Drawings

Clamshell Bucket with Exchangeable Shells

1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t

1350 B

1645

50O 110

1570 Railroad Grab

ClamshellBucket

Rock Grab

Timber Grab

Main Carrier C12VE / C18VE

Excavating Grab1100 mm (open)

Pipe Grab


343

1008

583

777

777

556

382

411

Multi Purpose Grab679

Well Shaft Grab

310

61.8

1"

Ø1.97"

30.5

9"

53.15"

30.5

9"

64.76"

39.6

9"

4.33"

12.2

0"

22.9

5"

16.1

8"

26.7

3"

15.0

4"

21.8

9"

13.5

0"


Exchangeable Shells for C12VE

Shells are interchangeable and available in all widths. Rapid exchange with shell stand and pin exchange tool.

Type Width Opening Height Volume Number of Weight Self Load Closingrange overall teeth of shells weight capacity force

(in) (in) (in) (c.y.) (lbs) (lbs) (lbs) (lbf )Clamshell Bucket

C12VE-32S 12.80 60.45 61.80 0.16 3 286 1056 9900 8580C12VE-40S 15.75 60.45 61.80 0.21 3 308 1089 9900 8580C12VE-50S 19.70 60.45 61.80 0.26 5 363 1133 9900 8580C12VE-60S 23.60 60.45 61.80 0.32 5 396 1166 9900 8580C12VE-70S 27.55 60.45 61.80 0.37 7 451 1221 9900 8580C12VE-80S 31.50 60.45 61.80 0.43 9 495 1265 9900 8580

Excavating Grab

C12VE-32S EG 12.80 47.25 53.15 0.12 3 242 990 9900 11440C12VE-40S EG 15.75 43.30 53.35 0.07 3 275 1045 9900 12100C12VE-80S EG 31.50 31.50 53.15 0.13 9 341 1111 9900 13860

Pipe Grab

C12VE-80S PG 31.50 Ø2.9-Ø21.8 62.60 Ø 22.05 in 319 1067 9900 8580

Well Shaft Grab

C12VE-100S WSG Ø 39.40 39.40 51.95 0.13 5 308 1056 9900 13200Note: Larger shells available on request

Multi Purpose Grab

A12VE-94S 37.00 72.85 66.75 0.52 451 1210 9900 8580A12VE-122S 48.05 72.85 66.75 0.78 528 1309 9900 8580

Rock Grab

R12VE-48S 18.90 72.85 70.45 0.33 cords 440 1221 9900 6600

Timber Grab

T12VE-47S 18.50 72.25 70.65 0.33 cords 396 1177 9900 6600

Railroad Grab

C12VE-50S RG 19.70 53.15 55.30 - 297 1067 9900 9680

Package consists of: exchangeable buckets, shell stand and pin exchange tool

Please note: special buckets are availabe on request

C12VE

1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t

Exchangeable Shells


12 t 13 t 14 t 15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t 23 t 24 t 25 t 26 t 27 t

B

12560O

100

1525

1595

136015351650

67

1040

1165

C18VEClamshell Bucket with exchangeable shells and vertical cylinders for excavators up to 18t/39600 lbs operating weight – through quick and easy exchange of shells, the C18VE is ideal for different applications, for excavation operations, landscaping, trench digging, handling of logs etc. The shells can be changed in less than four minutes.

l An economic solution as only the shells have to be exchanged to suit application – bucket carrier, hydraulics and bearings are integrated into the main carrier.

l Long life is ensured due to the use of 500 HB steel in the manufacture of cutting edges.

l Reduced wear resulting from generously dimensioned bearing system with special coating.

l Excellent digging characteristics are the result of high closing forces (9240 lbf at an operating pressure of 5040 psi).

Clamshell Bucket with Exchangeable Shells

Clamshell Bucket C18VEType Width B Volume Number of Self weight Load capacity

(in) (c.y.) teeth (lbs) (lbs)C18VE-33 13.20 0.16 3 1298 9900C18VE-40 15.75 0.21 3 1331 9900C18VE-50 19.70 0.26 5 1386 9900C18VE-60 23.60 0.32 5 1441 9900C18VE-80 31.50 0.43 9 1551 9900C18VE-100 39.40 0.54 9 1661 9900

Package consists of: clamshell bucket, bolt-on teeth, KINSHOFER rotator, non-return valve and hose guard, 2 welded eyes

KINSHOFER RotatorContinuous rotation and two oil passages. Overload protection is ensured by pressure relief valves.

