qualifications of full-time and part-time faculty name of ... 3.7... · nccer core curricula...
TRANSCRIPT
Faculty Roster Form
Qualifications of Full-Time and Part-Time Faculty
Name of Institution: Baton Rouge Community College
Name of Primary Department, Academic Program, or Discipline: Air Conditioning & Refrigeration
Academic Term(s) Included: Fall 2014, Spring 2015 Date Form Completed: January 9, 2015
1 2 3 4
NAME (F, P) COURSES TAUGHT
Including Term, Course Number & Title
Credit Hours (D, UN, UT, G)
ACADEMIC DEGREES &
COURSEWORK
Relevant to Courses Taught,
Including Institution & Major
List specific graduate coursework,
if needed
OTHER QUALIFICATIONS &
COMMENTS
Related to Courses Taught
Harrison Gary F Fall 2014
HACR Semester Block 1, 7.5 (UN)
HACR Semester Block 2, 7.5 (UN)
Spring 2015 HACR Semester Block 1, 7.5 (UN)
HACR Semester Block 2, 7.5 (UN)
B.S. Business Management
Southern University
Certifications:
NCCER Core Curricula Instructor
NCCER HVAC Instructor
NCCER Electrical Instructor
HVAC Excellence
Certified Master HVACR Educator
State of Louisiana Contractors Licenses
Bldg. Construction, Electrical,
Mechanical
Residential Building Contractor
Department of Education
Teaching Certificate A/C Refrigeration
Work Experience:
AG & H Air Conditioning &
Refrigeration – Owner/Operator (30 yrs.)
Block scheduling is utilized in some
diploma areas to assist in class
scheduling. Block 1 refers to the morning
session of 3 hours of instruction and
block 2 refers to the afternoon session of
3 hours of instruction. Due to the many
varying lengths of air conditioning
courses, dividing the day instruction into
3 hour segments better accommodates
student needs in this program area.
Utilizing this block format, instructors are
provided a path to offer multiple
lecture/lab courses during the same time
frame.
Meek Jerry F Fall 2014
HACR Semester Block 1, 7.5 (UN)
HACR Semester Block 2, 7.5 (UN)
Spring 2015 HACR Semester Block 1, 7.5 (UN)
HACR Semester Block 2, 7.5 (UN)
Certifications:
State of Louisiana Contractor’s License
Mechanical Work
AC&R Safety Coalition R-410A Safe
Handling
HVAC Excellence
Certified Air Conditioning Educator
Certified Electrical Educator
Certified Electric Heat Educator
Certified Heat Pump Educator
NCCER Core Curricula Instructor
NCCER HVAC Instructor
Work Experience:
American Komfort Kare –
HVAC/Handyman/Electrical – Owner
(1999 - Present)
Sears – HVAC/Refrigeration/Home
Improvement Sales (3 years)
Small Business Administrations –
Construction Analyst/Supervisory Loss
Verifier (2 years)
Transportation Distribution Service –
OTR Truck Driver (2 years)
Dynastar Development –
Handyman/Electrical (1 year)
Gellenbeck Installations Inc. –
Supervisor/Leadsman (2 years)
Bartlett Co-Op Association –
Millwright/Elec/Grain Elevator
Oper/Maint./OTR Truck Driver (1 yr.)
Taylor Crane & Rigging –
Millwright/Electrical/Equip.
Operator/OTR Truck Driver (4 yrs.)
Faculty Roster Form
Qualifications of Full-Time and Part-Time Faculty
Name of Institution: Baton Rouge Community College
Name of Primary Department, Academic Program, or Discipline: Barber-Styling
Academic Term(s) Included: Fall 2014, Spring 2015 Date Form Completed: January 9, 2015
1 2 3 4
NAME (F, P) COURSES TAUGHT
Including Term, Course Number & Title, Credit Hours
(D, UN, UT, G)
ACADEMIC DEGREES &
COURSEWORK
Relevant to Courses Taught,
Including Institution & Major
List specific graduate coursework,
if needed
OTHER QUALIFICATIONS &
COMMENTS
Related to Courses Taught
Poydras Arnold P Fall 2014 BARB 1110, History of Barbering, 2 (UN)
BARB 1120, Sanitation Bacteriology Safety Theory, 2 (UN)
SPPR 2995, Special Projects III, 3 (UN)
Barber Board Certifications:
Barber License
Instructor License
Work Experience:
Gilbert’s Hair Care –
Owner/Operator/Barber (February
2001 – Present)
Saizon-Smith Kyle P Fall 2014 BARB 1110, History of Barbering, 2 (UN)
BARB 1120, Sanitation Bacteriology Safety Theory, 2 (UN)
BARB 1140, Facial Massage and Treatments, 2 (UN)
BARB 1231, Barber-Styling Lab II, 2 (UN)
Spring 2015 BARB 1150, Prop/Disorders/Treatments Theory 2 (UN)
BARB 1160, Basic Haircutting/Styling, 2 (UN)
BARB 1350, Chemistry, 2 (UN)
BARB 1410, Electricity and Safety, 1 (UN)
BARB 1430, Men’s Hairpieces Theory, 1 (UN)
Diploma Barber-Styling Capital Area Technical College
Barber Board Certifications:
Barber License
Instructor License
Work Experience:
Four-Way Barber Shop – Barber
(2009 – Present)
Gilbert’s Hair Care – Barber (11 yrs.)
Washington Ella F Fall 2014
BARB 1131, Sanitation Bacteriology Safety Lab, 1 (UN)
BARB 1211, Barber-Styling Lab I, 4 (UN)
BARB 1330, Hair Coloring Theory and Practice, 2 (UN)
BARB 1441, Barber-Styling Lab III, 5 (UN)
Spring 2015 BARB 1310, Permanent/Relaxing Theory & Prac., 3 (UN)
AAT Occupational Education
Sowela Technical Community
College
Barber Board Certifications:
Barber License
Instructor License
Work Experience:
Four-Way Barber Shop – Barber
(1975 – Present)
Webb’s Barber Shop – Barber (8 yrs.)
BARB 1321, Permanent Waving/Chemical Lab, 2 (UN)
BARB 1341, Hair Coloring Lab, 2 (UN)
BARB 2131, LA State Board Review Lab, 4 (UN)
Faculty Roster Form
Qualifications of Full-Time and Part-Time Faculty
Name of Institution: Baton Rouge Community College
Name of Primary Department, Academic Program, or Discipline: Care and Development of Young Children
Academic Term(s) Included: Fall 2014, Spring 2015 Date Form Completed: January 9, 2015
1 2 3 4
NAME (F, P) COURSES TAUGHT
Including Term, Course Number & Title, Credit
Hours (D, UN, UT, G)
ACADEMIC DEGREES &
COURSEWORK
Relevant to Courses Taught,
Including Institution & Major
List specific graduate coursework,
if needed
OTHER QUALIFICATIONS &
COMMENTS
Related to Courses Taught
Buckley Veronica P
Spring 2015 CDYC 1410, Children with Special Needs, 2 (UN)
M.Ed. Early Childhood Education Grand Canyon University
B.S. Management with emphasis in
Early Childhood Education
University of Pheonix
Certifications:
Child Development Associate (CDA)
Certified Class Observer
Work Experience:
East Baton Rouge Parish Head
Start/Early Head Start – Content Area
Specialist (June 2009 – Present)
East Baton Rouge Parish Head
Start/Early Head Start – Center
Supervisor (3.75 years)
East Baton Rouge Parish Head
Start/Early Head Start – Teacher
(13.5 years)
Gazave Amber P
Fall 2014 CDYC 1110, Intro Care & Dev of Young Child, 3 (UN)
CDYC 1130, Child Guidance and Behaviors, 3 (UN)
CDYC 1220, Infant/Todd Care & Curriculum, 3 (UN)
Spring 2015 CDYC 1110, Intro Care & Dev of Young Child, 3 (UN)
CDYC 1220, Infant/Todd Care & Curriculum, 3 (UN)
M.S. Human Ecology
(conc. In Early Childhood Educ.)
Louisiana State University
B.A. Elementary Education
McNeese State University
Work Experience:
Capital Area Technical College –
Admission Officer/Instructor (9 yrs.)
LSU Lab Preschool – Grad. Teacher
(1.5 years)
Grant Coteau/Sunset Head Start
Center – Asst. Site Supervisor/Child
Fly. Service Worker (3.5 years)
Sunset Head Start Ctr. – Site
Supervisor (7 months)
Sunset Head Start Center – Teacher
(4 years)
Marks Gwendolyn F Fall 2014 Plus 30 Early Childhood Education Certifications:
CDYC 1110, Intro Care & Dev of Young Child, 3 (UN)
CDYC 1151, Observation & Participation Lab, 3 (UN)
CDYC 1241, Infant/Todd Lab/wk Based Learn, 3 (UN)
CDYC 1341, Preschool Lab, 3 (UN)
CDYC 1410, Children With Special Needs, 2 (UN)
CDYC 1420, Org & Admin of CDYC, 3 (UN)
CDYC 2211, Practicum in CDYC, 5 (UN)
Spring 2015
CDYC 1110, Intro Care & Dev of Young Child, 3 (UN)
CDYC 1120, Health, Safety & Nutrition, 3 (UN)
CDYC 1151, Observation & Participation Lab, 3 (UN)
CDYC 1241, Infant/Todd Lab/wk Based Learn, 3 (UN)
CDYC 1320, Preschool Curriculum, 3 (UN)
CDYC 1341, Preschool Lab, 3 (UN)
CDYC 2211, Practicum in CDYC, 5 (UN)
Xavier University grad. coursework:
EDCI 2580 Pre-Sch/Prim Curr
EDCI 5060 Multi-Cultural Education
EDCI 5225 Assessment in Early
Childhood
EDAD 6050C Oper and Mgt of Child
Care Ctr
EDCI 5160 Curr Theory/Models
EDCI 5440 The Exceptional Child
EDCI 5220 Growth/Develop of
Child/Adoles
EDUC 677 Foundations of Early Lit
Total: 24 graduate sem. hours
M.Ed. Counselor Education Southern University
B.S. Home Economics (Child
Development)
Southern University
La. Comm. & Tech. College System
Teaching Certificate Early Childhood
Education
Work Experience:
EBR Parish Head Start
Educ/Transition Supervisor (2 yrs.)
EBR Head Start - Director (8 yrs.)
Basic Health Mgt. International Inc.
Field Consultant (1994 – Present)
Andrews and Associates Consultant
for Early Childhood Staff (7 years)
EBR Head Start Teacher (6 years)
North Baton Rouge Child Dev.
Center Teacher (3 years)
Miller Karen P Spring 2015 CDYC 1110, Intro Care & Dev of Young Child, 3 (UN)
M.Ed. Educational Leadership Southeastern Louisiana University
Graduate Coursework:
ECED 5560 Early Childhood/Primary
Learning
ECED 5570 Early Childhood/Primary
Curriculum
ECED 5580 Early Chld/Primary
Practicum
ECED 5520 Curr & Spaces for Infant
& Toddler
ECED 5530 Positive Relationships
Child
ECED 5010 Adv. Child Development
ECED 5550 Early Childhood/Primary
School
Certifications:
Louisiana Department of Education
Teaching Certificate
Work Experience:
East Baton Rouge Parish School
System – Elem. Education (5 yrs.)
