prompt flex birthing simulator - limbs & things
TRANSCRIPT
l imbsandthings.com
FOR MORE SKILLS TRAINING PRODUCTS VISIT
Sussex Street, St Philips, Bristol, BS2 0RA, UK | [email protected] | +44 (0) 117 311 0500
USER GU IDE
PROMPT FLEXBIRTHING SIMULATOR
ADVANCED
80106 80206
This product is available in light and dark skin tones
2
TAKE A LOOK AT OUR VIDEO
VISIT THE WEBSITE l imbsandthings.com
OR YOUTUBE CHANNEL
youtube.com/limbsandthings
INDEX
PACKAGE SUPPLIED 3
TEST CERTIFICATIONS 4
SAFETY & CLEANING INSTRUCTIONS 6
PROMPT FLEX BIRTHING SIMULATOR APP 7
• DOWNLOADING THE PROMPT FLEX BIRTHING SIMULATOR APP 7
• CHARGING YOUR WIRELESS FORCE MONITORING BABY 8
• CONNECTING YOUR BABY TO THE SOFTWARE 9
• USING THE PROMPT FLEX BIRTHING SIMULATOR SOFTWARE 11
SET UP PROMPT FLEX MODEL 13
• ADDING/REMOVING THE ABDOMEN 13
• FITTING/REMOVING THE CERVIX 14
• SETTING UP THE DIFFERENT DRILLS 15
TRAINING 16
• NORMAL BIRTH 16
• BREECH BIRTH 17
• SHOULDER DYSTOCIA 18
CLEANING & STORAGE 19
• ADDING/REMOVING PERINEUM 19
• REPLACE/CLEAN IM PADS 19
• TIGHTEN/LOOSEN THE LEGS 19
3
PACKAGESUPPLIED
BIRTHING PLACENTA
80123
WHEELED CARRY CASE
BIRTHING MOTHER
80120 80220
CERVIX
80126
PERINEUM & BIRTH CANAL
80125 80225
LUBRICANT
10193
PELVIC RING CLAMP BED STRAPS
80130
01000
WIRELESS FORCE MONITORING BABY
ABDOMEN
80124 80224
Lubricant Gel
80122FM 80222FM
80107 80207
4
We
Limbs and Things Ltd of
Sussex Street, St. Philips, Bristol, BS2 0RA
Declare under our sole responsibility that the product described below:
Brand and Model Name Limbs and Things Prompt Flex Birthing simulator, Part number: 80122, 80106, 80206, 80108, 80208, 80222, 80197, 80297, 80198, 80298, 80199 & 80299.
Has been tested and is in conformity with the following standards:
SUBJECT STANDARD Electrical Safety IEC 61010-1 Ed.3.0 and EN61010-1: 2010 Safety
requirements for electrical equipment for measurement, control and laboratory use.
Electromagnetic Compatibility
EN61326-1:2013 Electrical equipment for measurement, control and laboratory use. Emissions: EN55016-2-3:2006 EN61000-3-2:2006 +A1+A2 EN61000-3-3:2013 EN55011:2009+A1 (CISPR 11) Immunity: EN61000-4-2: 2009 EN61000-4-3: :2006 +A1 +A2 EN61000-4-4: 2004 EN61000-4-5: 2006 EN61000-4-6: 2009 EN61000-4-11:2004
Radio performance EN 300 328 V1.8.1:2012-06 RoHS 2 2011/65/EU
Thereby meeting the essential requirements of directive (RED) (2014/53/EU)
I hereby declare that the equipment named above has been designed to comply with the relevant sections of the above referenced Standards and meets all essential requirements of the RTTE Directive.
Signed Nicholas Hull Signature ............................................... Position Managing DirectorLocation Bristol, England Date 11 May 2020 .........................
EC DECLARATION OF CONFORMITY In accordance with ISO IEC 17050-1 : 2010
5
We
Limbs and Things Ltd of
Sussex Street, St. Philips, Bristol, BS2 0RA
Declare under our sole responsibility that the product described below:
Brand and Model Name Limbs and Things Prompt Flex Birthing simulator, Part number: 80122, 80106, 80206, 80108, 80208, 80222, 80197, 80297, 80198, 80298, 80199 & 80299.
Has been tested and is in conformity with the following standards:
Technical regulations 47CFR: 2008 Part 15, Sub Part C Intentional Radiators; Conducted (clause 15.207) and Radiated (clause 15.209) Emission Limits
Test laboratory York EMC services 46 Waverley Road Beeches Industrial Estate Yate Bristol BS37 5QT
Test report number B1726TR1 Test report date 9th June 2015
This product contains a Panasonic radio module PAN1026 which has been tested in accordance with the necessary standards. This device holds FCC ID: T7VPAN10
Signed Nicholas Hull Signature ............................................... Position Managing Director Location Bristol, England Date 11 May 2020 .........................
DECLARATION OF CONFORMITY
6
SAFETY & CLEANING
INSTRUCTIONS
DO’s
STORAGE & TRANSPORTATION
DON’Ts
Follow all instructions.Keep these instructions.Heed all warnings.
Do not install near any heat sources, do not expose the product to flames or use near naked flame sources.Do not use flammable solvents near or on this product.
Only use the lubricant supplied with this product. Use of non-recommended fluid products may weaken or damage the simulator.
Do not use any attachments other than those supplied by the manufacturer.
Wear gloves at all times and remove all jewellery items. Sharp surfaces such as finger nails and rings can lead to damage of silicone parts.
Clean the product with a damp soft cloth or sponge, using only warm water with mild detergent, after every training session. Clean off excess lubricant from all mother and baby surfaces.
Always ensure that the products are properly packed and secured during transportation and storage in order to prevent personal injury or damage to the product.
Do not wear any jewellery items.
Do not disassemble the product or attempt to repair a faulty unit, please return the product to Limbs & Things for assessment and repair.
READ THE SAFETY INSTRUCTIONS CAREFULLY BEFORE USING YOUR PROMPT FLEX BIRTHING SIMULATOR
Always lubricate the cervix, birth canal and baby before each birth.
Lubricant Gel
A poorly lubricated baby or placenta may damage the birth canal or the cervix
as it is pushed through.
Do not handle with wet hands or immerse in water or other liquids, this product contains electronics.
7
PROMPT FLEX BIRTHING
SIMULATOR APPDOWNLOADING THE PROMPT FLEX BIRTHING SIMULATOR APP
Download App at limbsandthings.com
Choose the download applicable to your device
WARRANTY
• We recommend that you check the contents of your product on arrival and store it in the appropriate manner.
• We recommend that you charge your baby’s battery fully on receipt and, if the baby is unlikely to be used for a long periods, charge it fully before storing it to maintain the health of the battery.
• We also recommend that you register your baby as soon as received, so that we have the contact details of the person responsible for the baby and can advise them of any important product updates.
• Limbs & Things warrants this product against defective materials and workmanship for 12 months from date of invoice and will replace or repair them free of charge.
THIS WARRANTY DOES NOT COVER damage resulting from:
1. Misuse, including but not limited to(a) failure to use the product for its intended use or in accordance with Limbs & Things’ instructions on the proper use and maintenance, and(b) installation or use of the product in a manner inconsistent with the technical or safety standards in force in the country where it is used and(c) improper or incorrect installation of software
2. Repairs done by the customer himself3. Defects of any system into which this product is incorporated4. Damage resulting from use of non Limbs & Things approved accessories5. Scratching or damage to all plastic surfaces and other externally exposed parts due to normal customer use
8
CHARGING YOUR BABY
3
WIRELESS FORCE MONITORING BABY Technical Specif icat ion
Run Time 10 Hours (approximately)
Charge Time (from flat) 4-5 Hours (approximately)
Standby Time 40 Days
Auto Power-Off 2 Minutes
Maximum Load (force) 500 Newtons
Charger Cradle Supply (Dock) Rating 12V DC,500mA
Charging...
1 Connect 2 Power going to the dock
4 Fully charged
PROMPT FLEX BIRTHING
SIMULATOR APP
9
CONNECTING THE BABY WITH THE SOFTWARE
Swich ON the Baby Enable Bluetooth on your device
Bluetooth
PROMPTFLEX_XXXXXX
MY DEVICES
Add PROMPTFLEX_XXXXXX to your device
Open the PROMPT Flex App Press Connect your baby
1 2
3
4 5
PROMPT FLEX BIRTHING
SIMULATOR APP
10
Press Rescan if your baby doesn’t appear
You may need to select ‘Rescan’ several times before you succesfully connect to your baby
The first time you connect your baby with the software, the Register your baby screen will launch.
You need to have an internet connection when registering the baby
The email address you give us here will be used to advise you of any future product upgrades
Registration information cannot be edited
(Flashing light)
Click Connect
Your baby will be identified by the last 6 digits of its serial number
76
CONNECTING THE BABY WITH THE SOFTWAREPROMPT FLEX
BIRTHING SIMULATOR APP
11
Drill/Meter mode
USING THE PROMPT FLEX SIMULATOR SOFTWARE
• 6 PRE-PROGRAMMED DELIVERY SCENARIOS:
1. Normal Birth 4. Forceps2. Shoulder Dystocia 5. Vacuum-assisted Birth3. Vaginal Breech Birth 6. Third Stage of Labour
• TIME, FORCE & INTERVENTIONS can be recorded
• Records the amount of FORCE in Newtons being applied to the baby’s head during delivery
• Gives a reading and plots on a bar graph
• Allows you to monitor the force applied to the baby outside of the context of a scenario
PROMPT FLEX BIRTHING
SIMULATOR APP
12
USING THE PROMPT FLEX SIMULATOR SOFTWARE
Exploring the Software without a Baby connected
To demonstrate full functionality in Drill mode, you should choose the Shoulder Dystocia scenario
You can view and download the latest FAQs, User Guide and product literature on our website limbsandthings.com
If your question is not answered in this document, please contact our Customer Services team by one of the methods below. It will greatly assist us in answering your query if you give us the following information:
• Your baby’s serial number (beginning 80122 and embossed on the side of the baby) • The platform and device you are using (eg. Windows 7 HP Laptop) • The software version you are using (displayed in Settings/System Information) • The firmware version on your baby (displayed in Settings/System Information)
PROMPT FLEX BIRTHING
SIMULATOR APP
13
SET UPPROMPT FLEX
MODELADDING/REMOVING THE ABDOMINAL SKIN
The abdomen can be added/removed easily to facilitate correct positioning of the baby within the pelvis if necessary.
Tighten the straps if necessary to secure the model to the table top.
14
REMOVING THE CERVIX
DRILLS CERVIX REQUIRED
Normal Birth üBreech Birth ûO.V.D. ûShoulder Dystocia û
SET UPPROMPT FLEX
MODEL
1
2
3
15
SETTING UP THE DIFFERENT DRILLS
Always lubricate before each birth.
SET UPPROMPT FLEX
MODEL
NORMAL BIRTH
Connect Placenta to umbilical cord
Lubric
ant
Gel
Lubric
ant
Gel
Lubric
ant
Gel
Lubric
ant
Gel
Lubric
ant
Gel
Lubric
ant
Gel
Lubric
ant
Gel
Lubric
ant
Gel
Lubric
ant
Gel
EXTENDED BREECH BIRTH SHOULDER DYSTOCIA
16
TRAINING NORMAL BIRTH
Push the baby through the pelvis, rotating the baby as appropriate to mimic the mechanism of normal delivery.
17
TRAINING EXTENDED BREECH BIRTH
Push on the head to simulate contractions and maternal effort. Ensure the baby’s arms remain flexed during the delivery.
18
TRAINING SHOULDER DYSTOCIA
Ensure that the anterior shoulder of the baby is wedged behind the symphysis pubis.
19
After each training session, clean all the lubrication from all mother and baby surfaces with a warm damp cloth.
CLEANING & STORAGE ADDING/REMOVING PERINEUM
REPLACE/CLEAN IM PADS TIGHTEN/LOOSEN THE LEGS
Part No: 365-522
Issue 01, August 2020© 2020 Limbs & Things
ADDITIONAL MODULES ALLOW YOU TO TAILOR YOUR TRAINING NEEDS
CERVICALDILATATION & EFFACEMENT
COMPRESSION SUTURE UTERUS
CERVICALCERCLAGE
PPH
C-SECTION
PERINEAL REPAIR TRAINER
PROMPT FLEX LOWER LEGS