puducherry schedule of rates - :: pwdpwd.puducherry.gov.in/document/psr_karaikal_2011-12.pdf ·...

GOVERNMENT OF PUDUCHERRY

PUBLIC WORKS DEPARTMENT

High Level Bridge, Soriankuppam

PUDUCHERRY SCHEDULE OF RATES

2011 - 2012

KARAIKAL REGION

GOVERNMENT OF PUDUCHERRY

PUBLIC WORKS DEPARTMENT

PUDUCHERRY SCHEDULE OF

RATES

2011-2012

KARAIKAL REGION

PREFACE

1. Puducherry Schedule of Rates 2011-12 are updated edition of the PSR 2010-11.

2. The Puducherry Schedule of Rates 2011-12 incorporates all the items included in the PSR

2010-11 and correction slip issued from time to time besides new items. The specifications of the

items have been upgraded to the latest CPWD specification 2007. The Schedule of Rates is

based on the current market rates for materials and labour. The basic rates have been

obtained from Department of Economics & Statistics, all the Circles, Divisions, Builders

Association of India and from the leading manufacturers for branded products, local market

and DGS&D rates and the same have been finalized in the PSR meeting. The finished rates were

arrived by using CPWD analysis of rates 2007 and finalized by convening the PSR Standing

Committee meeting on 27/06/2011 as per O.M.No. 4090/669/06-PW (B1) dt: 12/01/2007.

3. The Standing Committee of Schedule of Rate was framed under the Chairmanship of

Thiru S. MANOHAR, Chief Engineer of Public Works Department, Puducherry, with the following

members.

TVL:

S. Manohar Chief Engineer, PWD Chairperson

S. Manohar Superintending Engineer - Circle-I, PWD Member

N. Manthaiyan Superintending Engineer - Circle-II, PWD Member

V. Kanagaraj Superintending Engineer Circle-III, PWD

Member

S. Vaittianadane Director of Economics & Statistics Member

S. Alphonse Under Secretary (Works)

Member

P. Arivazhagan Executive Engineer (Planning) - Central office Member

J. Jayakumar Executive Engineer - Public Health, PWD

Member

V. Sathiamurthy Executive Engineer Irrigation, PWD Member

Thiru R. Sanjeevi Senior Accounts Officer, PWD Member

P. Arivazhagan Executive Engineer Designs (in-Charge), PWD Member Secretary

4. The PSR Standing Committee meeting was convened on 27/06/2011 Puducherry Region

and finalized the basic rates of materials and labourers In the presence of all the Executive

Engineers, contractors, members of Builders Association of India and PWD Registered

Contractors Association, Puducherry.

5. The Delhi Schedule of Rates 2007 has been taken as a reference for inclusion of new

materials in respect of building works. Finished rates for building works have been adopted as

per the CPWD analysis of rates 2007. The specifications and analysis for the items under bridge

works are based on the Ministry of Road Transport and Highways (MORTH & MOST). Labour rates

and material rates have been finalized for the regions namely Puducherry, Karaikal and Mahe

and exclusive Schedule of Rates has been brought out separately for each region.

6. The rates and specifications incorporated in the PSR 2011-12 will become effective from

01/04/2011.

7. For works which are in riverbed (for river over 20 metre widths only) add 10% extra on

labour, earthwork and conveyance of materials within the riverbed. This extra percentage

should not be allowed for the cost of materials.

8. Within the Central Jail Compound 10% extra and Sub-Jail compound 5% extra is allowed

over the rates of labour, rates of works involving labour and rates for conveyance of materials

for the portion inside the jail campus (i.e. for the distance within the Jail Compound).

9. The current rate contracts running contracts in existence have been adopted for

materials which are having rate contracts and running contracts.

10. Hire charges for plants, rates for materials, labourers and technical staff indicated in this

PSR are only to prepare the analysis of rates.

11. The works which are to be executed during night times due to heavy traffic during day

times and for various technical and administrative reasons and for major building works which

involves works during night times for continuity, will involve extra expenditure by way of making

arrangements of lighting and special transportation for working parties to odd hours. In the light

of the above nature, the Executive Engineers at their discretion may exercise their judgment

and cater for the additional cost to the maximum extent of 5%, keeping in view, the severities

and factors mentioned above. Support details for the extra cost based on actual site conditions

in specific cases will have to be provided with proper justification.

12. Suggestions from all sectors are invited for the improvement and refinement of this

schedule of rate.

SALIENT FEATURES OF PUDUCHERRY SCHEDULE OF RATES 2011-12

1.0 This Puducherry Schedule of Rates 2011-12 is the revised edition of Puducherry Schedule

of Rates 2010-11. But this PSR is totally based on the latest CPWD analysis of rates 2007.

2.0 This PSR 2011-12 incorporates items of PSR 2010-11 with all correction slips. The

nomenclature of many items has been improved by making it more generic and

comprehensive.

3.0 Efforts have been made to introduce items pertaining to execution of different works by

using various electrical and mechanical equipments i.e. excavators, tower cranes,

mobile cranes, mechanical platforms, batch mix plant, transit mixers and pumps, piling

rigs, pneumatic cutters, chisels, chippers, hammers etc. Built-in provision has been taken

in the analysis of rates for new construction technology/mechanisation.

4.0 Items of dry work using prefabricated materials and pre-finished elements are included

for speedier construction viz gypsum block walls, calcium silicate and non-asbestos

cement board partitions, pre-finished counter tops for kitchen and washbasins, pre-

moulded and pre-finished stone work in risers and treads of steps and window sills, dry

stone cladding, sub-frames for windows, use of chemical and mechanical fasteners,

laying of tiles in flooring and dado with polymer based adhesives etc.

5.0 The new items introduced in this PSR will have new code nos. as indicated in the list of

basic materials.

6.0 Generally, the basic rates of materials, incorporated in the schedule, are pertaining to

materials conforming to BIS standards/CPWD specifications/materials of best quality

available in the market.

7.0 Lump sum provision of labour / T&P is replaced with mechanisation inputs. Prominent

items incorporating mechanization are earthwork in excavation, RMC/ BMC, brick work

in superstructure above floor-V level, road work, dismantling of RCC work, dismantling of

CC and flexible pavements, pile work etc.

8.0 Sub head wise salient features are as follows:

8.1 Earth work: Items of earth work in excavation in soils, ordinary rocks and hard

rocks by manual means have been modified to manual or mechanical means

and component of mechanization is included with corresponding reduction in

labour component.

8.2 Mortars: Items with lime mortar which are not in use now a days have been

deleted.

8.3 Concrete Work: Items of lime concrete which are not in use now a days are

deleted. Number of uses of steel and wooden shuttering reduced from 80 and

16 times to 40 and 8 times respectively, so that proper quality of shuttering is put

to use. In addition to this water proof plywood of 12mm thick centering with

spans and jacks have been newly introduced in this PSR.

8.4 Reinforced Cement Concrete: Minimum mix of RCC is kept as M25 instead of

M20 concrete, considering CPWD specifications, 2002 and IS:456:2000 for

durability of structures. New item of form work with 12mm water proof ply has

been included. Use of fly ash conforming to Grade-I of IS:3812 (pt.1):2003 has

been allowed in batch mix concrete and ready mixed concrete as part

replacement of OPC. Fly ash should be uniformly blended with cement in

accordance of Clause 5.2 & 5.2.1 of IS-456. Number of uses of steel and wooden

shuttering reduced from 80 and 16 times to 40 and 8 times respectively, so that

proper quality of shuttering is put to use. New item of applying decentring

chemical to the centering surfaces has also been included.

8.5 Brick Work: Items pertaining to brick work with lime mortar is deleted, since this

item is not in use now a days. Items of auto-claved aerated cement block

masonry, mechanized auto-claved fly-ash lime bricks & gypsum panel partitions

included. Fly-ash lime bricks are used upto plinth level of all building works and

compound wall structures. Also use of quarry dust filling in place of stand filling is

proposed to balance the on growing demand of sand for construction activities.

8.6 Stone Work: New items of stone work for providing and fixing dry cladding at all

heights with 40mm thick gang saw cut sand stone etc., and structural steel frame

work for stone cladding (to be paid in kg.) has been added. Items of stone

masonry in cement mortar with fine sand and with lime mortar are deleted.

8.7 Marble Work: Measurement for area of marble/granite stone flooring modified

to two groups of up to 0.50 sqm and over 0.50 sqm. Items of pre-moulded and

pre-polished flooring in treads/ risers of staircase, kitchen/ washbasin counters

and window sills have been provided.

8.8 Wood Work: In addition to the existing Burma teak wood and Padauk wood,

imported vengai wood has been included for Puducherry and Karaikal regions

alone. Flush door shutters, veneer boards etc., wherever not mentioned in the

items earlier, have been added now. Ordinary glass panes substituted with float

glass which is to be specified by thickness and not by weight. Items of bamboo

jaffery fencing, magnetic catcher in cup board, mortice lock, telescopic drawer

channel included. FRP flush & panelled doors & frames and FRP chajjas

included.