Type Upper connection Torque Moment of deflection(width x pin-Ø) max.

(in) (ft.lbs) (ft.lbs)KM 10 F275-60 4.92 x 2.36 1106 10325

Accessories

Type Description

KM 501 13t-25t upper suspension without pendulum damperKM 511 13t-25t upper suspension with pendulum damperSW10 cardanic adapter for Lehnhoff grab exchange system SW/MS10 without suspension – up to 19t/41800 lbsSW21 cardanic adapter for Lehnhoff grab exchange system SW/MS21 without suspension – up to 28t/61600 lbs

adapter for quick exchange systems from other manufacturers availableKM 680 C12VE/C18VE scraper

Requirements of ExcavatorOperating pressure: max. 5040 psiPump capacity: 19.82 - 39.63 GPM

Technical Drawings

Railroad Grab

ClamshellBucket

Rock Grab

Timber Grab

Main Carrier C12VE / C18VE


Pipe Grab


343

1008

583

777

777

556

382

411

Multi Purpose Grab679

Well Shaft Grab

310

30.5

9"

30.5

9"

39.6

9"

12.2

0"

22.9

5"

16.1

8"

26.7

3"

15.0

4"

21.8

9"

13.5

0"

40.9

4"

Ø2.36"

53.54"

4.92"

45.8

7"

62.8

0"

60.0

4"

2.6

4"

3.9

4"

60.43"64.96"


12 t 13 t 14 t 15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t 23 t 24 t 25 t 26 t 27 t

C18VEExchangeable Shells Exchangeable Shells for C18VE

Shells are interchangeable and available in all widths. Rapid exchange with exchanging support and extraction tool.

Type Width Opening Height Volume Number of Weight Self Load Closingrange overall teeth of shells weight capacity force

(in) (in) (in) (c.y.) (lbs) (lbs) (lbs) (lbf )Clamshell Bucket

C18VE-33S 13.20 60.45 62.80 0.16 3 352 1199 9900 9240C18VE-40S 15.75 60.45 62.80 0.21 3 396 1243 9900 9240C18VE-50S 19.70 60.45 62.80 0.26 5 429 1276 9900 9240C18VE-60S 23.60 60.45 62.80 0.32 5 495 1342 9900 9240C18VE-80S 31.50 60.45 62.80 0.43 9 605 1452 9900 9240C18VE-100S 39.40 60.45 62.80 0.54 9 715 1562 9900 9240

Excavating Grab

C18VE-33S EG 13.20 47.45 56.30 0.12 3 275 1122 9900 12540C18VE-40S EG 15.75 44.10 66.35 0.07 3 286 1133 9900 13200C18VE-80S EG 31.50 32.30 54.35 0.13 9 407 1254 9900 15180

Pipe Grab

C18VE-83S PG 32.70 Ø3.95 - Ø 23.60 64.00 Ø 23.60 in 649* 1496* 9900 9020* : incl. support

Well Shaft Grab

C18VE-97S WSG Ø 38.20 38.20 55.50 0.14 5 374 1221 9900 14300Please note: larger shells are available on request

Multi Purpose Grab

A18VE-95S 37.60 72.05 66.35 0.52 748 1595 9900 9020A18VE-122S 48.05 72.25 67.90 0.78 605 1452 9900 7040

Rock Grab

R18VE-49S 19.30 72.85 71.65 0.33 cords 429 1276 9900 7260

Timber Grab

T18VE-49S-0,5 19.30 72.05 71.85 0.33 cords 440 1287 9900 6600T18VE-49S-0,6 19.30 77.75 75.00 0.40 cords 484 1331 9900 7260

Railroad Grab

C18VE-50S RG 19.70 49.20 55.10 - 286 1133 9900 9680

Package consists of: exchangeable buckets, shell stand and pin exchange tool

Please note: special buckets are availabe on request

28

Robust grabs for excavators with revolutionary exchange system in a single device. As a new demand on site arises, the attachment can be exchanged and the new application can commence. Easy remounting of shells for excavating, landscaping, laying pipes, logging, rail track handling etc.

l Efficiency: only the shells are replaced; exchange is possible with only one person.l Fastness: easy exchange of the lynch pin from the change-over system

within 4 minutes, no hydraulic work necessary.l Robust technics: compact design through the integrated rotator. Robust shell

bearing with coexisting change mechanism.

