1st Process Systems Engineering and Safety Symposium 2019

‘The Role of Modelling and Simulation Towards IR 4.0’

PROGRAM BOOKLET

4th September 2019 | Vistana Hotel, Kuantan

Organized by:

in Collaboration With:

http://www.google.com/url?q=http://prospect.utm.my/&sa=D&sntz=1&usg=AFQjCNFyhwCVrxX2R-0x5gE0fyBGW3Imbw

1

Forewords

On behalf of Faculty of Chemical and Process Engineering Technology and the organizing committee, it is an honour and pleasure, to welcome all participants to the 1st Process System Engineering and Safety (ProSES) Symposium 2019, held at the Vistana Hotel, Kuantan.

In this symposium, the theme “The Role of Modelling and Simulation Towards Industrial Revolution 4.0 (IR 4.0)” was chosen which is aligned with the current Malaysia’s vision to become a developed nation which is equitable, sustainable and inclusive by 2025 or even earlier. The emergence of IR 4.0 technology provides the opportunity for dramatically increasing the reliability and efficiency in production operations of many industrial sectors including chemical-based processing.

This one-day symposium is aimed to gather intellectuals from various fields to share the knowledge and discuss the recent trends and current issues in the fields of mod-elling and simulation, process control and optimization related to chemical engineer-ing. It is also served as a platform to initiate research collaboration network among participants with similar research interests from around the world.

In ProSES Symposium 2019, the technical committee has successfully obtained the privilege to publish the conference papers in IOP Conference Series: Materials Sci-ence and Engineering (Scopus indexed) and JCEIB (indexed journal).

Our wish is that you will enjoy this conference and take back with you knowledge,

experiences, contacts and happy memories of this 1st ProSES Symposium 2019. Last

but not least, we are most grateful for your participation and support.

Ir. Dr. Mohd Bijarimi bin Mat Piah Dean Faculty of Chemical and Process Engineering Technology, Universiti Malaysia Pahang

http://www.google.com.my/url?sa=i&rct=j&q=&esrc=s&source=images&cd=&ved=2ahUKEwjY9vOawuPjAhWGPI8KHbooCJ0QjRx6BAgBEAU&url=http://academic.ump.edu.my/academic/cvacademic/index.cfm?fac_code%3DFTA1000%26idstaff%3D01157%26type%3DB&psig=AOvVaw0llpZn3qVu5Iuv72tab7YVhttp://academic.ump.edu.my/academic/cvacademic/index.cfm?fac_code=FTA1000&idstaff=01157&type=B

2

Faculty of Chemical and Process Engineering Technology, Universiti Malaysia Pahang is honoured to host this inaugural symposium and to receive speakers, delegates and participants who come from all over the world, especially from dif-ferent university in Malaysia to share their thoughts and findings on the future prospects of Process Systems Engineering and Safety (ProSES).

It is my firm belief that because Malaysia is among the countries forging ahead with the IR 4.0, this is the key motivating factor to the organizing committee to endeavour this first edition and Insha-Allah, future editions of the symposium.

I am also glad that a total of more than 60 papers were submitted for this 1st ProS-ES Symposium 2019. Along with the positive responses, we look forward for more current research outputs to be published in the IOP Materials Science and Engi-neering (Scopus) Journal and Journal on Chemical Engineering and Industrial Bio-technology (JCEIB-indexed journal).

Honouring the efforts made to organize this symposium, I would like to extend my heartiest appreciation and congratulations to the members of the organizing com-mittee for their unwavering endeavour, commitment and dedication.

To all conference speakers, delegates and participants, I wish you all a fruitful dis-course and deliberations and it is my earnest hope that you enjoy the warmth of our hospitality and a pleasant stay in Kuantan throughout the symposium.

Dr.-Ing. Mohamad Rizza Othman, CEng MIChemE Chairman 1st ProSES Symposium 2019

Forewords

3

Conference Program

Wednesday 4th September 2019 Vistana Hotel, Kuantan

Time Program Venue

7:30-8:30 Registration Foyer Meeting Room 5 (1st floor)

Official Opening Ceremony

8:30-8:45

Doa Recital Welcoming Remarks: Dr Mohamad Rizza bin Othman Chairman of ProSES Symposium 2019, Universiti Malaysia Pahang

Meeting Room 5 8:45-9:00

Officiating Remarks: Deputy Vice-Chansellor (Research & Innovation) UMP Professor Dr. Kamal Zuhairi bin Zamli

