quote 2010-2011
DESCRIPTION
Tamil to EnglishTRANSCRIPT
QUOTATION
To,
M/S ELAN INCORPORATED FZESAIF ZONE, SHARJAH – U.A.EPH:06-5576111, FAX:06-5575430
Quote Ref. No: R.V/1313/10
Date: Apl15, 2010
No. of pages: 01
Dear Sir, Thank you very much for your enquiry& we are pleased to quote you our best price for for the following items:
S.No Description QTY(Set) Rate/Unit Total Price(AED)
1
Fabrication and supply of screen frame made with 20X20X2mm hollow section and 25X25X2.5mm angle the frame size 950mm length 200mm with
06
75.00 450.00
Total: Four Hundred and Fifty Only 450.00
Terms & Conditions: 1. All materials are used in MS 2. Fabrication and supply as per your drawing. . 3. Work will be completed within 2 days after receipt of your P.O. 4. Payment:30 days PDC against delivery 5. Payments to be made to our A/C # 0032635844001 with Sharjah Islamic Bank.
QUOTATION
To,Mr. JUSTIN – MAINTENANCE INCHARGE
EMPOWER ENERGY SOLUTION
DUBAI – U.A.E
Quote Ref. No: R.V/1357/10
Date: 20.05.2010
No. of pages: 01
Dear Sir, Thank you very much for your enquiry& we are pleased to quote you our best price for construction of footings for water tank,
chiller pipe supports and back filling with gravel as per the below mentioned specifications S.No Description QTY Rate/Unit Total
Price(AED)1
2
3
Construction of plinth and footing for water tank with road base upto 200mm, PPC with RCC 8mm mesh, RCC concrete base 200 mm thick including shuttering
RCC for 10nos footing including excavation for footing, compacting road base & PDC
Back filling, Compacting & laying of ¾ size, 43m3 aggregate for 850m2 area
1
1
1
58401.00
75285.00
29484.00
58401.00
75285.00
29484.00
Total: One Lakh Sixty Three Thousand One Hundred and Seventy Only. 163170.00
Terms & Conditions: 1. All materials are specified as per your drawing. 2. Construction as per your drawing. . 3. Work will be completed within 3 weeks after receipt of your P.O. 4. Payment: a. 50% advance to be paid. And 50% at the time of delivery. b. Payments to be made to our A/C # 0032635844001 with Sharjah Islamic Bank.
QUOTATION
To,Mr. Sunil Kulkarni / Mr. VinodPower Plus Cable Co LLCP.O. Box: 5070, Fujairah – U.A.ETel: 09-2239255, Fax:09-2074455
Quote Ref. No: R.V/1366/10
Date: Jun 03, 2010
No. of pages: 01
Dear Sir, Thank you very much for your enquiry& we are pleased to quote you our special and best price for
fabrication and machining of FWD shaft as per your drawing & specs given below:
S.No Description QTY Rate/Unit Total Price(AED)
1 Machining of FWD machine shaft as per drawing in E.N-8 material the size of shaft is 158 dia with taper & step turning. Total length of shaft 363mm.
1 1750.00 1750.00
Total Dhs One Thousand Seven Hundred and Fifty Only. 1750.00
Terms & Conditions: 1. The shaft and nut is made in E.N-8 shaft 2. Item will be made as per drawing 3. Completion of work within 5 days from the date of receipt of your L.P.O 4. Payment: a. 60 days PDC after completion of work b. Payments to be made to our A/C # 0032635844001 with Sharjah Islamic Bank. 5. This quote is valid for 1 week only
QUOTATION
To,Mr. Sunil Kulkarni / Mr. VinodPower Plus Cable Co LLCP.O. Box: 5070, Fujairah – U.A.ETel: 09-2239255, Fax:09-2074455
Quote Ref. No: R.V/REV01/1366/10
Date: Jun 03, 2010
No. of pages: 01
Dear Sir, Thank you very much for your enquiry& we are pleased to quote you our special and best price for
fabrication and machining of FWD shaft as per your drawing & specs given below:
S.No Description QTY Rate/Unit Total Price(AED)
1 Machining of FWD machine shaft as per drawing in E.N-8 material the size of shaft is 158 dia with taper & step turning. Total length of shaft 363mm.
