r jp steel plantech co.steelplantech.com/wp-content/uploads/2015/03/jpsteelplan... · 2015. 4....
TRANSCRIPT
EuropEan StEEl tEchnology and application dayS
düSSEldorf, gErmany ccd congrESS cEntEr düSSEldorf
15 – 19 JunE 2015
www.metec-estad2015.com
IronmakIng
SteelmakIng
rollIng
Steel materIalS and theIr applI-catIon, Surface technologIeS
envIronmental and energy aSpectS
program
• RawMaterialsincl.Benefication
• Cokemaking
• SinteringandPelletising
• BlastFurnaceIronmaking
• DirectReductionandSmeltingReduction
IronmakIng
Prog
ram
Ironmaking
7
9Ironmaking
tuesday: 16 June Wednesday: 17 June thursday: 18 Junetrack a track B track c track a track B track c track d track a track B track c track d track e track f
09:00
10:00
11:00
12:00
13:00
14:00
15:00
16:00
17:00
18:00
18:30
opening of 10:00 metec and 2nd eStad 2015
11:00
plenary 11:30 Session 1 Newest Develop. in Processes and Plants for the Production of Steel 12:50
Session 1 14:00Cokemaking – Fundamentals 1 (p. 10)
15:40Coffee break
Session 4 16:00Cokemaking – Fundamentals 2(p. 11)
17:20
plenary 11:30 Session 2 Steel Materials and their Application 12:50
Session 2 14:00Blast Furnace Ironmaking – Overview (p. 10)
15:20
Coffee break
Session 5 16:00Blast Furnace Ironmaking – Fundamentals 1(p. 11)
17:40
Session 3 14:00Blast Furnace Ironmaking – Blast Furnace Campaign Life Extensions 1 (p. 10) 15:40
Coffee breakSession 6 16:00Blast Furnace Ironmaking – Blast Furnace Campaign Life Extensions 2(p. 12) 17:40
Session 7 09:00Cokemaking – Coal blending practices and handling (p. 12)
10:40
Coffee breakSession 12 11:00Cokemaking – Latest Developments in Slot Oven Plant Technology and Design (p. 14)
13:00Lunch
Session 18 14:00Cokemaking – Heat Recovery Oven Plant Technology and Design; New Cokemaking Tech. (p. 16) 15:20
Session 8 09:00Blast Furnace Ironmak-ing – Fundamentals 2 (p. 12)
10:20
Coffee break
Session 13 11:00Blast Furnace Ironmaking – Blast Furnace Relinings (p. 14)
12:20Lunch
Session 15 13:20Blast Furnace Ironmaking – Blast Furnace Refractories and Cooling 1 (p. 15)
15:00Coffee break
Session 19 15:40Blast Furnace Ironmaking – Blast Furnace Refractories and Cooling 2 (p. 17) 17:00
Session 9 09:00Direct Reduction and Smelting Reduction – Fundamentals 1(p. 13)
10:20
Coffee breakSession 11 10:40Direct Reduction and Smelting Reduction – Fundamentals 2 (p. 14) 11:40
Lunch
Session 16 13:40Blast Furnace Ironmaking – Modern Process Control Techniques 1 (p. 15)
15:40Coffee break
Session 20 16:00Blast Furnace Ironmaking – Modern Process Control Techniques 2 (p. 17)
18:00
Session 10 09:0Sintering and Pelletizing – Fundamentals 1 (p. 13)
10:40Coffee break
Session 14 11:00Sintering and Pelletizing – Fundamentals 2 (p. 15)
12:20Lunch
Session 17 13:40Sintering and Pelletiz-ing – Fundamentals 3 (p. 16)
15:00 Coffee break
Session 21 16:00Sintering and Pelletizing – Sinter Plant: Waste Gas Recycling and Waste Gas Cleaning (p. 17)
18:00
Session 22 09:00Cokemaking – Coke Plant Technologies 1 (p. 18)
11:00 Coffee break
Session 32 11:20Cokemaking – Coke Plant Technologies 2 (p. 21)
13:00 Lunch
Session 37 13:40Cokemaking – Coke Quenching Technologies (p. 23)
14:40Coffee break
Session 23 09:00Blast Furnace Ironmaking – Blast Furnace Charging (p. 18)
10:40 Coffee break
Session 31 11:00BF – Hot Metal and Slag Quality, Slag Granula-tion (p. 21) 12:00
Coffee breakSession 35 12:20BF – Coke Quality Re-quirements and Reduced Coke Rates (p. 22) 13:20
Lunch
Session 40 14:20BF– BF Liquid Manage-ment and Casting Prac-tice (p. 24) 15:20
Session 24 09:00Blast Furnace Ironmak-ing – Injection of Auxiliary Reductants and Oxygen 1 (p. 19) 10:20
Coffee breakSession 28 10:40Blast Furnace Ironmak-ing – Injection of Auxiliary... (p. 20) 11:40
Coffee breakSession 33 12:00Blast Furnace Ironmaking – Hot Blast Stoves 1 (p. 22)
13:20Lunch
Session 39 14:00Blast Furnace Ironmak-ing – Hot Blast Stoves 2 (p. 23) 14:40
Session 25 09:00DR / SR – Gas-based DRI Processes and New Developments 1 (p. 19)
10:20
