prusament upcycling - laptop riser · laptopriser prusamentspool upcycling stand spool riser...
TRANSCRIPT
Summary
As mentioned in the title, it's a Laptop Riser!
The hexagonal grid of the prusament spools makes very easy to attachsome bolts and nuts to it. I was in need of a laptop riser that could releasethe neck pain of always looking down while working on it, so a few parts,nuts and bolts and got there pretty easy!
Here a short video of it: https://youtu.be/ptuQ-sLqS1o
The print is designed to be printed with no supports, the parts are namedA or B because some are mirror of the others.
You will need M4-20mm bolts and nuts (14 of each).
For assembly I attached some explanatory pictures of how should the nutsand pieces be placed. The pieces that have the hexagonal hole for the nutare the ones that should be attached to the bottom, as well as the holderitself.
The short piece that connects both holders is not completelly necessary ifyour laptop weight is light, in my case after first test those pieces weregoing together due to the weight of the laptop, so that simple piece keepsthem in the proper separation and doesnt need any glue.
The G-Code I included is printed with a bit low temperature because I wasgetting some stringing with my galaxy black prusament.
Archetrico
PrusamentUpcycling - LaptopRiser
VIEW IN BROWSER
updated 14. 7. 2020 | published 14. 7. 2020
7.40 hrs
1 pcs
f
0.20 mm
k
0.40 mm
h
1
64.00 g
d
PrusaMK3/S
Print Files (.gcode) DOWNLOAD ALL FILES
13.9 MB
7.40 hrs f 0.20 mm k 0.40 mm h PLA 63.70 g d PrusaMK3/S
updated 13. 7. 2020
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
2.3 MBupdated 13. 7. 2020
1.0 MBupdated 14. 7. 2020
1.0 MBupdated 14. 7. 2020
Hope you find it useful and like it.
Household > Office
laptopriser prusamentspool upcycling stand spool riser
prusament laptopstand laptopaccessories laptop
filamentspool
It is so easy to print, no supports, 0.2 layer height and 15% infill is enough.
laptop-riser-complete_02mm_pla_mk3s_7h24m.gcode
laptop-riser-complete.3mf
01-base-1-a.stl
02-base-2-a.stl
1.2 MBupdated 14. 7. 2020
1.2 MBupdated 14. 7. 2020
1.0 MBupdated 14. 7. 2020
1.0 MBupdated 14. 7. 2020
1.2 MBupdated 14. 7. 2020
1.2 MBupdated 14. 7. 2020
569.2 KBupdated 14. 7. 2020
568.4 KBupdated 14. 7. 2020
181.7 KBupdated 14. 7. 2020
03-top-1-a.stl
04-top-2-a.stl
01-base-1-b.stl
02-base-2-b.stl
03-top-1-b.stl
04-top-2-b.stl
05-holder-v2-a.stl
05-holder-v2-b.stl
05-holder-v2-c.stl
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition