push start - ie · annÉes immobilizer bypass lock unlock arm disarm parking lights tachometer door...
TRANSCRIPT
* HOOD PIN HOOD STATUS : THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.
CONTACTDE CAPOT
MANDATORY INSTALL | INSTALLATION OBLIGATOIRE Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed. Notice: l'installation des éléments de sécurité est obligatoire. Le contact de capot est un élément de sécurité essentiel et doit absolument être installé.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG
CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
CE MODULE DOIT ÊTRE INSTALLÉ PAR UN TECHNICIEN QUALIFIÉ, TOUTE
ERREUR DANS LES BRANCHEMENTS PEUT OCCASIONNER DES DOMMAGES
PERMANENTS AU VÉHICULE.
STATUT DE CAPOT : LE CONTACT DE CAPOT, DOIT ÊTRE INSTALLÉ SI LE VÉHICULE PEUT DÉMARRER À DISTANCE, LORSQUE LE CAPOT EST OUVERT, PROGRAMMEZ LA FONCTION A11 À NON.
A11 OFFNON
ADDENDUM - SUGGESTED WIRING CONFIGURATION ADDENDA - SCHÉMA DE BRANCHEMENT SUGGÉRÉ
ALL REV.: 20201221
Program bypass option:Programmez l’option du contournement:
UNIT OPTIONOPTION UNITE DESCRIPTION
D6 Push-to-StartPush-to-Start
Program bypass option:Programmez l’option du contournement:
UNIT OPTIONOPTION UNITE DESCRIPTION
C1OEM Remote status (Lock/Unlock) monitoringSuivi des status (Verrouillage/Déverrouil-lage) de la télécommande d’origine
IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:
SI LE VÉHICULE N’EST PAS ÉQUIPÉ D’UN CONTACT DE CAPOT FONCTIONNEL:
A11 OFFNON
Hood trigger (Output Status).
Contact de capot (état de sortie).
FIRMWARE VERSIONVERSION LOGICIELLE
To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool,
sold separately.Pour ajouter la version logicielle et les options,
utilisez l’outil FLASH LINK UPDATER ou FLASH LINK MOBILE, vendu séparément.
86.[05]BMW/Mercedes/Mini/Mitsubishi MINIMUM
Parts required (Not included) Pièce(s) requise(s) (Non incluse(s))
1X 10 AMP Fuse1X 15 AMP Fuse2X 6 AMP Diode
1X Fusible 10 AMP1X Fusible 15 AMP2X Diodes 6 AMP
Vehicle functions supported in this diagram (functional if equipped) | Fonc-tions du véhicule supportées dans ce diagramme (fonctionnelles si équipé)
VEHICLEVEHICULES
YEARS ANNÉES Im
mob
ilize
r byp
ass
Lock
Unl
ock
Arm
Dis
arm
Park
ing
Ligh
ts
Tach
omet
er
Doo
r Sta
tus
Trun
k S
tatu
s
Han
d-B
rake
Sta
tus
Foot
-Bra
ke S
tatu
s
OEM
Rem
ote
mon
itorin
g
MITSUBISHIOutlander Push-to-start (AT) 2014-2019 • • • • • • • • • • • •
PUSHSTART
GUIDE # 28911
Program bypass option(If equiped with OEM alarm):
Programmez l’option du contournement(Si équipé d’une alarme d’origine):
UNIT OPTIONOPTION UNITE DESCRIPTION
D2Unlock before / Lock after (Disarm OEM alarm)Déverrouille avant / Verrouille après (Désarme l’alarme d’origine)
Page 1 / 7
REGULAR INSTALLATION INSTALLATION RÉGULIÈRE
This guide may change without notice. See www.fortin.ca for latest version.Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version.
DESCRIPTION | DESCRIPTION
Fuse boxBoîte à fusibles
(+)START
(+) 12V
(+)TURNSIGNAL RIGHT
(+)TURNSIGNAL LEFT
(+) IGNITION
Harness in Driver kick panel, close to fire wallHarnais dans le panneau latéral côté conducteur, prêt du pare-feu
1 A1 A
1 F
1 F
1 D
1 D
1 E
1 B
2 3
1 C
1 E
(~) CAN1 LOW
(~) CAN1 HIGH
3
(~) CAN2 HIGH
(~) CAN2 LOW
2
Page 2 / 7
This guide may change without notice. See www.fortin.ca for latest version.Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version.