Kingdom Early Learning Center –
Director (June 2009 – Present)
Living Faith Christian Center –
Executive Assistant (13.33 years)
Smith Vivian F Fall 2014 CDYC 1151, Observation & Participation Lab, 3 (UN)
CDYC 1210, Growth & Dev of Young Children, 3 (UN)
CDYC 1220, Infant/Todd Care & Curriculum, 3 (UN)
CDYC 1241, Infant/Todd Lab/wk Based Learn, 3 (UN)
CDYC 1332, Preschool Methods, 3 (UN)
M.Ed. Admin. & Supervision Southern University
B.S. Family & Consumer Sciences
Southern University
Work Experience:
Volunteers of America Partnership in
Childcare (1999 – Present)
LSU Child Care Center - Assistant
Director (2 years)
EBR Parish Head Start Content Area
CDYC 1341, Preschool Lab, 3 (UN)
CDYC 2211, Practicum in CDYC, 5 (UN)
Spring 2015 CDYC 1130, Child Guidance and Behaviors, 3 (UN)
CDYC 1151, Observation & Participation Lab, 3 (UN)
CDYC 1210, Growth & Dev of Young Children, 3 (UN)
CDYC 1241, Infant/Todd Lab/wk Based Learn, 3 (UN)
CDYC 1330, Literature/Language Methods, 3 (UN)
CDYC 1332, Preschool Methods, 3 (UN)
CDYC 1341, Preschool Lab, 3 (UN)
CDYC 2211, Practicum in CDYC, 5 (UN)
Spec./Education (2 years)
EBR Parish School System Teacher
Assistant (11 years)
Zenon Arlendra P
Fall 2014 CDYC 1320, Preschool Curriculum, 3 (UN)
CDYC 1330, Literature/Language Methods, 3 (UN)
B.S. Family & Consumer Sciences Southeastern Louisiana University
Faculty Roster Form
Qualifications of Full-Time and Part-Time Faculty
Name of Institution: Baton Rouge Community College
Name of Primary Department, Academic Program, or Discipline: Carpentry
Academic Term(s) Included: Fall 2014, Spring 2015 Date Form Completed: January 9, 2015
1 2 3 4
NAME (F, P) COURSES TAUGHT
Including Term, Course Number & Title, Credit
Hours (D, UN, UT, G)
ACADEMIC DEGREES &
COURSEWORK
Relevant to Courses Taught,
Including Institution & Major
List specific graduate coursework,
if needed
OTHER QUALIFICATIONS &
COMMENTS
Related to Courses Taught
Campbell Douglas F Fall 2014
CARP Semester Block 1, 7.5 (UN)
CARP Semester Block 2, 7.5 (UN)
Spring 2015 CARP Semester Block 1, 7.5 (UN)
CARP Semester Block 2, 7.5 (UN)
Certifications:
NCCER Core Curricula Instructor
NCCER Carpentry Instructor
National Occupation Competency
Testing Institute Carpentry Cert.
Work Experience:
Campbell Construction - General
Contractor (3 years)
Home Care Inc. - Franchise
Contractor Owner (3 years)
Lochburn Construction (CA) -
General Contractor (3 years)
George Bean Construction (CA) -
Journeyman Carpenter (10 years)
Phil’s Painting (CA) – Painter
Apprentice (2 years)
Dalton Framing (CA) - Carpenter
Apprentice (2 years)
Block scheduling is utilized in some
diploma areas to assist in class
scheduling. Block 1 refers to the
morning session of 3 hours of
instruction and block 2 refers to the
afternoon session of 3 hours of
instruction. Due to the many varying
lengths of carpentry courses,
dividing the day instruction into 3
hour segments better accommodates
student needs in this program area.
Utilizing this block format,
instructors are provided a path to
offer multiple lecture/lab courses
during the same time frame.
May Billy F Fall 2014
CARP Semester Block 1, 7.5 (UN)
CARP Semester Block 2, 7.5 (UN)
Spring 2015
CARP Semester Block 1, 7.5 (UN)
CARP Semester Block 2, 7.5 (UN)
Certifications:
NCCER Core Curricula Instructor
NCCER Carpentry Instructor
National Occupation Competency
Testing Institute Carpentry Cert.
Work Experience:
Prime Properties XL - Maintenance
Mechanic (4 years)
Baton Rouge Wood Products -
Consultant (1 year)
Baton Rouge Wood Products –
Owner/President (8 years)
Baton Rouge Wood Products – Shop
Foreman (6 years)
Baton Rouge Wood Products –
Cabinet Maker (9 years)
Master Maintenance – AC Mechanic
(2 years)
East Baton Rouge School Board –
Appliance Mechanic (8 years)
McCray Jason P Fall 2014
CARP 1110, Introduction and Safety, 1 (UN)
Spring 2015
CARP 1120, Hand Tools, 2 (UN)
M. Ed. Vocational Agriculture
Education Southern University
B.S. Agriculture Education Alcorn State University
Certifications:
Louisiana Department of Education
Teaching Certificate
NCCER Craft Instructor (Carpentry,
Core Curricula, Welding)
Work Experience:
Texas Eastern Gas Pipeline (4 years)
Verbick James F Fall 2014
CARP Semester Block 1, 7.5 (UN)
CARP Semester Block 2, 7.5 (UN)
Spring 2015 CARP Semester Block 1, 7.5 (UN)
CARP Semester Block 2, 7.5 (UN)
AAS Occupational Education
Capital Area Technical College
Certifications:
NCCER Core Curricular Instructor
NCCER Carpentry Instructor
National Occupation Competency
Testing Institute Carpentry Cert.
Work Experience:
Baton Rouge Wood Products –
Carpenter/Cabinet Maker (4 years)
Sears - Service Industry (32 years)
Faculty Roster Form
Qualifications of Full-Time and Part-Time Faculty
Name of Institution: Baton Rouge Community College
Name of Primary Department, Academic Program, or Discipline: Collision Repair Technology
Academic Term(s) Included: Fall 2014, Spring 2015 Date Form Completed: January 9, 2015
1 2 3 4
NAME (F, P) COURSES TAUGHT
Including Term, Course Number & Title,
Credit Hours (D, UN, UT, G)
ACADEMIC DEGREES &
COURSEWORK
Relevant to Courses Taught,
Including Institution & Major
List specific graduate coursework,
if needed
OTHER QUALIFICATIONS &
COMMENTS
Related to Courses Taught
Bajoie Lawrence F Fall 2014 CLRP Semester Block 1, 7.5 (UN)
CLRP Semester Block 2, 7.5 (UN)
Spring 2015
CLRP Semester Block 1, 7.5 (UN)
CLRP Semester Block 2, 7.5 (UN)
ASE Certifications:
Painting & Refinishing
Non-Structural Analysis & Repair
Structural Analysis & Repair
Mechanical & Elect. Components
Work Experience:
A-1 Automotive Export – Body Shop
Manager/Owner (5 years)
Red’s Auto Paint & body Shop –
Manager/Owner (4½ years)
Tiger Town Paint & Body Shop –
Manager/Owner (1 year)
Block scheduling is utilized in some
diploma areas to assist in class
scheduling. Block 1 refers to the
morning session of 3 hours of instruction
and block 2 refers to the afternoon
session of 3 hours of instruction. Due to
the many varying lengths of collision
repair courses, dividing the day
instruction into 3 hour segments better
accommodates student needs in this
program area. Utilizing this block
format, instructors are provided a path to
offer multiple lecture/lab courses during
the same time frame.
Faculty Roster Form
Qualifications of Full-Time and Part-Time Faculty
Name of Institution: Baton Rouge Community College
Name of Primary Department, Academic Program, or Discipline: Cosmetology
Academic Term(s) Included: Fall 2014, Spring 2015 Date Form Completed: January 9, 2015
1 2 3 4
NAME (F, P) COURSES TAUGHT
Including Term, Course Number & Title, Credit
Hours (D, UN, UT, G)
ACADEMIC DEGREES &
COURSEWORK
Relevant to Courses Taught,
Including Institution & Major
List specific graduate coursework,
if needed
OTHER QUALIFICATIONS &
COMMENTS
Related to Courses Taught
Tanios LaTonya F Fall 2014 COSM 1321, Permanent Waving, 5 (UN)
COSM 2520, Artistry of Artificial Hair, 2 (UN)
COSM 2530, Electricity & Light Therapy, 2 (UN)
COSM 2540, Salon Management, 4 (UN)
JOBS 2450, Job Seeking Skills, 2 (UN)
Spring 2015
COSM 1110, Intro, Decontam. & Infec. Control, 4 (UN)
COSM 1130, Shampooing, Rinsing & Cond., 3 (UN)
COSM 1230, Wet Hair Styling, 4 (UN)
COSM 1430, Hair Coloring, 5 (UN
COSM 2996, Special Projects IV, 3 (UN)
Diploma – Instructor Training Lockworks Academie of Hairdressing
Certifications:
La. State Board of Cosmetology
Cosmetology Instructor’s License
La. Comm. & Technical College
System
Teaching Certificate Cosmetology
Work Experience:
Lockworks – Cosmetology Instructor
and Evening Supervisor (9 years)
Faculty Roster Form
Qualifications of Full-Time and Part-Time Faculty
Name of Institution: Baton Rouge Community College
Name of Primary Department, Academic Program, or Discipline: Culinary Arts & Occupations
Academic Term(s) Included: Fall 2014, Spring 2015 Date Form Completed: January 9, 2015
1 2 3 4
NAME (F, P) COURSES TAUGHT
Including Term, Course Number & Title, Credit
Hours (D, UN, UT, G)
ACADEMIC DEGREES &
COURSEWORK
Relevant to Courses Taught,
Including Institution & Major
List specific graduate coursework,
if needed
OTHER QUALIFICATIONS &
COMMENTS
Related to Courses Taught
Amedee Angela P Fall 2014
CULN 1130, Sanitation and Safety, 3 (UN)
CULN 1170, Essentials of Dining Room Svc, 2 (UN)
B.S. General Home Economics
Education Nicholls State University
Certifications:
Louisiana Department of Education
Teaching Certificate
National Board Certified Teacher
Certified Secondary Foodservice
Educator
Douglas Michael F Fall 2014
CULN Semester Block 1, 7.5 (UN)
CULN Semester Block 2, 7.5 (UN)
Spring 2015 CULN Semester Block 1, 7.5 (UN)
CULN Semester Block 2, 7.5 (UN)
A.S. Culinary Arts
Nicholls State University
Certifications:
DHH Food Safety Certification
ServSafe Food Protection Manager
ManageFirst Nutrition
ManageFirst Hosp. & Rest. Mgt.
Work Experience:
Bull’s Corner – Chef (1 year)
Fremin’s – Chef (6 mos.)
