work chairs

seating price & user guide – September 23, 2019

projek overview

• Projek Chairs have been designed and tested for users weighing up to 300 lbs• Projek Task and Conference Chairs are equipped with casters intended for use on carpeted surfaces . Use of these casters on hard

surfaces could result in unexpected rolling and tipping . Casters designed for use on hard surfaces are available . If in doubt, see your dealer for appropriate selection

• Task chair has a Synchro-tilt weight-balancing mechanism with 3 .5:1 ratio• Projek Task Chair is available in three assembly styles . Fully Assembled, Not Fully Assembled and Assembly Required . Customer

is responsible for on-site assembly when Fully Assembled is not Specified• See Multi-Use Chair Section for the corresponding Projek Conference Chair (NPRC)

Projek is a chair for all people and environments. The family includes a swivel stool, task, conference and guest chair.

Optional fixed headrest

Shrinx Mesh

Lumbar Apex Adjustment of 4"

Weight Balancing Synchro-Tilt Motion

2"3/8" (60mm hard casters are standard)

Tension Control

Optional 4D Pivoting Arm Caps pivot 210˚ (with auto safety lock) and provide alternate depth with 3" of inset .

Seat Depth Adjustment of 3"

Tilt Limiter / Back Lock Optional Arm Width Adjustment (2D and 4D Arms)

Seat Height Adjustment of 4"

Optional Arm Height Adjustment or Fixed Arm

Plastic or Aluminum Five Star Base

Statement of Line

Swivel Stool – No Arms

Swivel Stool – 2D Arms

Swivel Stool – 4D Arms

Swivel Stool – With Headrest

Guest Chair –Cantilever

Conference Chair

High Back – No Arms

High Back – Fixed T-Arms

High Back – 2D Arms

High Back – 4D Arms

With Headrest

(model classified as Multi-Use Chair)

work chairs

seating price & user guide – September 23, 2019

projek finish guide

Task Chair and Stool:• The headrest’s frame and fabric finishes default to the Outer Frame Finish and Seat Fabric Finish (Assembled Task Chair and Stool

only)• 2D and 4D Arm finish defaults to the Outer Frame Finish . For Very White the arm rest will be finished same as outer frame .

Arm Rest Pad and Arm Support finished in Ebony . Fixed Arm is available in Ebony onlyGuest and Conference Chair:• Lumbar Element not included• Arm Rest in Ebony only

Plastic Outer Frame

Plastic Inner Frame

Plastic Lumbar Element

Shrinx Mesh Back

Arm Rest

Arm Rest Pad

When selecting finishes for the Inner and Outer Frame, Lumbar and Mesh of the Projek family of chairs, Task Chair and Swivel Stool, it is possible to select different finishes for the components listed below or to have the same finish specified throughout.

Arm Support

Arm Rest

work chairs

seating price & user guide – September 23, 2019

projek dimensions & material requirementsA

rm H

eigh

t fr

om S

eat

Fixe

d T

-Arm

s -

7 3-

4"2D

7 5

/8"

- 11

1/2

"4D

7 1

1/16

" -

11 3

/8"

Width Between Arms Fixed T-Arms - 19 3-4"2D 18" - 20 5/8"4D 17 3/8" - 20 1/4"

Seat

Hei

ght

from

Flo

or

Tas

k St

anda

rd 1

6" -

20"

Tas

k H

igh

16 5

/8"

- 21

1/2

"T

ask

Low

14

1/8"

- 1

7"Sw

ivel

Sto

ol 2

2 1/

2" -

30

1/2"

Bac

k H

eigh

t fr

om S

eat

22 -

5/8

"

Hea

dres

t7-

1/4"

Seat Depth 16 1/4"- 19 1/4"

Back Width 18"

Lumber Apex Height5 3/4" - 9 1/2"

Seat Width 20 1/4"

Angle between Seat and BackTask 96.3˚-116.2˚Swivel Stool 96.3˚

Dimensions

For Conversion to Metric, multiply dimension by 25 .4 .

COM/COL Material Requirement

More yardage may be required depending upon the upholstery pattern, repeat, directionality and pattern matching . Leather yield varies from 60-80% and may be affected by the quality of the COL including location and quantity of blemishes, size and shape of hide . The size of the sewing pattern and the number of units ordered may also impact yield . Always round-up to the next hide .

Ove

rall

Hei

ght

Tas

k 38

5/8

" -

42 5

/8"

Swiv

el S

tool

44

5/8"

- 5

2 5/

8"

Overall Width 29 1/4"

Overall Depth 29 1/4"

DUAL UPHOLSTERED COM COL [yards] [sq . ft]

Seat 7/8 8 3/4Headrest 1/2 4 7/8

WEIGHTGeneral Use/Executive Task 35 lbsSwivel Stool 41 .8 lbs

Task Chair

work chairs

seating price & user guide – September 23, 2019

projek dimensions & material requirements (continued)A

rm H

eigh

t fr

om S

eat

7 1/

2"

Width Between Arms 19 3/4"

Seat

Hei

ght

from

Flo

or

18"

Bac

k H

eigh

t fr

om S

eat

17 1

/2"

Seat Depth 19"

Back Width 18 3/4"

Seat Width 19 1/4"

Angle between Seat and Back108˚

Dimensions

For Conversion to Metric, multiply dimension by 25 .4 .

COM/COL Material Requirement

More yardage may be required depending upon the upholstery pattern, repeat, directionality and pattern matching . Leather yield varies from 60-80% and may be affected by the quality of the COL including location and quantity of blemishes, size and shape of hide . The size of the sewing pattern and the number of units ordered may also impact yield . Always round-up to the next hide .

Ove

rall

Hei

ght

35 1

/2"

Overall Width 23 3/4"

Overall Depth 22 1/2"

DUAL UPHOLSTERED COM COL [yards] [sq . ft]

Guest Seat 7/8 8 3/4

WEIGHTCantilever Guest 18 .4 lbs

Guest Chair

work chairs

seating price & user guide – September 23, 2019

projek adjustment features & instruction

SEAT HEIGHT ADJUSTMENT SEAT DEPTH ADJUSTMENT

4D ARM PIVOT ADJUSTMENT ARM HEIGHT ADJUSTMENT

BACK TILT ADJUSTMENT TILT TENSION ADJUSTMENT

Seat height can be adjusted by pulling outward on the button below the seat on the right hand side . When this button pulled, the weight of the body will cause the seat to lower, and releasing it stops the seat at the desired height . Pulling outward on the button with no weight on the seat allows it to rise .

To adjust the seat depth, pull outward on the button below the seat on the left-hand side and simultaneously lift your weight from the seat while sliding the seat forward or backward . Release button to lock the seat in place .

To pivot the arm cap, depress the auto safety lock button on the outside of the armrest and pivot 210˚ degrees to desired position . Release the button to lock in place . 180˚ arm rotation adjusts the arm depth .

To adjust the arm height, press the button below either arm rest to raise or lower it to the desired position . Release the button to lock in place .

Turning the grip found under the left side of the seat limits the back tilt travel and locks the back . Travel is limited on 3 positions with back lock in the upright position .

Fine tune the weight balanced tension by rotating the dial located below the seat center to suit personal preference .

work chairs

seating price & user guide – September 23, 2019

projek adjustment features & instruction (continued)

LUMBAR HEIGHT-ADJUSTMENT ARM WIDTH ADJUSTMENT

STOOL FOOT RING HEIGHT

The lumbar height-adjustment knobs can be found on the back where the Inner Frame connects to the Lumbar Element .The height of the lumbar support can be adjusted by sliding them up and down .

To adjust the width of each arm, turn the dial clockwise to release the arm lock . Slide the arm inward or outward to the desired position . Tighten the knob to lock the arm in place .

