proven - pump & packageatex gost-r ehedg ce fda uses advanced technology to complete full...

36
PROVEN PUMPING SOLUTIONS A Warren Rupp, Inc. Brand www.blagdonpump.com

Upload: others

Post on 25-Aug-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: PROVEN - Pump & PackageATEX GOST-R EHEDG CE FDA Uses advanced technology to complete full diaphragm expansion using up to 50% less air while maintaining fl ow. AODD pumps fully expand

PROVEN

PUMPING SOLUTIONS

A Warren Rupp, Inc. Brand

www.blagdonpump.com

Page 2: PROVEN - Pump & PackageATEX GOST-R EHEDG CE FDA Uses advanced technology to complete full diaphragm expansion using up to 50% less air while maintaining fl ow. AODD pumps fully expand

PROVEN PERFORMANCE • RELIABLE PUMPING SOLUTIONS2

ABOUT BLAGDON

Our BackgroundBlagdon Pump was founded in the early 1950’s in the North East of England as a specialist pump manufacturer. In 1979 production of AIR OPERATED DOUBLE DIAPHRAGM PUMPS commenced and we soon became a market leader. In 1997 the US based multinational IDEX Corporation acquired Blagdon Pump to strengthen their global position in the double diaphragm market. Blagdon Pump transferred operations to Ireland in 2009. Blagdon Pump is dynamic and evolving. Our aim is to make dealing with us an easy and effi cient experience – a service you can rely on for all your pump requirements.

Our MissionBlagdon AODD pumps provide high performance, reliable solutions for your pumping needs. We specialise in extreme condition environments and applications, keeping your process moving both above and below ground.

Our WebsiteWe are committed to offering you a dedicated sales and after sales service which is second to none. Now you can keep up to date with developments as they happen with our website, www.blagdonpump.com. We look forward to working with you.

Blagdon Certifi cations

AIRVANTAGE - Energy Saving TechnologyAirVantage is a new technology for Air Operated Double Diaphragm pumps that signifi cantly reduces air consumption over conventional AODD pumps.

ATEX CE FDAGOST-R EHEDG

Uses advanced technology to complete full diaphragm expansion using up to 50% less air while maintaining fl ow.

AODD pumps fully expand diaphragms

to complete pump stroke, causing

increased air usage and expense.

Conventional

vs. tfet

Visit the Blagdon AirVantage website at www.airvantagepump.com/blagdon to learn more about this award winning technology.

Benefi ts of AirVantage• Reduces air consumption • Adapts to process conditions • Powered only by compressed air

• Saves energy while maintaining fl ow • Increases productivity • Reduces compressor maintenance

AAr

NEW

Page 3: PROVEN - Pump & PackageATEX GOST-R EHEDG CE FDA Uses advanced technology to complete full diaphragm expansion using up to 50% less air while maintaining fl ow. AODD pumps fully expand

WWW.BLAGDONPUMP.COM 3

PRODUCTS

Individual specifi cation sheets available for download at www.blagdonpump.com

Air operated double diaphragm pumps have long been recognised as the “work horse” of the industry for handling diffi cult liquids at relatively low pressures and fl ows. The range of applications is virtually limitless. Blagdon AODD pumps come in many sizes and choices of materials of construction. Almost every type of liquid from highly corrosive acids through high viscosity paints and adhesives, to food and drink products can be pumped.

Blagdon 1/2”, 1” and 2” EHEDG approved hygienic pumps in polished 316L stainless steel

ddd d

Blagdon 1/2”, 1”, 1 1/2” and 2” FDA compliant pumps in polished steel plus assorted standard fl uid fi ttings

Blagdon 1” and 2” high pressure 2:1 pumps available in aluminum, stainless steel

Blagdon metallic pumps available in aluminum, cast iron, stainless steel from 1/4” to 3”

Blagdon non-metallic pumps available in conductive polypropylene, and kynar(PVDF) from 1/4” to 2”

900

24030 60 90 120 150 180 210

800700600500400300200100VARIABLE FLOWS - LPM

VARIABLE FLOWS - GPM

VAR

IAB

LE H

EAD

S - P

SI (B

ar)

1/4”

1/2”

1”

2”

3”

1 1/2”

100 PSI (7 Bar)

Page 4: PROVEN - Pump & PackageATEX GOST-R EHEDG CE FDA Uses advanced technology to complete full diaphragm expansion using up to 50% less air while maintaining fl ow. AODD pumps fully expand

PROVEN PERFORMANCE • RELIABLE PUMPING SOLUTIONS4

BLAGDON BENEFITS

Blagdon offers an extensive pump range for handling fl uid media safely and cost effectively. We offer low cost ownership, by combining high quality wear parts with low price spares and a vast array of accessories. A fl exible modular design of pumps means we can offer short lead times and high degree of customising opportunities. Our experienced staff can provide instant support for installation, servicing, maintentance or a technical enquiry. We offer a fast spares delivery service, with many items in stock for immediate delivery.

The Pump Chambers are alternatively fi lled and emptied by drawing fl uid in through a common (suction) inlet (C), and out through a common (discharge) outlet (D). The diaphragms in each chamber are linked by a common shaft, so that they move backwards and forwards in unison. Compressed air is directed by the air valve alternatively, behind each diaphragm, to power discharge strokes. Pump speed, fl uid output and pressure (or head) is controlled by increasing or decreasing the fl ow of compressed air to the pump.

Operation Sequence

How the air-operated, double diaphragm pump operates

Key features and benefi ts of a Blagdon Pump•• Can run dry without damage or heat build up •• Fully submersible•• Designed to operate at low noise levels•• Leak-free air valves, easily removed for servicing•• Easily maintained – Stripped down quickly without any specialist tools•• Self priming to over 6 metres (19.7 Feet)•• Can safely “dead head” against closed discharge •• Low degradation and minimum product agitation•• Low start up pressures•• Portable and compact – can be remotely controlled •• Safe in hazardous areas – No sparking – Air-driven

Discharge Cycle:In chamber (A), air has been applied to the rear of the diaphragm to force out the fl uid in the chamber through the ball valve (3) to the discharge manifold (D). The discharge stroke ‘closes’ the ball valve (1) to prevent further liquid entering the chamber. This cycle is repeated to provide a continuous fl ow to the discharge manifold at outlet (D).

Suction Cycle:Fluid is drawn into the suction manifold at (C), by the suction stroke of the diaphragm and into chamber (B). This ‘opens’ the ball valve (2) to allow liquid to enter the chamber. Ball valve (4) is drawn into the valve seat and ‘closed’ by the diaphragm suction stroke.

of ut

)

w d

ve er

ve

e.

Page 5: PROVEN - Pump & PackageATEX GOST-R EHEDG CE FDA Uses advanced technology to complete full diaphragm expansion using up to 50% less air while maintaining fl ow. AODD pumps fully expand

WWW.BLAGDONPUMP.COM 5

INSTALLATION SOLUTIONS

Pump DutiesBlagdon pumps can be installed in any of the models illustrated to perform the following duties: Liquid Transfer, Slurry Handling, Filter Feeding, Circulation, De-watering, Low Pressure, Spray Supply, Tank/Sump/Barrel/Drum Filling and Emptying, Batching/Mixing/Metering/Dosing, and Chemical Injection, etc.

A full list of chemicals and recommended elastomers isavailable on request, or our sales offi ce can advise on the best pumps and materials for specifi c media.

Typical range of products you can pump.

• ABRASIVES: Clay slip, titanium dioxide, mill scale

• ACIDS: All mineral and organic acids

• ADHESIVE: Solvent and water based

• ALCOHOLS: Chemicals

• CAUSTICS: Acids

• CEMENT: Slip, glazes, clay

• COSMETICS: Creams, emulsions, detergents

• DRILLING: Mud, grout, lubricants

• DRINKS: Soft drinks, spirits, beer, wine, milk

• EXPLOSIVES: Suspensions of gun powder, explosives, etc.

• FOODS: Liquid and semi-solid foods, fl avourings

• INKS & DYES: Printing inks, dryers, dyes, sizes and solvents

• OILS: Petrol, diesel, hydraulic, and cutting oils, lude oils, animal and vegetable oils and greases

• PAINT: Emulsions, latexes, pigments, solvents, resins, thinners

• PHARMACEUTICALS: Liquids, creams, and compounds

• PLATING: Aggressive acids, salts, sludge and effl uents

• PULPS: paper, wood, sizes, bleaches

• RESINS: Natural and synthetics, water and solvent based, monomeric and polymeric plastics

• RUBBER: Gum, latex

• SLUDGE & WASTE: Sewage, effl uents, coal and lime slurry

• SOLVENTS: Aromatic and aliphatics, ketones, aldehydes, esters and chlori-nated hydrocarbons, de-icing fl uids

• TIMBER PRESERVATIVES: Creosote, turpentine, copper napthenate

• WATER: All types

Self Priming

Submerged Operation

Permanent or Portable Options

Filling / Injection / Dosing

Flooded Suction

Safe for Hazardous Areas

Page 6: PROVEN - Pump & PackageATEX GOST-R EHEDG CE FDA Uses advanced technology to complete full diaphragm expansion using up to 50% less air while maintaining fl ow. AODD pumps fully expand

PROVEN PERFORMANCE • RELIABLE PUMPING SOLUTIONS6

PORTFOLIO INFORMATION

BlagdonPortfolio Information

DiaphragmPump Model/Size/Material

B06 - 1/4" Stainless Steel

B25 - 1” Aluminium

B40 - 1 1/2” Stainless Steel

X75 - 3” Cast Iron

B15 - 1/2” Polypropylene

B50 - 2” PVDFB75 - 3” PolypropyleneB75 - 3” PVDF

B25 - 1” Full Flow 2:1

B50 - 2” Stainless Steel

B15 - 1/2” Aluminium

Non-Metallic Pumps(Ball Valve)

Metallic Pumps(Ball Valve)

Metallic Pumps(Flap Valve)

HygienicPumps

HighPressurePumps

FDAPumps

PTFEPumps

B40 - 1 1/2” Aluminium

B50 - 2” Stainless Steel

B06 - 1/4" PVDF

B25 - 1” PVDF

B50 - 2” Hygienic

B25 - 1” Stainless Steel

B25 - 1” Conductive PTFE

B25 - 1” Cast Iron

B50 - 2” Aluminium

X75 - 3” Stainless Steel

B15 - 1/2” PVDF

B15 - 1/2” Hygienic

B50 - 2” Full Flow 2:1

B15 - 1/2” Conductive PTFE

B15 - 1/2” Stainless Steel

B40 - 1 1/2” Cast Iron

X75 - 3” Aluminium

B10 - 3/8” Polypropylene

B50 - 2” Polypropylene

B25 - 1” Standard 2:1

B40 - 1 1/2” Stainless Steel

B25 - 1” Stainless Steel

B50 - 2” Cast Iron

B06 - 1/4" Polypropylene

B25 - 1” Polypropylene

X25 - 1” Cast Iron

X75 - 3” AluminumX75 - 3” Cast IronX75 - 3” Stainless SteelAVB75 / AVX75 - Aluminum Air VantageAVB75 / AVX75 - Cast Iron Air VantageAVB75 / AVX75 - Stainless Steel Air Vantage

X50 - 2” Cast Iron

X25 - 1” Stainless Steel

X25 - 1” Aluminum

X50 - 2” Stainless Steel

X50 - 2” Aluminum

B25 - 1” Hygienic

B15 - 1/2” Stainless Steel

B15 - 1/2” Virgin PTFE

B25 - 1” Virgin PTFE

Fluid Contact Materials Air Chamber Materials

Sta

inle

ss S

teel

Pol

ishe

d S

tain

less

Alu

min

ium

Cas

t Iro

n

Nic

kel P

late

d A

lum

iniu

m

Pol

ypro

pyle

ne

Sta

inle

ss S

teel

Epo

xy C

oate

d A

lum

iniu

m

Epo

xy C

oate

d S

tain

less

Ste

el

C PTF

E C

oate

d A

lum

inum

ondu

ctiv

e P

TFE

Bun

a-N

EP

DM

(Inc

. Foo

d G

rade

)

Geo

last

Pol

yest

er (H

ytel

)

Neo

pren

e

Con

duct

ive

PTF

E

Virg

in P

TFE

Alu

min

ium

Cas

t Iro

n

PV

DF

Pol

ypro

pyle

ne

Con

duct

ive

Pol

ypro

pyle

ne

Page 7: PROVEN - Pump & PackageATEX GOST-R EHEDG CE FDA Uses advanced technology to complete full diaphragm expansion using up to 50% less air while maintaining fl ow. AODD pumps fully expand

WWW.BLAGDONPUMP.COM 7

Materials Check Valve Materials Max. Flow Max. Op PressureAir Inlet Max. SolidSize (mm)Fluid Connections

34341111

1207640148028201143117

12012034341111644

20220220212012012076767640404014144

1361364848

53032018060

35012586

50013675

5305301521524848261616

889889889530530530320320320180180180606018

2”1 1/2”

1”1/2”2”1”1”

3/8”

1”1”1”2”2”2”

1/4”1/4”3”3”3”2”2”2”

1 1/2”1 1/2”1 1/2”

1”1”1”

1/2”1/2”1/4”

2” 150 RF2” 150 RF1” 150 RF1” 150 RF

1/2” 150 RF1/2” 150 RF

2”1”1”

3/8”3/8”1/4”1/4”3/4”3/8”3/8”1/4”3/4”3/8”1/4”3/4”3/8”1/4”