Rotolo’s – Managing Chef (2 years)
White Oak Plantation – Chef (1 yr.)
Rotolo’s – Chef (1 year)
Block scheduling is utilized in some
diploma areas to assist in class
scheduling. Block 1 refers to the
morning session of 3 hours of
instruction and block 2 refers to the
afternoon session of 3 hours of
instruction. Due to the many varying
lengths of culinary courses, dividing
the day instruction into 3 hour
segments better accommodates
student needs in this program area.
Utilizing this block format, instructors
are provided a path to offer multiple
lecture/lab courses during the same
time frame.
Edwards Lorenzo P Fall 2014
CULN 1130, Sanitation and Safety, 3 (UN)
CULN 1170, Essentials of Dining Room Svc, 2 (UN)
A.S. Culinary Arts
Nicholls State University
Certifications:
Louisiana Department of Education
Teaching Certificate
ServSafe Certification
Certified ServSafe Instructor and
Registered ServSafe Examination
Proctor
Work Experience:
Hilon Worldwide – Cook (3 ½ years)
French Jean F Fall 2014 CULN 1170, Essentials of Dining Room Svc, 2 (UN)
CULN 1321, A'La Carte, 3 (UN)
CULN 2310, Intro to Baking and Pastry, 5 (UN)
Spring 2015 CULN 1170, Essentials of Dining Room Svc, 2 (UN)
CULN 1240, Culinary Production for Dining, 7 (UN)
CULN 2310, Intro to Baking and Pastry, 5 (UN)
CULN 2410, Regional Cuisine, 2 (UN)
CULN 2420, International Cuisine, 2 (UN)
AAS Occupational Education Capital Area Technical College
Certifications:
ServSafe Food Protection Manager
DHH Food Safety Certification
Certified Club Manager
Certified Executive Chef
Work Experience:
Dorele Food Company – Food
Service Rep. (2 years)
Giovanni’s Enterprises – Manager of
5 Restaurants (2 years)
Baton Rouge Country Club –
General Manager (5 years)
LaNormandie Restaurant –
Executive Chef/Owner (5 years)
Sherwood Forest Country Club –
Clubhouse Mgr/Executive Chef (2 yrs.)
Shanandoah Country Club –
Clubhouse Mgr/Executive Chef (4 yrs.)
Baton Rouge Country Club –
Assistant Manager (2 years)
Chalet Brandt Restaurant – Maitre
d’Hotel (2 years)
S/S Francliner “French Line” – Chef
de Rang and Maitre d’Hotel (12 yrs.)
Gill Celeste P Fall 2014
CULN 1130, Sanitation and Safety, 3 (UN)
CULN 1170, Essentials of Dining Room Svc, 2 (UN)
AS Food Science
The University of Hawaii/Leeward
Community College
Work Experience:
Cooking Up Louisiana Treasures –
Instructional TV Show (2 years)
The Around Town TV Show –
Resident Chef (5 years)
Southside Gardens Retirement
Comm. – Food Serv. Director (8 yrs.)
Breada Red Stick Farmers Market –
Chef Coordinator (8 years)
Taylors Old Post Office Café –
Owner Operator (6 years)
Lake Sherwood village – Food
Service Director (2 years)
The Retirement Center – Food
Service Director (2 years)
Sunrise Retirement – Food Service
Director (2 years)
US Army National Guard Honolulu
Hawaii – Cook (5 years)
Salvation Army ATS Honolulu
Hawaii – Weekend Cook (2 years)
Irvine Elizabeth F Fall 2014 CULN Semester Block 1, 7.5 (UN)
CULN Semester Block 2, 7.5 (UN)
Spring 2015
CULN Semester Block 1, 7.5 (UN)
CULN Semester Block 2, 7.5 (UN)
AAT Occupational Education Louisiana Technical College Sowela
Certifications:
DHH Food Safety Certification
ManageFirst Nutrition
ManageFirst Hosp. & Rest. Mgt.
ServSafe Food Protection Manager
Work Experience:
Neighborhood Grocery & Deli –
Self-Employed Owner (2 years)
Johnson Tyquencia P
Spring 2015 JOBS 2450, Job Seeking Skills, 2 (UN)
B.S. Family & Consumer Sciences Southern University
Work Experience:
BRCC Student Success Center
Manager (2 years)
Martin Traci P Fall 2014
CULN 1130, Sanitation and Safety, 3 (UN)
CULN 1170, Essentials of Dining Room Svc, 2 (UN)
B.S. Family and Consumer
Sciences Education (Vocational) Nicholls State University
Certifications:
Louisiana Department of Education
Teaching Certificate
Certified ServSafe Instructor and
Registered ServSafe Exam Proctor
DHH Food Safety Certification
Pitre Donna P Fall 2014
ORNT 1000, Freshman Seminar, 1 (UN)
M.B.A. Master of Business
Administration Nicholls State University
B.S. Business Education Nicholls State University
Work Experience:
South Central Louisiana Technical
College Lafourche Campus –
Campus Coordinator/E-Learning
Coordinator (21 years)
Travasos Michael F Fall 2014
CULN 1110, Culinary Math, 3 (UN)
CULN 1130, Sanitation and Safety, 3 (UN)
CULN 1140, Introduction to Culinary Skill, 3 (UN)
CULN 1160, Orientation to Culinary Hospit, 3 (UN)
CULN 1220, Nutrition, 3 (UN)
CULN 2995, Special Projects III, 3 (UN)
ORNT 1000, Freshman Seminar, 1 (UN)
(ORNT 1000 is a Pre-Semester Course)
Spring 2015
CULN 1110, Culinary Math, 3 (UN)
CULN 1130, Sanitation and Safety, 3 (UN)
CULN 1160, Orientation to Culinary Hospit, 3 (UN)
CULN 1220, Nutrition, 3 (UN)
CULN 1321, A'La Carte, 3 (UN)
CULN 2430, Food and Beverage Operations, 3 (UN)
ORNT 1000, Freshman Seminar, 1 (UN)
(ORNT 1000 is a Pre-Semester Course)
B.G.S. General Studies
Louisiana State University
Certifications:
ServSafe Food Protection Manager
ManageFirst Hospitality & Rest.
Mgt.
ManageFirst Nutrition
Certified ServSafe Instructor and
Registered ServSafe Exam Proctor
Work Experience:
Ruby Tuesday’s – Senior Assistant
Manager (1 year)
Piccadilly Cafeterias – Production
Manager (4 years)
Bombay Bicycle Club – Waiter (1.5
years)
The Place – Waiter (4 mos.)
White Lydia P Fall 2014
CULN 1130, Sanitation and Safety, 3 (UN)
CULN 1160, Orientation to Culinary Hospit, 3 (UN)
B.S. General Home Economics
(Food & Nutrition) Nicholls State University
Certifications:
Louisiana Department of Education
Teaching Certificate
ServSafe Certification
Certified ServSafe Instructor and
Registered ServSafe Examination
Proctor
Food Safety Certification
Faculty Roster Form
Qualifications of Full-Time and Part-Time Faculty
Name of Institution: Baton Rouge Community College
Name of Primary Department, Academic Program, or Discipline: Drafting and Design Technology
Academic Term(s) Included: Fall 2014, Spring 2015 Date Form Completed: January 9, 2015
1 2 3 4
NAME (F, P) COURSES TAUGHT
Including Term, Course Number & Title, Credit
Hours (D, UN, UT, G)
ACADEMIC DEGREES &
COURSEWORK
Relevant to Courses Taught,
Including Institution & Major
List specific graduate coursework,
if needed
OTHER QUALIFICATIONS &
COMMENTS
Related to Courses Taught
Haulard Richard F
Fall 2014
DRFT Semester Block 1, 7.5 (UN)
DRFT Semester Block 2, 7.5 (UN)
Spring 2015 DRFT Semester Block 1, 7.5 (UN)
DRFT Semester Block 2, 7.5 (UN)
M.S. Vocational Education
Louisiana State University
B.S. Industrial Technology
University of Southwestern
Certifications:
Teaching Certificate
Carpentry
Work Experience:
Avondale Shipyards – Senior
Estimator (3 years)
Raymond Fabricators – Project
Manager/Estimator (1 year)
De LaGard Creative Furniture –
Master Craftsman (4 months)
Self Employed – Remodeled Homes
(4 years)
Block scheduling is utilized in some
diploma areas to assist in class
scheduling. Block 1 refers to the
morning session of 3 hours of
instruction and block 2 refers to the
afternoon session of 3 hours of
instruction. Due to the many varying
lengths of drafting courses, dividing
the day instruction into 3 hour
segments better accommodates
student needs in this program area.
Utilizing this block format,
instructors are provided a path to
offer multiple lecture/lab courses
during the same time frame.
Williams Darnell F Fall 2014 DRFT Semester Block 1, 7.5 (UN)
DRFT Semester Block 2, 7.5 (UN)
Spring 2015
DRFT Semester Block 1, 7.5 (UN)
DRFT Semester Block 2, 7.5 (UN)
AAS Drafting & Design Technology CBM Education Center
Work Experience:
ExxonMobil (Resin Plant) – Senior
Designer (1 year)
Tudor Enterprises – Designer (4 yrs.)
(CDI) Spectrum Engineers –
Designer (7 years)
Furnish, Johnson & McDaniels
Consult. Engineers – Jr. Designer (3
years)
Ashton & Assoc. Consulting
Engineers– Senior Drafting Jr.
Designer at Exxon Refinery (6 yrs.)
Bovay Engineers – Drafter (5 yrs.)
Faculty Roster Form
Qualifications of Full-Time and Part-Time Faculty
Name of Institution: Baton Rouge Community College
Name of Primary Department, Academic Program, or Discipline: Graphics
Academic Term(s) Included: Fall 2014, Spring 2015 Date Form Completed: January 9, 2015
1 2 3 4
NAME (F, P) COURSES TAUGHT
Including Term, Course Number & Title, Credit
Hours (D, UN, UT, G)
ACADEMIC DEGREES &
COURSEWORK
Relevant to Courses Taught,
Including Institution & Major
List specific graduate coursework, if
needed
OTHER QUALIFICATIONS &
COMMENTS
Related to Courses Taught
Rankins Jerome P Fall 2014
GRPH 1530, Screen Printing, 3 (UN)
Spring 2015
GRPH 1400, Digital Prepress & Printing, 3 (UN)
GRPH 1530, Screen Printing, 3 (UN)
GRPH 2410, Offset Press Operations, 4 (UN)
B.S. Business (Marketing)
Southern University
Certifications:
Louisiana Department of Education
Teaching Certificate (Graphic and
Printing Equipment Operation)
Work Experience:
Office Depot – Copy Center Manager
(1 year)
Southern University – Press Operator
(8 years)
Louisiana State University – Press
Operator (8 months)
ACARD Printing – Graphic Artist &
Press Operator (3 months)
Deep South Printing – Press Operator
(6 months)
Xerox Reproduction Center – Offset
Operator (1 year)
Sindlinger & Co. – Graphic
Artist/Printer (9 months)
Replica Press – Graphic Artist (6
months)
Model Cities Cultural Art Program –
Public Relations Director (3½ yrs.)