1 1350.00 1350.00
Total Dhs One Thousand Three Hundred and Fifty Only. 1350.00
Terms & Conditions: 1. The shaft and nut is made in E.N-8 shaft 2. Item will be made as per drawing 3. Completion of work within 5 days from the date of receipt of your L.P.O 4. Payment: a. 60 days PDC after completion of work b. Payments to be made to our A/C # 0032635844001 with Sharjah Islamic Bank. 5. This quote is valid for 1 week only
QUOTATIONTo,Mr.KAYED ZOHARM/S PRESSBOLT M.EP.O.BOX:802, ABUDHABI – U.A.EPH:02-5503000, FAX:02-5502404
Quote Ref. No: R.V/1379/10
Date: 23.06.2010
No. of pages: 03
Dear Sir, Thank you very much for your enquiry& we are pleased to quote you our best price for for the following
items:
S.No Description QTY Rate/Unit Total Price(AED)1
2
3
4
5
6
13010751U-bolt m10 for ½’’ pipe+nut,8.8,hdgU-bolt m-10 for ½’’ pipe c/w 4 nuts, gr 8.8, hot dip galvanized DWG#UB-CS+GALV-SMALL BORE
13010752U-bolt m10 for ¾’’ pipe+4nut, 8.8, hdgU-bolt m10 for ¾pipe c/w 4 nuts, gr,s.s, hot dip galvanized DRW#UB-CS+GALV-SMALL BORE
13010753U-bolt m10 for 1’’ pipe+4nut, 8.8, hdgU-bolt m10 for 1’’ pipe c/w 4nuts, gr, s.s, hot dip galvanized DWG#UB+GALV, SMALL BORE
13007326U-bolt m10 for 1 ½’’ pipe+4nut, 8.8, hdgU-bolt m10 for 1 ½’’ pipe c/w 4nuts, gr, s.s, hot dip galvanized dwg #UB-CS+GALV-SMALL BORE
13010747U-bolt m10 for ½’’ pipe+4nut, ss 316U-bolt m10 for ½’’ pipe c/w 4nuts, ss 316 dwg# UB-SS- SMALL BORE
13010748U-bolt m10 for ¾’’ pipe +4nut, ss 316U-bolt m10 for ¾ ‘’ pipe c/w 4nuts, ss 316, DWG#UB-SS-SMALL BORE
50SETS
65SETS
1010 SETS
410SETS
15SETS
10SETS
2.50
2.75
3.00
3.50
7.85
9.20
125.00
178.75
3030.00
1435.00
117.75
92.00
7
8
9
10
11
12
13
13010749U-bolt m10 for 1’’pipe +4nut, ss 316U-bolt m10 for 1’’ pipe c/w 4nuts,ss 316 dwg #UB-SS-SMALL BORE
13007884U-bolt m10 for 1 ½’’ pipe+4nut,ss 316U-bolt m10 for 1 ½’’ pipe c/w 4nuts, ss 316 dwg# UB-SS-SMALL BORE
13010755U-bolt m10-1/2’’ +4nut, 8.8, hdg, rubberU-bolt m10 for ½’’ pipe c/w 4nuts, gr, s.s, hot dip galvanized & rubber coating dwg# UB-CS+GALV+RUB-SMALL BORE
13010756U-bolt m10-3/4’’ +4nut, 8.8, hdg, rubberU-bolt m10 for ¾’’ pipe c/w 4 nuts, gr, s.s, hot dip galvanized & rubber coatingdwg#UB-CS+GALV+RUB-SMALL BORE
13010757U-bolt m10-1’’+4nut,8.8, hdg, rubberU-bolt m10 for 1’’ pipe c/w 4 nuts, gr, s.s. Hot dip galvanized & rubber coating dwg#UB-CS+GALV+RUB-SMALL BORE
13010759U-bolt m10-1 ½’’ +4nut, 8.8, hdg, rubberU-bolt m10 for 11/2’’ pipe c/w 4 nuts, gr.s.s, hot dip galvanized & rubber coating. dwg#UB-CS-GALV+RUB-SMALL BORE