3/4”3/4”3/8”3/8”1/4”1/4”1/4”1/4”1/4”3/4”3/4”3/4”3/4”3/4”3/4”3/8”3/8”3/8”3/8”3/8”3/8”1/4”1/4”1/4”

7777

8.68.68.68.61616168.68.68.6

8.68.68888755

8.68.68.68.68.68.68.68.68.68.68.68.68.68.68.6

100100100100125125125125232232232125125125

125125

1007272125125125125

116116116116

125125125125125125125125125125125

332266326331032

66

238238

901901

3” 150 RF

3” 150 RF3” 150 RF3” 150 RF

3” 150 RF1”1”

6.96.9

100100

18

238 901 3” 1 0 RF 1” 6.9 100 18238 901 3” 1 0 RF 1” 6.9 100 18238 901 3” 1 0 RF 1” 6.9 100 18

18

33222

260140140140707070

988530530530265265265

3/4”3/4”3/4”3/4”1/2”1/2”1/2”

8.68.68.68.68.68.68.6

125125

125125125125125

8050

260260

988988

3/4”3/4”

6.96.9

125125

8080

5050252525

11101010666666333221

PTF

E (O

ne P

iece

)

Pol

yure

than

e

San

tropr

ene

PTF

EVi

ton

Bun

a-N

EP

DM

(Inc

. Foo

d G

rade

)

Neo

pren

e

San

topr

ene

Sta

inle

ss S

teel

PTF

E

Vito

n

UK

GP

M

L/M

in

BS

P(F

)

AN

SI F

lang

e

RJT

(M)

BS

P (N

PT)

F

Bar

PS

I

1/2” 150 RF1/2” 150 RF1” 150 RF1” 150 RF

Page 8: PROVEN - Pump & PackageATEX GOST-R EHEDG CE FDA Uses advanced technology to complete full diaphragm expansion using up to 50% less air while maintaining fl ow. AODD pumps fully expand

PROVEN PERFORMANCE • RELIABLE PUMPING SOLUTIONS8

TECHNICAL

Aggressive chemicals and most solvents. High temperature uses

N/A

Caustic solutions and dilute acids. Excellent abrasion resistance

Aggressive chemicals and solvents but with low abrasion resistance

Excellent abrasion resistance, dirty water, oils and hydrocarbons

High mechanical strength. Suitable with most oils, solvents and hydrocarbons

Excellent abrasion resistance. Widely used in the ceramics industry on dirty wate, clays, grout etc.

General purpose for use on water, most hydrocarbons and mild chemicals

Caustic solutions and dilute acids. Poor on oils and solvents

General purpose for use on water, most hydrocarbons and mild chemicals

Main Properties and Uses Min Optimum

Operating Temperatures

-18F-28C-11F-24C

50 to 140F10 to 60C50 to 140F10 to 60C50 to 140F10 to 60C50 to 130F10 to 54C50 to 130F10 to 54C50 to 130F10 to 54C50 to 212F10 to 100C50 to 140F10 to 60C

-10F-23C-4F

-20C-40F-40C-40F-40C32F0C

-10F-23CN/A N/A

0F-18C

ElastomerBuna-N

EPDM

Geolast

Neoprene

Polyester

Polyurethane

PTFE

Santoprene

Stainless Steel

Viton 75 to 212F24 to 100C

Ball Valve S.G.

Max WeightedStandard

7.80 N/AN/A

1.80 3.2

0.98 N/A

N/A N/A

N/A N/A

N/A N/A

1.23 2.64

1.0 N/A

1.23 2.64

1.23 2.64

356F180C

212F100C

356F180C

158F70C

158F70C

212F100C

212F100C

212F100C

176F80C

Viscosity Guide This table is a guide only – cps = centipoise

SAE

70 O

il17

640

cps

Wat

er1

cps

Tom

ato

Juice

176 c

ps

SAE

30 O

il35

2 cp

s

Gly

cerin

e88

0 cp

s

SAE

50 O

il15

61 c

ps

Glu

e30

00 c

ps

May

onna

ise

5000

cps

Mol

asse

s B

8640

cps

Sour

Cre

am15

200

cps

B50 - 2” Pumps Maximum 12000

X75 - 3” Pumps Maximum 25000

B06 - 1/4” Pumps

B10 - 3/8” Pumps

Maximum 2000

1 200 500 1000 2000 4000 10000 15000

Maximum 2000

B40 - 1 1/2” Pumps Maximum 12000

B15 - 1/2” Pumps Maximum 5000

B25 - 1” Pumps Maximum 5000

The air exhaust should be piped to an area for safe disposition of the product being pumped, in the event of a diaphragm failure.

CAUTION

Available fromDistributor

Available fromWarren Rupp, Inc.

Recommended Installation Guidelines

Viscosity GuidePump Identifi cation

Diaphragm & Ball Valve Options - Uses, Temperature Limits & Specifi c Gravity

For best results, the factory recommends installing the surge suppressor on the discharge side of the pump. Though the more common top-ported pump is shown here, this recommendation also applies to bottom, side and dual-ported diaphragm pumps.

The compressed air supply line to the surge suppressor should connect before a fi lter/regulator unit limited to inlet air of 125 PSI. To reduce piping and pump connection stresses, we recommend fl exible connections on bothinlet and outlet piping and air inlet connections.

Ball Valve

Flap Valve

Top Discharge

Bottom Discharge

Page 9: PROVEN - Pump & PackageATEX GOST-R EHEDG CE FDA Uses advanced technology to complete full diaphragm expansion using up to 50% less air while maintaining fl ow. AODD pumps fully expand

WWW.BLAGDONPUMP.COM 9

B06B06MOULDED NON-METALLIC

• • Simple construction, easy to maintain• • Self priming, ideal for emptying containers• • Pressures to 5 bar (73 PSI)• • Flow rates up to 16 litres/minute (4.3 gal/min)• • Bolted construction for safety• • Low break out pressure requirement• • Reliable pneumatic air valve system

Technical Data

NON-METALLIC SERIES B06POLYPROPYLENE & PVDFMaximum Delivery: 16 ltrs/min (4.3 gal/min)Max. Working Pressure: 5 bar (73 PSI)Max. Solid Particle Size: 1 mm. (0.04”)Air Inlet: 1/4” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 1.5 m. (4.9’)Suction Lift (Wet): 4.1 m. (13.5’)Fluid Inlet/Outlet: 1/4” BSP / NPTInstallation: Wall or surface mountedAccessories Included: Exhaust air Silencer

Shipping Weights:Polypropylene 1.7 kg. (3.8 lbs.)PVDF 1.9 kg. (4.2 lbs.)

Shipping Dimensions: 240 x 180 x 200 mm. (9.5” x 7.1” x 7.9”)

1269684

154

80.5

138

63

SILENCER

120 (WITH SILENCER FITTED)

17194

107

59 188

BLAGDON LABEL INCLUDING PUMP MODEL & SERIAL NO. FASTENEDTO MANIFOLD

4 MOUNTING HOLES Ø 6.0 IN

POSITION SHOWN

23

TYPICAL CODE = B06. 04. PP. BB. TTP

Example above: B06.04.PP.BB.TTP refers to B06 model, Design Level 4 with Polypropylene wetted components, Glass fi lled Polypropylene non-wetted components, with PTFE Diaphragms and Valve Balls and Polypropylene Seats.

Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.

Performance Curve

ps(14.

)5 i

0 Bar1.

( 9i

2 p )s

02ar

. B

(4 .3 5 psi)

4.0 Bar5)

8 p i(

s

A0

arP

S

5. BIR

RES URE

( 2.5)

7psi

10

0 2

0.4

4

0.8

6

1.3

8

1.7

10

2.2

12

2.6

14

3.0

20

20

0

30

40

40

60

80

50

ME

TRE

SH

EA

D

(2 CFM)33.5 M /hr

32 M /hr AIR CONSUMPTION(1.2 CFM)

(3.5 CFM)

36 M /hr

(5.8 CFM)

310 M /hr

(7.6 CFM)

313 M /hr

16

3.5

18

3.9 UK GPM

L/MIN

PS

IHE

AD

FEE

TH

EA

D

FLUID FLOW RATEAA

33

66

98

131

164

3.0 arrB

MODEL - B06

DESIGN LEVEL

WETTED COMPONENTSP: POLYPROPYLENEK: KYNAR (PVDF)

VALVE SEATSP: POLYPROPYLENEK: KYNAR (PVDF)

VALVE BALLST: PTFEV: VITON®

S: 316 STAINLESS STEEL

DIAPHRAGMSE: EPDMH: POLYESTERR: SANTOPRENE®

T: PTFEV: VITON®

O: ONE PIECE PTFE

NON-WETTED COMPONENTSP: POLYPROPYLENE (Glass Filled)

VALVE TYPEB: BALL

SUCTION ORIENTATIONB: BOTTOM

Dimensions

Page 10: PROVEN - Pump & PackageATEX GOST-R EHEDG CE FDA Uses advanced technology to complete full diaphragm expansion using up to 50% less air while maintaining fl ow. AODD pumps fully expand

PROVEN PERFORMANCE • RELIABLE PUMPING SOLUTIONS10

B06B06 METALLIC SERIES

• • Simple construction, easy to maintain• • Self priming, ideal for emptying containers• • High quality investment cast design• • Pressures to 8.6 bar (125 PSI)• • Flow rates up to 18 litres/minute (4.8 gal/min)• • Bolted construction for safety• • Reliable pneumatic air valve system• • Constructed from 316L Stainless Steel

Technical Data

METALLIC SERIES B06STAINLESS STEELMaximum Delivery: 18 ltrs/min (4.8 gal/min)Max. Working Pressure: 8.6 bar (125 PSI)Max. Solid Particle Size: 1 mm. (0.04”)Air Inlet: 1/4” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 1.5 m. (4.9’)Suction Lift (Wet): 4.1 m. (13.5’)Fluid Inlet/Outlet: 1/4” BSP / NPTInstallation: Wall or surface mountedAccessories Included: Exhaust air Silencer

Shipping Weight:Stainless Steel 3.7 kg. (8.2 lbs.)

Shipping Dimensions: 240 x 180 x 200 mm. (9.5” x 7.1” x 7.9”)

TYPICAL CODE = B06. 04. SS. BB. TTS

Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.

Performance Curve

MODEL - B06: Standard X06: ATEX Approved

DESIGN LEVEL

WETTED COMPONENTSS: 316L STAINLESS STEEL

VALVE SEATSS: 316L STAINLESS STEEL

VALVE BALLST: PTFEV: VITON®

S: 316 STAINLESS STEEL

DIAPHRAGMSE: EPDMH: POLYESTERR: SANTOPRENE®

T: PTFEV: VITON®

O: ONE PIECE PTFE

NON-WETTED COMPONENTSS: 316L STAINLESS STEEL

VALVE TYPEB: BALL

SUCTION ORIENTATIONB: BOTTOM

Dimensions

SILENCER

112

98

123 33

15.5

122 148.5

189 (MANIFOLDS IN–LINE)

94.5

171110

76.5 AIR INLET

4 MOUNTING HOLESØ 6.5

AIR INLET1/4” BSP(F)

FLUID INLET1/4” BSP(F)

FLUID INLET1/4” BSP(F)

(3.5 CFM)6 3M /hr

30

0

10

20

(( psi1144.55 )

1.0 Bar

2

00.44

4

00.7 11.00

( 9 i2 s )pBBa.0022

r

4(( si)3.5 p.0 BB rr

3 aa

6

11.44

88

11.8

ips )(87

40

50

60

70

90

(2 CFM)

33.5 M /hr

( )ps58 i

(1i

01)ps

Bara7.0

5 psi)

(12

2 AIR CONSUMPTION3M /hr(1.2 CFM)

L/MIN

4.0

114

2.5

10

2.2

12

2.9

16

3.3

18

3.7

(7.6 CFM)13 3M /hr

UK GPM

(5.8 CFM)10 3M /hr

PS

IHE

AD

00

40

20

60

80

100

120

33

0

66

99

131

197

164

230

262

FLUID FLOW ROW RATEAA

ME

TRE

SH

EA

D

FEE

TH

EA

D

i7 5 pp

( 2. ss )4. arrB0

5 0 BB. ar

6.a0 B rr

80

Bar6

rararI

PE

URREE

8.

A RR

SS

Page 11: PROVEN - Pump & PackageATEX GOST-R EHEDG CE FDA Uses advanced technology to complete full diaphragm expansion using up to 50% less air while maintaining fl ow. AODD pumps fully expand

WWW.BLAGDONPUMP.COM 11

B15B15MOULDED NON-METALLIC SERIES

• • Simple construction, easy to maintain• • Self priming, ideal for emptying containers• • Strong, robust design• • Pressures to 8 bar (116 PSI)• • Flow rates up to 48 litres/minute (13 gal/min)• • Flanged or screwed end connections• • Pneumatic air valve, reliable and easy

Technical Data

MOULDED NON-METALLIC SERIES B15 POLYPROPYLENE & PVDF

Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.

Performance Curve

Maximum Delivery: 48 ltrs/min (13 gal/min)Max. Working Pressure: 8 bar (116 PSI)Max. Solid Particle Size: 2 mm. (0.08”)Air Inlet: 1/4” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 4.6 m. (15.1’)Suction Lift (Wet): 6.1 m. (20’)Fluid Inlet/Outlet: 1/2 ANSI #150 RF FlangedInstallation: Wall or surface mountedAccessories Included: Exhaust air Silencer

Shipping Weights:Polypropylene/Aluminum 5.3 kg. (11.7 lbs.)PVDF/Aluminum 7 kg. (15.4 lbs.)Polypropylene/Stainless Steel 12 kg. (26.5 lbs.)PVDF/Stainless Steel 13.5 kg. (29.8 lbs.)

