quick-connects, qc, qf, qm, and qtm series, (ms-01-138,...

$: Quick-Connects, QC, QF, QM, and QTM Series, (MS-01-138, R8)infracom.kylos.pl/profil_tech_katalog/a/02/02_01_(ms-01-138).pdf · see the Swagelok Gaugeable Tube Fittings and Adapter$
www.swagelok.com

Quick-Connects

QC, QF, QM, and QTM Ser ies■ No twisting, turning, or wrenching necessary

■ Single-end shutoff, double-end shutoff, and full-flow models

http://www.swagelok.com

2 Quick-Connects

Swagelok® Quick-Connects

CouplingAny quick-connect stem will fit any quick-connect body of the same series and size.

Examples: Any QC4 stem will fit any QC4 body. Any QC8 stem will fit any QC8 body.

Single- and Double-End Shutoff StemsSingle-end shutoff (SESO) stems have no valves and remain open when uncoupled.

Double-end shutoff (DESO) stems have valves and shut off when uncoupled.

SpillageSpillage is the amount of system fluid that escapes when a quick-connect is uncoupled (DESO only).

Air InclusionAir inclusion is the amount of air trapped between the body and stem that enters the system when a quick-connect is coupled (DESO only).

Flow Coefficient (Cv)Cv is an average value and may vary ± 10 %. Cv is based on like end connections on stem and body. For unlike end connections, average the two Cv values.

End ConnectionsAdditional end connections —such as ISO parallel and tapered thread, AN thread, pipe weld—are available. Where these end connections are not listed, a tube adapter can be used to create a two-piece assembly. For more information on tube adapters, see the Swagelok Gaugeable Tube Fittings and Adapter Fittings catalog, MS-01-140.

Operation of Swagelok Quick-Connects■ Use filters ahead of quick-connects.

■ Use body and stem protectors or dust caps on uncoupled bodies and stems.

■ Align bodies and stems when coupling or uncoupling.

■ Couple and uncouple quick-connects at room temperature.

■ Couple and uncouple quick-connects during system cleaning operations.

■ Support hanging hoses or other equipment to prevent side load.

■ Relubricate stem seal O-rings periodically.

Warning:■ Pressure rating restrictions apply when coupling

and uncoupling.

■ Do not uncouple single-end shutoff quick-connects under pressure.

Caution:■ Do not rotate quick-connects while coupled.

■ Do not insert foreign objects into uncoupled bodies or stems.

Contents

Full-Flow Quick-Connects QF Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Miniature Quick-Connects QM Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

PTFE-Sealed Quick-Connects QTM Series (Standard and Keyed) . . . . . . . . . . . . . . . . . . . 13

Instrumentation Quick-Connects QC Series (Standard and Keyed) . . . . . . . . . . . . . . . . . . . . . 3

Quick-Connects 3

Features■ Redesigned

stem insert requires just one O-ring seal, yet improves O-ring containment.

■ New-design stems and bodies interchange with old-design stems and bodies.

■ Locking dog mechanism with large contact area retains stem.

■ Push-to-connect coupling enables quick, easy operation.

■ Wide variety of options, including keyed quick-connects, are available.

■ Heavy-duty sleeve shields open end of body.

Instrumentation Quick-Connects QC Series

Double-End Shutoff (DESO)—Red Stem Sleeve

SWAGELO

KSWAGELO

K

SWAGELO

KSWAGELO

K

DESO valve O-ring

Spillage and Air Inclusion

SeriesSpillage

cm3Air Inclusion

cm3

QC4 0.3 0.3

QC6 1.0 1.0

QC8 3.0 3.0

Maximum Flow Rateat 70°F (20°C)

Series

Water Flow U.S. gal/min

(L/min)

QC4 4 (15)

QC6 6 (22)

QC8 10 (37)

Wetted components listed in italics.Other O-ring materials and lubricants available. Contact your authorized Swagelok sales and service representative.

Materials of Construction

Component

Material

316 SS Brass

Body, housing, stem

316 SS

Brass C36000

Body valve, body insert, DESO valve,

DESO retainer Brass C36000

SESO stem insert Brass C26000

O-rings Fluorocarbon FKM Buna N

Springs 316 SS

Snap rings 316 SS

Body sleeve Powdered metal 300 series SS Brass C36000

DESO stem sleeve Polyurethane enamel-coated 316 SS

Polyurethane enamel-coated brass C36000

SESO stem sleeve 316 SS Brass C36000

Locking dogs Xylan®-coated 316 SS powdered metal

Lubricants Silicone- and PTFE-based

Pressure-Temperature Ratings

Temperature °F (°C)

316 SS with Fluorocarbon FKM

O-rings

Brass with Buna N O-rings

QC4 QC6 QC8 QC4 QC6 QC8

Pressure Rating, psig (bar)

Coupled

70 (20) 3000 (206)

1500 (103)

750 (51.6)

2000 (137)

1000 (68.9)

500 (34.4)

250 (121)➀ 400 (204)➁ 250 (17.2)

Uncoupled and When Coupling and Uncoupling

70 (20) 250 (17.2)

➀ For brass with Buna N O-rings.➁ For 316 SS with fluorocarbon FKM O-rings.

SWAGELO

K

SWAGELO

K

SWAGELO

K

SWAGELO

K

Single-End Shutoff (SESO)

Locking dogs

Stem seal O-ring

Insert seal O-ring

Body valve O-ring

Body sleeveStem sleeve Body

Stem

Housing

Flow Direction➡ ➡

4 Quick-Connects

Select a basic ordering number and add a material designator.

Example: SS-QC4-S-200

SWAGELOK QUICK CONNECTS- MS-01-138 C-PH-376C DIM

AF flat

Dimensions shown with Swagelok tube fitting nuts finger-tight.➀ -QC4-D-200 is a two-piece assembly.

Fitting Size

Basic Ordering Numbers

Series

Flow Coefficient (Cv) Dimensions

SESO DESO Full

Flow

A

F, in. SESO DESO SESO DESO

Dimensions, in. (mm)

1/8 -QC4-S-200 -QC4-D-200➀ QC4 0.08 0.08 0.08 2.32 (58.9) 2.77 (70.4) 5/8➀

1/4 -QC4-S-400 -QC4-D-400 QC4 0.3 0.2 0.4 2.36 (59.9) 2.42 (61.5) 5/8

3/8 -QC6-S-600 -QC6-D-600 QC6 1.0 0.5 1.5 2.52 (64.0) 2.64 (67.1) 3/4

1/2 -QC8-S-810 -QC8-D-810 QC8 2.4 1.5 3.3 2.96 (75.2) 3.16 (80.3) 15/16

Dimensions, mm (in.)

6 -QC4-S-6M0 -QC4-D-6M0 QC4 0.3 0.2 0.4 59.9 (2.36) 61.5 (2.42) 5/8

10 -QC6-S-10M0 -QC6-D-10M0 QC6 1.0 0.5 1.5 67.3 (2.65) 70.4 (2.77) 3/4

12 -QC8-S-12M0 -QC8-D-12M0 QC8 2.4 1.5 3.3 75.2 (2.96) 80.3 (3.16) 15/16

Swagelok Tube Fitting

Male Pipe Threads

Pipe Size in.