Saia ST Angela F Fall 2014
GRPH Semester Block 1, 7.5 (UN)
GRPH Semester Block 2, 7.5 (UN)
Spring 2015
AAT Occupational Education
Louisiana Technical College Sowela
Diploma Graphic Communications
Louisiana Technical College
PIA PrintED Certifications:
Introduction to Printing
Basic Offset Press
Reproduction Photography
Image Assembly/Platemaking
GRPH Semester Block 1, 7.5 (UN)
GRPH Semester Block 2, 7.5 (UN)
Baton Rouge Electronic Imaging
Finishing and Binding
Advanced Press Operations
Advanced Electronic Prepress
Advanced Image
Assembly/Platemaking
Work Experience:
ASYS/As Angel – Self-Employed (22
years)
Street Signs, Inc. – Owner (15 yrs.)
Signs by Gayle – Graphics Designer
(8 years)
Louisiana Memorials & Signs –
Graphics Designer (5 years)
Action Advertising & Signs – Silk-
Screening (5 years)
City of Baton Rouge Sign Shop –
Designer (1984)
Creating Marketing Services – Sign
and Banner Production (1982)
Block scheduling is utilized in some
diploma areas to assist in class
scheduling. Block 1 refers to the
morning session of 3 hours of
instruction and block 2 refers to the
afternoon session of 3 hours of
instruction. Due to the many varying
lengths of air conditioning courses,
dividing the day instruction into 3
hour segments better accommodates
student needs in this program area.
Utilizing this block format, instructors
are provided a path to offer multiple
lecture/lab courses during the same
time frame.
Faculty Roster Form
Qualifications of Full-Time and Part-Time Faculty
Name of Institution: Baton Rouge Community College
Name of Primary Department, Academic Program, or Discipline: Horticulture/Landscape
Academic Term(s) Included: Fall 2014, Spring 2015 Date Form Completed: January 9, 2015
1 2 3 4
NAME (F, P) COURSES TAUGHT
Including Term, Course Number & Title, Credit
Hours (D, UN, UT, G)
ACADEMIC DEGREES &
COURSEWORK
Relevant to Courses Taught,
Including Institution & Major
List specific graduate coursework,
if needed
OTHER QUALIFICATIONS &
COMMENTS
Related to Courses Taught
Barnardez Marcus F Fall 2014
HORT Semester Block 1, 7.5 (UN)
HORT Semester Block 2, 7.5 (UN)
Spring 2015 HORT Semester Block 1, 7.5 (UN)
HORT Semester Block 2, 7.5 (UN)
B.S. Agriculture
Southern University
Diploma (Certificate)
LSU Ag Center Turf School
Certifications:
NCCER Master Trainer
NCCER Core Curricula Instructor
La. Dept. of Agriculture & Forestry
Landscape Horticulturist License
3-Ornamental & Turf Pest Control
5A-Aquatic Pest Control
6-Right of Way & Industrial
Control
8A-Mosquito Control Applicator
8C-Community Public Health
GS-General Standards
WPS- Trainer
La. Comm. & Tech. College System
Teaching Certificate - Horticulture
Work Experience:
Fred’s Greenhouse – Nurseryman
(2 years)
LSU Department of Agriculture -
Seed Laboratory Analyst (6 mos.)
Southern University - Poultry Farm
Intern (1 year)
Block scheduling is utilized in some
diploma areas to assist in class
scheduling. Block 1 refers to the
morning session of 3 hours of
instruction and block 2 refers to the
afternoon session of 3 hours of
instruction. Due to the many varying
lengths of horticulture courses,
dividing the day instruction into 3
hour segments better accommodates
student needs in this program area.
Utilizing this block format,
instructors are provided a path to
offer multiple lecture/lab courses
during the same time frame.
Sims Willie F Fall 2014
HORT Semester Block 1, 7.5 (UN)
HORT Semester Block 2, 7.5 (UN)
Spring 2015
HORT Semester Block 1, 7.5 (UN)
HORT Semester Block 2, 7.5 (UN)
A.A.S. Landscape Management
Tech. Hinds Community College
Certifications:
Certified Nursery and Landscape
Professional
Landscape Horticulturist License
AGS – Applicator General Standards
7D – School Employees
Work Experience:
State of Louisiana – Horticulture
Attendant (1.7 years)
BREC Park and Recreation Facilities
– Park Coordinator (3 years)
Faculty Roster Form
Qualifications of Full-Time and Part-Time Faculty
Name of Institution: Baton Rouge Community College
Name of Primary Department, Academic Program, or Discipline: Industrial Maintenance Technology
Academic Term(s) Included: Fall 2014, Spring 2015 Date Form Completed: January 9, 2015
1 2 3 4
NAME (F, P) COURSES TAUGHT
Including Term, Course Number & Title, Credit
Hours (D, UN, UT, G)
ACADEMIC DEGREES &
COURSEWORK
Relevant to Courses Taught,
Including Institution & Major
List specific graduate coursework,
if needed
OTHER QUALIFICATIONS &
COMMENTS
Related to Courses Taught
Johnson Monique P Fall 2014 IMMT 1132, Industrial Maint. Training I, 2 (UN)
M.S. Engineering Science Louisiana State University
B.S. Construction Management Louisiana State University
B.A. Architecture Louisiana State University
Certifications:
NCCER Core Curricula Craft Instructor
(Core Curricula and Project
Management)
Work Experience:
Parsons Brinkerhoff Engineering Firm
– FEMA Housing Inspections (Jan.
2004 – Present)
Gulf Coast Revitalization Construction
Co. – Various Projects (4.75 years)
JCJ Contractors – FEMA Housing
Inspections (2 years)
Beirman and Brooks – Refurbish
Houses (5 years)
AAB Building Systems (Canada) –
Asst. in Building Projects Worldwide
(1.5 years)
AAB Building Systems (Africa) –
Bldg. Project Architect (1 month)
United States Airforce – 236th Combat
Communication Squadron (6 years)
Morgan Janice P Fall 2014
CORE 1003, Introduction to Craft Skills, 3 (UN)
Certifications:
NCCER Instrumentation
NCCER Master Trainer
NCCER Industrial Electrician
NCCER Instrument Technician
OSHA 500 Trainer Course for the
Construction Industry
Work Experience:
Baton Rouge Community College –
Craft Specialist (2.5 years)
HMC Services – Corporate Safety
Director (9 months)
Triad Electric and Controls – Safety
Coordinator (1.5 years)
Dow Chemical/St. Charles Turnaround
– Instrumentation Technician (2 mos.)
Alexander Electrical and Instruments –
Elec. & Instrumentation Tech (2 yrs.)
Instrument Service Co. (TX) –
Instrument Technician/Foreman (4 mos.)
Dow Chemical/Westgate Contractor –
Instrument Technician (3.33 years)
Exxon – Instrument Technician (6 mos.)
Ciba-Geigy – Instrument and Electrical
Technician (7 months)
Faculty Roster Form
Qualifications of Full-Time and Part-Time Faculty
Name of Institution: Baton Rouge Community College
Name of Primary Department, Academic Program, or Discipline: Journeyman Industrial
Academic Term(s) Included: Fall 2014, Spring 2015 Date Form Completed: January 9, 2015
1 2 3 4
NAME (F, P) COURSES TAUGHT
Including Term, Course Number & Title, Credit
Hours (D, UN, UT, G)
ACADEMIC DEGREES &
COURSEWORK
Relevant to Courses Taught,
Including Institution & Major
List specific graduate coursework,
if needed
OTHER QUALIFICATIONS &
COMMENTS
Related to Courses Taught
Adams Gary P Fall 2014
JIND 1120, Apprentice Trade Related Math, 2 (UN)
JIND 1130, Apprentice Trade Tech Part I, 3 (UN)
JIND 1300, Apprentice Trade Tech Part IV, 5 (UN)
JIND 2200, Apprentice Trade Tec Part VI, 5 (UN)
Spring 2015 JIND 2100, Apprentice Trade Tech Part V, 5 (UN)
JIND 2210, Apprentice Trade Tec Part VII, 5 (UN)
JIND 2310, Apprenticeship Trade Tech Part IX, 5 (UN)
Coursework:
UA 198 Instructor Training:
UAT249 Arc Welding Practical
Fund. and Theory
UAT288 Methods in Teaching
Shielded Metal Arc Welding
UAT290 Methods in Teaching Gas
Tungsten Arc Welding
UAT239 AWS-CWI Prep Course &
Exam
UAT211 Foundations in Teaching
and Learning
UAT212 Planning and Teaching
Effective Lessons I
UAT213 Planning Teaching &
Assessing Effective Lessons:
Advanced
Basic Computer for the Trade
Teacher
UAT210 Public Speaking
Certifications:
Louisiana Workforce Commission
Baton Rouge Area Pipetrades JAC
Plumber Apprenticeship Completion
American Welding Society
Certified Welding Inspector
UA Local 198 JATC
Orbital Tube Welding Model 207/M-9
GTAW/SMAW Certifications
Work Experience:
National Maint. – Contractor (10 yrs.)
V.I.S., Inc.- Contractor (3 years)
Turner Maint – Contractor (1 month)
Bernhard Mech. - Contractor (1.5 yrs)
Airtrol, Inc. Contractor (5 years)
Local 562 (1 month)
Local 795 Pipe Trade (3 mos.)
Local 296 Idaho Plumber (3 mos.)
Local 537 (2 years)
Local 553 (4 years)
Allen Danny P Fall 2014
JIND 1100, Intro to Apprenticeship Trade, 3 (UN)
JIND 1110, Job Safety & Health, 2 (UN)
JIND 1200, App Trade Related Science, 2 (UN)
JIND 1210, App Trade Tech Part II, 3 (UN)
JIND 1300, Apprentice Trade Tech Part IV, 5 (UN)
JIND 2200 Apprentice Trade Tec Part VI, 5 (UN)
Certifications:
Letter of Support from Training Director
United Brotherhood of Carpenters &
Joiners of America Journeyman’s
Certificate of Completion
La. Carpenters Reg. Council Training Ctr.
Disaster Site Worker Train the Trainer
Millwright 16 Hour Safety
Spring 2015
JIND Semester Block 1, 7.5 (UN)
JIND Semester Block 2, 7.5 (UN)
OSHA 502 Construction
ICRA: Const. Trades Best Practices
Awareness Training Train the Trainer
Scaffold Qualification Train the Trainer
Construction Fall Protection Train
The Trainer
Rigging Qualification Train the Trainer
Material Safety Data Sheets Train the
Trainer
Work Experience:
Cherokee Construction Co. –
Forman/Superintendent (7 years)
Perinnie O & G – Forman & Welder (2 yrs.)