8.9 Steel Work: Steel glazed doors and windows fixed, side hung, top hung, centre

hung, composite units including mullion bar and steel beadings are clubbed

together and to be paid in Kg in one item instead of earlier being measured in

sqm. Nomenclature modified to specify Flash welding and Factory made steel

glazed doors and windows in item. Stainless steel handrail has been newly

introduced.

8.10 Flooring: Items pertaining to extra for brick flooring in specified pattern, 25mm

and 50mm thick CC flooring, flooring and skirting in red oxide and other items not

in frequent use deleted. Laying tiles in flooring and dado with polymer based

adhesives included. Many ceramic/vitrified companies such as Asian, NITCO,

Kajaria and RAK tiles for different sizes are followed in addition to the existing tiles

and also commercial quality tiles are introduced. Dazzle/ technic brands for

concrete based stones are included in addition to the existing Ultra/Eurocon

brands or equivalent for Karaikal region only.

8.11 Roofing: Non-asbestos cement sheet provided in place of asbestos cement

sheet roofing, items of corrugated GS sheet roofing-1.60mm thick and 1.25mm

thick deleted as theses are not readily available. 20mm thick wooden planks

ceiling, 18mm insulating board, 18mm flame retardant board on roofs deleted as

boards of these thicknesses are not readily available. Gypsum false ceiling,

Diakin mineral false ceiling tiles, aluminium composite panel works have been

included. Water proofing in terrace works and sunken floors have been

included. Colour coated roofing sheets has been included.

8.12 Finishing: Flush/ruled/struck/weathered pointing in brick work, tile work and stone

work clubbed. New item of 12mm thick gypsum plaster on brick/RCC surfaces

added. Items of plaster with lime deleted. Providing and mixing water proofing

material is to be paid in Kg per bag of cement instead of sqm.

8.13 Repair to Building: Making opening in brick masonry for doors, windows and

clerestory windows to be paid in sqm instead of being paid in numbers. Fixing

chowkhats in brick/RCC opening with mechanical/ chemical fasteners included.

Double scaffolding for repairs to building included. Items of wooden cleats,

safeda posts and hillock ballies deleted. Pointing with lime putty on brick/ tile

work deleted. Coal tarring on old work, floor painting with enamel paint, rubber

plug for sink/ wash basin etc., deleted. Ordinary glass panes changed to float

glass and thickness to be measured in mm. instead of weight.

8.14 Dismantling and Demolishing: New item of dismantling and demolishing by

pneumatic hammers, chisels, chippers etc., included.

8.15 Miscellaneous: UPVC windows has been additionally included.

8.16 Sanitary Installations: Items of long pan WC, CP brass trap and union, GI chain

with GI pull are not in use not a days and hence deleted. Relevant IS 1729 has

been mentioned with fittings of sand cast iron pipes. Fittings of centrifugally cast

iron pipes have been modified as Sand cast iron S&S as per IS:3989 from

existing Centrifugally cast (spun) iron S&S, as fittings are not manufactured by

centrifugal process.

8.17 Water supply: CPVC pipes included. Item of close hole basin mixer pillar tap has

been deleted and ASTM pipes have been included. Supreme pipe has been

included along with the existing Jain and Finolex pipes for the sizes of 50mm and

above diameter pipes only. All the other ISI brand pipes such as Nandi, Trubore,

Prince etc., are included along with the existing companies from 15mm dia to

75mm dia pipes. Likewise Jai Balaji, TATA Metaliks Kubota DI pipes has been

included in addition to JINDAL, LANCO, Electro steel and Electrotherm brands. It

was also suggested by the PSR committee to provide ASTM and CPVC pipes

instead of GI pipes for open and concealed plumbing pipes.

8.18 Drainage: Item of stone ware pipes Grade-A with mixture of cement mortar 1:3

for storm water drains deleted. P-traps of size 125 x 100 and 180 x 100 deleted.

Manholes of size 90 x 80 and 60cm deep deleted as items of 45 cm depth and

extra for depth beyond 45 cm are available. Circular manholes 0.91m dia, 1.6m

deep deleted as items of 0.91m depth and extra for depth are available.

Similarly, circular manholes 1.22m dia, 2.29m deep and circular manholes 1.52m

dia, 4.18m deep deleted. Brick masonry open surface drain deleted. Brick

masonry work, plaster and excavation etc., shall be measured as per actual.

Item of Grease trap deleted as not executed now a days.

8.19 Pile Work: Mechanical equipments such as hydraulic piling rig, crane, bentonite

pump, vibrating pile driving hammer etc., have been introduced in place of

lump sum provisions. The labour coefficients have been reduced due to the

provisions made for mechanical equipments. Piles up to 1500mm dia have been

incorporated.

8.20 Aluminium Work: Powder coated and polyester powder coated aluminium

sections and Z sections included. Ordinary glass panes substituted with float

glass panes, MS adjustable hangers substituted with GI adjustable hangers for

false ceiling. Extra for providing anodic coating AC 25 instead of AC 15 on

aluminium sections included. Items of weather silicon sealant double glazed

hermetically sealed glazing added. Stainless steel adjustable friction window

stays for easy cleaning of glass on both sides from the room also included.

Aluminium sub-frame for windows and ventilators included. New items of tubular

handle bar with anodizing, powder coating and polyester powder coating, brass

lock for aluminium doors, aluminium window fasteners for windows, aluminium

round shape handles etc., included.

8.21 Horticulture & Landscaping: Rates of the items updated.

9.0 In Road Work (Morth) RBI GRADE 81 items are introduced for sub-grade course, sub-

base course and base course.

10.0 Due care has been taken to print the Schedule of Rates as correctly as possible. It is,

however, possible that some errors might have crept in. In case any error or omission is

noticed, it may be brought to the notice of the Executive Engineer, Computer Design

Centre, PWD, Puducherry.

11.0 Suggestions for improvement are welcome.

ACKNOWLEDGEMENT

The Schedule of Rates 2011-12 was finalized by the Standing Committee of Puducherry

Schedule of Rates under the Chairmanship of Thiru S.Manohar, Chief Engineer, PWD, Puducherry

and is gratefully acknowledged. Without the guidance and encouragement of whom, this work

would have not become a success.

The sincere efforts taken by the PSR Standing Committee of Puducherry comprising of

Thiru S.Manohar, Chief Engineer, Thiru N.Manthaiyan, Superintending Engineer (Circle-II), Thiru

V.Kanagaraj, Superintending Engineer (Circle-III), officials from the Director of Economics and

Statistics, Thiru S.Alphonse, Under Secretary (Works), Thiru P.Arivazhagan, Executive Engineer

(Designs), all other Committee Members and other staff of the Computer Design Centre, who

have put up sincere effort in bringing out this Schedule of Rates 2011-12 is acknowledged.

In this juncture the sincere efforts put forth by the committee members in bringing out this

Schedule of Rates are most acknowledgeable. Similarly the sincere efforts and strenuous work

done in compiling the new PSR 2011-12 through the computer software and based on the latest

CPWD analysis 2007 by the officials and staff of Computer Design Centre viz. Thiru S. SURESH,

Assistant Engineer, Tmt. M. Sarassou, Junior Engineer, Thiru T. Sivakoumar, Work Assistant,

Thiru R.Batmanabane, Work Assistant, Thiru K.Venkatachalapathy, Thiru S.Saravanakumar,

Thiru V.Thamizvel, Tmt. V.Veerasundari Rathna, Draughtsman and Ms. A.A.J.Jacintha,

Draughtsman are to be congratulated.

The encouragement, enthusiasm and involvement of all the Superintending Engineers,

Executive Engineers, Architect and all those who have directly and indirectly participated in

bringing out this Schedule of Rates are also acknowledged.

Sl. No Name of Sub-Head Page No.

BASIC RATE

1. Hire Charges of Plants 1

2. Labour 2

3. Materials For Building Work & Services 5

4. Hire Charges, Labour & Materials For Road Work 112

5. Hire Charges, Labour & Materials For Bridge Work 119

6. Carriage 123

BUILDING WORK

2. Earth Work 125

4. Concrete Work 138

5. Reinforced Concrete Work 146

6. Brick Work 160

7. Stone Work 169

8. Marble Work 183

9. Wood Work 187

10. Steel Work 234

11. Flooring 241

12. Roofing 264

13. Finishing 285

14. Repairs to Buildings 297

15. Dismantling & Demolishing 310

16. Miscellaneous Building Works 320

SERVICES

17. Sanitary Installations 327

18. Water Supply 352

19. Drainage 404

20. Pile Work 425

21. Aluminum Work 443

22. Water Proofing 451

23. Horticulture and Landscaping 460

30. Irrigation 466

31. Water Supply (Public Health) 475

C O N T E N T S

Sl. No Name of Sub-Head Page No.