Series

Flow Coefficient (Cv) Dimensions, in. (mm)

SESO DESO Full

Flow

A

F SESO DESO SESO DESO

NPT

1/8 -QC4-S-2PM -QC4-D-2PM QC4 0.3 0.2 0.4 2.07 (52.6) 2.13 (54.1) 5/8

1/4 -QC4-S-4PM -QC6-S-4PM

-QC4-D-4PM -QC6-D-4PM

QC4QC6

0.3 0.9

0.2 0.5

0.4 1.5

2.22 (56.4) 2.32 (58.9)

2.28 (57.9) 2.44 (61.9)

5/8 3/4

3/8 -QC6-S-6PM -QC6-D-6PM QC6 0.8 0.5 1.6 2.35 (59.7) 2.47 (62.7) 3/4

1/2 -QC8-S-8PM -QC8-D-8PM QC8 2.0 1.3 3.1 2.84 (72.1) 3.04 (77.2) 15/16

ISO/BSP Tapered

1/4 -QC4-S-4MT -QC4-D-4MT QC4 0.3 0.2 0.4 2.22 (56.4) 2.28 (57.9) 5/8

3/8 -QC6-S-6MT -QC6-D-6MT QC6 0.8 0.5 1.6 2.35 (59.7) 2.47 (62.7) 3/4

1/2 -QC8-S-8MT -QC8-D-8MT QC8 2.0 1.3 3.1 2.84 (72.1) 3.04 (77.2) 15/16

Pipe Size in.


Series


SESO DESO Full

Flow

A

FSESO DESO SESO DESO

NPT

1/8 -QC4-S-2PF -QC4-D-2PF QC4 0.3 0.2 0.4 2.01 (51.1) 2.07 (52.6) 5/8

1/4 -QC4-S-4PF -QC6-S-4PF

-QC4-D-4PF -QC6-D-4PF

QC4QC6

0.3 0.9

0.2 0.5

0.4 1.5

2.26 (57.4) 2.35 (59.7)

2.32 (58.9) 2.47 (62.7)

3/43/4

3/8 -QC6-S-6PF -QC6-D-6PF QC6 0.8 0.5 1.6 2.35 (59.7) 2.47 (62.7) 7/8

1/2 -QC8-S-8PF -QC8-D-8PF QC8 2.0 1.3 3.1 2.82 (71.6) 3.02 (76.7) 1 1/16

ISO/BSP Tapered

1/4 -QC4-S-4FT -QC4-D-4FT QC4 0.3 0.2 0.4 2.26 (57.4) 2.32 (58.9) 3/4

3/8 -QC6-S-6FT -QC6-D-6FT QC6 0.8 0.5 1.6 2.35 (59.7) 2.47 (62.7) 7/8

1/2 -QC8-S-8FT -QC8-D-8FT QC8 2.0 1.3 3.1 2.82 (71.6) 3.02 (76.7) 1 1/16

Female Pipe Threads

Material Designator

316 SS SS

Brass B

Ordering Information and Dimensions, QC SeriesDimensions are for reference only and are subject to change.

Stems

Quick-Connects 5

Full-Flow Quick-ConnectsA full-flow QC series quick-connect consists of a SESO stem and a full-flow body.

To order a SESO stem, select a basic ordering number and add a material designator.

Example: SS-QC4-S-200

To order a full-flow body, select a basic ordering number and add a material designator and MB.

Example: SS-QC4-B-200MB

A

H

Insertion DepthTo calculate overall length in the coupled position, subtract the insertion depth from any overall stem and body combination length.

Series

Depth, in. (mm)

SESO DESO

QC4 1.09 (27.7) 1.15 (29.2)

QC6 1.18 (30.0) 1.30 (33.0)

QC8 1.48 (37.6) 1.68 (42.7)

Pipe Size in.

Basic Ordering Number Series


A H

NPT

1/8 -QC4-B-2PF QC4 2.16 (54.9) 0.91 (23.1)

1/4 -QC4-B-4PF -QC6-B-4PF

QC4QC6

2.42 (61.5) 2.54 (64.5)

0.91 (23.1) 1.03 (26.2)

3/8 -QC6-B-6PF QC6 2.57 (65.3) 1.03 (26.2)

1/2 -QC8-B-8PF QC8 3.22 (81.8) 1.21 (30.7)

ISO/BSP Tapered

1/4 -QC4-B-4FT QC4 2.42 (61.5) 0.91 (23.1)

3/8 -QC6-B-6FT QC6 2.57 (65.3) 1.03 (26.2)

1/2 -QC8-B-8FT QC8 3.22 (81.8) 1.21 (30.7)

Pipe Size in.



A H

NPT

1/8 -QC4-B-2PM QC4 2.01 (51.1) 0.91 (23.1)

1/4 -QC4-B-4PM -QC6-B-4PM

QC4QC6

2.16 (54.9) 2.38 (60.5)

0.91 (23.1) 1.03 (26.2)

3/8 -QC6-B-6PM QC6 2.38 (60.5) 1.03 (26.2)

1/2 -QC8-B-8PM QC8 2.97 (75.4) 1.21 (30.7)

ISO/BSP Tapered

1/4 -QC4-B-4MT QC4 2.16 (54.9) 0.91 (23.1)

3/8 -QC6-B-6MT QC6 2.38 (60.5) 1.03 (26.2)

1/2 -QC8-B-8MT QC8 2.97 (75.4) 1.21 (30.7)


Male Pipe Threads

Female Pipe Threads

BodiesFitting Size


Dimensions

A H


1/8 -QC4-B-200 QC4 2.26 (57.4) 0.91 (23.1)

1/4 -QC4-B-400 QC4 2.30 (58.4) 0.91 (23.1)

3/8 -QC6-B-600 QC6 2.58 (65.5) 1.03 (26.2)

1/2 -QC8-B-810 QC8 3.09 (78.5) 1.21 (30.7)


6 -QC4-B-6M0 QC4 58.4 (2.30) 23.1 (0.91)

10 -QC6-B-10M0 QC6 68.1 (2.68) 26.2 (1.03)

12 -QC8-B-12M0 QC8 78.5 (3.09) 30.7 (1.21)

Dimensions shown with Swagelok tube fitting nuts finger-tight.

See next page for bulkhead end connections.

6 Quick-Connects

Ordering Information

To order, select a basic ordering number and add SS for stainless steel or B for brass.

Example: SS-QC4-SP

Keyed Protectors

To order a keyed protector, add a key designator from the table on page 7 to the ordering number.

Example: SS-QC4-SPK1

Options, QC Series

Stem and Body ProtectorsStem and body protectors guard against damage and contaminants when bodies and stems are uncoupled.

Protectors are not pressure-containing devices; for pressure-retaining protectors, contact your authorized Swagelok representative.

