quoinplqn...quoin foot specifications quoin raised storage feet are nominally 3’’ high with...

58
Price List June 2020 Quoin

Upload: others

Post on 17-Jul-2020

4 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

PLTEMP0320 © Knoll, Inc. All rights reserved.Printed in the United States on paper that contains

50% recycled content and 15% post consumer waste.

Knoll, Inc.P.O. Box 1571235 Water StreetEast Greenville, PA 18041

knoll.com

Quoin P

rice List June 2020

Price ListJune 2020

Quoin

Page 2: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

Table of Contents

Introduction Knoll and Sustainable Design 2Quoin Finish Selections 3KnollTextiles and Spineybeck Leather Approvals 4

Raised Storage Quoin Foot Specifications 5Foot Kits 6

Pedestals Mobile Pedestal Specifications 7Mobile Pedestals 8Mobile Pedestals Accessories 12

Credenzas Credenza Specifications 14Credenzas 16Credenza Accessories 18

Lockers Locker Specifications 20Desk Supporting Lockers 22Lockers 26Locker Tops 40Lockers Accessories 44

Keyless Locking Digital Keypad and RFID Lock Specifications 47Keyless Locking Accessories 49

Selling Policy 54

KnollKey Lock Program 56

General Ordering Information 57

Quoin

PLQN08201

Copyright � 2020 Knoll, Inc.All rights reserved.All prices effective 03/15/20.

Page 3: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

Knoll and Sustainable Design

Each year Knoll sets key initiatives in the journey to sustainability. Focused on our impact to people and planet, Knoll reports materialhealth product attributes and sets operational targets to reduce greenhouse gas emissions, waste generation and water use (in our NorthAmerican facilities.)

Material transparency is a core Knoll sustainable design value, enabling us to optimize the design and performance of our products.Our material health program utilizes independent third-party certifications that provide an impartial and trustworthy foundation forindustry-wide transparency. Certification by respected third parties ensures that all manufacturers are held to the same high standards.Knoll certifications include: Forest Stewardship Council (FSC�), Intertek’s Clean Air Program, Business and Institutional FurnitureManufacturer’s Association (BIFMA) LEVEL� certification, International Living Future Institute’s (ILFI) Declare labelling and CertifiedEnvironmental Product Declarations. In addition, Knoll is aligned with the U.S. Green Building Council and can help organizationsachieve credits for Leadership in Energy and Environmental Design (LEED�), WELL and the Living Building Challenge (LBC) buildingcertifications.

In our manufacturing operations, we focus on efficiency and impact. Knoll Office and Knoll Europe manufacturing locations are ISO14001:2015 certified. Knoll sets objectives and targets to reduce energy, water and waste. These initiatives are part of a long-termstrategy to further reduce energy consumption and lower our carbon footprint.

We also believe in helping our customers find viable options when decommissioning furniture or other related assets. ANEW’s FullCircle Program, in partnership with Knoll, allows customers to leverage buy-back and re-sale programs as well as explore options forrepurposing or recycling that mitigate landfill impact through energy-from-waste conversion.

For more information about Knoll and sustainable design, visit www.knoll.com/environment.

2

Page 4: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

Quoin Finish Selections

Knoll Color Program

Core Paint Finishes

P1 Paint Finishes111 Jet Black112 Brown113 Dark Grey114 Folkstone Grey115 Medium Grey116 SandStone117 Soft Grey118 Bright White120 Black Brown

P1 Textured Paint Finishes111T Textured Jet Black112T Textured Brown113T Textured Dark Grey114T Textured Folkstone Grey115T Textured Medium Grey116T Textured SandStone117T Textured Soft Grey118T Textured Bright White120T Textured Black Brown

P2 Paint Finishes611 Beige Mist Metallic612 Medium Metallic Grey

P2 Textured Paint Finishes611T Textured Beige Mist

Metallic612T Textured Medium Metallic

Grey

P3 Paint Finishes613 Silver

Pull Finishes

Core Paints111 Jet Black112 Brown113 Dark Grey114 Folkstone Grey115 Medium Grey116 Sandstone117 Soft Grey118 Bright White120 Black Brown611 Beige Mist Metallic612 Medium Metallic Grey613 Silver

Accent Paints130 Dark Red131 Slate Blue132 Olive Green133 Canary Yellow134 Knoll Red

AnodizedAA Anodized AluminumAN Anodized Nickel

Foot Finishes111T Textured Jet Black114T Textured Folkstone Grey115T Textured Medium Grey118T Textured Bright White613T Textured Silver

Cylinder Lock FinishesC ChromeB Black

Digital Keypad and RFID LockFinishesNO Brushed Nickel

ColorAll inside and outside case surfacesare painted in the same specifiedpaint color.

Custom Color PolicyFor all colors outside the standardpalettes for Quoin storage as definedwithin this price list, Knoll willcustom match your specification.Please submit the request usingKnoll’s Custom Finish Planneravailable on Dealer Portal.

Custom colors will be processed at aP2 list price for finishes that are notmetallic, clear or white. Metallic,clear and white finishes will beprocessed at a P3 list price.

Extended lead times may apply tocustom paint match selections.

Laminate Finishes

* denotes melamine finishL1 - Solid Colors114* Folkstone Grey117* Soft Grey118* Bright White119* Pumice

L2 - Solid Colors111* Jet Black115* Medium Grey128* Fog

L2 - Patterned121 Micro Grey

114 edge band122 Brushed Sand

119 edge band123 Brushed Grey

128 edge band129 Micro Sand

119 edge band

L2 -Wood Grain124* Medium Cherry125* Natural Maple126* Natural Cherry127* Walnut139* Light Ash140* Warm Ash141* Whitened Ash142* Grey Ash143* Classic Oak144* Graphite Pear145 Zebra147* Silverwood148* Smokewood149* Barnwood

Quoin

3

Page 5: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

KnollTextiles and Spineybeck Leather Approvals

Approved textiles for Quoin MobilePedestal Cushion

Abacus fAegeanAlignmentAll StarAlter EgoArberArno fArrondissementAswanAtelierAtlasAxiom �fr

BackdropBaxterBeaconBelizeBiota fBiscayneBistro fBocce fBoundary fBrigadoon f�fr

CairoCameoCatoCatwalkCenturyChain LinkChanceCharmChiseledChroma fChronicle fCircaClassic Boucle fCleoClose KnitColor FieldCommon Ground fCommuter Cloth fCompass CRComaroCoterieCrossroadCuddle StripeDahlia CRDay TripperDeliteDemureDivaDjenneDouble Agent �fr

DuneDurandDynamicEarthwork fEclat WeaveElement

EntouragefEssenceFerryFibraFireflyForza �fr

Fox Trot CRGalla II fGibsonGliderGrandeGrandviewGreenwichGroovyHarrisonHazeHeavy MetalHeliosHighlandHolbrookHologramHourglassHudsonIconIn StitchesInnuendoIslandJasmineJourneyfJubileeJunoKabukiKampalaKatazomeKaya CRKeatonKimonoKingstonKnoll Felt fKnoll Hopsack fKora CRLagosLegend CRLibertyLimaniLittle DevilLore CRLudlowLyricMagnoliaMarinerMarqueeMasqueradeMelangeMelody �fr

MenagerieMeroeMidpointMilestoneMod PlaidModern Tweed

Monarch fNature WalkNight LifeNobleNorth IslandObiOh La LaOriginsOverture fPalisadePanache CRParadigmPedal Pusher �fr

Petite FloralPlaidtasticPogoPrairie �fr

PrepfPresto fPrim fPrince HairyPullmanQuarkRadianceRansom fReflectRegard CRRivingtonRoamRush HourSaharaSandpiper CRSashikoSequin CRSerendipitySeuratShermanSidelineSinclairSmart �fr

SoireefSoliloquySonnet fSoonSpark fSpencerSpree fStacksSpectatorStepping StonesStretch AppealStriae StripeStripemaniaSummitSuttonfSwankSwingSynth fTabloid fTheory �fr

Tight Rope �fr

Tilden �fr

Tinge �fr

TopographyTotemTower GridTreble CRTrophyTrystUltrasuede fUni-FormUtmostUtrilloVateraVenueVersa fVersatilityVibe II �fr

Vinyl �fr

WestwoodWhipWild ThingWitWoodlandWorld PieceYeniZari CRZen WaveZiplineZoom

Pedestal cushions are upholstered(from the front to the back of thepedestal) with the fabric directionmatching the textile sample.

Aproved Spinneybeck Leathers forQuoin Mobile Pedestal Cushions

AlaskaAmazonAndesArizonaCervoCopenhagenCordovanDerbyDistressedDucaleDucale VeloursEspanaMaremmaMarissaPrimaRivaSabrinaSaddleSalonVelluto PelleVolo

f = CAL 133 Pre-approved �fr Fire Retardants Chemicals

Quoin

4

Page 6: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

Quoin Foot Specifications

Quoin Raised Storage

Feet are nominally 3’’ high with black levelingglide. Foot kits are specified separately as kitsand installed on-site.

Feet are available only for products as statedin the application notes on the pricing pagesand within this section.

ApplicationQuoin storage units raised on feet may be usedfreestanding or ganged to panels or adjacentstorage units as noted within applicable pricingsections.

When used freestanding, counterweights organging may be required. Refer to applicablecounterweight specification information fordetails.

Components of uniformed depth may be gangedto one another via T-Feet. Components ofdiffering depths may not utilize shared T-Feet forganging.

When ganging two units together, (4) Corner Feetwill be replaced by (2) T-Feet spanning the seambetween the units.

Individual Units, 8 Corner Feet

Ganged Units, 4 Corner Feet + 2 T-Feet

Corner Feet are available in a 4-piece kit or as40-piece bulk kits. T-Feet are available in a2-piece kit or as 20-piece bulk kits. Hardware isincluded to attach to storage unit.

CredenzasTo specify Quoin credenzas raised on feet, utilizestandard credenza pattern numbers (V2G22 . .).Credenzas include pre-installed leveling glides tobe removed on-site when utilizing foot kits.

Feet are additive to the height of a standardcredenza. Overall height of a credenza raised onfeet is 25.5� high.

Individual units 18�-36� wide require (4) CornerFeet per unit. Double credenzas 36�-72� widerequire (4) Corner Feet and (2) T-Feet foradditional support.

LockersLockers for use with Feet (VLF . .) do not includepre-installed leveling glides. Applicable foot kitsmust be specified for use.

Foot kits may not be used with (VLG . .) patternnumbers.

Noted elevation heights of Lockers for Use withFeet include height of 3’’ feet. Case height ofLockers for Use with Feet is 3’’ less than Lockerswith standard leveling glides to accommodateheight of foot.

Quoin

5

Page 7: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

Foot Kits

description type pattern no. list

Foot Kit, Corner Corner foot kit, 4 pieces VAFC04P $118.Corner foot kit, bulk 40 pieces VAFC40P 1,105.

Foot Kit, T T foot kit, 2 pieces VAFT02P 79.T foot kit, bulk 20 pieces VAFT20P 716.

Order Information

1. Base Pattern Number2. Paint Finish

See Finish Options page

Order Code

Example: VAFC04P

VA Quoin, AccessoryF Foot KitC Corner04 Kit of 4P Painted

Specification Information

Foot kits are specified separately askits and installed on site. Kitsinclude hardware for attaching feetto Quoin storage unit.

Individual lockers or singlecredenzas require 4 corner feet.Double credenzas additionallyrequire 2 T-feet for ganging andsupport.

When ganging two unitsside-by-side, units must be ofuniformed depth. Two individualganged units require 4 corner feetplus 2 T-feet at the seam.

Application Notes

Feet are nominally 3� high andinclude a black leveling glide.

Feet are additive to the height of astandard credenza bringing theoverall finished height of thecredenza on feet to 25.5� high(nominal).

Lockers for use with feet (VLF..pattern numbers) feature a shortercase to compensate for height of feetmaintaining overall elevation heightas noted.

Foot kits are only compatible withQuoin Credenzas (V2G..) andLockers For Use with Feet (VLF..)

Quoin

6

Page 8: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

Mobile Pedestal Specifications

Quoin Mobile PedestalsQuoin mobile pedestals offer 3 configurations ofmoveable storage available in 2 widths and 2depths. Pedestal cases are preassembled and shipwith drawers installed. Casters are field installed.

3 configurations available:Open with ShelfFull DoorBox/File

Mobile pedestals feature full overlay door ordrawer fronts and casters. Pedestals are availablewith steel or cushion top. All mobile pedestalsinclude 2 locking and 2 non-locking casters.Pedestals with drawers include additionalnon-locking caster mounted beneath file drawerfor added stability as drawer is extended.

Available SizesNominal Sizes (actual dimension)Height: 20� (19.91�)Width: 12� (11.93�), 15� (14.9�)Depths: 18�, 24� (18.78�, 23.2�)When specified, cushion top adds 1� to overallpedestal height.

Drawers and FilingEach Box/File pedestal contains one 6� high boxdrawer and one 12� high file drawer. File drawerincludes file bar hardware to accommodateside-to-side Letter or Legal filing. Side-to-sidefiling hangs from back edge of drawer bodyproviding clearance for storage of other smallitems or supplies within front section of drawer.15� wide pedestals also accommodatefront-to-back Letter filing. 12� wide pedestals donot accommodate front-to-back filing.

Box Drawer, Internal DimensionsWidth: 9-5/16�, 12�Height: 4-7/16�Depth: 16-5/16�, 21-3/16�

File Drawer, Internal DimensionsWidth: 9-5/16�, 12�Height: 9-1/4�Depth: 16-5/16�, 21-3/16�

ConstructionQuoin mobile pedestals feature an innovative1-piece wrapper design consistent with QuoinLockers, providing optimal material efficiencywithout sacrificing strength and durability.• Wrapper: 20-gauge steel• Front vertical channel: 16-gauge steel• Base: 16-gauge steel• Top Support Crossrail: 16-gauge steel• Finished Steel Top: 14-gauge steel• Drawer Fronts: 20-gauge steel• Drawer Bodies: 20 and 22-gauge steel• Full extension, ball bearing drawer slides• Door: 20 and 22-gauge steel• Removable shelf: 20-gauge steel• Cantilever shelf support: 16-gauge steel

LocksQuoin mobile pedestals may be orderednon-locking or locking with cylinder lock and key.Lock drilling is omitted when specified asnon-locking. Pedeatals feature slim profile lockbezel to match specified lock core finish, availablein black or chrome.

Locks are randomly keyed unless otherwisespecified. Other keying options include keyedalike or keyed with lock cored K001-K250. Tospecify units as such, reference KnollKey LockProgram.

PullsQuoin standard 5� finger pull is factory installed;positioned horizontally 3/8� from top of drawerfronts. Pull is positioned vertically 1� below topedge of door for pedestals with full door.

ShelvesOpen Pedestals include (1) removable shelf and 2supporting cantilevers. Full door pedestals do notinclude a shelf.

CushionsMobile pedestals may be specified without afinished top for use with field installed cushion top(specified separately). Cushion top may not beapplied to mobile pedestals with finished steeltop. Cushions are available in a range ofKnollTextiles, Spinneybeck leather or upholsteredin customer’s own material. When specified,cushion top adds 1� to overall pedestal height

PlanningQuoin mobile pedestals are designed to plan withall other Knoll Office products including heightadjustable tables.

Casters provide adequate clearance to roll overtopTone or k.stand height adjustable table foot forenhanced planning efficiency. Refer to tableclearance requirements when planning Quoinpedestals beneath height adjustable tables.

Quoin

7

Page 9: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

Mobile Pedestals12� Wide, with Steel Top

description configuration height width depth pattern number P1 P2 P3

Open with shelf, 12� wide, steel top Open 1915/16� 12� 1813/16� VPM201218OSS $590. $620. $649.Open 1915/16� 12� 231/4� VPM201224OSS 610. 641. 671.

Full Door, 12� wide, steel top Full Door, Left 1915/16� 12� 1813/16� VPM201218FDLSSL 720. 756. 792.Full Door, Left 1915/16� 12� 231/4� VPM201224FDLSSL 740. 777. 814.Full Door, Right 1915/16� 12� 1813/16� VPM201218FDRSSL 720. 756. 792.Full Door, Right 1915/16� 12� 231/4� VPM201224FDRSSL 740. 777. 814.

Box/File, 12� wide, steel top Box/File 1915/16� 12� 1813/16� VPM201218BFSSL 820. 861. 902.Box/File 1915/16� 12� 231/4� VPM201224BFSSL 840. 882. 924.

Order Information

1. Base Pattern Number2. Lock option

L = Cylinder LockN = Non-locking

3. Case FinishSee Finish Options page

4. Front FinishSee Finish Options page

5. Caster TypeH = Hard Casters

6. Pull typeT = 5� Finger pull

7. Pull finishSee Finish Options page

8. Lock finishB = BlackC = Chrome

Order Code

Example: VPM201218BFSSL

VPM Quoin, Pedestal Mobile20 20� High12 12� Wide18 18� DeepBF Box / FileS Steel TopS Steel Front(L) Cylinder Lock(118) Case Finish, Bright

White(~) Front Finish, same as

CaseH Hard Casters(T) Pull Style, 5� Finger Pull(118) Pull Finish, Bright

White(C) Lock Finish, Chrome

Specific Information

Mobile pedestals with steel top arenot intended for use as a seat. Ifseated use is required, specifypedestal without top and fieldinstalled cushion top. Steel top isfactory-installed.

Door or drawer front finish may bespecified as ‘‘same as case’’ or in acontrasting P1, P2 or P3 paintfinish. When contrasting front finishis specified, list price is determinedby Case Finish price category.

Patterns listed above includestandard cylinder lock. To specify asnon-locking, substitute finalcharacter with (N), deduct $15 list.Example: VPM201218BFSSN.

Open pedestals include (1)removable steel shelf.

Pedestals with full door do notinclude shelf.

Pedestals with full door areavailable with standard or Soft Closehinge option.

Application Notes

Mobile pedestals include 4 casters(2 locking). Pedestals with drawersinclude additional non-lockingcaster mounted beneath file drawerfor added stability. Casters are fieldinstalled.

Finished Height of 20� high mobilepedestals with finished steel top aredesigned to fit beneath the followingheight adjustable tables at theirlowest position:Tone Standard Electric Rangek.stand Standard Electric Rangek.stand Extended Electric RangeTelescope Standard Electric Rangek.bench Standard Electric Rangek.bench Extended Electric Range

Casters provide adequate clearanceto roll overtop Tone or k.stand foot.

Quoin

8

Page 10: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

Mobile Pedestals12� Wide, without Finished Top

description configuration height width depth pattern number P1 P2 P3

Open with shelf, 12� wide, no top Open 1915/16� 12� 1813/16� VPM201218OSN $710. $746. $781.Open 1915/16� 12� 231/4� VPM201224OSN 730. 767. 803.

Full Door, 12� wide, no top Full Door, Left 1915/16� 12� 1813/16� VPM201218FDLNSL 910. 956. 1,001.Full Door, Left 1915/16� 12� 231/4� VPM201224FDLNSL 930. 977. 1,023.Full Door, Right 1915/16� 12� 1813/16� VPM201218FDRNSL 910. 956. 1,001.Full Door, Right 1915/16� 12� 231/4� VPM201224FDRNSL 930. 977. 1,023.

Box/File, 12� wide, no top Box/File 1915/16� 12� 1813/16� VPM201218BFNSL 850. 893. 935.Box/File 1915/16� 12� 231/4� VPM201224BFNSL 870. 914. 957.

Order Information

1. Base Pattern Number2. Lock option

L = Cylinder LockN = Non-locking

3. Case FinishSee Finish Options page

4. Front FinishSee Finish Options page

5. Caster TypeH = Hard Casters

6. Pull typeT = 5� Finger pull

7. Pull finishSee Finish Options page

8. Lock finishB = BlackC = Chrome

Order Code

Example: VPM201218BFNSL

VPM Quoin, Pedestal Mobile20 20� High12 12� Wide18 18� DeepBF Box / FileN No Finish TopS Steel Front(L) Cylinder Lock(118) Case Finish, Bright

White(~) Front Finish, same as

CaseH Hard Casters(T) Pull Style, 5� Finger Pull(118) Pull Finish, Bright

White(C) Lock Finish, Chrome

Specific Information

Quoin mobile pedestals without toprequire field installed cushion top(specified separately). Once cushionis installed mobile pedestal may beused as seated surface.

Door or drawer front finish may bespecified as ‘‘same as case’’ or in acontrasting P1, P2 or P3 paintfinish. When contrasting front finishis specified, list price is determinedby Case Finish price category.

Patterns listed above includestandard cylinder lock. To specify asnon-locking, substitute finalcharacter with (N), deduct $15 list.Example: VPM201218BFNSN.

Open pedestals include (1)removable steel shelf.

Pedestals with full door do notinclude shelf.

Pedestals with full door areavailable with standard or Soft Closehinge option.

Application Notes

Mobile pedestals include 4 casters(2 locking). Pedestals with drawersinclude additional non-lockingcaster mounted beneath file drawerfor added stability. Casters are fieldinstalled.

Finished Height of 20� high mobilepedestals with cushion top installedare designed to fit beneath thefollowing height adjustable tables attheir lowest position:Tone Standard Electric Rangek.stand Standard Electric Rangek.stand Extended Electric RangeTelescope Standard Electric Rangek.bench Standard Electric Range

Casters provide adequate clearanceto roll overtop Tone or k.stand foot.

Quoin

9

Page 11: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

Mobile Pedestals15� Wide, with Steel Top

description configuration height width depth pattern number P1 P2 P3

Open with shelf, 15� wide, steel top Open 1915/16� 15� 1813/16� VPM201518OSS $640. $670. $699.Open 1915/16� 15� 231/4� VPM201524OSS 660. 691. 721.

Full Door, 15� wide, steel top Full Door, Left 1915/16� 15� 1813/16� VPM201518FDLSSL 770. 806. 842.Full Door, Left 1915/16� 15� 231/4� VPM201524FDLSSL 790. 827. 864.Full Door, Right 1915/16� 15� 1813/16� VPM201518FDRSSL 770. 806. 842.Full Door, Right 1915/16� 15� 231/4� VPM201524FDRSSL 790. 827. 864.

Box/File, 15� wide, steel top Box/File 1915/16� 15� 1813/16� VPM201518BFSSL 870. 911. 952.Box/File 1915/16� 15� 231/4� VPM201524BFSSL 890. 932. 974.

Order Information

1. Base Pattern Number2. Lock option

L = Cylinder LockN = Non-locking

3. Case FinishSee Finish Options page

4. Front FinishSee Finish Options page

5. Caster TypeH = Hard Casters

6. Pull typeT = 5� Finger pull

7. Pull finishSee Finish Options page

8. Lock finishB = BlackC = Chrome

Order Code

Example: VPM201218BFSSL

VPM Quoin, Pedestal Mobile20 20� High15 15� Wide18 18� DeepBF Box / FileS Steel TopS Steel Front(L) Cylinder Lock(118) Case Finish, Bright

White(~) Front Finish, same as

CaseH Hard Casters(T) Pull Style, 5� Finger Pull(118) Pull Finish, Bright

White(C) Lock Finish, Chrome

Specific Information

Mobile pedestals with steel top arenot intended for use as a seat. Ifseated use is required, specifypedestal without top and fieldinstalled cushion top. Steel top isfactory-installed.