Clamshell buckets with exchangeable shells are available for:l excavators up to 8t/17600 lbs: C08VE/ T08VE/ R08VE and other exchangeable shellsl excavators up to 12t/26400 lbs: C12VE/ T12VE/ R12VE and other exchangeable shellsl excavators up to 18t/39600 lbs: C18VE/ T18VE/ R18VE and other exchangeable shellsl excavators up to 25t/55000 lbs: C25VE and other exchangeable shells

Clos

e bu

cket

and

set

it d

own.

M

ount

the

exch

ange

su

ppor

t.

Start

Rem

ove

the

lync

h pi

n fr

om

the

chan

ge-o

ver s

yste

m0.58min.

Rem

ove

the

chan

ge-o

ver p

in

with

ext

ract

ion

tool

.

1.67min.

Posit

ion

the

buck

et c

arrie

r ove

r th

e ne

w a

ttac

hmen

t and

clo

se

the

lock

ing

unit

hydr

aulic

ally

.

2.50min.

Inse

rt th

e ch

ange

-ove

r pin

and

fa

sten

the

lync

h pi

n.3.75min.

Rem

ove

the

exch

ange

su

ppor

t. Re

ady

for u

se!4 min.

finished!

Kinshofer Exchangeable Shell System C-VE

Rock Grab

Pipe Grab

Timber Grab

Clamshell Bucket

Multi Purpose Grab

Well Shaft Grab

Operating Module

We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany


RC 26 R HD

15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t … 25 t … 27 t … 35 t 40 t 50 t … 65 t8 t 10 t 12 t 14 t 16 t 18 t … 20 t 21 t … 26 t 27 t … 30 t … 40 t … 50 t

Mobile Rail CutterThe Kinshofer Mobile Rail Cutter RC 26 R HD is a special development for the controlled demolition of rail systems and for the scrap preparation of railway lines. All current Vignol rails (flat bottom rails) with a standard quality up to 130535 lbf/in² and a profile size ”S7“ to ”UIC 60“ can be cut. Vignol rails in special qualities exceeding 130535 lbf/in² or with head hardening are excluded. The wear of the cutters highly depends on the quality of the rails. The mobile rail cutter RC 26 R HD is ideal for excavators with an operating weight of 21t/46200 lbs to 30t/66000 lbs.

Special version for the US market: Mobile Rail Cutter RC 26 R HD A.

l Inverted hydraulic cylinder for increased rod protection.l Large, heavy duty bearings for reduced bushing wear.l Housing made of extremely resistant special steel.l Heavy duty 180° rotation.

RC 26 R HD Mobile Rail CutterType Service weight Length Jaw opening Jaw depth Operating

(w/o adapter) A B C weight*(lbs) (in) (in) (in) (t/lbs)

RC 26 R HD 6600 100.40 8.10 8.10 21 - 30 / 46200 - 66000* decisive for the mounting of the shear is the payload of the excavator


RC 26 R HD back pressureOperating pressure: hydr. cylinder: max. 3600 psi 72 psi

rotation: max. 2880 psiPump capacity: max. 66.05 GPM (hydraulic cylinder), 4.76 - 6.61 GPM (rotation)

Technical Drawings

RC 26 R HD (European version)


13 t12 t 14 t 15 t ... 20 t 21 t 22 t 23 t 24 t 25 t ... 30 t 31 t

TKL / MKL Tree Cutter / Metal CutterThe Tree Cutter cuts slim trees and branches most effectively. The same applies to the Metal Cutter with metal cable channels.For excavators with 4 t/8800 lbs to 24 t/52800 lbs operating weight (or for Loader Cranes with a suitable hydraulic system). l Flexible.l TKL-HUM: cuts trees up to 5.5 in.l TKL: cuts trees up to 9.8 in or 13.8 respectively.l TKL-HUM: with rubber suspension. l MKL: cuts metal cable channels or U-Beams up to 7.9 in

and trees up to 13.8 in. l Gripper available as option for excavators.l Low oil consumption.

