7/23/2019 Proe Workbook

http://slidepdf.com/reader/full/proe-workbook 1/38

EENNGGIINNEEEERRSS CCAADDDD CCEENNTTRREE ((PP)) LLIIMMIITTEEDD B6-Eureka Court, Lane beside Bata, Near Chermas, Ameerpet

Hyderabad, A.P., Ph.040-23755770, 23755774.V.IMP NOTE: Practice the Options that are dealt in the theory class for

the first 30-45 minutes and then practice the figures given here..

MODELLING

WORKBOOK

Geometric Modelling Workbook ProE, CATIA, UG, I-DEAS, SOLIDWORKS)

1

Sketcher

7/23/2019 Proe Workbook

http://slidepdf.com/reader/full/proe-workbook 2/38

EENNGGIINNEEEERRSS CCAADDDD CCEENNTTRREE ((PP)) LLIIMMIITTEEDD B6-Eureka Court, Lane beside Bata, Near Chermas, Ameerpet

Hyderabad, A.P., Ph.040-23755770, 23755774.V.IMP NOTE: Practice the Options that are dealt in the theory class for

the first 30-45 minutes and then practice the figures given here..

MODELLING

WORKBOOK

Geometric Modelling Workbook ProE, CATIA, UG, I-DEAS, SOLIDWORKS)

2

 

7/23/2019 Proe Workbook

http://slidepdf.com/reader/full/proe-workbook 3/38

EENNGGIINNEEEERRSS CCAADDDD CCEENNTTRREE ((PP)) LLIIMMIITTEEDD B6-Eureka Court, Lane beside Bata, Near Chermas, Ameerpet

Hyderabad, A.P., Ph.040-23755770, 23755774.V.IMP NOTE: Practice the Options that are dealt in the theory class for

the first 30-45 minutes and then practice the figures given here..

MODELLING

WORKBOOK

Geometric Modelling Workbook ProE, CATIA, UG, I-DEAS, SOLIDWORKS)

3

 

7/23/2019 Proe Workbook

http://slidepdf.com/reader/full/proe-workbook 4/38

EENNGGIINNEEEERRSS CCAADDDD CCEENNTTRREE ((PP)) LLIIMMIITTEEDD B6-Eureka Court, Lane beside Bata, Near Chermas, Ameerpet

Hyderabad, A.P., Ph.040-23755770, 23755774.V.IMP NOTE: Practice the Options that are dealt in the theory class for

the first 30-45 minutes and then practice the figures given here..

MODELLING

WORKBOOK

Geometric Modelling Workbook ProE, CATIA, UG, I-DEAS, SOLIDWORKS)

4

 

7/23/2019 Proe Workbook

http://slidepdf.com/reader/full/proe-workbook 5/38

EENNGGIINNEEEERRSS CCAADDDD CCEENNTTRREE ((PP)) LLIIMMIITTEEDD B6-Eureka Court, Lane beside Bata, Near Chermas, Ameerpet

Hyderabad, A.P., Ph.040-23755770, 23755774.V.IMP NOTE: Practice the Options that are dealt in the theory class for

the first 30-45 minutes and then practice the figures given here..

MODELLING

WORKBOOK

Geometric Modelling Workbook ProE, CATIA, UG, I-DEAS, SOLIDWORKS)

5

 

7/23/2019 Proe Workbook

http://slidepdf.com/reader/full/proe-workbook 6/38

EENNGGIINNEEEERRSS CCAADDDD CCEENNTTRREE ((PP)) LLIIMMIITTEEDD B6-Eureka Court, Lane beside Bata, Near Chermas, Ameerpet

Hyderabad, A.P., Ph.040-23755770, 23755774.V.IMP NOTE: Practice the Options that are dealt in the theory class for

the first 30-45 minutes and then practice the figures given here..

MODELLING

WORKBOOK

Geometric Modelling Workbook ProE, CATIA, UG, I-DEAS, SOLIDWORKS)

6

 

7/23/2019 Proe Workbook

http://slidepdf.com/reader/full/proe-workbook 7/38

EENNGGIINNEEEERRSS CCAADDDD CCEENNTTRREE ((PP)) LLIIMMIITTEEDD B6-Eureka Court, Lane beside Bata, Near Chermas, Ameerpet

Hyderabad, A.P., Ph.040-23755770, 23755774.V.IMP NOTE: Practice the Options that are dealt in the theory class for

the first 30-45 minutes and then practice the figures given here..

