Changes are made to the engines’ fuel curve via the CMD Marine’s onboard microprocessor. Using this technology, we are able to offer a large area of adjustment without making any permanent changes to the ECU. Removing the CMD Marine modules returns the engine to its previous stock condition.

The unit comes complete with software and USB cable link that allows you to change between different maps or make adjustments to a map file. The USB port provides an instant, no-hassle way to connect the CMD Marine unit to today’s’ computers.

FEATURES• SMALL FOOTPRINT FOR EASY MOUNTING (for V-8 applications, 2 modules at 5/8” x 3-3/8” x 2-5/16”)• USB POWERED FROM COMPUTER (can be programmed off-vehicle)• 2 POSITION MAP SWITCHING FUNCTION BUILT IN (map switch not included)• 3 OPTIONAL ANALOG INPUTS (allows user to tap or add any 0-5v sensor and build an adjustment table based on its input

such as temperature, throttle position, etc)• INDIVIDUAL CONTROL PER ENGINE BANK (left and right)• UNIT HAS A -100%/+250% FUEL CHANGE RANGE.

• HIGH RESOLUTION MAP SENSOR BASED FUEL TABLE FOR PRECISE FUEL CHANGES

• AUTOMATIC MAP RETRIEVAL UPON CONNECTION

• ONBOARD NOTES STORAGE

• QUICK CONNECT CAN ACCESSORY COMMUNICATION PORTS FOR LCD AND AUTOTUNE ACCESSORIES

AUTO TUNE• AUTOTUNE KIT IS AVAILABLE AS A SINGLE CHANNEL WIDEBAND O2 SENSOR OR DUAL

CHANNEL WIDEBAND O2 SENSORS

• PLUGS DIRECTLY INTO THE CMD MARINE USING THE CAN ACCESSORY PORTS

• EACH MAP CELL IS INDIVIDUALLY ADJUSTABLE SO YOU CAN SPECIFY AN EXACT AIR/FUEL RATIO VALUE DESIRED FOR EACH AREA IF NEEDED.

The Autotune kit enables the CMD Marine to automatically adjust the fuel table while in operation. 2 models of the Auto Tune kit are available.

COLOR LCD UNIT If you would like to be able to monitor air/fuel readings, as well as other information from the CMD Marine units, our LCD-200 display gives that to you in the palm of your hand. This touch screen display device also gives you the ability to log all channels to an internal, user supplied SD card. With the maximum 1gb SD card installed, the LCD-200 can log up to 186 hours of data!

CMD MARINE ACCESSORIESFor the ultimate in fuel tuning, you can combine the CMD Marine unit with one of our wideband oxygen sensor monitor devices for real-time air/fuel ratio display. This will show you precisely what air/fuel ratio your engine is running at, giving you the vital information as to what changes are necessary. The CMD Marine also has a feature called AutoTune, which gives you the ability to set a target air/fuel table within the software, and have the CMD Marine automatically tune while you drive. You simply set the software to the air/fuel ratio you desire, and it will create fuel trims on the fly! You will then have the ability to implement these fuel trims to the base fuel table.

WIDE BAND 2 “Dynojets’ WideBand 2 is a standalone wideband air/fuel monitor device that will perform the same functionality as the AT-200 when connected to the CMD Marine unit. Additional features available with the WideBand 2 unit are a gauge output to drive the digital or analog gauges (available separately), as well as an additional analog input that can be used to monitor a 0-5v signal, if desired.

PRODUCT DESCRIPTION PART #

CMD MARINE MODELS AND ACCESSORIES

CMD MARINE MODELSMercury Marine 496Mag / 496HO engines CMDM-5010

Mercury Marine GM based spread port big block with EV1 injectors CMDM-5011

AUTO TUNE KITSAutotune Kit single sensor AT-200

Autotune Kit dual sensor AT-300

Weld Bung for O2 sensor M18-1.5 37218120

Plug for O2 sensor bung M18-1.5 37318133

Washer, copper O2 sensor 36973000

COLOR LCD UNITColor LCD Unit for use with CMD Mrine LCD-200

Extra Harness for LCD-200 (included in kit) 76950066

PRODUCT DESCRIPTION PART #

WIDE BAND 2Wide Band 2 Base Kit 15-7003

Wide Band 2 Kit - with Color LCD Unit 15-7008

Wide Band 2 Kit - with White Digital Gauge 15-7007

Wide Band 2 Kit - with Black Digital Gauge 15-7006

Wide Band 2 Kit - with White Analog Gauge 15-7005

Wide Band 2 Kit - with Black Analog Gauge 15-7004

ACCESSORY CABELS36” CAN to CAN cable 76950117

18” CAN to CAN cable 76950143

6” CAN to CAN cable 76950145

6’ CAN extension cable 76950285

2191 Mendenhall Drive North Las Vegas, NV 89081

1-800-992-4993 www.dynojetcmd.com

PROGRAMMABLE FUEL MANAGEMENT CONTROLLER

Pop the hatch to install the CMD Marine units, and within a few minutes you’ll have the power to control your engines fuel curve at the tips of your fingers. Our testing has shown impressive gains in fuel economy on all stock engines, while being flexible to support future modifications. Want to install those new headers or camshaft, the CMD Marine gives you the ability to tune the engine for a proper fuel delivery curve without the downtime of shipping your ECU (electronic control unit) off for recalibration. On a stock 502/500HP, we achieved a 28% increase in fuel economy in the midrange RPM’s with no other changes!

The AT-300 kit includes two sensors and control box. This allows dual channel wideband feedback, and will adjust the fuel curve for each bank of cylinder independently.

The AT-200 single channel kit includes a single sensor and control box. This allows adjustment of the entire fuel curve for both banks.

CMDM-5010Mercury Marine 496Mag / 496HO engines

CMDM-5011Mercury Marine GM based spread port

big block with EV1 injectors