Tree and Metal Cutter

Type Height Width Weight Cutting max. Tree max. Metal Operatingwidth diameter 0 thickness weight

(in) (in) (lbs) (in) (in) (in) (t/lbs)TKL HUM Crane 19.7 15.8 132 51.2 5.5 - -TKL HUM 22 31.5 19.7 286 88.6 5.5 - -TKL 22 33.5 31.5 462 51.2 9.8 - 12 - 18 / 26400 - 39600TKL 30 33.5 31.5 660 88.6 13.8 - 18 - 30 / 39600 - 66000MKL 30 19.7 27.6 1430 88.6 13.8 7.9 16 - 30 / 35200 - 66000

AccessoriesType Dimensions Self max. Opening Load

height x depth weight width capacity (in) (lbs) (in) (lbs)

Gripper 20.5 x 16.7 275 47.2 6600


Operating Pressure: TKL: 3170 psi / MKL: 4320 psiPump capacity: 15.9 GPMDifferent couplings available

Pictures

Tree Cutter TKL 22

(with integrated

gripper)

Tree Cutter TKL 30 (with gripper mounted to a tilt rotator)

Tree Cutter TKL HUM


6 t3 t 8 t 10 t 12 t 14 t 16 t 18 t 20 t 22 t 24 t 25 t 28 t 30 t

HXXThicket Cutter BarThe Thicket Cutter Bar cuts easily high grass, bushes, thicket, protruding or overhanging smaller branches – or the usual mix of all together at embankments or uncultivated areas. For excavators with 3 t/6600 lbs to 18 t/39600 lbs operating weight. l Ideal for cutting thicket and branches.l Professional clean cutting.l Very strong and efficient.l Heavy construction for longevity.l Low risk, safe operation.

Thicket Cutter Bar

Type Height Width Weight Cutting max. Branch Operatingwidth thickness weight

(in) (in) (lbs) (in) (in) (t/lbs)HXX 150 19.7 53.2 253 51.2 1.18 3 - 6 / 6600 - 13200HXX 225 31.5 90.6 484 88.6 3.54 7 - 18 / 15400 - 39600


Two hydraulic circuits needed

Operating Pressure: max. 2880 psiPump capacity: 11.9 GPM (HXX 150), 15.9 GPM (HXX 225)

Different couplings available


KM 931 3-Axes-ManipulatorThe 3-Axes-Manipulator KM 931 features maximum manoeuvrability of your attachments at the loader crane‘s tip – and provides flexibility of the loader crane‘s use in any arc position.

l 3-axes-manipulator: maneuverability by three hydraulic functions: gripping, rotating and tilting (3rd hydraulic cycle needed). Endless rotation.

l High loads of 1100 lbs up to 3300 lbs are handled by KINSHOFER-Manipulators.

l Precise positioning by the KINSHOFER rotator with – mechanically acting hydraulic break for the rotating movement (KM 931-500). – or with a self-locking worm drive (KM 931-1500).

3-Axes-Manipulator KM 931

Type max. Load Slewing Tilting Rotation Self weightangle angle

(lbs) (lbs)KM 931-500 1100 135° ± 40° 360° endless 440KM 931-1500 3300 160° ± 60° 360° endless 660

Package consists of: manipulator, KINSHOFER rotator, hydraulically unlockable break / self-locking worm drive, non-return valve

Note: tubes or poles must always be taken at / near their balance point !

