These accessories and more are available from your local authorized distributor,

or Call: 724-941-0941 or Click online at www.promaxxtool.com.

ProBushing ™-Small(PPB2125/PMXPPB2125)Precision Hardened Steel Drill Bushing. Included in ProMAXX® both Base and ProKits™. Use only with SSSC125/PMXSSSC125 ProDrill™ tooling bit and PPT125/PMXPPT125 ProTractor™. Buy Today, Only $25.00 Made in USA.

ProBushing™ - Medium(PPB2188/PMXPPB2188)Precision Hardened Steel Drill Bushing. Optional with all kits except Rocky™ II 200 & Mikey™ 200 Series, utilize for more challenging stud extraction cases. Use only with SSSC188D/PMXSSSC188 ProDrill™ tooling bits and PPT188/PMXPPT188 ProTractor™. Highly recommended for Ford 6.8L V-10 and Ford/lNTL. 6.0L/6.4L diesel engines. Buy Today, Only $25.00 Made in USA.

ProBushing™ - Large(PPB2270/PMXPPB2270)Precision Hardened Steel Drill Bushing. Optional: Use only with SSSC270/PMXSSSC270 ProDrill™ tooling bits. Use for extreme cases where necessary to remove the entire damaged remnant. Leave the factory cylinder head threads untouched. Follow with optional ProBushing™ PPB2320 and ProTap™ PPT008 for restoring factory tapped holes for fast and efficient pair. Buy Today, Only $25.00 Made in USA.

ProBushing™ - Tap (PPB2320/PMXPPB2320)Precision Hardened Steel Drill Bushing. Op-tional: Use only with PPT008/PMXPPT008 ProTap™ following SSSC270/PMXSSSC270 ProDrill™ machine tooling. Provides precise angularity and perpendicularity. Use for cleaning factory tapped holes or for extractor-less repairs -fast and efficient! Buy Today, Only $25.00 Made in USA.

ProDrill™ (SSSC125T/PMXSSSC125) Superior quality machine tooling made from M42 cobalt. Micro-edge for walk-free machining and quick penetration. Short length for tight areas, thin web for fast clean drilling and chip clearing. Most bits stop cutting at Rc35, these will cut even harder metals up to and including Rc55 and titanium. Compatible with PPT125/PMXPPT125 ProTractor™. Meets and exceeds most tooling specifications including Aerospace. .124” Dia. +.000” - .002”.Buy Today, Only $45.00 (3PK) Made in USA.

ProDrill™ (SSSC188D/PMXSSSC188)Superior quality machine tooling made from M42 cobalt. Micro-edge for walk-free machining and quick penetration. Short length for tight areas, thin web for fast clean drilling and chip clearing. Cut through hard metals up to and including Rc55, stainless steel and titanium. Compatible with PPT188/PMXPPT188 ProTractor™. Meets and exceeds most tooling specifications including Aerospace. .185” Dia. +.000” - .002”. Buy Today, Only $45.00 (2PK) Made in USA.

ProDrill™ (SSSC270/PMXSSSC270)Superior quality machine tooling made from M42 cobalt. Micro-edge for walk-free machining and quick penetration. Short length for tight areas, double fluted 135 degree split-point and 57 degree relief. Thin web for fast clean drilling and chip clearing. Machined straight and true. Most bits stop cutting at Rc35, these will cut even harder metals up to and including Rc55, stainless steel and titanium. Meets and exceeds most tooling specifications including Aerospace. .270” Dia. +.000” - .002”.Buy Today, Only $23.00 (ea) Made in USA.

ProTap™ (Gold) (PPT008/PMXPPT008)Super-sharp precision machine tooling for harder steels and alloys. Use with CNC machine or hand applications. Coated for lubricity and long life. All taps are not the same. ProMAXX® ProTaps™ are engineered to cut cleanly and effortlessly leaving a pre-cision machine-like made threaded hole. Use to cut new, or to clean existing holes.Buy Today, Only $19.95 (ea) Made in USA.

ProTractor™(PPT125/PMXPPT125)1/8” Multispline Screw Extractor w/Hex Turnout nut. Standard in ProKits™. Does not deform stud. Use with tooling above in both clock and counter-clockwise applications.Buy Today, Only $15.00 Made in USA.

ProMAXX® Catalog

ProTractor™(PPT188/PMXPPT188)3/16” Multispline Screw Extractor w/Hex Turnout nut. Does not deform stud. Use in both clock and counter-clockwise applications. Buy Today, Only $16.00 Made in USA.

ProMAXX® Kits

Kits for Ford Engines

Ford 6.0L, 6.4L DieselLeo™ Made in USA.

Ford 6.4L DieselTurbo “Y” Pipe RepairRosina™ 200 SeriesMade in USA.

Ford Gas 4.6L ,5.4L ,6.8LRocky™ 200 Series Made in USA.

Ford Gas 4.6L, 5.4L, 6.8LRocky™ TEC KitMade in USA.

Ford 4.2L V6, 4.6L/5.4L V8, 6.8L V10 Gas and 6.0L/6.4L DieselRocky™ II 200 Series Made in USA.

Ford 6.7L Diesel EGR RepairNINO™ Made in USA.

Ford 6.7L Diesel Fuel Injector RemovalPowerPull™ ProKit™Made in USA.

Ford Gas 6 Cyl. 3.5L, 3.7L & 3.5L ECO BoostElizabeth™ 200 SeriesMade in USA.

Base Kit - $299.95

Base Kit - $399.95

(R200ABSE/PMXR102C)

(RII200ABSE/PMXRII200ABSE)

(L102CINT/PMXL102CINT)

(R200APRO/PMXR102CDLR)ProKit™ Call for Specials

(RII200APRO/PMXRI100APRO)

(R102CINT/PMXR102CINT)

(L102DPRO/PMXL102BDLR)

(N100APRO/PMXEGRR100AP)

ProKit™ - $299.95(S200APRO/PMXS100APRO)

(E200ABSE/PMXE200ABSE)

(PWP100PRO/PMXPW100APRO)ProKit™ - $249.95

TEC Kit - $199.95

(E200APRO/PMXE200APRO)

Ford 6.7L Diesel Fuel Injector RemovalPowerPull™ Lift KitMade in USA.

Ford 6.7L Diesel Fuel Injector RemovalPowerPull™ Hammer KitMade in USA.

Lift Kit - $149.95(PLF100K/PMXPLK100K)

Hammer Kit - $119.95(PLH100A/PMXPHR100K)

ProKit™ Call for Specials

TEC Kit - $199.95 ProKit™ Call for Specials

Base Kit - $299.95

ProKit™ Call for Specials

ProKit™ - $495.00

*Best Value

Buy both and save!

These accessories and more are available from your local authorized distributor, or Call: 724-941-0941 or Click online at www.promaxxtool.com.

Ford 6.7L Diesel Hold-down Bolt RepairNico™ Made in USA.

Base Kit - $299.95(A200ABSE/PMXA100A)

Kits for Chrysler/Dodge/Jeep Dodge Hemi 5.7LAlan™ 200 Series Made in USA.

Dodge/Jeep Gas 3.7L & 4.7LMyra™ 200 Series Made in USA.

ProMAXX® Kits

(O100APRO/PMXO100APRO)

(A200APRO/PMXA100ADLR)

(Y200APRO/PMXY100ADLR)

GM Gas 4 Cyl. 2.2L & 2.4LDale™ Made in USA.

(D100ABSE/PMXD100ABSE)

GM Inline 2.8L, 3.5L, 3.7L, 4.2L Mikki™ 200 SeriesMade in USA.

(I200APRO/PMXI101ADLR)(I200ABSE/PMXI101B)

GM GAS V8 4.8L,5.3L,5.7L,6.0L,6.2LMikey™ 200 SeriesMade in USA.

(M200BBSE/PMXM101B)

Kits for Isuzu EnginesIsuzu Diesel Inline 5.1LAnthony™ Made in USA.

(M200BPRO/PMXM101BDLR)

(Z100ABSE/PMXZ100ABSE)

(Y200APRO/PMXY100A)

(Z100APRO/PMXZ100APRO)

(D100APRO/PMXD100APRO)

ProKit™ - $499.95

ProKit™ Call for Specials

Base Kit - $299.95 ProKit™ Call for Specials

Kits for GM EnginesGM Gas V8 8.1LButch™ 200 SeriesMade in USA.

(B200ABSE/PMXB200ABSE)

(B200APRO/PMXB200APRO)Base Kit - $299.95ProKit™ Call for Specials

Base Kit - $299.95

Base Kit - $299.95

Base Kit - $299.95

Base Kit - $299.95

ProKit™ Call for Specials

ProKit™ Call for Specials

ProKit™ Call for Specials

ProKit™ Call for Specials

These accessories and more are available from your local authorized distributor,

or Call: 724-941-0941 or Click online at www.promaxxtool.com.

