Reevoo

lv

DAEJIN DSP

vinDAEJIN DSP ng DD

ooor

DAEJIN DSP Co.,Ltd.

C

ARD – A Product & Main Function

Safety Device1st Safety Measure2nd Safety Measure3rd Safety Measure

02

0405053rd Safety Measure

Additional Function

Products Standard

ARD – B Product & Main Function

Safety Device

050608

10

Safety Device1st Safety Measure2nd Safety Measure3rd Safety Measure

Additional Function

Products Standard

1112121314

ARD – C Product & Main Function

Safety Device1st Safety Measure2nd Safety Measure3rd Safety Measure

16

1718183rd Safety Measure

Additional Function

Products Standard

Supplement - Electric PlanMaintenance

1920

2123Maintenance

Functional OverviewAssembly InstructionGeneral SpecificationProject Reference

2324252930

Revolving Door

The Representative Highest-QualityGrand Type Auto Revolving Door (ARD-A-CROSS)

p g Q y

1 DAEJIN DSP

ARD-A

The Representative Highest-Quality Revolving DoorARD-A, the representative highest-quality revolving door, whose value is highlighted at high-qualitydepartment stores and hotels. Wide space and full automatic system provide convenience andelevate the dignity of the building.

Product & Main Function

■CROSSWith the ARD-A-CROSS, DSP offer a traditional revolving door design, which can be configured to best suit the access requirements of most entrances. Three and four wing versions are available

ith l t ti ti ff i fl ibilit t b th j t b d t d dwith manual or automatic operation, offering flexibility to both project budget and access needs.

■OVALThis unique door design boasts probably the most robust and serviceable unit available in the market place, combining transparency and style without compromise.

■SHOWWhere high pedestrian traffic flow is required, the larger drum diameters available with the ARD-A-Where high pedestrian traffic flow is required, the larger drum diameters available with the ARD ASHOW range of revolving doors provide a client with the knowledge that employees and visitors can move freely through these doors at all times. The addition of a central showcase allows the client to locate display material in a prominent location and promote their business or simply provide a welcoming feature within the door to greet their visitors.

■ Full Automatic Revolving System■ Full Automatic Revolving SystemThis door revolves according to your walking speed. You can select the one you want amongthree options. (Speed Controllable)

MODE ONEThe door stops at a specific position, revolves according to the person’s walking speed (4 RPM),and then, stops at the position, (Stop – Revolving (4 RPM) - Stop, when there are only a fewpersons)

MODE TWOThe door revolves at a low speed (1 RPM), changes its revolving speed according tothe person’s walking speed, and then, slowly revolves again.(Low speed-Revolving according to a walking speed – Low Speed)

MODE THREEMODE THREEThe door continuously revolves according to the person’s walking speed. (When there are lotsof persons)

21 Revolving Door

The Safest Revolving DoorGrand Type Auto Revolving Door (ARD-A-SHOW)

The Safest Revolving Door

3 DAEJIN DSP

ARD-A

Safety Device

■ 1st Safety MeasureJamming-Prevention device

If a person tries to enter the door when the distance between the revolvingd d th ill i b l 40 th f t d t t hi /h ddoor and the pillar is below 40cm, the safety sensor detects him/her andstops the revolving door. In this way, this safety device protects any personentering the door in a hurry.

Collision-Prevention device

If the revolving door is within safety distance(30cm) from the back of a person, it automaticallyreduces its speed. This function prevents a slowlywalking person from being run over by the door.

4Revolving Door

Safety Device

■ 2nd Safety Measure

Vertical Safety BumperIf a person or a material is caught between the revolving door and the pillar, the door stopsimmediately. In this way, this function prevents a person or a material from being caught betweenthe door and the pillar.

Door Safety SensorA safety bumper is installed at the bottom of the revolving door.It absorbs any impacts if a person is run over by the doorand stops the revolving door. This function prevents a personfrom falling down when he/she is run over by the revolvingfrom falling down when he/she is run over by the revolvingdoor.

