pvc electrical insulation tape - sealumet · pvc electrical insulation tape typical values...
TRANSCRIPT
Thermal Insulation Products - Tapes, Foils & PIB
Sealumet (Australia) Pty LimitedMailing Address : PO Box 2218, Warwick, Perth, WA, 6024Warehouse : Unit 2, 6 Langar Way, Landsdale, Perth, WA - 6065Telephone : +618 6201 6153, Fax : +618 9303 4560E-mail: [email protected] Website: www.sealumet.comDISCLAIMERThese data sheets are based on specifications, data and test results at time of publication. No guarantee as to completeness, accuracy or results is either expressed or implied. The suitability foran intended use is the responsibility of the user. As choice of material, method of application and site conditions are beyond our control we accept no liability for direct or consequential damages.Any material proved to be defective within the published shelf life* will be replaced. *From date of supply.
DescriptionPVC Electrical Insulation Tape, flame retardant / self-extinguishing. Offers good conformability.
Colours - Black, White, Grey, Red, Green, Blue, Yellow, Brown,Orange, Violet, Yellow/Green, Service Green, Light ThermalGrey.
ApplicationsWire and cable insulation, colour coding of electrical cables,loom harnessing, stopping off in plating, prevention ofelectrolytic corrosion, packaging applications, drum or tubesealing.
SpecificationCertification to the following standards may be available onrequest. BS3924 31/907p. BS4J10. BS3887:IEC 454-3-I andAS1621.
Note: Except where indicated otherwise the above figures areaverage values and should not be regarded as the MAXIMUMor MINIMUM values for any specification purposes. Thecompany reserves the right to improve products and anychange in the specification will result in a re-issue of therelevant ‘Technical Data’ sheet. Customers should satisfythemselves that the tape is suitable for their requirements,whether after such modifications or otherwise. Please checkthat you have the latest copy of the ‘Technical Data’ sheet. Allslitting and length tolerances are to British Standards, but othertolerances are available on request. Before use the customer isadvised to consult the Health & Data sheet produced by thecompany for this product, which is available on request.
Technical Details
PVC Electrical Insulation Tape
Typical Values
Thickness 0.145mm
Breaking Load 26 N/cm
Elongation 180%
Adhesion-Steel 2.6N/cm-Self 2.1N/cm
Water extractpH 6.8Conductivity Max. 2mS/m
Electrical PropertiesB/down Voltage 8.0 kVI Min proof test 6.0 kVInsulation Resist 10 mega ohmsCu Corrosion No staining
Flame Retardancy Self extinguishing.
Service Temp -5 deg C to 70 deg C
Application Temp 0 deg C to 40 deg C
Storage Temp 12 deg C to 25 deg C
StorageTapes stored below the minimum application temperature willrequire warning up to that level before use. Up to 24 hours maybe required for this to take place.
SL0072