32. Sewerage (Public Health) 650

33. Miscellaneous (Public Health) 681

34. OHT Works 696

35. Subsoil Exploration 698

ROAD WORK (MOST)

4. Granular Sub-Base 702

6. Bituminous Construction 703

7. Culverts 705 ROAD WORK (MORTH)

2. Site Clearance and Dismantling 710

3. Earth Work 719

4. Granular Sub-Base 726

5. Base and Bituminous Construction 741

6. Cement Concrete Pavement 748

8. Traffic Signs, Marking & Other Road Appurtenances 750

9. Pipe Culverts 760

10. Maintenance of Roads 761

11. Horticulture 763

12. RBI Grade 81 767

BRIDGE WORK (MORTH)

12. Foundation 769

13. Sub Structure 787

14. Super Structure 794

15. River Training & Protection Works 812

16. Repairs & Rehabilitation 814

CEMENT CONSUMPTION STATEMENT

1. Building Work 816

2. Road work (MOST) 949

3. Road work (MORTH) 952

4. Bridge Work 963

BITUMEN CONSUMPTION STATEMENT (MOST & MORTH)

1. Road Work 998

BASIC RATE

KARAIKAL REGION

BASIC RATES FOR BUILDINGS WORKS

Sl.No. Code No. Description Unit Rate in Rs.

HIRE CHARGES OF PLANTS

1 0002 Hire charges of Concrete Mixer 0.14 cubic metre Day 1400.00

2 0003 Hire charges of Diesel Road Roller - 8 to 10 tonne Day 3000.00

3 0004 Production cost of concrete by batch mix plant cum 260.00

4 0006 Hire charge of Spraying machine including electric charges Day 220.00

5 0009 Pumping charges of concrete including h/c of pump, piping work accessories etc.

cum 100.00

6 0010 H/C of derrick monkey rope day 675.00

7 0011 H/C of Pump set of capacity 4000 litres/ hour day 800.00

8 0012 Vibrator (Needle type 40mm) day 900.00

9 0013 Machine for rubbing of floors day 275.00

10 0015 Excavator(120) day 12400.00

11 0017 Hire and running charges of tipper day 3000.00

12 0018 Hire and running charges of loader day 5350.00

13 0019 Hand grinder for mirror polish day 100.00

14 0020 Hydraulic excavator(3D)with driver and fuel day 6600.00

15 0020A Crane hire charges including all operation MT 30.00

16 0024 Hire & running charges of hydraulic piling rig with power unit etc.incl.complete

day 28000.00

17 0025 Hire & running charges of light crane day 3500.00

18 0026 Hire & running charges of bentonite pump day 4000.00

19 0027 H/R charges of vibrating pile driving hammer complete power unit & accessories

day 28000.00

20 0028 H/R charges of crane 20 tonne capacity day 8000.00

21 0029 H/C for transit mixer cum 420.00

Karaikal Page 1


22 0029A H/C for transit mixer (beyond 10km lead) Cum 40.00

23 0037 Mobile crane day 3500.00

24 0038 Tractor with ripper attachment day 2840.00

25 0039 Tractor with trolley day 2640.00

26 0040 Air compressor 250 cfm with two leads for pneumatic cutters/hammers

day 2500.00

27 0041 Joint cutting machine with 2-3 blades day 800.00

28 Excavator(60) hour 770.00




Note:Above hire charges includes cost of services of operating staff and supply of lubricating oil and fuel charges

LABOUR

32 0100 Bandhani day 290.00

33 0101 Bhisti day 270.00

34 0102 Blacksmith 1st class day 325.00

35 0103 Blacksmith 2nd class day 300.00

36 0111 Carpenter 1st class day 420.00

37 0112 Carpenter 2nd class day 350.00

38 0113 Chowkidar day 275.00

39 0114 Beldar day 290.00

40 0114A Survey Assistant each 300.00

41 0114B Wooder I class each 300.00

42 0115 Coolie day 275.00

43 0116 Fitter (grade 1) day 450.00

Karaikal Page 2


44 0117 Assistant fitter or 2nd class fitter day 400.00

45 0119 Glazier day 400.00

46 0122 Mason (for plaster of paris work) 1st class day 450.00

47 0123 Mason (brick layer) 1st class day 420.00

48 0124 Mason (brick layer) 2nd class day 370.00

49 0125 Mason (for plain stone work) 2nd class) day 375.00

50 0126 Mason ( for ornamental stone work) 1 st class day 500.00

51 0127 Driver ( for Road roller, Concrete mixer , Truck etc.,) day 400.00

52 0128 Mate day 300.00

53 0130 Mistry day 300.00

54 0131 Painter day 400.00

55 0132 Rock Excavator day 350.00

56 0133 Rock Breaker day 300.00

57 0134 Rock driller day 300.00

58 0135 Stone Chiseller day 300.00

59 0139 Skilled Beldar ( for floor rubbing etc.,) day 280.00

60 0141 White washer day 325.00

61 0155 Mason (average) day 395.00

62 0156 Carpenter (average) day 385.00

63 0157 Operator (Pile / Special machine) day 350.00

64 0159 Skilled torch operator for laying tack day 350.00

65 0160 Electrician helper day 350.00

66 0163 Mehanic helper each 350.00

67 0193 Electrician class I (ITI passed with wireman licence from competent authority)

day 400.00

Karaikal Page 3


680191 Mazdoor category III day 250.00

690192 Painter Class II day 350.00

700158 Mechanic (Pile) day 350.00

710159 Electrician class II (ITI passed with licence from Elec.dept) day 350.00

720161 Mechanic Grade -I day 400.00

730162 Mechanic Grade -II day 350.00

740164 Pump driver Grade -I (ITI Passed) day 400.00

750165 Sewer Cleaner day 350.00

760166 Sweeper day 250.00

770167 Thatcher day 250.00

780168 Welder Class -I (ITI Passesd) day 350.00

790169 Welder Class -II day 300.00

800170 Well Sinker Class -I day 425.00

810171 Well Sinker Class -II day 325.00

820172 Technical Assitant Grade -I (B.E. Passed) day 600.00

830173 Technical Assitant Grade -II (Diploma passed or B.E. failed) day 550.00

840174 Technical Assitant Grade -III (ITI passed or Diploma failed) day 500.00

850175 Technical Assitant Grade -IV (ITI failed or having certificate issued by govt. of Puducherry) day 400.00

86 Data Entry Operator Gr.I (Degree with Computer / PGDCA or equivalent) day 550.00

870176 Laboratory Assistant Grade - I (PG in science) day 500.00

880177 Laboratory Assistant Grade - II (UG in science) day 450.00

890178

Laboratory Assistant Grade - III (Degree other than Engg / Science to work as work inspector,Graduate Junior clerk and work clerk)

day 400.00

900179 Raker day 250.00

910180 Driver - Light vehicle day 350.00

Karaikal Page 4


920181 Driver - Heavy vehicle (Lorry , Roller , Tracer) day 400.00

930194 Driver - Earth moving equipments day 430.00

940182 Cleaner (Heavy vehicles / Roller) day 250.00

950183 Watchman Grade -I (Kurkha) day 300.00

960184 Watchman Grade -II (Others) day 275.00

970185 Drum mixer (Rotary for hot process) day 250.00

980186 Helper for Rig day 250.00

990200A Driller Grade -I (Pile) day 425.00

1000200B Driller Grade -II (Pile) day 400.00

1010200C Mazdoor (Heavy for Pile work) day 400.00

1020200D Genset Operator day 275.00

1030200E Site supervisor for pile operation day 525.00

Note: These rates are at site of work and are exclusive of contractors profit , but includes octroi , royalty , sales tax extra