■ 3rd Safety Measure

Automatic StopIf the revolving door is run over by something and comes to be folded, the revolving door stopsautomatically. When the door is returned to normal condition, the door revolves again. Thisfunction prevents people from stumbling over the door.

Emergency Stop Button

Emergency stop buttons are placed on both pillars. Push of thesebuttons stops immediately the revolving door. These can be used tostop the revolving door in an emergency situation.

5 DAEJIN DSP

ARD-A

Additional FunctionDoor Folding Function (for escape in emergency)Doors are easily folded, enabling escape in emergency or easymovement of any large material, employing a special gear, doorscan be folded at 45, 90 or 135. In such folded condition, doors arenot shaken (Strength in folding condition can be adjusted )not shaken. (Strength in folding condition can be adjusted.)

Function for the HandicappedA special button for the handicapped or senior persons is providedA special button for the handicapped or senior persons is provided.So, the door revolves at a low speed when the button is pushed.

ShowcaseShowcaseA showcase is provided at the center, which revolves along withthe revolving door. This showcase can be used for display purpose.

I t i Li htiInterior LightingTotal 12 lighting devices, including wing lights at the top of thedoor and those at the ceiling of the showcase, revolve along withthe door, illuminating the entrance gate at a specific brightness.

Night DoorA night door for closing the revolving door is provided. If plays therole of crime – prevention door at night.

6Revolving Door

Premium Revolving DoorGrand Type Auto Revolving Door (ARD-A TYPE)

g

Grand Type Auto Revolving Door (ARD-A OVAL)

7 DAEJIN DSP

ARD-A

Products Standard

ARD-A

DSP CROSS DSP SHOWDSP OVAL

300

DSP CROSS DSP SHOWDSP OVAL

300 300 400 400

3wing

8Revolving Door

Premium Revolving DoorMultiple Auto Revolving Door (ARD-B-SLIDE)

g

9 DAEJIN DSP

Revolving Door & Sliding Door in One

ARD-B

ARD-B is the next generation revolving door. ARD-B with 2 wings provides the widest passage space and easy selection of revolving door or slidingdoor.

Product & Main Function

■GRANDSimplicity, elegance and functionality are the hallmarks of the ARD-B-GRAND range of revolving doors. Utilising as much glass as possible, Specifiers can be confident in the range of features and standard dimensions available when sourcing this productstandard dimensions available when sourcing this product.

■SLIDE & PATHMany building owners specify the 2 wing ARD-B-SLIDE or PATH type as a valuable solution for their entrance needs. Where a high capacity and functionality are essential for the smooth operation of the entrance, the larger segments and ease of movement of this door is a practical solution for tidal pedestrian flow. Main features of this door are two-wing revolving with showcase segments and the addition of sliding door and/or balanced door option in central frame. The exceptional balanced door option allows transit for large loads or displays when required.

■ Full Automatic Revolving SystemThis door revolves according to your walking speed. You can select the one you want amongthree options. (Speed Controllable)

MODE ONEThe door stops at a specific position, revolves according to the person’s walking speed (4 RPM),and then, stops at the position, (Stop – Revolving (4 RPM) - Stop, when there are only a fewpersons)

MODE TWOThe door revolves at a low speed (1 RPM), changes its revolving speed according to theperson’s walking speed, and then, slowly revolves again.(Low speed-Revolving according to a walking speed – Low Speed)

MODE THREEThe door continuously revolves according to the person’s walking speed. (When there are lotsof persons)

10Revolving Door

Safety Device

■ 1st Safety MeasureJamming-Prevention device

If a person tries to enter the door when the distance between the revolving door and the pillarIf a person tries to enter the door when the distance between the revolving door and the pillar is below 40cm, the safety sensor detects him/her and stops the revolving door. In this way, this safety device protects any person entering the door in a hurry.