Standard KeyedStandard Keyed

Body ProtectorsStem Protectors

Materials

Component Material

Protector 316 SS or plated brass C36000

Lanyard 302 SS

Lanyard clamps 304 SS

SWAGELOK QUICK CONNECTS- MS-01-138 C-PH-377 DIM

A

H

Ordering Information and Dimensions, QC Series Dimensions are for reference only and are subject to change.

Bulkhead Bodies


SWAGELOK QUICK CONNECTS- MS-01-138 C-PH-395A DIM

F flat

Fitting Size


Series

Dimensions

A

F

Max Panel

Thickness

Min Panel

Hole Dia SESO DESO SESO DESO


1/4 -QC4-S1-400 -QC4-D1-400 QC4 2.74 (69.6) 2.80 (71.1) 5/8 0.25 (6.4) 15/32 (11.9)

3/8 -QC6-S1-600 -QC6-D1-600 QC6 2.92 (74.2) 3.07 (78.0) 3/4 0.27 (6.9) 19/32 (15.1)

1/2 -QC8-S1-810 -QC8-D1-810 QC8 3.43 (87.1) 3.63 (92.2) 15/16 0.26 (6.6) 25/32 (19.8)


6 -QC4-S1-6M0 -QC4-D1-6M0 QC4 69.6 (2.74) 71.1 (2.80) 16 6.4 (0.25) 11.5 (29/64)

10 -QC6-S1-10M0 -QC6-D1-10M0 QC6 77.7 (3.06) 78.7 (3.10) 22 6.9 (0.27) 16.7 (21/32)

12 -QC8-S1-12M0 -QC8-D1-12M0 QC8 87.1 (3.43) 92.2 (3.63) 24 6.6 (0.26) 19.6 (49/64)

Swagelok Tube Fitting Fitting Size


Dimensions

A H

Max Panel

Thickness

Min Panel

Hole Dia


1/4 -QC4-B1-400 QC4 2.67 (67.8) 0.91 (23.1) 0.25 (6.4) 15/32 (11.9)

3/8 -QC6-B1-600 QC6 2.98 (75.7) 1.03 (26.2) 0.27 (6.9) 19/32 (15.1)

1/2 -QC8-B1-810 QC8 3.56 (90.4) 1.21 (30.7) 0.26 (6.6) 25/32 (19.8)


6 -QC4-B1-6M0 QC4 67.8 (2.67) 23.1 (0.91) 6.4 (0.25) 11.9 (15/32)

10 -QC6-B1-10M0 QC6 75.9 (2.99) 26.2 (1.03) 6.9 (0.27) 16.7 (21/32)

12 -QC8-B1-12M0 QC8 90.4 (3.56) 30.7 (1.21) 6.6 (0.26) 19.6 (49/64)

Bulkhead Stems

A

Series

Basic Ordering Numbers Stem

Protector Body

Protector

QC4 -QC4-SP -QC4-BP

QC6 -QC6-SP -QC6-BP

QC8 -QC8-SP -QC8-BP



Quick-Connects 7


To order, replace B in the ordering number with B2.

Example: SS-QC4-B2-400

B2 style bulkhead body is available only with low-profile IS sleeve.

Dimensions

Series


G Max Panel Thickness

Min Panel Hole Dia

QC4 7/8 0.20 (5.1) 23/32 (18.3)

QC6 15/16 0.25 (6.4) 27/32 (21.4)

QC8 1 1/8 0.31 (7.9) 1 1/32 (26.2)

Low-Profile Sleeve

This option is available for use in areas where space is limited.


To order, add IS to the ordering number.

Example: SS-QC4-B-400IS

Bulkhead Bodies with Two Panel Nuts Low-profile

sleeve

Options, QC Series

Keyed QC SeriesSwagelok keyed quick-connects provide a positive mechanical lockout system to prevent accidental intermixing of different lines in multifluid or multipressure systems.

Features

■ Keyed quick-connects will not interchange with any other Swagelok keyed quick-connects

■ If an attempt is made to couple unlike keys, the valve system will not open.

■ Stems and bodies are color coded and numbered for easy identification.

QC Series Key Numbers and Sleeve Outside Diameters

for use in calculating alignment positions when panel mounting

Key Color

Key Number

and Designator

Sleeve Outside Diameter, in. (mm)

QC4 QC6 QC8

Body Stem Body Stem Body Stem

Black K1 0.96 (24.4) 0.82 (20.8) 1.13 (28.7) 0.99 (25.1) 1.26 (32.0) 1.10 (27.9)

Orange K2 0.99 (25.1) 0.85 (21.6) 1.16 (29.5) 1.02 (25.9) 1.29 (32.8) 1.14 (29.0)

Green K3 1.02 (25.9) 0.88 (22.4) 1.19 (30.2) 1.05 (26.7) 1.32 (33.5) 1.17 (29.7)

Yellow K4 1.05 (26.7) 0.91 (23.1) 1.22 (31.0) 1.08 (27.4) 1.35 (34.3) 1.20 (30.5)

Blue K5 1.08 (27.4) 0.94 (23.9) 1.24 (31.5) 1.11 (28.2) 1.38 (35.1) 1.23 (31.2)

White K6 1.11 (28.2) 0.97 (24.6) 1.28 (32.5) 1.14 (29.0) 1.41 (35.8) 1.26 (32.0)

Purple K7 1.14 (29.0) 1.00 (25.4) 1.31 (33.3) 1.17 (29.7) 1.44 (36.6) 1.29 (32.8)

Brown K8 1.17 (29.7) 1.03 (26.2) 1.34 (34.0) 1.20 (30.5) 1.47 (37.3) 1.32 (33.5)

Keyed sleeve

B2 bulkhead female NPT

G nut hex

Additional End ConnectionsOther end connections may be available from the factory as two-piece components. Contact your authorized Swagelok representative for information.

8 Quick-Connects

Features■ Compact coupling offers full flow without orifice restrictions.

■ O-ring is easily replaced without disassembling body.

Ordering Information and Dimensions, QF Series Dimensions are for reference only and are subject to change.

Full Flow Quick-Connects QF Series


A

F flat


Component

Material

316 SS Brass

Body, stem 316 SS Brass C36000

Spring, snap ring, locking balls 316 SS

Sleeve 316 SS Brass C36000

O-ring Fluorocarbon FKM Buna N


Wetted components listed in italics.Other O-ring materials and lubricants available. Contact your authorized Swagelok representative.Bidirectional flow ➡➡


Example: SS-QF4-S-400

Material Designator

316 SS SS

Brass B



Flow Coefficient

(Cv)

Dimensions

A F in.