MATERIALS FOR BUILDING WORK

104 0222 Seam bolts and nuts 6mm dia and 25mm long 10nos 30.00

105 0223 Non - asbestos fibre cement corrugated sheet 6mm thick sqm 205.00

106 0224 Non - asbestos fibre cement close fitting adjustable ridge metre 203.00

107 0225 Non - asbestos fibre cement corrugate serrated adjustable ridge

metre 174.00

108 0226 Non - asbestos fibre cement plain wing adjustable ridge metre 188.00

109 0227 Non - asbestos fibre cement unserrated adjustable ridge for hips

metre 195.00

110 0228 Non - asbestos fibre cement corrugated apron piece metre 126.00

111 0229 Non - asbestos fibre cement eaves filler piece each 93.00

112 0230 Non - asbestos fibre cement north light curves meter 197.00

113 0231 Non - asbestos fibre cement ventilator curves each 267.00

Karaikal Page 5


114 0232 Non - asbestos fibre cement barge boards metre 232.00

115 0233 Non - asbestos fibre cement ridge finial pair 84.00

116 0234 Non - asbestos fibre cement special north light curves each 275.00

117 0235 Non - asbestos fibre cement S type louvers each 161.00

118 0236 Non - asbestos multi purpose fibre cement board 6mm thick sqm 180.00

119 0237 Non - asbestos multi purpose fibre cement board 8mm thick sqm 239.00

120 0285 Brick aggregate (Single size) : 63 mm nominal size cum 550.00



123 0288 Brick aggregate (Single size) : 20 mm nominal size Cum 475.00

124 0289 Brick aggregate (single size) : 25mm nominal size cum 475.00

125 0291 Stone aggregate (Single size) : 63 mm nominal size cum 1200.00





130 0296 Stone aggregate (Single size) : 12.5 mm nominal size cum 1300.00



133 0300A Casurina posts 80mm dia metre 41.25

134 0300B Casurina posts 100mm dia metre 52.50

135 0300C Casurina posts 125mm dia metre 58.75

136 0302 Safeda ballies 125 mm diameter metre 58.75

137 0302A Casurina posts 100 to 130mm dia metre 56.25

Karaikal Page 6


138 0302B Casurina posts 150 mm dia metre 97.50

139 0304 Bajri cum 370.00

140 0305 Bamboo 25mm dia 2.5 metre long score 192.00

141 0308 Bhusa quintal 200.00

142 0309 Paving bitumen S-90 of approved quality tonne 37360.04

143 0310 Bitumen emulsion tonne 34944.17

144 0313 Blown type petroleum bitumen of penetration 85/25 of approved quality

tonne 37360.04

145 0314 Bitumen hot sealing compound : grade A Kg 37.36

146 0316 Bitumen solution primer of approved quality litre 34.94

147 0318 Bitumen felt fibre (Vegetable or animal) : type 2 grade 1 sqm 50.00

148 0322 Biutmen felt : type 3 grade 1 sqm 50.00

149 0324 Coal tar litre 34.94

150 0325 Blasting Powder kg 30.00

151 0326 Blasting fuse (fuse wire) each 12.00

152 0328 White face insulating board :12 mm thick sqm 240.00

153 0332 Natural colour insulating board : 12mm thick sqm 180.00

154 0336 Flame retardent face insulating sqm 210.00

155 0339 Flame retardant face insulating,impregnated fibre board 12 mm thick

sqm 320.00

156 0341 Flat pressed 3 layer particle board (medium density) grade 1-12 mm thick

sqm 290.00

157 0346 Extra veneerede particle board :Teak veneeringononeside & commercialon other

sqm 270.00

158 0347 Extra for veneered particle board with : Commercial veneering on both sides

sqm 100.00

159 0348 Extra for veneered particle board with: Teak veneering on both sides

sqm 460.00

160 0362 Brick bats cum 500.00

161 0367 Portland cement (OPC / PPC - Average) tonne 6000.00

Karaikal Page 7


162 0367A Cement (SRPC) tonne 6500.00

163 0368 White cement tonne 17000.00

164 0370 Coal (steam) quintal 1050.00

165 0373 Cramp Gun metal 25x 6x300 mm each 55.00

166 0378 Brass butt hinges (light / ordinarytrype)125x70x4mm 10nos 1113.00

167 0379 Brass butt hinges (light / ordinarytype) 100x70x4mm 10nos 750.00

168 0380 Brass butt hinges (light / ordinarytype) 75x40x2.5mm 10nos 375.00

169 0381 Brass butt hinges (light / ordinarytype)50x40x2.5mm 10nos 223.00

170 0382 Brass butt hinges (heavy type) 125x85x5.5mm (.70kg) 10nos 1813.00

171 0383 Brass butt hinges (heavy type) 100x85x5.5mm (.56kg) 10nos 1638.00

172 0384 Brass butt hinges (heavy type)75x65x4.0mm (.20kg) 10nos 825.00

173 0385 Brass parliamentary hinges 150x125x27x5mm 10nos 2525.00



176 0388 Brass parliamentary hinges 75X100X20X3.2mm 10nos 1813.00

177 0389 Brass single acting spring hinges 150 mm each 260.00



180 0392 Brass double acting spring hinges 150 mm each 424.00



183 0400 Brass tower bolt (barrel type) 250x10 mm each 268.00



Karaikal Page 8



187 0404 Brass flush bolt 250 mm each 158.00



190 0408 Brass handles 125 mm with plate 175x32 mm each 166.00



193 0411 Brass door latch 300x16x5 mm (0.380 kg) each 211.00

194 0412 Brass door latch 250x16x5 mm (0.350 kg) each 189.00

195 0413 Brass mortice latch and lock 100x65 6levers pair of brass lever handles

each 794.00

196 0414 Brass mortice latch and lock 100x65mm pair of brass lever handles

each 675.00

197 0415 65mm Godrej Navtal locks - 6 levers each 300.00

198 0417 Brass 150 mm floor door stopper (0.357kg) each 194.00

199 0418 Brass hard drawn hooks and eyes 300 mm 10 Nos 600.00





204 0423 Brass casement window fastener each 52.00

205 0424 Brass casement stays (straight peg type) 300mm weighing not less than 0.33kg

each 113.00


each 96.00


each 83.00

208 0427 Brass quadrant stays 300 mm each 96.00

209 0428 Brass fanlight catch 10 nos 344.00

Karaikal Page 9


210 0429 Brass fan light pivot 10 nos 463.00

211 0430 Brass chain with hook for fan light catch each 38.00

212 0431 Brass hasps and staples (safety type) 150mm 10 Nos 750.00



215 0438 Brass night latch each 756.00

216 0442 Brass helical spring 150mm each 227.00

217 0444 Brass curtain rod 20mm dia 1.25mm thick metre 135.00

218 0445 Brass curtain rod 25mm dia 1.25mm thick metre 181.00

219 0446 Brass brackets (curtain rods ) 20mm each 44.00

220 0447 Brass cupboard knob or ward robe knob 50 mm each 38.00

221 0449 Brass screws 50 mm 100 Nos 338.00





226 0524 Chromium plated brass butt hinges (heavy) type 75x65x4mm (200gms)

10 Nos 825.00

227 0525 Chromium plated brass butt hinges (light / ordinary) type 125x70x4mm

10 Nos 908.00

228 0526 Chromium plated brass butt hinges (light / ordinary) type 100x70x4mm

10 Nos 756.00

229 0527 Chromium plated brass butt hinges (light / ordinary) type 75x40x2.5mm

10 Nos 371.00

230 0528 Chromium plated brass butt hinges (light / ordinary) type 50x40x2.5mm

10 Nos 303.00

231 0555 Chromium plated brass handles 125mm with plate 175 x 32 mm

each 227.00

232 0556 Chromium plated brass handles 100mm with plate 150 x 32 mm

each 188.00

233 0557 Chromium plated brass handles 75 mm with plate 125x32 mm each 142.00

Karaikal Page 10


234 0558 Chr. plated brass mortice latch&lock100x65mm with6levers&apair brasslever handle

each 713.00

235 0568 Chr. plated brass casement window fastener each 90.00

236 0569 Chr. plated brass casement stays(st.peg type)300mm weighing not less than 0.33kg

each 144.00


each 126.00


each 106.00

239 0583 Chromium plated Brass night latch each 614.00

240 0584 Chromium plated Brass Wardrobe knob 50mm each 44.00

241 0585 Chromium plated Brass screws 50mm 100nos 288.00





246 0590 Chromium plated brass curtain rod 12mm dia 1.25mm thick metre 166.00



249 0594 Bright finished or black enameled MS butt hinges 125x65x2.12mm

10nos 144.00

250 0595 Bright finished or black enameled MS butt hinges 100x58x1.90mm

10nos 114.00

251 0596 Bright finished or black enameled MS butt hinges 75x47x1.70mmm

10nos 78.00

252 0597 Bright finished or black enameled MS butt hinges 50x37x1.50mmm

10nos 60.00

253 0608 Nickel plated MS piano hinges 1mm tk35mm wide metre 29.00

254 0635 Bright finished or black enameled MS screws 50mm 100 Nos 66.00

255 0637 Bright finished or black enameled MS screws 40mm 100Nos 46.00

256 0638 Bright finished or black enameled MS screws 30mm 100 nos 38.00

257 0639 Bright finished or black enameled MS screws 25mm 100 nos 30.00

Karaikal Page 11


258 0640 Bright finished or black enameled MS screws 20mm

0

100 nos 23.00

259 0641 Bright finished or black enameled MS bolts&nuts 50x6mm each 6.00

260 0641R Bright finished or black enamaled powder coating bolts and nuts 50x6mm

each 8.00

261 0642 Oxidised MS butt hinges 125x65x2.12mm 10nos 216.00

262 0642R Powder coating butt hinges125x65x2.12mm 10nos 300.00

263 0643 Butt hinges 100x58x1.90mm 10nos 156.00

264 0643R Powder coating butt hinges100x58x1.9mm 10nos 192.00



267 0645R Powder coating butt hinges 50x37x1.50mm 10nos 96.00

268 0646 Oxidised MS parliamentary hinges150x125x27x2.8mm 10nos 480.00

269 0646R Powder coating parliamentary hinges 150x125x27x2.8mm 10nos 1440.00

270 0647 Powder coating parliamentary hinges125x125x27x2.8mm 10nos 372.00


272 0648 Oxidised ms parliamentary hinges100x125x27x2.8mm 10nos 360.00


274 0649 Oxidised ms parliamentary hinges75x100x20x2.24mm 10nos 300.00


276 0650 Oxidised ms single acting spring hinges 150 mm each 90.00

277 0650R Powder coating single spring hinges 150mm each 252.00


279 0651R Powder coating ms single spring hinges 125mm each 216.00


281 0652R Powder coating single acting spring hinges 100mm each 162.00

Karaikal Page 12


282 0653 Oxidised ms double acting spring hinges 150 mm each 95.00

283 0653R Powder coating double acting spring hinges 150mm each 252.00





288 0656 Nickel plated ms piano hinges 1mm tk35mmwide metre 49.00

289 0660 Oxidised ms sliding door bolt 300x16mm each 76.00

290 0660R Powder coating sliding door bolt 300x16 mm each 180.00

291 0661 Oxidised ms sliding door bolt 250x16mm each 56.00

292 0661R Powder coating sliding door bolt 250x16 mm each 144.00

293 0662 Oxidised ms door latch 300x20x6mm each 42.00

294 0662R Powder coating door latch 300x20x6mm each 120.00

295 0663 Oxidised ms door latch 250x20x6mm each 36.00

296 0663R Powder coating latch 250x20x6mm each 108.00

297 0664 Oxidised mild steel tower bolt (barrel type) 250X10mm each 50.00

298 0664R Powder coating tower bolt(barrel type) 250x10 mm each 60.00


300 0665R Powder coating tower bolt (barrel type) 200x10mm each 51.00


302 0666R Powder coating tower bolt (barrel type)150x10mm each 42.00


304 0667R Powder coating tower bolt (barrel type) 100x10mm each 36.00

305 0668 Oxidised mild steel handles 125 mm each 29.00

Karaikal Page 13


306 0668R Powder coating handles 125mm each 90.00


308 0669R Powder coating handles100mm each 66.00


310 0670R Powder coating handles 75mm each 47.00

311 0679 Oxidised MS hasps and staples (safety type) 150 mm 10 nos 216.00

312 0679R Powder coating hasps and staples (safety type) 150mm 10nos 60.00


314 0680R Powder coating hasps and staples (safety type)115mm 10nos 54.00


316 0681R Powder coating hasps and staples (safety type)90mm 10nos 47.00

317 0682 Oxidised MS screws 50mm 100nos 72.00

318 0682R Powder coating screws 50mm 100nos 144.00

319 0683 Screws 40mm 100nos 61.00








327 0687 Anodised aluminium butt hinges 125x75x4mm 10nos 792.00



Karaikal Page 14


330 0690 Anodised aluminium butt hinges 100x63x3.2mm 10nos 570.00





335 0696 Anodised aluminium sliding door bolt 300x16mm each 238.00

336 0697 Anodised aluminium sliding door bolt 250x16mm each 217.00

337 0698 Anodised aluminium tower bolt (barrel type)300x10mm 10nos 1008.00

338 0699 Anodised aluminium tower bolt (barrel type) 250x10mm 10nos 936.00




342 0703 Anodised aluminium handles125mm with plate 175 x 32mm 10nos 498.00

343 0704 Anodised aluminium handles100mm with plate 150 x 32mm 10nos 432.00

344 0705 Anodised aluminium handles 75mm with plate 125 x 32mm 10nos 363.00

345 0706 Anodised aluminium handles 50 cm long 100x3.15mm each 150.00

346 0713 Block board construction flush door with teak wood ply on both faces 35mm tk

sqm 1800.00


sqm 1600.00


sqm 1500.00

349 0717 Block board construction flush door with commercial ply on both faces 35mm tk

sqm 1300.00


sqm 1250.00


sqm 1180.00

352 0723E P/F 20mm thick PVC shutter for doors, windows, cup board etc sqm 2450.00

353 0723F P/F PVC false roofing with Sintex PVC Section sqm 1200.00

Karaikal Page 15


354 0724 S/F Precast RCC door and window frames sqm 850.00

355 0752 Block board construction flush door lipping sqm-door area

350.00

356 0753 Square vision panel in block board construction flush door sqm-door area

110.00

357 0754 Circular vision panel in block board construction flush door sqm-door area

105.00

358 0755 Decorative type louvers in block board construction flush door sqm-door area

190.00

359 0757 Rebate cutting in block board construction flush door sqm-door area

45.00

360 0759 Decorative plywood 4 mm sqm 550.00

361 0761 Fuel wood quintal 240.00

362 0763 Glue kg 80.00

363 0768 Cement concrete Jali 50mm tk sqm 375.00

364 0769 Cement concrete Jali 40mm tk sqm 320.00

365 0770 Cement concrete jali 25mm tk sqm 225.00

366 0771 Kerosene oil litre 25.00

367 0773 Unslaked lime quintal 350.00

368 0775 White lime quintal 550.00

369 0776 Lime quintal 270.00

370 0777 Dry hydrated lime (factory made) quintal 1000.00

371 0784 Marble dust / powder cum 1650.00

372 0785 Marble chips up to 4mm and downsize white&black quintal 125.00

373 0788 Marble chips large size above 4mm white&black quital 125.00

374 0810 Moorum cum 750.00

375 0810A Gravel cum 750.00

376 0811 Mud (dry) cum 15.00

377 0815 Dry distemper kg 55.00

Karaikal Page 16


378 0816 Oil bound washable distemper / Acrylic distemper kg 70.00

379 0818 Linseed oil (double boiled) litre 200.00

380 0820 Cement primer litre 120.00

381 0821 Distemper primer litre 120.00

382 0823 Pink primer (for wood) litre 120.00

383 0826 Aluminium paint litre 215.00

384 0827 Acid proof paint (chocolate or black) litre 245.00

385 0828 Anticorrosive bituminous paint (black) litre 140.00

386 0828A Black board paint litre 163.00

387 0829 Black japan paint litre 95.00

388 0830 Enamel paint litre 175.00

389 0831 Floor enamel paint in all shades except green litre 175.00

390 0833 Synthetic enamel paint in black or chocolate shade litre 175.00

391 0834 Synthetic enamel paint in all shades except black or chocolate shade

litre 175.00

392 0835 Plastic emulsion paint litre 220.00

393 0835A Plastic emulsion paint (royal) litre 325.00

394 0835B Plastic emulsion paint (premium) litre 270.00

395 0835C Plastic emulsion paint (commercial) litre 220.00

396 0840 Paints - Ready mixed for steel work in white litre 170.00

397 0842 Paints - Ready mixed for wood work litre 170.00

398 0845 Roofing paint for iron sheets in red colour litre 175.00

399 0846 Set release of Don & Rebol emulsion Fosroc - mixed with 5litres of water

litre 195.00

400 0850 White lead kg 75.00

401 0851 Water proofing cement paint kg 50.00

Karaikal Page 17


402 0855 Wax polish (ready made) kg 250.00

403 0856 Ordinary varnish litre 130.00

404 0857 Superior copal varnish litre 150.00

405 0858 Superior spar varnish litre 155.00

406 0859 Oil type wood preservative litre 110.00

407 0863 Putty for wood work kg 50.00

408 0865 Pig lead kg 150.00

409 0868 Premixed super white gypsum plaster kg 15.00

410 0869 Plaster of paris kg 15.00

411 0869A Ready made wall putty (JK / BIRLA ) kg 28.00

412 0870 Plug each 12.00

413 0873 Copper pins 6mm dia 7.5cm long each 15.00

414 0874 Black colour dark shade pigment kg 65.00

415 0875 Red,chocolate,orange,buff or yellow (red oxide of iron) light shade pigment

kg 100.00

416 0876 Green or blue medium shade pigment kg 90.00

417 0886 Standard holder bat clamps for sand cast iron or cast iron pipes 150 mm dia

each 32.00

418 0966 Sand cast iron plain shoe 150mm dia each 200.00

419 0967 Copper plate kg 200.00

420 0969 Pulley 25 mm dia each 18.00

421 0973 Rolling shutter made of 80x1.25mm machine rolled laths sqm 2050.00

422 0974 Top cover for rolling shutters metre 550.00

423 0975 27.5cm long wire spring grade no 2 for rolling shutters each 500.00

424 0976 Ball bearing for rolling shutters each 260.00

425 0977 Extra for chain & cranked rolling shutters-exceeding 10sqmupto16.80sqmareaofdoor

sqm 310.00

Karaikal Page 18


426 0978 Extra for chain & cranked rolling shutters-exceeding 16.80sqmarea of door

sqm 360.00

427 0979 Cost of earth cum 190.00

428 0979A Quary rubbish cum 500.00

429 0979B Earth for filling (Red earth) cum 400.00

430 0980 Cost of sludge cum 30.00

431 0982 Coarse sand (Zone III) cum 1050.00

432 0983 Fine sand (Zone IV) cum 1100.00

433 0992 Galvanised steel plain sheets quintal 5000.00

434 0992A P/F colour coated galvalume sheet of 550 M.P.A sqm 700.00

435 0993C P/S/F of netlon mesh using 25mm an.al.strip sqm 270.00

436 0994 Standard quality hard board sheet 3mm tk sqm 150.00

437 0996 Standard quality hard board sheet 4.5 mm tk sqm 170.00

438 0999 Shellac litre 215.00

439 1000 Spirit litre 30.00

440 1001 Spun yarn kg 75.00

441 1002 MS round bar 12mm dia and below quintal 4300.00

442 1003 MS round bar above 12mm dia quintal 4300.00

443 1004 Av. rate of MS round bar for reinforcements quintal 4300.00

444 1005 Twisted steel / deformed bars quintal 4300.00

445 1005A Steel-TMT (TISCON / VIZAG / IISCO /SAIL / JSW) quintal 4800.00

446 1005B Steel-TMT (ISI BRAND OF APPROVED MAKE) quintal 4300.00

447 1005C Anticorrosive coating for 20mm to 32mm dia bar tonne 8370.00

448 1005D Anticorrosive coating for 10mm to 16mm dia bar tonne 11790.00

449 1005F Surface preparation and application of two coat of Zinga sqm 1452.60

Karaikal Page 19


450 1005G Providing corrosion proof zinga coating 8mm - 32mm dia bars tonne 15000.00

451 1006 Mild steel square bars quintal 4800.00

452 1007 Structural steel such as tees,angles channels and R.S.joists quintal 4300.00

453 1008 Flats upto 10mm in thickness quintal 4300.00

454 1009 Flats exceeding 10mm in thickness quintal 4350.00

455 1010 Mild steel plates quintal 5100.00

456 1013 Mild steel sheets for tanks quintal 4000.00

457 1015 Mild steel expanded metal 20x60 mm strands sqm 270.00

458 1019 Mild steel hooks each 6.00

459 1020 Mild steel rivets quital 4600.00

460 1021 Hard drawn steel wire fabric sqm 370.00

461 1022 GS bolts & nuts 6mm dia & 25mm long round head with slots 10nos 11.00

462 1023 GS J or L hooks 8mm dia 10nos 50.00

463 1024 GS bolts & nuts 6mm dia & 125mm long round head with slots each 11.00

464 1025 MS bolts 6mm dia and 25mm long with hexagonal head 10nos 17.00

465 1028 Straining bolts each 40.00

466 1029 GS barbed wire quintal 6000.00

467 1030 GS turn buckles each 10.00

468 1031 GS bolts & nuts 10mm dia and 27cm long both sides threaded with 4GS nuts

each 13.00

469 1032 GS bolts 10mm dia & 7cmlongwith nuts each 9.00

470 1034 Bolts and nuts upto 300 mm in length quintal 5550.00

471 1035 Bolts and nuts above 300 mm in length quintal 5045.00

472 1036 Iron pintels including welded pin each 32.00

473 1037S AISI 316G 50mm S.S.pipe 10mtr or 32.5 or 25kgx400 LS 10000.00

Karaikal Page 20


474 1038S 25mm SS pipe 4 cross line 40mtr or 130' or 50kg x400 LS 20000.00

475 1039S Vertical 40mm x10mmx1mtr height 17no.or 55kg x400 LS 22000.00

476 1040S S.S Slant holes over vertical post, each 4 holes , total holes 68nox50.00

LS 3400.00

477 1041S S.S.Base plate of 100mmx100x9mm of each 1 kg,17 pipes or 17kgx300

LS 5100.00

478 1042S S.S.M9 holes over base plate, total 17 plates , 68 holes x40.00 LS 2720.00

479 1043S S.S. M8 Anchor fastener bolt & 60no x50.00 LS 3400.00

480 1044L For10mtr,charges cutting ,TIG welding, mirror polishing inclu.transportationet

LS 26650.00

481 10A UNLOADING-100mm dia metre 0.63

482 10B UNLOADING-125mm dia metre 0.84

483 10C UNLOADING-150mm dia metre 1.05

484 10D UNLOADING-200mm dia metre 1.70

485 10E UNLOADING-250mm dia metre 2.42

486 10F UNLOADING-300mm dia metre 2.99

487 10G UNLOADING-350mm dia metre 3.54

488 10H UNLOADING-400mm dia metre 5.71

489 10I UNLOADING-450 to 500mm dia metre 6.98

490 10J UNLOADING-600 to 1000mm dia metre 10.47

491 10K Unloading below 100mm dia metre 0.53

492 1143 Steel beading metre 38.00

493 1145 Aluminium plain strip edging 38x12x3mm metre 90.00

494 1149 Glass strip 4mm thick 40mm deep metre 6.50

495 1154 Through and bond stone 100nos 950.00

496 1157 Stone for masonry work cum 800.00

497 1157A Jetty stone / Armour stone / core stone MT 750.00

Karaikal Page 21


498 1158 Stone for pitching 15cm x22.5cm cum 1000.00

499 1159 Stone dust cum 500.00

500 1159A Spalls (5 to 50 kg) cum 300.00

501 1159B Charcoal powder kg 27.50

502 1160 Red sand stone block cum 4500.00

503 1161 White sand stone block cum 5000.00

504 1163 White sand stone slab 75mm tk (un-dressed) sqm 325.00

505 1164 Red sand stone slab 40mm thick (un-dressed) sqm 170.00

506 1165 White sand stone slab 40mm thick (un-dressed) sqm 270.00

507 1166 Red sand stone slab 45mm and 50 mm thick (un-dressed) sqm 150.00

508 1168 Kota stone slab 20mm to 25mm thick(semi-polished) sqm 425.00

509 1169 Kota stone slab 25mm thick (rough chiseled) sqm 475.00

510 1174 Red sand stone slab 45mm and 50mm thick(un-dressed) sqm 220.00

511 1175 White sand stone slab 45mm and 50mm thick(un-dressed) sqm 240.00

512 1177 Stone grit 6mm and down size or pea sized gravel cum 650.00

513 1179 Crushed stone 2.36mm to 12.5mm size cum 633.33

514 1182 Surkhi Cum 110.00

515 1187 First class teak wood in scantling 10cudm 492.00

516 1189 Second class teak wood in scantling 10cudm 394.00

517 1189B Teak wood in scantling (Burma) cum 165000.00

518 1190 Second class teak wood in planks 10cudm 410.00

519 1190B Teak wood in planks (Burma) cum 195000.00

520 1194 Second class deodar wood in planks 10cudm 335.00

521 1196 First class kail wood in planks 10cudm 186.00

Karaikal Page 22


522 1197 Second class kail wood in scantling 10cudm 160.00

523 1197P Country wood in scantling (Padak) cum 75000.00

524 1197V Country wood in scantling (Vengai) cum 70000.00

525 1198P Country wood in planks (Padak) cum 80000.00

526 1198V Country wood in planks(Vengai) cum 80000.00

527 1199 Sal wood 10cudm 218.00

528 1201 Precast terrazzo tiles 22mm thick(light shade) sqm 275.00

529 1202 Precast terrazzo tiles 22mm thick(medium shade) sqm 215.00

530 1203 Precast terrazzo tiles 22mm thick(dark shade) sqm 200.00

531 1203A Cement concrete flooring tiles 22mm tk -(Endura/Ultra/Dazzle/Technic or equivalent)