Shipping Dimensions: 320 x 200 x 340 mm. (12.6” x 7.9” x 13.4”)

287 IN–LINE MANIFOLDS

208 304

51

133

260210

77

143.5

9

2085

170

20

84

MOUNTINGSLOTS

259

155 AIR INLET

AIR EXHAUST 1/4” BSP

SUCTION INLET 1/2” ANSI

150 FLANGE

DISCHARGEOUTLET

1/2” ANSI150 FLANGE

B8ar(11p i

6s )

B7ar(

ps )

101.5i6 B ra(87 s ) p i

5 Bar7p

( 2.5 si)4 Bar( 8 p5 si)3 Bar(43 si.5 p )2 Bar2( 9 psi)

1. Bar R R S5 AI P E SURE

21.7psi(

)

ME

TRE

SH

EA

D

30

0

10

20

2 4

FLUID FLOWRATEAA

6 8

60

40

50

70

80

(5.3 CFM)9 M /hr3

(6.5 CFM)11 M /hr3 21 M /hr3

(12.4 CFM) (17.6 CFM)30 M /hr3

FEE

TH

EA

D

99

12 - UK GPM10

0

33

66

197

131

164

230

266

PS

IHE

AD

42.6

28.4

14.2

0

113.6

99.4

71.0

56.8

85.2

10 20 30 40 50 L/MIN

TYPICAL CODE = B15. 01. PT. BB. TTP -LF

MODEL - B15: Standard X15: ATEX Approved

DESIGN LEVEL

LUBE FREE

WETTED COMPONENTSP: POLYPROPYLENEK: KYNAR (PVDF)G: CONDUCTIVE POLYPROPYLENE

VALVE SEATSB: BUNA-N K: KYNAR (PVDF)E:EPDM V: VITONN: NEOPRENEP: POLYPROPYLENE

VALVE BALLSB: BUNA-N K: KYNAR (PVDF)E: EPDM V: VITONN: NEOPRENES: 316 STAINLESS STEEL

DIAPHRAGMSB: BUNA-N P: POLYPROPYLENE E: EPDM R: SANTROPENEH:POLYESTER T: PTFEN: NEOPRENE V: VITONO: ONE PIECE PTFE

NON-WETTED COMPONENTST: EPOXY COATED ALUMINUMW: EPOXY COATED STAINLESS STEEL

VALVE TYPEB: BALL

SUCTION ORIENTATIONB: BOTTOM

Dimensions

*X Series ATEX pumps are ONLY applicable to Conductive Polypropylene pumps.

Page 12: PROVEN - Pump & PackageATEX GOST-R EHEDG CE FDA Uses advanced technology to complete full diaphragm expansion using up to 50% less air while maintaining fl ow. AODD pumps fully expand

PROVEN PERFORMANCE • RELIABLE PUMPING SOLUTIONS12

B15B15 METALLIC SERIES

• • Simple construction, easy to maintain• • Self priming, ideal for emptying containers• • Pressures to 8.6 bar (125 PSI)• • Flow rates up to 60 litres/minute (16 gal/min)• • Bolted construction for greater integrity• • Reliable pneumatic air valve design• • Portable

Technical Data

METALLIC SERIES B15ALUMINUM

Performance Curve

Maximum Delivery: 60 ltrs/min (16 gal/min)Max. Working Pressure: 8.6 bar (125 PSI)Max. Solid Particle Size: 2 mm. (0.08”)Air Inlet: 1/4” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 4.6 m. (15.1’)Suction Lift (Wet): 6.1 m. (20’)Fluid Inlet/Outlet: 1/2 BSP / NPTInstallation: Wall or surface mountedAccessories Included: Exhaust air Silencer

Shipping Weight:Aluminum 5.9 kg. (13 lbs.)

Shipping Dimensions: 320 x 200 x 340 mm. (12.6” x 7.9” x 13.4”)

100 83

25

245.5

127.583 44

203.5

89

120233160

127.5

124.5AIR INLET

FLUID DISCHARGE1/2” BSP

AIR INLET1/4” BSP

AIR EXHAUST1/4” BSP

FLUID SUCTION1/2” BSP

Ø 7mmMOUNTING HOLES

FLUID FLOW RLOW ATEAA

ME

TRE

SH

EA

D

30

20

20

40

10

10

2 6

20

4

30

88

85

80

70

50

4060

80

100

120

60

FEE

TH

EA

D

- UKK GPM10 12 14

L/MIN

50

100

250

150

200

PS

IHE

AD

0

277

40 50 60 70 -

8.0 Bar AIR PRESSURE

(116 psi)7 0

r. Ba( 0 .

1 1 5 psi)6.0 Bar(87 psi)

0 B5. ar72.)

( 5 psi4 0 B. ar58

i)( ps

33.0 Bar43. p ))( 5 si

2.0 Bar29.)

( 0 psi11.55 BBar

7(21. psi)

310 M /hr(5.8 CFM)

335 M /hr(20.6 CFM)

320 M /hr(11.7 CFM)

315 M /hr AIR CONSUMPTION(8.8 CFM)

TYPICAL CODE = B15. 01. AA. BB. TTS -LF

MODEL - B15: Standard X15: ATEX Approved

DESIGN LEVEL

LUBE FREE

WETTED COMPONENTSA: ALUMINUM

VALVE SEATSA: ALUMINUMB: BUNA-NE:EPDM N: NEOPRENEV: VITONS: 316 STAINLESS STEEL

VALVE BALLSB: BUNA-N V: VITONE: EPDM T: PTFEN: NEOPRENES: 316 STAINLESS STEEL

DIAPHRAGMSB: BUNA-N P: POLYPROPYLENE E: EPDM R: SANTROPENEH:POLYESTER T: PTFEN: NEOPRENE V: VITONO: ONE PIECE PTFE

NON-WETTED COMPONENTSA: ALUMINUM

VALVE TYPEB: BALL

SUCTION ORIENTATIONB: BOTTOM

Dimensions

Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.

Page 13: PROVEN - Pump & PackageATEX GOST-R EHEDG CE FDA Uses advanced technology to complete full diaphragm expansion using up to 50% less air while maintaining fl ow. AODD pumps fully expand

WWW.BLAGDONPUMP.COM 13

METALLIC SERIES B15B15

• • Simple construction, easy to maintain• • Self priming, ideal for emptying containers• • Pressures to 8.6 bar (125 PSI)• • Flow rates up to 60 litres/minute (16 gal/min)• • Bolted construction for greater integrity• • 316L Stainless Steel

Technical Data

METALLIC SERIES B15STAINLESS STEEL

Performance Curve

Maximum Delivery: 60 ltrs/min (16 gal/min)Max. Working Pressure: 8.6 bar (125 PSI)Max. Solid Particle Size: 2 mm. (0.08”)Air Inlet: 1/4” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 4.6 m. (15.1’)Suction Lift (Wet): 6.1 m. (20’)Fluid Inlet/Outlet: 1/2 BSP / NPTInstallation: Wall or surface mountedAccessories Included: Exhaust air Silencer

Shipping Weights:Stainless Steel/Aluminum 9.7 kg. (12.4 lbs.)Stainless Steel 15 kg. (33.1 lbs.)

Shipping Dimensions: 320 x 200 x 340 mm. (12.6” x 7.9” x 13.4”)

261

188

94

25

201

288 IN–LINE MANIFOLD OPTION

241

126 AIR INLET

AIR INLET1/4” BSP

156

75FLUID DISCHARGE1/2” BSP

AIR EXHAUST1/4” BSP

FLUIDSUCTION1/2” BSP

172

Ø 7MOUNTING

HOLES

FLUID FLOW RATEAA

ME

TRE

SH

EA

D

30

20

20

40

10

10

2 6

20

4

30

8

85

80

70

50

4060

80

100

120

60

FEE

TH

EA

D

- UK GPM10 12 14

L/MIN

50

100

250

150

200

PS

IHE

AD

0

277

40 50 60 70 -

8.0 Bar AIR PRESSURE

(116 psi)7 0

r. Ba( 0 .

1 1 5 psi)6.0 Bar(87 psi)

0 B5. ar72.)

( 5 psi4 0 B. ar58

i)( ps

3.0 Bar43. p )( 5 si

2.0 Bar29.)

( 0 psi1.5 Bar

7(21. psi)

310 M /hr(5.8 CFM)

335 M /hr(20.6 CFM)

320 M /hr(11.7 CFM)

315 M /hr AIR CONSUMPTION(8.8 CFM)

TYPICAL CODE = B15. 01. SA. BB. TTS -LF

MODEL - B15: Standard X15: ATEX Approved

DESIGN LEVEL

LUBE FREE

WETTED COMPONENTSS: 316 STAINLESS STEEL

VALVE SEATSS: 316 STAINLESS STEEL

VALVE BALLSB: BUNA-N T: PTFEE: EPDM V: VITONN: NEOPRENES: 316 STAINLESS STEEL

DIAPHRAGMSB: BUNA-N P: POLYPROPYLENE E: EPDM R: SANTROPENEH: POLYESTER T: PTFEN: NEOPRENE V: VITONO: ONE PIECE PTFE

NON-WETTED COMPONENTSA: ALUMINUMS: 316 STAINLESS STEEL

VALVE TYPEB: BALL

SUCTION ORIENTATIONB: BOTTOM

Dimensions

Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.

Page 14: PROVEN - Pump & PackageATEX GOST-R EHEDG CE FDA Uses advanced technology to complete full diaphragm expansion using up to 50% less air while maintaining fl ow. AODD pumps fully expand

PROVEN PERFORMANCE • RELIABLE PUMPING SOLUTIONS14

PTFE NON-METALLIC SERIESB15B15

• • Simple construction, easy to maintain• • Available in virgin and conductive PTFE• • Chemically inert• • Flanged end connections• • ATEX approved - intrinsically safe• • Reliable, proven pneumatic air valve• • Strong, robust design

Technical Data

NON-METALLIC SERIES B15CONDUCTIVE / VIRGIN PTFE

Performance Curve

Maximum Delivery: 48 ltrs/min (13 gal/min)Max. Working Pressure: 7 bar (102 PSI)Max. Solid Particle Size: 2 mm. (0.08”)Air Inlet: 1/4” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 4.6 m. (15.1’)Suction Lift (Wet): 6.1 m. (20’)Fluid Inlet/Outlet: 1/2 BSP / NPTInstallation: Wall or surface mountedAccessories Included: Exhaust air Silencer

Shipping Weights:Conductive PTFE 16 kg. (35.3 lbs.)Virgin PTFE 16 kg. (35.3 lbs.)

Shipping Dimensions: 320 x 200 x 340 mm. (12.6” x 7.9” x 13.4”)

Ø 40 FASTENED THRO’ WITH M6

SOCKET CAP SCREWS

MOUNTING PADS 158

Ø93

31.5

311.5265

273.5

212

53

54108

150

160 BODY DIA.

AIR INLET1/4” BSP

88

159AIR

INLET

GROUNDING LEAD - ATTACHED TO OUTER COVER.(ATEX CERTIFIED MODELS ONLY)

169

285AIR EXHAUST1/4” BSP

90.5

B7ar(

ps )

101.5i6 B ra(87 s ) p i

5 Bar7p

( 2.5 si)4 Bar( 8 p5 si)3 Bar(43 sisi.5 pp ))2 Bar2( 9 pspsi)i)

1. Bar R R S5 AI P E SURE

21.7psi(

)

ME

TRE

SH

EA

D

30

00

10

20

22 44

FLUID FLOFLOWRATEAA

66 88

60

40

50

70

80

(5.3 CFM)9 M /hr3

(6.5 CFM)11 M /hr3 21 M /hr3

(12.4 CFM) (17.6 CFM)30 M /hr3

FEE

TH

EA

D

99

12 - UK GPM1010

0

33

66

197

131

164

230

266

PS

IHE

AD

42.6

28.4

14.2

0

113.6

99.4

71.0

56.8

85.2

10 20 30 400 50 L/MIN

TYPICAL CODE = B15. 00. TS. BB. TTT -LF

MODEL - B15: Standard X15: ATEX Approved

DESIGN LEVEL

LUBE FREE

WETTED COMPONENTST: PTFE4: CONDUCTIVE PTFE

VALVE SEATST: PTFE

VALVE BALLST: PTFE

DIAPHRAGMST: PTFEX: PTFE/VITON (HIGH TEMP.)

NON-WETTED COMPONENTS4: CONDUCTICE PTFE5: POLYTHYLENE (HDPE)S: 316 STAINLESS STEEL

VALVE TYPEB: BALLW: WEIGHTED

SUCTION ORIENTATIONB: BOTTOM

Dimensions

*X Series ATEX pumps are ONLY applicable to Conductive PTFE pumps.

Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.

Page 15: PROVEN - Pump & PackageATEX GOST-R EHEDG CE FDA Uses advanced technology to complete full diaphragm expansion using up to 50% less air while maintaining fl ow. AODD pumps fully expand

WWW.BLAGDONPUMP.COM 15

HYGIENIC SERIES B15B15

Technical Data

HYGIENIC SERIES B15STAINLESS STEEL

Performance Curve

Maximum Delivery: 75 ltrs/min (20 gal/min)Max. Working Pressure: 8.6 bar (125 PSI)Max. Solid Particle Size: 2 mm. (0.08”)Air Inlet: 1/4” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 4.6 m. (15.1’)Suction Lift (Wet): 6.1 m. (20’)Fluid Inlet/Outlet: 1” RJT (Standard)Installation: Wall or surface mountedAccessories Included: Exhaust air Silencer

Shipping Weights:Stainless Steel/Aluminum 10.5 kg. (23.1 lbs.)Stainless Steel 15.8 kg. (34.8 lbs.)