Accessories

Type Description

KM 980-2 solenoid valve for additional oil circuit to change over to 3 circuits (for gripping, lifting, turning) when only 2 circuits are available, ready for mounting – 12 V or 24 V, working pressure max. 3600 psi, oil flow 15.9 GPM

KM 980-2 c solenoid valve KM 980-2 complete attachment kit including assembly components, hose guard, hoses and mounting on the KM 930 manipulator – 12 V or 24 V, working pressure max. 3600 psi, oil flow 15.9 GPM


Three hydraulic circuits neededOperating pressure: max. 2880 psiOil flow: 5.3 - 10.6 GPM

Technical Drawings

3-Axes-ManipulatorKM 931-1500

3-Axes-ManipulatorKM 931-500

Quick Hitch


SLA 12 mounted on a NOX Tilt Rotator to an excavator SLA 4 mounted on a trailer-mounted Loader Crane

SLABrush CutterThe Brush Cutter SLA cuts high grass, bushes, thicket, protruding or overhanging branches easily – or the usual mix of all together at embankments or uncultivated areas. It does not only cut, but also mulches by means of special knives – for excavators with 2 t/4400 lbs to 25 t/55000 lbs operating weight and for loader cranes in the railway sector. l Ideal for cutting brush and scrub, thicket and bushes.l Professional cutting and mulching by I/Y-formed movable

knive-bundles.l Strong and efficient.l Heavy construction for a long service life.

Brush Cutter

Type Width Weight Working max. Branch min. Oil Operatingwidth thickness flow weight

(in) (lbs) (in) (in) (GPM) (t/lbs)SLA 2 39.4 352 25.6 2.4 6.87 2 - 4 / 4400 - 8800SLA 4 43.3 462 31.5 3.2 9.51 3 - 5 / 6600 - 11000SLA 6 51.2 616 39.4 3.2 9.51 3 - 6 / 6600 - 13200SLA 12 63.0 1254 51.2 4.7 17.44 7 - 11 / 15400 - 24200SLA 14 74.8 1474 63.0 4.7 21.14 9 - 13 / 19800 - 28600SLA 20 82.7 1650 74.8 4.7 26.42 14 - 25 / 30800 - 55000


Two hydraulic circuits needed for SLA 2 / SLA 4 / SLA 6 – two hydraulic cycles and free drain line to tank for SLA 12 / SLA 14 and SLA 20 Operating Pressure: max. 3600 psiPump capacity: see table aboveDifferent couplings available

Pictures

Special knife-bundle made of three movable parts. The central knife cuts the raw pieces into fine mulch material

6 t2 t 8 t 10 t 12 t 14 t 16 t 18 t 20 t 22 t 24 t 25 t 28 t 30 t


ManipulatorKM 930

KM 930-500 KM 930-1000 KM 930-2000 KM 930-3000

A hydraulically operated attachment used for positioning tubes or poles, the KM 930 is for use on loader cranes with three functions. Flange mounting on the mechanical extension of the crane.

l Manoeuvrability through three hydraulic functions gripping, lifting and turning (rotation and tilting) of straight round poles (three hydraulic circuits are necessary). Unlimited angle of rotation.

l Heavy loads of 1100 lbs up to 6600 lbs can be handled by the KINSHOFER manipulators.

l Precision operation assured through continuous rotation, equipped with mechanically operating, hydraulic pilot controlled brake to prevent unintentional rotation.

Manipulator KM 930

Type Load capacity Gripping Ø Width B Number of Self weight Closing force(min./max.) tines

(lbs) (in) (in) (lbs) (lbf )KM 930-500 1100 3.9 / 11.8 30.9 1 517 2420KM 930-1000 2200 3.9 / 11.8 50.2 2 682 5060KM 930-2000 4400 9.8 / 23.6 53.7 4 1903 5500KM 930-3000 6600 9.8 / 23.6 64.2 6 2387 8580

Package consists of: manipulator, KINSHOFER rotator, hydraulic pilot controlled brake, non-return valve

Please note: tubes or poles have to be grabbed always in the centre of gravity

Accessories

Type Description

KM 980-2 solenoid valve for additional oil circuit to change over to 3 circuits (for gripping, lifting, turning) when only 2 circuits are available, ready for mounting – 12 V or 24 V, working pressure max. 3600 psi, oil flow 15.9 GPM (do-it-yourself assembly)

KM 980-2 c solenoid valve KM 980-2 complete attachment kit including assembly components, hose guard, hoses and mounting on the KM 930 manipulator – 12 V or 24 V, working pressure max. 3600 psi, oil flow 15.9 GPM


Operating pressure: max. 2880 psi Mind the pressure!Pump capacity: 5.3 - 10.6 GPM