Yellow In A1Purple In A2
Purple/White In A3Green Out A4White Out A5
Orange In A6Orange/Black In A7
Dk.Blue In A8Red/Blue In A9
Lt.Blue/Black A10Black Out A11
Pink Out A12Yellow/Black In A13Brown/White Out A14
Pink/Black Out A15Purple/Yellow A16
Green/White A17Green/Red A18
White/Black A19Lt.Blue A20
C5 BrownC4 Gray/Black C3 GrayC2 Orange/BrownC1 Orange/Green
D6 White/RedD5 White/BlueD4 White/GreenD3 Yellow/RedD2 Yellow/BlueD1 Yellow/Green
A C
D
WIRING CONNECTION | GUIDE DE BRANCHEMENTS
CAN 1 LOWCAN 1 HIGHCAN 2 LOWCAN 2 HIGH
WITH | AVEC DATA-LINK:ALWAYS REQUIREDTOUJOURS REQUIS
NOT REQUIRED WITH DATALINKNON REQUIS EN DATA-LINK
B
REMOTESTARTER
DÉMARREURÀ DISTANCE
WITH | AVEC DATA-LINK:Direct connectionBranchement directe
HOOD PIN CONTACT CAPOT HOOD IN RS8 (-)
HAND BRAKE IN RS9 (-)
(+/-) IN RS12 TACHOMETER
FOOT BRAKE(+) IN RS13 GROUND OUT WHILE RUNNING (-) OUT RS14 TRUNK(-) IN RS15DOOR (-) IN RS16UNLOCK(-) OUT RS17LOCK(-) OUT RS18
A14
A12A11
A9
A8A5A4A3A2
Ground | Masse (-)RS112V BATTERYRS2 IN (+)
PARKING LIGHTSRS4 OUT (+)
IGNITIONRS6 IN/OUT (+)
STARTERRS7 OUT (+)
(-) Hand Brake
(-/+) Tachometer(+) Foot Brake
(+)Start(-) Ground While Running
(-) Trunk Status(-) Door Status
(-) Unlock(-) Lock
(+) Ignition
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11A12A13
A14
A15
A16
A17
A18
A19
A20
C5C4
C3
C2C1
D6D5
D4D3D2D1
A1
D1
D4
D5D6
C5
A20
A19
A18
A17
A16
A15
A13
A10
A7
A6
OU
TLA
ND
ER
10 AmpFuse
6A D
iode
6A D
iode
RS4
RS2/D3RS6/A1
15 AmpFuse
(+)Start(+)12V
D2
D3
A1
(+)START
PurpleMauve
(+) IGNITION
Brown/RedBrun/Rouge
(+) 12V
RedRouge
connector Back view Black 2-pin connector
Connecteur Noir -pins Vue de dos
Fuse box Boîte à fusibles
Back view White 13-pin connector
Connecteur Blanc 13-pins Vue de dos
Back view White 13-pin connector
Connecteur Blanc 13-pins Vue de dos
1
1
2
2
3
4 5 6 7 8
(+)TURNSIGNAL RIGHTPurpleMauve
(+)TURNSIGNAL LEFTPinkRose
connector Back view White 8-pin connector
Connecteur Blanc 8-pins Vue de dos
C3
1 2 3 5 6 7 8 9 10
12 13 14 16 17 18 19 20 21
4
1510
4 5
6 7 8 9 131211
1 2 3
10
4 5
6 7 8 9 131211
1 2 3
(~) CAN1 LOW
(~) CAN1HIGH
C4
White/BlueBlanc/Bleu
Black/YellowNoir/Jaune
2 3 5 6 7 8 9 10
13 14 16 17 18 19 20 21
4
15
11
22
Harness in Driver kick panel, close to fire
wall, 22-pin connector, cover with black electric
tape - Back view
Harnais dans le panneau latéral côté conducteur, prêt du pare-feu, connecteur
de 22 pins, recouvert de ruban electrique noir -
Vue de dos
Harness in Driver kick panel, close to fire
wall, 22-pin connector, covered with black
electric tape - Back view
Harnais dans le panneau latéral côté conducteur, prêt du pare-feu, connecteur
de 22 pins, recouvert de ruban electrique noir -
Vue de dos
12
1
1 A
A
1 B
B
1 F
F
1 2
2
3
3
D
D
(~) CAN2LOW
(~) CAN2 HIGH
C1 C2
Yellow/PinkJaune/Rose
Red/WhiteRouge/Blanc
11
22
Page 3 / 7
This guide may change without notice. See www.fortin.ca for latest version.Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version.
DCRYPTOR PROGRAMMING PROCEDURE | PROCÉDURE DE PROGRAMMATION AVEC DCRYPTOR
Parts required (not included) Pièces requises (non incluses)
1x FLASH LINK UPDATER,
1x FLASH LINK MANAGER
1x FLASH LINK MOBILE1x FLASH LINK MOBILE APP
SOFTWARE | PROGRAMME Smartphone Android or iOS with Internet connection (Internet provider charges may apply)Téléphone Intelligent Android ou iOS avec connection Internet (des frais du fournisseur Internet peuvent s’appliquer)
OROU
Microsoft Windows Computer with Internet connectionOrdinateur Microsoft Windows avec connection Internet1x 1x
BEFORE PROGRAMMING SET THE UNIT OPTIONS AND SAVE. | AVANT LA PROGRAMMATION CONFIGURER LES OPTIONS DE L'UNITÉ ET SAUVEGARDER.
willturn off.The BLUE LED
s'éteint.La DEL BLEUE
The BLUE LED will flash rapidly.
The RED and YELLOW LEDs will alternated.
La DEL BLEUE clignotera rapidement.
La DEL ROUGE et JAUNE alternent.
11
The Blue, Red, Yellow and Blue & Red LEDs will alternatively illuminate.
Les DELs Bleue, Rouge, Jaune et Bleue & Rouge illumineront alternativement.
2
3
4
5
Connect the required remaining harnesses.
Branchez les harnais requis restants.
Release the programming button when the Blue LED is ON.
Relâchez le bouton de program-mation quand la DEL Bleue est allumée.
CONTINUED NEXT PAGE | CONTINUEZ À LA PAGE SUIVANTE
Press the Push-to-Startbutton once to turn off theignition.
Appuyez 1 fois sur lebouton démarrage (Push-to-Start) pour éteindrel'ignition.
Do not press the brake pedal. Press the Push-to-Start button twice to turn ON the ignition.
Ne pas appuyer sur la pédale de frein. Appuyez 2 fois sur le bouton démarrage (Push-to-Start) pour allumer l'ignition.
OFF
IGN ON
x2PRESS
x1PRESS
x1HOLD
Press and hold the programming button: Connect the 4-PIN Data-link harness (Black connector).
Appuyez et maintenir le bouton de programmation enfoncé: Branchez le harnais Data-Link à 4-Broches (connecteur Noir)
If the LED are not solid BLUE disconnect the 4-PIN Data-link harness (Black connector) and go back to step1.
Si la DEL Bleue n’est pas allumée, débranchez le harnais Data-Link à 4-Broches (connecteur Noir) et retournez au début de l'étape 1.
LED may di�er depending on the module casing.L’apparence des DELS peuvent di�érer selon le boîtier du module.
RELEASE
ON BLUEBLEU
IGNITION ON IGNITION OFF
OFF
ALTERNATE
FLASHRAPIDLY
FLASH
Page 4 / 7
This guide may change without notice. See www.fortin.ca for latest version.Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version.
KEY BYPASS PROGRAMMING PROCEDURE 2/2 | PROCÉDURE DE PROGRAMMATION CONTOURNEMENT DE CLÉ 2/2
EVO-ALL
Disconnect all the connectors and after the Data-Link (4-pins) connector.
Débranchez tous les connecteurs et ensuite le connecteur Data-Link (4-pins).
*Pièces requises (non incluses)
Use the tool: FLASH LINK UPDATER or FLASH LINK MOBILEto visit the DCryptor menu.
Utilisez l'outil: FLASH LINK UPDATER ou FLASH LINK MOBILEpour visiter le menu DCryptor.