Door or drawer front finish may bespecified as ‘‘same as case’’ or in acontrasting P1, P2 or P3 paintfinish. When contrasting front finishis specified, list price is determinedby Case Finish price category.

Patterns listed above includestandard cylinder lock. To specify asnon-locking, substitute finalcharacter with (N), deduct $15 list.Example: VPM201218BFSSN.

Open pedestals include (1)removable steel shelf.

Pedestals with full door do notinclude shelf.

Pedestals with full door areavailable with standard or Soft Closehinge option.

Application Notes

Mobile pedestals include 4 casters(2 locking). Pedestals with drawersinclude additional non-lockingcaster mounted beneath file drawerfor added stability. Casters are fieldinstalled.

Finished Height of 20� high mobilepedestals with finished steel top aredesigned to fit beneath the followingheight adjustable tables at theirlowest position:Tone Standard Electric Rangek.stand Standard Electric Rangek.stand Extended Electric RangeTelescope Standard Electric Rangek.bench Standard Electric Rangek.bench Extended Electric Range

Casters provide adequate clearanceto roll overtop Tone or k.stand foot.

Quoin

10

Page 12: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

Mobile Pedestals15� Wide, without Finished Top

description configuration height width depth pattern number P1 P2 P3

Open with shelf, 15� wide, no top Open 1915/16� 15� 1813/16� VPM201518OSN $760. $798. $836.Open 1915/16� 15� 231/4� VPM201524OSN 780. 819. 858.

Box/File, 15� wide, no top Box/File 1915/16� 15� 1813/16� VPM201518BFNSL 900. 945. 990.Box/File 1915/16� 15� 231/4� VPM201524BFNSL 920. 966. 1,012.

Full Door, 15� wide, no top Full Door, Left 1915/16� 15� 1813/16� VPM201518FDLNSL 960. 1,008. 1,056.Full Door, Left 1915/16� 15� 231/4� VPM201524FDLNSL 980. 1,029. 1,078.Full Door, Right 1915/16� 15� 1813/16� VPM201518FDRNSL 960. 1,008. 1,056.Full Door, Right 1915/16� 15� 231/4� VPM201524FDRNSL 980. 1,029. 1,078.

Order Information

1. Base Pattern Number2. Lock option

L = Cylinder LockN = Non-locking

3. Case FinishSee Finish Options page

4. Front FinishSee Finish Options page

5. Caster TypeH = Hard Casters

6. Pull typeT = 5� Finger pull

7. Pull finishSee Finish Options page

8. Lock finishB = BlackC = Chrome

Order Code

Example: VPM201518BFNSL

VPM Quoin, Pedestal Mobile20 20� High15 15� Wide18 18� DeepBF Box / FileN No Finish TopS Steel Front(L) Cylinder Lock(118) Case Finish, Bright

White(~) Front Finish, same as

CaseH Hard Casters(T) Pull Style, 5� Finger Pull(118) Pull Finish, Bright

White(C) Lock Finish, Chrome

Specific Information

Quoin mobile pedestals without toprequire field installed cushion top(specified separately). Once cushionis installed mobile pedestal may beused as seated surface.

Door or drawer front finish may bespecified as ‘‘same as case’’ or in acontrasting P1, P2 or P3 paintfinish. When contrasting front finishis specified, list price is determinedby Case Finish price category.

Patterns listed above includestandard cylinder lock. To specify asnon-locking, substitute finalcharacter with (N), deduct $15 list.Example: VPM201218BFNSN.

Open pedestals include (1)removable steel shelf.

Pedestals with full door do notinclude shelf.

Pedestals with full door areavailable with standard or Soft Closehinge option.

Application Notes

Mobile pedestals include 4 casters(2 locking). Pedestals with drawersinclude additional non-lockingcaster mounted beneath file drawerfor added stability. Casters are fieldinstalled.

Finished Height of 20� high mobilepedestals with cushion top installedare designed to fit beneath thefollowing height adjustable tables attheir lowest position:Tone Standard Electric Rangek.stand Standard Electric Rangek.stand Extended Electric RangeTelescope Standard Electric Rangek.bench Standard Electric Range

Casters provide adequate clearanceto roll overtop Tone or k.stand foot.

Quoin

11

Page 13: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

Mobile Pedestals AccessoriesCushion Top, Fabric

description type w d h pattern no. A B (COM) C D E F G H I

Pedestal Cushion, 12� wide For Mobile Pedestal 12� 1813/16� 1� VPMC1218 $230. $257. $302. $316. $347. $377. $417. $460. $476.For Mobile Pedestal 12� 231/4� 1� VPMC1224 280. 313. 368. 385. 423. 459. 508. 561. 581.

Pedestal Cushion, 15� wide For Mobile Pedestal 15� 1813/16� 1� VPMC1518 230. 257. 302. 316. 347. 377. 417. 460. 476.For Mobile Pedestal 15� 231/4� 1� VPMC1524 280. 313. 368. 385. 423. 459. 508. 561. 581.

Ordering Information

Seat Cushions

1. Base Pattern Number2. Textile Type3. Textile Finish

Order Code

Example: VPMC1218

VPM Quoin, Pedestal MobileC Cushion Top12 12� wide18 18� deep(~) Standard(K448) Common Ground

Specification Information

For use with Quoin mobile pedestalswithout finished top only. Cushionsmay not be applied to Quoin mobilepedestals specified with finishedsteel top.

Application Notes

Pedestal cushion includes hardwareto attach to Quoin mobile pedestalwithout finished top. Cushions arefield installed.

For CAL133 backing on thecushion, add $79 to the list price.

Use Grade B pricing for COM.

For Customer’s Own Material,specify 0.75 yards of fabric per18�deep cushion and 0.9 yards offabric per 24� deep cushion.

Quoin

12

Page 14: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

Mobile Pedestals AccessoriesCushion Top, Leather

description type w d h pattern no. U (COL) V W X Y

Pedestal Cushion, 12� wide For Mobile Pedestal 12� 1813/16� 1� VPMC1218 $442. $531. $655. $675. $709.For Mobile Pedestal 12� 231/4� 1� VPMC1224 563. 672. 830. 870. 918.

Pedestal Cushion, 15� wide For Mobile Pedestal 15� 1813/16� 1� VPMC1518 442. 531. 655. 675. 709.For Mobile Pedestal 15� 231/4� 1� VPMC1524 563. 672. 830. 870. 918.

Ordering Information

Seat Cushions

1. Base Pattern Number2. Textile Type3. Textile Finish

Order Code

Example: VPMC1218

VPM Quoin, Pedestal MobileC Cushion Top12 12� wide18 18� deep(~) Standard(VO) Volo

Specification Information

For use with Quoin mobile pedestalswithout finished top only. Cushionsmay not be applied to Quoin mobilepedestals specified with finishedsteel top.

Application Notes

Pedestal cushion includes hardwareto attach to Quoin mobile pedestalwithout finished top. Cushions arefield installed.

For perforated leather, add $105 tothe list price.

Use Grade U pricing for customer’sown leather. Specify 11.5 squarefeet of material per 18� deepcushions and 14.5 square feet ofmaterial per 24�deep cushion.

Quoin

13

Page 15: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

Credenza Specifications

Quoin CredenzasQuoin credenzas are nominally 22.5� high andare available in a variety of open and drawerconfigurations. Credenzas cases arepreassembled; tops are installed on site.Credenzas with more than one unit (double unitsand box/file with open) contain two preassembledcases and one common top that are assembled onsite. Five configurations are available:• Single Open• Double Open• Single Box/File• Double Box/File• Box/File with Open

Each Box/File unit contains one 6� high boxdrawer and one 12� high file drawer. File drawerallows for side-to-side letter or legal filing andfront-to-back letter filing.• Internal height: 93/4�• Internal width: 263/4� and 323/4�• Internal depth: 153/4�

Open Quoin credenzas include one adjustableshelf, standard. The Quoin credenza case featurestwo shelf positions to either align horizontallywith adjacent credenza drawer fronts or toaccommodate binder storage.

Available Sizes (Nominal)Depth: 18.75�Widths: 18�, 24�, 30�, 36�, 48�, 54�, 60�, 66�, 72�Height: 221/2�

ConstructionCredenza specifications:• Outer wrapper: 20-gauge steel• Drawer front: 20-gauge steel• Back: 20-gauge• Full extension ball bearing drawer slides• Leveling glides: 5/16� diameter steel stem with a

13/16� of height adjustment• Extended Leveling glides: 5/16� diameter steel

stem; provides 25/8� clearance when fullyextended

• Standard interlock feature prevents bothdrawers from being opened at the same time foradded stability.

LocksQuoin credenzas with drawers are availablenon-locking or locking with cylinder lock andkey. Lock drilling is omitted when specified asnon-locking.

Locks are randomly keyed unless otherwisespecified. Other keying options include keyedalike or keyed with lock cores K001-K250. Alllocks are factory-installed and can be specifiedwith black or chrome finish.

PullsQuoin standard 5� finger pull is factory installed;positioned horizontally 3/8� from top of drawerfronts.

PlanningWhen planning credenza overlaying a table foot,Extended Leveler kit may be specified separately.Confirm clearance and overall credenza heightwhen planning with height adjustable tables.

When planning credenza with VACS22PTemplate credenza spacer to support a DividendsHorizon worksurface, specify one credenzaspacer per credenza. In this application, frontleveling glides must be moved from the standardposition to the secondary location within base.Template credenza spacer may not be used withcredenzas raised on feet.

Quoin Credenzas may be planned on raised feet,see Quoin Raised Foot Specifications page fordetails.

When planning credenza in freestandingapplication, counterweight may be required. Seecredenza counterweight specifications for details.

Credenza with Standard Leveling Glides

Credenza with Extended Leveling Glides

Credenza with Foot Kit

Shelf ClearancesShelf Position 1A: 111/4�B: 61/16�

Shelf Position 2A: 1113/16�B: 57/16�

Quoin

14

Page 16: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

Credenza SpecificationsCredenza Counterweights

Credenza Counterweight ApplicationSelect Quoin credenzas require counterweight for use in freestandingapplications. Credenzas secured to a panel, supporting a worksurface with acredenza spacer or ganged back-to-back with another unit do not requirecounterweight.

Single or double open units without drawers do not require counterweight.

When required, counterweights are specified separately and are fieldinstalled.

Reference the following list of pattern numbers and correspondingcounterweight kits required for freestanding applications:

Credenza Counterweight Kit(s) RequiredV2G221818OSL . . . . . . . . . . counterweight not requiredV2G222418OSL . . . . . . . . . . counterweight not requiredV2G223018OSL . . . . . . . . . . counterweight not requiredV2G223618OSL . . . . . . . . . . counterweight not requiredV2G223618O18O18L . . . . . . counterweight not requiredV2G224218O24O18L . . . . . . counterweight not requiredV2G224818O24O24L . . . . . . counterweight not requiredV2G224818O30O18L . . . . . . counterweight not requiredV2G225418O30O24L . . . . . . counterweight not requiredV2G225418O36O18L . . . . . . counterweight not requiredV2G226018O30O30L . . . . . . counterweight not requiredV2G226018O36O24L . . . . . . counterweight not requiredV2G226618O36O30L . . . . . . counterweight not requiredV2G227218O36O36L . . . . . . counterweight not requiredV2G223018BFLSL . . . . . . . . (1) VA2CW3035V2G223618BFLSL . . . . . . . . (1) VA2CW3635V2G224818B30O18LSL . . . . (1) VA2CW3020V2G225418B30O24LSL . . . . (1) VA2CW3015V2G225418B36O18LSL . . . . (1) VA2CW3620V2G226018B30O30LSL . . . . counterweight not requiredV2G226018B36O24LSL . . . . (1) VA2CW3620V2G226618B30O36LSL . . . . counterweight not requiredV2G226618B36O30LSL . . . . counterweight not requiredV2G227218B36O36LSL . . . . counterweight not requiredV2G226018B30B30LSL . . . . (1) VA2CW3035 + (1) VA2CW3040V2G226618B36B30LSL . . . . (1) VA2CW3040 + (1) VA2CW3640V2G227218B36B36LSL . . . . (2) VA2CW3640

Quoin

15

Page 17: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

CredenzasOpen with Shelf

description width depth height pattern number L1 L2

Single Unit, Open with shelf 18� 1813/16� 221/2� V2G221818OSL $983. $994.24� 1813/16� 221/2� V2G222418OSL 995. 1,062.30� 1813/16� 221/2� V2G223018OSL 987. 1,073.36� 1813/16� 221/2� V2G223618OSL 1,040. 1,158.

Double Unit, Open with shelf 36� 1813/16� 221/2� V2G223618O18O18L 1,524. 1,628.42� 1813/16� 221/2� V2G224218O24O18L 1,593. 1,697.48� 1813/16� 221/2� V2G224818O24O24L 1,688. 1,803.48� 1813/16� 221/2� V2G224818O30O18L 1,668. 1,782.54� 1813/16� 221/2� V2G225418O30O24L 1,720. 1,851.54� 1813/16� 221/2� V2G225418O36O18L 1,740. 1,871.60� 1813/16� 221/2� V2G226018O30O30L 1,750. 1,900.60� 1813/16� 221/2� V2G226018O36O24L 1,712. 1,862.66� 1813/16� 221/2� V2G226618O36O30L 1,822. 1,983.72� 1813/16� 221/2� V2G227218O36O36L 1,856. 2,035.

Order Information

1. Base Pattern Number2. Lock option

L = Cylinder LockN = Non-locking

3. Paint FinishSee Finish Options page

4. Top LaminateSee Finish Options page

5. Pull typeT = 5� Finger pull

6. Pull finishSee Finish Options page

7. Lock finishB = BlackC = Chrome

Order Code

Example: V2G223018BFLSL

V2G Quoin, Credenza22 22.5� High30 30� Wide18 18.75� DeepBF Box / FileL Laminate TopS Steel Front(L) Cylinder Lock(118) Paint Finish, Bright

White(139) Top laminate, Light Ash(T) Pull Style, 5� Finger Pull(118) Pull Finish, Bright

White(B) Lock Finish, Black

Specific Information

Credenzas are non-handed uponspecifications. Double units may bearranged as left or right handedupon installation. Ganging hardware(provided) attaches units from theunderside, allowing units to beconverted in the future.

Credenzas include factory installedleveling glides. Leveling glides mustbe removed during installation ifinstalling with raised foot kit(specified separately).

L1/L2 pricing is based on laminatetop finish.

Application Notes

Credenzas may be used infreestanding position. Completeunits without drawers do not requirecounterweight. Units with drawersmay require counterweight infreestanding position. See credenzaSpecification Information fordetails.

Extended leveler kit may bespecified separately for credenzasoverlaying table foot.

May be used with raised foot kit(specified separately).

Each open case unit includes 1removeable shelf, field installed.

Quoin

16

Page 18: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

CredenzasBox / File

description width depth height pattern number L1 L2

Single Unit, Box/File 30� 1813/16� 221/2� V2G223018BFLSL $1,450. $1,689.36� 1813/16� 221/2� V2G223618BFLSL 1,506. 1,777.

Double Unit, Box/File + Open 48� 1813/16� 221/2� V2G224818B30O18LSL 2,129. 2,244.54� 1813/16� 221/2� V2G225418B30O24LSL 2,182. 2,316.54� 1813/16� 221/2� V2G225418B36O18LSL 2,201. 2,337.60� 1813/16� 221/2� V2G226018B30O30LSL 2,176. 2,326.60� 1813/16� 221/2� V2G226018B36O24LSL 2,289. 2,450.66� 1813/16� 221/2� V2G226618B30O36LSL 2,288. 2,449.66� 1813/16� 221/2� V2G226618B36O30LSL 2,289. 2,450.72� 1813/16� 221/2� V2G227218B36O36LSL 2,322. 2,501.

Double Unit, Box/File + Box/File 60� 1813/16� 221/2� V2G226018B30B30LSL 2,777. 2,977.66� 1813/16� 221/2� V2G226618B36B30LSL 2,923. 3,104.72� 1813/16� 221/2� V2G227218B36B36LSL 2,927. 3,157.

Order Information

1. Base Pattern Number2. Lock option

L = Cylinder LockN = Non-locking

3. Paint FinishSee Finish Options page

4. Top LaminateSee Finish Options page

5. Pull typeT = 5� Finger pull

6. Pull finishSee Finish Options page

7. Lock finishB = BlackC = Chrome

Order Code

Example: V2G223018BFLSL

V2G Quoin, Credenza22 22.5� High30 30� Wide18 18.75� DeepBF Box / FileL Laminate TopS Steel Front(L) Cylinder Lock(118) Paint Finish, Bright

White(139) Top laminate, Light Ash(T) Pull Style, 5� Finger Pull(118) Pull Finish, Bright

White(B) Lock Finish, Black

Specific Information

Credenzas are non-handed uponspecifications. Double units may bearranged as left or right handedupon installation. Ganging hardware(provided) attaches units from theunderside, allowing units to beconverted in the future.

Credenzas include factory installedleveling glides. Leveling glides mustbe removed during installation ifinstalling with raised foot kit(specified separately).

L1/L2 pricing is based on laminatetop finish.

Application Notes

Credenzas may be used infreestanding position. Completeunits without drawers do not requirecounterweight. Units with drawersmay require counterweight infreestanding position. See credenzaSpecification Information fordetails.

Extended leveler kit may bespecified separately for credenzasoverlaying table foot.

May be used with raised foot kit(specified separately).

Quoin

17

Page 19: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

Credenza Accessories

description type w d pattern no. list P1 P2 P3

Ganging Hardware Kits Ganging Hardware, Kit of 1 VA2GB01 $53.Ganging Hardware, Kit of 10 VA2GB10 179.

Extended Leveling Glides Extended Leveling Glides, 100 pieces VA2LX100 389.Extended Leveling Glides, 20 pieces VA2LX20 111.Extended Leveling Glides, 4 pieces VA2LX04 51.

Credenza Spacer Credenza spacer for Dividends Horizonworksurface

VACS22P 182. 203. 209.

Order Information

1. Base Pattern Number

Order Code

Example: VA2CW3015

VA Quoin, Accessory2GB Credenza Ganging

Bracket Kit01 Single Kit

Specific Information

Ganging brackets may be used toattach side-by-side credenzas to oneanother.

Ganging hardware attaches unitsfrom the underside allowinghandedness to be determinedon-site or converted in the future.

Credenzas each include one half ofa ganging kit, standard. Bulk kitsmay be specified separately ifadditional brackets are required.

Application Notes

Extended leveler kit may bespecified separately for unitsoverlaying table foot.

Units with drawers requirecounterweight in freestandingposition. Refer to Series 2 Overview- Series 2 Credenza section forspecifics.

Extended leveler kit may not beused with Quoin lockers.

Credenza spacer may be used tosupport one end of a DividendsHorizon worksurface. Spacer maynot be used with credenzas raisedon feet.

Quoin

18

Page 20: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

Credenza AccessoriesCounterweight Kits

description type w weight pattern no. list

Credenza Counterweight Kit for 30� wide drawerunit

30� 15 lbs VA2CW3015 $191.30� 20 lbs VA2CW3020 252.30� 25 lbs VA2CW3025 283.30� 30 lbs VA2CW3030 314.30� 35 lbs VA2CW3035 366.30� 40 lbs VA2CW3040 388.

Credenza Counterweight Kit for 36� wide drawerunit

36 15 lbs VA2CW3615 193.36 20 lbs VA2CW3620 254.36 25 lbs VA2CW3625 286.36 30 lbs VA2CW3630 317.36 35 lbs VA2CW3635 369.36 40 lbs VA2CW3640 391.

Order Information

1. Base Pattern Number

Order Code

Example: VA2CW3015

VA Quoin, Accessory2CW Credenza Counterweight

Kit30 30� wide drawer unit15 15 lbs.

Specific Information

Credenzas with drawers may requirecounterweight when used infreestanding position. Refer toQuoin Credenza Specifications toidentify the appropriate kit.

Counterweight kits are specifiedseparately and field installed.

Application Notes

Counterweight kits includemounting hardware and brackets toinstall the counterweight plates.

Counterweight plates are mountedto the back panel behind filedrawer(s) inside credenza.

Counterweight kits are specific toQuoin credenzas and may not beused for Quoin lockers.

Quoin

19

Page 21: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

Locker Specifications

Quoin LockersQuoin Lockers are 12� and 15� wide steelconstruction cabinets offered in 4 depths and 5heights.

Available Sizes (nominal)Height: 28�, 36�, 42�, 50�, 57�Width: 12�, 15�Depth: 15�, 18�, 24�, 30�

Lockers with full door include right or left fulloverlay hinged door, dual prong coat hook andone adjustable shelf. Desk supporting lockersexclude coat hook.

Open lockers without door include 1-3 factoryinstalled, adjustable shelves in quantities asnoted below.28�, 36� high: 142� high: 250� high: 357� high: 3

When specified with finished steel top, top shipsassembled with coat hook installed. Lockers shipassembled including steel top.

When specified without finished steel top,individual or common laminate top must bespecified separately. Lockers specified withouttop include appropriate top attachment hardware.No top lockers with full door, 36� high and taller,include coat hook for field installation.

Locker heights are designed to aligndimensionally with underside of DividendsHorizon panel top cap. Lockers for use with feetare designd to maintain alignment withcorresponding Dividends Horizon panel wheninstalled on raised feet (specified separately).

Select lockers require ganging or counterweightfor stability. See Locker Stability Requirementsfor details.

ConstructionQuoin lockers feature an innovative 1-piecewrapper design providing optimal materialefficiency without sacrificing strength anddurability.

•Wrapper: 20-gauge steel•Slotted vertical channel: 16-gauge steel•Base: 18-gauge steel•Support Crossrails; 16-gauge steel•Top: 20-gauge steel•Door Outer Panel: 20-gauge steel•Door Inner Panel: 22-gauge steel•Adjustable Shelves: 20-gauge steel•Cantilever Shelf Support: 14-gauge steel•Leveling glides: 3/8� diameter steel stem with1-5/16� of adjustment providing up to 1-7/8�clearance beneath locker, 4 leveling glidesincluded per locker.

Internal Clearances Internal Height:A: 121/16�B*: 121/2�C: 115/8�D: 61/4�E: 131/2�F*: 179/16�

*B and F dimension reduced by 31/4� whenspecified for use with feet (VLF pattern numbers)

Adjustable shelves ship factory installed. Lockerswith full door include one shelf installed in lowestposition.

Internal Clear Width: 105/16�, 135/16�

Actual dimensions to nearest 1/16th of an inch

Exterior DimensionsFinished Height: 343/16�, 411/2�, 483/4�, 561/16�Actual Width: 12�, 15�Actual Depth: 1513/16�, 1813/16�, 231/4�, 291/4�

Actual dimensions to nearest 1/16th of an inch

Common Laminate TopsCommon laminate tops may be specified to ganglockers in locker bank applications. Laminatetops are 15/16� thick laminate with ABS Edgeband.

Common tops are designed to span a single run ofup to 8 lockers of consistent width and depth orback-to-back locker banks of up to 16 lockers ofconsistent width and depth.

To specify locker bank application, lockers mustbe specified with ‘‘no top’’ option and appropriatenumber of locker ganging brackets must bespecified separately (VARQ01 or VARQ10), seelocker accessories for details.