MODELLING

WORKBOOK

Geometric Modelling Workbook ProE, CATIA, UG, I-DEAS, SOLIDWORKS)

7

7/23/2019 Proe Workbook

http://slidepdf.com/reader/full/proe-workbook 8/38

EENNGGIINNEEEERRSS CCAADDDD CCEENNTTRREE ((PP)) LLIIMMIITTEEDD B6-Eureka Court, Lane beside Bata, Near Chermas, Ameerpet

Hyderabad, A.P., Ph.040-23755770, 23755774.V.IMP NOTE: Practice the Options that are dealt in the theory class for

the first 30-45 minutes and then practice the figures given here..

MODELLING

WORKBOOK

Geometric Modelling Workbook ProE, CATIA, UG, I-DEAS, SOLIDWORKS)

8

 

7/23/2019 Proe Workbook

http://slidepdf.com/reader/full/proe-workbook 9/38

EENNGGIINNEEEERRSS CCAADDDD CCEENNTTRREE ((PP)) LLIIMMIITTEEDD B6-Eureka Court, Lane beside Bata, Near Chermas, Ameerpet

Hyderabad, A.P., Ph.040-23755770, 23755774.V.IMP NOTE: Practice the Options that are dealt in the theory class for

the first 30-45 minutes and then practice the figures given here..

MODELLING

WORKBOOK

Geometric Modelling Workbook ProE, CATIA, UG, I-DEAS, SOLIDWORKS)

9

 

7/23/2019 Proe Workbook

http://slidepdf.com/reader/full/proe-workbook 10/38

EENNGGIINNEEEERRSS CCAADDDD CCEENNTTRREE ((PP)) LLIIMMIITTEEDD B6-Eureka Court, Lane beside Bata, Near Chermas, Ameerpet

Hyderabad, A.P., Ph.040-23755770, 23755774.V.IMP NOTE: Practice the Options that are dealt in the theory class for

the first 30-45 minutes and then practice the figures given here..

MODELLING

WORKBOOK

Geometric Modelling Workbook ProE, CATIA, UG, I-DEAS, SOLIDWORKS)

10

 

7/23/2019 Proe Workbook

http://slidepdf.com/reader/full/proe-workbook 11/38

EENNGGIINNEEEERRSS CCAADDDD CCEENNTTRREE ((PP)) LLIIMMIITTEEDD B6-Eureka Court, Lane beside Bata, Near Chermas, Ameerpet

Hyderabad, A.P., Ph.040-23755770, 23755774.V.IMP NOTE: Practice the Options that are dealt in the theory class for

the first 30-45 minutes and then practice the figures given here..

MODELLING

WORKBOOK

Geometric Modelling Workbook ProE, CATIA, UG, I-DEAS, SOLIDWORKS)

11

Part Modeling

7/23/2019 Proe Workbook

http://slidepdf.com/reader/full/proe-workbook 12/38

EENNGGIINNEEEERRSS CCAADDDD CCEENNTTRREE ((PP)) LLIIMMIITTEEDD B6-Eureka Court, Lane beside Bata, Near Chermas, Ameerpet

Hyderabad, A.P., Ph.040-23755770, 23755774.V.IMP NOTE: Practice the Options that are dealt in the theory class for

the first 30-45 minutes and then practice the figures given here..

MODELLING

WORKBOOK

Geometric Modelling Workbook ProE, CATIA, UG, I-DEAS, SOLIDWORKS)

12

 

7/23/2019 Proe Workbook

http://slidepdf.com/reader/full/proe-workbook 13/38

EENNGGIINNEEEERRSS CCAADDDD CCEENNTTRREE ((PP)) LLIIMMIITTEEDD B6-Eureka Court, Lane beside Bata, Near Chermas, Ameerpet

Hyderabad, A.P., Ph.040-23755770, 23755774.V.IMP NOTE: Practice the Options that are dealt in the theory class for

the first 30-45 minutes and then practice the figures given here..

MODELLING

WORKBOOK

Geometric Modelling Workbook ProE, CATIA, UG, I-DEAS, SOLIDWORKS)

13

7/23/2019 Proe Workbook

http://slidepdf.com/reader/full/proe-workbook 14/38

EENNGGIINNEEEERRSS CCAADDDD CCEENNTTRREE ((PP)) LLIIMMIITTEEDD B6-Eureka Court, Lane beside Bata, Near Chermas, Ameerpet

Hyderabad, A.P., Ph.040-23755770, 23755774.V.IMP NOTE: Practice the Options that are dealt in the theory class for

the first 30-45 minutes and then practice the figures given here..

