rack armour (australia) armour 2012.pdf · rack armour incorporates a patented design that...

Download RACK ARMOUR (Australia) Armour 2012.pdf · Rack Armour incorporates a patented design that provides…

Post on 18-Aug-2018

212 views

Category:

Documents

0 download

Embed Size (px)

TRANSCRIPT

  • S I M P L E S U P E R I O R S O L U T I O N

    Rack Armour is the simple, superior solutionto rack damage caused by forklifts and other warehouse operations.

    Rack Armour can save you the time, money and trouble associated with racking repairs, replacement and maintenance.

    RACK ARMOUR (Australia)

    SIMPLE SUPERIOR SOLUTION

    Rack Armour Warehouse Buffer

    Minimises Damage to Vehicles and Structures Available in Small 100mm or Large 150mm sizes Sold in lengths of 10m, smaller lengths subject to availability Manufactured from Heavy Duty PVC White in colour, other colours available subject to minimum

    quantities Can be mounted directly to structures for Easy Installation Buffer Dimensions:

    5060

    60

    100150

    100

    All dimensions approximate and in mm

    SIMPLE SUPERIOR SOLUTION

    Rack Armour Warehouse Buffer

    Minimises Damage to Vehicles and Structures Available in Small 100mm or Large 150mm sizes Sold in lengths of 10m, smaller lengths subject to availability Manufactured from Heavy Duty PVC White in colour, other colours available subject to minimum

    quantities Can be mounted directly to structures for Easy Installation Buffer Dimensions:

    5060

    60

    100150

    100

    All dimensions approximate and in mm

    Rack Armour has been installed into some of Australias largest organisations. Our growing client base includes: Inghams Enterprises Pty. Limited, Coles Myer, Coca Cola Amatil, Toll Priority and Sanitarium Health & Wellbeing.

    In Australia, Rack Armour continues to impress. Shawn Munday, Goods Inwards/Distribution Centre Manager of Sanitarium Health & Wellbeing told us why he chose Rack Armour: Rack Armour has proven to maintain protection to our racking, in turn, reducing maintenance costs.

    And more;

    Michael Montuori, Safety Risk Compliance Manager NSW & ACT told us Rack Armour was Cost effective, low maintenance and easy to install.

    Dont Take Our Word For It

    S I M P L E S U P E R I O R S O L U T I O N

    Independant Expert Testing- FEM 10.2.02

    Independant testing by Cardno

    FEM 10.2.02 - highest international standard used (on which AS4084 is based)

    Rack Armour met and exceeded required loads for FRONT and SIDE impacts

    Superior protection for peace of mind

    Comprehensive and independant assesment

    Features And Benefits

    Contact Us

    Phone: 02 9722 0502

    Fax: 02 9728 6665

    Email: info@rackarmour.com.au

    Web: www.rackarmour.com.au

    The patented design and unique use of materials means that Rack Armour can provide you with benefits not gained from traditional protection devices.

    Ergonomic design and close fit ensures minimal intrusion into pallet space

    State of the art materials effective down to - 40 degrees - cold store safe

    No fixing or bolts to be ripped off or to damage floors or racking

    Designed to have persistence of shape to ensure ongoing protection

    High visibility yellow as standard with any colour available ( subject to min)

    Fully transferable if you have a re-fit or move premises

    Three sizes to ensure Rack Armour will fit most types of racking

    Installs in seconds, simply clips onto your existing racking

    Impervious to acid, alkali, mould, rust and most solvents

    Fully tested for front and side impacts

  • Rack Armour incorporates a patented design that provides ongoing protection and outperforms conventional pallet racking protection.

    Its tough outer, or shock deflector, is made from an extremely tough polymer which can withstand significant impact and has persistence of shape to give ongoing protection as the unit reverts back to its original form.

    The compact design is unique in that the curved edges deflect the impact away from the rack face.

    The foam inner, or shock diffuser, acts to reduce inertia from any impact and diffuse the force along the whole length of the unit (600mm) rather than being concentrated at the point of impact. Any residual impact is therefore dissipated over a much larger area making it less likely to cause damage to your upright.