Select locker banks require counterweight forstability. See Locker Stability Requirements fordetails.

Locks

Quoin lockers with full door may be ordered withor without locks. No lock hole is drilled whenspecified as non-locking.

Lock options include cylinder lock with key,digital keypad lock or RFID lock.

Cylinder locks feature flush-mount lock housingto match specified lock finish, available in blackor chrome. Cylinder locks are randomly keyedunless otherwise specified. Other keying optionsinclude keyed alike or keyed with lock coredK001-K250. To specify units as such, referenceKnollKey Lock Program.

Digital keypad and RFID lock options areavailable with brushed nickel faceplate finish.Keyless locks ship program-ready in shared usemode. Refer to Keyless Locking Specifications fordetails.

HingesStandard (S) or soft close (Q) hinges are availablefor all lockers with full door.

PullsQuoin standard 5� finger pull is factory installed;vertically positioned 1� below top edge of door.

Coat Hook and Coat RodsLockers 36�-57� high with door include factoryinstalled coat hook, centered front-to-back. Topmount coat rods are available to replace standardcoat hook within 18-30� deep lockers, see LockerAccessories for details.

Quoin

20

Page 22: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

Locker SpecificationsLocker Stability and Accessories

Locker StabilityQuoin lockers are tested per ANSI/BIFMA X5.9-2019 requirements.Select locker applications require ganging or counterweight to complywith stability requirements.

Individual LockersThe following lockers may be used freestanding without additionalstability accomodations:• All 28�, 36� and 42� high lockers• All 30� deep lockers

The following lockers require ganging or counterweight to meetstability requirements:• 50�H x 12�, 15�W x 15�, 18�, 24�D• 57�H x 12�, 15�W x 15�, 18�, 24�D

See Locker Counterweights for details

Locker BanksMost locker banks may be planned freestanding except applications asdescribed below which require counterweight or anchoring to a wall orpanel for additional stability:

• Bank of 2-4 lockers: 50�H x 12�, 15�W x 15�D• Bank of 2-4 lockers: 57�H x 12�, 15�W x 15�D• Bank of 2 lockers: 50�H x 12�, 15�W x 18�, 24�D• Bank of 2 lockers: 57�H x 12�, 15�W x 18�, 24�D

Counterweight RequirementsCounterweights are available to provide additional stability to Quoin lockers as needed. When required, counterweights are specified separately andfield installed.

Locker TypeIndividual Locker

ApplicationBank Application

2 LockersBank Application

3 LockersBank Application

4 Lockers

50�H x 12�W x 15�D GR(1) VALCW1210 +(1) VALCW1220

(1) VALCW1210 (1) VALCW1210

50�H x 12�W x 18�D (1) VALCW1223 (1) VALCW121250�H x 12�W x 24�D (1) VALCW1212

50�H x 15�W x 15�D GR(1) VALCW1513 +(1) VALCW1526

(1) VALCW1526 (1) VALCW1513

50�H x 15�W x 18�D (1) VALCW1530 (1) VALCW151550�H x 15�W x 24�D (1) VALCW1515

57�H x 12�W x 15�D GR(1) VALCW1210 +(1) VALCW1220

(1) VALCW1210 (1) VALCW1210

57�H x 12�W x 18�D (1) VALCW1223 (1) VALCW121257�H x 12�W x 24�D (1) VALCW121257�H x 15�W x 15�D GR (1) VALCW1526 (1) VALCW1526 (1) VALCW151357�H x 15�W x 18�D (1) VALCW1530 (1) VALCW151557�H x 15�W x 24�D (1) VALCW1515

GR = Ganging to a panel or wall required

Ganging KitsA variety of ganging kits are available to provide additional stability asrequired. Counterweights are not required when ganging units except inlocker bank applications as described in Counterweight Requirements chart.

All ganging kits are specified separately and field installed.Applications include:• Panel attachment brackets (VARDL01, VARDR01) secure Quoin locker to

Dividends Horizon panel.• Locker to credenza ganging kit (VARS01) secures Quoin locker to Quoin

credenza.

Dividends Horizon Panel Bracket for Quoin Locker Stability

Worksurface Mount BracketWorksurface mount brackets allow Quoin lockers to support one end of aDividends Horizon fixed height worksurface. When specified, worksurfacemount bracket replaces otherwise required support at the end of theworksurface (cantilever, support leg or similar).

Worksurface mount brackets are specified separately and field installed.Installation requires attachment through locker side panel and is intended tobe permanent. Brackets are available in all core smooth and textured paintcolors. Due to visibility of bracket within locker, it is recommended bracketfinish coordinates with specified locker case finish.

Worksurface mount bracket applications require locker and attachedworksurface to be of uniform depth.

Quoin

21

Page 23: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

Desk Supporting LockersWith Leveling Glides12� Wide

description configuration h w d pattern no. P1 P2 P3

Open with shelf, 12� wide Open Pedestal, One shelf 271/16� 12� 1513/16� VLG281215OSN $775. $814. $853.Open Pedestal, One shelf 271/16� 12� 1813/16� VLG281218OSN 815. 856. 897.Open Pedestal, One shelf 271/16� 12� 231/4� VLG281224OSN 917. 963. 1,009.Open Pedestal, One shelf 271/16� 12� 291/4� VLG281230OSN 1,045. 1,097. 1,150.

Hinged Door, 12� wide Full Door Pedestal, left hand 271/16� 12� 1513/16� VLG281215FDLNSL 960. 1,008. 1,056.Full Door Pedestal, right hand 271/16� 12� 1513/16� VLG281215FDRNSL 960. 1,008. 1,056.Full Door Pedestal, left hand 271/16� 12� 1813/16� VLG281218FDLNSL 1,000. 1,050. 1,100.Full Door Pedestal, right hand 271/16� 12� 1813/16� VLG281218FDRNSL 1,000. 1,050. 1,100.Full Door Pedestal, left hand 271/16� 12� 231/4� VLG281224FDLNSL 1,102. 1,157. 1,212.Full Door Pedestal, right hand 271/16� 12� 231/4� VLG281224FDRNSL 1,102. 1,157. 1,212.Full Door Pedestal, left hand 271/16� 12� 291/4� VLG281230FDLNSL 1,230. 1,292. 1,353.Full Door Pedestal, right hand 271/16� 12� 291/4� VLG281230FDRNSL 1,230. 1,292. 1,353.

Order Information

1. Base Pattern Number2. Lock option

D = Digital Keypad LockL = Cylinder LockN = Non-LockingR = RFID Lock

3. Paint FinishSee Finish Options page

4. Pull StyleT = 5� Finger Pull

5. Pull FinishSee Finish Option page

6. Lock Finish

Order Code

Example: VLG281524FDLNSL

VLG Quoin, Locker withGlides

28 28� High15 15� Wide24 24� DeepFDL Full Door LeftN No finished topS Steel Door(L) Cylinder Lock(118) Paint Finish, Bright

White(S) Standard Hinge(T) Pull Style, 5� Finger Pull(118) Pull Finish, Bight White(B) Lock finish, Black

Specific Information

Desk supporting lockers include 1removeable shelf.

Lockers with full door (FD) listedabove include standard cylinderlock. For additional lock options,substitute with:N = Non-Locking, deduct $15D = Digital Keypad lock, add $560R = RFID Lock, add $605Example (VLG281524FDLNSN)

Programming and Manager Key(s)are required for D or R lock types,specified separately. See DigitalKeypad and RFID lockspecifications for details.

Lockers with full door are availablewith soft close hinges. Specify Qhinge type, add $75 list.

Application Notes

Desk supporting lockers do notinclude coat hook.

Desk supporting lockers includehardware to attach to laminate top.Steel top option is not available fordesk supporting units.

Desk supporting lockers areintended to support one end of aworksurface or may be used infreestanding or bank applications.Finished height (28� nominal) alignswith standard Dividends Horizonworksurface height.

When specified non-locking, lockdrilling is omitted from door front.

Dimensions listed under ‘‘w’’, ‘‘h’’,‘‘d’’ are actual to the nearest 1/26�.

Quoin

22

Page 24: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

Desk Supporting LockersWith Leveling Glides15� wide

description configuration h w d pattern no. P1 P2 P3

Open with shelf, 15� wide Open Pedestal, One shelf 271/16� 15� 1513/16� VLG281515OSN $900. $945. $990.Open Pedestal, One shelf 271/16� 15� 1813/16� VLG281518OSN 945. 992. 1,040.Open Pedestal, One shelf 271/16� 15� 231/4� VLG281524OSN 1,045. 1,097. 1,150.Open Pedestal, One shelf 271/16� 15� 291/4� VLG281530OSN 1,100. 1,155. 1,210.

Hinged Door, 15� wide Full Door Pedestal, leftt hand 271/16� 15� 1513/16� VLG281515FDLNSL 1,105. 1,160. 1,216.Full Door Pedestal, right hand 271/16� 15� 1513/16� VLG281515FDRNSL 1,105. 1,160. 1,216.Full Door Pedestal, left hand 271/16� 15� 1813/16� VLG281518FDLNSL 1,150. 1,208. 1,265.Full Door Pedestal, right hand 271/16� 15� 1813/16� VLG281518FDRNSL 1,150. 1,208. 1,265.Full Door Pedestal, left hand 271/16� 15� 231/4� VLG281524FDLNSL 1,250. 1,313. 1,375.Full Door Pedestal, right hand 271/16� 15� 231/4� VLG281524FDRNSL 1,250. 1,313. 1,375.Full Door Pedestal, left hand 271/16� 15� 291/4� VLG281530FDLNSL 1,305. 1,370. 1,436.Full Door Pedestal, right hand 271/16� 15� 291/4� VLG281530FDRNSL 1,305. 1,370. 1,436.

Order Information

1. Base Pattern Number2. Lock option

D = Digital Keypad LockL = Cylinder LockN = Non-LockingR = RFID Lock

3. Paint FinishSee Finish Options page

4. Pull StyleT = 5� Finger Pull

5. Pull FinishSee Finish Option page

6. Lock Finish

Order Code

Example: VLG281524FDLNSL

VLG Quoin, Locker withGlides

28 28� High15 15� Wide24 24� DeepFDL Full Door LeftN No finished topS Steel Door(L) Cylinder Lock(118) Paint Finish, Bright

White(S) Standard Hinge(T) Pull Style, 5� Finger Pull(118) Pull Finish, Bight White(B) Lock finish, Black

Specific Information

Desk supporting lockers include 1removeable shelf.

Lockers with full door (FD) listedabove include standard cylinderlock. For additional lock options,substitute with:N = Non-Locking, deduct $15D = Digital Keypad lock, add $560R = RFID Lock, add $605Example (VLG281524FDLNSN)

Programming and Manager Key(s)are required for D or R lock types,specified separately. See DigitalKeypad and RFID lockspecifications for details.

Lockers with full door are availablewith soft close hinges. Specify Qhinge type, add $75 list.

Application Notes

Desk supporting lockers do notinclude coat hook.

Desk supporting lockers includehardware to attach to laminate top.Steel top option is not available fordesk supporting units.

Desk supporting lockers areintended to support one end of aworksurface or may be used infreestanding or bank applications.Finished height (28� nominal) alignswith standard Dividends Horizonworksurface height.

When specified non-locking, lockdrilling is omitted from door front.

Dimensions listed under ‘‘w’’, ‘‘h’’,‘‘d’’ are actual to the nearest 1/26�.

Quoin

23

Page 25: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

Desk Supporting LockersFor use with Feet12� Wide

description configuration h w d pattern no. P1 P2 P3

Open with shelf, 12� wide Open Pedestal, One shelf 271/16� 12� 1513/16� VLF281215OSN $775. $814. $853.Open Pedestal, One shelf 271/16� 12� 1813/16� VLF281218OSN 815. 856. 897.Open Pedestal, One shelf 271/16� 12� 231/4� VLF281224OSN 917. 963. 1,009.Open Pedestal, One shelf 271/16� 12� 291/4� VLF281230OSN 1,045. 1,097. 1,150.

Hinged Door, 12� wide Full Door Pedestal, left hand 271/16� 12� 1513/16� VLF281215FDLNSL 960. 1,008. 1,056.Full Door Pedestal, right hand 271/16� 12� 1513/16� VLF281215FDRNSL 960. 1,008. 1,056.Full Door Pedestal, left hand 271/16� 12� 1813/16� VLF281218FDLNSL 1,000. 1,050. 1,100.Full Door Pedestal, right hand 271/16� 12� 1813/16� VLF281218FDRNSL 1,000. 1,050. 1,100.Full Door Pedestal, left hand 271/16� 12� 231/4� VLF281224FDLNSL 1,102. 1,157. 1,212.Full Door Pedestal, right hand 271/16� 12� 231/4� VLF281224FDRNSL 1,102. 1,157. 1,212.Full Door Pedestal, left hand 271/16� 12� 291/4� VLF281230FDLNSL 1,230. 1,292. 1,353.Full Door Pedestal, right hand 271/16� 12� 291/4� VLF281230FDRNSL 1,230. 1,292. 1,353.

Order Information

1. Base Pattern Number2. Lock option

D = Digital Keypad LockL = Cylinder LockN = Non-LockingR = RFID Lock

3. Paint FinishSee Finish Options page

4. Pull StyleT = 5� Finger Pull

5. Pull FinishSee Finish Option page

6. Lock Finish

Order Code

Example: VLF281524FDLNSL

VLF Quoin Locker, For usewith Feet

28 28� High15 15� Wide24 24� DeepFDL Full Door LeftN No finished topS Steel Door(L) Cylinder Lock(118) Paint Finish, Bright

White(S) Standard Hinge(T) Pull Style, 5� Finger Pull(118) Pull Finish, Bight White(B) Lock finish, Black

Specific Information

Foot kits not included, must bespecified separately and installedon site.

Desk supporting lockers include 1removeable shelf.

Lockers with full door (FD) listedabove include standard cylinderlock. For additional lock options,substitute with:N = Non-Locking, deduct $15D = Digital Keypad lock, add $560R = RFID Lock, add $605Example (VLF281524FDLNSN)

Programming and Manager Key(s)are required for D or R lock types,specified separately. See DigitalKeypad and RFID lockspecifications for details.

Lockers with full door are availablewith soft close hinges. Specify Qhinge type, add $75 list.

Application Notes

Desk supporting lockers do notinclude coat hook.

Desk supporting lockers includehardware to attach to laminate top.Steel top option is not available fordesk supporting units.

Desk supporting lockers areintended to support one end of aworksurface or may be used infreestanding or bank applications.Finished height with foot kitinstalled is 28� nominal to alignwith standard Dividends Horizonworksurface height.

When specified non-locking, lockdrilling is omitted from door front.

Dimensions listed under ‘‘w’’, ‘‘h’’,‘‘d’’ are actual to the nearest 1/26�.

Quoin

24

Page 26: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

Desk Supporting LockersFor use with Feet15� wide

description configuration h w d pattern no. P1 P2 P3

Open with shelf, 15� wide Open Pedestal, One shelf 271/16� 15� 1513/16� VLF281515OSN $900. $945. $990.Open Pedestal, One shelf 271/16� 15� 1813/16� VLF281518OSN 945. 992. 1,040.Open Pedestal, One shelf 271/16� 15� 1813/16� VLF281524OSN 945. 992. 1,040.Open Pedestal, One shelf 271/16� 15� 291/4� VLF281530OSN 1,100. 1,155. 1,210.

Hinged Door, 15� wide Full Door Pedestal, leftt hand 271/16� 15� 1513/16� VLF281515FDLNSL 1,105. 1,160. 1,216.Full Door Pedestal, right hand 271/16� 15� 1513/16� VLF281515FDRNSL 1,105. 1,160. 1,216.Full Door Pedestal, left hand 271/16� 15� 1813/16� VLF281518FDLNSL 1,150. 1,208. 1,265.Full Door Pedestal, right hand 271/16� 15� 1813/16� VLF281518FDRNSL 1,150. 1,208. 1,265.Full Door Pedestal, left hand 271/16� 15� 231/4� VLF281524FDLNSL 1,250. 1,313. 1,375.Full Door Pedestal, right hand 271/16� 15� 231/4� VLF281524FDRNSL 1,250. 1,313. 1,375.Full Door Pedestal, left hand 271/16� 15� 291/4� VLF281530FDLNSL 1,305. 1,370. 1,436.Full Door Pedestal, right hand 271/16� 15� 291/4� VLF281530FDRNSL 1,305. 1,370. 1,436.

Order Information

1. Base Pattern Number2. Lock option

D = Digital Keypad LockL = Cylinder LockN = Non-LockingR = RFID Lock

3. Paint FinishSee Finish Options page

4. Pull StyleT = 5� Finger Pull

5. Pull FinishSee Finish Option page

6. Lock Finish

Order Code

Example: VLF281524FDLNSL

VLF Quoin Locker, For usewith Feet

28 28� High15 15� Wide24 24� DeepFDL Full Door LeftN No finished topS Steel Door(L) Cylinder Lock(118) Paint Finish, Bright

White(S) Standard Hinge(T) Pull Style, 5� Finger Pull(118) Pull Finish, Bight White(B) Lock finish, Black

Specific Information

Foot kits not included, must bespecified separately and installedon site.

Desk supporting lockers include 1removeable shelf.

Lockers with full door (FD) listedabove include standard cylinderlock. For additional lock options,substitute with:N = Non-Locking, deduct $15D = Digital Keypad lock, add $560R = RFID Lock, add $605Example (VLF281524FDLNSN)

Programming and Manager Key(s)are required for D or R lock types,specified separately. See DigitalKeypad and RFID lockspecifications for details.

Lockers with full door are availablewith soft close hinges. Specify Qhinge type, add $75 list.

Application Notes

Desk supporting lockers do notinclude coat hook.

Desk supporting lockers includehardware to attach to laminate top.Steel top option is not available fordesk supporting units.

Desk supporting lockers areintended to support one end of aworksurface or may be used infreestanding or bank applications.Finished height with foot kitinstalled is 28� nominal to alignwith standard Dividends Horizonworksurface height.

When specified non-locking, lockdrilling is omitted from door front.

Dimensions listed under ‘‘w’’, ‘‘h’’,‘‘d’’ are actual to the nearest 1/26�.

Quoin

25

Page 27: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

LockersOpen with Shelves with Leveling Glides12� Wide

description no. shelvesnominalht. h w d pattern no. P1 P2 P3

Open with Shelves, 12�w x 15�d 1 36� 343/16� 12� 1513/16� VLG361215OSS $860. $903. $946.2 42� 411/2� 12� 1513/16� VLG421215OSS 904. 949. 994.3 50� 483/4� 12� 1513/16� VLG501215OSS 973. 1,022. 1,070.3 57� 561/16� 12� 1513/16� VLG571215OSS 1,044. 1,096. 1,148.

Open with Shelves, 12�w x 18�d 1 36� 343/16� 12� 1813/16� VLG361218OSS 904. 949. 994.2 42� 411/2� 12� 1813/16� VLG421218OSS 949. 996. 1,044.3 50� 483/4� 12� 1813/16� VLG501218OSS 1,022. 1,073. 1,124.3 57� 561/16� 12� 1813/16� VLG571218OSS 1,096. 1,151. 1,206.

Open with Shelves, 12�w x 24�d 1 36� 343/16� 12� 231/4� VLG361224OSS 987. 1,036. 1,086.2 42� 411/2� 12� 231/4� VLG421224OSS 1,036. 1,088. 1,140.3 50� 483/4� 12� 231/4� VLG501224OSS 1,118. 1,174. 1,230.3 57� 561/16� 12� 231/4� VLG571224OSS 1,203. 1,263. 1,323.

Open with Shelves, 12�w x 30�d 1 36� 343/16� 12� 291/4� VLG361230OSS 1,110. 1,166. 1,221.2 42� 411/2� 12� 291/4� VLG421230OSS 1,116. 1,224. 1,283.3 50� 483/4� 12� 291/4� VLG501230OSS 1,262. 1,325. 1,388.3 57� 561/16� 12� 291/4� VLG571230OSS 1,359. 1,427. 1,495.

Order Information

1. Base Pattern Number2. Paint Finish

See Finish Options page

Order Code

Example: VLG421224OSS

VLG Quoin, Locker withGlides

42 42� High12 12� Wide24 24� DeepOS Open with shelvesS Steel Top(118) Paint Finish, Bright

White

Specific Information

All open lockers include adjustableheight shelves in quantitiesindicated above. Shelves are factoryinstalled. See SpecificationInformation for shelf positions andclearances.

Lockers are designed to align withunderside of Dividends Horizonpanel top cap.

Lockers include (4) adjustableleveling glides.

Application Notes

Above listed lockers include afinished steel top. Lockers may bespecified without a steel top for usewith an individual or commonlaminate top, specified separately.to specify locker without top,substitute top option character withan ‘‘N’’ and deduct $40 list(Example: VLG421224OSN).

Dimensions listed under ’w’, ’h’, ’d’are actual to the nearest 1/6�.

50� and 57� high lockers, 15�, 18�and 24� deep (nominal) requireganging or counterweight forstability. See Locker StabilityRequirements for details.

All lockers 42� and 36� high may beused freestanding.

All lockers 30� deep may be usedfreestanding.

Quoin

26

Page 28: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

LockersOpen with Shelves with Leveling Glides15� Wide

description configurationnominalht. h w d pattern no. P1 P2 P3

Open with Shelves, 15�w x 15�d 1 36� 343/16� 15� 1513/16� VLG361515OSS $1,235. $1,297. $1,359.2 42� 411/2� 15� 1513/16� VLG421515OSS 1,285. 1,349. 1,414.3 50� 483/4� 15� 1513/16� VLG501515OSS 1,356. 1,424. 1,492.3 57� 561/16� 15� 1513/16� VLG571515OSS 1,429. 1,500. 1,572.

Open with Shelves, 15�w x 18�d 1 36� 343/16� 15� 1813/16� VLG361518OSS 1,272. 1,336. 1,399.2 42� 411/2� 15� 1813/16� VLG421518OSS 1,324. 1,390. 1,456.3 50� 483/4� 15� 1813/16� VLG501518OSS 1,397. 1,467. 1,537.3 57� 561/16� 15� 1813/16� VLG571518OSS 1,471. 1,545. 1,618.

Open with Shelves, 15�w x 24�d 1 36� 343/16� 15� 231/4� VLG361524OSS 1,357. 1,425. 1,493.2 42� 411/2� 15� 231/4� VLG421524OSS 1,411. 1,482. 1,552.3 50� 483/4� 15� 231/4� VLG501524OSS 1,493. 1,568. 1,642.3 57� 561/16� 15� 231/4� VLG571524OSS 1,578. 1,657. 1,736.

Open with Shelves, 15�w x 30�d 1 36� 343/16� 15� 291/4� VLG361530OSS 1,481. 1,555. 1,629.2 42� 41 1 /2� 15� 291/4� VLG421530OSS 1,710. 1,796. 1,881.3 50� 483/4� 15� 291/4� VLG501530OSS 1,815. 1,906. 1,997.3 57� 561/16� 15� 291/4� VLG571530OSS 1,922. 2,018. 2,114.