Collision-Prevention device

If the revolving door is within safety distance (30cm) from the back ofa person, it automatically reduces its speed. This function preventsa slowly walking person from being run over by the door.

11 DAEJIN DSP

ARD-B

■ 2 d S f t M

Safety Device

■ 2nd Safety Measure

Vertical Safety BumperIf a person or a material is caught between the revolving door and thepillar, the door stops immediately. In this way, this function prevents aperson or a material from being caught between the door and the pillar.

Door Safety SensorA safety bumper is installed at the bottom of the revolving door. Itabsorbs any impacts if a person is run over by the door and stops therevolving door. This function prevents a person from falling down whenhe/she is run over by the revolving door.

■ 3rd Safety Measure

Emergency Stop Button

Emergency stop buttons are placed on both pillars. Push of thesebuttons stops immediately the revolving door. These can be used tostop the revolving door in an emergency situation.

12Revolving Door

Addi i l F iAdditional Function

Door Folding Function (for escape in emergency)Doors are easily folded, enabling escape in emergency or easymovement of any large material employing a special gear doorsmovement of any large material, employing a special gear, doorscan be folded at 45, 90 or 135. In such folded condition, doors arenot shaken. (Strength in folding condition can be adjusted.)

Function for the HandicappedA special button for the handicapped or senior persons is provided.So, the door revolves at a low speed when the button is pushed.

Interior LightingTotal 12 lighting devices, including wing lights at the top of thedoor and those at the ceiling of the showcase, revolve along withthe door, illuminating the entrance gate at a specific brightness.

Night DoorA night door for closing the revolving door is provided. If plays therole of crime prevention door at nightrole of crime – prevention door at night.

13 DAEJIN DSP

ARD-B

ARD-B

Products Standard

400 400 400 300

DSP GRAND DSP SLIDE DSP PATH

14Revolving Door

Premium Revolving DoorCOLUMN Auto Revolving Door (ARD-C-COLUMN)

Premium Revolving Door

15 DAEJIN DSP

Innovation of Revolving Door

ARD-C

ARD – C, the Column type revolving door. Innovative Column type enables straight movement, allowing lots of people to conveniently passthrough the revolving door.

Product & Main Function

■ COLUMNARD-C-COLUMN with wide space provides high passage capacity of up to 3840 persons in an hour.p p g p g p y p pThis column type revolving door currently used in local department stores enables your comfortablepassage. Further, you can go through this revolving door along with a shopping cart or a wheelchair.

■ Full Automatic Revolving SystemThis door revolves according to your walking speed. You can select the one you want among threeoptions. (Speed Controllable)opt o s. (Speed Co t o ab e)

MODE ONEThe door stops at a specific position, revolves according to the person’s walking speed (4 RPM)and then, stops at the position, (Stop – Revolving (4 RPM) - Stop, when there are only a fewpersons)

MODE TWOMODE TWOThe door revolves at a low speed (1 RPM), changes its revolving speed according to the person’swalking speed, and then, slowly revolves again. (Low speed-Revolving according to a walking speed – Low Speed)

MODE THREEThe door continuously revolves according to the person’s walking speed. (When there are lots ofpersons)p )

16Revolving Door

S f D iSafety Device

■ 1st Safety Measure

Jamming-Prevention deviceIf a person tries to enter the door when the distance between the revolving door and the pillarIf a person tries to enter the door when the distance between the revolving door and the pillaris below 40cm, the safety sensor detects him/her and stops the revolving door. In this way, thissafety device protects any person entering the door in a hurry.

Collision-Prevention deviceIf the revolving door is within safety distance (30cm) from the back of a person, itautomatically reduces its speed. This function prevents a slowly walking person from beingrun over by the door.

17 DAEJIN DSP

f i

ARD-C

Safety Device

■ 2nd Safety Measure

Vertical Safety BumperIf a person or a material is caught between the revolving doorand the pillar, the door stops immediately. In this way, thisfunction prevents a person or a material from being caughtbetween the door and the pillar.

Door Safety SensorA safety bumper is installed at the bottom of the revolving door.It absorbs any impacts if a person is run over by the door andstops the revolving door. This function prevents a person fromfalling down when he/she is run over by the revolving door.falling down when he/she is run over by the revolving door.

■ 3rd Safety Measure

Emergency Stop ButtonEmergency stop buttons are placed on both pillars. Push of thesebuttons stops immediately the revolving door. These can be used tostop the revolving door in an emergency situation.

Automatic StopIf the revolving door is run over by something and comes to be folded, the revolving door stopsautomatically. When the door is returned to normal condition, the door revolves again. Thisfunction prevents people from stumbling over the door.

18Revolving Door

Addi i l F iAdditional Function

Door Folding Function (for escape in emergency)

Doors are easily folded, enabling escape in emergency or easy

movement of any large material, employing a special gear,

doors can be folded at 45, 90 or 135. In such folded condition,

doors are not shaken. (Strength in folding condition can be

adjusted.)

Function for the Handicapped

A special button for the handicapped or senior persons is

provided. So, the door revolves at a low speed when the

button is pushed.

Interior LightingTotal 12 lighting devices, including wing lights at the top of the door andthose at the ceiling of the showcase, revolve along with the door, illuminatingthe entrance gate at a specific brightness.

19 DAEJIN DSP

ARD-C

P d S d dProducts Standard

ARD-C

DSP COLUMN

20Revolving Door

Electric Plan

Supplement

■ Electric Diagram

21 DAEJIN DSP

Supplement

Electric Plan

■ P.L.C. Connection Chart

22Revolving Door

Supplement

Maintenace

1. For Safety Use1) Please check if the passenger path is clear before running. 2) Check if the door stops at right position when power has turned off3) In case of block-out, please turn the switch off in order to avoid sudden start of

revolving door when the power is backrevolving door when the power is back.

2. InstructionIn case the door stop running

1) Please check if power switch is off2) Please check if emergency switch is on. 3) Please check Please check if the passenger path is clear

3. Cautions 1) In case of a strong wind, please stop operating revolving door. 2) Do not run into the revolving door. 3) Do not ride on or hold door leaves. 4) Do not put your foot under the revolving door. 5) Do not stop and stand inside of the revolving door when its’ running5) Do not stop and stand inside of the revolving door when its running.6) Do not touch or push the door.

4. Maintenance1) A major maintenance check is required once a year2) Switch off the power during any maintenance work3) Keep water away from the control box4) To clean the doors,

Use a sponge to wipe the stainless steelUse a dry cloth to dry itApply a stainless steel polish & cleaner onto the surface of the stainless steel and thoroughly wipe it until remove the polish on the surface

23 DAEJIN DSP

Supplement

Functional Overview

Motion SensorThe sensor senses any people walking in and activates the door

Emergency Stop ButtonEmergency stop buttons are placed on both pillars. Push of these buttons stopsimmediately the revolving door. These can be used to stop the revolving door inan emergency situation.

Button for the disabledA special button for the disabled or senior persons is provided. So, the doorrevolves at a low speed when the button is pushed.

Emergency Break-out systemIn case of emergency, the door can be folded allowing an opening passageway. If the door is runover or pushed backward by certain force and comes to be folded, the revolving door will stopp y , g pautomatically. When the door is returned to normal position, the door revolves again.

Collision-Prevention sensor(horizontal)A safety bumper is installed at the bottom of the revolving door. If a person isrun over by the door or if there is any obstacle between the lower part of thedoor wing and the floor, it automatically stops the door.

Collision-Prevention sensor(vertical)A safety bumper is installed at the vertical frame of the door wing. If a person isrun over by the door or touches the vertical frame of the door, it automaticallystops the door.

Vertical Safety BumperVertical Safety BumperIf a person or a material is caught between the revolving door and the pillar,the door stops immediately.