Shipping Dimensions: 320 x 210 x 390 mm. (12.6” x 8.3” x 15.4”)

112 130

33.5

296 160

83

288 342

132

4MOUNTINGHOLES Ø9

SUCTION INLET1” MALE RJT

170AIR INLET

AIR INLET1/4” BSP(F)

SILENCER1/4” BSP

DISCHARGE OUTLET1” MALE RJT

FLUID FLOW RATEAA

50

100

150

20

40

60

80

100

120

PS

IHE

AD

FEE

TH

EA

D

200

250

280

ME

TRE

SH

EA

D

2

10

20

30

84 6 10 12 1814 16 - UK GPM

40

50

60

70

80

85

10 20 30 40 50 60 70 80 - L/MIN

330 M /hr(17.6 CFM)

310 M /hr(5.8 CFM)

320 M /hr(11.7 CFM)

315 M /hr AIR CONSUMPTION(8.8 CFM)

aR PRES

UR

8 Br AI

SE

(1 6 ps )1

i7.0 Bar(101.5 p )si6.0 Bar(87 psi)

a5.0 B r

)(72.5 psi

4 0 B r.

a(5 psi8

)

r3.0 Ba4( 3.5 psi)

0r

2. Ba2 0i

( 9. ps )

1.5 Bar21.7 ps

(i)

TYPICAL CODE = B15. 01. SA. BB. TTS -LF

MODEL - B15: Standard X15: ATEX Approved

DESIGN LEVEL

LUBE FREE

WETTED COMPONENTSZ: 316 STAINLESS STEEL (POLISHED)

VALVE SEATSE: FOOD GRADE EPDM

VALVE BALLSE: FOOD GRADE EPDMT: PTFES: 316 STAINLESS STEEL

DIAPHRAGMSE: FOOD GRADE EPDMT: PTFEO: ONE PIECE PTFE

NON-WETTED COMPONENTSS: 316 STAINLESS STEELF: NICKEL PLATED ALUMINUM

VALVE TYPEB: BALL

SUCTION ORIENTATIONB: BOTTOM

Dimensions

• • Range of DIN/RJT and Ferrule connections• • Self priming, ideal for emptying containers• • Food grade elastomers-EPDM/PTFE• • Pressures to 8.6 bar (125 PSI)• • Capable of handling high viscosity & S.G.• • Certifi ed CIP cleanable• • EU Design approval• • 316L stainless steel

Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.

Page 16: PROVEN - Pump & PackageATEX GOST-R EHEDG CE FDA Uses advanced technology to complete full diaphragm expansion using up to 50% less air while maintaining fl ow. AODD pumps fully expand

PROVEN PERFORMANCE • RELIABLE PUMPING SOLUTIONS16

MOULDED NON-METALLIC SERIESB25B25

• • Material options suitable for a wide range of chemicals• • Simple construction, easy to maintain• • Self priming, ideal for emptying containers• • Pressures to 8 bar (116 PSI)• • Flow rates up to 152 litres/minute (40 gal/min)• • Flanged or screwed end connections• • Reliable, pneumatic air valve• • Strong, robust design, bolted construction

Technical Data

MOULDED NON-METALLIC SERIES B25 POLYPROPYLENE & PVDF

Performance Curve

Maximum Delivery: 152 ltrs/min (40 gal/min)Max. Working Pressure: 8 bar (116 PSI)Max. Solid Particle Size: 3 mm. (0.12”)Air Inlet: 3/8” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 6.1 m. (20’)Suction Lift (Wet): 7.6 m. (24.9’)Fluid Inlet/Outlet: 1” ANSI #150 Flanged RFInstallation: Wall or surface mountedAccessories Included: Exhaust air Silencer

Shipping Weights:Polypropylene/Aluminum 13.5 kg. (29.8 lbs.)PVDF/Aluminum 18 kg. (39.7 lbs.)Polyporpylene/Stainless Steel 18 kg. (39.7 lbs.)PVDF/Stainless Steel 20 kg. (44.1 lbs.)

Shipping Dimensions: 440 x 260 x 470 mm. (17.3” x 10.2” x18.5”)

MOUNTINGSLOTS

64

317 CRS

108

DISCHARGE OUTLET1” ANSI 150 FLANGE

AIR INLET3/8” BSP(F)

AIR EXHAUST1/2” BSP(F)

SUCTIONINLET1” ANSI 150 FLANGE

230

115

20 20

205

9222

394432

105

435

ME

TRE

SH

EA

D

99 FEE

TH

EA

D

3042.6

0

14.2

0

28.4

00

10

20

FLUID FLUID FLOWRATEAA

5 10 15 - UK GPM20

0

33

66

6085.2

PS

IHE

AD

56.8

71.0

40

50

99.4

113.6

70

80

197

131

164

230

262

20 40 600 80 100 120 140 160 - L/MIN

25 30 35

8 Bar1(1 6 psi)

7 Bar(1 .5 ps )01 i

75 M /hr(44 CFM)

358 M /hr(34 CFM)

339 M /hr(23 CFM)

319 M /hr(11 CFM)

3

12 (7 CFM)

3M /hr

6 Bar8 )( 7 psi

5 Bar(72. ps5 i)4 Bar

)(58 psi3 Bar(4 .5 p )3 si22 BBar(2 )9 psi1 r R PRESSU E

Ba AIAIR(14. s )5 p i

TYPICAL CODE = B25. 05. PT. BB. EEP -LF

MODEL - B25: Standard X25: ATEX Approved

DESIGN LEVEL

LUBE FREE

WETTED COMPONENTSP: POLYPROPYLENEK: KYNAR (PVDF)G: CONDUCTIVE POLYPROPYLENE

VALVE SEATSB: BUNA-N N: NEOPRENEE: EPDMK: KYNAR (PVDF)P: POLYPROPYLENE

VALVE BALLSB: BUNA -N T: PTFE E: EPDM V: VITONN: NEOPRENES: STAINLESS STEEL

DIAPHRAGMSB: BUNA -N T: PTFE E: EPDM V: VITONH: POLYESTER (HYTREL)N: NEOPRENEP: POLYPROPYLENER: SANTOPRENEO: ONE PIECE PTFE

NON-WETTED COMPO-NENTST: ALUMINUM / EPOXY PAINTEDW: STAINLESS STEEL / EPOXY PAINTED

VALVE TYPEB: BALLW: WEIGHTED

SUCTION ORIENTATIONB: BOTTOM

Dimensions

*X Series ATEX pumps are ONLY applicable to Conductive Polypropylene pumps.

Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.

Page 17: PROVEN - Pump & PackageATEX GOST-R EHEDG CE FDA Uses advanced technology to complete full diaphragm expansion using up to 50% less air while maintaining fl ow. AODD pumps fully expand

WWW.BLAGDONPUMP.COM 17

METALLIC SERIES B25B25

• • Material options suitable for a wide range of applications• • Simple construction, easy to maintain• • Self priming, ideal for emptying containers• • Pressures to 8.6 bar (125 PSI)• • Flow rates up to 180 litres/minute (48 gal/min)• • Bolted construction for greater integrity• • Weighted Valve Balls for high S.G. and viscous fl uids• • Reliable, pneumatic air valve

Technical Data

METALLIC SERIES B25 ALUMINUM, STAINLESS STEEL, CAST IRON

Performance Curve

Maximum Delivery: 180 ltrs/min (48 gal/min)Max. Working Pressure: 8.6 bar (125 PSI)Max. Solid Particle Size: 3 mm. (0.12”)Air Inlet: 3/8” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 6.1 m. (20’)Suction Lift (Wet): 7.6 m. (24.9’)Fluid Inlet/Outlet: 1” BSP / NPTInstallation: Wall or surface mountedAccessories Included: Exhaust air Silencer

Shipping Weights:Aluminum 16 kg. (35.3 lbs.)Cast Iron/Aluminum 25 kg. (55.1 lbs.)Stainless Steel/Aluminum 25 kg. (55.1 lbs.)

Shipping Dimensions: 400 x 300 x 470 mm. (15.8” x 11.8” x 18.5”)

358210

105

226

AIR INLET3/8” BSPPARALLEL

FLUIDOUTLET1” BSPPARALLEL

EXHAUSTSILENCER1/2” BSP

192

50

215

AIR

INLE

T

215

AIR

EX

HA

US

T 329

CR

S

405

FLUIDINLET1” BSPPARALLEL

30 FEE

TH

EA

D

ME

TRE

SH

EA

D

0 0

10

20

FLUID FLOWRATEAA

0

60

40

50

70

80

90

42.6

28.4

14.2

113.6

99.4

71.0

56.8

85.2

PPSS

IIHHEE

AADD

99

33

66

197

131

164

230

262

127.8 295

200 40 60 100 140 160 200 - L/MIN18012080

5 10 15 20 25 - UK GPM4030 35

7 Bar10 .5 s ))( 1 p i6 Bar(87 psi)

4 Barp(58 si)

3 B ra(4 . psi))

3 5

2 Bar(29 psi)1 AI PRESSURE

Bar R 14.5 )( psi

5 Bar72.5 5 psp i))

(

8 BARR(116 si)p

8.6 Bar(125 psi)

19 M /hr(11 CFM)

3 39(23 CFM)

3M /hr 58(34 CFM)

3M /hr 75(44 CFM)(

3M /hr 100(59 CFM)

3M /hr

12(7 CFM)(

3M /hrh

TYPICAL CODE = B25. 05. AA. BB. BBS -LF

MODEL - B2505: Standard X2505: ATEX Approved

DESIGN LEVEL

LUBE FREE

WETTED COMPONENTSA: ALUMINUMS: 316L STAINLESS STEELC: CAST IRON

VALVE SEATSS: 316 STAINLESS STEEL

VALVE BALLSB: BUNA-N T: PTFEE: EPDM V: VITONN: NEOPRENE D: DELRINS: 316 STAINLESS STEEL

DIAPHRAGMSB: BUNA-N P: POLYURETHANE E: EPDM R: SANTROPENEH: POLYESTER T: PTFEN: NEOPRENE V: VITONO: ONE PIECE PTFE

NON-WETTED COMPONENTSA: ALUMINUMS: 316L STAINLESS STEEL

VALVE TYPEB: BALLW: WEIGHTED

SUCTION ORIENTATIONB: BOTTOM

Dimensions

Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.

Page 18: PROVEN - Pump & PackageATEX GOST-R EHEDG CE FDA Uses advanced technology to complete full diaphragm expansion using up to 50% less air while maintaining fl ow. AODD pumps fully expand

PROVEN PERFORMANCE • RELIABLE PUMPING SOLUTIONS18

PTFE - NON-METALLIC SERIESB25B25

• • Simple construction, easy to maintain• • Available in virgin and conductive PTFE• • Chemically inert• • Flanged end connections• • ATEX approved - intrinsically safe• • Reliable, proven pneumatic air valve• • Strong, robust design

Technical Data

NON-METALLIC SERIES B25CONDUCTIVE / VIRGIN PTFE

Performance Curve

Maximum Delivery: 136 ltrs/min (36 gal/min)Max. Working Pressure: 7 bar (102 PSI)Max. Solid Particle Size: 3 mm. (0.12”)Air Inlet: 3/8” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 6.1 m. (20’)Suction Lift (Wet): 7.6 m. (24.9’)Fluid Inlet/Outlet: 1” BSP / ANSI #150 FlangeInstallation: Wall or surface mountedAccessories Included: Exhaust air Silencer

Shipping Weights:Conductive PTFE 40 kg. (88.2 lbs.)Virgin PTFE 37 kg. (81.6 lbs.)

Shipping Dimensions: 500 x 300 x 450 mm. (19.7” x 11.8” x 17.7”)

60 281 188

63

298

137 1” BSP PARALLELFLUID OUTLET

1” BSP PARALLELFLUID INLET

AIR EXHAUST1/2” BSP

201386

411

230GROUNDING LEADATTACHED TO BASE LEG.(ATEX CERTIFIED MODELS ONLY)

212AIR INLET

AIR INLET3/8” BSP

391

ME

TRE

SH

EA

D

FEE

TH

EA

D

7.0 Bar1 p

(10 .5 si))

6.0 aB r(8 p i)7 s

5.0 rBa(72.5 ppsi)

. Bar4 0(5 p i)8 s

33 BBaar..00(4 .5 p i3 s )

2.0 Bar(2 .0 psi)9.1 5 Bar

1(2 .7 ppssii))

40 M 3/3 hr

30 M3/3 hr AIR CONSUMPTION

20 M3/3 hr

(23.5 CFM)

(17.6 CFM)

(11.7 CFM)

(38 CFM)65 /hr3//M

PPSS

IIHHEE

AADD

FLUID FLOWRAATETEAAAA

50

100

150

200

250

279

20

40

60

80

100

120

10

20

30

40

50

60

70

80

85

2020 4040 6060 80 100100 120120 140 160 L/MIN

4 168 12 220 24 - UK GGPM28 32

TYPICAL CODE = B25. 05. T5. BB. TTT -LF

MODEL - B25: Series 00 X25: ATEX Approved

DESIGN LEVEL

LUBE FREE

WETTED COMPONENTST: PTFE4: CONDUCTIVE PTFE

VALVE SEATST: PTFE

VALVE BALLST: PTFE

DIAPHRAGMST: PTFEX: PTFE/VITON (HIGH TEMP.)