13010771U-bolt 3’’, st.37k/8.8, hdg, ub132U-bolt 3’’ grade st.37k/8.8, hot dip galvanized type ub132. dwg#UB132
905 SETS
145SETS
05 SETS
10 SETS
20 SETS
480 SETS
2 SETS
9.20
10.60
2.50
2.75
2.90
3.40
5.10
8326.00
1537.00
12.50
27.50
58.00
1632.00
10.20
14 13010153U-bolt 2’’, st.37k/8.8, hdg, ub032U-bolt 2’’, grade st.37k/8.8, hot dipped galvType ub032Rod size:m10Nut:m10dwg#ub032
30 SETS 4.15 124.50
Total Dhs Sixteen Thousand Seven Hundred Six and Fils Twenty only 16706.20
Terms & Conditions: 1. Materials used are as mentioned above 2. Fabrication and supply as per your drawing. . 3. Work will be completed within 2 weeks after receipt of your P.O. 4. Payment:Immediate after delivery 5. Payments to be made to our A/C # 0032635844001 with Sharjah Islamic Bank.
QUOTATION
To,
M/S ELAN INCORPORATED FZESAIF ZONE, SHARJAH – U.A.EPH:06-5576111, FAX:06-5575430
Quote Ref. No: R.V/1313/10
Date: 26.06.2010
No. of pages: 01
Dear Sir, Thank you very much for your enquiry& we are pleased to quote you our best price for for the following items:
S.No Description QTY(Set) Rate/Unit Total Price(AED)
1
Fabrication and supply of screen frame made with 20X20X2mm hollow section and 25X25X2.5mm angle the frame size 950mm length 200mm with
06
75.00 450.00
Total: Four Hundred and Fifty Only 450.00
Terms & Conditions: 1. All materials are used in MS 2. Fabrication and supply as per your drawing. . 3. Work will be completed within 2 days after receipt of your P.O. 4. Payment:30 days PDC against delivery 5. Payments to be made to our A/C # 0032635844001 with Sharjah Islamic Bank.
QUOTATION
To,Mr. AJITH KUMAR-SALES DEPARTMENTM/S PERMA INTERNATIONAL FZCSAIF ZONE, SHARJAH – U.A.EPH:06-5574801, FAX:06-5574802
Quote Ref. No: R.V/1386/10
Date: 01.07.2010
No. of pages: 01
Dear Sir, Thank you very much for your enquiry& we are pleased to quote you our best price for for the following items:
S. No Description QTY Rate/Unit Total Price(AED)
1 Machining of raised face of PVC flanges for surface level.
150 6.00 900.00
Total AED Nine Hundred Only 900.00
Terms & Conditions: 1. All materials to be supplied and pick up from our workshop 2. Fabrication and supply as per your drawing. . 3. Work will be completed within 4 days after receipt of your P.O. 4. Payment: PDC along with delivery 5. Payments to be made to our A/C # 0032635844001 with Sharjah Islamic Bank. 6. This quote is valid for 1 week only.