Order Information

1. Base Pattern Number2. Paint Finish

See Finish Options page

Order Code

Example: VLG421524OSS

VLG Quoin, Locker withGlides

42 42� High15 15� Wide24 24� DeepOS Open with shelvesS Steel Top(118) Paint Finish, Bright

White

Specific Information

All open lockers include adjustableheight shelves in quantitiesindicated above. Shelves are factoryinstalled. See SpecificationInformation for shelf positions andclearances.

Lockers are designed to align withunderside of Dividends Horizonpanel top cap.

Lockers include (4) adjustableleveling glides.

Application Notes

Above listed lockers include afinished steel top. Lockers may bespecified without a steel top for usewith an individual or commonlaminate top, specified separately.to specify locker without top,substitute top option character withan ‘‘N’’ and deduct $40 list(Example: VLG421224OSN).

Dimensions listed under ’w’, ’h’, ’d’are actual to the nearest 1/6�.

50� and 57� high lockers, 18.75�and 24� deep require ganging orcounterweight for stability. SeeLocker Stability Requirements fordetails.

All lockers 42� and 36� high may beused freestanding.

All lockers 30� deep may be usedfreestanding.

Quoin

27

Page 29: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

LockersFull Door with Leveling Glides12� Wide

description configurationnominalht. h w d pattern no. P1 P2 P3

Full Height Door, 12�w x 15�d left hand 36� 343/16� 12� 1513/16� VLG361215FDLSSL $978. $1,027. $1,076.right hand 36� 343/16� 12� 1513/16� VLG361215FDRSSL 978. 1,027. 1,076.left hand 42� 411/2� 12� 1513/16� VLG421215FDLSSL 1,027. 1,078. 1,130.right hand 42� 411/2� 12� 1513/16� VLG421215FDRSSL 1,027. 1,078. 1,130.left hand 50� 483/4� 12� 1513/16� VLG501215FDLSSL 1,105. 1,160. 1,216.right hand 50� 483/4� 12� 1513/16� VLG501215FDRSSL 1,105. 1,160. 1,216.left hand 57� 561/16� 12� 1513/16� VLG571215FDLSSL 1,184. 1,243. 1,302.right hand 57� 561/16� 12� 1513/16� VLG571215FDRSSL 1,184. 1,243. 1,302.

Full Height Door, 12�w x 18�d

(left hand shown)

left hand 36� 343/16� 12� 1813/16� VLG361218FDLSSL 1,027. 1,078. 1,130.right hand 36� 343/16� 12� 1813/16� VLG361218FDRSSL 1,027. 1,078. 1,130.left hand 42� 411/2� 12� 1813/16� VLG421218FDLSSL 1,078. 1,132. 1,186.right hand 42� 411/2� 12� 1813/16� VLG421218FDRSSL 1,078. 1,132. 1,186.left hand 50� 483/4� 12� 1813/16� VLG501218FDLSSL 1,160. 1,218. 1,276.right hand 50� 483/4� 12� 1813/16� VLG501218FDRSSL 1,160. 1,218. 1,276.left hand 57� 561/16� 12� 1813/16� VLG571218FDLSSL 1,243. 1,305. 1,367.right hand 57� 561/16� 12� 1813/16� VLG571218FDRSSL 1,243. 1,305. 1,367.

Full Height Door, 12�w x 24�d

(left hand shown)

left hand 36� 343/16� 12� 231/4� VLG361224FDLSSL 1,120. 1,176. 1,232.right hand 36� 343/16� 12� 231/4� VLG361224FDRSSL 1,120. 1,176. 1,232.left hand 42� 411/2� 12� 231/4� VLG421224FDLSSL 1,176. 1,235. 1,294.right hand 42� 411/2� 12� 231/4� VLG421224FDRSSL 1,176. 1,235. 1,294.left hand 50� 483/4� 12� 231/4� VLG501224FDLSSL 1,267. 1,330. 1,394.right hand 50� 483/4� 12� 231/4� VLG501224FDRSSL 1,267. 1,330. 1,394.left hand 57� 561/16� 12� 231/4� VLG571224FDLSSL 1,362. 1,430. 1,498.right hand 57� 561/16� 12� 231/4� VLG571224FDRSSL 1,362. 1,430. 1,498.

Order Information

1. Base Pattern Number2. Lock option

D = Digital Keypad LockL = Cylinder LockN = Non-lockingR = RFID Lock

3. Paint FinishSee Finish Options page

4. Pull styleT = 5� Finger pull

5. Pull finishSee Finish Options page

6. Lock finish

Order Code

Example: VLG421224FDLSSL

VLG Quoin, Locker withGlides

42 42� High12 12� Wide24 24� DeepFDL Full Door LeftS Steel TopS Steel Door(L) Cylinder Lock(118) Paint Finish, Bright

White(S) Standard Hinge(T) Pull Style, 5� Finger pull(118) Pull Finish, Bright

White(B) Lock finish, Black

Specific Information

All lockers 36� high and taller withhinged door include factoryinstalled, dual-prong coat hook andone adjustable shelf installed inlowest shelf position. SeeSpecification Information foradditional shelf positions.

Above listed pattern numbersinclude standard cylinder lock. Foradditional lock options, substitutethe final ‘‘L’’ of pattern number with:N = Non-Locking, deduct $15D = Digital Keypad lock, add $560R = RFID lock, add $605Example (VLG501224FDLSSN).

Programming and Manager Key(s)are required for D or R lock types,specified separately. See DigitalKeypad and RFID lockspecifications for details.

Lockers with full door are availablewith soft close hinges. Specify Qhinge type, add $75 list.

Application Notes

Above listed lockers include afinished steel top. Lockers may bespecified without a steel top for usewith an individual or commonlaminate top, specified separately.to specify locker without top,substitute top option character withan ‘‘N’’ and deduct $40 list(Example: VLG421224FDLNSL).

When specified non-locking, lockdrilling is omitted from door front.

Dimensions listed under ’w’, ’h’, ’d’are actual to the nearest 1/6�.

50� and 57� high lockers, 15�, 18�and 24� deep (nominal) requireganging or counterweight forstability. See Locker StabilityRequirements for details.

All lockers 42� and 36� high may beused freestanding.

All lockers 30� deep may be usedfreestanding.

Quoin

28

Page 30: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

LockersFull Door with Leveling Glides12� Wide

description configurationnominalht. h w d pattern no. P1 P2 P3

Full Height Door, 12�w x 30�d

(left hand shown)

left hand 36� 343/16� 12� 291/4� VLG361230FDLSSL $1,258. $1,321. $1,384.right hand 36� 343/16� 12� 291/4� VLG361230FDRSSL 1,258. 1,321. 1,384.left hand 42� 411/2� 12� 291/4� VLG421230FDLSSL 1,321. 1,387. 1,453.right hand 42� 411/2� 12� 291/4� VLG421230FDRSSL 1,321. 1,387. 1,453.left hand 50� 483/4� 12� 291/4� VLG501230FDLSSL 1,428. 1,499. 1,571.right hand 50� 483/4� 12� 291/4� VLG501230FDRSSL 1,428. 1,499. 1,571.left hand 57� 561/16� 12� 291/4� VLG571230FDLSSL 1,537. 1,614. 1,691.right hand 57� 561/16� 12� 291/4� VLG571230FDRSSL 1,537. 1,614. 1,691.

Order Information

1. Base Pattern Number2. Lock option

D = Digital Keypad LockL = Cylinder LockN = Non-lockingR = RFID Lock

3. Paint FinishSee Finish Options page

4. Pull styleT = 5� Finger pull

5. Pull finishSee Finish Options page

6. Lock finish

Order Code

Example: VLG421224FDLSSL

VLG Quoin, Locker withGlides

42 42� High12 12� Wide24 24� DeepFDL Full Door LeftS Steel TopS Steel Door(L) Cylinder Lock(118) Paint Finish, Bright

White(S) Standard Hinge(T) Pull Style, 5� Finger pull(118) Pull Finish, Bright

White(B) Lock finish, Black

Specific Information

All lockers 36� high and taller withhinged door include factoryinstalled, dual-prong coat hook andone adjustable shelf installed inlowest shelf position. SeeSpecification Information foradditional shelf positions.

Above listed pattern numbersinclude standard cylinder lock. Foradditional lock options, substitutethe final ‘‘L’’ of pattern number with:N = Non-Locking, deduct $15D = Digital Keypad lock, add $560R = RFID lock, add $605Example (VLG501224FDLSSN).

Programming and Manager Key(s)are required for D or R lock types,specified separately. See DigitalKeypad and RFID lockspecifications for details.

Lockers with full door are availablewith soft close hinges. Specify Qhinge type, add $75 list.

Application Notes

Above listed lockers include afinished steel top. Lockers may bespecified without a steel top for usewith an individual or commonlaminate top, specified separately.to specify locker without top,substitute top option character withan ‘‘N’’ and deduct $40 list(Example: VLG421224FDLNSL).

When specified non-locking, lockdrilling is omitted from door front.

Dimensions listed under ’w’, ’h’, ’d’are actual to the nearest 1/6�.

50� and 57� high lockers, 15�, 18�and 24� deep (nominal) requireganging or counterweight forstability. See Locker StabilityRequirements for details.

All lockers 42� and 36� high may beused freestanding.

All lockers 30� deep may be usedfreestanding.

Quoin

29

Page 31: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

LockersFull Door with Leveling Glides15� Wide

description configurationnominalht. h w d pattern no. P1 P2 P3

Full Height Door, 15�w x 15�d left hand 36� 343/16� 15� 1513/16� VLG361515FDLSSL $1,398. $1,468. $1,538.right hand 36� 343/16� 15� 1513/16� VLG361515FDRSSL 1,398. 1,468. 1,538.left hand 42� 411/2� 15� 1513/16� VLG421515FDLSSL 1,454. 1,527. 1,599.right hand 42� 411/2� 15� 1513/16� VLG421515FDRSSL 1,454. 1,527. 1,599.right hand 50� 483/4� 15� 1513/16� VLG501515FDLSSL 1,534. 1,611. 1,687.left hand 50� 483/4� 15� 1513/16� VLG501515FDRSSL 1,534. 1,611. 1,687.left hand 57� 561/16� 15� 1513/16� VLG571515FDLSSL 1,615. 1,696. 1,777.right hand 57� 561/16� 15� 1513/16� VLG571515FDRSSL 1,615. 1,696. 1,777.

Full Height Door, 15�w x 18�d

(left hand shown)

left hand 36� 343/16� 15� 1813/16� VLG361518FDLSSL 1,440. 1,512. 1,584.right hand 36� 343/16� 15� 1813/16� VLG361518FDRSSL 1,440. 1,512. 1,584.left hand 42� 411/2� 15� 1813/16� VLG421518FDLSSL 1,498. 1,573. 1,648.right hand 42� 411/2� 15� 1813/16� VLG421518FDRSSL 1,498. 1,573. 1,648.left hand 50� 483/4� 15� 1813/16� VLG501518FDLSSL 1,580. 1,659. 1,738.right hand 50� 483/4� 15� 1813/16� VLG501518FDRSSL 1,580. 1,659. 1,738.left hand 57� 561/16� 15� 1813/16� VLG571518FDLSSL 1,663. 1,746. 1,829.right hand 57� 561/16� 15� 1813/16� VLG571518FDRSSL 1,663. 1,746. 1,829.

Full Height Door, 15�w x 24�d

(left hand shown)

left hand 36� 343/16� 15� 231/4� VLG361524FDLSSL 1,550. 1,627. 1,704.right hand 36� 343/16� 15� 231/4� VLG361524FDRSSL 1,550. 1,627. 1,704.left hand 42� 411/2� 15� 231/4� VLG421524FDLSSL 1,596. 1,676. 1,756.right hand 42� 411/2� 15� 231/4� VLG421524FDRSSL 1,596. 1,676. 1,756.left hand 50� 483/4� 15� 231/4� VLG501524FDLSSL 1,687. 1,771. 1,856.right hand 50� 483/4� 15� 231/4� VLG501524FDRSSL 1,687. 1,771. 1,856.left hand 57� 561/16� 15� 231/4� VLG571524FDLSSL 1,782. 1,871. 1,960.right hand 57� 561/16� 15� 231/4� VLG571524FDRSSL 1,782. 1,871. 1,960.

Order Information

1. Base Pattern Number2. Lock option

D = Digital Keypad LockL = Cylinder LockN = Non-lockingR = RFID Lock

3. Paint FinishSee Finish Options page

4. Pull styleT = 5� Finger pull

5. Pull finishSee Finish Options page

6. Lock finish

Order Code

Example: VLG421224FDLSSL

VLG Quoin, Locker withGlides

42 42� High15 15� Wide24 24� DeepFDL Full Door LeftS Steel TopS Steel Door(L) Cylinder Lock(118) Paint Finish, Bright

White(S) Standard Hinge(T) Pull Style, 5� Finger pull(118) Pull Finish, Bright

White(B) Lock finish, Black

Specific Information

All lockers 36� high and taller withhinged door include factoryinstalled, dual-prong coat hook andone adjustable shelf installed inlowest shelf position. SeeSpecification Information foradditional shelf positions.

Above listed pattern numbersinclude standard cylinder lock. Foradditional lock options, substitutethe final ‘‘L’’ of pattern number with:N = Non-Locking, deduct $15D = Digital Keypad lock, add $560R = RFID lock, add $605Example (VLG501224FDLSSN).

Programming and Manager Key(s)are required for D or R lock types,specified separately. See DigitalKeypad and RFID lockspecifications for details.

Lockers with full door are availablewith soft close hinges. Specify Qhinge type, add $75 list.

Application Notes

Above listed lockers include afinished steel top. Lockers may bespecified without a steel top for usewith an individual or commonlaminate top, specified separately.to specify locker without top,substitute top option character withan ‘‘N’’ and deduct $40 list(Example: VLG421224FDLNSL).

When specified non-locking, lockdrilling is omitted from door front.

Dimensions listed under ’w’, ’h’, ’d’are actual to the nearest 1/6�.

50� and 57� high lockers, 15�, 18�and 24� deep (nominal) requireganging or counterweight forstability. See Locker StabilityRequirements for details.

All lockers 42� and 36� high may beused freestanding.

All lockers 30� deep may be usedfreestanding.

Quoin

30

Page 32: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

LockersFull Door with Leveling Glides15� Wide

description configurationnominalht. h w d pattern no. P1 P2 P3

Full Height Door, 15�w x 30�d

(left hand shown)

left hand 36� 343/16� 15� 291/4� VLG361530FDLSSL $1,674. $1,758. $1,841.right hand 36� 343/16� 15� 291/4� VLG361530FDRSSL 1,674. 1,758. 1,841.left hand 42� 411/2� 15� 291/4� VLG421530FDLSSL 1,741. 1,828. 1,915.right hand 42� 411/2� 15� 291/4� VLG421530FDRSSL 1,741. 1,828. 1,915.left hand 50� 483/4� 15� 291/4� VLG501530FDLSSL 1,848. 1,940. 2,033.right hand 50� 483/4� 15� 291/4� VLG501530FDRSSL 1,848. 1,940. 2,033.left hand 57� 561/16� 15� 291/4� VLG571530FDLSSL 1,957. 2,055. 2,153.right hand 57� 561/16� 15� 291/4� VLG571530FDRSSL 1,957. 2,055. 2,153.

Order Information

1. Base Pattern Number2. Lock option

D = Digital Keypad LockL = Cylinder LockN = Non-lockingR = RFID Lock

3. Paint FinishSee Finish Options page

4. Pull styleT = 5� Finger pull

5. Pull finishSee Finish Options page

6. Lock finish

Order Code

Example: VLG421224FDLSSL

VLG Quoin, Locker withGlides

42 42� High15 15� Wide24 24� DeepFDL Full Door LeftS Steel TopS Steel Door(L) Cylinder Lock(118) Paint Finish, Bright

White(S) Standard Hinge(T) Pull Style, 5� Finger pull(118) Pull Finish, Bright

White(B) Lock finish, Black

Specific Information

All lockers 36� high and taller withhinged door include factoryinstalled, dual-prong coat hook andone adjustable shelf installed inlowest shelf position. SeeSpecification Information foradditional shelf positions.

Above listed pattern numbersinclude standard cylinder lock. Foradditional lock options, substitutethe final ‘‘L’’ of pattern number with:N = Non-Locking, deduct $15D = Digital Keypad lock, add $560R = RFID lock, add $605Example (VLG501224FDLSSN).

Programming and Manager Key(s)are required for D or R lock types,specified separately. See DigitalKeypad and RFID lockspecifications for details.

Lockers with full door are availablewith soft close hinges. Specify Qhinge type, add $75 list.

Application Notes

Above listed lockers include afinished steel top. Lockers may bespecified without a steel top for usewith an individual or commonlaminate top, specified separately.to specify locker without top,substitute top option character withan ‘‘N’’ and deduct $40 list(Example: VLG421224FDLNSL).

When specified non-locking, lockdrilling is omitted from door front.

Dimensions listed under ’w’, ’h’, ’d’are actual to the nearest 1/6�.

50� and 57� high lockers, 15�, 18�and 24� deep (nominal) requireganging or counterweight forstability. See Locker StabilityRequirements for details.

All lockers 42� and 36� high may beused freestanding.

All lockers 30� deep may be usedfreestanding.

Quoin

31

Page 33: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

LockersOpen with Shelves, for use with feet12� Wide

description no. shelveselevationht. h w d pattern no. P1 P2 P3

Open with Shelves, 12�w x 15�d

*shown with foot kit, specified separately

1 36� 307/8� 12� 1513/16� VLF361215OSS $860. $903. $946.2 42� 383/16� 12� 1513/16� VLF421215OSS 904. 949. 994.3 50� 451/2� 12� 1513/16� VLF501215OSS 973. 1,022. 1,070.3 57� 5213/16� 12� 1513/16� VLF571215OSS 1,044. 1,096. 1,148.

Open with Shelves, 12�w x 18�d

*shown with foot kit, specified separately

1 36� 307/8� 12� 1813/16� VLF361218OSS 904. 949. 994.2 42� 383/16� 12� 1813/16� VLF421218OSS 949. 996. 1,044.3 50� 451/2� 12� 1813/16� VLF501218OSS 1,022. 1,073. 1,124.3 57� 5213/16� 12� 1813/16� VLF571218OSS 1,096. 1,151. 1,206.

Open with Shelves, 12�w x 24�d

*shown with foot kit, specified separately

1 36� 307/8� 12� 231/4� VLF361224OSS 987. 1,036. 1,086.2 42� 383/16� 12� 231/4� VLF421224OSS 1,036. 1,088. 1,140.3 50� 451/2� 12� 231/4� VLF501224OSS 1,118. 1,174. 1,230.3 57� 5213/16� 12� 231/4� VLF571224OSS 1,203. 1,263. 1,323.

Order Information

1. Base Pattern Number2. Paint Finish

See Finish Options page

Order Code

Example: VLF421224OSS

VLF Quoin, for Feet42 42� High12 12� Wide24 24� DeepOS Open with shelvesS Steel Top(118) Paint Finish, Bright

White

Specific Information

Foot kits not included, must bespecified separately and installedon site.

All open lockers include adjustableheight shelves in quantitiesindicated above. Shelves are factoryinstalled. See SpecificationInformation for shelf positions andclearances.

Lockers for use with feet aredesigned to align with underside ofDividends Horizon panel top capwith foot kits installed.

Lockers for feet do not includeleveling glides.

Application Notes

Above listed lockers include afinished steel top. Lockers may bespecified without a steel top for usewith an individual or commonlaminate top, specified separately.to specify locker without top,substitute top option character withan ‘‘N’’ and deduct $40 list(Example: VLG421224OSN).

Dimensions listed under ’w’, ’h’, ’d’are actual to the nearest 1/6�.

50� and 57� high lockers, 15�, 18�and 24� deep (nominal) requireganging or counterweight forstability. See Locker StabilityRequirements for details.

All lockers 42� and 36� high may beused freestanding.

All lockers 30� deep may be usedfreestanding.

Quoin

32

Page 34: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

LockersOpen with Shelves, for use with feet12� Wide

description no. shelveselevationht. h w d pattern no. P1 P2 P3

Open with Shelves, 12�w x 30�d

*shown with foot kit, specified separately

1 36� 307/8� 12� 291/4� VLF361230OSS $1,110. $1,166. $1,221.2 42� 383/16� 12� 291/4� VLF421230OSS 1,116. 1,224. 1,283.3 50� 451/2� 12� 291/4� VLF501230OSS 1,262. 1,325. 1,388.3 57� 5213/16� 12� 291/4� VLF571230OSS 1,359. 1,427. 1,495.

Order Information

1. Base Pattern Number2. Paint Finish

See Finish Options page

Order Code

Example: VLF421224OSS

VLF Quoin, for Feet42 42� High12 12� Wide24 24� DeepOS Open with shelvesS Steel Top(118) Paint Finish, Bright

White

Specific Information

Foot kits not included, must bespecified separately and installedon site.

All open lockers include adjustableheight shelves in quantitiesindicated above. Shelves are factoryinstalled. See SpecificationInformation for shelf positions andclearances.

Lockers for use with feet aredesigned to align with underside ofDividends Horizon panel top capwith foot kits installed.

Lockers for feet do not includeleveling glides.

Application Notes

Above listed lockers include afinished steel top. Lockers may bespecified without a steel top for usewith an individual or commonlaminate top, specified separately.to specify locker without top,substitute top option character withan ‘‘N’’ and deduct $40 list(Example: VLG421224OSN).

Dimensions listed under ’w’, ’h’, ’d’are actual to the nearest 1/6�.

50� and 57� high lockers, 15�, 18�and 24� deep (nominal) requireganging or counterweight forstability. See Locker StabilityRequirements for details.

All lockers 42� and 36� high may beused freestanding.

All lockers 30� deep may be usedfreestanding.

Quoin

33

Page 35: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

LockersOpen with Shelves, for use with feet15� Wide

description configurationelevationht. h w d pattern no. P1 P2 P3

Open with Shelves, 15�w x 15�d

*shown with foot kit, specified separately

1 36� 307/8� 15� 1513/16� VLF361515OSS $1,235. $1,297. $1,359.2 42� 383/16� 15� 1513/16� VLF421515OSS 1,285. 1,349. 1,414.3 50� 451/2� 15� 1513/16� VLF501515OSS 1,356. 1,424. 1,492.3 57� 5213/16� 15� 1513/16� VLF571515OSS 1,429. 1,500. 1,572.

Open with Shelves, 15�w x 18�d

*shown with foot kit, specified separately

1 36� 307/8� 15� 1813/16� VLF361518OSS 1,272. 1,336. 1,399.2 42� 383/16� 15� 1813/16� VLF421518OSS 1,324. 1,390. 1,456.3 50� 451/2� 15� 1813/16� VLF501518OSS 1,397. 1,467. 1,537.3 57� 5213/16� 15� 1813/16� VLF571518OSS 1,471. 1,545. 1,618.

Open with Shelves, 15�w x 24�d

*shown with foot kit, specified separately

1 36� 307/8� 15� 231/4� VLF361524OSS 1,357. 1,425. 1,493.2 42� 383/16� 15� 231/4� VLF421524OSS 1,411. 1,482. 1,552.3 50� 451/2� 15� 231/4� VLF501524OSS 1,493. 1,568. 1,642.3 57� 5213/16� 15� 231/4� VLF571524OSS 1,578. 1,657. 1,736.

Order Information

1. Base Pattern Number2. Paint Finish

See Finish Options page

Order Code

Example: VLF421524OSS

VLF Quoin, for Feet42 42� High15 15� Wide24 24� DeepOS Open with shelvesS Steel Top(118) Paint Finish, Bright

White

Specific Information

Foot kits not included, must bespecified separately and installedon site.

All open lockers include adjustableheight shelves in quantitiesindicated above. Shelves are factoryinstalled. See SpecificationInformation for shelf positions andclearances.

Lockers for use with feet aredesigned to align with underside ofDividends Horizon panel top capwith foot kits installed.

Lockers for feet do not includeleveling glides.

Application Notes

Above listed lockers include afinished steel top. Lockers may bespecified without a steel top for usewith an individual or commonlaminate top, specified separately.to specify locker without top,substitute top option character withan ‘‘N’’ and deduct $40 list(Example: VLG421224OSN).

Dimensions listed under ’w’, ’h’, ’d’are actual to the nearest 1/6�.

50� and 57� high lockers, 18.75�and 24� deep require ganging orcounterweight for stability. SeeLocker Stability Requirements fordetails.

All lockers 42� and 36� high may beused freestanding.

All lockers 30� deep may be usedfreestanding.

Quoin

34

Page 36: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

LockersOpen with Shelves, for use with feet15� Wide

description configurationelevationht. h w d pattern no. P1 P2 P3

Open with Shelves, 15�w x 30�d

*shown with foot kit, specified separately

1 36� 307/8� 15� 291/4� VLF361530OSS $1,481. $1,555. $1,629.2 42� 383/16� 15� 291/4� VLF421530OSS 1,710. 1,796. 1,881.3 50� 451/2� 15� 291/4� VLF501530OSS 1,815. 1,906. 1,997.3 57� 5213/16� 15� 291/4� VLF571530OSS 1,922. 2,018. 2,114.

Order Information

1. Base Pattern Number2. Paint Finish

See Finish Options page

Order Code

Example: VLF421524OSS

VLF Quoin, for Feet42 42� High15 15� Wide24 24� DeepOS Open with shelvesS Steel Top(118) Paint Finish, Bright

White

Specific Information

Foot kits not included, must bespecified separately and installedon site.

All open lockers include adjustableheight shelves in quantitiesindicated above. Shelves are factoryinstalled. See SpecificationInformation for shelf positions andclearances.

Lockers for use with feet aredesigned to align with underside ofDividends Horizon panel top capwith foot kits installed.

Lockers for feet do not includeleveling glides.

Application Notes

Above listed lockers include afinished steel top. Lockers may bespecified without a steel top for usewith an individual or commonlaminate top, specified separately.to specify locker without top,substitute top option character withan ‘‘N’’ and deduct $40 list(Example: VLG421224OSN).

Dimensions listed under ’w’, ’h’, ’d’are actual to the nearest 1/6�.

50� and 57� high lockers, 18.75�and 24� deep require ganging orcounterweight for stability. SeeLocker Stability Requirements fordetails.

All lockers 42� and 36� high may beused freestanding.

All lockers 30� deep may be usedfreestanding.

Quoin

35

Page 37: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

LockersFull Door, for use with feet12� Wide

description configurationelevationht. h w d pattern no. P1 P2 P3

Full Height Door, 12�w x 15�d left hand 36� 307/8� 12� 1513/16� VLF361215FDLSSL $978. $1,027. $1,076.right hand 36� 307/8� 12� 1513/16� VLF361215FDRSSL 978. 1,027. 1,076.left hand 42� 383/16� 12� 1513/16� VLF421215FDLSSL 1,027. 1,078. 1,130.right hand 42� 383/16� 12� 1513/16� VLF421215FDRSSL 1,027. 1,078. 1,130.left hand 50� 451/2� 12� 1513/16� VLF501215FDLSSL 1,105. 1,160. 1,216.right hand 50� 451/2� 12� 1513/16� VLF501215FDRSSL 1,105. 1,160. 1,216.left hand 57� 5213/16� 12� 1513/16� VLF571215FDLSSL 1,184. 1,243. 1,302.right hand 57� 5213/16� 12� 1513/16� VLF571215FDRSSL 1,184. 1,243. 1,302.

*Shown with feet, specified separtely

Full Height Door, 12�w x 18�d left hand 36� 307/8� 12� 1813/16� VLF361218FDLSSL 1,027. 1,078. 1,130.right hand 36� 307/8� 12� 1813/16� VLF361218FDRSSL 1,027. 1,078. 1,130.left hand 42� 383/16� 12� 1813/16� VLF421218FDLSSL 1,078. 1,132. 1,186.right hand 42� 383/16� 12� 1813/16� VLF421218FDRSSL 1,078. 1,132. 1,186.left hand 50� 451/2� 12� 1813/16� VLF501218FDLSSL 1,160. 1,218. 1,276.right hand 50� 451/2� 12� 1813/16� VLF501218FDRSSL 1,160. 1,218. 1,276.left hand 57� 5213/16� 12� 1813/16� VLF571218FDLSSL 1,243. 1,305. 1,367.right hand 57� 5213/16� 12� 1813/16� VLF571218FDRSSL 1,243. 1,305. 1,367.

*Shown with feet, specified separtely

Full Height Door, 12�w x 24�d left hand 36� 307/8� 12� 231/4� VLF361224FDLSSL 1,120. 1,176. 1,232.right hand 36� 307/8� 12� 231/4� VLF361224FDRSSL 1,120. 1,176. 1,232.left hand 42� 383/16� 12� 231/4� VLF421224FDLSSL 1,176. 1,235. 1,294.right hand 42� 383/16� 12� 231/4� VLF421224FDRSSL 1,176. 1,235. 1,294.left hand 50� 451/2� 12� 231/4� VLF501224FDLSSL 1,267. 1,330. 1,394.right hand 50� 451/2� 12� 231/4� VLF501224FDRSSL 1,267. 1,330. 1,394.left hand 57� 5213/16� 12� 231/4� VLF571224FDLSSL 1,362. 1,430. 1,498.right hand 57� 5213/16� 12� 231/4� VLF571224FDRSSL 1,362. 1,430. 1,498.

*Shown with feet, specified separtely

Order Information

1. Base Pattern Number2. Lock option

D = Digital Keypad LockL = Cylinder LockN = Non-lockingR = RFID Lock

3. Paint FinishSee Finish Options page

4. Pull styleT = 5� Finger pull

5. Pull finishSee Finish Options page

6. Lock finish

Order Code

Example: VLF421224FDLSSL

VLF Quoin, Locker for Feet42 42� High12 12� Wide24 24� DeepFDL Full Door LeftS Steel TopS Steel Door(L) Cylinder Lock(118) Paint Finish, Bright

White(S) Standard Hinge(T) Pull Style, 5� Finger pull(118) Pull Finish, Bright

White(B) Lock finish, Black

Specific Information

Foot kits not included, must bespecified separately and installedon site.

All lockers 36� high and taller withhinged door include factoryinstalled, dual-prong coat hook andone adjustable shelf installed inlowest shelf position. SeeSpecification Information foradditional shelf positions.

Above listed pattern numbersinclude standard cylinder lock. Foradditional lock options, substitutethe final ‘‘L’’ of pattern number with:N = Non-Locking, deduct $15D = Digital Keypad lock, add $560R = RFID lock, add $605Example (VLG501224FDLSSN).

Lockers for feet do not includeleveling glides.

Lockers for use with feet aredesigned to align with underside ofDividends Horizon panel top capwith foot kits installed.

Lockers with full door are availablewith soft close hinges. Specify Qhinge type, add $75 list.

Application Notes

Above listed lockers include afinished steel top. Lockers may bespecified without a steel top for usewith an individual or commonlaminate top, specified separately.to specify locker without top,substitute top option character withan ‘‘N’’ and deduct $40 list(Example: VLG421224FDLNSL).

When specified non-locking, lockdrilling is omitted from door front.

Dimensions listed under ’w’, ’h’, ’d’are actual to the nearest 1/6�.

50� and 57� high lockers, 15�, 18�and 24� deep (nominal) requireganging or counterweight forstability. See Locker StabilityRequirements for details.

All lockers 42� and 36� high may beused freestanding.

All lockers 30� deep may be usedfreestanding.

Quoin

36

Page 38: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

LockersFull Door, for use with feet12� Wide

description configurationelevationht. h w d pattern no. P1 P2 P3

Full Height Door, 12�w x 30�d left hand 36� 307/8� 12� 291/4� VLF361230FDLSSL $1,258. $1,321. $1,384.right hand 36� 307/8� 12� 291/4� VLF361230FDRSSL 1,258. 1,321. 1,384.left hand 42� 383/16� 12� 291/4� VLF421230FDLSSL 1,321. 1,387. 1,453.right hand 42� 383/16� 12� 291/4� VLF421230FDRSSL 1,321. 1,387. 1,453.left hand 50� 451/2� 12� 291/4� VLF501230FDLSSL 1,428. 1,499. 1,571.right hand 50� 451/2� 12� 291/4� VLF501230FDRSSL 1,428. 1,499. 1,571.left hand 57� 5213/16� 12� 291/4� VLF571230FDLSSL 1,537. 1,614. 1,691.right hand 57� 5213/16� 12� 291/4� VLF571230FDRSSL 1,537. 1,614. 1,691.

*Shown with feet, specified separtely

Order Information

1. Base Pattern Number2. Lock option

D = Digital Keypad LockL = Cylinder LockN = Non-lockingR = RFID Lock

3. Paint FinishSee Finish Options page

4. Pull styleT = 5� Finger pull

5. Pull finishSee Finish Options page

6. Lock finish

Order Code

Example: VLF421224FDLSSL

VLF Quoin, Locker for Feet42 42� High12 12� Wide24 24� DeepFDL Full Door LeftS Steel TopS Steel Door(L) Cylinder Lock(118) Paint Finish, Bright

White(S) Standard Hinge(T) Pull Style, 5� Finger pull(118) Pull Finish, Bright

White(B) Lock finish, Black

Specific Information

Foot kits not included, must bespecified separately and installedon site.

All lockers 36� high and taller withhinged door include factoryinstalled, dual-prong coat hook andone adjustable shelf installed inlowest shelf position. SeeSpecification Information foradditional shelf positions.

Above listed pattern numbersinclude standard cylinder lock. Foradditional lock options, substitutethe final ‘‘L’’ of pattern number with:N = Non-Locking, deduct $15D = Digital Keypad lock, add $560R = RFID lock, add $605Example (VLG501224FDLSSN).

Lockers for feet do not includeleveling glides.

Lockers for use with feet aredesigned to align with underside ofDividends Horizon panel top capwith foot kits installed.

Lockers with full door are availablewith soft close hinges. Specify Qhinge type, add $75 list.

Application Notes

Above listed lockers include afinished steel top. Lockers may bespecified without a steel top for usewith an individual or commonlaminate top, specified separately.to specify locker without top,substitute top option character withan ‘‘N’’ and deduct $40 list(Example: VLG421224FDLNSL).

When specified non-locking, lockdrilling is omitted from door front.

Dimensions listed under ’w’, ’h’, ’d’are actual to the nearest 1/6�.

50� and 57� high lockers, 15�, 18�and 24� deep (nominal) requireganging or counterweight forstability. See Locker StabilityRequirements for details.

All lockers 42� and 36� high may beused freestanding.

All lockers 30� deep may be usedfreestanding.

Quoin

37

Page 39: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

LockersFull Door, for use with feet15� Wide

description configurationelevationht. h w d pattern no. P1 P2 P3

Full Height Door, 15�w x 15�d left hand 36� 307/8� 15� 1513/16� VLF361515FDLSSL $1,398. $1,468. $1,538.right hand 36� 307/8� 15� 1513/16� VLF361515FDRSSL 1,398. 1,468. 1,538.left hand 42� 383/16� 15� 1513/16� VLF421515FDLSSL 1,454. 1,527. 1,599.right hand 42� 383/16� 15� 1513/16� VLF421515FDRSSL 1,454. 1,527. 1,599.right hand 50� 451/2� 15� 1513/16� VLF501515FDLSSL 1,534. 1,611. 1,687.left hand 50� 451/2� 15� 1513/16� VLF501515FDRSSL 1,534. 1,611. 1,687.left hand 57� 5213/16� 15� 1513/16� VLF571515FDLSSL 1,615. 1,696. 1,777.right hand 57� 5213/16� 15� 1513/16� VLF571515FDRSSL 1,615. 1,696. 1,777.

*Shown with feet, specified separtely

Full Height Door, 15�w x 18�d left hand 36� 307/8� 15� 1813/16� VLF361518FDLSSL 1,440. 1,512. 1,584.right hand 36� 307/8� 15� 1813/16� VLF361518FDRSSL 1,440. 1,512. 1,584.left hand 42� 383/16� 15� 1813/16� VLF421518FDLSSL 1,498. 1,573. 1,648.right hand 42� 383/16� 15� 1813/16� VLF421518FDRSSL 1,498. 1,573. 1,648.left hand 50� 451/2� 15� 1813/16� VLF501518FDLSSL 1,580. 1,659. 1,738.right hand 50� 451/2� 15� 1813/16� VLF501518FDRSSL 1,580. 1,659. 1,738.left hand 57� 5213/16� 15� 1813/16� VLF571518FDLSSL 1,663. 1,746. 1,829.right hand 57� 5213/16� 15� 1813/16� VLF571518FDRSSL 1,663. 1,746. 1,829.

*Shown with feet, specified separtely

Full Height Door, 15�w x 24�d left hand 36� 307/8� 15� 231/4� VLF361524FDLSSL 1,550. 1,627. 1,704.right hand 36� 307/8� 15� 231/4� VLF361524FDRSSL 1,550. 1,627. 1,704.left hand 42� 383/16� 15� 231/4� VLF421524FDLSSL 1,596. 1,676. 1,756.right hand 42� 383/16� 15� 231/4� VLF421524FDRSSL 1,596. 1,676. 1,756.left hand 50� 451/2� 15� 231/4� VLF501524FDLSSL 1,687. 1,771. 1,856.right hand 50� 451/2� 15� 231/4� VLF501524FDRSSL 1,687. 1,771. 1,856.left hand 57� 5213/16� 15� 231/4� VLF571524FDLSSL 1,782. 1,871. 1,960.right hand 57� 5213/16� 15� 231/4� VLF571524FDRSSL 1,782. 1,871. 1,960.

*Shown with feet, specified separtely

Order Information

1. Base Pattern Number2. Lock option

D = Digital Keypad LockL = Cylinder LockN = Non-lockingR = RFID Lock

3. Paint FinishSee Finish Options page

4. Pull styleT = 5� Finger pull

5. Pull finishSee Finish Options page

6. Lock finish

Order Code

Example: VLF421224FDLSSL

VLF Quoin, Locker for Feet42 42� High15 15� Wide24 24� DeepFDL Full Door LeftS Steel TopS Steel Door(L) Cylinder Lock(118) Paint Finish, Bright

White(S) Standard Hinge(T) Pull Style, 5� Finger pull(118) Pull Finish, Bright

White(B) Lock finish, Black

Specific Information

Foot kits not included, must bespecified separately and installedon site.

All lockers 36� high and taller withhinged door include factoryinstalled, dual-prong coat hook andone adjustable shelf installed inlowest shelf position. SeeSpecification Information foradditional shelf positions.

Above listed pattern numbersinclude standard cylinder lock. Foradditional lock options, substitutethe final ‘‘L’’ of pattern number with:N = Non-Locking, deduct $15D = Digital Keypad lock, add $560R = RFID lock, add $605Example (VLG501224FDLSSN).

Lockers for feet do not includeleveling glides.

Lockers for use with feet aredesigned to align with underside ofDividends Horizon panel top capwith foot kits installed.

Lockers with full door are availablewith soft close hinges. Specify Qhinge type, add $75 list.

Application Notes

Above listed lockers include afinished steel top. Lockers may bespecified without a steel top for usewith an individual or commonlaminate top, specified separately.to specify locker without top,substitute top option character withan ‘‘N’’ and deduct $40 list(Example: VLG421224FDLNSL).

When specified non-locking, lockdrilling is omitted from door front.

Dimensions listed under ’w’, ’h’, ’d’are actual to the nearest 1/6�.

50� and 57� high lockers, 15�, 18�and 24� deep (nominal) requireganging or counterweight forstability. See Locker StabilityRequirements for details.

All lockers 42� and 36� high may beused freestanding.

All lockers 30� deep may be usedfreestanding.

Quoin

38

Page 40: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

LockersFull Door, for use with feet15� Wide

description configurationelevationht. h w d pattern no. P1 P2 P3

Full Height Door, 15�w x 30�d left hand 36� 307/8� 15� 291/4� VLF361530FDLSSL $1,674. $1,758. $1,841.right hand 36� 307/8� 15� 291/4� VLF361530FDRSSL 1,674. 1,758. 1,841.left hand 42� 383/16� 15� 291/4� VLF421530FDLSSL 1,741. 1,828. 1,915.right hand 42� 383/16� 15� 291/4� VLF421530FDRSSL 1,741. 1,828. 1,915.left hand 50� 451/2� 15� 291/4� VLF501530FDLSSL 1,848. 1,940. 2,033.right hand 50� 451/2� 15� 291/4� VLF501530FDRSSL 1,848. 1,940. 2,033.left hand 57� 5213/16� 15� 291/4� VLF571530FDLSSL 1,957. 2,055. 2,153.right hand 57� 5213/16� 15� 291/4� VLF571530FDRSSL 1,957. 2,055. 2,153.

*Shown with feet, specified separtely

Order Information

1. Base Pattern Number2. Lock option

D = Digital Keypad LockL = Cylinder LockN = Non-lockingR = RFID Lock

3. Paint FinishSee Finish Options page

4. Pull styleT = 5� Finger pull

5. Pull finishSee Finish Options page

6. Lock finish

Order Code

Example: VLF421224FDLSSL

VLF Quoin, Locker for Feet42 42� High15 15� Wide24 24� DeepFDL Full Door LeftS Steel TopS Steel Door(L) Cylinder Lock(118) Paint Finish, Bright

White(S) Standard Hinge(T) Pull Style, 5� Finger pull(118) Pull Finish, Bright

White(B) Lock finish, Black

Specific Information

Foot kits not included, must bespecified separately and installedon site.

All lockers 36� high and taller withhinged door include factoryinstalled, dual-prong coat hook andone adjustable shelf installed inlowest shelf position. SeeSpecification Information foradditional shelf positions.

Above listed pattern numbersinclude standard cylinder lock. Foradditional lock options, substitutethe final ‘‘L’’ of pattern number with:N = Non-Locking, deduct $15D = Digital Keypad lock, add $560R = RFID lock, add $605Example (VLG501224FDLSSN).

Lockers for feet do not includeleveling glides.

Lockers for use with feet aredesigned to align with underside ofDividends Horizon panel top capwith foot kits installed.

Lockers with full door are availablewith soft close hinges. Specify Qhinge type, add $75 list.

Application Notes

Above listed lockers include afinished steel top. Lockers may bespecified without a steel top for usewith an individual or commonlaminate top, specified separately.to specify locker without top,substitute top option character withan ‘‘N’’ and deduct $40 list(Example: VLG421224FDLNSL).

When specified non-locking, lockdrilling is omitted from door front.

Dimensions listed under ’w’, ’h’, ’d’are actual to the nearest 1/6�.

50� and 57� high lockers, 15�, 18�and 24� deep (nominal) requireganging or counterweight forstability. See Locker StabilityRequirements for details.

All lockers 42� and 36� high may beused freestanding.

All lockers 30� deep may be usedfreestanding.

Quoin

39

Page 41: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

Locker TopsLaminate Tops For 15� deep Lockers

description type w d h pattern no. L1 L2

Locker top, individual locker, 15� deep individual locker top, 12� w 12� 157/8� 15/16� VLTS1215L $210. $240.individual locker top, 15� w 1415/16� 157/8� 15/16� VLTS1515L 215. 245.

Locker top, single run, 15� deep common top for (2) 12�w lockers 237/8� 157/8� 15/16� VLTC2415L 215. 270.common top for (2) 15�w lockers 2913/16� 157/8� 15/16� VLTC3015L 230. 290.common top for (3) 12�w lockers 3513/16� 157/8� 15/16� VLTC3615L 245. 305.common top for (3) 15�w lockers 4411/16� 157/8� 15/16� VLTC4515L 270. 370.common top for (4) 12�w lockers 472/3� 157/8� 15/16� VLTC4815L 282. 380.common top for (4) 15�w / (5) 12�w lockers 599/16� 157/8� 15/16� VLTC6015L 315. 470.common top for (6) 12�w lockers 717/8� 157/8� 15/16� VLTC7215L 337. 540.common top for (5) 15�w lockers 747/16� 157/8� 15/16� VLTC7515L 360. 580.common top for (7) 12�w lockers 833/16� 157/8� 15/16� VLTC8415L 390. 630.common top for (6) 15�w lockers 895/16� 157/8� 15/16� VLTC9015L 430. 670.common top for (8) 12�w lockers 951/8� 157/8� 15/16� VLTC9615L 475. 715.common top for (7) 15�w lockers 1043/16� 157/8� 15/16� VLTC10515L 525. 760.common top for (8) 15�w lockers 1191/16� 157/8� 15/16� VLTC12015L 585. 815.

Locker top, back-to-back run, 30� deep common top for (4) 12�w lockers 237/8� 3111/16� 15/16� VLTB2430L 283. 353.common top for (4) 15�w lockers 2913/16� 3111/16� 15/16� VLTB3030L 332. 416.common top for (6) 12�w lockers 3513/16� 3111/16� 15/16� VLTB3630L 376. 479.common top for (6) 15�w lockers 4511/16� 3111/16� 15/16� VLTB4530L 444. 566.common top for (8) 12�w lockers 472/3� 3111/16� 15/16� VLTB4830L 471. 609.common top for (8) 15�w / (10) 12�w lockers 599/16� 3111/16� 15/16� VLTB6030L 573. 746.common top for (12) 12�w lockers 717/8� 3111/16� 15/16� VLTB7230L 680. 887.common top for (10) 15�w lockers 747/16� 3111/16� 15/16� VLTB7530L 712. 930.common top for (14) 12�w lockers 833/16� 3111/16� 15/16� VLTB8430L 778. 1,010.common top for (12) 15�w lockers 895/16� 3111/16� 15/16� VLTB9030L 842. 1,087.common top for (16) 12�w lockers 951/8� 3111/16� 15/16� VLTB9630L 920. 1,182.common top for (14) 15�w lockers 1043/16� 3111/16� 15/16� VLTB10530L 988. 1,240.common top for (16) 15�w lockers 1191/16� 3111/16� 15/16� VLTB12030L 1,072. 1,319.

Order Information

1. Base Pattern Number2. Laminate Finish

See Finish Options page3. Edge band Finish

Order Code

Example: VLTC3618L

VL Quoin, LockerC Common top, Single Run36 36� Wide18 187/8� DeepL Laminate118 Laminate finish, Bright

White118 Edgeband finish, Bright

White

Specific Information

Ganging kits (VARQ01, VARQ10pattern numbers) are required foruse with VLTC or VLTB commontops, specified separately.

Tops are designed to span amaximum of (8) lockers ofuniformed width side-by-side, flushwith no gap.

VLTB back-to-back tops aredesigned to be used over lockers ofthe same depth, positionedback-to-back flush with no gap.

Application Notes

For use with Quoin lockers with ‘‘notop’’ option only.

Hardware to attach laminate tops isincluded with each ‘‘no top’’ Quoinlocker.

Common locker top design featuresa slight overhang on all 4 sides.

Some locker bank applications mayrequire counterweight for stability.See Locker Stability Requirementsfor details. Counterweights must bespecified separately if required.

Quoin

40

Page 42: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

Locker TopsLaminate Tops For 18� deep Lockers

description type w d h pattern no. L1 L2

Locker top, individual locker, 18� deep individual locker top, 12� w 12� 187/8� 15/16� VLTS1218L $215. $245.individual locker top, 15� w 1415/16� 187/8� 15/16� VLTS1518L 220. 250.

Locker top, single run, 18� deep common top for (2) 12�w lockers 237/8� 187/8� 15/16� VLTC2418L 220. 279.common top for (2) 15�w lockers 2913/16� 187/8� 15/16� VLTC3018L 235. 295.common top for (3) 12�w lockers 3513/16� 187/8� 15/16� VLTC3618L 245. 310.common top for (3) 15�w lockers 4411/16� 187/8� 15/16� VLTC4518L 275. 380.common top for (4) 12�w lockers 472/3� 187/8� 15/16� VLTC4818L 282. 396.common top for (4) 15�w / (5) 12�w lockers 599/16� 187/8� 15/16� VLTC6018L 346. 487.common top for (6) 12�w lockers 717/8� 187/8� 15/16� VLTC7218L 414. 585.common top for (5) 15�w lockers 747/16� 187/8� 15/16� VLTC7518L 440. 625.common top for (7) 12�w lockers 833/16� 187/8� 15/16� VLTC8418L 483. 681.common top for (6) 15�w lockers 895/16� 187/8� 15/16� VLTC9018L 510. 725.common top for (8) 12�w lockers 951/8� 187/8� 15/16� VLTC9618L 545. 770.common top for (7) 15�w lockers 1043/16� 187/8� 15/16� VLTC10518L 570. 820.common top for (8) 15�w lockers 1191/16� 187/8� 15/16� VLTC12018L 605. 875.

Locker top, back-to-back run, 38� deep common top for (4) 12�w lockers 237/8� 372/3� 15/16� VLTB2438L 370. 433.common top for (4) 15�w lockers 2913/16� 372/3� 15/16� VLTB3038L 470. 530.common top for (6) 12�w lockers 3513/16� 372/3� 15/16� VLTB3638L 548. 644.common top for (6) 15�w lockers 4411/16� 372/3� 15/16� VLTB4538L 630. 740.common top for (8) 12�w lockers 472/3� 372/3� 15/16� VLTB4838L 683. 811.common top for (8) 15�w / (10) 12�w lockers 599/16� 372/3� 15/16� VLTB6038L 826. 986.common top for (12) 12�w lockers 717/8� 372/3� 15/16� VLTB7238L 972. 1,165.common top for (10) 15�w lockers 747/16� 372/3� 15/16� VLTB7538L 1,015. 1,215.common top for (14) 12�w lockers 833/16� 372/3� 15/16� VLTB8438L 1,100. 1,300.common top for (12) 15�w lockers 895/16� 372/3� 15/16� VLTB9038L 1,205. 1,420.common top for (16) 12�w lockers 951/8� 372/3� 15/16� VLTB9638L 1,339. 1,564.common top for (14) 15�w lockers 1043/16� 372/3� 15/16� VLTB10538L 1,450. 1,660.common top for (16) 15�w lockers 1191/16� 372/3� 15/16� VLTB12038L 1,600. 1,800.

Order Information

1. Base Pattern Number2. Laminate Finish

See Finish Options page3. Edge band Finish

Order Code

Example: VLTC3618L

VL Quoin, LockerC Common top, Single Run36 36� Wide18 187/8� DeepL Laminate118 Laminate finish, Bright

White118 Edgeband finish, Bright

White

Specific Information

Ganging kits (VARQ01, VARQ10pattern numbers) are required foruse with VLTC or VLTB commontops, specified separately.

Tops are designed to span amaximum of (8) lockers ofuniformed width side-by-side, flushwith no gap.

VLTB back-to-back tops aredesigned to be used over lockers ofthe same depth, positionedback-to-back flush with no gap.

Application Notes

For use with Quoin lockers with ‘‘notop’’ option only.

Hardware to attach laminate tops isincluded with each ‘‘no top’’ Quoinlocker.

Common locker top design featuresa slight overhang on all 4 sides.

Some locker bank applications mayrequire counterweight for stability.See Locker Stability Requirementsfor details. Counterweights must bespecified separately if required.

Quoin

41

Page 43: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

Locker TopsLaminate Tops For 24� deep Lockers

description type w d h pattern no. L1 L2

Locker top, individual locker, 24� deep individual locker top, 12� w 12� 231/4� 15/16� VLTS1224L $220. $250.individual locker top, 15� w 1415/16� 231/4� 15/16� VLTS1524L 225. 255.

Locker top, single run, 24� deep common top for (2) 12�w lockers 237/8� 231/4� 15/16� VLTC2424L 225. 300.common top for (2) 15�w lockers 2913/16� 231/4� 15/16� VLTC3024L 240. 340.common top for (2) 15�w lockers 3513/16� 231/4� 15/16� VLTC3624L 261. 369.common top for (3) 15�w lockers 4411/16� 231/4� 15/16� VLTC4524L 320. 450.common top for (4) 12�w lockers 472/3� 231/4� 15/16� VLTC4824L 330. 475.common top for (4) 15�w / (5) 12�w lockers 599/16� 231/4� 15/16� VLTC6024L 404. 586.common top for (6) 12�w lockers 717/8� 231/4� 15/16� VLTC7224L 485. 701.common top for (5) 15�w lockers 747/16� 231/4� 15/16� VLTC7524L 510. 740.common top for (7) 12�w lockers 833/16� 231/4� 15/16� VLTC8424L 563. 817.common top for (6) 15�w lockers 895/16� 231/4� 15/16� VLTC9024L 600. 865.common top for (8) 12�w lockers 951/8� 231/4� 15/16� VLTC9624L 640. 928.common top for (7) 15�w lockers 1043/16� 231/4� 15/16� VLTC10524L 680. 960.common top for (8) 15�w lockers 1191/16� 231/4� 15/16� VLTC12024L 720. 999.

Locker top, back-to-back, 48� deep common top for (4) 12�w lockers 237/8� 461/2� 15/16� VLTB2448L 419. 496.common top for (4) 15�w lockers 2913/16� 461/2� 15/16� VLTB3048L 520. 605.common top for (6) 12�w lockers 3513/16� 461/2� 15/16� VLTB3648L 622. 739.common top for (6) 15�w lockers 4411/16� 461/2� 15/16� VLTB4548L 730. 870.common top for (8) 12�w lockers 472/3� 461/2� 15/16� VLTB4848L 778. 934.common top for (8) 15�w / (10) 12�w lockers 599/16� 461/2� 15/16� VLTB6048L 946. 1,141.common top for (12) 12�w lockers 717/8� 461/2� 15/16� VLTB7248L 1,118. 1,349.common top for (10) 15�w lockers 747/16� 461/2� 15/16� VLTB7548L 1,200. 1,420.common top for (14) 12�w lockers 833/16� 461/2� 15/16� VLTB8448L 1,375. 1,580.common top for (12) 15�w lockers 895/16� 461/2� 15/16� VLTB9048L 1,440. 1,700.common top for (16) 12�w lockers 951/8� 461/2� 15/16� VLTB9648L 1,530. 1,840.common top for (14) 15�w lockers 1043/16� 461/2� 15/16� VLTB10548L 1,620. 1,960.common top for (16) 15�w lockers 1191/16� 461/2� 15/16� VLTB12048L 1,730. 2,100.

Order Information

1. Base Pattern Number2. Laminate Finish

See Finish Options page3. Edge band Finish

Order Code

Example: VLTC3618L

VL Quoin, LockerC Common top, Single Run36 36� Wide18 187/8� DeepL Laminate118 Laminate finish, Bright

White118 Edgeband finish, Bright

White

Specific Information

Ganging kits (VARQ01, VARQ10pattern numbers) are required foruse with VLTC or VLTB commontops, specified separately.

Tops are designed to span amaximum of (8) lockers ofuniformed width side-by-side, flushwith no gap.

VLTB back-to-back tops aredesigned to be used over lockers ofthe same depth, positionedback-to-back flush with no gap.

Application Notes

For use with Quoin lockers with ‘‘notop’’ option only.

Hardware to attach laminate tops isincluded with each ‘‘no top’’ Quoinlocker.

Common locker top design featuresa slight overhang on all 4 sides.

Some locker bank applications mayrequire counterweight for stability.See Locker Stability Requirementsfor details. Counterweights must bespecified separately if required.

Quoin

42

Page 44: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

Locker TopsLaminate Tops For 30� deep Lockers

description type w d h pattern no. L1 L2

Locker top, individual locker, 30� deep individual locker top, 12� w 12� 291/4� 15/16� VLTS1230L $225. $255.individual locker top, 15� w 1415/16� 291/4� 15/16� VLTS1530L 230. 265.

Locker top, single run, 30� deep common top for (3) 15�w lockers 237/8� 291/4� 15/16� VLTC2430L 283. 353.common top for (2) 15�w lockers 2913/16� 291/4� 15/16� VLTC3030L 332. 416.common top for (3) 12�w lockers 3513/16� 291/4� 15/16� VLTC3630L 376. 479.common top for (3) 15�w lockers 4411/16� 291/4� 15/16� VLTC4530L 444. 566.common top for (4) 12�w lockers 472/3� 291/4� 15/16� VLTC4830L 471. 609.common top for (4) 15�w / (5) 12�w lockers 599/16� 291/4� 15/16� VLTC6030L 573. 746.common top for (6) 12�w lockers 717/8� 291/4� 15/16� VLTC7230L 680. 887.common top for (5) 15�w lockers 747/16� 291/4� 15/16� VLTC7530L 712. 930.common top for (7) 12�w lockers 833/16� 291/4� 15/16� VLTC8430L 778. 1,010.common top for (6) 15�w lockers 895/16� 291/4� 15/16� VLTC9030L 842. 1,087.common top for (8) 12�w lockers 951/8� 291/4� 15/16� VLTC9630L 920. 1,182.common top for (7) 15�w lockers 1043/16� 291/4� 15/16� VLTC10530L 988. 1,240.common top for (8) 15�w lockers 1191/16� 291/4� 15/16� VLTC12030L 1,072. 1,319.

Locker top, back-to-back, 60� deep common top for (4) 12�w lockers 237/8� 581/2� 15/16� VLTB2460L 515. 570.common top for (4) 15�w lockers 2913/16� 581/2� 15/16� VLTB3060L 700. 720.common top for (6) 12�w lockers 3513/16� 581/2� 15/16� VLTB3660L 835. 919.common top for (6) 15�w lockers 4411/16� 581/2� 15/16� VLTB4560L 940. 1,030.common top for (8) 12�w lockers 472/3� 581/2� 15/16� VLTB4860L 1,036. 1,147.common top for (8) 15�w / (10) 12�w lockers 599/16� 581/2� 15/16� VLTB6060L 1,248. 1,386.common top for (12) 12�w lockers 717/8� 581/2� 15/16� VLTB7260L 1,459. 1,629.common top for (10) 15�w lockers 747/16� 581/2� 15/16� VLTB7560L 1,520. 1,690.common top for (14) 12�w lockers 833/16� 581/2� 15/16� VLTB8460L 1,637. 1,783.common top for (12) 15�w lockers 895/16� 581/2� 15/16� VLTB9060L 1,810. 1,975.common top for (16) 12�w lockers 951/8� 581/2� 15/16� VLTB9660L 2,038. 2,200.common top for (14) 15�w lockers 1043/16� 581/2� 15/16� VLTB10560L 2,220. 2,360.common top for (16) 15�w lockers 1191/16� 581/2� 15/16� VLTB12060L 2,480. 2,601.

Order Information

1. Base Pattern Number2. Laminate Finish

See Finish Options page3. Edge band Finish

Order Code

Example: VLTC3618L

VL Quoin, LockerC Common top, Single Run36 36� Wide18 187/8� DeepL Laminate118 Laminate finish, Bright

White118 Edgeband finish, Bright

White

Specific Information

Ganging kits (VARQ01, VARQ10pattern numbers) are required foruse with VLTC or VLTB commontops, specified separately.

Tops are designed to span amaximum of (8) lockers ofuniformed width side-by-side, flushwith no gap.

VLTB back-to-back tops aredesigned to be used over lockers ofthe same depth, positionedback-to-back flush with no gap.

Application Notes

For use with Quoin lockers with ‘‘notop’’ option only.

Hardware to attach laminate tops isincluded with each ‘‘no top’’ Quoinlocker.

Common locker top design featuresa slight overhang on all 4 sides.

Some locker bank applications mayrequire counterweight for stability.See Locker Stability Requirementsfor details. Counterweights must bespecified separately if required.

Quoin

43

Page 45: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

Lockers AccessoriesShelf Kits and Worksurface Brackets

description type w(nom.) d(nom.) pattern no. P1 P2 P3

Locker shelf kits, 12� wide Single shelf kit 12� 15� VALS121501 $95. $100. $105.Bulk 10 shelf kit 12� 15� VALS121510 840. 882. 924.Single shelf kit 12� 18� VALS121801 100. 105. 110.Bulk 10 shelf kit 12� 18� VALS121810 890. 935. 979.Single shelf kit 12� 24� VALS122401 110. 116. 121.Bulk 10 shelf kit 12� 24� VALS122410 1,000. 1,050. 1,100.Single shelf kit 12� 30� VALS123001 125. 131. 138.Bulk 10 shelf kit 12� 30� VALS123010 1,150. 1,208. 1,265.

Locker shelf kits, 15� wide Single shelf kit 15� 15� VALS151501 105. 110. 116.Bulk 10 shelf kit 15� 15� VALS151510 940. 98. 1,034.Single shelf kit 15� 18� VALS151801 115. 121. 127.Bulk 10 shelf kit 15� 18� VALS151810 1,040. 1,092. 1,144.Single shelf kit 15� 24� VALS152401 128. 134. 141.Bulk 10 shelf kit 15� 24� VALS152410 1,180. 1,239. 1,298.Single shelf kit 15� 30� VALS153001 145. 152. 160.Bulk 10 shelf kit 15� 30� VALS153010 1,350. 1,418. 1,485.

Locker Worksurface Mount Bracket Bracket for 18� deep locker 18� VARWLB01 45. 47. 50.Bracket for 24� deep locker 24� VARWLB02 55. 58. 61.Bracket for 30� deep locker 30� VARWLB03 75. 79. 83.

Order Information

1. Base Pattern Number2. Paint Finish

See Finish Options page

Order Code

Example: VALS121501

VA Quoin, AccessoryLS Locker Shelf12 12� Wide15 15� Deep01 Single shelf kit(118) Paint Finish, Bright

White

Specification Information

Locker shelf kits are available in allcore paint options to match orcontrast locker units as desired.

All locker shelf kits includeappropriate cantilever brackets forinstallation. When specifiedseparately, shelf kits are fieldinstalled.

Locker worksurface mount bracketsinclude a 2-piece bracket set andattachment hardware.

Worksurface mount bracketapplication requires visible bracketmounted within locker. Specifyingbracket in finish to match lockercase is recommended.

Application Notes

Lockers with full door include (1)adjustable shelf, standard. Openlockers without door include 1 to 3shelves depending on locker height.Above shelf kits may be specifiedwhen additional shelves arerequired.

Locker shelves may only beinstalled in pre-determinedlocations. See SpecificationInformation for shelf positiondetails.

Locker worksurface mount bracketsmay be used to support one end of afixed Dividends Horizonworksurface.

Worksurface mount bracketapplications require locker andworksurface to be of uniformeddepth.

Worksurface mount bracketapplication satisfies locker stabilityrequirements.

Worksurface mount bracket requiresfield drilling through locker sidepanel.

Quoin

44

Page 46: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

Lockers AccessoriesAccessories

description type pattern no. list

Dual Prong Coat Hook Kit Top mount VACHD01 $36.

Locker Coat Rod Kit for 12� wide locker VACRTM12 75.for 15� wide locker VACRTM15 85.

Panel Attachment Bracket Left hand VARDL01 37.Right hand VARDR01 37.

Locker to Credenza Ganging Kit Kit for single connection VARS01 52.

Locker to Locker Ganging Kit Bulk kit, 10 connections VARQ10 425.Kit for single connection VARQ01 45.

Order Information

1. Base Pattern Number2. Paint Finish

See Finish Options page

Order Code

VACHD01 Nickel platedVARDR01 BlackVARDL01 BlackVARS01 Galvanized steelVARQ01 Galvanized steelVACR-TM12

Chrome

VACR-TM15

Chrome

Specification Information

Dual prong coat hook and coat rodkit includes hook with attachmentscrews for steel or laminate top.

Panel attachment bracket kitsinclude 2 brackets designed toengage with Dividends Horizonpanel providing additional stabilityto the locker. Specify one kit perlocker to panel attachment.

Locker to credenza ganging kitincludes 2 brackets and connectionhardware allowing one locker to beconnected to one credenza or Series2 doublewide to provide additionalstability to locker.

VARQ01 kits includes 2 bracketsand connection hardware to join 2Quoin lockers. VARQ10 includes20 brackets and connectionhardware required for 10 lockerconnections.

VARQ01 or VARQ10 must bespecified when ganging lockerswith VALTC.. or VALTB.. commonlaminate tops.

Application Notes

Lockers with full hinged doorinclude one factory installed coathook, standard. VACHD01 coathook may be specified whenadditional hooks are required or foruse within open lockers withoutdoor. When specified separately,coat hooks are field installed.

Full width locker coat rod kitsaccommodate clothing hangers asfollows:15� deep locker: will notaccommodate clothing hangers18� deep locker: accommodateshangers up to 17� wide24-30� deep lockers: accommodateall standard or oversized clothinghangers up to 19� wideWhen specified, locker coat rod isdesigned to replace coat hook, coatrod may not be used together withcoat hook(s). Coat rods are fieldinstalled.

Handedness of panel attachmentbracket set is determined byviewing locker from the front.

See locker Specification Informationfor specific stabilityrecommendations.

Quoin

45

Page 47: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

Lockers AccessoriesCounterweight Kits

description type w weight pattern no. list

Locker Counterweight Kit for 12� wide Locker 15� deep locker 12� 10 lbs VALCW1210 $160.15� deep locker 12� 20 lbs VALCW1220 265.18-30� deep locker 12� 12 lbs VALCW1212 160.18-30� deep locker 12� 23 lbs VALCW1223 265.

Locker Counterweight Kit for 15� wide Locker 15� deep locker 13� 15 lbs VALCW1513 185.15� deep locker 26� 15 lbs VALCW1526 315.18-30� deep locker 15� 15 lbs VALCW1515 185.18-30� deep locker 15� 30 lbs VALCW1530 315.

Order Information

1. Base Pattern Number

Order Code

Example: VALCW1223

VA Quoin, AccessoryLCW Locker Counterweight

Kit12 12� wide23 23 lbs.

Specific Information

Quoin lockers may requireadditional stability when used infreestanding applications. Stabilitymay be provided by various gangingmethods or with counterweight kit.

See published SpecificationInformation for stability guidelines.

Counterweight kits are specifiedseparately and field installed.

Application Notes

Counterweight kits includemounting hardware and brackets toinstall the counterweight plates.

Locker counterweights are installedbeneath the unit.

Locker counterweight kits areintended for Quoin lockers and maynot be used for Quoin credenzas.

Quoin

46

Page 48: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

Digital Keypad and RFID Lock Specifications

Digital Keypad lock RFID lock

ApplicationQuoin lockers with Digital Keypad or RFID lockoptions support applications where units areshared by multiple users providing a securestorage alternative to a standard key lock. Thiselminates the use of a standard key which caneasily be misplaced or taken offsite.

The Digital Keypad lock option requires input ofa user-selected 4-digit code while the RFID lockoperates when the user presents a compatibleRIFD card to the lock. To operate, the user mustpress the C or Key button depending on lock type,enter code or present RFID card, then press theKey button again to lock or unlock the unit.

If an RFID credential is lost or a code isforgotten, a Manager Key (specified separately)can be used to bypass the lost or forgottencredential and unlock the unit. In situationswhere a user is unable to operate the keypad orRFID reader, a User Key (specifed separately)can be utilized to override code input or RFIDrequirement, allowing the lock to comply withADA requirements.

Each installation site with Digital Keypad orRFID lock requires one Programming Key andat least one Manager Key, specified separately.

All Digital Keypad and RFID locks are shippedprogram-ready for Shared Use mode. Initialsetup is required on-site prior to use. SeeKeyless Locking Guide for procedure details.

To operate in Shared Use mode, the user willselect an unused unit, place their items withinand follow the locking procedure. Once theiritems are retrieved, the lock will remain unlockeduntil it is locked by the next user. Locks may beconverted to Assigned Use mode in which thelock remains locked until accessed by assigneduser(s).

To convert an RFID lock to Assigned Use mode,an Assigned Use Reset Key must be used. ResetKey expires 6 weeks from date of order.

To convert Digital Keypad lock to Assigned Usemode, follow the sequence listed within theappropriate User Guide.

Specifications and Features• Brushed Nickel finish• Vertical body orientation• Recessed-mount, factory installed• All metal lock housing• Automatic (motorized) 1/2� dead bolt• Powered by 4 premium AA batteries (included)• Duracell CopperTop or Energizer brand

batteries required. Rechargeable batteries arenot recommended.

• Shared Use Mode is default, locks may beconverted to Assigned Use Mode

• Tamper guard• Audible and visible usage indicators• Lock can be bypassed with a Manager Key if

code is forgotten, RFID credential is lost or incase of battery failure.

• LED usage indicator prompts the lock’s LED toflash when the unit is locked, indicating thelocker is in use. The default setting for thisfeature is ON, however the LED usageindicator can be turned off for Digital Keypadlocks at any time by following the procedurelisted in the user guide.

• Typical battery life is 3-5 years (based onlength of usage). Turning the LED usageindicator feature off extends battery life.

Digital Keypad Lock• Operated with a user-selected 4-digit code

To specify a locker or pedestal with a DigitalKeypad lock, select ‘‘D’’ in the pattern number forthe lock option. Example: VLG421224FDLSS(D)- Locker with full door 42H x 12W x 24D, steeldoor, steel top, Digital Keypad lock. Whenspecified, Digital Keypad lock is factoryinstalled. Instructions for programming areincluded.

RFID Lock• Operated with a compatible RFID Card or

employee badge.• Knoll RFID locks operate on 13.56 MHz

frequency with both iClass (ISO 15693) andMifare (ISO 14443).

To specify a locker or pedestal with a RFID lock,select ‘‘R’’ in the pattern number for the lockoption. Example VLG421224FDLSS(R) - Lockerwith full door 42H x 12W x 24D, steel door, steeltop, RFID lock. When specified, RFID lock isfactory installed. Instructions for programmingare included.

User Key• User Keys allow ADA access to Digital Keypad

or RFID locks for users unable to operate thekeypad or RFID reader.