24Revolving Door

Assembly Instruction

Supplement

■ Essential Tools for Assembly of Revolving Door

1. One Cable Lift (Life Maximum Height: 2.5M, Maximum Bearing Weight: 0.8Ton) In case of not able to get cable lift, you can make a simple supporting structure that can put Chain Block and use it to move up the Drum.

DC Invertor WeldingCable Lift Hammer Drill LadderChain Block DC Invertor Welding Machine

Cable Lift Hammer Drill LadderChain Block

■ Revolving Door Parts

Control Box

Bracket (Lower)- Connect Door withCenter Axis

25 DAEJIN DSP

Bracket (Upper)- Connect Door withCenter Axis Bearing Cover

Supplement

■ Revolving Door Assembly Outline

A Lifti DA. Lifting Drum B. Connecting Wall with Drum and fixing it to the ground. C. Installing Lower Bearing to the round: Should be installed 15mm higher than the floor level. ---------------(After Finishing Floor such as installing Stones or Marbles, please proceed the

followed assembly instruction) --------------D. Installing Bearing Cover E. Installing Center Axis F. Connecting Motor Mount and Motor gG. Installing Curved Glass ------------------------(Using silicon to fix Glass)-----------------------H. Installing Bracket: Upper and Lower Bracket – Each of 3 PiecesI. Installing Door Leaves and key. J. Installing Door Leaves glass-------------------------( Using silicon to fix Glass)----------------------K. Electronic Operational Work and Trial Operation

■ Detailed Instruction of Assembly

A. Lifting Drum a. First thing you have to do is using Cable Lift to lifting drum and connect it with two walls

by fixing 6 bolts (Please refer to Picture A)by fixing 6 bolts. (Please refer to Picture A)b. If you can not find Cable Lift, please make a support to connect chain block that can lift

drum and hole. (Please refer to Picture B)

Picture A: In Case of using Cable Lift

Picture B: Cannot be used of Cable Lift, please make a support as , p ppthe above picture and use chain black to lift drum.

B. Assembling Drum to Wall and fixing it to the floor slaba. As the picture below, using Cable Lift or Chain Block to lift drum and connect drum with walls by fixing bolts to six holes.

26Revolving Door

b. Installing Anchor Bolts where you put Walls. Each wallh h i l f h ld i ll

Supplement

has three vertical frames, so you should install two orthree anchors bolts using hammer drill.

c. You should put temporary support, such as bricks andthin steel sheets, between buttom and floor line, in orderto hold walls and drum. This process is the most importantfor installing revolving door because you should makewalls flat. Using a level, please check whether level is okay.If walls are flat please use flatIf walls are flat, please use flat bars or rod bar to weld between anchor bolt and Verticalframes. Walls must be buried 20mm below the floor Line.

*Picture A: Connecting Drum with Wall

Picture b & C: Using flat bars or rod bars to connectanchor bolts and vertical frames of the walls and dowelding. Walls must be buried below 20mm of floor line.

C. Installing Lower Bearing a. Installing four or five Anchor Bolts where you bury Lower Bearing. b. Using flat bar or Rod bar to weld Lower Bearing and Anchor bolts. You must level out Lower

Bearing using a level. Making correct level is the most important job. c. Lower Bearing must be installed 15mm higher than Floor Line and Precious level out is the most

important, so using a level, please make correct level.

27 DAEJIN DSP

D. Installing Bearing cover

Supplement

. sta g ea g co ea. Before connecting Center Axis to Bearing, please install Bearing Cover. b. Bearing Cover has fours holes for fixing it to the ground. Thus, please make marking using

those holes first. Using 6mm hammer drill to make four holes and using anchor to fix bearingcover.