Technical Drawings


35 t15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t … 25 t … 27 t …3 t1 t 6 t 8 t 10 t 12 t 16 t 18 t 20 t 22 t 24 t 26 t 27 t … 30 t

Fork Set GAF

Fork Set

Type max. Load Width Self weight Couplingscapacity

(lbs) (in) (lbs) (Type)GAF 6 4180 39.4 308 S30, S40GAF 8 4180 47.2 418 S45, S50GAF 12 5500 47.2 440 S45, S50GAF 18 8800 47.2 748 S45, S50, S60GAF 20 8800 47.2 924 B18, B20, B27, B70GAF 24 11000 47.2 968 B20, B27, B70, S80

Package consists of: mechanically adjustable fork, adapter for quick coupling system

Please note: put loads always the nearest to the back and to the centre of gravity


Quick coupling system nordic systems like S- or B-couplers (see table)

Picture

Lifting, moving and positioning of palletized or unpalletized materials is easy with the GAF Fork Set. Turn your excavator into a fork lift truck. Suitable for excavators from 3 t/6600 lbs to 27 t/59400 lbs operating weight.

l High lifting capacity. l Lightweight: S-type couplers ≤ 8% and B-types

couplers ≤ 11% of the total weight.l Highly economical: good value for money.l Adapted for being used with a tilt rotator:

best handling in this combination. l Mechanically adjustable forks.l Easy to connect by quick coupler adapter.l Wide range of quick coupling adapters:

S30 to S80 and/or B18 to B30.

GAF 18


AS Drive Units for AugersFor use on excavators, AS03 / AS05 / AS08 / AS10 auger drives are an econo-mical, robust solution for drilling holes for fence posts, poles, foundations and landscaping. Application specific wear parts and augers mean our auger packages are tailor-made to suit your needs.

l Profitable – With better speed and precision than alternative drilling methods, the AS03 / AS05 / AS08 / AS10 drive units and augers save you time, labour and filling materials.

l Adaptable – A range of drive units with different auger diameters and digging teeth means a AS03 / AS05 / AS08 / AS10 is available for all types of excavators, and suitable for a wide variety of applications.

l Durable – Designed and built to last, AS03 / AS05 / AS08 / AS10 series drive units can handle hundreds of consecutive cycles.

l Drive Units – steel housing can withstand high shock loading, output shaft and gear carrier are a robust, one-piece construction, components run in a maintenance free, constant oil bath, gears can easily be shifted from forward to reverse to quickly free the unit from being jammed.

Available for different excavator operating weights: 1t/2200 lbs - 3t/6600 lbs: AS03, 3t/6600 lbs - 5t/11000 lbs: AS05 , 5t/11000 lbs - 8t/17600 lbs: AS08, 5t/11000 lbs - 10t/22000 lbs: AS10 (AS03-AS08: torque 1440 to 4055 ft.lbs at 2880 psi, AS10: torque 5460 ft.lbs at 3456 psi).l Augers: teeth are set on a continuous spiral to provide maximum penetration and uniform performance.l Wear parts: l rubber locking system makes teeth easy to exchange. l using a hammer and punch, tooth exchange is done on-site. l two teeth options: Allround Teeth – BS-A: made of tempered material, bolt-on teeth are suitable for earth and clay. Strong Tungsten Teeth – BS-S: tungsten tipped, suitable for medium-rich soil, stony or frozen ground, heavy clay or asphalt.

Drive Units AS03 / AS05 / AS08 / AS10

Drive Unit AS03: Torque (at 20 MPa): 1440 ft.lbs

Operating pressure: 2880 psi

Pump capacity: 6.61 - 15.85 GPM

Output shaft: 2.24 in square

Self-weight: 99 lbs

Operating weight excavator: 1 - 3 t / 2200 - 6600 lbs

Upper connection (width x pin-Ø) 3.31 x 1.18 in





Self-weight: 143 lbs

















1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t


1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t

Augers BS-100 – BS-800 for Standard / Heavy DutyAugers for Drive Units AS03, AS05, AS08 and AS10

Typ

e

App

licat

ion

Dia

met

er o

f aug

er

Leng

th o

f aug

er(w

itho

ut e

xten

sion

)