*Parts required (not included)
FLASH LINK UPDATER*
FLASH LINK MOBILE*
FLASH LINK MANAGER*SOFTWARE | PROGRAMME
Microsoft Windows Computer with Internet connection*
Ordinateur Microsoft Windows avec connection Internet*
VEHICLE'S OBDII CONNECTOR
CONNECTEUR OBDII DU VÉHICULE
OROU
Smartphone* (Internet provider chargesmay apply)Téléphone Intelligent* (des frais du fournisseurInternet peuvent s’appliquer)
REMOTE STARTER / ALARM VERIFICATION PROCEDURE | PROCÉDURE DE VÉRIFICATION DU DÉMARREUR À DISTANCE / ALARMETest the remote starter. Remote start the vehicle.Testez le démarreur à distance. Démarrez le véhicule à distance.
The module is now programmed.Le module est programmé.
AFTER DCRYPTOR PROGRAMMING COMPLETEDGo back to the vehicle and reconnect the 4-Pin (Data-Link) connector and after, all the remaining connector.
APRÈS LA PROCÉDURE DE PROGRAMMATION DCRYPTOR COMPLETÉE : retournez au véhicule etrebranchez le connecteur 4-pins (Data-Link) et après, tous les connecteurs du EVO-ALL.
EVO-ALL
6
7
8
Page 5 / 7
Remote start the vehicle.
Démarrez à distance.
Enter the vehicle with the Smart-Key.
Entrez dans le véhicule avec la clé intelligente (Smart-
Key) sur vous
The vehicle can now be put in to gear
and driven.
Vous êtes maintenant prêt à
embrayer et prendre la route.
START
Press the Push-to-Start button twice to turn ON the ignition.
Appuyez 2 fois sur le bouton démarrage (Push-to-Start) pour
allumer l'ignition.
ON xx22
REMOTE STARTER FUNCTIONNALITY | FONCTIONNALITÉS DU DÉMARREUR À DISTANCE
This guide may change without notice. See www.fortin.ca for latest version.Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version.
REMOTE STARTER FUNCTIONALITY | FONCTIONNALITÉS DU DÉMARREUR À DISTANCEPage 6 / 7
ALL
Service No : 000 102 04 2536
Date: xx-xx
INTERFACE MODULE
Made in CanadaPATENTS PENDING US: 2007-228827-A1
www.fortinbypass.com
HARDWARE VERSION FIRMWARE VERSION
Module label | Étiquette sur le module
Notice: Updated Firmware and Installation GuidesUpdated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.
Notice: Mise à jour microprogramme et Guides d’installationsDes mises à jour du Firmware (microprogramme) et des guides d’installation sont mis en ligne régulièrement. Vérifi ez que vous avez bien la dernière version logiciel et le dernier guide d’installation avant l’installation de ce produit.
WARNINGThe information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.
MISE EN GARDE L’information de ce guide est fournie sur la base de représentation (telle quelle) sans aucune garantie de précision et d’exactitude. Il est de la seule responsabilité de l’installateur de vérifi er tous les fi ls et circuits avant d’effectuer les connexions. Seuls une sonde logique ou un multimètre digital doivent être utilisés. FORTIN SYSTÈMES ÉLECTRONIQUES n’assume aucune responsabilité de l’exactitude de l’information fournie. L’installation (dans chaque cas) est la responsabilité de l’installateur effectuant le travail. FORTIN SYSTÈMES ÉLECTRONIQUES n’assume aucune responsabilité suite à l’installation, que celle-ci soit bonne, mauvaise ou de n’importe autre type. Ni le manufacturier, ni le distributeur ne se considèrent responsables des dommages causés ou ayant pu être causés, indirectement ou directement, par ce module, excepté le remplacement de ce module en cas de défectuosité de fabrication. Ce module doit être installé par un technicien qualifi é. L’information fournie dans ce guide est une suggestion. Ce guide d’instruction peut faire l’objet de changement sans préavis. Consultez le www.fortinbypass.com pour voir la plus récente version.
Copyright © 2006-2018, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING
TECH SUPPORTTél: 514-255-HELP (4357) 1-877-336-7797
ADDENDUM GUIDEWEB UPDATE | MISE À JOUR INTERNET
www.fortinbypass.com
EVO-ALL
Page 7 / 7