propulsion control system for fuel cell powered vehicles
Post on 05-Jul-2016
213 views
TRANSCRIPT
Patents
Conductance-enhancing
microstructures for bipolar plates Applhmt: 3M Innovative Properties Co, USA
Patent number: WO 01/82399
Reduced vehicle emissions using APU
fuel cell anode exhaust to feed ICE Applicant: DaimlerChtysler, Germany
Patent number: US 6311650
Ambient-pressure fuel cell with
maximized water retention Applicant: IFC, USA (now UTC Fuel Cells)
Patent number: US 63 12842
Fuel cell using exhaust gas pressure
to drive compressor Appkcant: Toyoda ~to~tic Loom Works, Japan
Patent number: US 63 12843
Macroporous flow-field assembly for
high current densities and voltages
at reduced gas flow rates Applicant: Dow Chemical, USA
Patent number: US 6312845
PEM fuel cell on semiconductor
wafer for power chips Applicant: Integrated Fuel Cell Technologies
Inc, USA
Patent number: US 6312846
Fuel cell base tube with increased
gas permeability and cell electrical
e~icien~ Applicant: Mitsubishi Heavy Industries, Japan
Patent number: US 63 12847
Measuring stack cell voltages Applicant: Plug Power, USA
Patent number: US 63 13750
CO removal using hybrid adsorption/
selective catalytic oxidation Applicant: Honeywell, USA
Patent number: WO 01/83365
Pulsed humidification of membranes
in a PEMFC assembly Applicant: ABB, Sweden
Patent number: WO 0 1 I84658
Simplified fuel cell with integrated
components for improved
interaction between subsystems Applicant: Ballard Generation Systems, Canada
Parerzt number: US 63 I6 134
Direct antifreeze cooling eliminates
need for sealed coolant system Applicant: IX, USA (now UTC Fuel Cells)
Patent number: US 6316135
Enamel coating interconnector for
high-temperature fuel cells Applicant: Stdzer Hexis, Switzerland
Patent number: US 6316136 ‘,
Stack cooling by pumping non-
conducting coolant with freezing
point well below that of water Applicant: Plug Power, USA
Patent number: US 6316137
Simplified SOFC with minimized
electrical resistance and reduced
manufacturing cost AppLeant: Mitsubishi Heavy Industries, Japan
Patent number:US 6316138
Low-cost PEMFC gasket with highly
chemical-resistant elastomer layer Applicant: Matsushita Electric Industrial, Japan
Patent number: US 6316139
Efficient hydrogen generation by
metal hydride/alcohol reaction Applicant: McGill University, Canada
Patent number: WO 01185606
electrically conducive resin for fuel
cell separators Applicant: NOK Corporation, Japan
Patent number: WO 01185849
Fuel cell with heater wires through
electrolyte lattice Applicant: Honda Motor Co, Japan
Patent number: WO 01186744
Cold-starting using catalytic reaction heating elements in stack Appleant: Siemens, Germany
Patent number: WO 0 I186745
~anostructured MEA with
microtextures for increased effective catalyst surface density Applicant: 3M Innovative Properties Co, USA
Patent number: US 6319293
Hydrogen-selective metal membrane
modules for hydrogen purification Applicant: IdaTech, USA
&tent number: US 63 19306
High-performance transition metal
perovskite SOFC electrocatalyst Applicant: Dow Chemical, USA
Patent number: US 63 19626
Propulsion control system for fuel
cell powered vehicles Applicant: Delphi Technologies, USA Patent number: US 6321145
SOFCs with symmetric composite
electrodes Applicant: Corning, USA
Patent number: WO 01/89010
Reliable, simple, fuel cell structure
to avoid exhaust gas contamination Applicant: British Nuclear Fuels, UK
&tent number: WO 01189011
Carbon nanotubular fiber composite
for fuel cell bipolar plates Applicant: Honeywell, USA
Patent number: WO 01189013
Power supply using fuel cell and
rechargeable storage battery for
improved output response Applicant: Toyota Motor .Corporation, Japan
Patent nzlmbeE WO 0 11890 15
ion-exchange membrane fuel cell Applicant: Avista Labs, USA
Patent number: WO 0 11890 16
High-pe~ormance SOFCs with good
resistance to thermal shock damage Applicant: Corning, USA
Patent number: WO 01/89017
SOFC with roughened nanocrystalline
electrolyte interface layer Applicant: Corning, USA
Patent number: WO 01/89018
PEl6iFC stack with frame elements
for inexpensive manufacturing Applicant: Atecs ,M~nesm~n AG, Germany
Patent number: WO 01189019
Magnetic composites for improved species transport and separation Applicant: University of Iowa, USA
Patent number: US 6322676
Fuel cell energy conversion with integrated hydrogen production Applicant: DCH Technology, USA
Patent number: US 63 16133
@ Fuel Cells Bulletin No. 42