MODELLING

WORKBOOK

Geometric Modelling Workbook ProE, CATIA, UG, I-DEAS, SOLIDWORKS)

14

 

7/23/2019 Proe Workbook

http://slidepdf.com/reader/full/proe-workbook 15/38

EENNGGIINNEEEERRSS CCAADDDD CCEENNTTRREE ((PP)) LLIIMMIITTEEDD B6-Eureka Court, Lane beside Bata, Near Chermas, Ameerpet

Hyderabad, A.P., Ph.040-23755770, 23755774.V.IMP NOTE: Practice the Options that are dealt in the theory class for

the first 30-45 minutes and then practice the figures given here..

MODELLING

WORKBOOK

Geometric Modelling Workbook ProE, CATIA, UG, I-DEAS, SOLIDWORKS)

15

 

7/23/2019 Proe Workbook

http://slidepdf.com/reader/full/proe-workbook 16/38

EENNGGIINNEEEERRSS CCAADDDD CCEENNTTRREE ((PP)) LLIIMMIITTEEDD B6-Eureka Court, Lane beside Bata, Near Chermas, Ameerpet

Hyderabad, A.P., Ph.040-23755770, 23755774.V.IMP NOTE: Practice the Options that are dealt in the theory class for

the first 30-45 minutes and then practice the figures given here..

MODELLING

WORKBOOK

Geometric Modelling Workbook ProE, CATIA, UG, I-DEAS, SOLIDWORKS)

16

 

7/23/2019 Proe Workbook

http://slidepdf.com/reader/full/proe-workbook 17/38

EENNGGIINNEEEERRSS CCAADDDD CCEENNTTRREE ((PP)) LLIIMMIITTEEDD B6-Eureka Court, Lane beside Bata, Near Chermas, Ameerpet

Hyderabad, A.P., Ph.040-23755770, 23755774.V.IMP NOTE: Practice the Options that are dealt in the theory class for

the first 30-45 minutes and then practice the figures given here..

MODELLING

WORKBOOK

Geometric Modelling Workbook ProE, CATIA, UG, I-DEAS, SOLIDWORKS)

17

 

7/23/2019 Proe Workbook

http://slidepdf.com/reader/full/proe-workbook 18/38

EENNGGIINNEEEERRSS CCAADDDD CCEENNTTRREE ((PP)) LLIIMMIITTEEDD B6-Eureka Court, Lane beside Bata, Near Chermas, Ameerpet

Hyderabad, A.P., Ph.040-23755770, 23755774.V.IMP NOTE: Practice the Options that are dealt in the theory class for

the first 30-45 minutes and then practice the figures given here..

MODELLING

WORKBOOK

Geometric Modelling Workbook ProE, CATIA, UG, I-DEAS, SOLIDWORKS)

18

 

7/23/2019 Proe Workbook

http://slidepdf.com/reader/full/proe-workbook 19/38

EENNGGIINNEEEERRSS CCAADDDD CCEENNTTRREE ((PP)) LLIIMMIITTEEDD B6-Eureka Court, Lane beside Bata, Near Chermas, Ameerpet

Hyderabad, A.P., Ph.040-23755770, 23755774.V.IMP NOTE: Practice the Options that are dealt in the theory class for

the first 30-45 minutes and then practice the figures given here..

MODELLING

WORKBOOK

Geometric Modelling Workbook ProE, CATIA, UG, I-DEAS, SOLIDWORKS)

19

 

7/23/2019 Proe Workbook

http://slidepdf.com/reader/full/proe-workbook 20/38

EENNGGIINNEEEERRSS CCAADDDD CCEENNTTRREE ((PP)) LLIIMMIITTEEDD B6-Eureka Court, Lane beside Bata, Near Chermas, Ameerpet

Hyderabad, A.P., Ph.040-23755770, 23755774.V.IMP NOTE: Practice the Options that are dealt in the theory class for

the first 30-45 minutes and then practice the figures given here..