Wea

rpar

tsTy

pe /

Qty

. of t

eeth

Self-

wei

ght

(in) (in) (lbs)

BS-150-57A standard duty 5.91 47.24 A / 2 62











BS-100-57S heavy duty 3.94 47.24 S / 0 51

BS-150-57S heavy duty 5.91 47.24 S / 2 62

BS-200-57S heavy duty 7.87 47.24 S / 2 68

BS-225-57S heavy duty 8.86 47.24 S / 2 79

BS-250-57S heavy duty 9.84 47.24 S / 2 86

BS-300-57S heavy duty 11.81 47.24 S / 4 101

BS-350-57S heavy duty 13.78 47.24 S / 4 110

BS-400-57S heavy duty 15.75 47.24 S / 6 115

BS-450-57S heavy duty 17.72 47.24 S / 6 119

BS-500-57S heavy duty 19.69 47.24 S / 8 159

BS-600-57S heavy duty 23.62 47.24 S / 8 178

BS-800-57S heavy duty 31.50 47.24 S / 9 264

Package consists of: auger , wearparts

AccessoriesType Description

KM 501 1t-8t upper suspension w/o pendulum damper between rotator and excavator KM 511 1t-8t upper suspension with pendulum damper between rotator and excavator BV-1000-57 extension for augers – length 39.37 in (55 lbs)BV-1500-57 extension for augers – length 59.06 in (75 lbs)SW01 cardanic adapter SW01 for Lehnhoff grab exchange system MS01 without suspension – up to 2t/4400 lbsSW03 cardanic adapter SW08 for Lehnhoff grab exchange system MS03 without suspension – up to 5t/11000 lbsSW08 cardanic adapter SW08 for Lehnhoff grab exchange system MS/HS08 without suspension – up to 12t/26400 lbs

Technical Drawings

Available spare parts

BS-A pilot

BS-A exterior tooth

BS-A interior tooth

BS-S exterior tooth

BS-S interior tooth

BS-S pilot

BS-250-57A

BS-350-57S

Heavy duty auger BS-S

Standard auger BS-A

1 Drive unit2 Auger3 Wear parts (teeth & pilots)4 Extension


BAD / HYK / BOR Augers and Drives The BOR Auger Series is an economical solution for drilling holes for fence posts, poles, foundations, etc. in earth, clay or sandy soils. As an extra, the HYD Hydraulic Motor can be used for winching or (with the HD drive) even for milling. The BAD is a coupler with a cardanic suspension for the hydraulic motor/auger – Heavy Duty version also available.

l For winching, drilling, milling.l Available for all sizes of excavator or loader crane.l Extra strong: torques 811 - 8850 ft.lbs at 3024 - 6480 psi.l Heavy Duty version available with even 25% more power.l Special quick hitch coupler/motor-combination (HYD)

for horizontal and vertical drilling available.

Complete drilling rig consits of Coupler BAD, Drive HYK and Auger BOR

BAD

HYK

BOR

Hydraulic Motor HYK / Hydraulic Motor HYD with horizontal & vertical Quick Hitch AdapterType Drive Capacity max. Operating Pump Working Torque Coupling

pressure capacity width at 2880 psi(in) (cu.ft) (psi) (c.y.) (in) (ft.lbs)

HYK 12 2.8 0.06 5040 0.02 - 0.21 23.6 59 S60HYK 20 2.8 0.06 5040 0.02 - 0.21 23.6 59 B20 / S70HYK 30 2.8 0.11 6480 0.05 - 0.46 23.6 59 S60HYK 35 3.9 0.11 6480 0.05 - 0.46 23.6 59 B20 / S70 / S80HYD 01 - 0.02 - 0.03 5040 0.02 - 0.18 23.6 59 S40 / S45 / S50HYD 02 - 0.02 - 0.03 5040 0.02 - 0.18 23.6 59 S60HYD 03 - 0.02 - 0.03 5040 0.02 - 0.18 23.6 59 B20 / S70HYD 04 - 0.06 5040 0.02 - 0.21 23.6 59 S45 / S50HYD 05 - 0.06 5040 0.02 - 0.21 23.6 59 S60HYD 06 - 0.06 5040 0.02 - 0.21 23.6 59 B20 / S70HYD 08 - 0.11 6480 0.05 - 0.46 23.6 59 S60HYD 09 - 0.11 6480 0.05 - 0.46 23.6 59 B20 / S70 / S80