T.L. James & Harbert Construction –
Forman (1 year)
Various Companies - General Carpentry
Work (7 years)
Army Ammunition Plant – Millwright
apprentice/Journeyman/Forman (7 years)
Richmond and Stephens Floor Covering –
Floor Layer (2 years)
Block scheduling is utilized in some
diploma areas to assist in class scheduling.
Block 1 refers to the morning session of 3
hours of instruction and block 2 refers to
the afternoon session of 3 hours of
instruction. Due to the many varying
lengths of air conditioning courses,
dividing the day instruction into 3 hour
segments better accommodates student
needs in this program area. Utilizing this
block format, instructors are provided a
path to offer multiple lecture/lab courses
during the same time frame.
Ballard Sidney P
“Lane” Fall 2014
JIND 1120, Apprentice Trade Related Math, 2 (UN)
JIND 1130, Apprentice Trade Tech Part I, 3 (UN)
JIND 1300, Apprentice Trade Tech Part IV, 5 (UN)
JIND 2200, Apprentice Trade Tec Part VI, 5 (UN)
JIND 2300, Apprentice Trade Tech Part VIII, 5, (UN)
Spring 2015 JIND 1220, Customer Svc in Trade Area, 2 (UN)
Coursework:
UA Local 198 Instructor Training:
Related Science
Pipe Trades App. Drawing Valves
UAT262 Methods in Teaching
Drawing Interpretation and Plan
Reading
Trade Teaching Overview and
Conditioning for Learning
Certifications:
Letter of Support from Training Director
ITI AutoCad Basic Training, Version 13
Turner Ind. Safety Training Online Course
Technical Systems Project SAP R/3
Training
Nat’l Maint. Corp. Work Worth Doing
Work Experience:
JIND 1230, Apprentice Trade Tech Part IV, 3 (UN)
JIND 2100, Apprentice Trade Tech Part V, 5 (UN)
JIND 2210, Apprentice Trade Tec Part VII, 5 (UN)
JIND 2310, Apprenticeship Trade Tech Part IX, 5 (UN)
Structures for Learning
UAT213 Planning Teaching &
Assessing Effective Lessons: Advanced
Developing a UA CAD Training
Center
International Maintenance Co. (2 yrs)
National Maintenance (15½ years)
Bergeron Anthony P Fall 2014
JIND 1100, Intro to Apprenticeship Trade, 3 (UN)
JIND 1110, Job Safety & Health, 2 (UN)
JIND 1200, App Trade Related Science, 2 (UN)
JIND 1210, App Trade Tech Part II, 3 (UN)
JIND 1300, Apprentice Trade Tech Part IV, 5 (UN)
JIND 2200, Apprentice Trade Tec Part VI, 5 (UN)
JIND 2300, Apprentice Trade Tech Part VIII, 5, (UN)
Spring 2015 JIND 1220, Customer Svc in Trade Area, 2 (UN)
JIND 1230, Apprentice Trade Tech Part IV, 3 (UN)
JIND 2100, Apprentice Trade Tech Part V, 5 (UN)
JIND 2210, Apprentice Trade Tec Part VII, 5 (UN)
JIND 2310, Apprenticeship Trade Tech Part IX, 5 (UN)
Certifications:
International Training Institute Sheet Metal
& Air Cond. Industry Certifications:
Instructor Development 101B
Architectural Training
Advance 2 & 3
Work Experience:
Cribbs, Inc. – Shop Supervisor (February
2013 – Present)
Cribbs, Inc. – Sheetmetal Worker (13 yrs.)
Brashear Ronnie P Fall 2014
JIND 1120, Apprentice Trade Related Math, 2 (UN)
JIND 1130, Apprentice Trade Tech Part I, 3 (UN)
JIND 1300, Apprentice Trade Tech Part IV, 5 (UN)
JIND 2200, Apprentice Trade Tec Part VI, 5 (UN)
Spring 2015 JIND 1120, Apprentice Trade Related Math, 2 (UN)
JIND 1130, Apprentice Trade Tech Part I, 3 (UN)
JIND 1220, Customer Svc in Trade Area, 2 (UN)
JIND 1230, Apprentice Trade Tech Part IV, 3 (UN)
JIND 2210, Apprentice Trade Tec Part VII, 5 (UN)
JIND 2310, Apprenticeship Trade Tech Part IX, 5 (UN)
Coursework:
UA Local 198 Instructor Training:
Using UA Resources Instructor
Course
UAT265 Methods in Teaching the
HVACR Service Apprenticeship
Curriculum
UAT 308 Industrial/Commercial
Market Refrigeration/Green Chill
Certification
UAT296 UA Star Review - HVACR
Trade Teaching Overview and
Conditions for Learning
Structures for Learning
UAT203 Planning & Presenting Skill
& Related Information
UAT214 Techniques in Interaction
and Discussion and Developing
Individualized Instruction
UAT215 Problem Solving &
Innovations in Trade Teaching
Certifications:
Washtenaw Community College
Certified Instructor of Journeyworkers
and Apprentices in the Plumbing and
Pipefitting Industry
Louisiana Workforce Commission
Baton Rouge Area Pipetrades JAC
HVAC Apprenticeship Completion
UA Plumbers, Pipefitters Union
EPA-608 Technician Certification 40
CFR,Part 82, Subpart F
Work Experience:
Stone & Webster Constr. (2 years)
LOCAL 475 (2 mos)
LOCAL 60 (3 mos)
International Maint. Co. (1 yr)
PALA Maintenance (6 mos)
Carrier Corporation (9 years)
Johnson Controls, Inc. (10 year)
Lambert’s Heating & Air (6 mos)
Danna Jason P Fall 2014
JIND 2200, Apprentice Trade Tec Part VI, 5 (UN)
Spring 2015 JIND 1120, Apprentice Trade Related Math, 2 (UN)
JIND 1130, Apprentice Trade Tech Part I, 3 (UN)
JIND 2310, Apprenticeship Trade Tech Part IX, 5 (UN)
Certifications:
Letter of Support from Training Director
Work Experience:
Guise Sheet Metal (11 years)
Fontenot John P Fall 2014
JIND 2200, Apprentice Trade Tec Part VI, 5 (UN)
JIND 2300, Apprentice Trade Tech Part VIII, 5, (UN)
Certifications:
Letter of Support from Training Director
American Welding Society Certified
Welding Inspector
Hellier Technical Training & Consulting
Penetrant Testing Levels I/II
Magnetic Particle Testing Levels I/II
Washtenaw Community College
Certifcate of Completion of Instructors
Training Program (annual)
Krautkramer NDT Schools
Level I Ultrasonics
Level II Ultrasonics
Work Experience:
Deep South Crane & Rigging – Foreman
and Certified Welding Inspector (1996 –
Present)
Geraci Keith P Fall 2014 JIND 1100, Intro to Apprenticeship Trade, 3 (UN)
JIND 1110, Job Safety & Health, 2 (UN)
JIND 1200, App Trade Related Science, 2 (UN)
JIND 1210, App Trade Tech Part II, 3 (UN)
JIND 1300, Apprentice Trade Tech Part IV, 5 (UN)
JIND 2200 Apprentice Trade Tec Part VI, 5 (UN)
Spring 2015
JIND 1120, Apprentice Trade Related Math, 2 (UN)
JIND 1130, Apprentice Trade Tech Part I, 3 (UN)
JIND 2100, Apprentice Trade Tech Part V, 5 (UN)
Certifications:
Letter of Support from Training Director
International Training Institute Sheet Metal
& Air Cond. Industry Certifications:
Industrial I
Pipe Welding
Test Supervisor
Structural Welding
Certified Welding Inspector
1999-BWT2
Work Experience:
Atlas Blowpipe and Sheet Metal (July
2013 – Present)
DSM Sheet Metal (2 years)
Jolly’s Sheet Metal (3 years)
Gunther Steve P Fall 2014
JIND 1100, Intro to Apprenticeship Trade, 3 (UN)
JIND 1110, Job Safety & Health, 2 (UN)
JIND 1200, App Trade Related Science, 2 (UN)
JIND 1210, App Trade Tech Part II, 3 (UN)
JIND 1300, Apprentice Trade Tech Part IV, 5 (UN)
Spring 2015
JIND 1120, Apprentice Trade Related Math, 2 (UN)
JIND 1130, Apprentice Trade Tech Part I, 3 (UN)
Certifications:
Letter of Support from Training Director
Instructor Development 101
Work Experience:
Atlas Blowpipe and Sheet Metal (27 yrs.)
Kidder Eric Paul P Fall 2014
JIND 2200, Apprentice Trade Tec Part VI, 5 (UN)
Spring 2015 JIND 2210, Apprentice Trade Tec Part VII, 5 (UN)
Diploma of Completion
Nat’l Joint Apprenticeship and
Training Committee for the Electrical
Industry
Certifications:
State of Louisiana Department of Labor
Baton Rouge Electrical JATC
Completion
National Joint Apprenticeship and Training
Committee Electrical Industry:
Instrument Installation
Programmable Controllers
Work Experience:
Buffalo Electric – Foreman (9 years)
Stone & Webster – Journeyman Nuclear
Industry (2003)
Numerous construction jobs with various
electrical contractors (11 yrs.)