9:00-9:10 Officiating Ceremony Montage

9:10-9:20 Photography Session

9:20-9:30 Exhibition Visit

9:30-9:45 Refreshment Foyer Meeting Room 5 (1st floor)

9:45-10:15 Keynote session 1: Prof Ir Dr Haslenda Hashim, Universiti Teknologi Malaysia “Process Modelling and Simulation Toward Industrial Revolution 4.0”. Chairman: Dr Hanida Abdul Aziz

Meeting Room 5

10:15-12:30 Parallel Session 1

12:30-14:00 Lunch break Cafe

14:00-14:30 Keynote session 2: Prof. Dr Azmi Mohd Shariff, Universiti Teknologi Petronas “Process Safety in Industrial Revolution 4.0”. Chairman: Dr Abdul Halim Abdul Razik

Meeting Room 5

14:30-15:45 Parallel Session 2

15:45-16:00 Refreshment Foyer Meeting room 5 (1st floor)

16:00-17:30 Parallel Session 3

Conference Dinner

19:30-19:45 Dinner Registration Foyer Meeting Room 1

19:45-20:00 Arrival of honourable guests and VIP

Meeting Room 1

20:00-20:05 Doa recital

20:05-20:15 Speech by Deputy Dean

20:15-20:35 Speech by Chairman

20.35-20.40 Doa recital and dinner

20.40-21.00 Cultural show

21.00-21.15 Symposium video show

21.15-21.30 Presentation souvenir to sponsorship 1st ProSES Symposium 2019 Award

22:00 Adjourn

4

Time Parallel Session 1

Track A: Renewable Energy Venue: Meeting Room 3 Chairperson: Dr. Noorli-sa Harun

Track B: Integration & Optimisation Control & Monitoring Venue: Meeting Room 4 Chairperson: Dr. –Ing. Aainaa Izyan Nafsun

Track C: Material Science & Engineering Venue: Meeting Room 5 Chairperson: Dr Ezrin Hani Sukadarin,

10:15-10:30 A10 Direct Production of Levulinic Acid from Old Coconut Water Fadil bin Ismail, Norl-iza binti Abd Rahman

B1 Aspen Plus Simulation and Optimization of Industrial Spent Caustic Wastewater Treatment by Wet Oxidation Meth-od Shivanandaa Chan-draseagar, Abdulhalim Abdulrazik, Siti Noredyani Abdul Rahman and Mohd Ai-zudin Abd Aziz

D15 Three different types of tea as surfactant in liquid exfoliation of graphite: green tea, black tea and oolong tea F S Ismail, K Yusoh, A S Zainal Abidin, A H Abdullah and Z Ismail2

10:30-10:45 A3 Evaluation of factors affecting bioethanol production from oil palm frond juice by Saccharo-myces cerevisiae using central composite design Zani S H M, Asri F M, Azmi N S, Yussof H W and Zahari M A K M

B6 Integrating ils in improv-ing palm oil production K N Mansor , M Ashraff M Halim, Syamsul B Abdullah

D6 Interaction Study be-tween M-Phenylenediamine, Trimesoyl Chloride and Nylon 66 using Molecu-lar Dynamic Simulation W Z A W Jusoh, S A Rahman, A L Ahmad and N M Mokhtar

10:45-11:00 A6 Optimization of empty fruit bunch gasification process parameters using response surface methodology N H A Halim, S Saleh and N A F A Samad

B9 Towards water integra-tion in Eco-Industrial Park: An overview of water recovery from industries S F Sa’ad, R Zailan, S R Wan Alwi, J S Lim and Z A Manan

D4 The Use Of Ladle Fur-nace Slag In The Treat-ment Of Contaminants Water In Acid Mine Drainage Nur Athirah Moham-ad Basir, Abd Aziz Mohd Azoddein, Abdul-halim Abdulrazik and Nur Asmaa’ Asilah bt Az-man

Parallel Session

5

Time Parallel Session 1

11:00-11:15 A8 Kinetic Model Develop-ment for Torrefied Green Waste N A Jamin, N A F A Sa-mad and S Saleh

B8 Optimal Production of Biogas from Multiple Sources of Wastewater and Organic Waste in an Eco-Industrial Park Con-text M Arif, S R Wan Alwi, J S Lim, Z A Manan

D10 Characterization of dehydrated keratin protein extracted from chicken feather using naoh Basma Y. Alashwal, Arun Gupta, Mohamed Saad Bala Husain

11:15-11:30 A1 Aspen plus simulation and optimization of bio-gas production in anaer-obic digestion process Ravendran, R. R., Ab-dulrazik, A., Zailan, R.

B2 Assessment of heat pumping technology in oleochemical fatty acid fractionation N M Sidek and M R Othman

D8 Properties of Keratin Hydrogels from Chick-en Feather for Biomed-ical Applications Basma Y. Alashwal, Arun Gupta, Mohamed Saad Bala Husain

11:30-11:45 A2 Investigation on the effect of residence time towards the characteris-tics of torrefied food waste Abdul Rahman, R. N. U., Abdul Rasid, R. , Ismail, M.,

B5 Maximising heat recov-ery with heat loses and gains for total sites Lawal, M., Wan Alwi, S. R., Manan, Z. A., Ho, W. S.

D3 Screening of the factors for novel pour point depressant copolymer synthesis to improve the copolymer yield Elarbe, B., El Ganidi, I., Ridzuan, N., Abdullah, N.

11:45-12:00 A5 Co-gasification of coal and empty fruit bunch in an entrained flow gasifi-er: a process simulation study Deraman, M. R., Rasid, R. A., Othman, M. R., Suli, L. N. M.1

B3 Minimizing loop interac-tion in multi input multi output (mimo) system using partial decoupler approach Sulaiman, M.S and Ah-mad, Z

D2 Synthesis and charac-terization of a terpoly-mer as a wax deposi-tion inhibitor in the crude oil pipeline El Ganidi Ibrahim, Elarbe Basem, Abdul-lah Norhayati, Ridzuan Norida

12:00-12:15 A7 Syngas software for biomass gasification process Samad, N.A.F.A., Saleh, S.

B13 Fractionating Oleochem-ical Fatty Acid by Vacu-um Dividing Wall Col-umn: Controllability Analysis M R Othman

D9 The efficiency of mem-brane anaerobic sys-tem (MAS) in treating Sugarcane mill effluent (SCME) Z.H.Yasmeen; N.H. Abdurahman; M.S. Hybat; Y.M. Rosli

6

Time Parallel Session 1

12:15-12:30 A9 Integrating microwave heating pre-treatment to improve torrefaction of food waste Ismail, M., Abdul Rasid, R., Ahmad, N. S., Abdul Rahman, R. N. U.

B4 Adaptive pls inferential soft sensor for continu-ous online estimation of nitric oxides emission in industrial boiler S H Hasnen , H Zabiri, Prakash K.K, Tg Aman-syah Tuan Mat

D5 Economically Advance-ment of Membrane Anaerobic System (MAS) for Palm Oil Mill Effluent M.S. Hybat; N.H. Ab-durahm ;Z.H Yasmeen , J. Jemaa; N.H.Azhary

Parallel session 2

Track A: Separation & Purification Technology Venue: Meeting Room 3 Chairperson: Dr Mirta Widia

Track B: Safety & Loss Prevention Venue: Meeting Room 4 Chairperson: Dr. Nurud Suria Suhaimi

Track C: Material science and engineer-ing Catalyst & Reaction Engineering Resource Conservation & Sustainability Venue: Meeting Room 5 Chairperson: Dr Wan Norlinda Roshana

14:30-14:45 E9 Diffusion Coefficients of Trivalent Rare Earth/Actinide Ions in Acid and Alkaline Aque-ous Solutions M. S. Liyananadirah, M. R. Deraman, W. H. Ibra-him, N. Harun

F3 A Road Map to Genera-tive Safety Culture: An Integrated Conceptual Mode A Shahid, M S Zaidi, Azizan

D13 Properties of Micro-crystalline Cellulose Prepared From Oil Palm Empty Fruit Bunch at Different Sulfuric Acid Concen-tration and Hydrolysis Temperature Sukaimi, J., Wan Ab-dullah, W.N.H., Supian, M.A.F., Jamari, S.S., Mohd Azman, N.A., Mohamad, S., Ali, M.F.