Coffee breakSession 29 10:40DR / SR – Gas-based DRI Processes and New Develop. 2 (p. 20) 11:40
Coffee breakSession 34 12:00DR / SR – Production and Use of DRI and HBI (p. 22) 13:00
Lunch
Session 38 13:40DR / SR – Smelting Reduction Processes (p. 23) 14:40
Session 26 09:00Sintering and Pelletizing – Sinter Process Optimization 1 (p. 19)
10:20Coffee break
Session 30 10:40Sintering and Pelletizing – Sinter Process Optimization 2 (p. 21)
12:20Lunch
Session 36 13:20Sintering and Pelletizing – Pelletizing (p. 23)
14:20
Session 27 09:00Raw Materials incl. Benefication (p. 20)
10:00
program overview | Ironmaking
closing Session: 15:30 Future technology trends and demands for iron and steelmaking processes and steel materials grades 17:00
23Ironmaking
thursday, 18 June | Session 35 – 39
13:00 coke cSr effect on blast furnace performance, v. titov, I. Kurunov, Novolipetsk Steel, Russia
thursday, 18 June 201513:20-14:20 | track e | Session 36Sintering and pelletizing – pelletizing
13:20 circular pelletizing technology – a revolutionary solution, r. redl, A. Fulgencio, C. Aichinger, B. Hiebl, Primetals Technologies, Austria
13:40 predicting iron ore pellet degradation during handling from pellet plant to steel mill, m. otaviano, L. M. Tavares, R. Magalhães de Carvalho, M. R. Rocha, H. Cardoso, Samarco Mining, Brazil
14:00 present Ijmuiden limestone-dolomite pellets: evolution of the pellet flux, W. husslage, J. Tijmensen, J. Small, R. Jonckbloedt, H. Jak, Tata Steel, Netherlands
tuesday, 18 June 201513:40-14:40 | track a | Session 37cokemaking – coke Quenching technologies
13:40 experience of tata Steel’s first cdQ stabilisation, B. Biswas, A. Kumar, R. Sahu, S. Singh, P. Mishra, S. K. Haldar, Tata Steel, India
14:00 advanced technology and application of large-scale cdQ, n. hamasaki, M. Watanabe, JP Steel Plantech Co., Japan
14:20 Spread of coke dry Quenching System – Introduction of merits and importance of stability of the plant-, k. kishimoto, T. Seitaro, Nippon Steel & Sumikin Engineering Co. Ltd., Japan
tuesday, 18 June 201513:40-14:40 | track d | Session 38direct reduction and Smelting reduction – Smelting reduction processes
13:40 corex® – an answer for hot metal production in a changing environment, W. Sterrer, J. Shibu, J. Wurm, Primetals Technologies, Austria
14:00 fIneX® – an old vision of the iron and steel industry becomes reality, J. Shibu, W. Sterrer, Primetals Technologies, Y. Sang-ho, S. Sungkee, Posco Ltd., Austria
14:20 the hIsarna ironmaking process, m. koen, K. Meijer, J. van der Stel, C. Zeilstra, C. Teerhuis, G. Keilman, M. Ouwehand, Tata Steel, Netherlands
thursday, 18 June 201514:00-14:40 | track c | Session 39Blast furnace Ironmaking – hot Blast Stoves 2
14:00 rebuilding of the Bf a stoves of voestalpine Stahl linz, r. allmannsdörfer, E. Schaub, M. Gantenberg, S. Duesterberg, Paul Wurth Refractory & Engineering GmbH, Germany
14:20 development of an empirical model for hot stove system at the iron-making plant-making plant, J. orre, J. Zetterholm, C. Wang, Swerea MEFOS, S. Kotzich, BFI, D. Lindström, SSAB, Sweden, J. Schlimbach, DK-Recycling, Germany
Steelmaking
Prog
ram• OxygenSteelmaking
• ElectricSteelmaking
• ContinuousCasting,Near-netShapeCastingandIngotCasting
SteelmakingSteelmaking
25
26 Steelmaking
program overview | Steelmaking
tuesday: 16 June Wednesday: 17 June thursday: 18 Junetrack d track e track f track g track h track e track f track g track h track f track g track h track J
09:00
10:00
11:00
12:00
13:00
14:00
15:00
16:00
17:00
18:00
18:30
opening of 10:00 metec and 2nd eStad 2015
11:00
plenary 11:30 Session 1 Newest Develop. in Processes and Plants for the Production of Steel 12:50
Session 1 14:00Casting – Plants, Revampings and New Installations 1 (p. 28)
15:40Coffee break
Session 6 16:00Casting – Plants, Revampings and New Installations 2 (p. 30)
17:40
plenary 11:30 Session 2 Steel Materials and their Application 12:50
Session 2 14:00Casting – Secondary Cooling (p. 28)
15:40Coffee break
Session 7 16:00Casting – Technology and Plant Equipment 1 (p. 30)