QUOTATION
ToMr. Abdulquddus Lutfur RahmanM/S Prominent Juffali FZCSAIF Zone, Sharjah, U.A.EPH:06-5572626, FAX:06-5572226
Quote Ref. No: R.V/1428/10
Date: 24.08.2010
No. of pages: 01
Dear Sir, Thank you very much for your enquiry& we are pleased to quote you our best price for for the following items:
S. No Description QTY Rate/Unit Total Price(AED)
1 Fabrication and powder coating of steel skid as per your drawing no:10GA0865-03
02 Nos 3230.00 6460.00
Total AED Six Thousand Four Hundred and Sixty Only 6460.00
Terms & Conditions: 1. Item will be fabricated as per your drawing 2. The M.S tube used is 40X40X4mm and MS angle 40X40X5. 3. Item will be delivered in your warehouse. 4. Delivery 1 weeks from the date of receipt of L.P.O 5. Payments :
Cash (or) CDC on delivery of materials.Payments to be made to our A/C # 00326358844001 with Sharjah Islamic Bank
6. This quote is valid for 1 week only. Thanking You
For Aarya Engineering FZC
R.Krishnamurthy050-9743110
QUOTATION
ToTHE COMMERCIAL MGR/OPERATION HEADFUJAIRAH GOLD FZEP.O. BOX:3992, FUJAIRAH FREE ZONEFUJAIRAHPH:09-2282533, FAX:09-2282454
Quote Ref. No: R.V/1429/10
Date: 21.06.2010
No. of pages: 01
Dear Sir, Thank you very much for your enquiry& we are pleased to quote you our best price for for the following items:
S. No Description QTY Rate/Unit Total Price(AED)
1
2
New machining of guide rollers in H-13 material with heat treatment done.
Fabrication supply and installation of S.S – 310 grade material for upper launder choke threat
03 Nos
01 Set
125.00
675.00
375.00
675.00
Total AED One Thousand and Fifty Only 1050.00
Terms & Conditions: 1. Materials used are as mentioned above 2. Fabrication and supply as per your drawing. . 3. Work will be completed within 2 weeks after receipt of your P.O. 4. Payment:Immediate after delivery 5. Payments to be made to our A/C # 0032635844001 with Sharjah Islamic Bank
Thanking You
For Aarya Engineering FZC
R.Krishnamurthy050-9743110
QUOTATION
ToTHE COMMERCIAL MGR/OPERATION HEADFUJAIRAH GOLD FZEP.O. BOX:3992, FUJAIRAH FREE ZONEFUJAIRAHPH:09-2282533, FAX:09-2282454
Quote Ref. No: R.V/1430/10
Date: 21.06.2010
No. of pages: 01
Dear Sir, Thank you very much for your enquiry& we are pleased to quote you our best price for for the following items:
S. No Description QTY Rate/Unit Total Price(AED)
1
2
Modification with installation of 2’’ M.S sch-40 pipe with values & fitting in FEWA line – pump – water tank. A)2’’ M.S sch-40 pipe - 10.45mtr b)2’’ Ball valve - 03Nos c)2’’ Elbow - 04Nos d)2’’ Tee -02Nos
Installation of new ½’’ L.P.G line for launder ten dish pre beating. a)1/2’’ M.S sch-80 pipe -8.47mtr b)1/2’’ Ball valve -03Nos c)1/2’’ Elbow -01No
01 set
01 set
3000.00
1150.00
3000.00
1150.00
Total AED Four Thousand One Hundred and Fifty Only 4150.00
Terms & Conditions: 1. Materials used are as mentioned above 2. Fabrication and supply as per your drawing. . 3. Work will be completed within 2 weeks after receipt of your P.O. 4. Payment:Immediate after delivery 5. Payments to be made to our A/C # 0032635844001 with Sharjah Islamic Bank Thanking You
For Aarya Engineering FZC
R.Krishnamurthy050-9743110
QUOTATION
ToTHE COMMERCIAL MGR/OPERATION HEADFUJAIRAH GOLD FZEP.O. BOX:3992, FUJAIRAH FREE ZONEFUJAIRAHPH:09-2282533, FAX:09-2282454
Quote Ref. No: R.V/1431/10
Date: 04.07.2010
No. of pages: 01