Min Orifice


1/4 -QF4-S-400 QF4 2.2 1.77 (45.0) 9/16 0.19 (4.8)

3/8 -QF4-S-600 -QF8-S-600

QF4 QF8

2.8 2.9

1.77 (45.0) 1.88 (47.8)

11/16 7/8

0.24 (6.1) 0.28 (7.1)

1/2 -QF8-S-810 QF8 13.0 1.99 (50.5) 7/8 0.41 (10.4)

3/4 -QF12-S-1210 QF12 26.0 2.15 (54.6) 1 1/16 0.62 (15.7)

1 -QF16-S-1610 QF16 45.0 2.45 (62.2) 1 3/8 0.88 (22.4)


6 -QF4-S-6M0 QF4 2.2 45.0 (1.77) 9/16 4.8 (0.19)

Stems

Pipe Size in.


Flow Coefficient

(Cv)


A F Min

Orifice

NPT1/4 -QF4-S-4PF QF4 1.7 1.60 (40.6) 3/4 0.24 (6.1)

3/8 -QF4-S-6PF -QF8-S-6PF

QF4 QF8

1.7 7.1

1.67 (42.4) 1.59 (40.4)

7/8 1 1/16

0.24 (6.1) 0.47 (11.9)

1/2 -QF8-S-8PF QF8 11.5 1.82 (46.2) 1 1/16 0.50 (12.7)

3/4 -QF12-S-12PF QF12 23.6 2.08 (52.8) 1 5/16 0.72 (18.3)

1 -QF16-S-16PF QF16 39.0 2.49 (63.2) 1 5/8 0.88 (22.4)

ISO/BSP Tapered1/4 -QF4-S-4FT QF4 1.7 1.60 (40.6) 3/4 0.24 (6.1)

1/2 -QF8-S-8FT QF8 11.5 1.82 (46.2) 1 1/16 0.50 (12.7)

ISO/BSP Parallel1/4 -QF4-S-4FS QF4 1.7 1.60 (40.6) 3/4 0.24 (6.1)

1/2 -QF8-S-8FS QF8 11.5 1.82 (46.2) 1 1/16 0.50 (12.7)

Female Pipe Threads


Quick-Connects 9

Bodies

Warning: Do not uncouple under pressure.

SWAGELOK QUICK CONNECTS- MS-01-138 C-PH-421B DIM

A

S

F flat


Series Depth in. (mm)

QF4 0.78 (19.8)

QF8 0.81 (20.6)

QF12 0.90 (22.9)

QF16 0.94 (23.9)

➀ Pressure ratings may be limited by end connections.➁ For brass with Buna N O-rings.➂ For 316 SS with fluorocarbon FKM O-rings.

Pressure-Temperature Ratings➀


316 SS with Fluorocarbon FKM

O-rings


QF4 QF8 QF12 QF16 QF4 QF8 QF12 QF16


Coupled

70 (20) 6000 (413)

4000 (275)

4000 (275)

3000 (206)

2000 (137)

250 (121)➁ 400 (204)➂ 100 (6.8)



Dimensions

A Fin. S

Min Orifice


1/4 -QF4-B-400 QF4 1.80 (45.7) 11/16 0.87 (22.1) 0.19 (4.8)

3/8 -QF4-B-600 -QF8-B-600

QF4 QF8

1.81 (46.0) 2.17 (55.1)

11/16 1 1/16

0.87 (22.1) 1.30 (33.0) 0.28 (7.1)

1/2 -QF8-B-810 QF8 2.23 (56.6) 1 1/16 1.30 (33.0) 0.47 (11.9)

3/4 -QF12-B-1210 QF12 2.45 (62.2) 1 1/2 1.66 (42.2) 0.62 (15.7)

1 -QF16-B-1610 QF16 2.75 (69.9) 1 11/16 1.88 (47.8) 0.88 (22.4)


6 -QF4-B-6M0 QF4 45.7 (1.80) 11/16 22.1 (0.87) 4.8 (0.19)

Pipe Size in.



A F S Min

Orifice

NPT1/4 -QF4-B-4PF QF4 1.50 (38.1) 3/4 0.87 (22.1) 0.38 (9.7)

3/8 -QF4-B-6PF -QF8-B-6PF

QF4 QF8

1.63 (41.4) 1.73 (43.9)

7/8 1 1/16

0.87 (22.1) 1.30 (33.0)

0.38 (9.7) 0.59 (15.0)

1/2 -QF8-B-8PF QF8 1.73 (43.9) 1 1/16 1.30 (33.0) 0.63 (16.0)

3/4 -QF12-B-12PF QF12 1.89 (48.0) 1 1/2 1.66 (42.2) 0.88 (22.4)

1 -QF16-B-16PF QF16 2.12 (53.8) 1 11/16 1.88 (47.8) 1.06 (26.9)

ISO/BSP Tapered1/4 -QF4-B-4FT QF4 1.50 (38.1) 3/4 0.87 (22.1) 0.38 (9.7)

1/2 -QF8-B-8FT QF8 1.73 (43.9) 1 11/16 1.30 (33.0) 0.63 (16.0)

ISO/BSP Parallel1/4 -QF4-B-4FS QF4 1.50 (38.1) 3/4 0.87 (22.1) 0.38 (9.7)

1/2 -QF8-B-8FS QF8 1.73 (43.9) 1 11/16 1.30 (33.0) 0.63 (16.0)

Female Pipe Threads


See next page for more end connections.

10 Quick-Connects

Options, QF Series

Stem and Body ProtectorsStem and body protectors guard against damage and contaminants when bodies and stems are uncoupled.

Protectors are not pressure-containing devices; for pressure-retaining protectors, contact your authorized Swagelok representative.

Body Protector Stem Protector


To order, select a basic ordering number and add SS for stainless steel or B for brass.

Example: SS-QF4-SP

Materials

Component Material

Protector 316 SS or plated brass C36000

Lanyard 302 SS

Lanyard clamps 304 SSSeries

Basic Ordering Number Stem

Protector Body

Protector

QF4 -QF4-SP -QF4-BP

QF8 -QF8-SP -QF8-BP

QF12 -QF12-SP -QF12-BP

QF16 -QF16-SP -QF16-BP

Ordering Information and Dimensions, QF Series Dimensions are for reference only and are subject to change.

Bodies

Stems

Male Pipe Threads

Male Pipe Threads

➀ Include a female 60° cone profile. They accept a 60° male cone with female swivel nut.

Pipe Size in.



A F S Min

Orifice

NPT

1/4 -QF4-B-4PM QF4 1.57 (39.9) 11/16 0.87 (22.1) 0.25 (6.4)

3/8 -QF4-B-6PM -QF8-B-6PM

QF4 QF8

1.57 (39.9) 1.83 (46.5)

11/16 1 1/16

0.87 (22.1) 1.30 (33.0)

0.37 (9.4) 0.41 (10.4)

1/2 -QF8-B-8PM QF8 2.08 (52.8) 1 1/16 1.30 (33.0) 0.50 (12.7)

3/4 -QF12-B-12PM QF12 2.33 (59.2) 1 1/2 1.66 (42.2) 0.72 (18.3)

1 -QF16-B-16PM QF16 2.65 (67.3) 1 11/16 1.88 (47.8) 0.88 (22.4)

ISO/BSP Tapered

1/4 -QF4-B-4MT QF4 1.57 (39.9) 11/16 0.87 (22.1) 0.24 (6.1)

1/2 -QF8-B-8MT QF8 2.08 (52.8) 1 1/16 1.30 (33.0) 0.50 (12.7)

1 -QF16-B-16MT QF16 2.65 (67.3) 1 11/16 1.88 (47.8) 0.88 (22.4)

ISO/BSP Parallel➀

1/4 -QF4-B-4MS QF4 1.80 (45.7) 3/4 0.87 (22.1) 0.24 (6.1)

1/2 -QF8-B-8MS QF8 2.08 (52.8) 1 11/16 1.30 (33.0) 0.47 (11.9)

Pipe Size in.