• User Keys are used by touching key to prongsof the lock to lock and unlock the unit.

Manager Key• Manager Key is used to bypass a locked unit.• Manager Keys are registered to locks using the

Programming Key.• Up to (6) Manager Keys may be registered to

each lock. This allows the client to design alock system that suits their management accessrequirements.

• Additional Manager Key(s) may be registeredto a lock without erasing previously registeredManager Keys.

• Provides external power in case of batteryfailure.

Programming Key• The Programming Key is a communication

device used to initialize locks out of factorydefault mode and to register Manager Keys tothe locks. It is used to transfer, but not storeinformation.

• Only one Programming Key should bespecified per installation site. MultipleProgramming Keys cannot be used inconjuction with each other.

• Add-on or phased orders for Digital Keypad orRFID locks should be initialized andprogrammed using the original ProgrammingKey.

• Used to turn on/off Digital Keypad lockfeatures such as LED usage indicator and autounlock.

• Provides external power in case of batteryfailure.

• If a programming key is lost, a ReplacementProgramming Key may be ordered but theoriginal Programming Key will becomeobsolete.

programming key (yellow) user key (black)

manager key (black)

Quoin

47

Page 49: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

Digital Keypad and RFID Lock Specifications

Calculating the total number of manager keysThe Digital Keypad and RFID lock systems are flexible, allowing the client to choose the number of manager keys required. Solutions may range from simple tocomplex, depending on client needs. It may be helpful to create a chart to organize and calculate the number of manager keys required, similar to the examplesshown below.

Considerations:• If units will be located on different floors, consider ordering keys that can be registered to bypass all locks as a floor-specific ‘‘master key’’.• It units will be located within different zones or areas, consider ordering keys that can be registered to locks within specific zones on each floor.• If the client would like to create a ‘‘master key’’, one or more manager keys can be registered to all locks to act as a ‘‘master key’’.• Only one Programming Key is required per site regardless of total number of locks or Manager Keys.

Manager key count examplesSample project is a three story space, each floor is divided into three zones containing a varied number of lockers. Example 1 is a simple lock system showingtwo manager keys registered to all locks, regardless of floor or zone. Example 2 is a more complex solution showing manager keys registered to locks in a layeredapproach. At the lowest management level, keys are registered specific to zone, followed by keys that are floor-specific and at the top level, keys are registered toall locks to be used as overall master keys.The manager key counts shown in the examples are sample numbers; the ratio of manager keys to the number of locks is decided by the client.

Example 1:Two (2) manager keys registered to all locks throughout the space. No manager keys registered specific to floor or zone.

Example 2:• Manager keys registered to all locks within each specific zone on each floor. Number of manager keys is decided by client. Once registered, these manager

keys may be used to bypass any lock within that zone on that floor, but will not be able to bypass any of the other units.• One (1) manager key for each floor registered to all locks in all zones on that floor, used as first, second and third floor ‘‘master keys’’.• Two (2) manager keys registered to all locks, in all zones on all floors used as ‘‘overall master keys’’.

Quoin

48

Page 50: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

Keyless Locking AccessoriesAccessories

description finish pattern no. list

Manager Key for digital keypad and RFID lock black VADKEYM $198.

Programming Key for digital keypad and RFIDlock

yellow VADKEYP 272.

User Key for digital keypad and RFID lock black VADKEYU 88.

Reset Key, Shared Use Mode yellow VADKEYR 301.

Reset Key, Assigned Use Mode, Automatic Lock yellow VADKEYV 301.

Replacement Programming Key yellow VADKEYZ 301.

Order Information Order Code Specification Information

Programming and manager key(s)must be specified with digitalkeypad or RFID locks. Seespecification page for furtherdetails.

User key is an optional keyavailable for users who are unable touse a keypad or card readerfunction, allowing the lock tocomply with ADA requirements.User key is not required to usedigital keypad or RFID lock system.

Reset key is an optional key whenrestoring lock to factory settings isdesired. Using a reset key will eraseall programming includingprogramming key, manager key(s)and user credentials if applicable.

Application Notes

VADKEYR is used to reset anydigital keypad or RFID lock toshared use mode.

VADKEYV is used to reset digitalkeypad or RFID locks to assigneduse mode.

Reset key is required whenconverting RFID lock from standardshared use mode to assigned usemode.

Quoin

49

Page 51: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

Wall Mounting Suggestions The following information is provided only as a guide, and represents minimum recommendations only. Knoll does not accept responsibility for the attachment of any Knoll product to a Customer’s site wall. Wall specification/construction is the responsibility of the Customer and its structural engineer/architect. Failure to properly attach Knoll products to adequate wall structures can lead to property damage and/or personal injury.

You should consult your own structural engineers and/or architects and must not rely on the information provided herein.

It is the responsibility of the Customer and its structural engineers/architects to verify that the permanent structural walls (studs, blocks, solid masonry, etc.) on which the Knoll products are intended to be mounted are designed appropriately to support the product weight, PLUS 3 lbs. per linear inch for each useable shelf length

NOTE: A cabinet’s top is considered a “useable shelf” and MUST be included in the calculation of the total load for an overhead cabinet.

It is the responsibility of the Customer and its structural engineer/architects to specify the fasteners and method for attaching the Knoll supplied wall mounting cleat, bracket, frame, etc. to the supporting wall and to confirm that the installers have adhered to these specifications. For all local building standards and codes, and additional requirements (including, but not limited to, seismic conditions) the Customer should always consult local code agencies.

Wall Mounting of Knoll Products Quoin

50

Page 52: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

NEW CONSTRUCTION

Cinder Block or Poured Concrete Masonry Wall

Wood Stud Wall, the studs being FULL HEIGHT to the roof/floor above

Wood Stud Wall, the studs being only Ceiling Height

Steel Stud Wall, the studs being FULL HEIGHT to the roof/floor above

Steel Stud Wall, the studs being only Ceiling Height

Stud Specification

Wood studs, grade #2 or better, 3 1/2" minimum width, OR Metal studs, minimum 25 gage thickness, 3 5/8" minimum width

The wall must be a minimum of 6" thick, and must be full height to the roof/floor structure above

Wood studs must be Grade #2, or better, 3 1/2" minimum width

Wood studs must be Grade #2, or better, 3 1/2" minimum width

Metal studs must be minimum 25 gage thickness, 3 5/8" minimum width

Metal studs must be minimum 25 gage thickness, 3 5/8" minimum width

Stud Centers

Metal and wood studs must be spaced at 16" c/c maximum

N/A Wood studs must be spaced at 16" c/c maximum

Wood studs must be spaced at 16"" c/c maximum"

Metal studs must be spaced at 16" c/c maximum

Metal studs must be spaced at 16" c/c maximum

Stud Height

Metal and wood studs must extend upwards, and be securely attached to the roof/floor structure above

Wood studs must be braced above the ceiling, and be securely attached to the roof/floor structure above

Affix #2 grade 'cap' across the top of the studs, then place diagonal studs from the top cap up to underside of the roof/floor structure above

Metal studs must be braced above the ceiling, and be securely attached to the roof/floor structure above

Affix metal bracing 'cap' across the top of the studs, then place diagonal studs from the top cap up to underside of the roof / floor structure above

Mounting the Knoll Supplied Cleat, Bracket, Frame, etc*

Insert a 2" X 6" wood block, #2 grade or better, [or a DanbackTM flexible wood backing system] horizontally between each of the studs to accommodate the full width of the cabinet, and beyond to the next stud.

Fasten the wood block to each stud using three screws at the ends of each block. (Fasten the Danback™ as directed by the manufacturer)

Fasten the Knoll supplied wall mounting cleat, bracket, frame, etc directly to each wood block every 6"

For wall mounting structures that have a rectangular frame-like configuration: fasten the top horizontal element of the frame to the wood blocking every 6", and fasten the lower horizontal element to each wall stud, using one fastener per stud.

Fasten the Knoll supplied cabinet wall mounting cleat, bracket, frame, etc. directly to the masonry wall every 6"

For wall mounting structures that have a rectangular frame-like configuration: fasten the top horizontal element of the frame to the wall every 6", and fasten the lower horizontal element to the wall every 16"

In the desired location of the cabinet mounting rail, remove an 8" high section of drywall the width of the cabinet, and beyond to the next stud.

Insert a 2" X 6" wood block, #2 grade or better, horizontally between each of the exposed studs.

Fasten the wood block to each stud using three screws at the ends of each block.

Replace the drywall and repair as desired.

Fasten the Knoll supplied wall mounting cleat, rail, frame, etc directly to the wood block every 6"

For wall mounting structures that have a rectangular frame-like configuration: fasten the top horizontal element of the frame to the wood blocking every 6", and fasten the lower horizontal element to each wall stud, using one fastener per stud.

In the desired location of the cabinet mounting rail, remove an 8" high section of drywall the width of the cabinet, and beyond to the next stud.

Insert a 2" X 6" wood block, #2 grade or better, horizontally between each of the exposed studs.

Fasten the wood block to each stud using three screws at the ends of each block.

Replace the drywall and repair as desired.

Fasten the Knoll supplied wall mounting cleat, rail, frame, etc directly to the wood block every 6"

For wall mounting structures that have a rectangular frame-like configuration: fasten the top horizontal element of the frame to the wood blocking every 6", and fasten the lower horizontal element to each wall stud, using one fastener per stud.

In the desired location of the cabinet mounting rail, remove an 8" high section of drywall the width of the cabinet, and beyond to the next stud.

Insert a 2" X 6" wood block, #2 grade or better, [or a Danback™ flexible wood backing system] horizontally between each of the exposed studs.

Fasten the wood block to each stud using three screws at the ends of each block.

Replace the drywall and repair as desired.

Fasten the Knoll supplied wall mounting cleat, rail, frame, etc directly to the wood block every 6"

For wall mounting structures that have a rectangular frame-like configuration: fasten the top horizontal element of the frame to the wood blocking every 6", and fasten the lower horizontal element to each wall stud, using one fastener per stud.

In the desired location of the cabinet mounting rail, remove an 8" high section of drywall the width of the cabinet, and beyond to the next stud.

Insert a 2" X 6" wood block, #2 grade or better, [or a Danback™ flexible wood backing system] horizontally between each of the exposed studs.

Fasten the wood block to each stud using three screws at the ends of each block.

Replace the drywall and repair as desired.

Fasten the Knoll supplied wall mounting cleat, rail, frame, etc directly to the wood block every 6"

For wall mounting structures that have a rectangular frame-like configuration: fasten the top horizontal element of the frame to the wood blocking every 6", and fasten the lower horizontal element to each wall stud, using one fastener per stud.

*Graham Wall Hung Shelf

The Graham Wall Hung Shelf Bracket (and others like it) requires full support behind the full height of the bracket

This should be accomplished by insertion of additional 2"X 6" wood blocking between the studs as defined above

Fasten the Knoll supplied wall mounting brackets directly to the masonry wall, using the holes provided in each bracket

The Graham Wall Hung Shelf Bracket (and others like it) requires full support behind the full height of the bracket

This should be accomplished by insertion of additional 2"X 6" wood blocking between the studs as defined above

The Graham Wall Hung Shelf Bracket (and others like it) requires full support behind the full height of the bracket

This should be accomplished by insertion of additional 2"X 6" wood blocking between the studs as defined above

The Graham Wall Hung Shelf Bracket (and others like it) requires full support behind the full height of the bracket

This should be accomplished by insertion of additional 2"X 6" wood blocking between the studs as defined above

The Graham Wall Hung Shelf Bracket (and others like it) requires full support behind the full height of the bracket

This should be accomplished by insertion of additional 2"X 6" wood blocking between the studs as defined above

Fasten the Knoll supplied wall cleat with...

#10 x 2 1/2" Grabber Woodys Screws or equiv. @ 6" c/c, screwed directly into the wood blocking

3/16" x 3 1/2" Tapcon Masonry Screws or equiv. @ 6" c/c with

1-1/4" embedment, screwed directly into the masonry wall

#10 x 2 1/2" Grabber Woodys Screws or equiv. @ 6" c/c, screwed directly into the wood blocking

#10 x 2 1/2" Grabber Woodys Screws or equiv. @ 6" c/c, screwed directly into the wood blocking

#10 x 2 1/2" Grabber Woodys Screws or equiv. @ 6" c/c, screwed directly into the wood blocking

#10 x 2 1/2" Grabber Woodys Screws or equiv. @ 6" c/c, screwed directly into the wood blocking

EXISTING CONSTRUCTION

Wall Mounting of Knoll Products Quoin

51

Page 53: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

pattern no. page

V2G221818OSL 16

V2G222418OSL 16

V2G223018BFLSL 17

V2G223018OSL 16

V2G223618BFLSL 17

V2G223618O18O18L 16

V2G223618OSL 16

V2G224218O24O18L 16

V2G224818B30O18LSL 17

V2G224818O24O24L 16

V2G224818O30O18L 16

V2G225418B30O24LSL 17

V2G225418B36O18LSL 17

V2G225418O30O24L 16

V2G225418O36O18L 16

V2G226018B30B30LSL 17

V2G226018B30O30LSL 17

V2G226018B36O24LSL 17

V2G226018O30O30L 16

V2G226018O36O24L 16

V2G226618B30O36LSL 17

V2G226618B36B30LSL 17

V2G226618B36O30LSL 17

V2G226618O36O30L 16

V2G227218B36B36LSL 17

V2G227218B36O36LSL 17

V2G227218O36O36L 16

VA2CW3015 19

VA2CW3020 19

VA2CW3025 19

VA2CW3030 19

VA2CW3035 19

VA2CW3040 19

VA2CW3615 19

VA2CW3620 19

VA2CW3625 19

VA2CW3630 19

VA2CW3635 19

VA2CW3640 19

VA2GB01 18

VA2GB10 18

VA2LX04 18

VA2LX100 18

VA2LX20 18

VACHD01 45

VACRTM12 45

VACRTM15 45

VACS22P 18

VADKEYM 49

VADKEYP 49

VADKEYR 49

VADKEYU 49

VADKEYV 49

VADKEYZ 49

VAFC04P 6

VAFC40P 6

VAFT02P 6

VAFT20P 6

VALCW1210 46

VALCW1212 46

VALCW1220 46

pattern no. page

VALCW1223 46

VALCW1513 46

VALCW1515 46

VALCW1526 46

VALCW1530 46

VALS121501 44

VALS121510 44

VALS121801 44

VALS121810 44

VALS122401 44

VALS122410 44

VALS123001 44

VALS123010 44

VALS151501 44

VALS151510 44

VALS151801 44

VALS151810 44

VALS152401 44

VALS152410 44

VALS153001 44

VALS153010 44

VARDL01 45

VARDR01 45

VARQ01 45

VARQ10 45

VARS01 45

VARWLB01 44

VARWLB02 44

VARWLB03 44

VLF281215FDLNSL 24

VLF281215FDRNSL 24

VLF281215OSN 24

VLF281218FDLNSL 24

VLF281218FDRNSL 24

VLF281218OSN 24

VLF281224FDLNSL 24

VLF281224FDRNSL 24

VLF281224OSN 24

VLF281230FDLNSL 24

VLF281230FDRNSL 24

VLF281230OSN 24

VLF281515FDLNSL 25

VLF281515FDRNSL 25

VLF281515OSN 25

VLF281518FDLNSL 25

VLF281518FDRNSL 25

VLF281518OSN 25

VLF281524FDLNSL 25

VLF281524FDRNSL 25

VLF281524OSN 25

VLF281530FDLNSL 25

VLF281530FDRNSL 25

VLF281530OSN 25

VLF361215FDLSSL 36

VLF361215FDRSSL 36

VLF361215OSS 32

VLF361218FDLSSL 36

VLF361218FDRSSL 36

VLF361218OSS 32

VLF361224FDLSSL 36

VLF361224FDRSSL 36

pattern no. page

VLF361224OSS 32

VLF361230FDLSSL 37

VLF361230FDRSSL 37

VLF361230OSS 33

VLF361515FDLSSL 38

VLF361515FDRSSL 38

VLF361515OSS 34

VLF361518FDLSSL 38

VLF361518FDRSSL 38

VLF361518OSS 34

VLF361524FDLSSL 38

VLF361524FDRSSL 38

VLF361524OSS 34

VLF361530FDLSSL 39

VLF361530FDRSSL 39

VLF361530OSS 35

VLF421215FDLSSL 36

VLF421215FDRSSL 36

VLF421215OSS 32

VLF421218FDLSSL 36

VLF421218FDRSSL 36

VLF421218OSS 32

VLF421224FDLSSL 36

VLF421224FDRSSL 36

VLF421224OSS 32

VLF421230FDLSSL 37

VLF421230FDRSSL 37

VLF421230OSS 33

VLF421515FDLSSL 38

VLF421515FDRSSL 38

VLF421515OSS 34

VLF421518FDLSSL 38

VLF421518FDRSSL 38

VLF421518OSS 34

VLF421524FDLSSL 38

VLF421524FDRSSL 38

VLF421524OSS 34

VLF421530FDLSSL 39

VLF421530FDRSSL 39

VLF421530OSS 35

VLF501215FDLSSL 36

VLF501215FDRSSL 36

VLF501215OSS 32

VLF501218FDLSSL 36

VLF501218FDRSSL 36

VLF501218OSS 32

VLF501224FDLSSL 36

VLF501224FDRSSL 36

VLF501224OSS 32

VLF501230FDLSSL 37

VLF501230FDRSSL 37

VLF501230OSS 33

VLF501515FDLSSL 38

VLF501515FDRSSL 38

VLF501515OSS 34

VLF501518FDLSSL 38

VLF501518FDRSSL 38

VLF501518OSS 34

VLF501524FDLSSL 38

VLF501524FDRSSL 38

VLF501524OSS 34

pattern no. page

VLF501530FDLSSL 39

VLF501530FDRSSL 39

VLF501530OSS 35

VLF571215FDLSSL 36

VLF571215FDRSSL 36

VLF571215OSS 32

VLF571218FDLSSL 36

VLF571218FDRSSL 36

VLF571218OSS 32

VLF571224FDLSSL 36

VLF571224FDRSSL 36

VLF571224OSS 32

VLF571230FDLSSL 37

VLF571230FDRSSL 37

VLF571230OSS 33

VLF571515FDLSSL 38

VLF571515FDRSSL 38

VLF571515OSS 34

VLF571518FDLSSL 38

VLF571518FDRSSL 38

VLF571518OSS 34

VLF571524FDLSSL 38

VLF571524FDRSSL 38

VLF571524OSS 34

VLF571530FDLSSL 39

VLF571530FDRSSL 39

VLF571530OSS 35

VLG281215FDLNSL 22

VLG281215FDRNSL 22

VLG281215OSN 22

VLG281218FDLNSL 22

VLG281218FDRNSL 22

VLG281218OSN 22

VLG281224FDLNSL 22

VLG281224FDRNSL 22

VLG281224OSN 22

VLG281230FDLNSL 22

VLG281230FDRNSL 22

VLG281230OSN 22

VLG281515FDLNSL 23

VLG281515FDRNSL 23

VLG281515OSN 23

VLG281518FDLNSL 23

VLG281518FDRNSL 23

VLG281518OSN 23

VLG281524FDLNSL 23

VLG281524FDRNSL 23

VLG281524OSN 23

VLG281530FDLNSL 23

VLG281530FDRNSL 23

VLG281530OSN 23

VLG361215FDLSSL 28

VLG361215FDRSSL 28

VLG361215OSS 26

VLG361218FDLSSL 28

VLG361218FDRSSL 28

VLG361218OSS 26

VLG361224FDLSSL 28

VLG361224FDRSSL 28

VLG361224OSS 26

VLG361230FDLSSL 29

Alpha-Numeric Index

52

Page 54: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

pattern no. page

VLG361230FDRSSL 29

VLG361230OSS 26

VLG361515FDLSSL 30

VLG361515FDRSSL 30

VLG361515OSS 27

VLG361518FDLSSL 30

VLG361518FDRSSL 30

VLG361518OSS 27

VLG361524FDLSSL 30

VLG361524FDRSSL 30

VLG361524OSS 27

VLG361530FDLSSL 31

VLG361530FDRSSL 31

VLG361530OSS 27

VLG421215FDLSSL 28

VLG421215FDRSSL 28

VLG421215OSS 26

VLG421218FDLSSL 28

VLG421218FDRSSL 28

VLG421218OSS 26

VLG421224FDLSSL 28

VLG421224FDRSSL 28

VLG421224OSS 26

VLG421230FDLSSL 29

VLG421230FDRSSL 29

VLG421230OSS 26

VLG421515FDLSSL 30

VLG421515FDRSSL 30

VLG421515OSS 27

VLG421518FDLSSL 30

VLG421518FDRSSL 30

VLG421518OSS 27

VLG421524FDLSSL 30

VLG421524FDRSSL 30

VLG421524OSS 27

VLG421530FDLSSL 31

VLG421530FDRSSL 31

VLG421530OSS 27

VLG501215FDLSSL 28

VLG501215FDRSSL 28

VLG501215OSS 26

VLG501218FDLSSL 28

VLG501218FDRSSL 28

VLG501218OSS 26

VLG501224FDLSSL 28

VLG501224FDRSSL 28

VLG501224OSS 26

VLG501230FDLSSL 29

VLG501230FDRSSL 29

VLG501230OSS 26

VLG501515FDLSSL 30

VLG501515FDRSSL 30

VLG501515OSS 27

VLG501518FDLSSL 30

VLG501518FDRSSL 30

VLG501518OSS 27

VLG501524FDLSSL 30

VLG501524FDRSSL 30

VLG501524OSS 27

VLG501530FDLSSL 31

VLG501530FDRSSL 31

VLG501530OSS 27

VLG571215FDLSSL 28

VLG571215FDRSSL 28

VLG571215OSS 26

pattern no. page

VLG571218FDLSSL 28

VLG571218FDRSSL 28

VLG571218OSS 26

VLG571224FDLSSL 28

VLG571224FDRSSL 28

VLG571224OSS 26

VLG571230FDLSSL 29

VLG571230FDRSSL 29

VLG571230OSS 26

VLG571515FDLSSL 30

VLG571515FDRSSL 30

VLG571515OSS 27

VLG571518FDLSSL 30

VLG571518FDRSSL 30

VLG571518OSS 27

VLG571524FDLSSL 30

VLG571524FDRSSL 30

VLG571524OSS 27

VLG571530FDLSSL 31

VLG571530FDRSSL 31

VLG571530OSS 27

VLTB10530L 40

VLTB10538L 41

VLTB10548L 42

VLTB10560L 43

VLTB12030L 40

VLTB12038L 41

VLTB12048L 42

VLTB12060L 43

VLTB2430L 40

VLTB2438L 41

VLTB2448L 42

VLTB2460L 43

VLTB3030L 40

VLTB3038L 41

VLTB3048L 42

VLTB3060L 43

VLTB3630L 40

VLTB3638L 41

VLTB3648L 42

VLTB3660L 43

VLTB4530L 40

VLTB4538L 41

VLTB4548L 42

VLTB4560L 43

VLTB4830L 40

VLTB4838L 41

VLTB4848L 42

VLTB4860L 43

VLTB6030L 40

VLTB6038L 41

VLTB6048L 42

VLTB6060L 43

VLTB7230L 40

VLTB7238L 41

VLTB7248L 42

VLTB7260L 43

VLTB7530L 40

VLTB7538L 41

VLTB7548L 42

VLTB7560L 43

VLTB8430L 40

VLTB8438L 41

VLTB8448L 42

VLTB8460L 43

pattern no. page

VLTB9030L 40

VLTB9038L 41

VLTB9048L 42

VLTB9060L 43

VLTB9630L 40

VLTB9638L 41

VLTB9648L 42

VLTB9660L 43

VLTC10515L 40

VLTC10518L 41

VLTC10524L 42

VLTC10530L 43

VLTC12015L 40

VLTC12018L 41

VLTC12024L 42

VLTC12030L 43

VLTC2415L 40

VLTC2418L 41

VLTC2424L 42

VLTC2430L 43

VLTC3015L 40

VLTC3018L 41

VLTC3024L 42

VLTC3030L 43

VLTC3615L 40

VLTC3618L 41

VLTC3624L 42

VLTC3630L 43

VLTC4515L 40

VLTC4518L 41

VLTC4524L 42

VLTC4530L 43

VLTC4815L 40

VLTC4818L 41

VLTC4824L 42

VLTC4830L 43

VLTC6015L 40

VLTC6018L 41

VLTC6024L 42

VLTC6030L 43

VLTC7215L 40

VLTC7218L 41

VLTC7224L 42

VLTC7230L 43

VLTC7515L 40

VLTC7518L 41

VLTC7524L 42

VLTC7530L 43

VLTC8415L 40

VLTC8418L 41

VLTC8424L 42

VLTC8430L 43

VLTC9015L 40

VLTC9018L 41

VLTC9024L 42

VLTC9030L 43

VLTC9615L 40

VLTC9618L 41

VLTC9624L 42

VLTC9630L 43

VLTS1215L 40

VLTS1218L 41

VLTS1224L 42

VLTS1230L 43

VLTS1515L 40

pattern no. page

VLTS1518L 41

VLTS1524L 42

VLTS1530L 43

VPM201218BFNSL 9

VPM201218BFSSL 8

VPM201218FDLNSL 9

VPM201218FDLSSL 8

VPM201218FDRNSL 9

VPM201218FDRSSL 8

VPM201218OSN 9

VPM201218OSS 8

VPM201224BFNSL 9

VPM201224BFSSL 8

VPM201224FDLNSL 9

VPM201224FDLSSL 8

VPM201224FDRNSL 9

VPM201224FDRSSL 8

VPM201224OSN 9

VPM201224OSS 8

VPM201518BFNSL 11

VPM201518BFSSL 10

VPM201518FDLNSL 11

VPM201518FDLSSL 10

VPM201518FDRNSL 11

VPM201518FDRSSL 10

VPM201518OSN 11

VPM201518OSS 10

VPM201524BFNSL 11

VPM201524BFSSL 10

VPM201524FDLNSL 11

VPM201524FDLSSL 10

VPM201524FDRNSL 11

VPM201524FDRSSL 10

VPM201524OSN 11

VPM201524OSS 10

VPMC1218 12, 13

VPMC1224 12, 13

VPMC1518 12, 13

VPMC1524 12, 13

Quoin

53

Page 55: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

This Selling Policy supercedes all previous selling policies. Prices, discounts and product offerings are subject to change without notice.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Terms & Conditions

of SalesSales by Knoll, Inc. or Knoll North America Corp. (‘‘Seller’’) of Knoll Product Lines (hereinafter ‘‘Products’’) within the United States and Canada are made onlyon the terms which are contained in this Selling Policy. Seller hereby gives notice of its objection to any different or additional terms and conditions. This sale isexpressly conditional upon Purchaser’s assent to the terms and conditions set forth below. Additional terms and conditions may apply to KnollStudio andKnollTextiles orders. These terms and conditions may be modified or supplemented only by a written document signed by an authorized representative of Seller.These terms and conditions supercede any prior and/or contemporaneous agreements or correspondence between Purchaser and Seller. Written quotationsexpire thirty (30) days from the date of issuance and can be withdrawn by written notice anytime during that period. Where Purchaser and Seller have enteredinto the Knoll Electronic Terms and Conditions, all orders, acknowledgements, invoices and other business communications placed or transmitted inaccordance with the Knoll Electronic Terms and Conditions shall be deemed to be in writing and signed and shall be valid for all purposes as if they wereoriginated and maintained in documentary form.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Ordering Information All orders must be in writing. The product pattern number(s) contained on Seller’s order acknowledgement shall be the final expression of the order.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Order Confirmation A purchase order is not binding on Seller until Purchaser has received Seller’s order confirmation or acknowledgment.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Pricing Policies List prices are subject to change without notice.List prices shall be those prices in effect on the date of receipt of a complete purchase order unless shipment is requested more than ninety (90) days after orderentry in which case prices in effect on the date of shipment apply. List prices include specified freight costs. Unless specified in writing by Seller, no othercharges are included in Seller’s list prices.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Taxes All sales, use, excise and other taxes applicable to the sale of the Products shall be paid by Purchaser. If Purchaser claims an exemption from any tax,Purchaser shall submit to Seller the appropriate exemption certificates.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Terms of Payment Payment for one hundred percent (100%) of the net order amount is due within thirty (30) days of the date of invoice, which is generally issued upon shipment.In case of any discrepancies, such as shortages, and Seller is notified in writing within ten (10) days of receipt of Product, only that portion may be deductedand the balance paid. For orders greater than $100,000 net, a fifty percent (50%) deposit is due at the time of order placement, with the remainder due withinthirty (30) days of the date of invoice.KnollStudio orders less than $2,000 require payment for one hundred percent (100%) of the net order amount (including any applicable sales tax and chargesfor inside delivery, special packaging, etc.), due at time of order placement. For KnollStudio orders greater than $2,000, a one-half (50%) deposit is due at timeof order placement with the remainder (including any applicable sales tax and charges for inside delivery, special packaging, etc.) due prior to shipment.If, in the judgment of Seller, Purchaser’s financial condition does not justify the terms of the payment, Seller may require full or partial payment in advance.Past due accounts shall be charged one and one-half percent (1.5%) per month, or the highest rate permitted by law, whichever is less, and will be added to theoutstanding balance. In the event Purchaser defaults on payment, Purchaser shall be liable for all collection costs, including reasonable attorney’s fees andcosts.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Changes andCancellation

Purchase orders may not be changed or cancelled, in whole or in part, without prior written consent of Seller. Changes may effect delivery dates. Expensesincurred because of changes shall be charged to Purchaser. In the event of cancellations, Purchaser will be liable for reasonable cancellation chargesestablished by Seller. Orders for special Product, orders including ‘‘COM’’ (hereinafter defined) material and orders pursuant to expedited delivery programs,may not be canceled.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Freight Prepaid Freight is prepaid and included in the price of all Products, except KnollTextiles, within the 48 contiguous United States for orders placed with Knoll, Inc. andwithin Canada, excluding the Yukon, Northwest Territories, Nunavut and Newfoundland for orders placed with Knoll North America Corp. Packing is tested forrigorous motion and transportation but is not guaranteed to protect furniture from all conditions. If special packaging is required for any reason, please consultwith your sales representative or dealer. Seller shall select the method of shipment and routing. Freight for all KnollTextiles orders is prepaid and added to theinvoice.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Delivery/Freight Charges Shipments outside the contiguous 48 United States and Canada shall be shipped F.O.B. Origin.For shipments outside the contiguous United States and Canada, Purchaser is responsible for the cost of freight from point of embarkation, including anyhandling and transportation charges incidental to loading at the point of departure and unloading at the final destination.Conditions beyond the control of Seller, including weather, available facilities and traffic conditions, may affect exact time of delivery. Seller shall not beresponsible for specific carrier delivery date or time unless it has made a specific delivery commitment, in writing.Nonstandard methods of shipment and/or additional services are available upon request. Purchaser will be billed for the differential cost of any special servicesin excess of standard surface carrier freight costs. Premium charges, at Purchaser’s request, will be added for airfreight, exclusive use of vehicle and extra,export or special packaging. Accessorial charges will be added for inside delivery, extra labor, reconsignment and redelivery.Partial shipments may be made and invoiced by Seller.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Claims All shipments for Knoll Products within the contiguous United States and Canada are F.O.B. Origin. All risk of loss passes to Purchaser at time of delivery tocarrier. Purchaser shall inspect all Products upon receipt and notify Seller within ten (10) working days after receipt of any damage or defects which are, orshould be, apparent from an inspection of the Product and its packaging. Failure of Purchaser to notify Seller during the ten (10) working day period shallconstitute acceptance of the Products and waiver of any apparent defects, errors or shortages. For all claims relating to Product damaged in transit or for anyother claims relating to or arising out of the transportation of the Product, Purchaser must seek recovery from the carrier and Seller has no liability to Purchaserfor such claims. Seller may, upon request, assist Purchaser with filing of such claims with the carrier, but Seller will not be liable for any of these transportationrelated claims.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Seller’s Security Interest Until Seller receives the full payment for the Product, Seller shall have a security interest in the Product. Purchaser agrees to perform all acts, including but notlimited to the execution and filing of documentation, which may be necessary to perfect and assure the security interest of Seller.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Returns The return of Products without a written authorization by Seller shall not be accepted. To receive authorization for Product return, please call Customer Service.All Products that are returned pursuant to a valid authorization shall be subject to a twenty-five percent (25%) of list restocking charge. Products not currentlyoffered for sale by Seller (including COM) shall not be authorized for return. All returned Products must be unused, in original condition and in the originalSeller packing cartons. No refund or credit shall be given for damaged Products.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Held Orders/Storage If Purchaser requests that an order be held or delayed, prices and terms and conditions in effect at the time of shipment shall apply. If Purchaser requests adelay after the time when Seller can defer production, Purchaser will be invoiced for the Product, payable in accordance with standard terms, when the order isready for shipment. Seller may transfer the Product to storage, in which case all expenses incurred in connection with storage, including demurrage, preparationfor storage, storage charges and handling shall be payable by Purchaser upon submission of invoices by Seller. Risk of loss to the Product shall pass to thePurchaser upon delivery of the Product into storage.

Selling Policy

54March 15, 2020

Page 56: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

Customer’s Own Material A Purchaser who requests a fabric or other surface material not standard to Seller’s line of Products (‘‘COM’’) must submit samples of the requested material toSeller prior to entry of a purchaser order. Seller shall determine if the material is suitable to its manufacturing processes and meets any requirements ofUnderwriters Laboratories. If the COM is acceptable, Seller will then establish a price for using the COM or the Product in question. For a description of theprocedures for submitting samples and testing, contact customer resources or your sales representative. Seller shall have no responsibility for the appearance,condition, performance, durability, colorfastness or any other physical attribute of the COM. Purchaser shall indemnify and hold Seller harmless for anydamages, injuries or losses arising out of or related to use of the COM on the Product.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Warranty Seller warrants to the original Purchaser only that the Products Seller manufactures and sells to Purchaser are free of defects in workmanship and materials,during the applicable warranty period set forth below.Warranty period set forth below is for 24-hour, 7 days a week, multi shift use (includes parts and labor to repair).Should any failure to conform with this limited warranty appear to a Product listed below during the applicable warranty period from the date of shipment, Sellershall, upon prompt written notice, repair or replace, at its option and costs, the affected part or parts.Product and Period of WarrantyLifetime: Antenna Workspaces, AutoStrada, Calibre, Crinion Open Table, Currents, Dividends Horizon, Morrison, Reff Profiles laminate, Rockwell Unscripted,Series 2 Storage, Template, Quoin and other non-wood components (except cascade edge worksurfaces, operational parts, controls, electrical, Lighting, Series 2Veneer Front Storage, digital locks, uphostery, textiles and leathers, special or custom products, see below)12 Years: Chadwick, Generation by Knoll, k. task, Life, Moment, MultiGeneration by Knoll, Ollo, ReGeneration by Knoll, Remix, and Toboggan seating (exceptseating upholstery, textiles, leathers and finishes, see below).10 Years: Anchor Storage except digital locks, Antenna Workspaces, AutoStrada, Crinion Open Table, Dividends Horizon, Dividends Horizon Satellite Surfaces,Reff Profiles, Rockwell Unscripted, Quoin wood components, Template wood components, Series 2 Veneer Front Storage, cascade edge worksurfaces, WoodCasegoods (The Graham Collection) (except wood casegoods upholstered surfaces, see below), Reuter overheads, Reuter vertical storage, KnollExtra SapperMonitor Arm Collection, Sapper XYZ Monitor Arm Series, Adjustable keyboard mechanisms and platforms, Communication Boards (except fabric boardtextiles, cork and FilzFelt, see below), Smokador collection (except leathers, see below), Orchestra Universal Systems Accessories, k. lounge structuralcomponents, KnollStudio Pixel and Propeller, Tone bases and k.screens.5 Years: Operational parts, controls, electrical, Lighting (except light ballasts, bulbs and power supply, see below), special or custom product, wood veneerproducts and plywood, Currents handcrank, KnollStudio, Rockwell Unscripted wire bases, Spark Series seating structural elements, structural elements of allKnollStudio outdoor products including all Richard Schultz designed products, KnollExtra CPU holders and all universal storage drawers and Power Collection,k. bench (except changes in finish, see below) and k. stand bases (except changes in finish, see below).3 Years: Rockwell Unscripted upholstery (except textiles and leather), Office Seating upholstery, textiles, leathers and finishes. Fabric boards textiles andSmokador Collection leathers, KnollExtra Pop Up Screens.2 Years: Anchor Storage digital locks, Quoin digital locks, all other KnollExtra product and KnollTextiles Ultrasuede.1 Year: Light ballasts, bulbs and power supply, seating upholstered armpads and soft armpads, wood casegoods upholstered surfaces. KnollStudio, outdoorproduct finishes, k. lounge upholstery and k. lounge fabric. Rockwell Unscripted fabric and accessories, Spinneybeck leathers, and KnollTextiles upholsteryexcept Ultrasuede.This warranty does not apply to:• Damage caused by a carrier other than the Seller.• Normal wear and tear or acts or omissions of parties other than Seller (including user modification, improper use or installation of Products).• COM or other third party materials applied to Products.• Products not installed by or under the auspices of a Knoll Dealer.• Dramatic temperature variations or exposure to unusual conditions.• Changes in surface finishes, including colorfastness due to aging or exposure to light.• Except as specifically noted above, textiles and upholstery supplied by KnollTextiles and Spinneybeck FilzFelt (consult current price lists for applicable

warranties).Natural variations occurring in wood, marble, and leather shall not be considered defects, and the Seller does not guarantee the colorfastness or matching of thecolors, grains or textures, or surface hardness of such materials. The Seller also does not guarantee the colorfastness of fiberglass panel surfaces.THE EXPRESS WARRANTIES CONTAINED HEREIN ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANYWARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OFDEALING OR USAGE OF TRADE.The remedies provided above are the Purchaser’s sole remedies for any failure of Seller to comply with its obligations regarding the workmanship of itsProducts. Correction of any nonconformity in the manner and for the period of time provided shall constitute complete fulfillment of all liabilities of Seller, withrespect to or arising out of the Product furnished hereunder.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Delay/Force Majeure Seller shall not be liable for failure to perform or for delay in performance due to fire, flood, strike or other labor difficulty, act of God, act of war or terrorism, actof any governmental authority or of the Purchaser, riot, embargo, fuel or energy shortage, wrecks or delay in transportation, inability to obtain necessary labor,materials or manufacturing facilities from usual sources or failure of suppliers to meet their contractual obligations, or due to any cause beyond its reasonablecontrol. If any such event occurs, Seller may extend delivery dates by a period of time necessary to overcome the effect of such delay, allocate available Productor cancel any purchase order.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Compliance with Law PURCHASER IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL APPLICABLE FEDERAL, STATE AND LOCAL LAWS, ORDINANCES,REGULATIONS, RULES AND STANDARDS RELATING TO THE INSTALLATION, MAINTENANCE, USE AND OPERATION OF THE PRODUCTS.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Patents Subject to the following provisions, Seller shall, at its own expense, defend or, at its option, settle any claim, suit or proceeding brought against the Purchaser,and/or its vendees, mediate and immediate, so far as based on an allegation that any Product or any part thereof furnished hereunder constitutes a direct or acontributory infringement of any claim of any patent of the United States or Canada. This obligation shall be effective only if Purchaser shall have made allpayments then due hereunder and if Seller is notified promptly in writing and given authority, information and assistance for the defense of said claim, suit orproceeding. Seller shall pay all damages and costs awarded in such suit or proceedings so defended.The foregoing indemnity does not apply to the following:• Products supplied according to a design other than that of Seller, and which is required by the Purchaser.• Combination of the Product with another product not furnished hereunder unless Seller is a contributory infringer.• Any settlements of a suit or proceeding made without Seller’s written consent.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Limitations of Liability SELLER, ITS CONTRACTORS, AUTHORIZED DEALERS AND SUBCONTRACTORS OR SUPPLIERS OF ANY TIER SHALL NOT BELIABLE TO PURCHASER FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM A BREACHOF THIS AGREEMENT.Purchaser’s remedies set forth herein are exclusive and the liability of Seller with respect to the breach of this agreement or any contract entered into betweenthe parties pursuant hereto shall not exceed the price of the Product or part on which such liability is based.

Selling Policy

55March 15, 2020

Page 57: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

KnollKey Lock Program

KnollKeyLock ProgramGeneral InformationFollowing is the KnollKey lock policy, applicable to all products.

Knoll furniture can be ordered keyed-alike or random keyed. Key-alikeand random keying instructions cannot be mixed on any single order. Onlyone of the two instructions can be used on an individual order. When anorder is submitted with mixed (key-alike and random) instructions, Knollwill release the order as key-alike only and lock cores will have to bespecified separately.

Key-alikeFor the convenience of the user, furniture may be keyed alike at nocharge. Write ‘‘Key-alike’’ in the description of your purchase order forany pedestal, overhead, file or other item you wish to have keyed alike.

Using the key-alike instructions, order cores and keys as line items onyour purchase order. Do NOT submit a key-alike form. The Knoll EastGreenville Lock Center will select key numbers from the standard range ofK 001 - K 250. Key numbers will not be repeated unless over 250 sets areordered. Lock cores keyed-alike will ship separately from the product,ready for field installation.

There is no charge for key-alike orders if placed with the furniture order.

IF THE KEY-ALIKE ORDER IS NOT PLACED AT LEAST TWO WEEKSPRIOR TO THE FURNITURE SHIP DATE, A $50 HANDLING CHARGEAND AIR FREIGHT CHARGES WILL APPLY.

If product is ordered and shipped random-keyed, additional lock coresfor key-alike are billable.

Random-KeyingTo specify product keyed-random, write ‘‘key-random’’ in the productdescription. Random-keyed product is shipped with the lock core factoryinstalled. A shrouded key is included. Random means no effort has beenmade to match key numbers, or to make them different.

KeysA Knoll shrouded key is shipped with every lock core. 250 Key numbersare available. For numbers above 250, contact Custom ProductDevelopment. Additional keys and key blanks are available. See serviceparts for more information.

Master KeyingKnoll locks can be controlled by means of a master key. There is noadditional per-lock charge for master keying. A letter of approval from theclient must accompany orders for master keys.

Installing Lock CoresLock cores can be installed or removed in the field by using a change key.Cores must be in the unlocked position to be removed. See service partsfor change key pattern number and pricing.

Lock DistributionAll orders for key-alike lock cores/keys are packaged and shipped fromthe East Greenville Lock Center, regardless of where the pedestals,overhead, or other units are produced. Random keyed product will havecores factory-installed.

How to SpecifyKey-AlikeFollowing is an example of how to specify key-alike for a cluster of 10workstations.

Step 1 - Using the project floorplan, count the number of locks in eachworkstation.

Step 2 - Count the number of workstations with the same quantity oflocks. Group together the workstations with a like number of locks.

5 workstations with 2 locks per station3 workstations with 4 locks per station2 workstations with 5 locks per station

Step 3 - For the first group (5 sets of 2 locks), enter the number ofworkstations in the quantity column.

Qty Pattern # Description Unit List Ext. List

5

Step 4 - Then enter the pattern number ‘‘KSPEC_ _’’ and add a suffix for thenumber of locks for that group (i.e., for 2 locks per station, add the suffix‘‘2’’). Up to 30 lock cores are available in a set (i.e., KSPEC 30).

Qty Pattern # Description Unit List Ext. List

5 KSPEC 2 Set of 2 cores/keys N / C N / C

Step 5 - Repeat for other groups.

Qty Pattern # Description Unit List Ext. List

5 KSPEC 2 Set of 2 cores/keys N / C N / C

3 KSPEC 4 Set of 4 cores/keys N / C N / C

2 KSPEC 5 Set of 5 cores/keys N / C N / C

Your Key instructions are complete.

Knoll will select key numbers for each set from 250 available numbers.Additional key numbers are available through Custom Product Development.For additions to existing installations, specify desired key numbers inthe description.

Service PartsPattern # Description List Price

KKEY_ _ _ Shrouded KeySpecify key number desired

$10

KBLANK Shrouded Key Blank $10

KSPECB_ _ _ Retrofit Universal Core/KeySpecify key number desired

$22

KCHANGE Change Key $10

HLKRKMASTER* Master Key $10

*Note: A letter of approval on company letterhead from the client mustaccompany all orders for master keys.

56

Page 58: QuoinPLQN...Quoin Foot Specifications Quoin Raised Storage Feet are nominally 3’’ high with black leveling glide. Foot kits are specified separately as kits and installed on-site

General Ordering Information

The ProductsThis guide encompasses all standard products for this product group.

SizesDimensions listed in this guide are indicated as:H = heightW = widthD = depthDia. = diameterRad. = radius

PricingAll prices shown are list.

How to OrderSelect pattern numbers and quantities required for your complete installation. Product questions can beaddressed in the specific sections of this guide or by contacting your sales representative or customerresource representative at 1-800-343-5665.

Next, select options (if required), along with colors and finishes appropriate to each product. Reference theFinishes and Fabrics pages for color designations.

On large installations, an item’s ‘‘designated area’’ can be specified to assist in product organization andhandling.

To expedite complete / correct entry of your order, be certain all pattern numbers, quantities, colors andarea identifications are completely specified. Also, include complete purchase order numbers, bill-to andship-to addresses, a contact name and specific factory shipping dates required.

Mail all orders to:Knoll, Inc.1235 Water StreetP.O. Box 157East Greenville, PA 18041Attention: Order Entry

Once your order is entered at Knoll, an acknowledgment will be mailed to you. You will be advised of yourscheduled shipping date within five days of the original acknowledgment. If it is necessary to revise yourorder, please contact your customer resource representative.

Sustainability Statement

Sustainable design is a key component of Knoll’s environmental focus. Our commitment to socialresponsibility and a healthy environment has prompted us to further articulate our longstandingenvironmental programs and, with encouragement and support from our colleagues in the industry, we havere-energized our focus on such ‘‘green’’ initiatives as life cycle analysis and LEED™ certification. Knoll isproud to have contributed to projects that have received LEED certification from the U.S. Green BuildingCouncil.

For the latest information on Knoll products that help our customers achieve LEED certification, log on toknoll.com, click on ‘‘About Knoll’’ and then ‘‘Environmental Focus.’’

57