Knight Richard P Fall 2014 JIND 1100, Intro to Apprenticeship Trade, 3 (UN)
JIND 1110, Job Safety & Health, 2 (UN)
JIND 1120, Apprentice Trade Related Math, 2 (UN)
JIND 1130, Apprentice Trade Tech Part I, 3 (UN)
JIND 2300, Apprentice Trade Tech Part VIII, 5, (UN)
Certifications:
Letter of Support from Training Director
Local 152 Training Program
Valve Maintenance Training
Work Experience:
AMC Plant Service (9 months)
PALA Maintenance1.5 years)
Jacobs Construction (2 years)
AMEC Plant Services (6 months)
National Maintenance (16 months)
Local 619 (2 months)
Local 597 ( 1 year)
Berhnard Mechanical (4 months)
Stone & Webster Construction (9 months)
Louis Mechanical Cont. (2 months)
International Maint. Co. (6 months)
Various Local Unions (2 years)
Lherrison Paul P Fall 2014
JIND 1100, Intro to Apprenticeship Trade, 3 (UN)
JIND 1110, Job Safety & Health, 2 (UN)
Spring 2015
JIND 1120, Apprentice Trade Related Math, 2 (UN)
JIND 1130, Apprentice Trade Tech Part I, 3 (UN)
Diploma of Completion
Nat’l Joint Apprenticeship and
Training Committee for the Electrical
Industry
Certifications:
State of Louisiana Department of Labor
Baton Rouge Electrical JATC
Completion
National Joint Apprenticeship and Training
Committee Electrical Industry:
Master Instructor/Trainer
Instrumentation & Calibration Basics
Instrumentation Level I
Predictive Maintenance
Course 10 Principles of Learning
Course 11 Elements of Trade Teaching
Course 32 Teaching & Managing in a
Technical Laboratory
Course 30 Performance Evaluation
Course 42 Creating an Active Training
Environment
Course 41 Discussion Methods
Welding I
Work Experience:
Buffalo Electric – Journeyman
Wireman/Maintenance Electrician (2005 –
current)
Buffalo Electric – Electrician Apprentice
(1.25 years)
Todd Electric – Electrician Apprentice (4
months)
Accurate Electrical Services – Electrician
Apprentice (3 years)
Champion International – Line Person (8.5
years)
Maranto Joseph P Fall 2014
JIND 1120, Apprentice Trade Related Math, 2 (UN)
JIND 1130, Apprentice Trade Tech Part I, 3 (UN)
JIND 2200, Apprentice Trade Tec Part VI, 5 (UN)
Spring 2015
JIND 1120, Apprentice Trade Related Math, 2 (UN)
JIND 1130, Apprentice Trade Tech Part I, 3 (UN)
JIND 1220, Customer Svc in Trade Area, 2 (UN)
JIND 1230, Apprentice Trade Tech Part IV, 3 (UN)
JIND 2100, Apprentice Trade Tech Part V, 5 (UN)
JIND 2210, Apprentice Trade Tec Part VII, 5 (UN)
Certifications:
Louisiana Workforce Commission
Baton Rouge Area Pipetrades JAC
Plumber Apprenticeship Completion
State Plumbing Board of Louisiana
Journeyman Plumber License
Work Experience:
Maranto Mechanical LLC (May 2012 –
Present)
McLin Horace P Fall 2014
JIND 1300, Apprentice Trade Tech Part IV, 5 (UN)
Spring 2015 JIND 2100, Apprentice Trade Tech Part V, 5 (UN)
Certifications:
State of Louisiana Department of Labor
Baton Rouge Electrical JATC
Completion
National Joint Apprenticeship and Training
Committee Electrical Industry:
Certificate of Completion of Apprenticeship
Work Experience:
McLin Consulting – various electrical
projects in Baton Rouge area (3 years)
Todd Electric – Superintendent (18 years)
Apex Electric – Began as Estimator ended
as Vice President (10 years)
Saia Electric – started as Apprentice ended
as Shop Superintendent (14 years)
Milam Alford P Fall 2014
JIND 1100, Intro to Apprenticeship Trade, 3 (UN)
JIND 1110, Job Safety & Health, 2 (UN)
JIND 1200, App Trade Related Science, 2 (UN)
JIND 1210, App Trade Tech Part II, 3 (UN)
JIND 1300, Apprentice Trade Tech Part IV, 5 (UN)
JIND 2200, Apprentice Trade Tec Part VI, 5 (UN)
Spring 2015
JIND 1120, Apprentice Trade Related Math, 2 (UN)
JIND 1130, Apprentice Trade Tech Part I, 3 (UN)
JIND 1220, Customer Svc in Trade Area, 2 (UN)
JIND 1230, Apprentice Trade Tech Part IV, 3 (UN)
JIND 2100, Apprentice Trade Tech Part V, 5 (UN)
JIND 2210, Apprentice Trade Tec Part VII, 5 (UN)
JIND 2310, Apprenticeship Trade Tech Part IX, 5 (UN)
Certifications:
International Training Institute Sheet Metal
& Air Cond. Industry Certifications:
CPI
Test Supervisor
Welding Supervisor
Welding I
Basic B
Welding II
Work Experience:
Nix Sheet Metal – Sheet Metal
Worker/Shop Forman (1986 – Present)
Miller David P Fall 2014 JIND 1100, Intro to Apprenticeship Trade, 3 (UN)
JIND 1110, Job Safety & Health, 2 (UN)
Spring 2015
JIND 1120, Apprentice Trade Related Math, 2 (UN)
JIND 1130, Apprentice Trade Tech Part I, 3 (UN)
JIND 1220, Customer Svc in Trade Area, 2 (UN)
JIND 1230, Apprentice Trade Tech Part IV, 3 (UN)
JIND 2100, Apprentice Trade Tech Part V, 5 (UN)
JIND 2210, Apprentice Trade Tec Part VII, 5 (UN)
B.S. Mechanical Engineering Louisiana State University
Certifications:
Louisiana Workforce Commission
Sheet Metal Worker Apprenticeship
International Training Institute Sheet Metal
& Air Cond. Industry Certifications:
Basic A 2004
Learning TAB 2004
Advanced 2004
Architectural Instructor Training
Service Instructor Training
Work Experience:
JIND 2310, App. Trade Tech Part IX, 5 (UN)
Sheet Metal Workers Local 214 Baton
Rouge – Sheet Metal Mechanic, TAB
Technician, HVAC Service/Installation
Technician (12 years)
Miller Robert P Fall 2014 JIND 1120, Apprentice Trade Related Math, 2 (UN)
JIND 1130, Apprentice Trade Tech Part I, 3 (UN)
JIND 1300, Apprentice Trade Tech Part IV, 5 (UN)
JIND 2200, Apprentice Trade Tec Part VI, 5 (UN)
Spring 2015
JIND 1120, Apprentice Trade Related Math, 2 (UN)
JIND 1130, Apprentice Trade Tech Part I, 3 (UN)
JIND 1220, Customer Svc in Trade Area, 2 (UN)
JIND 1230, Apprentice Trade Tech Part IV, 3 (UN)
Certifications:
Letter of Support from Training Director
Louisiana Workforce Commission
Baton Rouge Area Pipetrades JAC
Pipefitter Apprenticeship Completion
UA Local 198 JATC:
NMAP: Nuc Mech Appr
GTAW/SMAW Certifications
Work Experience:
Various Local Unions (8.25 years)
Pala Maintenance (2 months)
National Maintenance (4 months)
Stone & Webster Const. (20 months)
International Maintenance (2 mos.)
Bernhard Mechanical (4 years)
Gallo Mechanical Cont. (6 mos.)
Applied Ambient Extrac. (1 year)
Pipeline Industries (2.25 years)
Airtrol, Inc. (4 months)
Bob Bernhard & Assoc (5 months)
Monaghan Daniel P Fall 2014
JIND 2200, Apprentice Trade Tec Part VI, 5 (UN)
Spring 2015 JIND 1120, Apprentice Trade Related Math, 2 (UN)
JIND 1130, Apprentice Trade Tech Part I, 3 (UN)
JIND 2100, Apprentice Trade Tech Part V, 5 (UN)
JIND 2210, Apprentice Trade Tec Part VII, 5 (UN)
Certifications:
Letter of Support from Training Director
Instructor Development 101
Work Experience:
Joly’s Sheet Metal (2001 – Present)
Perniciao James P Fall 2014 JIND 1100, Intro to Apprenticeship Trade, 3 (UN)
JIND 1110, Job Safety & Health, 2 (UN)
JIND 1200, App Trade Related Science, 2 (UN)
JIND 1210, App Trade Tech Part II, 3 (UN)
JIND 1300, Apprentice Trade Tech Part IV, 5 (UN)
JIND 2200, Apprentice Trade Tec Part VI, 5 (UN
Certifications:
Letter of Support from Training Director
OSHA 502 Construction
Millwright 16 Hour Safety
Train the Trainer:
Disaster Site Worker
Construction Fall Protection
Rigging Qualification
Aerial Life Operator Qualification
Fall Protection
Millwright Precision Optical Alignment
GE Gas Turbine Qualification
Seimens Combustion Turbine Qualification
GE Gas Turbine Familiarization
Machinery Alignment Procedures
Work Experience:
Refinery and PetroChemical Plants –
Millwright/Machinist (3 years)
Elliott On Site Services – Millwright/
Machinist (3 years)
Gulf Engineering Serv. and Installation –
Millwright/Machinist (8 years)
Associated Mechanical Contractors –
Millwright (3 years)
Rispone Royce P Fall 2014 JIND 1200, App Trade Related Science, 2 (UN)
JIND 1210, App Trade Tech Part II, 3 (UN)
Spring 2015
JIND 1220, Customer Svc in Trade Area, 2 (UN)
JIND 1230, Apprentice Trade Tech Part IV, 3 (UN)
Certifications:
State of Louisiana Department of Labor
Baton Rouge Electrical JATC
Completion
National Joint Apprenticeship and Training
Committee Electrical Industry:
Certificate of Completion of Apprenticeship
National Joint Apprenticeship and Training
Committee Electrical Industry:
AMP Act Installation and Connectorization
of LAN Cabling Systems
Actuator Maintenance and
Refuberishment & Votes Diagnostic
Testing Support Qualification Course
3M Power Cable Accessory Seminar
Work Experience:
Stone & Webster Engineering Corp. –
Workplan Writer/Supervisor (January 1992
– Present)
Dynaelectric Company – Field Engineer (6
mos.)
Estimate Express – Electrical Estimator (5
mos.)
Stone & Webster Engineering Corp –
Electrical Foreman (7 mos.)
MMR Corporation/William’s Electric Co.
– Electrician (3 mos.)
Various Electric Companies – Electrical
Apprentice (4 years)
Robinson Benjamin P Fall 2014
JIND 1100, Intro to Apprenticeship Trade, 3 (UN)
JIND 1110, Job Safety & Health, 2 (UN)
JIND 1200, App Trade Related Science, 2 (UN)
JIND 1210, App Trade Tech Part II, 3 (UN)
JIND 1300, Apprentice Trade Tech Part IV, 5 (UN)
JIND 2200, Apprentice Trade Tec Part VI, 5 (UN)
JIND 2300, Apprentice Trade Tech Part VIII, 5, (UN)
Certifications:
Letter of Support from Training Director
Sheet Metal and Air Conditioning
Apprenticeship
Sheet Metal Worker
Work Experience:
Atlas Blowpipe (October 2012 - Present)
Acadiana Sheet Metal (3 years)
Rogers Randall P Fall 2014
JIND 2300, Apprentice Trade Tech Part VIII, 5, (UN)
Spring 2015 JIND 2310, App. Trade Tech Part IX, 5 (UN)
Diploma of Completion
Nat’l Joint Apprenticeship and
Training Committee for the Electrical
Industry
Certifications:
State of Louisiana Department of Labor
Baton Rouge Electrical JATC
Completion
National Joint Apprenticeship and Training
Committee Electrical Industry:
Course 10 Principles of Learning
Course 11 Elements of Trade Teaching
Course 30 Performance Evaluation
Course 31 Supervising and Instruction
On-the-Job
Course 40 Implementing Indiv. Instruction
Course 41 Discussion Methods
Course 50 Leadership Theory and Practice
Course 60 Labor History and Process of
Relationships
AMP Act I
Intro to Programmable Logic Controllers
Instrumentation Level I Fundamentals of
Instrumentation Train the Trainer
Instrumentation Level II Fundamentals
of Control Train the Trainer
AMP ACT Installation and
Connectorization of LAN Cabling Systems
SENTRY Program for Insulated Aerial
Devices
SENTRY Program for Digger Derricks
Instrumentation Level 1 Train-the-Trainer
Construction Organizing Membership
Education Training
La Dept. of Educ. Type S Teaching
Certificate
Work Experience:
Buffalo Electric – Electrical
Apprentice/Shop Forman (7 years)
Todd Electric – Electrical Apprentice (1
year)
S & S Electric – Electrical Apprentice (10
mos.)