NON-WETTED COMPONENTS4: CONDUCTICE PTFE5: POLYTHYLENE (HDPE)

VALVE TYPEB: BALLW: WEIGHTED

SUCTION ORIENTATIONB: BOTTOM

Dimensions

FLUID UID FLOWRAAF TETEAA

Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.

*X Series ATEX pumps are ONLY applicable to Conductive PTFE pumps.

Page 19: PROVEN - Pump & PackageATEX GOST-R EHEDG CE FDA Uses advanced technology to complete full diaphragm expansion using up to 50% less air while maintaining fl ow. AODD pumps fully expand

WWW.BLAGDONPUMP.COM 19

FULL FLOW HIGH PRESSURE B25B25

• • Robust construction, easy to maintain• • Can easily handle viscous, high S.G. and high head applications• • Smooth action, less vibration and wear• • Pressures to 16 bar (232 PSI)• • Flow rates up to 125 litres/minute (33 gal/min)• • Bolted construction for greater integrity• • Reliable pneumatic air valve• • Stalls against closed head without damage• • Re-start on demand

Technical Data

METALLIC SERIESFULL FLOW 2:1 B25

Performance Curve

Maximum Delivery: 125 ltrs/min (33 gal/min)Max. Working Pressure: 16 bar (232 PSI)Max. Solid Particle Size: 3 mm. (0.12”)Air Inlet: 3/8” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 6 m. (20’)Suction Lift (Wet): 7.6 m. (24.9’)Fluid Inlet/Outlet: 1” BSP / NPTInstallation: Surface mountedAccessories Included: Exhaust air Silencer

Shipping Weights:Stainless Steel/Aluminum 33 kg. (72.8 lbs.)Aluminum 24.5 kg. (54 lbs.)

Shipping Dimensions: 480 x 320 x 480 mm. (18.9” x 12.6” x 18.9”)

254

405

464

438

72 105

250

50

330

280

MOUNTING HOLESØ 8.5 THRO’

DISCHARGE OUTLET1” BSP (F)

3/8” BSP (F)AIR INLET

AIR EXHAUST1/2” BSP(F)

202AIR INLET

SUCTION INLET1” BSP (F)

100

FLUID FLOW RATEAA

ME

TRE

SH

EA

D

60

40

20

40

80

20

4 8

40 60

12

80

16

180

160

140

120

100

80PS

IHE

AD

120

160

200

240

200

100

- UK GPM2820

120

24

140

32

- L/MIN

600

500

400

300

FEE

TH

EA

D

0

370 M /hr(41.2 CFM)

314 M /hr(8.2 CFM)

358 M /hr(34.2 CFM)

350 M /hr(29.4 CFM)

325 M /hr(14.7 CFM)

340 M /hr AIR CONSUMPTION(23.5 CFM)

1.5 Bar(21.7 psi)

2.0 Bar0(29. psi)

. a3 0 B r3 5 ps

(4 .i)

.0 Ba4

r(58 psi)

5 Ba.0 r(7(7 .5 p i2

s )

6.0 Bar(87 p i)s

7.0 BBar((10 .si)

1 5 p

8a A R

RESRE

.0 Br

IP

SU

6i)

((11ps

TYPICAL CODE = B25. 05. AA. W3. NNS

MODEL - B25: Series 00 X25: ATEX Approved

DESIGN LEVEL

WETTED COMPONENTSA: ALUMINUMS: 316 STAINLESS STEEL

VALVE SEATSS: 316 STAINLESS STEEL

VALVE BALLST: PTFEN: NEOPRENEB: BUNA-NE: EPDMS: STAINLESS STEELV: VITON

DIAPHRAGMST: PTFEN: NEOPRENEB: BUNA-NR: SANTOPRENEE: EPDMH: POLYESTER (HYTREL)O: ONE PIECE PTFEP: POLYURETHANEV: VITON

NON-WETTED COMPONENTSA: ALUMINUM

VALVE TYPEB: BALLW: WEIGHTED

MODEL DESIGNATION

Dimensions

Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.

Page 20: PROVEN - Pump & PackageATEX GOST-R EHEDG CE FDA Uses advanced technology to complete full diaphragm expansion using up to 50% less air while maintaining fl ow. AODD pumps fully expand

PROVEN PERFORMANCE • RELIABLE PUMPING SOLUTIONS20

HYGIENIC SERIESB25B25

• • Range of DIN/RJT and Ferrule connections• • Self priming, ideal for emptying containers• • Food grade elastomers-EPDM/PTFE• • Pressures to 8.6 bar (125 PSI)• • Capable of handling high viscosity & S.G.• • Certifi ed CIP cleanable• • EU Design approval• • 316L Stainless Steel

Technical Data

HYGIENIC SERIES B25STAINLESS STEEL

Performance Curve

Maximum Delivery: 136 ltrs/min (36 gal/min)Max. Working Pressure: 8.6 bar (125 PSI)Max. Solid Particle Size: 5 mm. (0.2”)Air Inlet: 3/8” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 4.6 m. (15.1’)Suction Lift (Wet): 6.1 m. (20’)Fluid Inlet/Outlet: 1” RJT Installation: Wall or surface mountedAccessories Included: Exhaust air Silencer

Shipping Weights:Stainless Steel 21.5 kg. (47.4 lbs.)

Shipping Dimensions: 450 x 280 x 500 mm. (17.7” x 11” x 19.7”)

160 126.5

SUNCTIONINLET1” MALE RJT

DISCHARGE OUTLET1” MALE RJT

AIR INLET3/8” BSP(F)

SILENCER1/2” BSP

223AIR INLET

160220

55

432

226413

108187

356

4 MOUNTING HOLES Ø 9

FLUID FLOW RAATETEAAAA

10

20

30

40

50

60

70

80

ME

TRE

SH

EA

D

20

40

60

80

100

120

PS

IHE

AD

FEE

TH

EA

D

85

50

100

150

200

250

279

2020 4040 6060 80 100100 120120 140 160 L/MIN

4 168 12 2020 24 - UK GPPM28 32

365 M /hr(38 CFM)

3.00 ararBB( 3 5 psi)4 .

4.0 arB58 p i)( s

5.0 Bar(72.5 psi)

B6.0 ar(8 s7 p i)

7 0 Ba. r0 5 p i)(1 1. s

320 M /hr(11.7 CFM)

340 M /hr(23.5 CFM)

330 M /hr AIR CONSUMPTION(17.6 CFM)

Bar IS UU

8.0A R PRE S RRE

16i)

(1ps

.0 Bar2(29.0 psi)5 r1. Ba

.(21 7 psi)

TYPICAL CODE = B25. ZF. BB. EEE -LF

MODEL - B15: Standard X15: ATEX Approved LUBE FREE

WETTED COMPONENTSZ: 316 STAINLESS STEEL (ELECTRO POLISHED)

VALVE SEATSE: FOOD GRADE EPDMS: 316 STAINLESS STEEL

VALVE BALLSE: FOOD GRADE EPDMT: PTFES: 316 STAINLESS STEEL

DIAPHRAGMSE: FOOD GRADE EPDMT: PTFE

NON-WETTED COMPONENTSS: 316 STAINLESS STEELF: NICKEL PLATED ALUMINUM

VALVE TYPEB: BALL

SUCTION ORIENTATIONB: BOTTOM

Dimensions

Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.

Page 21: PROVEN - Pump & PackageATEX GOST-R EHEDG CE FDA Uses advanced technology to complete full diaphragm expansion using up to 50% less air while maintaining fl ow. AODD pumps fully expand

WWW.BLAGDONPUMP.COM 21

METALLIC SERIES B40B40

*Pumps with cast iron wetted components are supplied at design level 01.

• • Simple construction, easy to maintain• • Self priming, ideal for emptying containers• • Pressures to 8.6 bar (125 PSI)• • Flow rates up to 320 litres/minute (85 gal/min)• • Bolted construction for greater integrity• • Reliable, proven pneumatic air valve system

Technical Data

METALLIC SERIES B40 ALUMINUM, CAST IRON, STAINLESS STEEL

Performance Curve

Maximum Delivery: 320 ltrs/min (85 gal/min)Max. Working Pressure: 8.6 bar (125 PSI)Max. Solid Particle Size: 6 mm. (0.24”)Air Inlet: 3/8” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 6.1 m. (20’)Suction Lift (Wet): 7.6 m. (24.9’)Fluid Inlet/Outlet: 1 1/2” BSP / NPTInstallation: Surface mountedAccessories Included: Exhaust air Silencer

Shipping Weights:Aluminum 22 kg. (48.5 lbs.)Stainless Steel/Aluminum 36 kg. (79.4 lbs.)Stainless Steel 46 kg. (101.4 lbs.)Stainless Steel/Cast Iron 46 kg. (101.4 lbs.)Cast Iron/Aluminum 51.4 kg. (113.3 lbs.)Cast Iron 61 kg. (134.5 lbs.)

Shipping Dimensions: 500 x 350 x 600 mm. (19.7” x 13.8” x 23.6”)

204178

FLUID SUCTIONINLET 1”1/2 BSP

AIR INLET3/8” BSP

FLUID DISCHARGEOUTLET 1”1/2 BSP

SILENCER1/2” BSP(M)

271AIR INLET

270

441243

117.5

549

486 IN-LINE MANIFOLD

470

4856

251

13 SLOT

FLUID FLOW RATEAA

10

20

30

40

50

60

70

80

ME

TRE

SH

EA

D

50

100

150

20

40

60

80

100

120

PS

IHE

AD

FEE

TH

EA

D

200

250

85 279

- L/MIN50 100 150 200 250 300 3500

0 10 3020 5040 8060 - UK GPM70

360 M /hr AIR CONSUMPTION(35.3 CFM)

320 M /hr(11.7 CFM)

390 M /hr(53 CFM)

3100 M /hr(58.8 CFM)

3115 M /hr(67.5 CFM)

380 M /hr(47 CFM)

RRR

S

E

8.0 Bar AAIIP

ESUR

( 11 6 psi)7.0 Bar(1.5

si)

01p

6.0 Bar(87 psi)

5.0 Bar72.i

( 5 ps )4.0 Bar(58 psi)

3.0 Bar5 s

(43. p i)

2 0. Bar29 psi)

( .0B1.5 ar21.( 7 psi)

340 M /hr(23.5 CFM)

TYPICAL CODE = B40. 05. AA. BB. BBS -LF

MODEL - B40: Standard X40: ATEX Approved

DESIGN LEVEL

LUBE FREE

WETTED COMPONENTSA: ALUMINUMC: CAST IRONS: 316L STAINLESS STEEL

VALVE SEATSB: BUNA-N A: ALUMINUME: EPDM V: VITONN: NEOPRENE S: 316 STAINLESS STEEL

VALVE BALLSB: BUNA-N T: PTFEE: EPDM V: VITONN: NEOPRENE S: 316 STAINLESS STEEL

DIAPHRAGMSB: BUNA-N P: POLYURETHANE E: EPDM R: SANTROPENEH: POLYESTER T: PTFEN: NEOPRENE V: VITONO: ONE PIECE PTFE

NON-WETTED COMPONENTSA: ALUMINUMC: CAST IRONS: 316L STAINLESS STEEL

VALVE TYPEB: BALLW: WEIGHTED

SUCTION ORIENTATIONB: BOTTOM

The above drawing shows Aluminum and Cast Iron only.

Dimensions

Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.

Page 22: PROVEN - Pump & PackageATEX GOST-R EHEDG CE FDA Uses advanced technology to complete full diaphragm expansion using up to 50% less air while maintaining fl ow. AODD pumps fully expand

PROVEN PERFORMANCE • RELIABLE PUMPING SOLUTIONS22

MOULDED NON-METALLIC SERIESB50B50

• • Simple construction, easy to maintain• • Capable of handling high S.G. and viscous fl uids• • Pressures to 8.6 bar (125 PSI)• • Flow rates up to 530 litres/minute (140 gal/min)• • Flanged end connections• • Reliable, proven pneumatic air valve

Technical Data

MOULDED NON-METALLIC SERIES B50 POLYPROPYLENE & PVDF

Performance Curve

Maximum Delivery: 530 ltrs/min (140 gal/min)Max. Working Pressure: 8.6 bar (125 PSI)Max. Solid Particle Size: 6 mm. (0.24”)Air Inlet: 3/4” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 6.1 m. (20’)Suction Lift (Wet): 7.6 m. (24.9’)Fluid Inlet/Outlet: 2” ANSI #150 Flanged RFInstallation: Surface mountedAccessories Included: Exhaust air Silencer

Shipping Weights:Polypropylene/Aluminum 39.5 kg. (87.1 lbs.)PVDF/Aluminum 50.5 kg. (111.3 lbs.)Polyporpylene/Stainless Steel 50.5 kg. (111.3 lbs.)PVDF/Stainless Steel 70 kg. (154.3 lbs.)

Shipping Dimensions: 630 x 380 x 670 mm. (24.8” x 15” x 26.4”)

234280

324

620

289AIR INLET

AIR INLET3/4” BSP(F)

DISCHARGE OUTLET2” ANSI 150 FLANGE

AIR EXHAUST3/4” BSP(F)

SUCTION INLET2” ANSI150 FLANGE

139

321561

617

14880

464

FEE

TH

EA

D

PS

IHE

AD

ME

TRE

SH

EA

D

FLUIDD FFLOW RATEAA

00 20 40

20

40

60

00 5050 100100

1010

20

200200150150 250

3030

40

- UK GPM6060 80 1000

550 - L/Min

131

98

66

33

350350300300 400400 500450

80

100

120

60

50

70

80 262

229

197

164

1220

340 M /hr AIR CONSUMPTION(23.5 CFM)

330 M /hr(17.5 CFM) 360 M /hr

(35 CFM)

380 M /hr(47 CFM)

3100 M /hr(59 CFM)

3140 M /hr(82.5 CFM)

320 M /hr(12 CFM)

.00 BB rr4

a((55 psi)8

3 aa.0 BB rr4444 5.5 psi

(((( 33))

B1.5 ar1.1.(2( 777 psi)psi)

2 0. BBarar29 psi))))

(( .0

8.0 Bar AIR PRREESSSSUURE

( 16 p i)1

s

.0a

7B rr((1

.5i

01ps )

6.0 Bar(87 psi)

.0 Baa5

rr2. p i

(75

s )

TYPICAL CODE = B50. 05. PT. BB. EEP -LF

MODEL - B50: Standard X50: ATEX Approved

DESIGN LEVEL

LUBE FREE

WETTED COMPONENTSP: POLYPROPYLENEK: KYNAR (PVDF)G: CONDUCTIVE POLYPROPYLENE

VALVE SEATSB: BUNA-N T: PTFEE: EPDM V: VITONN: NEOPRENEP: POLYPROPYLENE

VALVE BALLSB: BUNA -N T: PTFE E: EPDM V: VITONN: NEOPRENES: 316 STAINLESS STEEL

DIAPHRAGMSB: BUNA -N T: PTFE E: EPDM V: VITONH: POLYESTER (HYTREL)N: NEOPRENEP: POLYPROPYLENER: SANTOPRENEO: ONE PIECE PTFE

NON-WETTED COMPONENTST: ALUMINUM / EPOXY PAINTEDW: STAINLESS STEEL / EPOXY PAINTED

VALVE TYPEB: BALLW: WEIGHTED

SUCTION ORIENTATIONB: BOTTOM

Dimensions

*X Series ATEX pumps are ONLY applicable to Conductive Polypropylene pumps.

Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.

Page 23: PROVEN - Pump & PackageATEX GOST-R EHEDG CE FDA Uses advanced technology to complete full diaphragm expansion using up to 50% less air while maintaining fl ow. AODD pumps fully expand

WWW.BLAGDONPUMP.COM 23

METALLIC SERIES B50B50

• • Air valve designed for in-line maintenance• • End ported for improved fl ow• • Pressures to 8.6 bar (125 PSI)• • Flow rates up to 530 litres/minute (140 gal/min)• • Bolted construction for greater integrity• • Robust construction

Technical Data

METALLIC SERIES B50ALUMINUM & CAST IRON

Performance Curve

Maximum Delivery: 530 ltrs/min (140 gal/min)Max. Working Pressure: 8.6 bar (125 PSI)Max. Solid Particle Size: 6 mm. (0.24”)Air Inlet: 3/4” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 6.1 m. (20’)Suction Lift (Wet): 7.6 m. (24.9’)Fluid Inlet/Outlet: 2” BSP / NPTInstallation: Surface mountedAccessories Included: Exhaust air Silencer

Shipping Weights:Aluminum 38 kg. (83.8 lbs.)Cast Iron/Aluminum 63 kg. (138.9 lbs.)Cast Iron 90 kg. (198.4 lbs.)

Shipping Dimensions: 540 x 350 x 750 mm. (12.3” x 13.8” x 29.5”)

256 118.5

625578 CRS

14 4760

460229 CRS

20 SLOT DEPTH

SUCTION INLET2” BSP

AIR INLET3/4” BSP

340AIR INLET/EXHAUST

254127

663

139

316246.5

493 IN-LINE OPTIONDISCHARGE OUTLET2” BSP

FEE

TH

EA

D

PS

IHE

AD

ME

TRE

SH

EA

D

FLUID FLOW RATEAA

0 20 40

20

40

60

0 50 100

10

20

200150 250

30

40

- UK GPM60 80 100

550 - L/Min

131

98

66

33

350300 400 500450

80

100

120

60

50

70

80 262

229

197

164

120

340 M /hr AIR CONSUMPTION(23.5 CFM)

330 M /hr(17.5 CFM) 360 M /hr

(35 CFM)

380 M /hr(47 CFM)

3100 M /hr(59 CFM)

3140 M /hr(82.5 CFM)

320 M /hr(12 CFM)

.0 B rr4

a((55 psi)8

3 aa.0 BB rr44 .5 psi

(( 3))

B1.5 ar1.(2 77 psi)

2 0. BBarar29 psi)))

(( .0

8.0 Bar AIR PRREESSSSUURE

( 16 p i)1

s

.0a

7B rr((1

.5i

01ps )

6.0 Bar(87 psi)

.0 Baa5

rr2. p i

(75

s )

TYPICAL CODE = B50. 05. AA. BB. BBB -LF

MODEL - B50: Standard X50: ATEX Approved

DESIGN LEVEL

LUBE FREE

WETTED COMPONENTSA: ALUMINUMC: CAST IRON

VALVE SEATSB: BUNA-N A: ALUMINUME: EPDM T: PTFEN: NEOPRENE S: 316 STAINLESS STEEL

VALVE BALLSB: BUNA-N T: PTFEE: EPDM V: VITONN: NEOPRENE S: 316 STAINLESS STEEL

DIAPHRAGMSB: BUNA-N P: POLYURETHANE E: EPDM R: SANTROPENEH: POLYESTER T: PTFEN: NEOPRENE V: VITONO: ONE PIECE PTFE

NON-WETTED COMPONENTSA: ALUMINUMC: CAST IRON

VALVE TYPEB: BALLW: WEIGHTED

SUCTION ORIENTATIONB: BOTTOM

Dimensions

Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.

Page 24: PROVEN - Pump & PackageATEX GOST-R EHEDG CE FDA Uses advanced technology to complete full diaphragm expansion using up to 50% less air while maintaining fl ow. AODD pumps fully expand

PROVEN PERFORMANCE • RELIABLE PUMPING SOLUTIONS24

METALLIC SERIESB50B50

• • Simple construction, easy to maintain• • Self priming, ideal for emptying containers• • Pressures to 8.6 bar (125 PSI)• • Flow rates up to 530 litres/minute (140 gal/min)• • Bolted construction for greater integrity• • 316 stainless steel

Technical Data

METALLIC SERIES B50STAINLESS STEEL

Performance Curve

Maximum Delivery: 530 ltrs/min (140 gal/min)Max. Working Pressure: 8.6 bar (125 PSI)Max. Solid Particle Size: 6 mm. (0.24”)Air Inlet: 3/4” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 6.1 m. (20’)Suction Lift (Wet): 7.6 m. (24.9’)Fluid Inlet/Outlet: 2” BSP / NPTInstallation: Surface mountedAccessories Included: Exhaust air Silencer

Shipping Weights:Stainless Steel/Aluminum 70 kg. (154.3 lbs.)Stainless Steel 95.5 kg. (210.5 lbs.)Stainless Steel/Cast Iron 95.5 kg. (210.5 lbs.)

Shipping Dimensions: 630 x 380 x 670 mm. (24.8” x 15” x 26.4”)

130

260328

30

269AIR INLET

AIR INLET3/4” BSP(F)

FLUID OUTLET2” BSP(F)

FLUID INLET2” BSP(F)

169

381 110

64

579

590139

478

Ø8.7 HOLES THRO’ BASE LEG

FEE

TH

EA

D

PS

IHE

AD

ME

TRE

SH

EA

D

FLUID FLOW RFLO ATEAA

0 20 40

20

40

60

00 5050 100100

1010

20

200200150150 25025

3030

40

- UK GPM606 80 1000

550 - L/Min

131

98

66

33

350350300300 400400 5004450

80

100

120

60

50

70

80 262

229

197

164

120

340 M /hr AIR CONSUMPTION(23.5 CFM)

330 M /hr(17.5 CFM) 360 M /hr

(35 CFM)

380 M /hr(47 CFM)

3100 M /hr(59 CFM)

3140 M /hr(82.5 CFM)

320 M /hr(12 CFM)

.00 BB rr4

a((55 psi)8

3 aa.0 BB rr4444 5.5 psi

((( 33))

B1.5 ar1.(2 7777 psi)psi)

2 0. BBarar29 psi))))

(( .0

8.0 Bar AIR PRREESSSSUURE

( 16 p i)1

s

.0a

7B rr((1

.5i

01ps )

6.0 Bar(87 psi)

.0 Baa5

rr2. p i

(75

s )

TYPICAL CODE = B50. 05. SA. BB. BBS -LF

MODEL - B50: Standard X50: ATEX Approved

DESIGN LEVEL

LUBE FREE

WETTED COMPONENTSS: 316L STAINLESS STEEL

VALVE SEATSB: BUNA-N A: ALUMINUME:EPDM V: VITONN: NEOPRENE S: 316 STAINLESS STEEL

VALVE BALLSB: BUNA-N T: PTFEE: EPDM V: VITONN: NEOPRENE S: 316 STAINLESS STEEL

DIAPHRAGMSB: BUNA-N P: POLYURETHANE E: EPDM R: SANTROPENEH: POLYESTER T: PTFEN: NEOPRENE

NON-WETTED COMPONENTSA: ALUMINUMS: 316L STAINLESS STEEL

VALVE TYPEB: BALLW: WEIGHTED

SUCTION ORIENTATIONB: BOTTOM

Dimensions

Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.

Page 25: PROVEN - Pump & PackageATEX GOST-R EHEDG CE FDA Uses advanced technology to complete full diaphragm expansion using up to 50% less air while maintaining fl ow. AODD pumps fully expand

WWW.BLAGDONPUMP.COM 25

FULL FLOW HIGH PRESSURE B50B50

• • Robust construction, easy to maintain• • Can easily handle viscous, high S.G. and high head applications• • Smooth action, less vibration and wear• • Pressures to 16 bar (232 PSI)• • Flow rates up to 350 litres/minute (92 gal/min)• • Bolted construction for greater integrity• • Reliable pneumatic air valve• • Stalls against closed head without damage• • Re-start on demand

Technical Data

METALLIC SERIES- FULL FLOW 2:1 B50 STAINLESS STEEL, ALUMINUM

Performance Curve

Maximum Delivery: 350 ltrs/min (92 gal/min)Max. Working Pressure: 16 bar (232 PSI)Max. Solid Particle Size: 6 mm. (0.24”)Air Inlet: 3/4” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 6.1 m. (20’)Suction Lift (Wet): 7.6 m. (24.9’)Fluid Inlet/Outlet: 2” BSP / NPTInstallation: Surface mountedAccessories Included: Exhaust air Silencer

Shipping Weights:Stainless Steel/Aluminum 78 kg. (172 lbs.)Aluminum 52 kg. (114.6 lbs.)

Shipping Dimensions: 850 x 450 x 800 mm. (33.5” x 17.7” x 31.5”)

212577

130260320

67

280

595490

AIR INLET3/4” BSP(F)

FLUID INLET2” BSP(F)

FLUID OUTLET2” BSP(F)

SILENCER (FITTED)

3/4” BSP(M)

316729139

4 HOLES THRO’ Ø8.5

FEE

TH

EA

D

ME

TRE

SH

EA

D

100 231

200 250 3000 50 100 150

20

40

60

80

350 - L/min

46

92

138

185

110

90

10

20

30

40

50

60

70

80

100

130

120

140

150

160

PS

IHE

AD

120

140

160

180

200

220

277

323

369

416

462

508

FLUID FLOW RATEAA10 80 - UK GPM20 30 40 50 60 70

80B80

aAIR

ESSUREE

0000r

PR

11sii))

((6pp

aa7.0 BB rr.5 p i

(101s )

BB66.00

aarr7(8ppsi))

5.0 Barr72. p )(( 5 si

4.0arB(5 p i)

8 s3.0 Bar(4(43.5 ps )i

B r1.5 a1.(2 7 psi)

2.0 Bar2929.. p i)

( 0 0 s

330 M /hr(17.6 SCFM)

340 M /hrhr(23.5 CFM)F

3180 M /hr(106 CFM)

3160 M /hr(94 CFM)

390 M /hr(53 CFM)

365 M /hr(38 CFM)

3135 M /hr AIR CONSUMPTION(79.5 CFM)

TYPICAL CODE = B50. 05. SA. W3. BBS

MODEL - B50: Standard X50: ATEX Approved

DESIGN LEVEL

WETTED COMPONENTSA: ALUMINUMS: 316 STAINLESS STEEL

VALVE SEATSS: 316 STAINLESS STEELA: ALUMINUM

VALVE BALLST: PTFEN: NEOPRENEB: BUNA-NE: EPDMS: STAINLESS STEELV: VITON

DIAPHRAGMST: PTFEN: NEOPRENEB: BUNA-NR: SANTOPRENEE: EPDMH: POLYESTER (HYTREL)O: ONE PIECE PTFEP: POLYURETHANEV: VITON

NON-WETTED COMPONENTSA: ALUMINUM

VALVE TYPEB: BALLW: WEIGHTED

MODEL DESIGNATION

The above drawing shows Stainless Steel only.

Dimensions

Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.