MODELLING

WORKBOOK

Geometric Modelling Workbook ProE, CATIA, UG, I-DEAS, SOLIDWORKS)

20

7/23/2019 Proe Workbook

http://slidepdf.com/reader/full/proe-workbook 21/38

EENNGGIINNEEEERRSS CCAADDDD CCEENNTTRREE ((PP)) LLIIMMIITTEEDD B6-Eureka Court, Lane beside Bata, Near Chermas, Ameerpet

Hyderabad, A.P., Ph.040-23755770, 23755774.V.IMP NOTE: Practice the Options that are dealt in the theory class for

the first 30-45 minutes and then practice the figures given here..

MODELLING

WORKBOOK

Geometric Modelling Workbook ProE, CATIA, UG, I-DEAS, SOLIDWORKS)

21

 

Assume the hole diameter as 1 unit and relatively assume dimensions for the entire component,

draw Standard views of the above figure, show it to your staff and then model them using any

software.

7/23/2019 Proe Workbook

http://slidepdf.com/reader/full/proe-workbook 22/38

EENNGGIINNEEEERRSS CCAADDDD CCEENNTTRREE ((PP)) LLIIMMIITTEEDD B6-Eureka Court, Lane beside Bata, Near Chermas, Ameerpet

Hyderabad, A.P., Ph.040-23755770, 23755774.V.IMP NOTE: Practice the Options that are dealt in the theory class for

the first 30-45 minutes and then practice the figures given here..

MODELLING

WORKBOOK

Geometric Modelling Workbook ProE, CATIA, UG, I-DEAS, SOLIDWORKS)

22

 

Relatively assume dimensions for the entire component, draw required Sectional views of the

above figure, show it to your staff and then model them using any software. 

NO TRIAL AND ERROR BUSINESS

7/23/2019 Proe Workbook

http://slidepdf.com/reader/full/proe-workbook 23/38

EENNGGIINNEEEERRSS CCAADDDD CCEENNTTRREE ((PP)) LLIIMMIITTEEDD B6-Eureka Court, Lane beside Bata, Near Chermas, Ameerpet

Hyderabad, A.P., Ph.040-23755770, 23755774.V.IMP NOTE: Practice the Options that are dealt in the theory class for

the first 30-45 minutes and then practice the figures given here..

MODELLING

WORKBOOK

Geometric Modelling Workbook ProE, CATIA, UG, I-DEAS, SOLIDWORKS)

23

 

7/23/2019 Proe Workbook

http://slidepdf.com/reader/full/proe-workbook 24/38

EENNGGIINNEEEERRSS CCAADDDD CCEENNTTRREE ((PP)) LLIIMMIITTEEDD B6-Eureka Court, Lane beside Bata, Near Chermas, Ameerpet

Hyderabad, A.P., Ph.040-23755770, 23755774.V.IMP NOTE: Practice the Options that are dealt in the theory class for

the first 30-45 minutes and then practice the figures given here..

MODELLING

WORKBOOK

Geometric Modelling Workbook ProE, CATIA, UG, I-DEAS, SOLIDWORKS)

24

 

7/23/2019 Proe Workbook

http://slidepdf.com/reader/full/proe-workbook 25/38

EENNGGIINNEEEERRSS CCAADDDD CCEENNTTRREE ((PP)) LLIIMMIITTEEDD B6-Eureka Court, Lane beside Bata, Near Chermas, Ameerpet

Hyderabad, A.P., Ph.040-23755770, 23755774.V.IMP NOTE: Practice the Options that are dealt in the theory class for

the first 30-45 minutes and then practice the figures given here..

MODELLING

WORKBOOK

Geometric Modelling Workbook ProE, CATIA, UG, I-DEAS, SOLIDWORKS)

25

 

7/23/2019 Proe Workbook

http://slidepdf.com/reader/full/proe-workbook 26/38

EENNGGIINNEEEERRSS CCAADDDD CCEENNTTRREE ((PP)) LLIIMMIITTEEDD B6-Eureka Court, Lane beside Bata, Near Chermas, Ameerpet

Hyderabad, A.P., Ph.040-23755770, 23755774.V.IMP NOTE: Practice the Options that are dealt in the theory class for

the first 30-45 minutes and then practice the figures given here..

MODELLING

WORKBOOK

Geometric Modelling Workbook ProE, CATIA, UG, I-DEAS, SOLIDWORKS)

26

 

7/23/2019 Proe Workbook

http://slidepdf.com/reader/full/proe-workbook 27/38

EENNGGIINNEEEERRSS CCAADDDD CCEENNTTRREE ((PP)) LLIIMMIITTEEDD B6-Eureka Court, Lane beside Bata, Near Chermas, Ameerpet

Hyderabad, A.P., Ph.040-23755770, 23755774.V.IMP NOTE: Practice the Options that are dealt in the theory class for

the first 30-45 minutes and then practice the figures given here..