Salassi Damien P Fall 2014 JIND 1100, Intro to Apprenticeship Trade, 3 (UN)
JIND 1110, Job Safety & Health, 2 (UN)
JIND 1200, App Trade Related Science, 2 (UN)
JIND 1210, App Trade Tech Part II, 3 (UN)
JIND 1300, Apprentice Trade Tech Part IV, 5 (UN)
JIND 2200, Apprentice Trade Tec Part VI, 5 (UN)
JIND 2300, Apprentice Trade Tech Part VIII, 5, (UN)
Spring 2015
JIND 1120, Apprentice Trade Related Math, 2 (UN)
JIND 1130, Apprentice Trade Tech Part I, 3 (UN)
JIND 1220, Customer Svc in Trade Area, 2 (UN)
JIND 1230, Apprentice Trade Tech Part IV, 3 (UN)
JIND 2100, Apprentice Trade Tech Part V, 5 (UN)
JIND 2310, App. Trade Tech Part IX, 5 (UN)
AA Labor Education National Labor College
Silver Spring, MD
BS Mathematics
Louisiana State University
Certifications:
American Welding Society AWS QC1,
Standard for AWS Certification of
Welding Inspectors
Louisiana Workforce Commission
Sheet Metal Worker Apprenticeship
International Training Institute Sheet Metal
& Air Cond. Industry Certifications:
Sheet Metal & A/C Apprenticeship
Basic B 2006
Test Supervisor
Industrial
Instructor Development 201/301B
National Labor College Degree Program
Welding Supervisor
Grinding and Polishing
Work Experience:
B & C Sheet Metal – Sheet Metal
Journeyman (1.5 years)
United Anco – Sheet Metal Foreman (4 yrs)
Baton Rouge Metal Fabrication – Sheet
Metal Apprentice and Journeyman (3.5
years)
Sibley Jesse P Fall 2014 JIND 1100, Intro to Apprenticeship Trade, 3 (UN)
JIND 1110, Job Safety & Health, 2 (UN)
JIND 1300, Apprentice Trade Tech Part IV, 5 (UN)
JIND 2200, Apprentice Trade Tec Part VI, 5 (UN)
JIND 2300, Apprentice Trade Tech Part VIII, 5, (UN)
Certifications:
Letter of Support from Training Director
Sheet Metal Worker
Work Experience:
Deltak Manufacturing – Sheet Metal
Journeyman, Apprentice, and Welder/
Laborer (11 years)
Smith Darnese P Fall 2014
JIND 1100, Intro to Apprenticeship Trade, 3 (UN)
JIND 1110, Job Safety & Health, 2 (UN)
Coursework:
Welding 1011 through 1015
Blueprint Reading
Safety-Scaffold E/D
Pre-Engineered Metal Buildings
Architectural and Ornamental
Construction I
Rigging for Ironworkers
Qualified Cranes Signalman
Certifications:
Letter of Support from Training Director
OSHA 10
Subpart R
Disaster Response Training
Rigging Certification
Signaling Certification
Orientation
Sonnier Joshua P Fall 2014
JIND 1200, App Trade Related Science, 2 (UN)
JIND 1210, App Trade Tech Part II, 3 (UN)
JIND 1300, Apprentice Trade Tech Part IV, 5 (UN)
Spring 2015
JIND 1120, Apprentice Trade Related Math, 2 (UN)
JIND 1130, Apprentice Trade Tech Part I, 3 (UN)
Certifications:
Letter of Support from Training Director
Work Experience:
ReeB Rigging/Weight Tech Engineering –
Oper. Mgr. (9 mos.)
B & G Crane and Rigging – Rigging
Supervisor (4 years)
Deep South Crane & Rigging – Rigger (1.5
yrs.)
Ironworker Local Union #623 – Rigger,
Welder, Connector, Gen. Foreman,
Rodman (1997 – Present)
Tapp Bruce P Fall 2014 JIND 1200, App Trade Related Science, 2 (UN)
JIND 1210, App Trade Tech Part II, 3 (UN)
JIND 1300, Apprentice Trade Tech Part IV, 5 (UN)
Spring 2015 JIND 1120, Apprentice Trade Related Math, 2 (UN)
JIND 1130, Apprentice Trade Tech Part I, 3 (UN)
JIND 1220, Customer Svc in Trade Area, 2 (UN)
JIND 1230, Apprentice Trade Tech Part IV, 3 (UN)
Certifications:
Letter of Support from Training Director
Work Experience:
Verges Sheet Metal (2001 – Present)
Atlas Blowpipe and Sheet Metal (27 years)
Thoms Troyce P Fall 2014
JIND 1200, App Trade Related Science, 2 (UN)
JIND 1210, App Trade Tech Part II, 3 (UN)
Certifications:
National Ironworkers Instructors Training
Program (annual)
OSHA 500
Foreman Training for Ironworkers
Heaving Lift Rigging
Fundamentals of Rigging
Work Experience:
Ironworkers Apprentice Program –
Training Director/Instructor (2 years)
B&G Crane Service – Rigger (5 years)
Turner Industries – Rigger (9 months)
Stone Bridge Steel Erectors – Rigger (4½
years)
Northeast Steel Erectors – Rigger (10 mos.)
Vince Lawrence P Fall 2014
JIND 2200, Apprentice Trade Tec Part VI, 5 (UN)
JIND 2300, Apprentice Trade Tech Part VIII, 5, (UN)
Certifications:
Letter of Support from Training Director
Baton Rouge Area Pipetrades JATC
Pipefitter Apprenticeship Completion
State Plumbing Board of Louisiana
Master Plumbers License
State Plumbing Board of Louisiana
Medical Gas Installer
Waddell Jonathan P Fall 2014
JIND 2200, Apprentice Trade Tec Part VI, 5 (UN)
JIND 2300, Apprentice Trade Tech Part VIII, 5, (UN)
Certifications:
Letter of Support from Training Director
Work Experience:
Faculty Roster Form
Qualifications of Full-Time and Part-Time Faculty
Name of Institution: Baton Rouge Community College
Name of Primary Department, Academic Program, or Discipline: Occupational Education
Academic Term(s) Included: Fall 2014, Spring 2015 Date Form Completed: January 9, 2015
1 2 3 4
NAME (F, P) COURSES TAUGHT
Including Term, Course Number & Title, Credit
Hours (D, UN, UT, G)
ACADEMIC DEGREES &
COURSEWORK
Relevant to Courses Taught,
Including Institution & Major
List specific graduate coursework,
if needed
OTHER QUALIFICATIONS &
COMMENTS
Related to Courses Taught
Levrier Brady P Fall 2014
OCED 2020, OCED Safety and Health., 3 (UN)
Ph.D. Vocational Education
Louisiana State University
M.S. Industrial Education
Louisiana State University
B.S. Industrial Arts Education Louisiana State University
Certifications:
Teaching Certificate
Industrial Arts
Work Experience:
Dev. Educ. Professor (18 years)
Industrial Arts Teacher (4 years)
Graduate Assistant (4 years)
Drafting Instructor (4 years)
Industrial Arts Instructor (2 years)
Faculty Roster Form
Qualifications of Full-Time and Part-Time Faculty
Name of Institution: Baton Rouge Community College
Name of Primary Department, Academic Program, or Discipline: Office Administration
Academic Term(s) Included: Fall 2014, Spring 2015 Date Form Completed: January 9, 2015
1 2 3 4
NAME (F, P) COURSES TAUGHT
Including Term, Course Number & Title, Credit
Hours (D, UN, UT, G)
ACADEMIC DEGREES&
COURSEWORK
Relevant to Courses Taught,
Including Institution & Major
List specific graduate coursework,
if needed
OTHER QUALIFICATIONS &
COMMENTS
Related to Courses Taught
Chenevert Linda P Fall 2014 OADM 1100, Keyboarding I, 3 (UN)
B.S. Secondary Education
(Business)
Southern University
Certifications:
Louisiana Department of Education
Teaching Certificate
IC3 Internet and Computing Core Cert.
IC3 Authorized Educator
Gault Allison P
Fall 2014
CSRV 1000, Customer Service, 3 (UN)
Spring 2015
CSRV 1000, Customer Service, 3 (UN)
B.S. Business Administration
Louisiana Tech University
Certifications:
IC3 Internet and Computing Core Cert.
MS Office Spec. Word 2010 Expert
MS Office Specialist Excel 2010
MS Office Specialist PowerPoint 2010
MS Office Specialist Outlook 2010
CIW Site Development Associate
Gilbert Sonya P Fall 2014 OADM 1100, Keyboarding I, 3 (UN)
M.Ed. ADM Supervision Southern University
B.S. Education – Vocational
Business and Shorthand
Southern University
Certifications:
Louisiana Department of Education
Teaching Certificate
Givens Belvin F Fall 2014 CSRV 1000, Customer Service, 3 (UN)
OADM 1100, Keyboarding I, 3 (UN)
OADM 1140, Office Technology Applications, 3 (UN)
OADM 1180, Records Management, 3 (UN)
OADM 1336, Fund of Business Comm., 3 (UN)
Spring 2015
OADM Semester Block 1, 7.5 (UN)
M.Ed. Secondary Education Southern University
B.S. Secondary Educ. (Business)
Southern University
B.S. Business (Accounting)
Southern University
Certifications:
Teaching Certificate
Office Systems Technology
Work Experience:
Southern University College of Bus
and College of Educ – Secretary (4
years)
Olsten Temporary Agency – Secretary
OADM Semester Block 2, 7.5 (UN)
(3 years)
Ethyl Corp. – Secretary (3 years)
Southern University Dept. of
Counselor Educ. – Steno III (5 yrs.)
Block scheduling is utilized in some
diploma areas to assist in class
scheduling. Block 1 refers to the
morning session of 3 hours of
instruction and block 2 refers to the
afternoon session of 3 hours of
instruction. Due to the many varying
lengths of air conditioning courses,
dividing the day instruction into 3 hour
segments better accommodates student
needs in this program area. Utilizing
this block format, instructors are
provided a path to offer multiple
lecture/lab courses during the same
time frame.
Guillory Ramonica P Fall 2014 OADM 1100, Keyboarding I, 3 (UN)
OADM 1450, Basic Word Processing, 3 (UN)
M.Ed. ADM Supervision Southern University
B.S. Education – Vocational
Business
Southern University
Certifications:
Louisiana Department of Education
Teaching Certificate
Microsoft Office Spec./Word 2010
Microsoft Office Spec./Excel 2010
Microsoft Office Spec./PPT 2007
IC3 Internet and Computing Core Cert.
