FEE SUBSIDY DECLARATION UEENEEI150A AND UEENEEI151A (PROGRAMMABLE LOGIC CONTROLLERS)

I (full name)

Am currently working in the building & construction industry Am currently unemployed and have worked in the building & construction industry in the past 6 months

Please note: If the CTF denies this subsidy application you will be required to pay the full (non-subsidised) fee immediately – persons working in the mining industry, for the government or the armed service are not eligible for the subsidy.

Name of Employer(required to claim the fee subsidy)

SignatureDate

The CTF subsidy reduces the student fee by up to 80%

UEENEEI150A DEVELOP, ENTER AND VERIFY DISCRETE CONTROL PROGRAMS FOR PROGRAMMABLE CONTROLLERS

UEENEEI151A DEVELOP, ENTER AND VERIFY WORD AND ANALOGUE CONTROL PROGRAMS FOR PROGRAMMABLE

LOGIC CONTROLLERS18/01/18 | RTO code 2394

REGISTRATION FORM

UEENEEI150A Develop, enter and verify discrete control programs for

programmable controllers UEENEEI151A Develop, enter and verify word and analogue control

programs for programmable logic controllers

Surname

First Name

Unique Student Identifier (USI) refer www.usi.gov.au

Date of Birth

Address

Suburb Postcode

Telephone Facsimile

Mobile

Email

Company Name

Company Address

Suburb Postcode

Company Telephone Company Email

How did you find out about CET?

Would you like to receive special offers and newsletters from CET? Yes NoI wish to complete the course at:

Joondalup campus Jandakot campus

Course Date

Do you have any of the following? Certificate III in Electrotechnology or equivalent EW Licence Number Other (please specify)

Course Fees Please find enclosed: Cheque Company Purchase Order Credit Card Money Order

Other (please specify)

Credit Card details VISA Mastercard

Card number

Card expiry date

Security code (3 digits on back of card)

Name on card Order payable to CET for:UEENEEI150A Course Fee $599.00 NECA Member Fee $560.00 Subsidised Fee $180.00

(Fees are subject to change) Paid by (if other than student, please provide name and address)

UEENEEI151A Course Fee $740.00 NECA Member Fee $700.00 Subsidised Fee $222.00

PROGRAMMABLE LOGIC CONTROLLERS

This course contains two units of competency. Candidates can opt to complete both units or they can be completed individually. Applicants must have basic computing skills, an understanding of control circuitry and a working knowledge of both written and spoken English.

UEENEEI150A: This course provides training in development, installation and testing of programs for programmable logic controllers (PLC) using discrete control functions.

On completion of this course learners will be able to apply knowledge of control systems and development of programming methods, use ladder and function block diagrams, statement lists, and instruction sets, follow written programming instructions, and document program development and testing activities.

UEENEEI151A: This course provides training in development, installation and testing of programs for an industrial system requiring advanced control functions.

On completion of this course learners will be able to use structured logic and acceptable design techniques, apply knowledge of high level instructions, and document development and programming activities.

COURSE CONTENT

CORE UNIT(S) OF COMPETENCYUEENEEI150A Develop, enter and verify discrete control programs for

programmable controllers

UEENEEI151A Develop, enter and verify word and analogue control programs for programmable logic controllers

COURSE DURATIONUEENEEI150A - part time, 2 evenings per week for 5 weeks for a total of 40 hours

UEENEEI151A - part time, 2 evenings per week for 5 weeks for a total of 40 hours

COURSE REQUIREMENTSApplicants must hold a current WA Unrestricted Electrician’s Licence or equivalent issued in an Australian State or Territory.

To gain entry into this course, applicants must have attained the pre-requisite units of competency, which can be delivered and assessed at the College requiring additional attendance and fees.

PRE-REQUISITE UNIT(S) OF COMPETENCYFor UEENEEI150A:

UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace

For UEENEEI151A:

UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace

UEENEEI150A Develop, enter and verify discrete control programs for programmable controllers

Fully enclosed shoes must be worn at all times in CET buildings. Safety boots/shoes must be worn when working in the workshop. Refer to the Code of Conduct on the College website www.cet.asn.au for details on dress code.

COURSE MATERIALSApplicants are required to obtain the following resource prior to course commencement which are available from the CET:

• ‘Programmable Logic Controllers latest edition by Frank D. Petruzella

It is recommended that participants have a current edition of AS/NZS 3000.

CERTIFICATIONA Statement of Attainment will be issued for each Unit of Competency completed.

HOW TO ENROLTo enrol, complete and return the form over the page with full payment to the relevant campus. Your booking is not guaranteed until payment and registration has been received. Under no circumstances will registration without payment entitle you to a place on the course.

SKILLS AND NATIONAL RECOGNITION The CET Skills Recognition process benefits applicants who have undergone prior learning and recognises competencies obtained outside a formal educational or training environment, gained through life or work experience. Competencies currently held by applicants will be formally assessed against each applicable Unit of Competency and maybe recognised regardless of how, when and where they were achieved. Skills Recognition is an assessment process and a cost recovery charge will apply.

CET accepts and provides credit to learners for units of competency and/or modules (unless licensing or regulatory requirements prevent this) where these are evidenced by:

• AQF certification documentation issued by any other RTO or AQF authorised issuing organisation; or

• Authenticated VET transcript issued by the Registrar

If you believe you are entitled to Skills and/or National Recognition, we encourage you to complete an Application Form available from our administration team.

COURSE OVERVIEW

WWW.CET.ASN.AU

CET CANCELLATION POLICY All cancellations must be received in writing via mail or email

8 days+ prior to course commencement

100% fee refund

2-7 days prior to course commencement

90% fee refund

1 day or less prior to course commencement

No refund

CET TRANSFER POLICY Should a candidate wish to transfer their scheduled course date

Initial transfer request made 8 days or more prior to course commencement

No fee applies

1 to 7 days prior to course commencement

10% of full fee charge

Any subsequent requests for course transfers

10% of full fee charge

CONTACT DETAILS

JOONDALUP CAMPUS Phone (08) 9233 5000 Email joondalup@cet.asn.auAddress 20 Injune Way, Joondalup WA 6027Post PO Box 4, Joondalup DC WA 6919

JANDAKOT CAMPUS Phone (08) 6595 6600 Email jandakot@cet.asn.auAddress 5 Avior Avenue, Jandakot WA 6164 Post PO Box 3857, Success WA 6964

WWW.CET.ASN.AU

The College of Electrical Training (CET) is the major private training provider for the Western Australian electrical and telecommunications industries.

Excellence in customer service is our priority; we offer modern ‘state of the art’ facilities and quality training by industry for industry.