Dear Sir, Thank you very much for your enquiry& we are pleased to quote you our best price for for the following items:
S. No Description QTY Rate/Unit Total Price(AED)
1
2
3
Fabrication, installation of steel works without materials in your site as per attached list
Fixing of new copper tube 6mm with our material at holding furnace
Fabrication, supply and installation of 10’’ dia M.S Duct at casting machine exhaust duct end with materials
3.761MT
9.5mtr
1.2mtr
4000.00
36.00
225.00
15044.00
342.00
270.00
Total AED Fifteen Thousand Six Hundred and Fifty Six Only 15656.00
Terms & Conditions: 1. Materials used are as mentioned above 2. Fabrication and supply as per your drawing. . 3. Work will be completed within 2 weeks after receipt of your P.O. 4. Payment:Immediate after delivery 5. Payments to be made to our A/C # 0032635844001 with Sharjah Islamic Bank Thanking You
For Aarya Engineering FZC
R.Krishnamurthy050-9743110
QUOTATION
ToTHE COMMERCIAL MGR/OPERATION HEADFUJAIRAH GOLD FZEP.O. BOX:3992, FUJAIRAH FREE ZONEFUJAIRAHPH:09-2282533, FAX:09-2282454
Quote Ref. No: R.V/1432/10
Date: 06.07.2010
No. of pages: 01
Dear Sir, Thank you very much for your enquiry& we are pleased to quote you our best price for for the following items:
S. No Description QTY Rate/Unit Total Price(AED)
1
2
Fabrication, supply and erection of shed to shaft furnace charging area size 11mtr Lx9mtr Wx6mtr H. The shed side beams are used with 125x65mm 1-Beam 3nos each 11 mtr length and cross supports will be fixed with 40x40x2mm M.S tube on every 1mtr distance. End vertical columns used with 3’’ G.I schedule 40 pipe 3nos on every 3mtr distance. The roof is covered with G.I powder coated single skin roofing profile sheet. The total area is 108sq. mtr.
Removing of existing main gate door, and bottom sliding rail and fabrication of new sliding rail on 100x50 I-Beam topside welded by new and fabrication of door topside brackets with new rollers. Fabrication and installing new small door 2mtr Hx1mtr W in the main door to enter people.
01 set
01 set
11500.00
2000.00
11500.00
2000.00
Total AED Thirteen Thousand Five Hundred Only 13500.00 Terms & Conditions: 1. Materials used are as mentioned above 2. Fabrication and supply as per your drawing. . 3. Work will be completed within 2 weeks after receipt of your P.O. 4. Payment:Immediate after delivery 5. Payments to be made to our A/C # 0032635844001 with Sharjah Islamic Bank Thanking YouFor Aarya Engineering FZC
R.Krishnamurthy050-9743110
QUOTATION
ToTHE COMMERCIAL MGR/OPERATION HEADFUJAIRAH GOLD FZEP.O. BOX:3992, FUJAIRAH FREE ZONEFUJAIRAHPH:09-2282533, FAX:09-2282454
Quote Ref. No: R.V/1433/10
Date: 07.07.2010
No. of pages: 01
Dear Sir, Thank you very much for your enquiry& we are pleased to quote you our best price for for the following items:
S. No Description QTY Rate/Unit Total Price(AED)
1
2
3
4
Fabrication, machining and supply of copper holding furnace damper control assembly as per your drawing F62-7-2, F63-7-3, F62-7-4, F-38-7-1, F38-7-5, F38-7-7, F38-7-8 & F38-7-9.
Taking materials from Fujairah Gold and returning back after machining of casting machine pressing wheel as per the dimension given in the drawing.
Fixing of 20mm thick plate in charging bucket bottom side with complete welding. Size 1400x70x20mm
Supply of technician on hourly basis for pickling line modification.