E. Installing Center Axis Fi i i h f C A i h h l f da. First, inserting the upper part of Center Axis to the center hole of drum

b. Inserting the lower part of Center Axis to Lower Bearingc. Fixing upper and lower part using bolts : Upper Part- 12mm X 20(3EA) / Lower Part- 12mm X

15(3EA)

F. Connecting Motor Mount and Motor a Making Center Axis vertically straight inserting it to motor mount and weld and fix it witha. Making Center Axis vertically straight, inserting it to motor mount, and weld and fix it with

bolts.

G. Installing Curve Glass

H. Installing Bracketsa. Installing brackets to connect Center Axis with Door Leaves. b. Upper bracket and lower bracket are different, so when you install, please install them in the

right position.

I. Installing Door leavesa. Pushing door leaves where brackets are installed. Please be caution to damage any electronic

lineslines. c. After pushing door leaves and connecting with upper and lower parts of brackets, please use

6mmX20 bolts to fix door leaves. Each door leaf need two bolts to fix.

J. Installing Door Leaves glass

K. Electronic Work and Trial operation.pa. Skilled electrician use electrical wiring diagram

circuit diagram provided to connect electricity anddo trail operation. More Detailed, please refer tothe manual of Electronic Plan Document.

28Revolving Door

General Specification of DSP Revolving Door

Supplement

Name of Product DSP Revolving Door ( ARD-A, ARD-B, ARD-C )

Size (mm) ▪ Diameter 2,000 ~ 5,200mm▪ Height 2,400 ~3,000mmg

Motor

GM-SHYF-RH MITSUBISHI (200~735W) (JAPAN)

The motor’s watt becomes higher in proportion to the size of diameterof revolving door.▪ Less than 3M (200W)▪ From 3M up to 3.6M (400W)▪ More than 3.6M (735W)More than 3.6M (735W)

Inverter FR-S520E – 0.75K MITSUBISHI (0.5~1HP) (JAPAN)

P.L.C.(programmable logic controller)

MASTER – K80S LS (KOREA)

Power 220/380 Volt 6A 60HZ or 10A 60HZ AC

Speed of Revolution 4~8 RPM, (Handicap mode- 2~3 RPM)

Entrance Main Sensor (AIR 20)Sensor

▪ Entrance Main Sensor (AIR 20)▪ Safety sensors (PIR-20)▪ Post Safety Bumper Sensor (ENT20) Bircher(SWITZERLAND)

Other Parts Emergency Stop Button, Main Switch

Warranty The products has free warranty as the producer’s standard within12(twelve months) in normal using condition

28Revolving Door29 DAEJIN DSP

PIR20 – Passive Infrared Motion Detector

PIR20 – Active Infrared Detector

Certification

Supplement

Project Reference

GRAND PLAZA HANOI, VIETNAM

MONIS BUILDING, MONGOLIA

30 DAEJIN DSP

SOUTH KOREAN’S ENTERANCE OFFICE , NORTH KOREA

Supplement

GUM-KANG MOUNTAIN HOTEL, NORTH KOREANORTH KOREA

WOOLIM e-BIZ CENTER, KOREA

31Revolving Door

GYEONGJU HILTON HOTEL, KOREA

Supplement

EGHTESAD NOVIN BANK, IRAN

JAMSIL LOTTE CASTEL, KOREA

HUNDAI SUPPER VILLE, KOREA

32 DAEJIN DSP

Supplement

YONG IN CITY HALL, KOREA

SEOUL K.C.C.I., KOREA

33Revolving Door

CHEON AN SHINSEGAE DIPARTMENT STORE, KOREA

DAEJIN DSP Co.,Ltd.

dsp USA Inc.1952 Gallows Road, Suite 110, Vienna, VA22182, USATel:1 571 223 5400 Fax:1 571 633 9517E-mail:daejinusa@gmail.com

dsp DohaP.O.Box 40281, Doha, QatarTel:974 44504309 Fax:974 44504296E-mail:dspdoha@gmail.com

dsp ChinaRoom2001, Unit 1, Building 429, Wangjingxiyuan,Chaoyang District, Beijing, ChinaTel:86 10 85866742 Fax:86 10 68020666