Flow Coefficient

(Cv)


A F Min

Orifice

NPT

1/4 -QF4-S-4PM QF4 1.7 1.59 (40.4) 9/16 0.24 (6.1)

3/8 -QF4-S-6PM -QF8-S-6PM

QF4 QF8

1.7 7.1

1.59 (40.4) 1.65 (41.9)

11/16 7/8

0.24 (6.1) 0.41 (10.4)

1/2 -QF8-S-8PM QF8 11.5 1.84 (46.7) 7/8 0.50 (12.7)

3/4 -QF12-S-12PM QF12 23.6 2.03 (51.6) 1 1/16 0.72 (18.3)

1 -QF16-S-16PM QF16 39.0 2.35 (59.7) 1 3/8 0.88 (22.4)

ISO/BSP Tapered

1/4 -QF4-S-4MT QF4 1.7 1.59 (40.4) 9/16 0.24 (6.1)

1/2 -QF8-S-8MT QF8 11.5 1.84 (46.7) 7/8 0.50 (12.7)

1 -QF16-S-16MT QF16 39.0 2.35 (59.7) 1 3/8 0.88 (22.4)

ISO/BSP Parallel➀

1/4 -QF4-S-4MS QF4 1.7 1.60 (40.6) 3/4 0.24 (6.1)

1/2 -QF8-S-8MS QF8 11.5 1.82 (46.2) 1 1/16 0.50 (12.7)

➀ Include a female 60° cone profile. They accept a 60° male cone with female swivel nut.

Quick-Connects 11

Features■ Lightweight, compact design offers

fingertip operation.

■ Low dead volume reduces spillage and air inclusion.

Miniature Quick-Connects QM Series

Spillage and Air Inclusion0.1 cm3

Maximum Flow Rate1 U.S. gal/min (3.8 L/min) water at 70°F (20°C)

SESO DESO

SWAGELOK QUICK CONNECTS- MS-01-138 C-PH-811 DIM

AF flat


F flat

A


Component

Material

316 SS Brass

Body, body insert, DESO adapter, stem,

body valve, DESO valve, housing 316 SS

Brass C36000

SESO stem insert, valve stop Brass C26000

DESO stem fin, springs 316 SS

O-rings Fluorocarbon FKM Buna N

Sleeve 316 SS Brass C36000

Locking balls, snap rings

316 SS


Wetted components listed in italics.Other O-ring materials and lubricants available.

Pressure-Temperature Ratings


316 SS with Fluorocarbon FKM O-rings



Coupled

70 (20) 4000 (275) 2000 (137)

250 (121)➀ 400 (204)➁ 100 (6.8)

Uncoupled and When Coupling and Uncoupling

70 (20) 100 (6.8)

➀ For brass with Buna N O-rings. ➁ For 316 SS with fluorocarbon FKM O-rings.

Stem

Body valve O-ring

Body sleeve

DESO valve spring DESO valve O-ring Body valve springHousing

Adapter seal

O-ring

Stem seal O-ring Body

Flow Direction➡ ➡

Ordering Information and Dimensions, QM SeriesDimensions are for reference only and are subject to change.


Example: SS-QM2-S-100

Material Designator

316 SS SS

Brass B

Fitting Size in.


Series


SESO DESO Full

Flow

A

F SESO DESO SESO DESO 1/16 1/8

-QM2-S-100 -QM2-S-200

-QM2-D-100 -QM2-D-200 QM2 0.06 0.05 0.06 1.18 (30.0)

1.29 (32.8) 1.76 (44.7) 1.87 (47.5) 7/16


Stems


See next page for more end connections.

12 Quick-Connects


Depth, in. (mm)

SESO DESO

0.47 (11.9) 0.53 (13.5)

NPT Size in.


Series


SESO DESO Full

Flow

A


-QM2-S-1PM -QM2-S-2PM

-QM2-D-1PM -QM2-D-2PM QM2 0.06 0.05 0.06 1.03 (26.2) 1.61 (40.9) 7/16

Full-Flow Quick-ConnectsA full-flow QM series quick-connect consists of a SESO stem and a full-flow body.

To order a SESO stem, select a basic ordering number and add a material designator.

Example: SS-QM2-S-200

To order a full-flow body, select a basic ordering number and add a material designator and MB.

Example: SS-QM2-B-200MB

SWAGELOK QUICK CONNECTS- MS-01-138 C-PH-420B DIM

A

F flat


A

F flat

Ordering Information and Dimensions, QM SeriesDimensions are for reference only and are subject to change.

Male NPT

Stems

NPT Size in.


Series


SESO DESO Full

Flow

A


-QM2-S-1PF -QM2-S-2PF

-QM2-D-1PF -QM2-D-2PF QM2 0.06 0.05 0.06 1.03 (26.2)

1.61 (40.9)1.81 (46.0)

7/16 7/16

Female NPT

Bodies

Male NPTNPT Size in.



A F 1/16 1/8

-QM2-B-1PM -QM2-B-2PM QM2 1.42 (36.1)

1.44 (36.6) 7/16

Female NPTNPT Size in.



A F 1/16 1/8

-QM2-B-1PF -QM2-B-2PF QM2 1.43 (36.3)

1.62 (41.1) 7/16 9/16

Swagelok Bulkhead Tube Fitting

Fitting Size in.



A F

1/8 -QM2-B1-200 QM2 2.09 (53.1) 7/16

Swagelok Tube FittingFitting Size in.



A F 1/16 1/8

-QM2-B-100 -QM2-B-200 QM2 1.50 (38.1)

1.70 (43.2) 7/16


Dimensions shown with Swagelok tube fitting nuts finger-tight.Maximum panel thickness is 0.25 in. (6.4 mm); minimum panel hole diameter is 21/64 in. (8.3 mm).

Quick-Connects 13

PTFE-Sealed Quick-Connects QTM Series


Component

Material

316 SS Alloy 400

Body Xylan-coated 316 SS

Xylan-coated alloy R-405

Slide, stem, stem adapter, body valve,

DESO valve

316 SS

Alloy R-405

Packing gland, body bolt, body valve cap,

DESO valve cap, DESO stem fins

Alloy 400/R-405

Eyelet, body insert, DESO valve post

—

Snap rings Alloy X-750

Body fin (QTM4 only)

PTFE-coated powdered metal 300 series SS

—

Springs 316 SS and Elgiloy ®

Alloy X-750 and Elgiloy

Packing seal, stem seal, adapter seal Dyneon™ TFM™ 1600

Body valve seal, DESO valve seal Virgin PTFE

Packing backup ring Filled PTFE

Locking dogs 316 SS or CF8M M-35-1

Rear sleeve, front sleeve 316 SS

Alloy R-405

Slide hooks Alloy 400/R-405

Lubricants PTFE-based

Wetted components listed in italics.

Features■ Product qualification tests are based

on ANSI B93.51M.

■ Flush valve design reduces air inclusion and spillage.

■ Locking dog mechanism with large contact area retains stem.

■ Seals are recessed for protection.

■ Keyed option is available.

■ Push-to-connect design enables quick, simple operation.

Pressure-Temperature Ratings➀


316 SS Alloy 400

QTM2 QTM4 QTM8 QTM2


Coupled0 to 120 (–17 to 48)

4500 (310)

3200 (220)

3200 (220)

Uncoupled

0 to 120 (–17 to 48)

1000 (68.9)

1000 (68.9)

When Coupling And Uncoupling

70 (20) 250 (17.2) 100 (6.8) 50 (3.4) 250 (17.2)

➀ Pressure ratings may be limited by end connections.

Slide

Locking dogs

Body valve seal

Packing seal

Stem seal

DESO valve seal

Adapter seal

Slide hook

Bidirectional flow ➡➡

Spillage and Air Inclusion

SeriesSpillage

cm3Air Inclusion

cm3

QTM2 0.1 0.1

QTM4 0.2 0.4

QTM8 1.0 2.0

Maximum Flow Rateat 70°F (20°C)

Series

Water Flow U.S. gal/min

(L/min)

QTM2 15 (56)

QTM4 35 (130)

QTM8 50 (180)

14 Quick-Connects

Ordering Information and Dimensions, QTM SeriesDimensions are for reference only and are subject to change.

A

F flat


Stems

Select an ordering number.

Fitting Size

Ordering Numbers

Series

Flow Coefficient (Cv) Dimensions

SESO DESO SESO DESO A F


1/4 SS-QTM2-S-400➀ SS-QTM4-S-400

SS-QTM2-D-400➀ SS-QTM4-D-400

QTM2 QTM4

0.7 0.9

0.6 0.8

2.02 (51.3) 2.61 (66.3)

5/8 15/16

3/8 SS-QTM2-S-600 SS-QTM4-S-600

SS-QTM2-D-600 SS-QTM4-D-600

QTM2 QTM4

0.9 1.7

0.8 1.6

2.08 (52.8) 2.67 (67.8)

11/16 15/16

1/2 SS-QTM8-S-810 SS-QTM8-D-810 QTM8 4.2 3.1 3.06 (77.7) 1 5/16

3/4 SS-QTM8-S-1210 SS-QTM8-D-1210 QTM8 6.7 6.5 3.06 (77.7) 1 5/16

1 SS-QTM8-S-1610 SS-QTM8-D-1610 QTM8 9.0 7.8 3.27 (83.1) 1 3/8


6 SS-QTM2-S-6M0➀ SS-QTM4-S-6M0

SS-QTM2-D-6M0➀ SS-QTM4-D-6M0

QTM2 QTM4

0.7 0.9

0.6 0.8

51.3 (2.02) 66.3 (2.61)

16 24

8 SS-QTM2-S-8M0 SS-QTM2-D-8M0 QTM2 0.9 0.8 53.1 (2.09) 11/16 in.

10 SS-QTM4-S-10M0 SS-QTM4-D-10M0 QTM4 1.7 1.6 68.1 (2.68) 24

12 SS-QTM8-S-12M0 SS-QTM8-D-12M0 QTM8 4.2 3.1 77.7 (3.06) 35

Dimensions shown with Swagelok tube fitting nuts finger-tight.➀ To order alloy 400 with PTFE seals, replace SS in the ordering number with M. Example: M-QTM2-S-400

Male Pipe ThreadsPipe Size in.

Ordering Numbers

Series

Flow Coefficient (Cv)

Dimensions in. (mm)


NPT

1/4 SS-QTM2-S-4PM➀ SS-QTM4-S-4PM

SS-QTM2-D-4PM➀ SS-QTM4-D-4PM

QTM2 QTM4

0.2 1.4

0.2 1.4

1.91 (48.5) 2.46 (62.5)

5/8 15/16

3/8 SS-QTM2-S-6PM SS-QTM4-S-6PM

SS-QTM2-D-6PM SS-QTM4-D-6PM

QTM2 QTM4

0.7 1.8

0.6 1.7

2.04 (51.8) 2.46 (62.5)

3/4 15/16

1/2 SS-QTM8-S-8PM SS-QTM8-D-8PM QTM8 5.1 4.4 2.78 (70.6) 1 5/16

3/4 SS-QTM8-S-12PM SS-QTM8-D-12PM QTM8 8.5 7.8 2.78 (70.6) 1 5/16

1 SS-QTM8-S-16PM SS-QTM8-D-16PM QTM8 ➁ ➁ 3.03 (77.0) 1 3/8

ISO/BSP Tapered

1/4 SS-QTM2-S-4MT SS-QTM4-S-4MT

SS-QTM2-D-4MT SS-QTM4-D-4MT

QTM2 QTM4

0.2 1.4

0.2 1.4

1.91 (48.5) 2.46 (62.5)

5/8 15/16

1/2 SS-QTM8-S-8MT SS-QTM8-D-8MT QTM8 5.1 4.4 2.78 (70.6) 1 5/16

ISO/BSP Parallel➂

1/8 SS-QTM2-S-2MS SS-QTM2-D-2MS QTM2 0.5 0.4 1.73 (43.9) 5/8

1/4 SS-QTM2-S-4MS SS-QTM4-S-4MS

SS-QTM2-D-4MS SS-QTM4-D-4MS

QTM2 QTM4

0.6 1.2

0.6 1.2

2.04 (51.8) 2.48 (63.0)

3/4 15/16

1/2 SS-QTM8-S-8MS SS-QTM8-D-8MS QTM8 4.8 3.9 2.78 (70.6) 1 5/16

JIC 37° Flare

1/4 SS-QTM4-S-4AN SS-QTM4-D-4AN QTM4 ➁ ➁ 2.48 (63.0) 15/16

1/2 SS-QTM8-S-8AN SS-QTM8-D-8AN QTM8 4.2 2.7 2.78 (70.6) 1 5/16

➀ To order alloy 400 with PTFE seals, replace SS in the ordering number with M. Example: M-QTM2-S-4PM➁ For Cv, contact your authorized Swagelok representative.➂ Include a female 60° cone profile. They accept a 60° male cone with female swivel nut.