01 set
01 set
01 set
24 Hrs
6775.00
625.00
1500.00
20.00
6775.00
625.00
1500.00
480.00
Total AED Nine Thousand Three Hundred and Eighty Only 9380.00 Terms & Conditions: 1. Materials used are as mentioned above 2. Fabrication and supply as per your drawing. . 3. Work will be completed within 2 weeks after receipt of your P.O. 4. Payment:Immediate after delivery 5. Payments to be made to our A/C # 0032635844001 with Sharjah Islamic Bank Thanking YouFor Aarya Engineering FZC
R.Krishnamurthy050-9743110
QUOTATION
ToTHE COMMERCIAL MGR/OPERATION HEADFUJAIRAH GOLD FZEP.O. BOX:3992, FUJAIRAH FREE ZONEFUJAIRAHPH:09-2282533, FAX:09-2282454
Quote Ref. No: R.V/1434/10
Date: 20.07.2010
No. of pages: 01
Dear Sir, Thank you very much for your enquiry& we are pleased to quote you our best price for for the following items:
S. No Description QTY Rate/Unit Total Price(AED)
1
2
3
4
5
6
Fabrication & erection of upper launder slack removal door with 1 ton capacity hand witch hoist @ 2 pulley block system’ door fabrication without material
Hoist structure 2 pully bearing machining & erection with hand winch
Plat form fabrication & erection shaft furnace area with handrail without material
Plat form fabrication & erection shaft furnace area with handrail with our material
Upper launder top side plat form erection without material
Air compressor strainer filter fabrication & supply
100 Kgs
01 Set
66 Kgs
66.5 Kgs
151 Kgs
06 Nos
400.00
4350.00
264.00
532.00
604.00
50.00
400.00
4350.00
264.00
532.00
604.00
300.00
Total AED Six Thousand Four Hundred and Fifty Only 6450.00 Terms & Conditions: 1. Materials used are as mentioned above 2. Fabrication and supply as per your drawing. . 3. Work will be completed within 2 weeks after receipt of your P.O. 4. Payment:Immediate after delivery 5. Payments to be made to our A/C # 0032635844001 with Sharjah Islamic Bank Thanking YouFor Aarya Engineering FZC
R.Krishnamurthy050-9743110
QUOTATION
ToTHE COMMERCIAL MGR/OPERATION HEADFUJAIRAH GOLD FZEP.O. BOX:3992, FUJAIRAH FREE ZONEFUJAIRAHPH:09-2282533, FAX:09-2282454
Quote Ref. No: R.V/1435/10
Date: 01.08.2010
No. of pages: 01
Dear Sir, Thank you very much for your enquiry& we are pleased to quote you our best price for for the following items:
S. No Description QTY Rate/Unit Total Price(AED)
1 Roughing machine roller sand blasting 18 75.00 1350.00
Total AED One Thousand Three Hundred and Fifty Only 1350.00 Terms & Conditions: 1. Materials used are as mentioned above 2. Fabrication and supply as per your drawing. . 3. Work will be completed within 2 weeks after receipt of your P.O. 4. Payment:Immediate after delivery 5. Payments to be made to our A/C # 0032635844001 with Sharjah Islamic Bank Thanking YouFor Aarya Engineering FZC
R.Krishnamurthy050-9743110
QUOTATION
ToMr. Abdulquddus Lutfur RahmanM/S Prominent Juffali FZCSAIF Zone, Sharjah, U.A.EPH:06-5572626, FAX:06-5572226
Quote Ref. No: R.V/1436/10
Date: 05.09.2010
No. of pages: 01
Dear Sir, Thank you very much for your enquiry& we are pleased to quote you our best price for for the following items:
S. No Description QTY Rate/Unit Total Price(AED)
1 Fabrication and powder coating of steel skid as per your drawing no:10GA0596
01 No 1740.00 1740.00
Total AED One Thousand Seven Hundred and Forty Only 1740.00
Terms & Conditions: 1. Item will be fabricated as per your drawing 2. The M.S tube used is 40X40X4mm and MS angle 40X40X5. 3. Item will be delivered in your warehouse. 4. Delivery 5 days from the date of receipt of L.P.O 5. Payments :
Cash (or) CDC on delivery of materials.Payments to be made to our A/C # 00326358844001 with Sharjah Islamic Bank
6. This quote is valid for 1 week only. Thanking You
For Aarya Engineering FZC
R.Krishnamurthy
050-9743110
Mr.RASBIHARI YADAVJawainiya,Patna,India.
Subject: Appointment
Dear Mr. RASBIHARI YADAV
This in reference to your application for employment with us. We pleased to offer you’re the position of “Machinist” as per the following terms and conditions:
1. Position: Turner.2. Reporting to foreman,3. Salary Package : Basic (1400) + Food Allowance (350) = Total AED 1,7504. Accommodation: The Company shall provide sharing bachelor accommodation.5. Probation: Six months from the date of Joining.6. Annual Leave: 30 days with salary for every completed year of service. Return air tickets to India once
in two years shall be provided.7. Gratuity & Medical as per law.8. Duties & Responsibilities: Receives drawing from the foreman Observes machine operation to verify accuracy of machine settings. Prepares one sample component for Inspection by QC. Carries out production after obtaining QC
approval. Marks identification and traceability in all components. Returns the balance material if any after marking traceability to store. Clean and maintains machine, tooling and parts to maintain equipment in optimal production condition. Clean and maintain work area. Does any other job assigned from time to time.