AugersType Drive Diameter Length Weight

(in) (in) (in) (lbs)BOR 01 2.8 3.9 43.3 46BOR 02 2.8 5.9 43.3 57BOR 03 2.8 7.9 43.3 68BOR 04 2.8 9.8 43.3 79BOR 05 2.8 11.8 43.3 88BOR 06 2.8 13.8 43.3 97BOR 07 2.8 15.8 43.3 130BOR 08 2.8 17.7 43.3 150BOR 09 2.8 11.8 43.3 169BOR 10 2.8 13.8 43.3 189BOR 11 2.8 15.8 43.3 209BOR 12 2.8 17.7 43.3 231BOR 13 2.8 20.9 43.3 255BOR 14 2.8 24.8 78.7 308BOR 14 3.9 24.8 78.7 352BOR 15 2.8 27.6 78.7 330BOR 15 3.9 27.6 78.7 374BOR 16 2.8 20.9 78.7 363BOR 16 3.9 20.9 78.7 407BOR 17 2.8 24.8 78.7 396BOR 17 3.9 24.8 78.7 440BOR 18 2.8 20.9 78.7 429BOR 18 3.9 24.8 78.7 473BOR 19 2.8 20.9 78.7 495BOR 19 3.9 24.8 78.7 539BOR 20 3.9 20.9 78.7 638BOR 21 4.7 24.8 78.7 506BOR 22 4.7 20.9 78.7 572BOR 23 4.7 24.8 78.7 671BOR 24 4.7 20.9 78.7 836BOR 25 4.7 24.8 78.7 1001

AccessoriesType Description Length Drive Coupling Auger attachment

(in) (in)BAD 6 auger

adapter /grapple adapter

- - S30 / S40 linkBAD 14 - - S45 / S50 linkBAD 18 - - S60 linkBAD 24 - - B20 linkBAD 33 - - B27 / S70 link

BFO 03auger

extension

39.4 2.8 -BFO 04 78.7 2.8 -BFO 05 39.4 3.9 -BFO 06 78.7 3.9 -

Optional:Tapered Auger for drilling in slopes

39

JVVRoad-Rail WagonThe Road-Rail Wagon JVV is the perfect trailer for road-rail excavators. It can be used e.g. for ballast or for all the excavator attachments needed on site.

l Wheels for both systems, rail and road.l Height of rubber wheels hydraulically adjustable.l Brakes on rubber and rail wheels.l Telescopic draw bar with adjustable height.l Light weight, but robust construction.l Fit for driving on regular streets.l Anchoring loops.

Road-Rail Wagon

Type Total Load Width Wagon height Flap height Weight Rail wheel Gauge Operatinglength length over rail Ø width weight

(in) (in) (in) (in) (in) (lbs) (in) (in) (t)JVV 224 197 98 24 36 132 17.7 or 21.7 56.4 depending on

country

Requirements of ExcavatorCoupling System: standard trailer draw bar

Pictures

We reserve the right to amend specifications without prior notice! KINSHOFER GmbH, D-83666 Waakirchen, Germany

40

EXA

-KIN

-TRA

-NA

-071

2

Up front, everywhere

Hauptsitz Deutschland: Kinshofer GmbHHauptstrasse 7683666 WaakirchenTel.: +49 (0)8021 – 88 99 0Fax: +49 (0)8021 – 88 99 37Email: [email protected]

North America: Kinshofer North America5040 Mainway Drive, Unit #11Burlington, ON L7L 7G5Tel.: +1 (905) 335 2856Fax: +1 (905) 335 4529Toll Free (North America): 1 (800) 268 9525Email: [email protected]

KINSHOFER is an ISO 9001 certified Company. DVS ZERT is a registred trademark of DVS ZERT® e.V., Düsseldorf.

railway - telford55.comtelford55.com/wp-content/uploads/railway-catalog.pdf · construction –...

Documents