17:40
Session 3 14:00Casting – Monitoring, Scheduling and Logistics (p. 29)
15:00Coffee break
Session 8 16:00Casting – Ingot Casting (p. 30)
17:40
Session 4 14:20Electric Steelmaking – Raw Materials and Refractories (p. 29)
16:00Coffee break
Session 9 16:20Electric Steelmaking – New EAF Processes (p. 31)
18:20
Session 5 14:20Oxygen Steelmak-ing – Secondary Metallurgy (p. 29)
16:00Coffee break
Session 10 16:20Oxygen Steelmaking – Plants, Processs and Logistics (p. 31)
18:20
Session 11 09:00Casting – Tundish (p. 31)
11:00 Coffee break
Session 17 11:20Casting – Submerged Entry Nozzle and Mold 1 (p. 34)
12:20Lunch
Session 20 14:00Casting – Submerged Entry Nozzle and Mold 2 (p. 35)
15:20Coffee break
Session 23 16:00Casting – Submerged Entry Nozzle and Mold 3 (p. 36)
17:00
Session 12 09:00Casting – Additives and Refractories 1 (p. 32)
10:20 Coffee break
Session 15 10:40Casting – Additives and Refractories 2 (p. 33)
12:00Lunch
Session 19 13:40Casting – Product Quality 1 (p. 34)
15:20Coffee break
Session 24 16:00Casting – Product Quality 2 (p. 36)
18:00
Session 13 09:00Electric Steelmaking – EAF Technology (p. 32)
11:00Coffee break
Session 18 11:20Electric Steelmaking – Process Optimization (p. 34)
13:00 Lunch
Session 22 14:20Electric Steelmaking – Process Control 1 (p. 35)
15:40Coffee break
Session 25 16:00Electric Steelmaking – Process Control 2 (p. 37)
17:20
Session 14 09:00Oxygen Steelmaking – Hot Metal Pretreatment (p. 33)
10:40 Coffee break
Session 16 11:00Oxygen Steelmaking – Environmental Technology and Safety (p. 33)
12:40Lunch
Session 21 14:00Oxygen Steelmaking – Process Optimization, Automation and Monitoring 1 (p. 35)
15:40Coffee break
Session 26 16:00Oxygen Steelmaking – Process Optimization, Automation and Monitoring 2 (p. 37)
17:20
Session 30 11:00Oxygen Steelmaking – Process Modelling and Control (p. 38)
12:40Lunch
Session 27 09:00Casting – Technology and Plant Equipment 2(p. 37)
10:20Coffee break
Session 31 11:00Casting – Technology and Plant Equipment 3(p. 39)
13:00Lunch
Session 34 13:40Casting – Modelling and Simulation 2 (p. 40)
15:00
Session 28 09:00Casting – Product Quality 3 (p. 38)
10:40Coffee break
Session 33 11:20Casting – Modelling and Simulation 1 (p. 40)
13:00Lunch
Session 35 13:40Casting – Process Optimization (p. 40)
15:20
Session 29 09:00Electric Steelmaking – Process Automation and Monitoring (p. 38)
10:40Coffee break
Session 32 11:00Electric Steelmaking – Secondary Metallurgy and EAF Fundamentals(p. 39)
13:00Lunch
Session 36 13:40Electric Steelmaking – Environmental Technology (p. 41)
15:20
evening event mS rheinenergie
27Steelmaking
program overview | Steelmaking
tuesday: 16 June Wednesday: 17 June thursday: 18 Junetrack d track e track f track g track h track e track f track g track h track f track g track h track J
09:00
10:00
11:00
12:00
13:00
14:00
15:00
16:00
17:00
18:00
18:30
opening of 10:00 metec and 2nd eStad 2015
11:00
plenary 11:30 Session 1 Newest Develop. in Processes and Plants for the Production of Steel 12:50
Session 1 14:00Casting – Plants, Revampings and New Installations 1 (p. 28)
15:40Coffee break
Session 6 16:00Casting – Plants, Revampings and New Installations 2 (p. 30)
17:40
plenary 11:30 Session 2 Steel Materials and their Application 12:50
Session 2 14:00Casting – Secondary Cooling (p. 28)
15:40Coffee break
Session 7 16:00Casting – Technology and Plant Equipment 1 (p. 30)
17:40
Session 3 14:00Casting – Monitoring, Scheduling and Logistics (p. 29)
15:00Coffee break
Session 8 16:00Casting – Ingot Casting (p. 30)
17:40
Session 4 14:20Electric Steelmaking – Raw Materials and Refractories (p. 29)
16:00Coffee break
Session 9 16:20Electric Steelmaking – New EAF Processes (p. 31)
18:20
Session 5 14:20Oxygen Steelmak-ing – Secondary Metallurgy (p. 29)
16:00Coffee break
Session 10 16:20Oxygen Steelmaking – Plants, Processs and Logistics (p. 31)
18:20
Session 11 09:00Casting – Tundish (p. 31)
11:00 Coffee break
Session 17 11:20Casting – Submerged Entry Nozzle and Mold 1 (p. 34)
12:20Lunch
Session 20 14:00Casting – Submerged Entry Nozzle and Mold 2 (p. 35)
15:20Coffee break
Session 23 16:00Casting – Submerged Entry Nozzle and Mold 3 (p. 36)
17:00
Session 12 09:00Casting – Additives and Refractories 1 (p. 32)
10:20 Coffee break
Session 15 10:40Casting – Additives and Refractories 2 (p. 33)
12:00Lunch
Session 19 13:40Casting – Product Quality 1 (p. 34)
15:20Coffee break
Session 24 16:00Casting – Product Quality 2 (p. 36)
18:00
Session 13 09:00Electric Steelmaking – EAF Technology (p. 32)
11:00Coffee break
Session 18 11:20Electric Steelmaking – Process Optimization (p. 34)
13:00 Lunch
Session 22 14:20Electric Steelmaking – Process Control 1 (p. 35)
15:40Coffee break
Session 25 16:00Electric Steelmaking – Process Control 2 (p. 37)
17:20
Session 14 09:00Oxygen Steelmaking – Hot Metal Pretreatment (p. 33)
10:40 Coffee break
Session 16 11:00Oxygen Steelmaking – Environmental Technology and Safety (p. 33)
12:40Lunch
Session 21 14:00Oxygen Steelmaking – Process Optimization, Automation and Monitoring 1 (p. 35)
15:40Coffee break
Session 26 16:00Oxygen Steelmaking – Process Optimization, Automation and Monitoring 2 (p. 37)
17:20
Session 30 11:00Oxygen Steelmaking – Process Modelling and Control (p. 38)
12:40Lunch
Session 27 09:00Casting – Technology and Plant Equipment 2(p. 37)
10:20Coffee break
Session 31 11:00Casting – Technology and Plant Equipment 3(p. 39)
13:00Lunch
Session 34 13:40Casting – Modelling and Simulation 2 (p. 40)
15:00
Session 28 09:00Casting – Product Quality 3 (p. 38)
10:40Coffee break
Session 33 11:20Casting – Modelling and Simulation 1 (p. 40)
13:00Lunch
Session 35 13:40Casting – Process Optimization (p. 40)
15:20
Session 29 09:00Electric Steelmaking – Process Automation and Monitoring (p. 38)
10:40Coffee break
Session 32 11:00Electric Steelmaking – Secondary Metallurgy and EAF Fundamentals(p. 39)
13:00Lunch
Session 36 13:40Electric Steelmaking – Environmental Technology (p. 41)
15:20
track aclosing Session: 15:30 Future technology trends and demands for iron and steelmaking processes and steel materials grades 17:00
31Steelmaking
tuesday, 16 June | Session 9 – 11
tuesday, 16 June 2015 16:20-18:20 | track g | Session 9 electric Steelmaking – new eaf processes
16:20 Intelligent and holistic steel making, m. fleischer, J. Apfel, Primetals Technologies, Germany
16:40 the most advanced power saving technology in eaf – introduction to ecoarc™, t. nagai, Y. Sato, H. Kato, M. Fujimoto and T. Sugasawa JP Steel Plantech Co., Japan
17:00 use and advantages of ecoSIfc process, e. martinez rehlaender, SvMet Engineering S.A., Mexico
17:20 Quantum – first results from tyaSa, J. apfel, A. Müller, D. Steiner, Primetals Technologies, Germany
17:40 a new consteel evolution with irecovery: better performances in steel production with heat recovery for district heating & orc turbine power generatio, r. granderath, C. Giavani, Tenova SpA, U. De Miranda, R. Bontempi, ORI MARTIN, Italy
18:00 Sharc – the cost effective melting machine, a. metzen, Hellenic Halyvourgia, Greece, T. Germershausen, J. Bader, A. Bergs, SMS Siemag AG, Germany
tuesday, 16 June 2015 16:20-18:20 | track h | Session 10 oxygen Steelmaking – plants, processs and logistics
16:20 modification and revamp of Bof converter a at Salzgitter flachstahl gmbh, r. kromarek, A. Berghöfer, M. Bürgel, Salzgitter Flachstahl GmbH, J. Bader, A. Frankenberger, L. Meier, SMS Siemag AG, Germany
16:40 Successful revamp of Bof3 at arcelormittal gent, Belgium, g. verbeeck, N.N., ArcelorMittal Gent, Belgium, T. Germershausen, J. Bader, U. Gerike, SMS Siemag AG, Germany
17:00 efficient scrap and drI melting with jet process, g. Wimmer, K. Pastucha, A. Fleischanderl, J. Spiess, Primetals Technologies, Austria
17:20 time management at the Bof meltshop 2 of thyssenkrupp Steel europe ag in duisburg Beeckerwerth, t. maniura, M. Arns, J. Drewes, ThyssenKrupp Steel Europe AG, Germany
17:40 a model for sequencing and optimizing steel melt shop operations using discrete event system simulation, a. mukherjee, A. Adak, M.N. Dastur & Co (P) Ltd, India