Does any other work entrusted from time to time by the management.
Termination of contract: Three months notice period is required, if the employee wants to leave the company/Job.
NOTE: As per company policy Smoking at work spot, accommodation etc., is not allowed.
Regards,
For Aarya Engineering FZC,
Managing Director
QUOTATION
ToMr. SETHU MADHAVANM/S GULF GAS PIPELINES INSTALLATIONSSHARJAH, U.A.EPH:06-5388641, FAX:06-5634026
Quote Ref. No: R.V/1448/10
Date: 20.09.2010
No. of pages: 01
Dear Sir, Thank you very much for your enquiry& we are pleased to quote you our best price for for the following items:
S. No Description QTY Rate/Unit Total Price(AED)
1 Sand blasting & removing of existing paint from LPG tank of 1000ltr
Tank will be painted with light green epoxy paint
01 950.00 950.00
Total AED Nine Hundred and Fifty Only 950.00
Terms & Conditions: 1. Tank should be delivered to our workshop in your truck & should be collected from us after completion of work. 2. Delivery 4 days from the date of receipt of material. 3. Payments :
Cash on delivery of materials. 4. This quote is valid for 1 week only. Thanking You
For Aarya Engineering FZC
R.Krishnamurthy050-9743110
QUOTATION
ToM/S WEIR VALVES & CONTROLS SHARJAH, U.A.EPH:04-8836396, FAX:04-8836126
Quote Ref. No: R.V/1500/10
Date: 03.11.2010
No. of pages: 01
Dear Sir, Thank you very much for your enquiry& we are pleased to quote you our best price for for the following items:
S. No Description Qty Rate/Unit Total Price(AED)
1 SS 316 organ welding 03 Nos 150.00 450.00
Total AED Four hundred and fifty only. 450.00
Terms & Conditions: 1. Payments :
Cash on delivery of materials. 2. This quote is valid for 1 week only.
QUOTATION
ToM/S NATIONAL CABLES INDUSTRYP.O. BOX: 27472, SHARJAH, U.A.EPH:06-5311888, FAX:06-5311577
Quote Ref. No: R.V/1501/10
Date: 03.11.2010
No. of pages: 01
Dear Sir, Thank you very much for your enquiry& we are pleased to quote you our best price for for the following items:
S. No Description Qty Rate/Unit Total Price(AED)
1
2
3
Breaker Plate
Small tube guider(13.17; 13.22; 15.50; 20.4523.70; 25.05; 7.35; 21.7517.95; 22.10) dia
Medium tube guider (41.25) dia
02 Nos
10 Nos
01 No
2125.00
475.00
450.00
4250.00
4750.00
450.00
Total AED Nine thousand four hundred and fifty only 9450.00
Terms & Conditions: 1. Payments : Advance 50% Balance after delivery 2. This quote is valid for 1 week only. 3. Final delivery will be 15 days from L.P.O. date 4. Material D2 material 5. Heat treatment in our scope
QUOTATION
ToM/S WEIR VALVES & CONTROLS SHARJAH, U.A.EPH:04-8836396, FAX:04-8836126
Quote Ref. No: R.V/1503/10
Date: 04.11.2010
No. of pages: 01
Dear Sir, Thank you very much for your enquiry& we are pleased to quote you our best price for for the following items:
S. No Description Qty Rate/Unit Total Price(AED)
1 4’’ Valve bar body surface area both side organ welding 7018
02 Nos 250.00 500.00
Total AED Five Hundred Only 500.00
Terms & Conditions: 1. Payments :
Cash on delivery of materials. 2. This quote is valid for 1 week only.