    The Product - Rack Armour

    Minimises damage to the rear upright of your pallet racking

    Diffuses and deflects impact

    Available in 120mm or 260mm high

    Manufactured from high density polyethylene in high visibility yellow

    Easy to install and remove for safety inspections

    Will not rust

    Suitable to -40C

    Resistant to growth of mould and bacteria

    Rear Upright Protector

    Bottom Level

    SIMPLE SUPERIOR SOLUTION

    Rack Armour Upright Posts

    Minimises damage to vehicles when impacted Prevents Damage to Racking, Stock and Employees Available for surface mount or in-ground installation Bolt on design easy to install and ideal for permanent or

    temporary applications Manufactured from High Density Polyethylene in either

    Black or High Visibility Safety Yellow Range Available:

    Size Mount Height Mounting Holes Bolt SizeIn Ground 1500mm N/A N/A 90mm Above Ground 1000mm 4 x 14mm M12 In Ground 1600mm N/A N/A Removable Sleeve 1600mm N/A N/A 144mm Above Ground 1200mm 4 x 18mm M16

    Posts

    Minimises damage to vehicles when impacted

    Prevents damage to racking, stock and employees

    Available for surface mount or in-ground installation

    Bolt on design easy to install and ideal for permanent or temporary applications.

    Manufactured from high density polyethylene in either black or high visibility safety yellow

    Warehouse Buffer Minimises damage to vehicles and structures

    Available in Small 100mm or Large 150mm sizes

    Sold in lengths of 10m, smaller lengths subject to availabilty

    Manufactured from heavy duty PVC

    White in colour, other colours available subject to minimum quantities

    Can be mounted directly to structures for easy installation

    SIMPLE SUPERIOR SOLUTION

    Rack Armour Warehouse Buffer

    Minimises Damage to Vehicles and Structures Available in Small 100mm or Large 150mm sizes Sold in lengths of 10m, smaller lengths subject to availability Manufactured from Heavy Duty PVC White in colour, other colours available subject to minimum

    quantities Can be mounted directly to structures for Easy Installation Buffer Dimensions:

    5060

    60

    100150

    100

    All dimensions approximate and in mm

    SIMPLE SUPERIOR SOLUTION

    Rack Armour Warehouse Buffer

    Minimises Damage to Vehicles and Structures Available in Small 100mm or Large 150mm sizes Sold in lengths of 10m, smaller lengths subject to availability Manufactured from Heavy Duty PVC White in colour, other colours available subject to minimum

    quantities Can be mounted directly to structures for Easy Installation Buffer Dimensions:

    5060

    60

    100150

    100

    All dimensions approximate and in mm

    S I M P L E S U P E R I O R S O L U T I O N S I M P L E S U P E R I O R S O L U T I O N

    SIMPLE SUPERIOR SOLUTION

    Rack Armour Upright Posts

    Minimises damage to vehicles when impacted Prevents Damage to Racking, Stock and Employees Available for surface mount or in-ground installation Bolt on design easy to install and ideal for permanent or

    temporary applications Manufactured from High Density Polyethylene in either

    Black or High Visibility Safety Yellow Range Available:

    Size Mount Height Mounting Holes Bolt SizeIn Ground 1500mm N/A N/A 90mm Above Ground 1000mm 4 x 14mm M12 In Ground 1600mm N/A N/A Removable Sleeve 1600mm N/A N/A 144mm Above Ground 1200mm 4 x 18mm M16

    SIMPLE SUPERIOR SOLUTION

    Rack Armour Upright Posts

    Minimises damage to vehicles when impacted Prevents Damage to Racking, Stock and Employees Available for surface mount or in-ground installation Bolt on design easy to install and ideal for permanent or

    temporary applications Manufactured from High Density Polyethylene in either

    Black or High Visibility Safety Yellow Range Available:

    Size Mount Height Mounting Holes Bolt SizeIn Ground 1500mm N/A N/A 90mm Above Ground 1000mm 4 x 14mm M12 In Ground 1600mm N/A N/A Removable Sleeve 1600mm N/A N/A 144mm Above Ground 1200mm 4 x 18mm M16

    The Tough Outer, or Shock Deflector is curved to deflect much of the impact away from the rack face.

    The Foam Inner, or Shock Diffuser, acts to diffuse the force along the whole length of the unit rather than being concentrated at the point of impact.

    The Rack Armour Design