Customer Service
Jarrell Loretta F Fall 2014 OADM Semester Block 1, 7.5 (UN)
OADM Semester Block 2, 7.5 (UN)
Spring 2015
OADM Semester Block 1, 7.5 (UN)
OADM Semester Block 2, 7.5 (UN)
B.S. Business Education Southern University
Certifications:
Microsoft Office Spec./Word 2007
Microsoft Office Spec./Excel 2007
Teaching Certificate Business
Work Experience:
Division of Administration -
Administrative Assistant (5 years)
Olsten’s Temp Agency – Customer
Service Rep (2 years)
White Tammie P Fall 2014
OADM 1100, Keyboarding I, 3 (UN)
M.Ed. ADM Supervision
Southern University
B.S. Education – Vocational
Business Southern University
Certifications:
Louisiana Department of Education
Teaching Certificate
CIW Internet Business Associate
Microsoft Office Spec./Word 2007
Microsoft Office Spec./PPT 2007
IC3 Internet and Computing Core Cert.
Customer Service
Wilkerson Debra P Fall 2014
OADM 1100, Keyboarding I, 3 (UN)
OADM 1450, Basic Word Processing, 3 (UN)
Ed.S. Educational Technology
Northwestern State University
M.Ed. Secondary Education
Southern University
B.S. Business
Southern University
Certifications:
Louisiana Department of Education
Teaching Certificate
National Board Certified Teacher
Microsoft Office Spec./Word 2010
Microsoft Office Spec./Excel 2010
IC3 Internet and Computing Core Cert.
F, P: Full-time or Part-time; D, UN, UT, G: Developmental, Undergraduate Nontransferable, Undergraduate Transferable, Graduate
Faculty Roster Form
Qualifications of Full-Time and Part-Time Faculty
Name of Institution: Baton Rouge Community College
Name of Primary Department, Academic Program, or Discipline: Upholstery Technology
Academic Term(s) Included: Fall 2014, Spring 2015 Date Form Completed: January 9, 2015
1 2 3 4
NAME (F, P) COURSES TAUGHT
Including Term, Course Number & Title,
Credit Hours (D, UN, UT, G)
ACADEMIC DEGREES &
COURSEWORK
Relevant to Courses Taught,
Including Institution & Major
List specific graduate coursework,
if needed
OTHER QUALIFICATIONS &
COMMENTS
Related to Courses Taught
Bourgeois Lee F Fall 2014
UPHO Semester Block 1, 7.5 (UN)
UPHO Semester Block 2, 7.5 (UN)
Spring 2015 UPHO Semester Block 1, 7.5 (UN)
UPHO Semester Block 2, 7.5 (UN)
AAT Occupational Education
Sowela Technical Community
College
Certifications:
National Occupational Competency
Testing Institute Upholstery
Certification
NCCER Core Curricula Instructor
Department of Education
Teaching Certificate Upholstery
Work Experience:
Son’s Upholstery – Upholsterer (10.75 yrs)
Hebert’s Upholstery – Upholsterer (3.75 yrs)
Abear’s Upholstery – Upholsterer (1.33 yrs)
Block scheduling is utilized in some diploma
areas to assist in class scheduling. Block 1
refers to the morning session of 3 hours of
instruction and block 2 refers to the afternoon
session of 3 hours of instruction. Due to the
many varying lengths of upholstery courses,
dividing the day instruction into 3 hour
segments better accommodates student needs
in this program area. Utilizing this block
format, instructors are provided a path to offer
multiple lecture/lab courses during the same
time frame.
Faculty Roster Form
Qualifications of Full-Time and Part-Time Faculty
Name of Institution: Baton Rouge Community College
Name of Primary Department, Academic Program, or Discipline: Welding
Academic Term(s) Included: Fall 2014, Spring 2015 Date Form Completed: January 9, 2015
1 2 3 4
NAME (F, P) COURSES TAUGHT
Including Term, Course Number & Title, Credit
Hours (D, UN, UT, G)
ACADEMIC DEGREES &
COURSEWORK
Relevant to Courses Taught,
Including Institution & Major
List specific graduate coursework,
if needed
OTHER QUALIFICATIONS &
COMMENTS
Related to Courses Taught
Adams Donald F Fall 2014
WELD Semester Block 1, 7.5 (UN)
WELD Semester Block 2, 7.5 (UN)
Spring 2015 WELD Semester Block 1, 7.5 (UN)
WELD Semester Block 2, 7.5 (UN)
Certifications:
NCCER Craft Instructor (Core,
Pipefitting, Welding)
Work Experience:
Dixon Correctional Institute –
Maintenance Superintendent (3 yrs.)
Spillman Industries – Fabricator (2
years)
Pac Tec – Fabricator
Rex Technical S & W – Project
Manager (4 years)
Thermal Systems of New England –
Piping Superintendent (3 years)
Petrochemical Refineries Baton
Rouge Area – Pipefitter/Welder (14
years)
Block scheduling is utilized in some
diploma areas to assist in class
scheduling. Block 1 refers to the
morning session of 3 hours of
instruction and block 2 refers to the
afternoon session of 3 hours of
instruction. Due to the many varying
lengths of welding courses, dividing
the day instruction into 3 hour
segments better accommodates
student needs in this program area.
Utilizing this block format,
instructors are provided a path to
offer multiple lecture/lab courses
during the same time frame.
Allen Billy F Fall 2014
WELD Semester Block 1, 7.5 (UN)
WELD Semester Block 2, 7.5 (UN)
Spring 2015
WELD Semester Block 1, 7.5 (UN)
WELD Semester Block 2, 7.5 (UN)
Certifications:
NCCER Welding Instructor
NCCER Core Curricula Instructor
NCCER Craft Instructor
Work Experience:
Jetson Correctional – Welder/Fitter
(7 months)
Auston Volcun, IMC, Harmony –
Pipe Welder (3 years)
Harmony Const. – Pipe Welder (2 yrs)
National Maintenance – Welder
Fitter (1 year 3 mos)
Transcontinental Gas Pipeline –
Structural Welder-Fitter (2½ years)
Fish Bach & More – Structural
Welder (2 years)
Benoit John F Fall 2014 WELD Semester Block 1, 7.5 (UN)
WELD Semester Block 2, 7.5 (UN)
Spring 2015
WELD Semester Block 1, 7.5 (UN)
WELD Semester Block 2, 7.5 (UN)
Certifications:
National Occupational Competency
Testing Institute Welding Cert.
Work Experience:
River Parishes Contractors –
Combination Welder (4 years)
Turner Industries, Harmony LLC –
Combination Welder (8 years)
CEI Fabricators – Combination
Welder (5 years)
Boone Dennis F Fall 2014 WELD Semester Block 1, 7.5 (UN)
WELD Semester Block 2, 7.5 (UN)
Spring 2015
WELD Semester Block 1, 7.5 (UN)
WELD Semester Block 2, 7.5 (UN)
AAT Occupational Education Sowela Technical Community
College
Diploma Welding
Louisiana Technical College
Baton Rouge
Certifications:
American Welding Society
Certified Welding Educator
NCCER Core Curricula Ind. Welding
NCCER Master Trainer
Work Experience:
Harmony Construction – Pipe
Fitter/Welder (9 years)
Browning Ferris – Welder (2 years)
Raco Machine Works –
Welder/Fabricator (4 years)
Collins Lestly F Fall 2014
WELD Semester Block 1, 7.5 (UN)
WELD Semester Block 2, 7.5 (UN)
Spring 2015
WELD Semester Block 1, 7.5 (UN)
WELD Semester Block 2, 7.5 (UN)
Certifications:
NCCER Core Curricula Instructor
NCCER Welding Instructor
American Welding Society
Certified Welding Educator
La. Comm. & Tech College System
Teaching Certificate Welding
Work Experience:
Trinity Shipyard – Welder (10 yrs)
Pax Industries – Welder (4 years)
SS&S Fabricators – Welder (3 yrs)
Amron Pipe – Welder Leaderman
(5 years)
Dowling Angela F Fall 2014 WELD Semester Block 1, 7.5 (UN)
WELD Semester Block 2, 7.5 (UN)
Spring 2015
WELD Semester Block 1, 7.5 (UN)
WELD Semester Block 2, 7.5 (UN)
Certifications:
American Welding Society
Certified Welding Inspector
Work Experience:
Various plants throughout the United
States – Combo Pipe Welder (19 yrs.)
Greer Willie F Fall 2014 WELD Semester Block 1, 7.5 (UN)
WELD Semester Block 2, 7.5 (UN)
Certifications:
American Welding Society
Certified Welding Educator
NCCER Welding Instructor
NCCER Industrial Welding Instructor
Work Experience:
Jetson Center for Youth – Welding
Shop Foreman (7 years)
Dixon Correctional Institute –
Corrections Officer incl. supervision
of welding crew (11 years)
Boatner Construction – Carpenter’s
Helper (6 months)
Lafayette Steel Erectors –
Ironworker & Welder (2 years)
Harmony Construction – Ironworker
& Welder (1 year)
Moreau Parker F Fall 2014
WELD Semester Block 1, 7.5 (UN)
WELD Semester Block 2, 7.5 (UN)
Spring 2015
WELD Semester Block 1, 7.5 (UN)
AAS Occupational Education Baton Rouge Community College
Certifications:
National Occupational Competency
Testing Institute Welding Cert.
NCCER Core Curricula Instructor
NCCER Industrial Welding Instructor
American Welding Society
WELD Semester Block 2, 7.5 (UN)
Certified Welding Educator
Work Experience:
Turner Industries - Fabricator/Pipe
Fitter/Welder/Designer (3 years)
Hayes Manufacturing -
Pipe Fitter/Welder/Construction
(5 months)
JM Manufacturing/Turner -
Fabricator/Engineer/Designer
(1.5 years)
Turner Industries - Fitter/Welder (2
years)
Special Stainless Ltd. -
Draftsman/Construction/Estimator (8
years)
Smith Stephan F Fall 2014
WELD Semester Block 1, 7.5 (UN)
WELD Semester Block 2, 7.5 (UN)
Spring 2015 WELD Semester Block 1, 7.5 (UN)
WELD Semester Block 2, 7.5 (UN)
Certifications:
National Occupational Competency
Testing Institute Welding Cert.
NCCER Core Curricula Instructor
NCCER Industrial Welding Instructor
NCCER Pipefitter Level II
NCCER Pipefitter Level III
Work Experience:
Plaquemine Point Shipyard –
Fitter/Welder (3 years)
T.T Barge Service – Fitter/Welder
(1.5 years)
Avondale Shipyard – Fitter/Welder
(1.75 years)
Bollinger Shipyard – Fitter/Welder
(1 year)
Trinity Marine – Fitter/Welder (1.5
years)
Zaunbrecher
Damion F Fall 2014
WELD Semester Block 1, 7.5 (UN)
WELD Semester Block 2, 7.5 (UN)
Spring 2015 WELD Semester Block 1, 7.5 (UN)
WELD Semester Block 2, 7.5 (UN)
Certifications:
National Occupational Competency
Testing Institute Welding Cert.
NCCER Core Curricula Instructor
NCCER Industrial Welding Instructor
American Welding Society
Certified Welding Educator
Work Experience:
Wyatt Field Service -
Welder/Pipefitter (2 years)
Zaunbrecher Farms - Heavy
Equipment Operator/Welder (3 yrs)
Turner Industries – Pipefitter (1 ys)