quick start guide 1 quick start guide 3 follow these ...s7.leapfrog.com/is/content/leapfrog/site...
TRANSCRIPT
m1PMS 877
Die line is FPO. Please refer to Agile/BOM for current version.
Please refer to Agile DOC-160 for Parent Guide Fold Schematic and/or paper substrate for
non-packaging items.
Mech 1: Artw
ork checked & Slug updated; Echo; 27MAY13
5.625"w x 10.75"h.25"
6.125"w x 11.25"h
63320LPU_QSG_PKrevAm1.ai
810-23924-A615-10547-A
475-02528N/A
100%100%
27MAY13
WS
Echo
Whitney-Semibold; Chevin Std Bold; W
hitney-Bold; WhitneyCondensed-Book;
WhitneyCondensed-Bold; W
hitneyCondensed-Medium; Gill Sans Condensed; Gill Sans Bold Condensed
[•][•]
[ ][ ]
[ ] Other
™
™
POWER UP and turn on your LeapPad™ Ultra with the included wall charger.*
SET UP your device by following the on-screen prompts to connect to Wi-Fi.**
REGISTER your device by creating a LeapFrog parent account.
1
2
3
4
5
DOWNLOAD your included learning games.
PLAY & LEARN! Your child is now ready to play with their LeapPad Ultra.***
*Registration and device set-up can continue while charging—charging may take up to 7 hours. **If Wi-Fi is not available at time of device set-up, you can complete set-up using the included USB cable and by installing the LeapFrog Connect Application on your computer. Go to leapfrog.com/connect to download.*** Full device set-up may take approximately 20 minutes or longer depending on your Wi-Fi connection speed.
Get started in 5 easy steps!
USBConnector/
Charger
PowerButton
D-Pad StylusTether Points
VolumeButtons
Cartridge Slot
HomeButton
Camera/Video
Recorder
Camera/Video
Recorder ChargingLight
Stylus
HeadphoneJack
Microphone
Speaker
High-speed internet connection for parent account and device set-up required for use of some features.
For non-Wi-Fi set-up, download the LeapFrog Connect Application to your computer (free at leapfrog.com/connect).
Monitor resolution of 1024 x 768Available USB port1 GB of RAM500 MB free disk spaceLatest version of Adobe® Flash® Player
PC Requirements:Pentium® 4 or equivalent (2 GHz processor or faster recommended)Windows® XP, Windows Vista®, Windows® 7, or Windows® 8 operating system with latest service pack
Mac Computer Requirements:Intel®-based Apple computer (1 GHz processor or faster recommended)Mac OS X 10.6+ operating system software
MAC, APPLE and MAC OS are trademarks of Apple Inc., registered in the U.S. and other countries.Part #: 615-10547-A
System Requirements
Quick Start GuideFollow these instructions
before your child plays
m1PMS 877
Die line is FPO. Please refer to Agile/BOM for current version.
Please refer to Agile DOC-160 for Parent Guide Fold Schematic and/or paper substrate for
non-packaging items.
Mech 1: Artw
ork checked & Slug updated; Echo; 27MAY13
5.625"w x 10.75"h.25"
6.125"w x 11.25"h
63320LPU_QSG_PKrevAm1.ai
810-23924-A615-10547-A
475-02528N/A
100%100%
27MAY13
WS
Echo
Whitney-Semibold; Chevin Std Bold; W
hitney-Bold; WhitneyCondensed-Book;
WhitneyCondensed-Bold; W
hitneyCondensed-Medium; Gill Sans Condensed; Gill Sans Bold Condensed
[•][•]
[ ][ ]
[ ] Other
™
™
POWER UP and turn on your LeapPad™ Ultra with the included wall charger.*
SET UP your device by following the on-screen prompts to connect to Wi-Fi.**
REGISTER your device by creating a LeapFrog parent account.
1
2
3
4
5
DOWNLOAD your included learning games.
PLAY & LEARN! Your child is now ready to play with their LeapPad Ultra.***
*Registration and device set-up can continue while charging—charging may take up to 7 hours. **If Wi-Fi is not available at time of device set-up, you can complete set-up using the included USB cable and by installing the LeapFrog Connect Application on your computer. Go to leapfrog.com/connect to download.*** Full device set-up may take approximately 20 minutes or longer depending on your Wi-Fi connection speed.
Get started in 5 easy steps!
USBConnector/
Charger
PowerButton
D-Pad StylusTether Points
VolumeButtons
Cartridge Slot
HomeButton
Camera/Video
Recorder
Camera/Video
Recorder ChargingLight
Stylus
HeadphoneJack
Microphone
Speaker
High-speed internet connection for parent account and device set-up required for use of some features.
For non-Wi-Fi set-up, download the LeapFrog Connect Application to your computer (free at leapfrog.com/connect).
Monitor resolution of 1024 x 768Available USB port1 GB of RAM500 MB free disk spaceLatest version of Adobe® Flash® Player
PC Requirements:Pentium® 4 or equivalent (2 GHz processor or faster recommended)Windows® XP, Windows Vista®, Windows® 7, or Windows® 8 operating system with latest service pack
Mac Computer Requirements:Intel®-based Apple computer (1 GHz processor or faster recommended)Mac OS X 10.6+ operating system software
MAC, APPLE and MAC OS are trademarks of Apple Inc., registered in the U.S. and other countries.Part #: 615-10547-A
System Requirements
Quick Start GuideFollow these instructions
before your child plays
m1PMS 877
Die line is FPO. Please refer to Agile/BOM for current version.
Please refer to Agile DOC-160 for Parent Guide Fold Schematic and/or paper substrate for
non-packaging items.
Mech 1: Artw
ork checked & Slug updated; Echo; 27MAY13
5.625"w x 10.75"h.25"
6.125"w x 11.25"h
63320LPU_QSG_PKrevAm1.ai
810-23924-A615-10547-A
475-02528N/A
100%100%
27MAY13
WS
Echo
Whitney-Semibold; Chevin Std Bold; W
hitney-Bold; WhitneyCondensed-Book;
WhitneyCondensed-Bold; W
hitneyCondensed-Medium; Gill Sans Condensed; Gill Sans Bold Condensed
[•][•]
[ ][ ]
[ ] Other
™
™
POWER UP and turn on your LeapPad™ Ultra with the included wall charger.*
SET UP your device by following the on-screen prompts to connect to Wi-Fi.**
REGISTER your device by creating a LeapFrog parent account.
1
2
3
4
5
DOWNLOAD your included learning games.
PLAY & LEARN! Your child is now ready to play with their LeapPad Ultra.***
*Registration and device set-up can continue while charging—charging may take up to 7 hours. **If Wi-Fi is not available at time of device set-up, you can complete set-up using the included USB cable and by installing the LeapFrog Connect Application on your computer. Go to leapfrog.com/connect to download.*** Full device set-up may take approximately 20 minutes or longer depending on your Wi-Fi connection speed.
Get started in 5 easy steps!
USBConnector/
Charger
PowerButton
D-Pad StylusTether Points
VolumeButtons
Cartridge Slot
HomeButton
Camera/Video
Recorder
Camera/Video
Recorder ChargingLight
Stylus
HeadphoneJack
Microphone
Speaker
High-speed internet connection for parent account and device set-up required for use of some features.
For non-Wi-Fi set-up, download the LeapFrog Connect Application to your computer (free at leapfrog.com/connect).
Monitor resolution of 1024 x 768Available USB port1 GB of RAM500 MB free disk spaceLatest version of Adobe® Flash® Player
PC Requirements:Pentium® 4 or equivalent (2 GHz processor or faster recommended)Windows® XP, Windows Vista®, Windows® 7, or Windows® 8 operating system with latest service pack
Mac Computer Requirements:Intel®-based Apple computer (1 GHz processor or faster recommended)Mac OS X 10.6+ operating system software
MAC, APPLE and MAC OS are trademarks of Apple Inc., registered in the U.S. and other countries.Part #: 615-10547-A
System Requirements
Quick Start GuideFollow these instructions
before your child plays
m1PMS 877
Die line is FPO. Please refer to Agile/BOM for current version.
Please refer to Agile DOC-160 for Parent Guide Fold Schematic and/or paper substrate for
non-packaging items.
Mech 1: Artw
ork checked & Slug updated; Echo; 27MAY13
5.625"w x 10.75"h.25"
6.125"w x 11.25"h
63320LPU_QSG_PKrevAm1.ai
810-23924-A615-10547-A
475-02528N/A
100%100%
27MAY13
WS
Echo
Whitney-Semibold; Chevin Std Bold; W
hitney-Bold; WhitneyCondensed-Book;
WhitneyCondensed-Bold; W
hitneyCondensed-Medium; Gill Sans Condensed; Gill Sans Bold Condensed
[•][•]
[ ][ ]
[ ] Other
™
™
POWER UP and turn on your LeapPad™ Ultra with the included wall charger.*
SET UP your device by following the on-screen prompts to connect to Wi-Fi.**
REGISTER your device by creating a LeapFrog parent account.
1
2
3
4
5
DOWNLOAD your included learning games.
PLAY & LEARN! Your child is now ready to play with their LeapPad Ultra.***
*Registration and device set-up can continue while charging—charging may take up to 7 hours. **If Wi-Fi is not available at time of device set-up, you can complete set-up using the included USB cable and by installing the LeapFrog Connect Application on your computer. Go to leapfrog.com/connect to download.*** Full device set-up may take approximately 20 minutes or longer depending on your Wi-Fi connection speed.
Get started in 5 easy steps!
USBConnector/
Charger
PowerButton
D-Pad StylusTether Points
VolumeButtons
Cartridge Slot
HomeButton
Camera/Video
Recorder
Camera/Video
Recorder ChargingLight
Stylus
HeadphoneJack
Microphone
Speaker
High-speed internet connection for parent account and device set-up required for use of some features.
For non-Wi-Fi set-up, download the LeapFrog Connect Application to your computer (free at leapfrog.com/connect).
Monitor resolution of 1024 x 768Available USB port1 GB of RAM500 MB free disk spaceLatest version of Adobe® Flash® Player
PC Requirements:Pentium® 4 or equivalent (2 GHz processor or faster recommended)Windows® XP, Windows Vista®, Windows® 7, or Windows® 8 operating system with latest service pack
Mac Computer Requirements:Intel®-based Apple computer (1 GHz processor or faster recommended)Mac OS X 10.6+ operating system software
MAC, APPLE and MAC OS are trademarks of Apple Inc., registered in the U.S. and other countries.Part #: 615-10547-A
System Requirements
Quick Start GuideFollow these instructions
before your child plays