UNMANNED ANTI AIRCRAFT MISSILE WITH RADAR USING RFID

Student ProfileG.Venkat Sathes Reddy (07141A0470) B.Ashwini (08145A0401) Punna Eshwar (07141A0487)

Under the Esteemed Guidance of Mr.R.Anil Kumar B.Tech

Assistant Professor

CONTENTS

ABSRACT BLOCK DIAGRAM DETAILS OF BLOCKS CONNECTIONS WORKING OF PROJECT SOFTWARE CONCLUSION REFERENCE

ABSTRACT

Detecting angle of Obstacles. Detecting anti aircrafts by using

RFID tags. And also Blasts that anti aircraft

with gun. Here in place of gun we show

LED and Buzzer

Block diagram of Receiver Section

Motor DriverBuffe

r

Firing indicat

or

StepperMotor

MOTOR DRIVER

GUN MOTOR

PC

1

OPTICAL SENSOR

RS232

RF Rx

MicroController

BLOCK DIAGRAM

Block diagram of Flight Section

RF transmitter

RFCODE

GENERATOR (MC)

Battery

DETAILS OF BLOCKS

IR Transmitter IR transmitter is an

optical transducer which converts electrical signals into IR rays.

Optical Transducer IR Receiver

IR receiver is an optical transducer which converts IR rays into electrical signals.

Stepper Motor

Stepper Motor Driver Circuit

IRF540 Mosfets are used to drive the stepper motors.

Stepper Motor

Unipolar (Half step sequence) stepper motor are used for rotating antenna .

Slot sensor

It consists of IR light emitting diode(LED1) and phototransistors(Q1). It is used to detect the position of the target.

Firing indicator

A Red LED is used along with a buzzer. Whenever a fire command given, LED

blink once and buzzer beeps.

PC Block The scanning process can be seen in PC RS232 cable is used for the communication

between PC and the Micro Controller.

RS 232 The communication between

microcontroller and personal computer DB 9 female

Micro Controller Unit

A micro controller is used to supervise all these functions.

Battery power supply

A +12v, 7Ah Ni – cad, maintenance free battery is used to power the vehicle.

Power supply

RF IDENTIFICATIONTransmitter Section 2051 MICROCONTROLLER CODE GENERATOR

RF Transmitter

Battery power supplyRF MODULES

Receiver section

RF Receiver

Slave Microcontroller

Slave Microcontroller to Master Microcontroller

Connection to Microcontroller

Command Hardware indicate Pc indicate

IR feed backIs zero

Led isn’t glow No indication on screen

IR feed backIs one

Led is glow Obstacle is detected

RADAR MOTOR CONTROL P2.0 TO P2.3 ( 21-24)ANTENNA HOME SENSOR P1.4 (5)GUN MOTOR CONTROL P2.4 TO P2.7 (25-28)GUN HOME SENSOR P1.5 (6)I.R.FEED BACK P1.1 (2)CODE MATCH INPUT P3.7 (17)

SOFTWARE

A Micro Controller is used to supervise the above functions according to the program stored in it.

This program is made in assembly language.

At the receiving end, for the computer, the program is written in ‘C’ language to receive the serial data from the Micro Controller and to display the object information on the monitor.

WORKING OF PROJECT if the anti aircraft detects PC will indicate with RED signal. if the our aircraft detects PC will indicate with GREEN

signal.

0

90

180

270

Conclusion

This project is developed in order to help the Border security system to avoid the human losses by controlling with the wireless communication.

To face new challenges in the present day situation in Military applications unmanned systems are more accurate, flexible and reliable.

Demo purpose, we are using optical sensors instead of microwave in the radar antenna.

REFERENCE[1] Introduction to Radar Systems – Merrill I. Skolnik, SECOND

EDITION, McGraw-Hill, 1981.[2] Introduction to Radar Systems – Merrill I. Skolnik, THIRD EDITION, Tata McGraw-Hill, 2001.[4] The 8051 Microcontroller and Embedded Systems – Mazidi and Mazidi, PHI, 2000.[5] Micro Controllers – Deshmukh, Tata McGraw Hill Edition.

Web Reference: [1] http://courses.ece.ubc.ca/[2] www.electronicsforyou.com[3] www.sodoityourself.com[4] http://en.wikipedia.org/wiki/Rs232 [5] www.Wikipedia.com[6] www.electronicsforyou.com[7] www.google.co.in/searches[8] www.electronicstutorials.com etc

THANK YOU

Quires………?