Page 26: PROVEN - Pump & PackageATEX GOST-R EHEDG CE FDA Uses advanced technology to complete full diaphragm expansion using up to 50% less air while maintaining fl ow. AODD pumps fully expand

PROVEN PERFORMANCE • RELIABLE PUMPING SOLUTIONS26

HYGIENIC SERIESB50B50

DESIGN LEVEL

• • Range of DIN/RJT and ferrule connections• • Self priming, ideal for emptying containers• • Food grade elastomers-EPDM/PTFE• • Pressures to 8.6 bar (125 PSI)• • Capable of handling high viscosity & S.G.• • Certifi ed CIP cleanable• • EU Design approval• • 316L Stainless Steel• • Pump stand option for 180° rotation in place

Technical Data

HYGIENIC SERIES B50STAINLESS STEEL

Performance Curve

Maximum Delivery: 500 ltrs/min (132 gal/min)Max. Working Pressure: 8.6 bar (125 PSI)Max. Solid Particle Size: 10 mm. (0.39”)Air Inlet: 3/4” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 6.1 m. (20’)Suction Lift (Wet): 7.6 m. (24.9’)Fluid Inlet/Outlet: 2” RJT (Standard)Installation: Surface mountedAccessories Included: Exhaust air Silencer

Shipping Weight:Stainless Steel 64 kg. (141.1 lbs.)

Shipping Dimensions: 660 x 430 x 880 mm. (26” x 16.9” x 34.7”)

198

689

540270

30572

SUCTION INLET2” RJT - STANDARD OTHER OPTIONS AVAILABLE

90

714598

382AIR

EXHAUST

AIR EXHAUST

3/4” BSP

322225

Ø61 RUBBER MOUNTING PADS (M8 FIXING BOLTS)

AIR INLET3/4” BSP

DISCHARGE OUTLET - 2” RJT STANDARDOTHER OPTIONS AVAILABLE

382AIR INLET

FEE

TH

EA

D

ME

TRE

SH

EA

D

FLUID FLOW RW RAATEAA

PS

IHE

AD

10

0

20

30

40

50

60

70

80

100

0

20

40

60

80

120

00

0

100 - 00 - UK GPMUK GPM2020

100 200 300 400 500 - L/MIN0

33

66

99

131

164

197

230

262

4040 6060 8080

a77.00 B r(10000 psi)

a8.0 B r(

s )116 p i

4 1 a. B r6 p i( 0 s )

1 BaSS RE

.4 r AIR PRE U2 p( 0 si)

a22.77 BB r0 s(4 p i)

5.5 BBaar80 psii))(

330 M /hr(17.6 CFM)

370 M /hr(41 CFM)

3110 M /hr(65 CFM)

3150 M /hr AIR CONSUMPTION(88 CFM)

TYPICAL CODE = B50. 05. ZF. BB. EEE -LF

MODEL - B50: Standard X50: ATEX Approved LUBE FREE

WETTED COMPONENTSZ: 316 STAINLESS STEEL (ELECTRO POLISHED)

VALVE SEATSE: FOOD GRADE EPDMT: PTFE

VALVE BALLSE: FOOD GRADE EPDMT: PTFES: 316 STAINLESS STEEL

DIAPHRAGMSE: FOOD GRADE EPDMO: ONE PIECE PTFE

NON-WETTED COMPONENTSS: 316 STAINLESS STEELF: NICKEL PLATED ALUMINUM

VALVE TYPEB: BALL

SUCTION ORIENTATIONB: BOTTOM

Dimensions

FLUID FLOW RRAA

Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.

Page 27: PROVEN - Pump & PackageATEX GOST-R EHEDG CE FDA Uses advanced technology to complete full diaphragm expansion using up to 50% less air while maintaining fl ow. AODD pumps fully expand

WWW.BLAGDONPUMP.COM 27

Maximum Delivery: 901 ltrs/min (238 gal/min)Max. Working Pressure: 7 bar (102 PSI)Max. Solid Particle Size: 18 mm. (0.71”)Air Inlet: 3/4” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 5.1 m. (16.8’)Fluid Inlet/Outlet: 3” ANSI FlangeInstallation: Surface mountedAccessories Included: Exhaust air Silencer

Shipping Weights:Polypropylene 105 kg. (231.5 lbs.)PVDF 143 kg. (315.3 lbs.)

Shipping Dimensions: 558 x 965 x 1219 mm. (22” x 38” x 48”)

MOULDED NON-METALLIC SERIES B75B75

• • Simple construction, easy to maintain• • Capable of handling high S.G. and viscous fl uids• • Pressures to 7 bar (102 PSI)• • Flow rates up to 901 litres/minute (238 gal/min)• • Adjustable fl anged connections• • Reliable, proven pneumatic air valve

Technical Data

MOULDED NON-METALLIC SERIES B75 POLYPROPYLENE & PVDF

Performance Curve

Dimensions

0 20 40 60 80 100 120 140 160 180 200 220

85075065055045035025015050

100

90

80

70

60

50

40

30

20

10

0

1

2

3

4

5

6

7

0

30

2025

1015

5

9.1

67.6

34.5

1.5

20 (34)40 (68)

60 (102)80 (136)3

100 (170)1

120 (204)(2

140 238)(

CAPACITY

U.S. Gallons per minute

Liters per minute

BAR

PSI

HEA

D

NPS

HR

MET

ERS

FEET

))40 PSI (2.72 Bar)

20 PSI (1.36 Bar))I (1.36 Bar)

))

SI (5.44 (

80 PP0 PSI (5.44 Bar)

ssurerAir Inlet Pressuree

1000 PSI .8 Bar)(6.8 Bar)(6

)(6.8 Bar)

r)r)(4.08 B

60 PSIar))

60 PSI (4.08 Bar)

TYPICAL CODE = B75. 02. PT. BB. TTP -LF

MODEL - B75: Standard

DESIGN LEVEL

LUBE FREE

WETTED COMPONENTSP: POLYPROPYLENEK: PVDF

NON-WETTED COMPONENTST: ALUMINUM / EPOXY PAINTED

VALVE SEATSP: POLYPROPYLENEK: PVDF

VALVE BALLST: PTFER: SANTOPRENE

DIAPHRAGMST: PTFER: SANTOPRENE

VALVE TYPEB: BALLW: WEIGHTED

SUCTION ORIENTATIONB: BOTTOM

Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.

NEW

Page 28: PROVEN - Pump & PackageATEX GOST-R EHEDG CE FDA Uses advanced technology to complete full diaphragm expansion using up to 50% less air while maintaining fl ow. AODD pumps fully expand

PROVEN PERFORMANCE • RELIABLE PUMPING SOLUTIONS28

• • Air valve will not stall in mid position• • Air valve designed for in-line maintenance• • Available as both end and center ported• • Pressures to 7 bar (102 PSI)• • Flow rates up to 889 litres/minute (234.8 gal/min)• • Bolted construction for greater integrity• • Robust construction

BAARR

PSI

HEA

D

20(34) 40(68)60(102)

80(136)

100(170)

100

80

60

40

20

00

1

2

3

4

5

6

7

120(204)

1140(238)

00(6 8 B rr)

1 0 PSS . aaII

PS . 4 B8

I ((5 44 a00

r))

6 PP I(( 4. 8 ar)))0 SS 0 B

a0 P I ((2 22

4 S .77 B r))

r r u00 P ((1 6 B llePe e re

22 SI .3 a )) Ai IInn PP r ss

30

2025

1015

5

9.1

67.6

34.5

1.5

NPS

HR

MET

ERS

FEET

0

0

100

20

200

40

300

60

4000

80 1000 12020 140 160 180 200 220 240

500 600 700 800 900

Liters per mer inuteinute

CAPACITYYPP

U.S. . Gallons pper minute

3CFM (M /hr)

Maximum Delivery: 889 ltrs/min (234.8 gal/min)Max. Working Pressure: 7 bar (102 PSI)Max. Solid Particle Size: 10 mm. (0.4”)Air Inlet: 3/4” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 4 m. (13.1’)Fluid Inlet/Outlet: 3” BSP Tapered (End Ported) DIN Flanged (Center Ported)Installation: Surface mountedAccessories Included: Exhaust air Silencer

Shipping Weights:Aluminium 53.5 kg. (117.7 lbs.)Cast Iron/Aluminum 90 kg. (198 lbs.)Stainless Steel/Aluminum 90 kg. (198 lbs.)

Shipping Dimensions: 720 x 350 x 900 mm. (28.3” x 13.8” x 35.4”)

Technical Data

METALLIC SERIES B75

Performance Curve

TYPICAL CODE = B75. 01. AA. BB. BBB

MODEL - B75: Standard X75: ATEX Approved

DESIGN LEVEL

WETTED COMPONENTSA: ALUMINIUMC: CAST IRONS: STAINLESS STEEL

VALVE SEATSB: BUNA-N A: ALUMINIUME: EPDM T: PTFEN: NEOPRENE V: VITONS: 316 STAINLESS STEEL

VALVE BALLSB: BUNA-N T: PTFEE: EPDM R: SANTOPRENE N: NEOPRENE

DIAPHRAGMSB: BUNA-N V: VITONE: EPDM T: PTFEN: NEOPRENER: SANTOPRENE

NON-WETTED COMPONENTSA: ALUMINIUMC: CAST IRON

VALVE TYPEB: BALLW: WEIGHTED

SUCTION ORIENTATIONB: BOTTOM

Dimensions

Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.

422

129

60

200

257

3/4” BSPAIR INLET

1” BSPEXHAUST

149

701

298

761

16

815

327

435

577

184

305

367

62

10

METALLIC SERIESB75B75

*End ported version only available in aluminum and cast iron, and center ported versions only available in stainless steel.

Page 29: PROVEN - Pump & PackageATEX GOST-R EHEDG CE FDA Uses advanced technology to complete full diaphragm expansion using up to 50% less air while maintaining fl ow. AODD pumps fully expand

WWW.BLAGDONPUMP.COM 29

AIRVANTAGE METALLIC SERIES AVB75AVB75

•• All bolted construction •• Ball check valves •• Durable diaphragm connecting rod •• Light weight - portable •• 90° - 180° manifold connection rotation •• Solids range +.25" (6mm) to .38" (9.65mm) •• Dry primes up to 20 feet of water •• Complete center section upgrade kits available

CAPPACACITYLiters pperer minute

BAR

PSI

HEA

D

100

80

60

40

20

00

1

2

3

4

5

6

7

0 20 40 60 80 100 120 140 160 180 200

9008007006005004003002001000

220 240 260U.S. Gallons per minute

10(17)20(34)

30(51))400((68)50(85)8

660(102)70070((119)

80080(136)

90(153)5

00 PSI (6.8 Bar)

100 PSI (6.8 Bar)

))80 P80 PSI (5.44 Bar)

60 PSI (4.08 Bar)

B )B40 PSI (2.72 Bar)

Maximum Delivery: 889 ltrs/min (235 gal/min)Max. Working Pressure: 8.6 bar (125 PSI)Max. Solid Particle Size: 9.65 mm. (.38”)Air Inlet: 3/4” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 6.1 m. (20’)Fluid Inlet/Outlet: 3” BSP Tapered (End Ported) DIN Flanged (Center Ported)Installation: Surface mountedAccessories Included: Exhaust air Silencer

Technical Data

METALLIC SERIES AVB75 & AVX75

Performance Curve

Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.

Visit the Blagdon AirVantage website at www.airvantagepump.com/blagdon to learn more about this award winning technology.

*End ported version only available in aluminum and cast iron, and center ported versions only available in stainless steel.

AVX75: ATEX Approved AVB75: Standard

NEW

Characteristics

Flui

d C

hara

cter

istic

sIn

stal

latio

nD

uty

Standard DutyAirVantage

Page 30: PROVEN - Pump & PackageATEX GOST-R EHEDG CE FDA Uses advanced technology to complete full diaphragm expansion using up to 50% less air while maintaining fl ow. AODD pumps fully expand

PROVEN PERFORMANCE • RELIABLE PUMPING SOLUTIONS30

Maximum Delivery: 265 ltrs/min (70 gal/min)Max. Working Pressure: 8.6 bar (125 PSI)Max. Solid Particle Size: 25 mm. (0.98”)Air Inlet: 1/2” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 5.8 m. (19’) Fluid Inlet/Outlet: 1” BSP Tapered / NPTInstallation: Surface mountedAccessories Included: Exhaust air Silencer

Shipping Weights:Aluminium 21 kg. (46.3 lbs.)Cast Iron 34 kg. (75 lbs.)Stainless Steel 36 kg. (79.4 lbs.)

Shipping Dimensions: 381 x 457 x 482 mm. (15” x 18” x 19”)

METALLIC SERIESX25X25

Technical Data

METALLIC SERIES X25

Performance Curve

TYPICAL CODE = X25. 01. CC. FT. BBS

MODEL - X25: ATEX Approved

DESIGN LEVEL

WETTED COMPONENTSA: ALUMINIUMC: CAST IRONS: STAINLESS STEEL

VALVE SEATSS: STAINLESS STEEL

VALVE FLAPSB: NITRILEN: NEOPRENER: SANTOPRENEP: POLYURETHANEH: HYTRELV: FKME: EPDM

DIAPHRAGMSB: NITRILER: SANTOPRENEN: NEOPRENEV: VITONE: EPDMH: HYTREL

NON-WETTED COMPONENTSA: ALUMINIUMC: CAST IRON

VALVE TYPEF: FLAP

SUCTION ORIENTATIONT: TOP

Dimensions

• • Bottom discharge ported for effi cient solids handling• • Air valve will not stall in mid position• • Air valve designed for in-line maintenance• • Pressures to 8.6 bar (125 PSI)• • Flow rates up to 265 litres/minute (70 gal/min)• • Bolted construction for greater integrity• • Flap Valve pump for line size solids handling

40 PSI

60 PSI

80 PSI

10(17)

20(34)

40(68)

30(51)

500 85)(8

100 PSIPSI(6.8 Bar)Bar

(2 72(2.72 BBar)

(4.08 Bar)

(5.44 Bar)ar)

(1.36 Bar)

100

80

60

40

200

00 10 20 30 40 50 60 70 80

0 100100757550502525 150125125 200175 225 250 275 275

BA

R

0

1

2

7

3

4

5

6

PS

I

20 PSI Air Inlet Pressurenlete

Liters pper mer minute

U.S. Galallons pper minute

CAPACITYCITY

HE

AD

AIR CONSUMPTIONSCFM (M3/hr3 )

16.73425

DISCHARGE PORT1" NPTF or

14.03356

5.80147

2.3860

10.80274

.7218

5.54141

2.3860

16.41417

(OPTIONAL 90AIR EXHAUST3/4" NPTM

SUCTION PORT1” NPTF or1” BSPF

PORT ROTATT TION)AA

Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.