18:00 Steel plant model – the comprehensive solution for steel plant logistics, f. Schrama, G. van Hattum, D. Merkestein, Danieli Corus BV, Netherlands
Wednesday, 17 June 2015 9:00-11:00 | track e | Session 11 casting – tundish
9:00 cfd optimization of a six-strand continuous casting tundish at georgsmarienhütte gmbh, Z. cancarevic, E. Runschke, H. Schliephake, T. Wurm, Georgsmarienhütte GmbH, Germany
9:20 effect of non isothermal melt flows on liquid metal quality in a tundish, k. chattopadhyay, S. Chatterjee, University of Toronto, M. Isac, R. I. L. Guthrie, McGill University, Canada
33Steelmaking
Wednesday, 17 June | Session 13 – 16
10:40 the new generation of SIS injector for improved eaf processes, h.-J. odenthal, S. Bues, P. Starke, R. Nörthemann, SMS Siemag AG, M. Lohmeier, Peiner Träger GmbH, Germany
Wednesday, 17 June 2015 9:00-10:40 | track h | Session 14 oxygen Steelmaking – hot metal pretreatment
9:00 effect of temperature on desulphurization abilities of different agents, d. Sichen, D. Lindström, Royal Institute of Technology, S. Karamoutsos, Lhoist, Sweden
9:20 pretreatment and refining of hot metal – efficient technolo-gies to cope with today’s sulphur and phosphorous challenges, r. hüsken, J. Meier-Kortwig, Küttner GmbH & Co. KG, Germany, S. Sakai, JP Steel Plantech, Japan
9:40 Improving hot metal desulphurization process performance – a case study, y. gordon, S. Kumar, Hatch, Canada
10:00 Study of the phases formed in hot metal dephosphoriza-tion slags and its influence on the dephosphorization ef-ficiency, J. r. oliveira, S. M. R. Oliveira, F. Costa Broseghini, Federal Institute of Espiríto Santo-IFES, Brazil
10:20 revamping of the hot metal desulphurization stations at taiyuan Iron & Steel (china), r. hüsken, H. Rath, Küttner GmbH & Co. KG, Germany W. Qiang, Shanxi Taigang Stainless Steel Co. Ltd., China
Wednesday, 17 June 2015 10:40-12:00 | track f | Session 15 casting – additives and refractories 2
10:40 low-carbon spinel stopper rod tip in a thin-slab caster, p. nolli, Vesuvius Refratarios Ltda, Brazil, J. Aube, A. Munto, A. Morrison, D. Harmon, Vesuvius, S. Wigman, R. Deckard, Nucor Steel Indiana, USA
11:00 optimized ar supply from tundish to mould by using the Shp stopper, g. krumpel, RHI AG, Austria
11:20 a modern refractory approach to tundish technology and processes, m. casado, B. Brosz, A. Viertauer, D. Wappel, RHI AG, Austria
11:40 tundish refractory optimization for yield, process and productivity improvements at Bhilai Steel plant, J. richaud, Vesuvius, France, V. Dhawan, Bhilai Steel Plant, India
Wednesday, 17 June 2015 11:00-12:40 | track h | Session 16 oxygen Steelmaking – environmental technology and Safety
11:00 first operating experiences with post-combustion lances in Bof steelmaking ld3, h. panhofer, J. Lehner, M. W. Egger, voestalpine Stahl GmbH, Austria M. Strelbisky, Tallman Bronze Ltd, Canada
11:20 the interaction between Bof operating practices and dust collection water quality, S. Brell, Bluescope Steel Ltd., A. Pask, Nalco, Australia
Rolling
PRog
Ram• RollingofLongProducts
• RollingofFlatProducts
• ColdRolling
Rolling
43
44 Rolling
program overview | rolling
tuesday: 16 June Wednesday: 17 June thursday: 18 Junetrack J track k track l track J track k track k track l track m
09:00
10:00
11:00
12:00
13:00
14:00
15:00
16:00
17:00
18:00
18:40
opening of 10:00 metec and 2nd eStad 2015
11:00
plenary 11:30 Session 1 Newest Develop. in Processes and Plants for the Production of Steel 12:50
Session 1 14:00Rolling – Design and Manag. of Mill Assets 1 (p. 45) 15:00
Coffee breakSession 4 15:20Rolling – Design and Management of Mill Assets 2(p. 45) 16:40
Coffee breakSession 7 17:20Rolling Rolls and Roll Technology (p. 46)
18:40
plenary 11:30 Session 2 Steel Materials and their Application 12:50
Session 2 14:00Rolling – Reheat-ing Furnaces and Reheating(p. 45) 15:20
Coffee break
Session 6 16:00Rolling – Level-ling, Slitting and Dividing (p. 46)
17:40
Session 3 14:00Rolling – Plate Rolling 1 (p. 45)
15:20Coffee break
Session 5 15:40Rolling – Plate Rolling 2 (p. 46)
17:20
Coffee break
Session 8 09:00Rolling – Hot Strip Rolling 1(p. 47)
10:40Coffee break
Session 10 11:00 Rolling – Hot Strip Rolling 2(p. 47)
12:40
Session 12 13:40Rolling – Hot Strip Rolling 3 (p. 48) 15:20
Coffee break
Session 14 15:40Rolling – Automa-tion, Control and Measurements 1 (p. 49)
17:40
Session 9 09:00 Rolling – Cold Sheet Rolling & Annealing 1 (p. 47)
11:00Coffee break
Session 11 11:20 Rolling – Cold Sheet Rolling & Annealing 2(p. 48)
13:00
Session 13 14:00Rolling – Cold Sheet Rolling & Annealing 3 (p. 49)
16:00
Coffee breakSession 15 16:20Rolling – Cold Sheet Rolling & Annealing 4 (p. 49)
18:00
Session 16 09:00Rolling – Hot Strip Rolling 4 (p. 50)
10:40Coffee break
Session 19 11:00 Rolling – Automation, Control and Measurements 2(p. 51)
12:40
Session 22 13:40Rolling – Automation, Control and Measurements 3(p. 52) 15:20
Session 17 09:00Rolling – Modelling and Simulation 1 (p. 50)
10:40Coffee break
Session 21 11:20Rolling – Modelling and Simulation 2 (p. 52)
13:00
Session 18 09:00Rolling – Long Products Rolling 1 (p. 51)
10:40Coffee break
Session 20 11:00Rolling – Long Products Rolling 2 (p. 51)
12:20
Session 23 13:40Rolling – Long Products Rolling 3 (p. 53) 15:20
lunch
evening event mS rheinenergie
track a 15:30closing Session: Future technology trends and demands for iron and steelmaking processes and steel materials grades 17:00
45Rolling
tuesday, 16 June | Session 1 – 4
tuesday, 16 June 2015 14:00-15:00 | track J | Session 1rolling – design and management of mill assets 1
14:00 fatigue assessment of universal cardan joint based on laboratory specimen tests, a. donadon, P. Palma, G. Tiussi, A. De Luca, Y. Raffaglio, Danieli & Co. Officine Meccaniche SpA, Italy
14:20 drivetrain studies: modernization solutions tailor-made, k. lazzaro, F. Benfer, E. Jung, SMS Siemag AG, Germany
14:40 development of tension leveler for advanced high Strength Steel (ahSS), h. uematsu, K. Abe, JP Steel Plantech Co., Japan
tuesday, 16 June 2015 14:00-15:20 | track k | Session 2rolling – reheating furnaces and reheating
14:00 reducing production costs at the hot strip mill by optimization of the heating and cooling procedures of the reheat furnaces, p. van Beurden, P. Put, R. Siebring, F. Beukema, Tata Steel, Netherlands
14:20 revamping of reheating furnaces, m. fantuzzi, E. Castellano, Tenova, Italy
14:40 nonlinear model predictive control “mpc” for slab reheating furnace based on transient numerical model, f. lawayeb, X. M. Nguyen, A. Mouchette, ArcelorMittal R&D, P. Rodriguez, D. Dumur, Supélec Paris, France
15:00 cmI technology to reach efficiently best quality on reheat furnaces, J.-f. Benedetto, L. Malpas, CMI, Belgium
tuesday, 16 June 2015 14:00-15:20 | track l | Session 3rolling – plate rolling 1
14:00 mulpIc® – the most powerful metallurgical tool in modern plate production process, S. Samanta, M. Chalmers, Primetals Technologies, United Kingdom
14:20 heavy plate mill of acroni – rolling mill and heat treatment line modernization for a producer of special steel grades, r. robic, ACRONI d.o.o., Slovenia, H.-J. Seiter, G. Horn, SMS Siemag AG, Germany, A. Vaccani, SMS INNSE S.p.A., Italy
14:40 progressing technology of roller leveler for high strength steel plate, t. Shimamura, T. Aoyama, K. Abe, JP Steel Plantech Co., Japan
15:00 estimation of the thickness asymmetry using models for the contour evolution and vision-Based measurements of plates in hot rolling, f. Schausberger, A. Steinboeck, A. Kugi, Vienna University of Technology, Austria, M. Jochum, D. Wild, AG der Dillinger Hüttenwerke, Germany
tuesday, 16 June 2015 15:20-16:40 | track J | Session 4rolling – design and management of mill assets 2
15:20 laser beam welder installation with a complete set, t. fujii, JFE Steel Corporation, Japan
15:40 elimination of third-octave mill chatter vibration in cold rolling – first successful pilot installation, k. krimpelstaetter, G. Keintzel, Primetals Technologies, Austria
47Rolling
tuesday, 16 June | Session 7 / Wednesday, 17 June | Session 7 – 10
18:00 Substitution of hard chrome plating for rolls of skin-pass and temper mills, J. crahay, D. Debrabandere, J. Vanhumbeeck, CRM, J. Lesenne, CSNChrome, Belgium, F. Bixquert, F. Jansen, Oerlikon Metco-F, Germany, G. Evans, Sarclad-UK, United Kingdom, R. Brôcking, P. H. Bolt, Tata Steel, Netherlands, J. Bertrandie, H. Dietsch, ArcelorMittal, France
18:20 results with the next generation eddy current technology for roll inspection systems, r. van kollenburg, E. van den Elzen, S. Mul, LISMAR Engineering B.V., Netherlands
Wednesday, 17 June 2015 9:00-10:40 | track J | Session 8rolling – hot Strip rolling 1
9:00 Sampling and strapping of high-strength steel grades – new ways in hot-strip logistics, a. Bergmann, ArcelorMittal Bremen, V. Brück, SMS Logistiksysteme GmbH, Germany
9:20 new times – new products – new tools – ahSS production with arvedi eSp, B. linzer, Primetals Technologies, Austria
9:40 enhanced technologies for rolling advanced high-strength steel grades in hot-strip mills, J. thoresson, E. Opitz, K. Weinzierl, Primetals Technologies, Austria
10:00 fit for the future: continuous development of plant and process at outokumpu tornio plant, k.-f. müller, SMS Siemag AG, N.N., Outokumpu Oy, Germany
10:20 new graphitised hSS materials for rolls in finishing stands, c. Zybill, V. Goryany, M. Neumann, J. Buch, Karl Buch Walzengiesserei GmbH & Co. KG, Germany
Wednesday, 17 June 2015 9:00-11:00 | track k | Session 9rolling – cold Sheet rolling & annealing 1
9:00 new rolling method of reversing cold rolling mill, y. kannaka, T. Kikkawa, JP Steel Plantech Co., Japan
9:20 comprehensive cfd model toward the optimization of the batch annealing cycle, m. alharbi, K. Cheema, M. Al-Mojil, M. Zaheer, D. Dinaker, SABIC, Saudi Arabia
9:40 new compact tandem cold mill – all in one solution for efficient cold rolling, t. Bode, R. Holz, C. Schwarz, SMS Siemag AG, Germany
10:00 optimization of product sequences in continuous strip processing lines, t. tschapowetz, M. Boeck-Schnepps, Andritz AG, A. Steinboeck, A. Kugi, Vienna University of Technology, Austria
10:20 future-oriented pass schedule calculation for the cold rolling process, J. polzer, R. Lathe, VDEh Betriebsforschungsinstitut GmbH, J. Kazmierski, Outokumpu Nirosta GmbH, Germany
10:40 three-stand pltcm: technology and actual outstanding results, m. turchetto, M. Svetina, L. Vignolo, Danieli & Co. Officine Meccaniche SpA, Italy
Wednesday, 17 June 2015 11:00-12:40 | track J | Session 10rolling – hot Strip rolling 2
11:00 arcelormittal Indiana harbor Works – 84" hot strip mill looper upgrade to support line pipe products, W. umlauf, P. Trippel, L. Campbell, T. Willis, ArcelorMittal, USA
48 Rolling
Wednesday, 17 June | Session 10 – 12
11:20 thin is beautiful – eSp to further develop the cold band substitute market, a. Jungbauer, B. Linzer, A. Viehböck, Primetals Technologies, Austria
11:40 New hot strip mill of Habaş – design, project execution and operational results, S. Berger, H.-J. Seiter, J. F. Benner, SMSSiemagAG,Germany,B.Çelik,H.Çakmak,HabaşA.S.,Turkey
12:00 danieli universal endless (due) the new evolution of danieli thin Slab casting and rolling plant, m. Bulfone, A. Pigani, Danieli & Co. Officine Meccaniche SpA, Italy
12:20 next generation strip steering controller using optical measurement of strip alignment and curvation for hot finishing mills, m. kurz, A. Lorenz, Primetals Technologies, Germany, B. Weisshaar, H. Hlobil, Primetals Technologies, A. Galkina, P. Gruber, Y. Vetyukov, J. Gerstmayr, K. Schlacher, Johannes Kepler University, Austria
Wednesday, 17 June 2015 11:20-13:00 | track k | Session 11rolling – cold Sheet rolling & annealing 2
11:20 new pl-tcm, pickling and tandem cold strip mill, in vietnam, t. kikkawa, JP Steel Plantech Co., Japan, T. Kumai, JP Steel Plantech Co., Vietnam
11:40 emg-vivaldi®: Industrial proof of the new paradigm for strip guiding in furnace atmospheres, a. flöter, M. Wied, EMG Automation GmbH, Germany
12:00 process and technologies to anneal current and future ahSS strips, e. magadoux, D. Delaunay, S. Mehrain, Fives Stein, France
12:20 cold-strip processing lines for automotive qualities and multi-purpose lines, m. cottin, F. Brühl, C. Sachteleben, M. Kretschmer, C. Sasse, SMS Siemag AG, Germany
12:40 advanced transitional system optimizer using model predictive control for continuous annealing, h. Wu, R. Speets, B. van Benschop, P. van Hasselt, Tata Steel, Netherlands
Wednesday, 17 June 2015 13:40-15:20 | track J | Session 12rolling – hot Strip rolling 3
13:40 development of mill setting assisting system for operators in hot strip mill, S. yanagi, M. Kobayashi, Y. Morimoto, T. Toyoda, Kobe Steel Ltd., Japan
14:00 Wedge & camber control, m. kurz, Primetals Technologies, Germany, T. Pumhoessel, A. Kainz, K. Zeman, Johannes Kepler University Linz, Austria
14:20 model based width control in finishing mills, d. kotzian, W. Tautz, Primetals Technologies, Germany
14:40 effect of oil film thickness on lubrication property in hot rolling, m. yukihiro, Y. Kimura, Y. Takashima, N. Nakata, JFE Steel Corporation, T. Hiruta, JFE Techno-Research, Japan
15:00 enhanced solutions for complex rolling mill modernization projects, k. pronold, W. Spies, J. Armenat, SMS Siemag AG, Germany
83
date: 19.06.2015time: 09:00 – 15:00
map of ccd South and the trade fairs
Rhein Löbbecke Museum+ Aquazoo
Beckbuschstraße
Stockumer Kirchstraße
AmHain
Danz
iger
Stra
ße
B 8
Kaiser
swer
ther
Stra
ße
Rotterdamer Straße
RestaurantCafé
450 m
Thewissenweg
Nordpark
Freiligrathplatz
2
1In
nens
tadt
4 k
m
Messe-Einfahrt/Tor 1Fair entrance/Gate 1
Zoll,SpediteureCustoms,Forwarders
Innenstadt 4 km
City 4 km
fn
3r
Flugh
ae
km
Airp
ot 3
km
City
4 k
m
Polizei, FundbüroPolice, Lost property office
LogistikzentrumLogistics Center
DüsseldorfFashionHouse 2
DüsseldorFashionHouse 1
f
Rheinbad
Heinz-Ingenstau-Str.
Autobahn/Motorway A44
0,5 km
Ost/East
CARAVAN CENTER
8a 8b
RheinnnineiehehRhRR Löbbecke Museum+ Aquazoo
Beckbuschstraße
Stockumer Kirchstraße
AmHain
Danz
iger
Stra
ße
B 8
Kaiser
swer
thrr
er S
traße
Rotterdamer Straße
RestaurantCafé
450 m
Thewissenweg
Nordpark
Freiligrathplatz
2
1In
nens
tadt
4 k
m
Messe-Einfahrt/Tor 1Fair entrance/Gate 1
Zoll,SpediteureCustoms,Forwarders
Innenstadt 4 km
City 4 km
fn
3r
Flugh
ae
km
Airp
ot 3
km
City
4 k
m
Polizei, FundbüroPolice, Lost property office
LogistikzentrumLogistics Center
DüsseldorfFashionHouse 2
DüsseldorFashionHouse 1
f
Rheinbad
Heinz-Ingenstau-Str.
Autobahn/Motorway A44
0,5 km
Ost/East
CARAVAN CENTER
8a 8b
5
4
910
12
11
14
13
16 1517
CCD OstCongressCenterDüsseldorf
CCD Stadthalle
f
CCD SüdCongressCenterDüsseldor
0–27PendelbusspurShuttle bus7a
60
78
79Duisburg
78 897896
78
U-BahnhofTram Station
Messe Nord
722
City
722
722
78/79
897 896722 CCD Pavillon
Süd/South722 896897
(Nord-Ost)*(North-East)**Nur für Pendelbusse(nicht bei allen Veranstaltungen geöffnet)
*For shuttle buses only(not available for all events)
Nord/North
WerkstattWorkshop
MagazinStoreroom
Hallen/Halls9 + 10
Hallen/Halls10 – 1315 – 17
Hallen/Halls3 + 4 + 5
Hallen/Halls13 + 14
Halle/Hall 7.0Verbände/AssociationsInstitutionen/InstitutionsHochschulen/Colleges and universities
CCD Ost/CCD SüdKongresse/Congresses
3
The Bright World of Metals28 June – 2 July 2011 • Düsseldorf, Germany
gif1102_01096.ai 09.09.2010 16:12:53 Uhr
registration and get-togetherMonday evening, 15 June, 17:00 – 20:00 18:00 – 21:00, in the CCD South in Düsseldorf. There will be entertainment and a finger buffet. Accompanying persons are also welcome free of charge.
addressCongress Centre South Stockumer Kirchstr. 61 40474 Düsseldorf, Germany
Hallen/Halls9 + 10
Hallen/Halls10 – 1315 – 17
Hallen/Halls3 + 4 + 5
Hallen/Halls13 + 14
Halle/Hall 7.0Verbände/AssociationsInstitutionen/InstitutionsHochschulen/Colleges and universities
CCD Ost/CCD SüdKongresse/Congresses
METEC & 2nd ESTAD 2015