sqm 400.00

532 1207 G.I.limpet washer 100nos 29.00

533 1208 Bitumen washer 100nos 23.00

534 1209 G.I.plain washer thick 100nos 35.00

535 1210 G.I.plain washer thin 100nos 30.00

536 1211 G.I.plain washer for seam bolts 100nos 21.00

537 1213 Water proofing materials kg 30.00

538 1214 Welding by gas plant cm 0.80

539 1215 Welding by electric plant cm 0.62

540 1216 Whiting quintal 620.00

541 1219 Wire nails kg 40.00

542 1220 Wire mesh (rabbit) sqm 62.00

543 1221 20mm dia holding down bolts quintal 4000.00

544 1222 Mild steel sheets with bolts and nuts to rest on pintels each 205.00

545 1224 Hard drawn steel wire quintal 4300.00

Karaikal Page 23


546 1225 Mild steel flat strap fitting quintal 4240.00

547 1227 Chequered terrazzo tiles 22mm thick (light shade) sqm 275.00

548 1228 Chequered terrazzo tiles 22mm thick (medium shade) sqm 230.00

549 1229 Chequered terrazzo tiles 22mm thick (dark shade) sqm 200.00

550 1231 Extra for selected planks of second class teakwood 10cudm 72.00

551 1234 Aluminium plain strip edging 57x12x3mm metre 130.00

552 1235 Diesel oil litre 42.65

553 1237 Cutting marble or sand stone slab upto 50mm tk by mechanical device

metre 5.70

554 1238 Extra for selected planks of firstclass teakwood 10 cudm 80.00

555 1241 Commercial LPG in cylinder kg 35.00

556 1257C Thermocoal plain sheet - 19mm thick sqm 40.00

557 1301 Bleaching powder quintal 3100.00

558 1304 Surface box for stop cock each 74.00

559 1305 Surface box for sluice valve each 148.00

560 1307 Surface box for water meter each 258.00

561 1309 C.I.bracket for washbasin and sinks pair 71.00

562 1314 C.P.brass chain with 32mm dia rubber plug each 188.00

563 1315 C.P.brass chain with 40mm dia rubber plug each 213.00

564 1330 Clamps and M.S.stays including bolts and nuts for 100mm pipe each 24.00

565 1331 M.S.holder bat clamp of approved design for 100mm S.C.I.pipe each 23.00

566 1332 M.S.holder bat clamp of approved design for 75mm S.C.I.pipe each 11.00



569 1336 Clearing eye with chain and lid 100mm dia each 42.00

Karaikal Page 24


570 1337 Clearing eye with chain and lid 150mm dia each 48.00

571 1339 Brass bib -cock 15mm dia each 194.00

572 1340 Brass bib-cock 20mm dia each 225.00

573 1342 Brass stop-cock 15mm dia each 231.00

574 1343 Brass stop-cock 20mm dia each 281.00

575 1350 Mosquito proof coupling of approved design each 40.00

576 1352 C.I.cover and frame 300x300 mm inside each 295.00

577 1353 C.I.cover without frame 300x300mm inside i/c cover of 4.50kg each 300.00

578 1354 Rectangular cover 455x610mm with frame (low duty) each 1050.00

579 1355 Rectangular cover 455x610mm without frame (low duty) each 450.00

580 1356 500mm dia cover with frame (medium duty) each 1400.00

581 1357 500mm dia cover without frame (medium duty) each 1000.00

582 1358 DI manhole cover- 560mm dia circular hinged cover with square frame.( Not less

each 6656.00

583 1358A DI manhole cover- 560mm dia circular hinged cover with square frame.( Not less

each 7488.00

584 1359 DI Rectangular IC Cover 450x600mm Rectangular Hinged cover with frame.(Not less

each 5824.00

585 1360 C.I.mouth,brass ferrule 15 mm dia each 150.00


587 1361A Precast concrete manhole cover- 600mm dia circular cover with frame.( Not less

each 2572.50


589 1362A Precast concrete manhole cover- 560mm dia circular cover with frame.( Not less

each 1898.75

590 1363 Vitreous china foot rests 250x130x30 mm pair 82.00

591 1363A Precast concrete rectangular cover 450x600mm Rectangular cover with frame.(Not

each 2511.25

592 1364 C.I grating 100x100 mm each 15.00

593 1364A Precast concrete rectangular cover 450x600mm Rectangular cover with frame.(Not

each 1286.25

Karaikal Page 25


594 1365 C.I.grating 150x100mm each 19.00

595 1366 C.I grating 150x150 mm each 25.00

596 1367 C.I.grating 180x180mm each 28.00

597 1369 S.C.I.gully or nahani grating 100mm dia each 13.00

598 1371 Hydrant (FIRE) 2 Kg each 1600.00

599 1371A Hydrant (FIRE) 4.5 Kg each 2400.00

600 1372A 65mm dia (Rubber insertion for flanged pippe joints) each 24.00

601 1372B 80mm dia (Rubber insertion for flanged pippe joints) each 25.00

602 1372C 100mm dia (Rubber insertion for flanged pippe joints) each 30.00

603 1372D 125mm dia (Rubber insertion for flanged pippe joints) each 51.00

604 1372E 150mm dia (Rubber insertion for flanged pippe joints) each 53.00

605 1372F 200mm dia (Rubber insertion for flanged pippe joints) each 77.00

606 1372G 250mm dia (Rubber insertion for flanged pippe joints) each 152.00

607 1372H 300mm dia (Rubber insertion for flanged pippe joints) each 181.00

608 1372I 350mm dia (Rubber insertion for flanged pippe joints) each 319.00

609 1372J 400mm dia (Rubber insertion for flanged pippe joints) each 360.00

610 1372K 450mm dia(Rubber insertion for flanged pippe joints) each 521.00

611 1372L 500mm dia (Rubber insertion for flanged pippe joints) each 627.00

612 1372M 600mm dia (Rubber insertion for flanged pippe joints) each 799.00

613 1372N 700mm dia (Rubber insertion for flanged pippe joints) each 1043.00

614 1372O 750mm dia (Rubber insertion for flanged pippe joints) each 2218.00

615 1372P 800mm dia (Rubber insertion for flanged pippe joints) each 2541.00

616 1372Q 900mm dia (Rubber insertion for flanged pippe joints) each 2831.00

617 1372R 1000mm dia (Rubber insertion for flanged pippe joints) each 3696.00

Karaikal Page 26


618 1373 Rubber insertions for 80mm dia pipe joints each 20.00

619 1373A 80mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark)

each 45.00

620 1373B 100mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark)

each 51.00

621 1373C 150mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark)

each 73.00

622 1373D 200mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark)

each 111.00

623 1373E 250mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark)

each 156.00

624 1373F 300mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark)

each 209.00

625 1373G 350mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark)

each 243.00

626 1373H 400mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark)

each 337.00

627 1373I 450mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark)

each 376.00

628 1373J 500mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark)

each 499.00

629 1373K 600mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark)

each 636.00

630 1373L 700mm Dia( Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark)

each 917.00

631 1373M 750mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark)

each 1056.00

632 1373N 800mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark)

each 1201.00

633 1373O 900mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark)

each 1333.00

634 1373P 1000mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark)

each 1736.00


636 1374A 80mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark

each 55.00

637 1374B 100mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark

each 65.00

638 1374C 150mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark

each 92.00

639 1374D 200mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark

each 145.00

640 1374E 250mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark

each 203.00

641 1374F 300mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark

each 273.00

Karaikal Page 27


642 1374G 350mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark

each 314.00

643 1374H 400mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark

each 434.00

644 1374I 450mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark

each 488.00

645 1374J 500mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark

each 640.00

646 1374K 600mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark

each 825.00

647 1374L 700mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark

each 1173.00

648 1374M 750mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark

each 1377.00

649 1374N 800mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark

each 1506.00

650 1374O 900mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark

each 1657.00

651 1374P 1000mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark

each 2178.00











662 1392 Mirror of superior make glass 60x45cm each 460.00

663 1395 Juteyarn kg 55.00

664 1396 Vitreous china pedestal for wash basin each 920.00

665 1397 Pig lead kg 200.00

Karaikal Page 28


666 1398 "L" Clamp 30 cm long (12mm Dia) no 60.00

667 1399 Hire charge for pipe cutting machine day 200.00

668 1400AA Hire charge for pipe grinding machine day 200.00

669 1401 G.I Waste Not Tap -15mm(ALTO/GIFVAL) each 90.00

670 1401A G.I Waste Not Tap -20mm(ALTO/GIFVAL) each 140.00

671 1402 Brass Bib cock-20mm each 120.00

672 1464 S&S.C.I.standard specials upto 300mm dia (heavy class) quintal 4800.00

673 1466 S&S.C.I.standard specials over 300mm dia (heavy class) quintal 5100.00

674 1468 Flanged C.I.standard specials upto 300mm dia (heavy class) quintal 5200.00

675 1470 Flanged C.I.standard specials over 300mm dia (heavy class) quintal 5350.00

676 1472 Casing pipe 100 mm dia metre 450.00

677 1532 Flush pipe with union spreaders and clamps all in C.P.brass for single stall

each 250.00

678 1533 Flush pipe with union spreaders and clamps all in C.P.brass for double stall

each 425.00

679 1534 Flush pipe with union spreaders and clamps all in C.P.brass forrangof threestall

each 515.00

680 1535 Flush pipe with union spreaders and clamps all in C.P.brass forrangof fourstall

each 600.00

681 1540 Flush pipe and spreaders G.I.for single set of one squatting plate urinal

each 300.00

682 1541 Flush pipe and spreaders G.I.for single set of two squatting plate urinal

each 275.00

683 1542 Flush pipe and spreaders G.I.for single set of three squatting plate urinal

each 340.00

684 1543 Flush pipe and spreaders G.I.for single set of four squatting plate urinal

each 415.00

685 1545 G.I.pipes 15mm dia metre 130.00

686 1545P 15mm dia - G.I. pipe (medium) - IS-1239 (TATA,TNT,NEZONE, APOLLO, ZENITH

metre 150.80



metre 186.00


Karaikal Page 29



metre 260.00



metre 300.30



metre 335.40



metre 410.80



metre 594.10



metre 770.90

701 1555 G.I.back (jam)nuts 25mm dia each 20.00

702 1555A Water meter standard quality (Ataris) each 1200.00

703 1559 G.I.back (jam)nuts 65mm dia each 38.00

704 1559A 25 mm X 20 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 38.00

705 1559AA 150 mm x 80 mm dia-GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 1770.00

