1. On the Web LMT, run the DSP CALLRES command. Then, press Enter or click Assist.

2. Set User Query Type to BYTMISI(BY TMSI), BYIMSI(By IMSI), BYMSISDN(By

MSISDN), or BYIMEI(By IMEI). The corresponding MS identifier (ID) is displayed.

3. Set the ID based on the specified User Query Type. Then, click Exec.

Operation Results

An example of the query results is as follows:

%%DSP CALLRES: USERIDTYPE=BYMSISDN, MSISDN="13988880042";%%

RETCODE = 0 Execution succeeded.

General Info.

-------------

TMSI Info. =

IMSI Info. = 460190188880104

MSISDN Info. = 13988880042

IMEI Info. =

Procedure (BSC6900V900R011C00)Procedure (BSC6900V900R011C00)Procedure (BSC6900V900R011C00)Procedure (BSC6900V900R011C00)

Page 1 of 3Procedure (BSC6900V900R011C00) - Maintenance Functions-Voice

Call Ccb. = 23

(Number of results = 1)

MS Info.

--------

Service Type. = Speech

Cell No. = 0

Trx No. = 1

Ch No. = 5

Cipher Mode. =

Start date. = 2009-07-29 19:37:10

(Number of results = 1)

Speech Info.

------------

RxLevUL. = 32

RxLevDL. = 33

RxQualUL. = 0

RxQualDL. = 0

BsPower. = 5

MsPower. = 5

MeanBep. =

TA. = 0

Speech Ver. = EFR

(Number of results = 1)

Abis Chno Ts Info

-----------------

SubRack No. = 0

Slot No. = 18

Port No. = 1

Ts No. = 6

SubTs No. = 0

Trx No. = 1

Chno No. = 5

SubChno No. = 0

(Number of results = 1)

A Chno Ts Info

--------------

SubRack No. = 0

Slot No. = 26

Port No. = 0

Ts No. = 120

Cic No. = 15

(Number of results = 1)

Page 2 of 3Procedure (BSC6900V900R011C00) - Maintenance Functions-Voice

TC Resource Info

----------------

SubRack No. = 0

Slot No. = 9

Dsp No. = 1

Tc Channel No. = 6

Channel Service Type = EFR

Channel Service Rate = 12.2K

Sence Mode = TRAU-TC

Loopback Type = No Loop

Loopback Direction = No Loop

Tfo State = TFO not start

A IP Csd Service redundance Level =

Abis IP Csd Service redundance Level =

A Interface sid =

Abis Interface Sid =

(Number of results = 1)

Subrack Link Ts Info

--------------------

Corresponding results not found

Abis IP Info

------------

Corresponding results not found

Abis Hdlc Info

--------------

Corresponding results not found

--- END

The query result shows the call resource usage of the MS, including information about the BM

subrack, TC link, A interface, and Ater interface. The query result also includes information such

as DSP number, channel number, service type, circuit identification codes (CICs) on the A

interface, as well as timeslots occupied by the GEIUA, GEIUB, and GEIUT. The information is

useful for further queries and operation and maintenance (O&M). If any exceptions occur during

the query, ensure that the prerequisites are met before running the query again.

Page 3 of 3Procedure (BSC6900V900R011C00) - Maintenance Functions-Voice