programming your new remote 1 2 - dakota central
TRANSCRIPT
21Programming Your New Remote
Program the Remote to Your TV
1. Make sure the TV is on.
2. Press TV, it will blink once.
3. Press and hold SETUP, the TV key will blink twice.
4. Press 9-9-1, the TV key will blink once.
5. Press POWER.
6. Press and release the CH+ key continuously, then stop when the TV turns off.
7. Press SETUP to save code.
Program the Master Power Control
1. Make sure the TV is on.
2. Press STB.
3. Press and hold SETUP, the STB key will blink twice.
4. Press 9-9-5, the STB key will blink twice.
5. Press POWER.
6. Press TV.
7. Press STB.
8. Press and hold SETUP, until the STB key blinks twice.
This elimates the need to press the “STB” and “TV” buttons when turning on the TV.
www.dakotacentral.com | 652.3184 | 952.1000
2www.dakotacentral.com | 652.3184 | 952.1000
NUMBER TV BRAND
1 Insignia
2 LG
3 Panasonic
4 Philips/ Magnavox
5 Samsung
6 Sanyo
7 Sharp
8 Sony
9 Vizio
0 Westinghouse
1Program the Remote to Your TV
Alternative Instructions
1. Press TV
2. Press and hold SETUP, the TV key will blink twice.
3. Press TV, the TV key will be solid.
4. Press and hold [Brand number] until TV shuts off
Follow step 2 on reverse to program Master Power Control
Identify TV Brand Number