Quick-Connects 15

Bodies

A

F flat

D dia

Fitting Size

Ordering Number Series

Dimensions

A D F


1/4 SS-QTM2A-B-400➀ SS-QTM4A-B-400

QTM2 QTM4

3.16 (80.3) 4.08 (104)

1.12 (28.4) 1.68 (42.7)

9/16 7/8

3/8 SS-QTM2A-B-600 SS-QTM4A-B-600

QTM2 QTM4

3.25 (82.6) 4.08 (104)

1.12 (28.4) 1.68 (42.7)

3/4 7/8

1/2 SS-QTM8A-B-810 QTM8 4.30 (109) 2.00 (50.8) 1 1/8

3/4 SS-QTM8A-B-1210 QTM8 4.30 (109) 2.00 (50.8) 1 1/8

1 SS-QTM8A-B-1610 QTM8 4.58 (116) 2.00 (50.8) 1 3/8


6 SS-QTM2A-B-6M0➀ SS-QTM4A-B-6M0

QTM2 QTM4

80.3 (3.16) 104 (4.08)

28.4 (1.12)42.7 (1.68)

15 24

8 SS-QTM2A-B-8M0 QTM2 80.3 (3.16) 28.4 (1.12) 15

10 SS-QTM4A-B-10M0 QTM4 104 (4.09) 42.7 (1.68) 24

12 SS-QTM8A-B-12M0 QTM8 109 (4.31) 50.8 (2.00) 30


Pipe Size in.



A D F

NPT

1/4 SS-QTM2A-B-4PM➀ SS-QTM4A-B-4PM

QTM2 QTM4

3.02 (76.7) 3.89 (98.8)

1.12 (28.4) 1.68 (42.7)

9/16 7/8

3/8 SS-QTM2A-B-6PM SS-QTM4A-B-6PM

QTM2 QTM4

3.07 (78.0) 3.89 (98.8)

1.12 (28.4) 1.68 (42.7)

3/4 7/8

1/2 SS-QTM8A-B-8PM QTM8 4.20 (107) 2.00 (50.8) 1 1/8

3/4 SS-QTM8A-B-12PM QTM8 4.19 (106) 2.00 (50.8) 1 1/8

1 SS-QTM8A-B-16PM QTM8 4.48 (114) 2.00 (50.8) 1 3/8

ISO/BSP Tapered

1/4 SS-QTM2A-B-4MT SS-QTM4A-B-4MT

QTM2 QTM4

3.07 (78.0) 3.89 (98.8)

1.12 (28.4) 1.68 (42.7)

3/4 7/8

1/2 SS-QTM8A-B-8MT QTM8 4.20 (107) 2.00 (50.8) 1 1/8

ISO/BSP Parallel

1/4 SS-QTM2A-B-4MS SS-QTM4A-B-4MS

QTM2 QTM4

2.96 (75.2) 3.89 (98.8)

1.12 (28.4) 1.68 (42.7)

3/4 7/8

1/2 SS-QTM8A-B-8MS QTM8 4.20 (107) 2.00 (50.8) 1 1/8

JIC 37° Flare➁

1/4 SS-QTM4A-B-4AN QTM4 3.89 (98.8) 1.68 (42.7) 7/8

1/2 SS-QTM8A-B-8AN QTM8 4.20 (107) 2.00 (50.8) 1 1/8

Male Pipe Threads

➀ To order alloy 400 with PTFE seals, replace SS in the ordering number with M. Example: M-QTM2A-B-4PM➁ Include a female 60° cone profile. They accept a 60° male cone with female swivel nut.


Series Depth in. (mm)

QTM2 1.26 (32.1)

QTM4 0.95 (24.0)

QTM8 1.15 (29.1)

Dimensions shown with Swagelok tube fitting nuts finger-tight.➀ To order alloy 400 with PTFE seals, replace SS in the ordering number with M. Example: M-QTM2-B-400

Quick-Connects 16


Female Pipe Threads

Stems

Pipe Size

Ordering Numbers

Series


Dimensions in. (mm)


NPT

1/8 SS-QTM2-S-2PF SS-QTM2-D-2PF QTM2 0.7 0.7 1.73 (43.9) 5/8

1/4 SS-QTM2-S-4PF➀ SS-QTM4-S-4PF

SS-QTM2-D-4PF➀ SS-QTM4-D-4PF

QTM2 QTM4

0.2 1.4

0.2 1.4

2.04 (51.8) 2.36 (59.9)

3/4 15/16

3/8 SS-QTM2-S-6PF SS-QTM4-S-6PF

SS-QTM2-D-6PF SS-QTM4-D-6PF

QTM2 QTM4

0.7 1.8

0.6 1.7

2.14 (54.4) 2.48 (63.0)

7/8 15/16

1/2 SS-QTM8-S-8PF SS-QTM8-D-8PF QTM8 5.1 4.4 2.66 (67.6) 1 5/16

3/4 SS-QTM8-S-12PF SS-QTM8-D-12PF QTM8 8.5 7.8 2.66 (67.6) 1 5/16

1 SS-QTM8-S-16PF SS-QTM8-D-16PF QTM8 ➁ ➁ 3.17 (80.5) 1 5/8

ISO/BSP Tapered

1/4 SS-QTM2-S-4FT SS-QTM4-S-4FT

SS-QTM2-D-4FT SS-QTM4-D-4FT

QTM2 QTM4

0.2 1.4

0.2 1.4

2.04 (51.8) 2.36 (59.9)

3/4 5/16

1/2 SS-QTM8-S-8FT SS-QTM8-D-8FT QTM8 5.1 4.4 2.66 (67.6) 1 5/16

ISO/BSP Parallel

1/8 SS-QTM2-S-2FS SS-QTM2-D-2FS QTM2 0.5 0.4 1.73 (43.9) 5/8

1/4 SS-QTM2-S-4FS SS-QTM4-S-4FS

SS-QTM2-D-4FS SS-QTM4-D-4FS

QTM2 QTM4

0.6 1.2

0.6 1.2

2.04 (51.8) 2.62 (66.5)

3/4 5/16

1/2 SS-QTM8-S-8FS SS-QTM8-D-8FS QTM8 4.8 3.9 2.66 (67.6) 1 5/16

➀ To order alloy 400 with PTFE seals, replace SS in the ordering number with M. Example: M-QTM2-S-4PF➁ For Cv, contact your authorized Swagelok representative.

Pipe Size



A D F

NPT

1/8 SS-QTM2A-B-2PF QTM2 2.60 (66.0) 1.12 (28.4) 9/16

1/4 SS-QTM2A-B-4PF➀ SS-QTM4A-B-4PF

QTM2 QTM4

2.99 (75.9) 3.35 (85.1)

1.12 (28.4) 1.68 (42.7)

3/4 7/8

3/8 SS-QTM2A-B-6PF SS-QTM4A-B-6PF

QTM2 QTM4

3.04 (77.2) 3.35 (85.1)

1.12 (28.4) 1.68 (42.7)

7/8 7/8

1/2 SS-QTM8A-B-8PF QTM8 3.53 (89.7) 2.00 (50.8) 1 1/8

3/4 SS-QTM8A-B-12PF QTM8 4.02 (102) 2.00 (50.8) 1 5/16

1 SS-QTM8A-B-16PF QTM8 4.40 (112) 2.00 (50.8) 1 5/8

ISO/BSP Tapered

1/4 SS-QTM2A-B-4FT SS-QTM4A-B-4FT

QTM2 QTM4

2.99 (75.9) 3.35 (85.1)

1.12 (28.4) 1.68 (42.7)

3/4 7/8

1/2 SS-QTM8A-B-8FT QTM8 3.92 (99.6) 2.00 (50.8) 1 1/8

ISO/BSP Parallel

1/8 SS-QTM2A-B-2FS QTM2 2.60 (66.0) 1.12 (28.4) 9/16

1/4 SS-QTM2A-B-4FS SS-QTM4A-B-4FS

QTM2 QTM4

2.99 (75.9) 3.35 (85.1)

1.12 (28.4) 1.68 (42.7)

3/4 7/8

1/2 SS-QTM8A-B-8FS QTM8 3.53 (89.7) 2.00 (50.8) 1 1/8

Female Pipe Threads

Bodies

➀ To order alloy 400 with PTFE seals, replace SS in the ordering number with M. Example: M-QTM2-S-4PF

See next page for bulkhead end connections.

17 Quick-Connects


A

F flat


Fitting Size

Ordering Numbers

Series


Dimensions

A FMax Panel Thickness

Min Panel Hole Dia SESO DESO SESO DESO


1/4 SS-QTM4-S1-400 SS-QTM4-D1-400 QTM4 0.9 0.8 3.05 (77.5) 15/16 0.15 (3.8) 29/64 (11.5)

3/8 SS-QTM4-S1-600 SS-QTM4-D1-600 QTM4 1.7 1.6 3.05 (77.5) 15/16 0.15 (3.8) 37/34 (14.7)

1/2 SS-QTM8-S1-810 SS-QTM8-D1-810 QTM8 4.2 3.1 3.54 (89.9) 1 5/16 0.19 (4.8) 49/64 (19.4)


6 SS-QTM4-S1-6M0 SS-QTM4-D1-6M0 QTM4 0.9 0.8 77.5 (3.05) 24 3.8 (0.15) 11.5 (29/64)




Bulkhead Stems


SWAGELOK QUICK CONNECTS- MS-01-138 C-PH-654C DIM

A

F flat

D dia

Bulkhead Bodies



Dimensions

A D F Max Panel Thickness

Min Panel Hole Dia


1/4 SS-QTM2A-B1-400➀➁

SS-QTM4A-B1-400 QTM2QTM4

3.16 (80.3) 4.42 (112)

1.12 (28.4) 1.68 (42.7)

9/16 7/8

0.65 (16.5) 0.15 (3.8)

1 13/64 (30.6) 29/64 (11.5)

3/8 SS-QTM4A-B1-600 QTM4 4.51 (115) 1.68 (42.7) 7/8 0.15 (3.8) 37/64 (14.7)

1/2 SS-QTM8A-B1-810 QTM8 4.78 (121) 2.00 (50.8) 1 1/8 0.19 (4.8) 49/64 (19.4)


6 SS-QTM2A-B1-6M0➀➁ SS-QTM4A-B1-6M0

QTM2QTM4

80.3 (3.16) 112 (4.42)

28.4 (1.12) 42.7 (1.68)

15 24

16.5 (0.65) 3.8 (0.15)

30.6 (1 13/64) 11.5 (29/64)

10 SS-QTM4A-B1-10M0 QTM4 115 (4.52) 42.7 (1.68) 24 3.8 (0.15) 16.7 (21/32)

12 SS-QTM8A-B1-12M0 QTM8 121 (4.77) 50.8 (2.00) 30 4.8 (0.19) 19.4 (49/64)

Dimensions shown with Swagelok tube fitting nuts finger-tight.➀ To order alloy 400 with PTFE seals, replace SS in the ordering number with M. Example: M-QTM2A-B1-400➁ QTM2 bodies have an integral bulkhead, as shown at left.

Pipe Size




Min Panel Hole Dia

1/4 SS-QTM2A-B1-4PM➀ QTM2 3.02 (76.7) 1.12 (28.4) 9/16 0.65 (16.5) 1 13/64 (30.6)

Male NPT

➀ To order alloy 400 with PTFE seals, replace SS in the ordering number with M. Example: M-QTM2A-B1-4PM

Pipe Size




Min Panel Hole Dia

1/8 SS-QTM2A-B1-2PF QTM2 2.60 (66.0) 1.12 (28.4) 9/16 0.65 (16.5) 1 13/64 (30.6)

1/4 SS-QTM2A-B1-4PF➀ QTM2 2.96 (75.2) 1.12 (28.4) 3/4 0.65 (16.5) 1 13/64 (30.6)

➀ To order alloy 400 with PTFE seals, replace SS in the ordering number with M. Example: M-QTM2A-B1-4PF

Female NPT

QTM2 Integral Bulkhead

Safe Product SelectionWhen selecting a product, the total system design must be considered to ensure safe, trouble-free performance. Function, material compatibility, adequate ratings, proper installation, operation, and maintenance are the responsibilities of the system designer and user.

Caution: Do not mix or interchange parts with those of other manufacturers.

Warranty InformationSwagelok products are backed by The Swagelok Limited Lifetime Warranty. For a copy, visit swagelok.com or contact your authorized Swagelok representative.

Swagelok—TM Swagelok CompanyDyneon, TFM—TM DyneonElgiloy—TM Elgiloy Specialty MetalsXylan—TM Whitford© 2007 Swagelok CompanyPrinted in U.S.A., MIJune 2007, R8MS-01-138

Body and Stem ProtectorsBody and stem protectors are available. Contact your authorized Swagelok representative.

Bodies with Release Button QTM series bodies are available with an optional release button to prevent accidental uncoupling.

For more information, contact your authorized Swagelok representative.

Options, QTM Series

Keyed QTM SeriesSwagelok keyed quick-connects provide a positive mechanical lockout system to prevent accidental intermixing of different lines in multifluid or multipressure systems.

Features

■ Keyed quick-connects will not interchange with any other Swagelok keyed quick-connects

■ If an attempt is made to couple unlike keys, the valve system will not open.

■ Stems and bodies are color coded and numbered for easy identification.

QTM Series Key Numbers

QTM2 series quick-connects are available in keys K1 through K8. QTM4 and QTM8 series quick-connects are available in keys K1 through K4 only (black, orange, green, or yellow).

Keyed QTM series sleeve dimensions are the same as the standard QTM sleeve dimensions given in the Ordering Information and Dimensions tables.

Keyed sleeve

Key Color

Key Number and Designator

Black K1

Orange K2

Green K3

Yellow K4

Blue K5

White K6

Purple K7

Brown K8

quick-connects, qc, qf, qm, and qtm series, (ms-01-138,...

Documents