MODELLING

WORKBOOK

Geometric Modelling Workbook ProE, CATIA, UG, I-DEAS, SOLIDWORKS)

27

 

Develop the below parts….

Hole diameter: 0.5 Inch or 1 unit.

Assume the bolt diameter as ½ inch and relatively assume dimensions for the entire

component, draw Standard views of the above figure, show it to your staff and then model them

using any software. 

NO TRIAL AND ERROR BUSINESS 

7/23/2019 Proe Workbook

http://slidepdf.com/reader/full/proe-workbook 28/38

EENNGGIINNEEEERRSS CCAADDDD CCEENNTTRREE ((PP)) LLIIMMIITTEEDD B6-Eureka Court, Lane beside Bata, Near Chermas, Ameerpet

Hyderabad, A.P., Ph.040-23755770, 23755774.V.IMP NOTE: Practice the Options that are dealt in the theory class for

the first 30-45 minutes and then practice the figures given here..

MODELLING

WORKBOOK

Geometric Modelling Workbook ProE, CATIA, UG, I-DEAS, SOLIDWORKS)

28

 

Relatively assume dimensions for the entire component, draw Standard views of the above

figure, show it to your staff and then model them using any software. 

NO TRIAL AND ERROR BUSINESS 

7/23/2019 Proe Workbook

http://slidepdf.com/reader/full/proe-workbook 29/38

EENNGGIINNEEEERRSS CCAADDDD CCEENNTTRREE ((PP)) LLIIMMIITTEEDD B6-Eureka Court, Lane beside Bata, Near Chermas, Ameerpet

Hyderabad, A.P., Ph.040-23755770, 23755774.V.IMP NOTE: Practice the Options that are dealt in the theory class for

the first 30-45 minutes and then practice the figures given here..

MODELLING

WORKBOOK

Geometric Modelling Workbook ProE, CATIA, UG, I-DEAS, SOLIDWORKS)

29

 

NO TRIAL AND ERROR BUSINESS 

7/23/2019 Proe Workbook

http://slidepdf.com/reader/full/proe-workbook 30/38

EENNGGIINNEEEERRSS CCAADDDD CCEENNTTRREE ((PP)) LLIIMMIITTEEDD B6-Eureka Court, Lane beside Bata, Near Chermas, Ameerpet

Hyderabad, A.P., Ph.040-23755770, 23755774.V.IMP NOTE: Practice the Options that are dealt in the theory class for

the first 30-45 minutes and then practice the figures given here..

MODELLING

WORKBOOK

Geometric Modelling Workbook ProE, CATIA, UG, I-DEAS, SOLIDWORKS)

30

Assembly Practice – 1

(The students are required to complete these assemblies, while advanced part modeling isgoing on and save carefully in respective folders. You are required to retrieve them andassemble them when assembly modeling is taught in the theory classes. The drawings are to

 be generated later on for the same assemblies/ parts. The Detailing also has to be done forthe same models. So keep track of these assemblies carefully.)

BEARING ECCENTRIC

7/23/2019 Proe Workbook

http://slidepdf.com/reader/full/proe-workbook 31/38

EENNGGIINNEEEERRSS CCAADDDD CCEENNTTRREE ((PP)) LLIIMMIITTEEDD B6-Eureka Court, Lane beside Bata, Near Chermas, Ameerpet

Hyderabad, A.P., Ph.040-23755770, 23755774.V.IMP NOTE: Practice the Options that are dealt in the theory class for

the first 30-45 minutes and then practice the figures given here..

MODELLING

WORKBOOK

Geometric Modelling Workbook ProE, CATIA, UG, I-DEAS, SOLIDWORKS)

31

Assembly Practice – 2(The students are required to complete these assemblies, while advanced part modeling is

going on and save carefully in respective folders. You are required to retrieve them andassemble them when assembly modeling is taught in the theory classes. The drawings are to be

generated later on for the same assemblies/ parts. The Detailing also has to be done for the

same models. So keep track of these assemblies carefully.) 

7/23/2019 Proe Workbook

http://slidepdf.com/reader/full/proe-workbook 32/38

EENNGGIINNEEEERRSS CCAADDDD CCEENNTTRREE ((PP)) LLIIMMIITTEEDD B6-Eureka Court, Lane beside Bata, Near Chermas, Ameerpet

Hyderabad, A.P., Ph.040-23755770, 23755774.V.IMP NOTE: Practice the Options that are dealt in the theory class for

the first 30-45 minutes and then practice the figures given here..

MODELLING

WORKBOOK

Geometric Modelling Workbook ProE, CATIA, UG, I-DEAS, SOLIDWORKS)

32

 

7/23/2019 Proe Workbook

http://slidepdf.com/reader/full/proe-workbook 33/38

EENNGGIINNEEEERRSS CCAADDDD CCEENNTTRREE ((PP)) LLIIMMIITTEEDD B6-Eureka Court, Lane beside Bata, Near Chermas, Ameerpet

Hyderabad, A.P., Ph.040-23755770, 23755774.V.IMP NOTE: Practice the Options that are dealt in the theory class for

the first 30-45 minutes and then practice the figures given here..

MODELLING

WORKBOOK

Geometric Modelling Workbook ProE, CATIA, UG, I-DEAS, SOLIDWORKS)

33

 

7/23/2019 Proe Workbook

http://slidepdf.com/reader/full/proe-workbook 34/38

EENNGGIINNEEEERRSS CCAADDDD CCEENNTTRREE ((PP)) LLIIMMIITTEEDD B6-Eureka Court, Lane beside Bata, Near Chermas, Ameerpet

Hyderabad, A.P., Ph.040-23755770, 23755774.V.IMP NOTE: Practice the Options that are dealt in the theory class for

the first 30-45 minutes and then practice the figures given here..

MODELLING

WORKBOOK

Geometric Modelling Workbook ProE, CATIA, UG, I-DEAS, SOLIDWORKS)

34

Assembly practice – 3(The students are required to complete these assemblies, while advanced part modeling is

going on and save carefully in respective folders. You are required to retrieve them andassemble them when assembly modeling is taught in the theory classes. The drawings are to be

generated later on for the same assemblies/ parts. The Detailing also has to be done for the

same models. So keep track of these assemblies carefully.) 

7/23/2019 Proe Workbook

http://slidepdf.com/reader/full/proe-workbook 35/38

EENNGGIINNEEEERRSS CCAADDDD CCEENNTTRREE ((PP)) LLIIMMIITTEEDD B6-Eureka Court, Lane beside Bata, Near Chermas, Ameerpet

Hyderabad, A.P., Ph.040-23755770, 23755774.V.IMP NOTE: Practice the Options that are dealt in the theory class for

the first 30-45 minutes and then practice the figures given here..

MODELLING

WORKBOOK

Geometric Modelling Workbook ProE, CATIA, UG, I-DEAS, SOLIDWORKS)

35

Assembly Practice-4

(The students are required to complete these assemblies, while advanced part modeling isgoing on and save carefully in respective folders. You are required to retrieve them and

assemble them when assembly modeling is taught in the theory classes. The drawings are to be

generated later on for the same assemblies/ parts. The Detailing also has to be done for thesame models. So keep track of these assemblies carefully.) 

7/23/2019 Proe Workbook

http://slidepdf.com/reader/full/proe-workbook 36/38

EENNGGIINNEEEERRSS CCAADDDD CCEENNTTRREE ((PP)) LLIIMMIITTEEDD B6-Eureka Court, Lane beside Bata, Near Chermas, Ameerpet

Hyderabad, A.P., Ph.040-23755770, 23755774.V.IMP NOTE: Practice the Options that are dealt in the theory class for

the first 30-45 minutes and then practice the figures given here..

MODELLING

WORKBOOK

Geometric Modelling Workbook ProE, CATIA, UG, I-DEAS, SOLIDWORKS)

36

Assembly Practice-5 (Pulley) (Rotate the pdf file 90 degrees anti clockwise, zoom and then make the assembly) 

7/23/2019 Proe Workbook

http://slidepdf.com/reader/full/proe-workbook 37/38

EENNGGIINNEEEERRSS CCAADDDD CCEENNTTRREE ((PP)) LLIIMMIITTEEDD B6-Eureka Court, Lane beside Bata, Near Chermas, Ameerpet

Hyderabad, A.P., Ph.040-23755770, 23755774.V.IMP NOTE: Practice the Options that are dealt in the theory class for

the first 30-45 minutes and then practice the figures given here..

MODELLING

WORKBOOK

Geometric Modelling Workbook ProE, CATIA, UG, I-DEAS, SOLIDWORKS)

37

 For more inputs in drawing, see pdf file

“Pro/E2001-Drawing Task Notes” in the workbook folder

END OF CORE SYLLABUS

 Attn: Students who have taken Integrated Pro/ENGINEER

For tasks on Surfacing, Sheet metal, Mould Design andManufacturing see the PDF files in your folder…

Examples as we have in solid modeling cannot be given for the above modules.

CATIA STUDENTS MAY REFER CATIA SURFACES – FREE STYE & GSD- SHEETMETAL PDF FILES FORUNDERSTANDING VARIOUS FEATURES/ OPTIONS AVAILABLE IN CATIA.

“Master Program, PG Diploma, Design Trainee and Design Engineer PPT) Program Engineers”, will be awarded with

major projects separately between 4.30-9pm, under the guidance of FY05’s PPT Staff and Other Senior staff.

Mini Projects will be given from 7-10am for the above category students as stated in your curriculum.

Note: - It is mandatory for all Master Program People who have taken admissions after 4.6.2005 to work as

associate staff for 2 courses – for one batch. 

“ANIMALS LEARN BUT CANNOT TEACH…HUMANS CAN LEARN AND ALSO TEACH….

THAT’S THE PRIME DIFFERENCE BETWEEN THE TWO”-----------Anonymous

Let us give back to the society that we received from it….Let us all contribute “OUR PART” for a better world…

7/23/2019 Proe Workbook

http://slidepdf.com/reader/full/proe-workbook 38/38

EENNGGIINNEEEERRSS CCAADDDD CCEENNTTRREE ((PP)) LLIIMMIITTEEDD B6-Eureka Court, Lane beside Bata, Near Chermas, Ameerpet

Hyderabad, A.P., Ph.040-23755770, 23755774.V.IMP NOTE: Practice the Options that are dealt in the theory class for

the first 30-45 minutes and then practice the figures given here..

MODELLING

WORKBOOK

Day Module Pages/ Task

1 Sketcher 1,2

2 Sketcher 3,,4,5,63 Sketcher 7,8,9, 10

4 EXAM GENERAL & Sketcher

5 Part Modeling 11,12

6 Part Modeling 13,14

7 Part Modeling 15,16

8 Part Modeling 17,18

9 Part Modeling 19,20

10 Part Modeling 21,22

11 Part Modeling 23,24

12 Part Modeling 25,26

13 Part Modeling 27

14 EXAM

15 Part Modeling 28,29

16 Part Modeling bearing eccentric17 Part Modeling bearing eccentric

18 Part Modeling Shaft Support Assembly

19 Part Modeling Knuckle Joint

20 Part Modeling Universal coupling

21 Doubts class PULLEY Assembly

22 assembly PULLEY Assembly

23 assembly Pistol barrel or Vice Assembly (anyone)

24 assembly Pistol barrel or Vice Assembly (anyone)

25 drawing Pistol barrel or Vice Assembly (anyone)

26 drawing Pistol barrel or Vice Assembly (anyone)

27 drawing Pistol barrel or Vice Assembly (anyone)

28 EXAM EXAM- 10 component assembly

29 Doubts EXAM- 10 component assembly

30 Doubts EXAM- 10 component assembly

31 Surfaces Refer 2001 Task PDF files in your system

32 Surfaces Refer 2001 Task PDF files in your system

33 Surfaces Refer 2001 Task PDF files in your system

34 Sheet metal Refer 2001 Task PDF files in your system

35 Sheet metal Refer 2001 Task PDF files in your system

36 SUNDAY-EXAM Refer 2001 Task PDF files in your system

37 Sheet metal Refer 2001 Task PDF files in your system

38 Manufacturing Refer 2001 Task PDF files in your system

39 Manufacturing Refer 2001 Task PDF files in your system

40 Manufacturing Refer 2001 Task PDF files in your system

41 Mould Design Refer 2001 Task PDF files in your system

42 Mould Design Refer 2001 Task PDF files in your system

43 PROJECT ELG. EXAM Refer 2001 Task PDF files in your system

44 Mould Design Refer 2001 Task PDF files in your system

45 Discussion Project

46 Mold Design Doubts Project

47 Manufac-Doubts Project

48 Surfaces-Doubts Project

49 Sh t tl D bt P j t