ProMAXX® Catalog

ProDrill™ Platinum (PLT125/PMXPLT125)High-Performance A-Gr-SiV submicron grain carbide precision machine tooling. Coated for lubricity and fast feed rates, even in hardened steel. Use for extremely hard materials including broken extractors or taps. Micro-edge, double fluted, 140 degree Point, 30 Degree Helix. -.0015” + .0000”.Buy Today, Only $29.95 Made in USA.

ProDrill™ Platinum (PLT188/PMXPL T188)High-Performance A-Gr-SiV submicron grain carbide precision machine tooling. Coated for lubricity and fast feed rates, even in hardened steel. Use for extremely hard materials including broken extractors or taps. Micro-edge, double fluted, 140 degree Point, 30 Degree Helix. -.0015” + .0000” .Buy Today, Only $39.95 Made in USA.

ProFlex™(PFX375/PMXPFX375)Reduce drill bit breakage. Super flexible, won’t bind. Includes swivel end. Use in conjunction with ProDial™. Buy Today, Only $29.95 Made in USA.

ProGard™(PPG5250/PMXPPG5250)ProMAXX® ProGard™, Snaps right on to your ProMAXX® PPR5250 ProRatchet® and instantly converts it to a flathead ratchet for fast and efficient power transfer. Buy Today, Only $29.95 Made in USA.

ProDial™(PPD350/PMXPPD350)Dial in the proper RPM for your ProMAXX® Tooling supplied. Make it a easier, faster repair. Highly recommended. Buy Today, Only $19.95 Made in USA.

ProCutter™ Assy.(PPC007A/PMXPPC007A)Broken studs leave behind corrosion and a burr that locks the remnant in the head leading to broken extractors. The ProCutter™ cuts the burr and removes the corrosion in just five seconds leaving the tapped hole like new. Replaceable four cutter blade. Oil-hardened steel arbor. An essential tool. Buy Today, Only $65.00 Made in USA.

ProChuck™ and ProKey™(PPC250/PMXPPC250)Converts a ¼” drive ratchet into a powerful micro-drill for limited access areas near the firewall or behind the strut/shock tower. Comes with ProKey™. Buy Today, Only $60.00 Made in USA.

ProRatchet™ Tasmanian Devil(PPR5250/PMXPPR5250) SUPER FAST - SUPER TORQUE - SUPERTOOL Turn your new ProKit™ into a PowerKit™ by adding our Tasmanian Devil™ ProMAXX® ProRatchet™. For limited access areas. Turns at optimal speed for our ProMAXX® SSSC125/PMXSSSC125 and SSSC030/PMXSSSC030 machine tooling at super-fast 500 RPM and a whopping 55 Ft-Lbs of torque. Use with all ProMAXX® machine tooling. Drill or Drive - FAST. Buy Today, Only $249.95 Made in USA.

Shown with OptionalProGardTM

ProPin - NINO™PPP2750/PMXPPP2750Nylon Precision Engine Turned Alignment Pin. Assist in aligning NINO™ with only one broken bolt. Optional use in 200 Series NINO™ ProKit™.Buy Today, Only $15.00 Made in USA.

ProBushing - NINO™PPB2125N -- OptionalPiloting hole for longer bit life. Precision Ground Hardened Steel ProBushing™. Optional: In ProMAXX® Nino™ ProKits™. Use only with SSSC125/PMXSSSC125 ProDrill™ tooling bit. Buy Today, Only $25.00 Made in USA.

ProLube™(PPL001/PMXPPL001)ProMAXX® ProLube™ is drill and tapping fluid that reacts chemically to form a complex surface-attaching film of protection. Makes drilling and tapping easy & fast. The lubrication is non-flammable and poses no threat to the environment. Buy Today, Only $5.00 Made in USA.

ProDrill™ Platinum (PLT270/PMXPL T270)High-Performance A-Gr-SiV submicron grain carbide precision machine tooling. Coated for lubricity and fast feed rates, even in hardened steel. Use for extremely hard materials including broken extractors or taps. Micro-edge, double fluted, 140 degree Point, 30 Degree Helix. -.0015” + .0000” .Buy Today, Only $49.95 Made in USA.

PowerPull™ Oil Tube Extractor (PTE100/PMXPTE100)ProMAXX® Oil Tube extractor quickly and easily removes the broken dipstick tube without the need to raise the engine or removing the oil pan. (Ford) Buy Today, Only $69.95 Made in USA.

These accessories and more are available from your local authorized distributor, or Call: 724-941-0941 or Click online at www.promaxxtool.com.