Gutter Glove Pro

Gutterglove Pro is the most superiorly designed Gutter guard that saves your gutters from overflowing, or having leaves and other muck clog the gutter system. With a topnotch design Gutterglove uses Marine Grade stainless steel which comes with hard anodized extruded aluminum, making it corrosion resistant.

The Design of Gutterglove Pro works with thin Aluminum channels and a very fine mesh screen that sits atop the Aluminum frame. The system assures you of filtering anything larger than 50 micron viz. “1/3 the size of a human hair” and so even the smallest of Debris can’t find a way into your Gutters.

Gutterglove Pro Serves the Following purposes:

•Frees you from gutter cleaning worries forever!•It serves as the First Stage filter in a efficient rain harvesting System.•It will never let your rain gutter clog in the future.

continued.

•Gutterglove Pro Fits easily on any type of roof•Resourcefully Filters out all waste material from your gutter•Fits and goes along with every gutter material and type.•It can Filter over 150 inches of rain per hour.

Three Types of Gutter Guards

Generally, guard products are grouped into three basic categories:

•Firstly, there are a variety of screens that filter the debris from the water. They can be expensive micro-mesh screen systems or some cheap screened sheets.

• Then there are solid gutter covers that ward off leaves and debris while collecting rain overflow.

•Lastly, those Gutter add-ons that are made of foam or brushes that fit into the gutter stream preventing leaves and debris from clogging the gutters while allowing water to run through the channels.

Gutter Glove Pro:Construction and How it Works

Gutterglove Pro is just another micro-mesh gutter screen system, only more advanced. It has an anodized aluminum frame which is made of U-shaped channels that hold the screen in place. The Gutterglove system is designed to be tucked under existing shingles forming a lip over the edge of existing gutters.

continued...

Though Gutterglove Pro can be undertaken as a DIY Project however it is best installed by a gutter professional.

The materials only for Gutterglove cost about $12 per lineal foot while the overall Gutterglove installation cost will run closer to $20 per foot. Also, Gutterglove Pro comes with a lifetime guarantee.

Construction:Gutterglove Pro mainly consists of two components; a perforated aluminum channel and a very fine type 316 stainless steel mesh. The stainless steel mesh is fit into grooves on both sides of each 5 foot aluminum channel division. It is installed on your existing gutters continued..

Gutterglove was specifically designed to simply slip under the roof shingles and fit snugly to the front lip of your gutter. However, Gutterglove Pro should be installed at a pitch same as the roof (up to 5/12) to get the best result of the debris flaking off.

Aluminum Frame:Hard anodized Aluminum Frame used in the Gutterglove pro as it serves to support the Stainless screen mesh laid atop. Anodized aluminum is used for this process as it especially designed and manufactured to withstand harsh weather climates.

Stainless Steel Mesh:The stainless steel mesh used in Gutterglove Pro is special type 316 steel screen which is lined with extremely fine pores that lets in almost 150 cm of rainwater per hour into your gutters while filtering even the finest of debris and muck.

continued..

The type 316 is especially formulated molybdenum alloy which is not only corrosion resistant but also enhances the tensile strength of the screen at elevated temperatures and increases the stress to rupture level manifold. Thus the steel screen stays intact even under the pressure of heavy downpour.

Installing Gutterglove Pro on your guttering system will surely prove to be the best decision. But make sure to let the ‘Pros’ help you with the matter. Call SunshineGuttersPro in Dogtown for all your Gutter related concerns.

Thank You!

Contact us at: http://sunshinegutterspro.comCall at : 510-525-0880