quartino sc
DESCRIPTION
Posizionatori automatici a tornio Posizionatori automatici a tornio SC SERIES Lathe Automatic Positioners SC SERIES Lathe Automatic Positioners A u t o m a t i s m i e p o s i z i o n a t o r i a u t o m a t i c i p e r s a l d a t u r a A u t o m a t i s m i e p o s i z i o n a t o r i a u t o m a t i c i p e r s a l d a t u r aTRANSCRIPT
SERIE SCPosizionatori automatici a tornio
SERIE SCPosizionatori automatici a tornio
A u t o m a t i s m i e p o s i z i o n a t o r i a u t o m a t i c i p e r s a l d a t u r a
SC SERIES Lathe Automatic PositionersSC SERIES Lathe Automatic Positioners
A u t o m a t i s m i e p o s i z i o n a t o r i a u t o m a t i c i p e r s a l d a t u r a
SERIE SC
Posizionatori automatici a tornioLathe Automatic Positioners
Posizionatori per saldatura contemporanea ed auto-matica di pezzi circolari. Rotazione con motore elettricoa corrente continua. Contropunta azionata da coman-do bimanuale. Schermo scorrevole finestrato convetro inattinico in dotazione. Supporto/i a V regolabi-le/i e scorrevole/i (opzionali). La lunghezza utile tracontropunta e tavola è personalizzabile su richiesta.
Positioner for the simultaneous automatic circular wel-ding of circular pieces, maximum load 200 kg. Rotationactivated by a direct current electrical motor. Bimanualcontrol driven tail-stock. Equipped with a flowing rearprotective screen with display in inactinic glass.Optional adjustable sliding V-support. The workinglength between the tail-stock and the table can becustomized on request.
Modello SCA 200
Modello SCL 500
Modello SCX 1000
Modello SCL 500
Posizionatore a tornio di grandi presta-zioni, portata nominale 500Kg, tavolarotante Ø 600mm, stazioni porta torciascorrevoli su guida lineare e carrelli aricircolazione di sfere, foro passante sutavola Ø 50mm, opzionale Ø 100mm eØ 200mm, disponibile con lunghezzeutili da 2mt a 5mt, dotato di schermoanteriore protettivo scorrevole con dis-play in vetro inattinico.
High-performance wheel positionerwith a nominal load capacity of 500Kg,rotating table Ø 600mm. Torch holderscan be run on a linear path and ball-bearing trolleys. 50mm orifice to fitonto the table, with optional thicknessof 100mm or 200mm, available in usefullengths ranging from 2m to 5m, equip-ped with a flowing rear protectivescreen with display in inactinic glass.
SCA 200
SCL 500
SCX 1000
Prodotto
Modelø max rotabile
(mm)
Modelli SC
400
500
250
Portata Max. kgMax. Load kg
200
500
1.000
Lunghezza Utile mt.Util Lenght mt.
2 / 3 / 4
2 / 3 / 4 / 5
2 / 3 / 4 / 5
A
mm
1.360
2.100
1.900
B
mm
600
800
950
Configurazioni
e caratteristiche sono
personalizzabili su
specifiche esigenze del
cliente. Quote e disegni
sono indicativi.
All positioners can be customized
according to specific requirements.
Measures and drawings are just
for reference.
Modello SCA 200
Posizionatore a tornio dal buon rappor-to prestazioni/prezzo, disponibile conlunghezze utili da 2mt a 4mt, portatanominale 200Kg, tavola rotante Ø500mm, foro passante su tavola Ø50mm, opzionale Ø 100mm, dotato dischermo anteriore protettivo scorrevo-le con display in vetro inattinico.
Wheel positioner with excellent perfor-mance/price ratio, available with usefullengths ranging from 2m to 4m.Nominal load capacity of 200kg, rotatingtable Ø 500mm, with a 50mm orifice tofit onto the table, with an optionalthickness of 100mm. Equipped with aflowing rear protective screen with dis-play in inactinic glass.
Modello SCX 1000
Posizionatore a tornio di grandi presta-zioni, portata nominale 1000Kg, predi-sposto per funzionamento con tavola afolle in fuori ciclo, indispensabile per leoperazioni di equilibratura e allinea-mento dei pezzi, tutti gli spostamenti ditorce e contropunta avvengono suguide lineari rettificate e carrelli a ricir-colazione di sfere. Asse porta torcemotorizzabile per eseguire saldaturelineari o per eseguire operazioni diriporto su cilindri, con ciclo di lavoro suPLC opzionale. Dotato di schermo ante-riore protettivo scorrevole con displayin vetro inattinico.
High-performance wheel positionerwith a nominal load capacity of1000Kg, designed to work with a tableout of gear outside the cycle, indispen-sable for balancing and alignment ofthe pieces. All torch movements andopposing movements take place onrectified linear paths and ball-bearingtrolleys. Axle for holding the torchwhich can be motorized to carry outlinear welding or to carry out mainte-nance (riporto) on cylinders, with anoptional PLC work cycle. Equipped witha flowing rear protective screen withdisplay in inactinic glass.
Caratteristiche tecniche SERIE SCTechnical features SC SERIES
SCA 200
SCL 500
SCX 1000MODELLO MODELS
LEGENDA: √ = di serie; – = non disponibile; • = opzionale. LEGEND: √ = standard; – = not available; • = optional.
A u t o m a t i s m i e p o s i z i o n a t o r i a u t o m a t i c i p e r s a l d a t u r a
Elettromeccanica MB s.n.c.
Via Carlo Porta, 3 - 20090 Trezzano S/N (MI) - Tel. (+39) 02.4453178 - Fax (+39) 02.36551036www.e le t t romeccan icamb. i t - e -ma i l : i n fo@ele t t romeccan icamb. i t
I dati riportati non sono impegnativi. Elettromeccanica MB si riserva di apportare le modifiche che riterrà opportune senza alcun preavviso.
Portata nominale (kg) 200 500 1000
• • •
√ √ √
√ √ √
√ √ √
√ √ √
√ √ √
√ √ √
1/9 – –
0,4/5 0,3/5 0,25/5
• • •
• • •
• • •
• • •
• • •
• • •
• • •
• • •
600 600 1000
• • –
– • –
50 50 –
500 600 250
√ √ √
230 230 230Tensione di alimentazione (V)
Controllo elettronico
Diametro tavola (mm)
Foro passante (Ø mm.)
Foro passante da Ø100 mm.
Foro passante da Ø200 mm.
Corrente massima di saldatura
Spazzole in grafite
Velocità giri/min con pignone Ø22
Velocità giri/min con pignone Ø40
Controllo per due saldatrici
Funzione provafilo
Ciclo di lavoro MIG e TIG
Formazione cratere regolabile elettronicamente
Pedale di START ciclo
Insufflazione gas da contropunta
Pedale per controllo velocità tavola
Ingresso per sensore di arco acceso
Display digitale visualizzazione velocità
Funzione multigiro, da 1 a 6 giri
Dinamo tachimetrica
Ciclo di lavoro personalizzato con PLC
Sormonto regolabile elettronicamente
Predisposizione per secondo braccio pneumatico
Nominal load (kg)
Supply voltage (V)
Electronic control
Table diameter (mm)
Clearing hole (Ø mm.)
Clearing hole Ø100mm.
Clearing hole Ø200mm.
Max. welding current (A)
Carbon brushes
Speed (rpm) with Ø22mm gear
Speed (rpm) with Ø40mm gear
Control for two welding machines
Wire test function
MIG and TIG working cycle
Electronic adjustable crater filling
Start cycle from pedal
Tailstock gas injection
Speed control from pedal
Ready for Arc sensor
Digital display for speed
Multilaver function 1 to 6 rotations
Tacho dynamo
Customized working cycle with PLC
Electronic adjustable overlap
Ready for 2nd
pneumatic arm
Rivenditore Autorizzato
Tutti i posizionatori sono personalizzabili su specifiche esigenze. A richiesta delcliente si effettuano studi di automatismi speciali. Elettromeccanica MB producele seguenti linee di prodotto di cui si può richiedere documentazione specifica:
All positioners can be customised according to specific requirements. At therequest of the customer, studies of special automations can be carried out.Electromeccanica MB produces the following product lines for which you canrequest specific documentation:
• TAVOLE ROTANTI DI GRANDE PORTATA• POSIZIONATORI A TAVOLA ROTANTE FINO A 300 KG.• POSIZIONATORI A RULLI• LINEE DI CORSA MOTORIZZATE PER SALDATURE LINEARI DA 0,5 A 12 MT.• BANCHI DI BLOCCAGGIO PER SALDATURE LONGITUDINALI• MANIPOLATORI A BANDIERA
Stu
dio
Bru
gn
etti
PANNELLO DI CONTROLLO
Per la descrizione delle funzionalità
gestite mediante il pannello di
controllo e per la spiegazione del
ciclo di lavorazione rimandiamo al
depliant SERIE TG-TR.
CONTROL PANELCheck our TG-TR series catalogue
for a detailed description of the
standard control panel functions
and working cycle.
FORO PASSANTE Ø 200 mm
Su richiesta è possibile fornire laserie SCL/SCX con foro passanteØ 200 mm.
CLEARING HOLE Ø 200 mm
As an option we can supply SCLand SCX machines with a clearinghole Ø 200 mm.