706 1559AB 150 mm x 100 mm dia-GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 1770.00

707 1559AC 150 mm x 125 mm dia-GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 1770.00

708 1559B 32 mm x 20 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 51.00

709 1559C 32 mm x 25 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 51.00

710 1559D 40 mm x 20 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 63.00

711 1559D1 40 mm x 25 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 63.00

712 1559E 40 mm x 32 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 63.00

713 1559F 50 mm x 20 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 91.00

Karaikal Page 30


714 1559F1 50 mm x 25 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 91.00

715 1559G 50 mm x 32 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 91.00

716 1559H 50 mm x 40 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 91.00

717 1559I 65 mm x 20 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 150.00

718 1559I1 65 mm x 25 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 150.00

719 1559J 65 mm x 32 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 150.00

720 1559K 65 mm x 40 mm dia-GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 150.00

721 1559L 65 mm x 50 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 150.00

722 1559M 80 mm x 32 mm dia-GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 222.00

723 1559N 80 mm x 40 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 222.00

724 1559O 80 mm x 50 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 222.00

725 1559P 80 mm x 65 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 222.00

726 1559Q 100 mm x 40 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 344.00

727 1559R 100 mm x 50 mm dia-GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 344.00

728 1559S 100 mm x 65 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 344.00

729 1559T 100 mm x 80 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 344.00

730 1559U 125 mm x 50 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 1310.00

731 1559V 125 mm x 65 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 1310.00

732 1559W 125 mm x 80 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 1310.00

733 1559X 125 mm x 100 mm dia-GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 1310.00

734 1559Y 150 mm x 50 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 1770.00

735 1559Z 150 mm x 65 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 1770.00

736 1560 15 mm dia - GI ELBOW - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 25.00

737 1560A 20 mm dia - GI ELBOW - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 33.00

Karaikal Page 31


738 1560B 25 mm dia - GI ELBOW - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 46.00

739 1560C 32 mm dia - GI ELBOW - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 67.00

740 1560D 40 mm dia - GI ELBOW - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 89.00

741 1560E 50 mm dia - GI ELBOW - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 126.00

742 1560F 65 mm dia - GI ELBOW - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 231.00

743 1560G 80 mm dia - GI ELBOW - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 308.00

744 1560H 100 mm dia - GI ELBOW - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 567.00

745 1560I 125 mm dia - GI ELBOW - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 1910.00

746 1560J 150 mm dia - GI ELBOW - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 2325.00

747 1561A 25 mm X 20 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 46.00

748 1561AA 150 mm x 80 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 2375.00

749 1561AB 150 mm x 100mm dia-GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 2380.00

750 1561AC 150 mm x 125mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 2390.00

751 1561B 32 mm x 20 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 68.00

752 1561C 32 mm x 25 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 68.00

753 1561D 40 mm x 20 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 89.00

754 1561D1 40 mm x 25 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 89.00

755 1561E 40 mm x 32 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 89.00

756 1561F 50 mm x 20 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 126.00

757 1561F1 50 mm x 25 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 126.00

758 1561G 50 mm x 32 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 126.00

759 1561H 50 mm x 40 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 126.00

760 1561I 65 mm x 20 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 241.00

761 1561I1 65 mm x 25 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 241.00

Karaikal Page 32


762 1561J 65 mm x 32 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 241.00

763 1561K 65 mm x 40 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 241.00

764 1561L 65 mm x 50 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 241.00

765 1561M 80 mm x 32 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 318.00

766 1561N 80 mm x 40 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 318.00

767 1561O 80 mm x 50 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 318.00

768 1561P 80 mm x 65 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 318.00

769 1561Q 100 mm x 40 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 577.00

770 1561R 100 mm x 50 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 577.00

771 1561S 100 mm x 65 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 577.00

772 1561T 100 mm x 80 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 577.00

773 1561U 125 mm x 50 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 1896.00

774 1561V 125 mm x 65 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 1910.00

775 1561W 125 mm x 80 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 1950.00

776 1561X 125 mm x 100mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 1950.00

777 1561Y 150 mm x 50 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 2365.00

778 1561Z 150 mm x 65 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 2370.00

779 1562A 15mm - GI HexNipple- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 26.50

780 1562B 20mm - GI HexNipple- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 34.00

781 1562C 25mm - GI HexNipple- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 46.00

782 1562D 32mm - GI HexNipple- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 69.00

783 1562E 40mm - GI HexNipple- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 82.00

784 1562F 50mm - GI HexNipple- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 118.00

785 1562G 65mm - GI HexNipple- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 218.00

Karaikal Page 33


786 1562H 80mm - GI HexNipple- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 350.00

787 1562I 100mm - GI HexNipple- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 590.00

788 1563A 15mm - GI Bend- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 35.00

789 1563B 20mm - GI Bend- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 50.00

790 1563C 25mm - GI Bend- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 70.00

791 1563D 32mm - GI Bend- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 85.00

792 1563E 40mm - GI Bend- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 150.00

793 1563F 50mm - GI Bend- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 175.00

794 1563G 65mm - GI Bend- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 255.00

795 1563H 80mm - GI Bend- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 390.00

796 1563I 100mm - GI Bend- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 690.00

797 1563J 125mm - GI Bend- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 1100.00

798 1563K 150mm - GI Bend- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 1600.00

799 1564A 15mm - GI Coupling- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 24.00

800 1564B 20mm - GI Coupling- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 31.00

801 1564C 25mm - GI Coupling- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 37.00

802 1564D 32mm - GI Coupling- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 51.00

803 1564E 40mm - GI Coupling- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 62.00

804 1564F 50mm - GI Coupling- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 91.00

805 1564G 65mm - GI Coupling- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 150.00

806 1564H 80mm - GI Coupling- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 222.00

807 1564I 100mm - GI Coupling- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 354.00

808 1564J 125mm - GI Coupling- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 600.00

809 1564K 150mm - GI Coupling- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 700.00

Karaikal Page 34


810 1565A 15 mm - GI Plug - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 15.00

811 1565B 20 mm - GI Plug - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 20.00

812 1565C 25 mm - GI Plug - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 25.00

813 1565D 32 mm - GI Plug - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 30.00

814 1565E 40 mm - GI Plug - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 35.00

815 1565F 50 mm - GI Plug - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 50.00

816 1565G 65 mm - GI Plug - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 70.00

817 1565H 80 mm - GI Plug - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 85.00

818 1565I 100 mm - GI Plug - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 110.00

819 1565J 125 mm - GI Plug - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 210.00

820 1565K 150 mm - GI Plug - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 350.00

821 1566A 15mm - GI Cap - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 15.00

822 1566B 20mm - GI Cap - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 20.00

823 1566C 25mm - GI Cap - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 28.00

824 1566D 32mm - GI Cap - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 35.00

825 1566E 40mm - GI Cap - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 45.00

826 1566F 50mm - GI Cap - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 55.00

827 1566G 65mm - GI Cap - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 80.00

828 1566H 80mm - GI Cap - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 95.00

829 1566I 100mm - GI Cap - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 120.00

830 1566J 125mm - GI Cap - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 235.00

831 1566K 150mm - GI Cap - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND)

each 335.00

832 1567A 15 mm dia - GI Pipe Nipple 10cm long each 27.00

833 1567B 20 mm dia - GI Pipe Nipple 10cm long each 31.00

Karaikal Page 35


834 1567B1 25 mm dia - GI Pipe Nipple 10cm long each 41.00

835 1567C 32 mm dia - GI Pipe Nipple 10cm long each 44.00

836 1567D 40 mm dia - GI Pipe Nipple 10cm long each 50.00

837 1567E 50 mm dia - GI Pipe Nipple 10cm long each 65.00

838 1567F 65 mm dia - GI Pipe Nipple 10cm long each 87.00

839 1567G 80 mm dia - GI Pipe Nipple 10cm long each 113.00

840 1567H 100 mm dia - GI Pipe Nipple 10cm long each 150.00

841 1567I 125 mm dia - GI Pipe Nipple 10cm long each 185.00

842 1567J 150 mm dia - GI Pipe Nipple 10cm long each 250.00





847 1568D 40 mm dia - GI Pipe Nipple 15cm long each 69.00

848 1568E 50 mm dia - GI Pipe Nipple 15cm long each 93.00

849 1568F 65 mm dia - GI Pipe Nipple 15cm long each 126.00

850 1568G 80 mm dia - GI Pipe Nipple 15cm long each 165.00

851 1568H 100 mm dia - GI Pipe Nipple 15cm long each 235.00

852 1568I 125 mm dia - GI Pipe Nipple 15cm long each 285.00

853 1568J 150 mm dia - GI Pipe Nipple 15cm long each 360.00





Karaikal Page 36


858 1569D

puducherry schedule of rates - :: pwdpwd.puducherry.gov.in/document/psr_karaikal_2011-12.pdf ·...

Documents