14:45-15:00 E11 24 fractional factorial design for pvdf/pebax film composite synthesis on gas selectivity study Mohd Syafiq Abdul Waha, Sunarti Abd Rahman, Nur Hanuni Ramli, and Abdul Latif Ahmad

F1 Assessment of the sever-ity of low density poly-ethylene (LDPE)/Ethylene hybrid explosion Badli, H., Arifin, M. N., S Z Sulaiman * , lyas Su-saidevas, J., Mahamad Khariol Nizar, N. A

D14 Optimization of the Experimental Variables Influencing the Sulfate Reducing Bacteria (SRB) Corrosion of AI 5L X-70 Carbon Steel Using Response Sur-face Methodology Abdullah, A., 1 Mo-hamad S., 1 Yahaya, N., 2 Nor M. N., 2 ,Lum W. B., 1 Salleh I. H., 1

7

Time Parallel Session 2

15:00-15:15 E2 CO2 removal via promot-ed potassium carbonate with glycine: solubility measurement at elevated pressure Isa, F., Zabiri, H., Shaarif, M.A.

F6 Risk analysis of offshore pipeline due to third party damages Ermawati Amri, Nurul Sa’aadah Sulaiman and Fares Ahmed Alaw

D1 Influence of ni loading on sba-15 extracted from oil palm ash for syngas fuel production A Razak, H., Aini-razali, N.,, Abdullah, N., Setiabudi, H D., Yee, C S.

15:15-15:30 E5 Characterization of Bio-active Compounds Ex-tracted from Patchouli: Comparing Microwave-Assisted Hydrodistilla-tion And Hydrodistilla-tion Methods Nour Hamid Abdu-rahman and Sang-eethavani Sundarajan

F13 The implementation of lean manufacturing and ergonomics in Small Medium Enterprise – Case study A N M Rose, M F F Ab Rashid, N M Z Nik Mo-hamed and M A S Jubri

D7 Electro-oxidation of renewable glycerol to value added chemicals over phosphorous-doped Pt/MCNTs nano-particles Muhammad Sheraz Ahmad, Chin Kui Cheng, Huei Ruey Ong and Hamidah Abdullah

15:30-15:45 E4 Preliminary screening study using ffd on incor-poration of graphene oxide in pvc in mixed matrix membrane to enhance CO2/CH4 separation Raj, K. R., Sunarti, A. R.

F7 Development of Compli-ance Checklist System for Landed Housing Construction Activities Sharifah Nurul Haifa Syed Mohd Annuar, Ezrin Hani Sukadarin, Junaidah Zakaria and Hanida Abdul Aziz

C2 Total Site Planning for CO2 Utilisation and Storage Management Wan Norlinda Rosha-na Mohd Nawi, Sharifah Rafidah Wan Alwi, Zainuddin Abdul Manan, Jir í Jaromí r Klemes

Parallel Session 3

Track A: Separation & Purification Technology Venue: Meeting Room 3 Chairperson: Dr Mirta Widia

Track B: Safety & Loss Prevention Others Venue: Meeting Room 4 Chairperson: Dr. Nurud Suria Suhaimi

Track C: Control & Monitoring Venue: Meeting Room 5 Chairperson: Dr Wan Norlinda Roshana

8

Time Parallel Session 3

16:00-16:15 E3 Simulation of pressur-ized water scrubbing process for biogas purifi-cation Abu Seman, N., Harun, N

F4 Process Knowledge Man-agement System Based on Risk Based Process Safety Nur Izzati Pakhor Anuar, Hanida Abdul Aziz, Razali Ahmad

B10 Application of extend-ed method of classes for solving population balance equations and optimization study for crystallization process involving dissolution phenomena Siti Zubaidah Adnan and Noor Asma Fazli Abdul Samad

16:15-16:30 E6 Membrane performance profiling of forward osmosis membrane us-ing classical scaling tech-nique Rahman, A.F.H.A., Na-saruddin, T.S.L.M.T.A., Mohd Yunus, M.Y., Abu Seman, M.N., Harun, N.,

F12 Influence of natural smoke vent opening in stairway of multi-storey building Nurud, S.S., Abdullah, I., NorMariah, A., Rafee, B

B7 Inferential Control of Dividing Wall Column for High Product Purity – Case Study on Oleo-chemical Fatty Acid Fractionation Azrul Alias, Mohamad Rizza Othman

16:30-16:45 E7 Comparison and model-ling of optimal solvent extraction stages be-tween [p204] and [a336][p204] for the separation of europium and gadolinium Ismail, N. A., Mohd Yunus, M. Y., Aziz, M.A.A., and Abidin M. A.