To raise or lower the stool’s foot ring, turn the foot ring’s knob counter clockwise to release the foot ring and adjust the ring until you reach the desired level . Turn the knob clockwise to lock in place .

work chairs

seating price & user guide – September 23, 2019

N P R T Projek – Synchro-Tilt Task Chair

FEATURES• Standard pneumatic cylinder provides height adjustment of 4"• Seat depth adjustment of 3" and Lumbar height adjustment of 4"• Back tilt can be locked in the upright position or left to free flow to 3 defined angle ranges• Weight-balancing with a travel limiter synchro-tilt mechanism (3 .5:1 tilt ratio) with unique

preference control to tilt tension . Back recline angle range is 0° - 20° and seat adjustment range angle is 0°- 6 .5°

• Ebony base is available in plastic only• Hard casters are standard and are well suited for soft flooring such as carpeting• Soft casters are available for use on hard flooring, such as wood, concrete or tile• Headrest option is only available on Fully Assembled styleNOTESHeadrest’s frame and fabric finishes default to Outer Frame Finish and Seat fabric finish .2D and 4D Arm finish defaults to the Outer Frame Finish . For Very White the arm rest will be finished same as outer frame . Arm Rest Pad and Arm Support finished in Ebony . Fixed Arm is available in Ebony only

Projek Chair is Dual Upholstery with Shrinx Mesh available on the back only and Teknion’s Standard and Graded-In-Fabrics on seat . See Projek Finish Guide to define Plastic Outer Frame, Plastic Inner Frame and Lumbar Element finish details . Not all configurations are available in the Xpress program .Assembly Required (K) is further knocked-down and customer is responsible for assembly .

2D Arm

4D Arm

Fixed T-Arm

DESCRIPTION PRICE COM/ COL/NO HEADREST (N) Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10

No Arms 785 806 826 847 868 888 910 931 950 1022Fixed Arms 871 893 913 934 955 975 997 1017 1036 11092D Width, Height-Adjustable T-Arms 899 919 940 961 981 1002 1024 1043 1063 11354D Width, Height-Adjustable T-Arms with Pivot Arm Cap 954 974 995 1016 1036 1057 1079 1098 1118 1190

Leather Leather Leather Leather LA LB LC LD

No Arms 963 991 1072 1099Fixed Arms 1050 1077 1158 11862D Width, Height-Adjustable T-Arms 1077 1104 1186 12134D Width, Height-Adjustable T-Arms with Pivot Arm Cap 1131 1158 1241 1268

If Headrest (Y) is specified add 130 If Polished Aluminum (C9) Base is specified add 60 If Soft Casters (A) are specified add 21 If Hard Glides (B) are specified add 21 If Soft Glides (C) are specified add 33 If Fully Assembled (F) are specified add 0

Headrest

N No Headrest

Y With Headrest

Arm Style

N No Arms

F Fixed T-Arms

W 2D Width and Height-Adjustable T-Arms

P 4D Width and Height-Adjustable T-Arms with Pivot Arm Cap

Shrinx Mesh Back

S2 Ebony Original

S4 Veil Noir

S5 Veil Blanc

S6 Veil Grau

F1 Fleck Charcoal

F2 Fleck Smoke

F3 Fleck Dune

F4 Fleck Peat

Seat Upholstery

Finish

Fabric

Leather

Cylinder Style

1 Standard

2 High

3 Low

Plastic Outer Frame Finish

8B Ebony

8C Very White

Plastic Inner Frame

Finish

8B Ebony

8C Very White

Plastic Lumbar Element Finish

8B Ebony

8C Very White

Base Finish

52 Ebony

C9 Polished Aluminum

Casters/ Glides

(Optional)

~ Casters, Hard

A Casters, Soft

B Glides, Hard

C Glides, Soft

Assembly Style

F Fully Assembled

N Not Fully Assembled

K Assembly Required

PRODUCT OPTIONS

SAMPLE ORDER CODE

NPRT N N S2 L207 1 8C 8B 8B 52 A F

Xpress

work chairs

seating price & user guide – September 23, 2019

N P R DProjek – Swivel Stool

FEATURES• Standard pneumatic cylinder provides height adjustment of 8"• Swivels 360˚• Includes Chrome footring• Seat depth adjustment of 3"• Lumbar height adjustment of 4"• Ebony base is available in plastic only• Hard casters are standard and are well suited for soft flooring such as carpeting• Soft casters are available for use on hard flooring, such as wood, concrete or tile

NOTESHeadrest’s frame and fabric finishes default to Outer Frame Finish and Seat fabric finish .2D and 4D Arm finish defaults to the Outer Frame Finish . For Very White the arm rest will be finished same as outer frame . Arm Rest Pad and Arm Support finished in Ebony . Fixed Arm is available in Ebony only

Projek Chair is Dual Upholstery with Shrinx Mesh available on the back only and Teknion’s Standard and Graded-In-Fabrics on seat .See Projek Finish Guide to define Plastic Outer Frame, Plastic Inner Frame and Lumbar Element finish details .When Headrest + accessory is specified, Stool ships Not Fully Assembled and must be assembled by customer on-site .

DESCRIPTION PRICE COM/ COL/NO HEADREST (N) Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10

No Arms 840 861 881 902 923 943 965 985 1004 10772D Width, Height-Adjustable T-Arms 954 974 995 1016 1036 1057 1079 1098 1118 11904D Width, Height-Adjustable T-Arms with Pivot Arm Cap 1008 1029 1050 1070 1091 1112 1133 1153 1173 1245

Leather Leather Leather Leather LA LB LC LD

No Arms 1077 1098 1127 11542D Width, Height-Adjustable T-Arms 1190 1212 1241 12684D Width, Height-Adjustable T-Arms with Pivot Arm Cap 1245 1267 1296 1322 If Headrest (Y) is specified add 130 If Polished Aluminum (C9) Base is specified add 60 If Soft Casters (A) are specified add 21

Arm Style

N No Arms

W 2D Width and Height-Adjustable T-Arms

P 4D Width and Height-Adjustable T-Arms with Pivot Arm Cap

Headrest

N No Headrest

Y With Headrest

Shrinx Mesh Back

S2 Ebony Original

S4 Veil Noir

S5 Veil Blanc

S6 Veil Grau

F1 Fleck Charcoal

F2 Fleck Smoke

F3 Fleck Dune

F4 Fleck Peat

Seat Upholstery Finish

Fabric

Leather

Plastic Outer Frame Finish

8B Ebony

8C Very White

Plastic Inner Frame Finish

8B Ebony

8C Very White

Plastic Lumbar Element Finish

8B Ebony

8C Very White

Base Finish

52 Ebony

C9 Polished Aluminum

Casters/Glides (Optional)

~ Casters, Hard

A Casters, Soft

NPRD N N S2 L207 8B 52 A

PRODUCT OPTIONS

SAMPLE ORDER CODE

work chairs

seating price & user guide – September 23, 2019

N P R GProjek – Guest Chair

FEATURES• Stacks 4 chairs• Arms are finished in EbonyNOTESBack Inner Frame Finish is available in Ebony and Very White .Armrest is available in Ebony plastic only .Projek Chair is dual upholstery with Shrinx Mesh available on the back only and Teknion Standard and Graded-in Fabrics on seat . See Projek Finish Guide to define Plastic Outer Frame and Plastic Inner Frame finish details .

DESCRIPTION PRICE COM/ COL/ Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10

Cantilever 654 676 697 720 742 763 785 807 829 895

Leather Leather Leather Leather LA LB LC LD

Cantilever 835 862 943 971If Chrome (C6) is specified add 84

PRODUCT OPTIONS

SAMPLE ORDER CODE

Base Style

C Cantilever

Shrinx Mesh Back

S2 Ebony Original

S4 Veil Noir

S5 Veil Blanc

S6 Veil Grau

F1 Fleck Charcoal

F2 Fleck Smoke

F3 Fleck Dune

F4 Fleck Peat

Seat Upholstery Finish

Fabric

Leather

Plastic Outer Frame Finish

8B Ebony

8C Very White

Plastic Inner Frame Finish

8B Ebony

8C Very White

Frame Finish

52 Ebony

C6 Chrome

NPRG C S1 M502 8C 8B C6