r アウディ tt クーペ 3.2 クワトロ the finest …1...

2
1 ※ご使用前にこの説明書を良くお読みになり十分に理解してください。 Before beginning assembly, please read these instructions thoroughly. R THE FINEST RADIO CONTROL MODELS 取扱説明書 INSTRUCTION SHEET No.MZN77 AUDI TT Coupe 3.2 Quattro MINI-Z Racer MR-015 RM Type / AWD MA-010 Type MA-010 シャシーの準備 Preparation of Chassis 2 2 x 5mm 2x5mm ●組立てに必要な物 Tools : Must be prepared. ■カッターナイフ *Cutter Knife. ■ニッパー *Nippers 精密ドライバーか、 ドライバー(小) *A Phillips Screwdriver (Precision type or a small sized) + + リヤマウントタイプ(RMタイプ) Rear Mount Type (RM Type) シャシーを下記に合せます。 Assemble the chassis as shown below. モーター搭載位置 Motor mounting position 付属のフロントボディマウントに 交換してください。 Replace the front body mount with the one included in the set. フロントボディマウント Front Body Mount TP ビス TP Screw フロント ボディマウント Front body mount. シャシー Chassis ミニッツレーサー MR-015 RMタイプ用 / AWD MA-010用 MR-015 アウディ T T クーペ 3.2 クワトロ MZN77-T01 ビスのしめすぎに注意。 Caution : Do not screw-in excessively. 受信アンテナ Receiver Antenna 受信アンテナを下図の寸法に なるように加工してください。 Bend the receiver antenna as shown below. 15mm 受信アンテナ Receiver Antenna ホイルベース(M) Wheelbase (M) ホイルベース調整 Adjustment of Wheelbase 90mm 90mm ボディセット BODY SET

Upload: others

Post on 26-Apr-2020

2 views

Category:

Documents


0 download

TRANSCRIPT

1

※ご使用前にこの説明書を良くお読みになり十分に理解してください。Before beginning assembly, please read these instructions thoroughly.

R

THE FINEST RADIO CONTROL MODELS

取扱説明書INSTRUCTION SHEET

No.MZN77AUDI TT Coupe 3.2 QuattroMINI-Z Racer MR-015 RM Type / AWD MA-010 Type

MA-010

シャシーの準備Preparation of Chassis

2

2 x 5mm

2x5mm

●組立てに必要な物Tools : Must be prepared.

■カッターナイフ *Cutter Knife.

■ニッパー *Nippers

精密ドライバーか、 ドライバー(小)*A Phillips Screwdriver (Precision type or a small sized)■ + +

リヤマウントタイプ(RMタイプ)Rear Mount Type (RM Type)

シャシーを下記に合せます。Assemble the chassis as shown below.

モーター搭載位置Motor mounting position

付属のフロントボディマウントに交換してください。Replace the front body mount with the one included in the set.

フロントボディマウントFront Body Mount

TP ビスTP Screw

フロントボディマウントFront body mount.

シャシーChassis

ミニッツレーサー MR-015 RMタイプ用 / AWD MA-010用

MR-015

アウディ TT クーペ 3.2 クワトロ

MZN77-T01

ビスのしめすぎに注意。Caution : Do not screw-in excessively.

受信アンテナReceiver Antenna

受信アンテナを下図の寸法になるように加工してください。Bend the receiver antennaas shown below.

15mm

受信アンテナReceiver Antenna

ホイルベース(M)Wheelbase (M)

ホイルベース調整Adjustment of Wheelbase

90mm

90mm

ボディセット

BODY SET