F8 A review of Surfactant and recent studies of demulsification tech-niques and Influential parameters on breaking crude oil emulsions Saad M. Abed, N.H. Abdurahmanand Rosli Mohd Yunus

B11 Development of Power System for Wireless Water Trash Collector Mansor, M. A., Shamsuddin, P. N. F., Hadi, M. S. A., Ramli, R. M.,1

16:45-17:00 E8 Investigate the behav-iour of different acids and temperature in the digestion of monazite ore through pourbaix diagram Yahya, F. N., Rasid, R. A., Ibrahim, W. H. W.

F9 Review on the oil emul-sions and different re-cent techniques used of demulsification in the petroleum industry Saad M. Abed, N.H. Abdurahman and Rosli Mohd Yunus

9

Time Parallel Session 3

17:00-17:15 E10 Characterizations of surfactant synthesized from corn oil and used as demulsifier for w/o emulsion. M. A. Saad, N.H. Abdu-rahman and Rosli Mohd Yunus

F2 A review on possible approaches of anaerobic Biological processes for Palm oil mill effluent: Process, Quality, Ad-vantages, and Limita-tions Al-Amshawee, S. K., Yunus, M. Y., Azoddein, A. A.,

17:15-17:30 E12 Supported liquid mem-brane for acetic acid extraction: screening of membrane support prep-aration factors Syed Mohd Saufi

10

1st ProSES Symposium 2019 Committee Members

Prof. Dr.-Ing. habil. Jens-Uwe Repke (Technische Universitaet Berlin, GER) Prof. Dr. Yinlun Huang (Wayne State University, USA) Prof. Dr.-Ing. Fabian Herz (Anhalt University of Applied Sciences, GER) Prof. Dr. G.P. Rangaiah (National University of Singapore, SIN) Prof. Ir. Dr. Haslenda Hashim (Universiti Teknologi Malaysia, MAS) Prof. Ir. Dr. Sharifah Rafidah bt Wan Alwi (Universiti Teknologi Malaysia, MAS) Prof. Ir Dr. Dominic C. Y. Foo (University of Nottingham Malaysia, MAS) Prof. Ir. Dr. Zainal Ahmad (Universiti Sains Malaysia, MAS) Assoc. Prof. Dr. Syamsul Rizal Abd Shukor (Universiti Sains Malaysia, MAS) Assoc. Prof. Dr. Norliza Abdul Rahman (Universiti Kebangsaan Malaysia, MAS) Assoc. Prof. Dr. Rafiziana Md Kasmani (Universiti Teknologi Malaysia, MAS) Assoc. Prof. Dr. Shuhaimi Mahadzir (Universiti Teknologi Petronas, MAS) Assoc. Prof. Dr. Mimi Haryani Hassim (Universiti Teknologi Malaysia, MAS) Dr. Jarinah Mohd Ali (Universiti Kebangsaan Malaysia, MAS)

Scientific Committee

Host Organizing Committee

Chairman Dr.-Ing. Mohamad Rizza Othman CEng MIChemE Co-chairman Dr. Noorlisa Harun Secretary Dr. Ruwaida Abdul Rasid Bursary Dr. Nurul Sa’aadah Sulaiman Logistic & Technical Dr. Noor Asma Fazli Abdul Samad Dr. Syamsul Bahari Abdullah Ir. Ts. Dr. Siti Zubaidah Sulaiman Dr. Abdul Halim Abdul Razik Publication Miss Zainatul Bahiyah Handani Dr. Ruwaida Abdul Rasid Dr. Nor Khonisah Daud

Publicity & Promotion Dr. Noorlisa Harun Dr.-Ing. Aainaa Izyan Nafsun Dr. Ezrin Hani Sukadarin Dr. Hanida Abdul Aziz Sponsor Dr. Mohd Yusri Mohd Yunus Dr. Nurud Suria Suhaimi Dr. Mirta Widia Miss Nur Syafiqah Fauzan Protocol Dr. Nor Khonisah Daud Dr. Wan Norlinda Roshana Mohd Nawi

Email us at proses.symposium@ump.edu.my for any enquiry and feedback.

Website: https://sites.google.com/ump.edu.my/prosessymposium/home

https://sites.google.com/ump.edu.my/prosessymposium/committees/committees?authuser=0#h.p_Bgt72IEXoC48https://sites.google.com/ump.edu.my/prosessymposium/committees/committees?authuser=0#h.p_PNa37fYGofVxmailto:proses.symposium@ump.edu.my

A big THANK YOU to our generous sponsors!

GOLD Sponsor:

Turus Mentari Sdn Bhd, subsidiary of Aras Kuasa Sdn Bhd

SILVER Sponsors: