quick change applicatorcrimping applicator 33

4
www.schaefer.biz © Schaefer Werkzeug- und Sondermaschinenbau GmbH - Subject to errors and alterations - Version: 20120829 Quick Change Applicator Crimping Applicator 33.100 crimp height adjustment for longitudinally belted terminals pneumatical rear feed Pneumatical rear feed Reproducible crimp height adjustment Cross sections up to 25 mm² Robust design for different applications Simple operation Made for bench top and automated machines

Upload: others

Post on 20-Jun-2022

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Quick Change ApplicatorCrimping Applicator 33

www.schaefer.biz© Schaefer Werkzeug- und Sondermaschinenbau GmbH - Subject to errors and alterations - Version: 20120829

Quick Change Applicator

Crimping Applicator 33.100

crimp height adjustmentfor longitudinally belted terminalspneumatical rear feed

• Pneumatical rear feed

• Reproducible crimp height adjustment

• Cross sections up to 25 mm²

• Robust design for different applications

• Simple operation

• Made for bench top and automated machines

Page 2: Quick Change ApplicatorCrimping Applicator 33

www.schaefer.biz© Schaefer Werkzeug- und Sondermaschinenbau GmbH - Subject to errors and alterations - Version: 20120829

Description

Schaefer crimping applicators are used in the series production of thecable processing industry.

The crimping applicator 33.100 with quick change system is made forcrimping longitudinally belted terminals with wider distances betweeneach other. The robust design allows to process wires with crosssections up to 25 mm².

This applicator is designed with an indexed rotary head forreproducible, independent crimp height adjustment of both the wireand insulation. With the optional mechanical counter, it is easy tomonitor the production run and control the wear parts.

Pictures are showing applicator 31.100

The applicator 33.100 can be used in Schaefer crimp machines EPS6000, EPS 10000 and EPS 15000 and if designed accordingly also withSchaefer stripping modules.

Crimping applicators to connect wires and terminals in multipleapplications made for bench top crimp machines and also asequipment for semi or fully automated systems.

• Wire Crimper• Insulation Crimper• Crimp Anvil• Counter

OptionsRange of Application

Examples of use

Product Combination Possibilities

Quick Change Applicator

Crimping Applicator 33.100

Page 3: Quick Change ApplicatorCrimping Applicator 33

www.schaefer.biz© Schaefer Werkzeug- und Sondermaschinenbau GmbH - Subject to errors and alterations - Version: 20120829

Technical Data

SuppliesCompressed Air 6 bar, dried and oilfree

Processable WireCross Sections up to 25 mm²

Processable TerminalsMaterial Thickness up to 1,8 mmTerminal Pitch 28 - 56 mmTerminal Bar 1,0 - 6,5 mmTerminal Feeding rear feed

ActuationFeeding pneumatical

Stroke 40 mm

Width of the Crimping Punch 38 mm

Wire Crimp Height AdjustmentIncrements 0,02 mmMaximum 2 mm

Insulation Crimp Height AdjustmentIncrements 0,02 mmMaximum 2 mm

Temperature RangeOperation 15 °C - 40 °CStorage 0 °C - 60 °C (rF < 80%)

[1] approximately in basic configuration

Crimping Applicator 33.100

Page 4: Quick Change ApplicatorCrimping Applicator 33

www.schaefer.biz© Schaefer Werkzeug- und Sondermaschinenbau GmbH - Subject to errors and alterations - Version: 20120829

Vario Technologies sarl43, Rue Louis Robert91100 Corbeil EssonnesPhone:Fax:Email:URL:

+33 970 44 55 26+33 173 76 64 62peter.sandkamp@vario-technologies.comwww.vario-technologies.com

Sales and Service for France

Headquarters

Schäfer Werkzeug- und Sondermaschinenbau GmbHDr.-Alfred-Weckesser-Str. 676669 Bad SchönbornPhone:Fax:Email:URL:

+49 7253 9421-0+49 7253 [email protected]