NEW

Page 31: PROVEN - Pump & PackageATEX GOST-R EHEDG CE FDA Uses advanced technology to complete full diaphragm expansion using up to 50% less air while maintaining fl ow. AODD pumps fully expand

WWW.BLAGDONPUMP.COM 31

Maximum Delivery: 530 ltrs/min (140 gal/min)Max. Working Pressure: 8.6 bar (125 PSI)Max. Solid Particle Size: 50 mm. (1.97”)Air Inlet: 3/4” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 7.3 m. (24’)Fluid Inlet/Outlet: 2” NPTInstallation: Surface mountedAccessories Included: Exhaust air Silencer

Shipping Weights:Aluminium 39 kg. (86 lbs.)Cast Iron 76 kg. (167.6 lbs.)Stainless Steel 76 kg. (167.6 lbs.)

Shipping Dimensions: 406 x 584 x 584 mm. (16” x 23” x 23”)

METALLIC SERIES X50X50

Technical Data

METALLIC SERIES X50

Performance Curve

TYPICAL CODE = X50. 01. CC. FT. BBS

MODEL - X50: ATEX Approved

DESIGN LEVEL

WETTED COMPONENTSA: ALUMINIUMC: CAST IRONS: STAINLESS STEEL

VALVE SEATSS: STAINLESS STEEL

VALVE FLAPSB: NITRILEN: NEOPRENER: SANTOPRENEH: HYTRELP: POLYURETHANEV: FKME: EPDM

DIAPHRAGMSB: NITRILER: SANTOPRENEN: NEOPRENEE: EPDMV: FKM

NON-WETTED COMPONENTSA: ALUMINIUMC: CAST IRON

VALVE TYPEF: FLAP

SUCTION ORIENTATIONT: TOP

Dimensions

40 PSI

60 PSI

80 PSI

100 PSI

10

0

20

30

40

50

60

70

80

90

100

200 40 60 80 100 120 140 160

10(17) 20(34)30(51)

40(68)50(85)

60(101.9))

70(118.9)80(135.9)

90(152.9)

100(169.9)

150(254.9)

0 200 300 400 500 600

BA

R

100

0

1

2

3

4

5

6

7

PS

I

125(212.4)5(2

20 PSI Air IInlet PressureP en

Liters per minute

U.S. Gallons per minute

CAPACITY

AIR CONSUMPTION SCFM (M(( 3/hr)3

HE

AD

• • Simple construction, easy to maintain• • Self priming, ideal for emptying containers• • High quality investment cast design• • Pressures to 8.6 bar (125 PSI)• • Flow rates up to 530 litres/minute (140 gal/min)• • Bolted construction for safety• • Reliable pneumatic air valve system

Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.

9.819.81249249

19.8719.87505505

20.3020.30516516

OPTIONALOPTIONALVERTICALVERTICALSUCTIONSUCTION

PORTPORT

13.5513.55

2" NPT SUCTION PORT2" NPT SUCTION PORT

NEW

Page 32: PROVEN - Pump & PackageATEX GOST-R EHEDG CE FDA Uses advanced technology to complete full diaphragm expansion using up to 50% less air while maintaining fl ow. AODD pumps fully expand

PROVEN PERFORMANCE • RELIABLE PUMPING SOLUTIONS32

B 06B 06

Maximum Delivery: 998 ltrs/min (264 gal/min)Max. Working Pressure: 8.6 bar (125 PSI)Max. Solid Particle Size: 75 mm. (3”)Air Inlet: 1/2” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): 5.5 m. (18’)Fluid Inlet/Outlet: 3” ANSI FlangeInstallation: Surface mountedAccessories Included: Exhaust air Silencer

Shipping Weights:Aluminium 92 kg. (202.8 lbs.)

Shipping Dimensions: 533 x 965 x 939 mm. (21” x 38” x 37”)

METALLIC SERIESX75X75

• • Bottom discharge ported for effi cient solids handling• • Air valve will not stall in mid position• • Air valve designed for in-line maintenance• • Pressures to 8.6 bar (125 PSI)• • Flow rates up to 998 litres/minute (264 gal/min)• • Bolted construction for greater integrity• • Robust construction

Technical Data

METALLIC SERIES X75

Performance Curve

TYPICAL CODE = X75. 01. AA. FT. BBS

MODEL - X75: ATEX Approved

DESIGN LEVEL

WETTED COMPONENTSA: ALUMINIUM

VALVE SEATSS: STAINLESS STEEL

VALVE BALLSB: NITRILEN: NEOPRENER: SANTOPRENEH: HYTRELP: POLYURETHANE

DIAPHRAGMSB: NITRILER: SANTOPRENEN: NEOPRENE

NON-WETTED COMPONENTSA: ALUMINIUM

VALVE TYPEF: FLAP

SUCTION ORIENTATIONT: TOP

Dimensions

Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.

100

20

30

40

505

60

70

80

90

200 40 60 80 1000 1200 140 160 1800 200 220 240 260

20(34) 40(68)60(101.9)

80(135.9)

100(169.9)

60 PSSI

40 PSSI

20 PSI Air Inle reeSI Air Inlet Preessuressure

100

Liters ps per er mi tinute

U.S. GalG lonss per minute

CAPACIAC TY

0 100100 200200 300300 400400 50000 600600 70070 800 900 1000

AIR CONSUMPTION SCFM (M(( 3/hr)3B

AR

AR

HE

AD

0

1

2

3

4

5

6

7

PS

I

120(203.9)1120(203.9)

100 PSI0 PSI

80 PSI36.72933

29.51749

15.25387

3.7595

25.76654

3.7595

16.22412

4.25108

SUCTION PORT3" ANSI STYLE FLANGE (150#)

DISCHARGE PORT3" ANSI STYLE FLANGE (150#)

R 28

NEW

Page 33: PROVEN - Pump & PackageATEX GOST-R EHEDG CE FDA Uses advanced technology to complete full diaphragm expansion using up to 50% less air while maintaining fl ow. AODD pumps fully expand

WWW.BLAGDONPUMP.COM 33

AP50AP50SUBMERSIBLE CENTRIFUGAL PUMP

Performance Curve

• • Submersible• • Designed for underground use• • High intensity spark free• • Robust construction• • Modular construction, easy to maintain• • Spring loaded vanes for immediate start up• • Pumps solid particles up to 6mm• • Viton seal options for higher temperatures• • Integral baseplate/strainer• • Automatic overspeed control• • Integral oil reservoir - automatic lubrication

INDUSTRIES• • Mining• • Construction• • De-watering• • Sewage• • Well-pointing

Technical Data

SUBMERSIBLE CENTRIFUGAL PUMP

Maximum Delivery: 560 ltrs/min (148 gal/min)Max. Working Pressure: 8.6 bar (125 PSI)Max. Solid Particle Size: 6 mm. (0.24”)Air Inlet: 3/4” NPTTemperature Limits: Determined by ElastomersSuction Lift (Dry): N/ASuction Lift (Wet): N/AFluid Inlet/Outlet: 2” BSP / NPTInstallation: N/AAccessories Included: None

Shipping Weight:Cast Iron 33 kg. (72.8 lbs.)

Shipping Dimensions: 500 x 380 x 260 mm. (19.7” x 15” x 10.2”)

162

458

41

11

147

FLUIDOUTLET2” BSPT(F)

AIREXHAUST1” BSP(F)AIR INLET

3/4” BSP(M)

Ø 197 RIBBEDPUMP INLET

Ø 406 (16”) MINIMUMBOREHOLE DIAMETER

10

20

30

40

FLUID FLOW RATE

ME

TRE

S H

EA

D

PS

I HE

AD

FEE

T H

EA

D

50

7 B r2. a( 40 psi)

.a

1 4 B r AIR PRESSURE

s(20 p i)

4 r.1 Ba6

)( 0 psi

5.5 Bar (80 psi)

6.9 Bar(10

s0 p

i)

370 M /hr(41.2 CFM)

35 M /hr(20.6 CFM)

3

100 M /hr AIR CONSUMPTION(58.9 CFM)

3

35

30

120

25

100

20

80

15

60

10

40

520

0 0

20

50 100 150 200 250 300 350 400 450 500 550 600 - L/MIN

40 60 80 100 120 130 - UK GPM

Dimensions

Note: The above Performance Curve has been determined under the following conditions: fl ooded suction, pumping clean water through a calibrated electronic fl ow meter with pulsation dampener and silencer fi tted.

Page 34: PROVEN - Pump & PackageATEX GOST-R EHEDG CE FDA Uses advanced technology to complete full diaphragm expansion using up to 50% less air while maintaining fl ow. AODD pumps fully expand

PROVEN PERFORMANCE • RELIABLE PUMPING SOLUTIONS34

PUMP ACCESSORIES

• • Virtually pulsation free fl ows• • Steadier pressures• • Less vibration and noise• • Simple installation• • Variety of sizes and materials• • Automatically self changing

Pulsation Dampener

• • Batch Control• • Linkage to control equipment• • Greater process control• • 10 - 30v DC, PNPnormally open

Valve Block with Sensors• • Exclusive to Blagdon Pump• • Robust heavy duty design• • Suitable for arduousinstallations• • Safe for underground use - no aluminium

Oil Bottle Assembly

• • Maintains constant oil density with varying fl ow• • Remote installation for ease of maintenance• • Ensures clean, fi ltered air• • Can be controlled independently of other equiptment

• • Upgrade B75 and X75 pumps to AirVantage• • Simply install a complete air section kit

Filter Regulators

Center Section

Flanges• • ANSI 150 as standardalso available: • ANSI 300 • PN16 • Food Industry - RJT,DIN, TRI-CLAMP• • Ease of connections topipework systems

n

d

oo

o

cP

ol

controlP

tion free fl owss

as

suresand noise

ations

NEW

Page 35: PROVEN - Pump & PackageATEX GOST-R EHEDG CE FDA Uses advanced technology to complete full diaphragm expansion using up to 50% less air while maintaining fl ow. AODD pumps fully expand

WWW.BLAGDONPUMP.COM 35

WWW.BLAGDONPUMP.COM

The purpose of our website is to have as much information as possible available to our customers.

Also shown within the web pages are:

• • Chemical Resistance Charts• • Kit Revisions• • Index with Components and Drawings• • Viscosity Correction Curve• • Flow Rate Conversion Calculator• • Shipping Weights and Dimensions• • Blagdon Numbering System

Product LiteratureProduct specifi c literature is available which includes:• • Technical data• • Performance Curves• • Applicable industries/applications• • Available options

Visit Our Website Today

Page 36: PROVEN - Pump & PackageATEX GOST-R EHEDG CE FDA Uses advanced technology to complete full diaphragm expansion using up to 50% less air while maintaining fl ow. AODD pumps fully expand

BLAGDON PUMPR79 Shannon Industrial Estate, Shannon, Co. Clare, Ireland

Phone: +353 (0) 61 471933 • Fax: +353 (0) 61 [email protected]

www.blagdonpump.com

www.blagdonpump.com

bpprodbr-rev0312 © 2012 BLAGDON PUMP, All rights reserved.

IDEX Mexico Ejército Nacional #404-801Col. Chapultepec Morales,

C.P. 11570, México, D.F.Phone: +52 55 5255 1357

Fax: +52 55 [email protected]

www.idexcorp.com

IDEX de BrazilMunicipal dos Andradas Road – Building 8

Valinhos – São Paulo – BrazilPhone: +55 19 3871-3500

Fax: +55 19 [email protected]

www.idexcorp.com

LATIN AMERICA COMMERCIAL OPERATIONS

IDEX Asia Pacifi c Pte Ltd63 Hillview Avenue, #07-08,

Lam Soon Industrial Building, Singapore 669569Phone: +65-63146146Fax: +65-6764 4020

[email protected]

ASEAN COMMERCIAL OPERATIONS

IDEX Trading (SHANGHAI) CO., LTD.Room 3502-3505, Zhao Feng Plaza,

1027 Chang Ning Road, Shanghai 200050, ChinaPhone: +86-21-52415599

Fax: [email protected]

EAST ASIA COMMERCIAL OPERATIONS

IDEX India Pvt LtdSunteck Centre, 3rd fl oor, 37-40 Subhash Road

Vile Parle East, Mumbai-400 057, IndiaPhone: +91-22-6643 5500

Fax: +91-22-6678 [email protected]

www.idexcorp.com

WEST ASIA COMMERCIAL OPERATIONS

Warren Rupp, Inc.800 North Main StreetMansfi eld, Ohio 44901Phone: 419-524-8388

Fax: [email protected]

www.warrenrupp.com

NORTH AMERICACOMMERCIAL OPERATIONS

Viking Pump of Canada, Inc.661 Grove AvenueWindsor, OntarioN9A 6M3, Canada

www.vikingpumpcanada.com

Local Distributor

Distributors located globally – for channel partners please visit: