produktkatalog schrauben - du pont · xxx 0000 · timber construction screw, countersunk with...
TRANSCRIPT
Produktkatalog SchraubenProduct Catalogue Screws
www.jdplus.de
© w
ww
.rls
.de
07/1
0
Die neueProduktfamilieThe newproduct line
UniversalschraubenMultipurpose Screws
DielenschraubenFloorboard Screws
KonstruktionsschraubenTimber Construction Screws
TerrassenschraubenDecking Screws
FensterrahmenschraubenWindow Frame Anchors
SortimentskästenAssortment Cases
Inhaltsverzeichnis · Index
www.jdplus.deJD Plus Universalschrauben · JD Plus Multipurpose ScrewsWGR 1122 · Universalschraube, Senkkopf-Z, VollgewindeXXX 0000 · Multipurpose Screw, Countersunk-Z, Full thread
WGR 1123 · Universalschraube, Senkkopf-Z, TeilgewindeXXX 0000 · Multipurpose Screw, Countersunk-Z, Partial thread
WGR 1124 · Universalschraube, Senkkopf mit I-Stern, Teilgewinde mit Fräsrippen unter dem KopfXXX 0000 · Multipurpose Screw, Countersunk with I-Star recess, Partial thread with self-countersinking ribs under the head
WGR 1125 · Universalschraube, Senkkopf mit I-Stern, Vollgewinde mit Fräsrippen unter dem KopfXXX 0000 · Multipurpose Screw, Countersunk with I-Star recess, Full thread with self-countersinking ribs under the head
WGR 1126 · Universalschraube, Pan-Head-ZXXX 0000 · Multipurpose Screw, Pan-Head-Z
WGR 1127 · Universalschraube, Pan-Head mit I-SternXXX 0000 · Multipurpose Screw, Pan-Head with I-Star
WGR 3788 · Universalschraube, Senkkopf mit I-Stern, Teilgewinde mit Fräsrippen unter dem Kopf, rostfrei, A2XXX 0000 · Multipurpose Screw, Countersunk with I-Star, Partial thread with self-countersinking ribs under the head, stainless steel, A2
WGR 3789 · Universalschraube, Senkkopf mit I-Stern, Vollgewinde mit Fräsrippen unter dem Kopf, rostfrei, A2XXX 0000 · Multipurpose Screw, Countersunk with I-Star, Full thread with self-countersinking ribs under the head, stainless steel, A2
JD Plus Dielenschrauben · JD Plus Floorboard ScrewsWGR 1168 · Dielenschraube, Senkkopf mit I-Stern und FräsrippenXXX 0000 · Floorboard Screw, Countersunk with I-Star recess and self-countersinking ribs
JD Plus Konstruktionsschrauben · JD Plus Timber Construction Screws WGR 1141 · Konstruktionsschraube für den Holzbau, Senkkopf mit I-Stern, Teilgewinde, Fräsrippen und Längenprägung. Mit bauaufsichtlicher Zulassung.XXX 0000 · Timber Construction Screw, Countersunk with I-Star recess, Partial thread with self-countersinking ribs and razor sharp tip with cutting notch. Approved by the German Building Authorities.
WGR 1148 · Konstruktionsschraube für den Holzbau, Tellerkopf mit I-Stern, Teilgewinde, Fräsrippen und Längenprägung. Mit bauaufsichtlicher Zulassung.XXX 0000 · Timber Construction Screw, Flange head with I-Star recess, Partial thread with self-countersinking ribs and razor sharp tip with cutting notch. Approved by the German Building Authorities.
JD Plus Terrassenschrauben · JD Plus Decking ScrewsWGR 3699 · Terrassenschraube, Senkkopf mit I-Stern und Fräsrippen, rostfrei, A2XXX 0000 · Decking Screw, Countersunk with I-Star recess and self-countersinking ribs, stainless steel, A2
WGR 3034 · Terrassenschraube, Senkkopf mit I-Stern und Fräsrippen, rostfrei, A4XXX 0000 · Decking Screw, Countersunk with I-Star recess and self-countersinking ribs, stainless steel, A4
JD Plus Fensterrahmenschrauben · JD Plus Window Frame AnchorsWGR 6640 · Fensterrahmenschraube, Senkkopf mit I-Stern für Kunststoff-ProfileXXX 0000 · Window Frame Anchor, Countersunk with I-Star for plastic profiles
WGR 6641 · Fensterrahmenschraube, kleiner Kopf mit I-Stern für HolzprofileXXX 0000 · Window Frame Anchor, Small head with I-Star for wood profiles
JD Plus Sortimentskästen · JD Plus Assortment CasesArt. 8638 · Universalschrauben, Senkkopf mit I-Stern, verzinktXXX 0000 · Multipurpose Screws, Countersunk with I-Star recess, zinc plated
Art. 8627 · Universalschrauben, Senkkopf mit I-Stern, gelb verzinktXXX 0000 · Multipurpose Screws, Countersunk with I-Star recess, zinc plated yellow chromated
Art. 8637 · Universalschrauben, Senkkopf mit I-Stern, Edelstahl, A2XXX 0000 · Multipurpose Screws, Countersunk with I-Star recess, stainless steel, A2
Art. 8628 · Universalschrauben, Halbrundkopf (Pan-Head) mit Kreuzschlitz, verzinktXXX 0000 · Multipurpose Screws, Pan-Head with cross recess, zinc plated
Art. 8629 · Universalschrauben, Halbrundkopf (Pan-Head) mit I-Stern, verzinktXXX 0000 · Multipurpose Screws, Pan-Head with I-Star recess, zinc plated
S. 6-8
S. 9-10
S. 11-13
S. 14-15
S. 16-18
S. 19-20
S. 23-24
S. 25
S. 28
S. 32-33
S. 34-35
S. 38
S. 38
S. 42
S. 43
S. 44
S. 44
S. 45
S. 45
S. 45
UniversalschraubenMultipurpose Screws
5
www.jdplus.de
Einschrauben
ohne
vorzubohren!
The Bionic Screw!
No pilot holerequired,
ever!
Sichere Verarbeitung / Optimised head design
Unter dem Schraubenkopf befindet sich ein Doppelwinkel, der für eine sichere Verarbeitung, einen hervorragenden Klingensitz sowie einen optimalen Kraftschluss sorgt. Fräsrippen beim I-Stern ermöglichen eine perfekte Versenkung und einen sauberen Abschluss mit der Oberfläche.
The angle of the head has been designed with a double countersink to allow for extra deep bit engagement to provide safe and secure driving of the screw. The self countersinking ribs of the I-Star version forms a perfect countersink with a tidy burr free finish.
1 Komfortable Verarbeitung / Low driving torque
Die Spitze sowie das einzigartige Gewinde inklusive der optimalen Gleitbeschichtung ermöglichen schnellere Einschraubmomente und höhere Halte-kräfte. Ein Vorbohren ist daher nícht erforderlich.
The patented thread design along with unique lubricant provides faster screw insertion times, coupled with a superior pull out resistance than standard screws.
2
Spleißfreie Verarbeitung / Drives in without splitting the wood
Die patentierte Gewindeausprägung sorgt dafür, dass sich die Universalschrauben ohne Materialspleißung verarbeiten lassen; selbst bei geringen Randabständen.
The can be driven into all types of wood without the use of a pilot hole and without splitting the wood, even close to the edge!
3Variable Verarbeitung / Truly multipurpose
Die Universalschrauben eignen sich für einen universellen Einsatz, beispielsweise für Hartholz, Spanplatten, Kunststoffe und andere Materialien. Weitere Kopfformen und Werkstoffe erhältlich.
The multipurpose screw is suitable for most applications, hard wood, soft wood, chipboard, PVC and many other materials. Other head designs and materials are available to suit your application.
4
Patentiert!Patented!
Abmessungen · Dimensions
6
Universalschraube · Multipurpose Screw
WGR 1122 · Senkkopf-Z, Vollgewinde · Countersunk-Z, Full thread
Gewinde-ØThread-Ø
d/mm
Kopf-ØHead-Ø
dk
Kopfhöhe Height of head
k
KreuzschlitzCross recess
m
3,0 6 1,8 1 3
3,5 7 2,1 2 4
4,0 8 2,4 2 4,2
4,5 9 2,7 2 4,4
5,0 10 2,9 2 5
6,0 12 3,4 3 6,3
www.jdplus.de
Universalschraube · Multipurpose Screw
WGR 1122 · Senkkopf-Z, Vollgewinde, gleitbeschichtet · Countersunk-Z, Full thread, waxed
Gewinde-ØThread-Ø
d/mm
LängeLength
l/mm
InhaltContent
Stück/Pieces
PreisPrice
€/100 Stück/Pieces10 1000 1,45
12 1000 1,45
13 1000 1,45
15 1000 1,50
16 1000 1,65
17 1000 1,65
20 1000 1,75
25 1000 1,85
30 1000 2,45
35 1000 2,85
40 1000 3,85
45 1000 5,15
12 1000 1,85
13 1000 1,85
15 1000 1,85
16 1000 1,85
17 1000 1,85
20 1000 2,10
25 1000 2,30
30 1000 2,50
35 1000 3,10
3,0
3,5
3,0
3,5
001
galvanisch verzinkt
zinc plated
021
galvanisch verzinkt
gelb chromatiert
zinc plated
yellow chromated
Gewinde mit patentiertem SternschliffPatented star cut thread
7
Uni
vers
alsc
hrau
ben
M
ultip
urp
ose
Scr
ews
www.jdplus.de
Universalschraube · Multipurpose Screw
WGR 1122 · Senkkopf-Z, Vollgewinde, gleitbeschichtet · Countersunk-Z, Full thread, waxed
Gewinde-ØThread-Ø
d/mm
LängeLength
l/mm
InhaltContent
Stück/Pieces
PreisPrice
€/100 Stück/Pieces40 1000 3,55
45 1000 5,40
50 1000 5,85
12 500 2,25
13 1000 2,25
15 1000 2,25
16 1000 2,20
17 1000 2,20
20 1000 2,45
25 1000 2,85
30 1000 2,95
35 1000 3,40
40 1000 4,10
45 500 4,60
50 500 5,10
55 500 8,50
60 500 8,50
70 200 13,60
15 1000 3,10
16 1000 3,10
17 1000 3,40
20 1000 3,40
25 1000 3,80
30 1000 4,10
35 500 4,45
40 500 4,95
45 500 6,35
50 500 6,55
55 500 8,00
60 500 8,35
70 200 13,60
16 1000 4,60
17 1000 4,60
20 1000 4,60
25 1000 4,65
30 500 5,15
35 500 5,85
40 500 6,35
45 500 7,15
50 500 7,50
55 500 8,50
4,0
3,5
Abmessungen · Dimensions
4,5
5,0
Universalschraube · Multipurpose Screw
WGR 1122 · Senkkopf-Z, Vollgewinde · Countersunk-Z, Full thread
Universalschraube · Multipurpose Screw
WGR 1122 · Senkkopf-Z, Vollgewinde, gleitbeschichtet · Countersunk-Z, Full thread, waxed
001
galvanisch verzinkt
zinc plated
021
galvanisch verzinkt
gelb chromatiert
zinc plated
yellow chromated
8
www.jdplus.de
Universalschraube · Multipurpose Screw
WGR 1122 · Senkkopf-Z, Vollgewinde, gleitbeschichtet · Countersunk-Z, Full thread, waxed
Abmessungen · Dimensions
Gewinde-ØThread-Ø
d/mm
LängeLength
l/mm
InhaltContent
Stück/Pieces
PreisPrice
€/100 Stück/Pieces60 500 9,10
70 200 13,00
80 200 15,45
90 200 19,80
30 500 9,75
35 500 9,75
40 500 9,75
45 500 10,40
50 200 11,05
55 200 11,95
60 200 13,00
70 200 16,10
80 200 17,95
90 200 20,40
6,0
5,0
001
galvanisch verzinkt
zinc plated
021
galvanisch verzinkt
gelb chromatiert
zinc plated
yellow chromated
Uni
vers
alsc
hrau
ben
M
ultip
urp
ose
Scr
ews
9
Universalschraube · Multipurpose Screw
WGR 1122 · Senkkopf-Z, Vollgewinde, gleitbeschichtet · Countersunk-Z, Full thread, waxed
www.jdplus.de
Universalschraube · Multipurpose Screw
WGR 1123 · Senkkopf-Z, Teilgewinde, gleitbeschichtet · Countersunk-Z, Partial thread, waxed
Gewinde-ØThread-Ø
d/mm
Kopf-ØHead-Ø
dk
Kopfhöhe Height of head
k
KreuzschlitzCross recess
m
3,0 6 1,8 1 3
3,5 7 2,1 2 4
4,0 8 2,4 2 4,2
4,5 9 2,7 2 4,4
5,0 10 2,9 2 5
6,0 12 3,4 3 6,3
Abmessungen · Dimensions
Gewinde-ØThread-Ø
d/mm
LängeLength
l/mm
InhaltContent
Stück/Pieces
PreisPrice
€/100 Stück/Pieces30 1000 2,50
35 1000 2,85
40 1000 3,85
45 1000 4,50
25 1000 2,30
30 1000 2,50
35 1000 3,10
40 1000 3,55
45 1000 5,40
50 500 5,85
25 1000 2,85
30 1000 2,95
35 1000 3,40
40 1000 4,10
45 500 4,60
50 500 5,10
55 500 8,50
60 500 8,50
70 200 13,60
30 1000 4,10
35 500 4,45
40 500 4,95
45 500 6,35
50 500 6,55
55 500 8,00
60 500 8,35
70 200 13,60
80 200 15,45
4,0
3,0
3,5
4,5
001
galvanisch verzinkt
zinc plated
021
galvanisch verzinkt
gelb chromatiert
zinc plated
yellow chromated
Gewinde mit patentiertem SternschliffPatented star cut thread
10
www.jdplus.de
Universalschraube · Multipurpose Screw
WGR 1123 · Senkkopf-Z, Teilgewinde, gleitbeschichtet · Countersunk-Z, Partial thread, waxed
Gewinde-ØThread-Ø
d/mm
LängeLength
l/mm
InhaltContent
Stück/Pieces
PreisPrice
€/100 Stück/Pieces30 500 5,15
35 500 5,85
40 500 6,35
45 500 7,15
50 500 7,55
55 500 8,50
60 500 9,10
65 200 13,00
70 200 13,00
75 200 15,45
80 200 15,45
90 200 19,80
100 200 22,25
120 200 42,50
40 500 9,80
50 200 11,05
60 200 13,00
70 200 16,10
80 200 17,95
90 200 20,40
100 100 23,50
110 100 31,50
120 100 35,50
130 100 39,50
140 100 46,00
150 100 52,00
160 100 62,00
180 100 85,00
200 100 103,00
220 100 161,00
240 100 168,00
5,0
6,0
Abmessungen · Dimensions
001
galvanisch verzinkt
zinc plated
021
galvanisch verzinkt
gelb chromatiert
zinc plated
yellow chromated
Uni
vers
alsc
hrau
ben
M
ultip
urp
ose
Scr
ews
11
Universalschraube · Multipurpose Screw
WGR 1123 · Senkkopf-Z, Teilgewinde, gleitbeschichtet · Countersunk-Z, Partial thread, waxed
www.jdplus.de
Universalschraube · Multipurpose Screw
WGR 1124 · Senkkopf mit I-Stern, Teilgewinde mit Fräsrippen unter dem Kopf, gleitbeschichtet · Countersunk with I-Star recess, Partial thread with self-countersinking ribs under the head, waxed
Gewinde-ØThread-Ø
d/mm
LängeLength
l/mm
InhaltContent
Stück/Pieces
PreisPrice
€/100 Stück/Pieces30 1000 2,45
35 1000 2,85
40 1000 3,85
45 1000 4,50
30 1000 2,50
35 1000 3,10
40 1000 3,55
45 1000 5,40
50 500 5,85
30 1000 2,95
35 1000 3,40
40 1000 4,10
45 500 4,60
50 500 5,10
55 500 8,50
60 500 8,50
70 200 13,60
30 1000 4,10
35 500 4,45
40 500 4,95
45 500 6,35
50 500 6,55
60 500 8,35
70 200 13,60
80 200 15,45
3,0
3,5
4,0
Abmessungen · Dimensions
Gewinde-ØThread-Ø
d/mm
Kopf-ØHead-Ø
dk
KopfhöheHeight of head
k
I-SternI-Star
3,0 6 1,8 l-10
3,5 7 2,1 l-15
4,0 8 2,4 l-20
4,5 9 2,7 l-20
5,0 10 2,9 l-25
6,0 12 3,4 l-30
4,5
001
galvanisch verzinkt
zinc plated
021
galvanisch verzinkt
gelb chromatiert
zinc plated
yellow chromated
Gewinde mit patentiertem SternschliffPatented star cut thread
12
www.jdplus.de
Universalschraube · Multipurpose Screw
WGR 1124 · Senkkopf mit I-Stern, Teilgewinde mit Fräsrippen unter dem Kopf, gleitbeschichtet · Countersunk with I-Star recess, Partial thread with self-countersinking ribs under the head, waxed
Abmessungen · Dimensions
Gewinde-ØThread-Ø
d/mm
LängeLength
l/mm
InhaltContent
Stück/Pieces
PreisPrice
€/100 Stück/Pieces30 500 5,15
35 500 5,85
40 500 6,35
45 500 7,15
50 500 7,55
55 500 8,50
60 500 9,10
70 200 13,00
80 200 15,45
90 200 19,80
100 200 22,25
120 200 42,50
40 500 9,75
45 500 10,40
50 200 11,05
60 200 13,00
70 200 16,10
80 200 17,95
90 200 20,40
100 100 23,50
110 100 31,50
120 100 35,50
130 100 39,50
140 100 45,50
150 100 52,00
160 100 62,00
180 100 84,00
200 100 102,00
220 100 161,00
240 100 168,00
6,0
5,0
001
galvanisch verzinkt
zinc plated
021
galvanisch verzinkt
gelb chromatiert
zinc plated
yellow chromated
Uni
vers
alsc
hrau
ben
M
ultip
urp
ose
Scr
ews
13
www.jdplus.de
Universalschraube · Multipurpose Screw
WGR 1124 · Kleinpakete · Senkkopf mit I-Stern, Teilgewinde mit Fräsrippen unter dem Kopf, gleitbeschichtet · Craft packs · Countersunk with I-Star recess, Partial thread with self-countersinking ribs under the head, waxed
Abmessungen · Dimensions
Gewinde-ØThread-Ø
d/mm
LängeLength
l/mm
InhaltContent
Stück/Pieces
PreisPrice
€/100 Stück/Pieces30 200 2,85
35 200 3,50
40 200 4,25
45 200 6,40
30 200 2,85
35 200 3,45
40 200 4,00
45 200 6,10
50 200 6,60
30 200 3,30
35 200 3,90
40 200 4,60
45 200 5,20
50 200 5,60
60 100 9,55
70 100 15,45
30 200 4,50
35 200 5,10
40 200 5,45
45 200 7,10
50 200 7,30
60 100 9,30
70 100 15,45
30 200 5,70
35 200 6,60
40 200 7,15
45 200 8,05
50 200 8,45
60 100 10,25
70 100 14,30
80 100 16,70
90 100 22,25
100 100 24,75
120 100 46,75
3,0
3,5
4,0
4,5
5,0
021
galvanisch verzinkt
gelb chromatiert
zinc plated
yellow chromated
Abmessungen · Dimensions
Gewinde-ØThread-Ø
d/mm
Kopf-ØHead-Ø
dk
Kopfhöhe Height of Head
k
I-SternI-Star
3,0 6 1,8 I-10
3,5 7 2,1 I-15
4,0 8 2,4 I-20
4,5 9 2,7 I-20
5,0 10 2,9 I-25
Gewinde-ØThread-Ø
d/mm
LängeLength
l/mm
InhaltContent
Stück/Pieces
PreisPrice
€/100 Stück/Pieces12 1000 1,45
16 1000 1,65
20 1000 1,75
25 1000 1,85
16 1000 1,85
20 1000 2,10
25 1000 2,30
16 1000 2,20
20 1000 2,45
25 1000 2,85
20 1000 3,40
25 1000 3,80
20 1000 4,60
25 1000 4,65
3,0
3,5
4,0
4,5
5,0
001
galvanisch verzinkt
zinc plated
021
galvanisch verzinkt
gelb chromatiert
zinc plated
yellow chromated
14
www.jdplus.de
Universalschraube · Multipurpose Screw
WGR 1125 · Senkkopf mit I-Stern, Vollgewinde mit Fräsrippen unter dem Kopf, gleitbeschichtet · Countersunk with I-Star recess, Full thread with self-countersinking ribs under the head, waxed
Gewinde mit patentiertem SternschliffPatented star cut thread
Uni
vers
alsc
hrau
ben
M
ultip
urp
ose
Scr
ews
15
www.jdplus.de
Universalschraube · Multipurpose Screw
WGR 1125 · Kleinpakete · Senkkopf mit I-Stern, Vollgewinde mit Fräsrippen unter dem Kopf, gleitbeschichtet · Craft packs · Countersunk with I-Star recess, Full thread with self-countersinking ribs under the head, waxed
Gewinde-ØThread-Ø
d/mm
LängeLength
l/mm
InhaltContent
Stück/Pieces
PreisPrice
€/100 Stück/Pieces12 200 1,70
16 200 1,80
20 200 1,90
25 200 2,05
12 200 2,10
16 200 2,05
20 200 2,35
25 200 2,55
16 200 2,50
20 200 2,65
25 200 3,10
16 200 3,45
20 200 3,85
25 200 4,25
20 200 5,15
25 200 5,25
3,0
3,5
4,0
4,5
5,0
Abmessungen · Dimensions
021
galvanisch verzinkt
gelb chromatiert
zinc plated
yellow chromated
16
Gewinde-ØThread-Ø
d/mm
LängeLength
l/mm
InhaltContent
Stück/Pieces
PreisPrice
€/100 Stück/Pieces12 5000 1,80
16 5000 1,90
17 5000 1,90
20 3000 2,05
25 3000 2,25
12 3000 2,25
13 3000 2,25
15 3000 2,25
16 3000 2,25
17 2500 2,25
20 2500 2,55
25 2000 2,75
30 2000 3,00
12 3000 2,85
13 3000 2,85
15 2500 2,70
16 2500 2,70
17 2000 2,70
20 2000 2,95
25 2000 3,40
30 2000 3,55
35 1000 4,10
40 1000 4,95
3,0
3,5
4,0
Abmessungen · DimensionsAbmessungen · Dimensions
www.jdplus.de
Gewinde-ØThread-Ø
d/mm
Kopf-ØHead-Ø
dk
Kopfhöhe Height of head
k
KreuzschlitzCross recess
m
3,0 6 2,4 1 3
3,5 7 2,5 2 4
4,0 8 2,9 2 4,2
4,5 9 3,2 2 4,4
5,0 10 3,5 2 5
6,0 12 4,1 3 6,3
001
galvanisch verzinkt
zinc plated
Universalschraube · Multipurpose Screw
WGR 1126 · Pan-Head-Z, gleitbeschichtet · Pan-Head-Z, waxed
Gewinde mit patentiertem SternschliffPatented star cut thread
Uni
vers
alsc
hrau
ben
M
ultip
urp
ose
Scr
ews
17
www.jdplus.de
Gewinde-ØThread-Ø
d/mm
LängeLength
l/mm
InhaltContent
Stück/Pieces
PreisPrice
€/100 Stück/Pieces15 2000 3,80
16 2000 3,80
17 2000 3,80
20 1000 4,10
25 1000 4,45
30 1000 4,95
35 500 5,35
40 500 6,00
45 500 7,60
50 500 7,90
15 1000 5,45
16 1000 5,45
17 1000 5,45
20 1000 5,45
25 100 5,60
30 500 6,10
35 500 7,05
40 500 7,60
45 200 8,55
50 200 9,05
60 200 11,05
70 200 15,45
80 200 19,80
50 200 13,00
4,5
5,0
6,0
Universalschraube · Multipurpose Screw
WGR 1126 · Pan-Head-Z, gleitbeschichtet · Pan-Head-Z, waxed
Abmessungen · Dimensions
001
galvanisch verzinkt
zinc plated
18
www.jdplus.de
Universalschraube · Multipurpose Screw
WGR 1126 · Kleinpakete · Pan-Head-Z, gleitbeschichtet · Craft packs · Pan-Head-Z, waxed
Gewinde-ØThread-Ø
d/mm
LängeLength
l/mm
InhaltContent
Stück/Pieces
PreisPrice
€/100 Stück/Pieces20 200 2,90
25 200 3,05
30 200 3,40
35 200 4,20
40 200 4,90
20 200 3,35
25 200 3,80
30 200 4,00
35 200 4,60
40 200 5,55
45 200 6,15
50 200 6,70
20 200 4,60
25 200 5,10
30 200 5,45
35 200 6,05
40 200 6,60
45 200 8,50
50 200 8,75
60 100 11,60
20 200 6,15
25 200 6,20
30 200 6,85
35 200 7,95
40 200 8,55
50 200 10,15
60 100 12,25
80 100 20,40
3,5
4,0
5,0
Abmessungen · Dimensions
4,5
001
galvanisch verzinkt
zinc plated
Uni
vers
alsc
hrau
ben
M
ultip
urp
ose
Scr
ews
19
Gewinde-ØThread-Ø
d/mm
Kopf-ØHead-Ø
dk
Kopfhöhe Height of head
k
I-SternI-Star
3,0 6 2,4 I-10
3,5 7 2,5 I-15
4,0 8 2,9 I-20
4,5 9 3,2 I-20
5,0 10 3,5 I-25
Universalschraube · Multipurpose Screw
WGR 1127 · Pan-Head mit I-Stern, gleitbeschichtet · Pan-Head with I-Stern, waxed
Abmessungen · Dimensions
Gewinde-ØThread-Ø
d/mm
LängeLength
l/mm
InhaltContent
Stück/Pieces
PreisPrice
€/100 Stück/Pieces16 500 1,90
25 500 2,25
30 500 2,95
40 500 4,75
16 500 2,25
20 500 2,55
25 500 2,75
30 500 3,00
35 500 3,80
40 500 4,25
45 500 6,50
50 500 7,00
12 500 2,85
16 500 2,70
20 500 2,95
25 500 3,40
30 500 3,55
35 500 4,10
40 500 4,95
45 500 5,55
50 500 6,05
60 300 10,25
70 300 16,30
3,0
3,5
4,0
www.jdplus.de
001
galvanisch verzinkt
zinc plated
Gewinde mit patentiertem SternschliffPatented star cut thread
20
www.jdplus.de
Universalschraube · Multipurpose Screw
WGR 1127 · Pan-Head mit I-Stern, gleitbeschichtet · Pan-Head with I-Stern, waxed
Gewinde-ØThread-Ø
d/mm
LängeLength
l/mm
InhaltContent
Stück/Pieces
PreisPrice
€/100 Stück/Pieces20 500 4,10
25 500 4,45
30 500 4,95
35 500 5,35
40 500 6,00
45 500 7,60
50 500 7,90
60 500 9,95
70 300 16,60
20 500 5,45
25 500 5,60
30 500 6,10
40 500 7,60
50 500 9,05
60 500 11,05
70 300 15,45
80 300 18,55
4,5
5,0
Abmessungen · Dimensions
001
galvanisch verzinkt
zinc plated
Uni
vers
alsc
hrau
ben
M
ultip
urp
ose
Scr
ews
21
www.jdplus.de
Besser. Schneller. Leichter.Better. Stronger. Faster.
Universalschrauben · Multipurpose Screws
Display · Senkkopf mit I-Stern, gelb verzinkt, gleitbeschichtet · Countersunk with I-Star recess, zinc plated yellow chromated, waxed
Die Universalschrauben eignen sich für einen universellen Einsatz, beispielsweise für Hartholz, Spanplatten, Kunststoffe und andere Materialien.
Unter dem Schraubenkopf befindet sich ein Doppelwinkel, der für eine sichere Verarbeitung, einen hervorragenden Klingensitz sowie einen optimalenKraftschluss sorgt. Fräsrippen beim I-Stern ermöglichen eine perfekte Versenkung und einen sauberen Abschluss mit der Oberfläche.
Die Spitze sowie das einzigartige Gewinde inklusive der optimalen Gleitbeschichtung ermöglichen schnellere Einschraubmomente und höhere Haltekräfte.
The Multipurpose screw is suitable for most applications, hard wood, soft wood, PVC and many other materials.
The angle of the head has been designed with a double countersink to allow for extra deep bit engagement to provide safe und secure driving of the screw.The self countersinking ribs of the I-Star version forms a perfect countersink with a tidy burr free finish.
The patented thread design along with unique lubricant provides faster screw insertion times, coupled with a superior pull out resistance than standard screws.
Abmessungen · Dimensions
AbmessungDimension
mm
InhaltContent
Stück/Pieces
BestellmengeOrder size
Pakete/Packs1. 3,5 x 30 200 60
2. 4,0 x 40 200 60
3. 4,0 x 50 200 30
4. 5,0 x 60 100 20
5. 5,0 x 80 100 20
Bestückungsbeispiel · Placement sample
Zur Warenpräsentation stehen Ihnenunsere verkaufsfördernden, stabilen Displays zur Verfügung.For presentation purposesour promotional and solid displaysare at your disposal.
Uni
vers
alsc
hrau
ben
M
ultip
urp
ose
Scr
ews
23
www.jdplus.de
Universalschraube · Multipurpose Screw
WGR 3788 · Senkkopf mit I-Stern, Teilgewinde mit Fräsrippen unter dem Kopf, rostfrei, A2 · Countersunk with I-Star, Partial thread with self-countersinking ribs under the head, stainless steel, A2
Gewinde-ØThread-Ø
d/mm
Kopf-ØHead-Ø
dk
Kopfhöhe Height of head
k
I-SternI-Star
3,0 6 1,8 I-10
3,5 7 2,1 I-15
4,0 8 2,4 I-20
4,5 9 2,7 I-20
5,0 10 2,9 I-25
6,0 12 3,4 I-30
Abmessungen · Dimensions
Gewinde-ØThread-Ø
d/mm
LängeLength
l/mm
InhaltContent
Stück/Pieces
PreisPrice
€/100 Stück/Pieces30 200 6,50
30 200 7,65
35 200 8,50
40 200 8,90
30 200 8,00
35 200 8,90
40 200 9,80
45 200 10,80
50 200 11,90
60 100 14,00
70 100 16,10
30 200 9,90
35 200 11,20
40 200 12,80
45 200 14,50
50 200 16,10
60 200 18,70
70 200 21,50
30 200 12,80
35 200 14,50
40 100 16,00
45 100 17,70
50 100 20,50
3,03,5
4,0
4,5
5,0
Gewinde mit patentiertem SternschliffPatented star cut thread
24
www.jdplus.de
Universalschraube · Multipurpose Screw
WGR 3788 · Senkkopf mit I-Stern, Teilgewinde mit Fräsrippen unter dem Kopf, rostfrei, A2 · Countersunk with I-Star, Partial thread with self-countersinking ribs under the head, stainless steel, A2
Gewinde-ØThread-Ø
d/mm
LängeLength
l/mm
InhaltContent
Stück/Pieces
PreisPrice
€/100 Stück/Pieces60 100 23,70
70 100 27,00
80 100 37,40
90 100 42,50
100 100 46,30
50 100 33,00
60 100 37,00
70 100 42,50
80 100 44,50
90 100 48,00
100 100 52,00
120 100 62,00
Abmessungen · Dimensions
6,0
5,0
Uni
vers
alsc
hrau
ben
M
ultip
urp
ose
Scr
ews
25
www.jdplus.de
Universalschraube · Multipurpose Screw
WGR 3789 · Senkkopf mit I-Stern, Vollgewinde mit Fräsrippen unter dem Kopf, rostfrei, A2 · Countersunk with I-Star, Full thread with self-countersinking ribs under the head, stainless steel, A2
Gewinde-ØThread-Ø
d/mm
Kopf-ØHead-Ø
dk
KopfhöheHeight of head
k
I-SternI-Star
3,0 6 1,8 I-10
3,5 7 2,1 I-15
4,0 8 2,4 I-20
4,5 9 2,7 I-20
5,0 10 2,9 I-25
Gewinde-ØThread-Ø
d/mm
LängeLength
l/mm
InhaltContent
Stück/Pieces
PreisPrice
€/100 Stück/Pieces16 200 4,20
20 200 4,90
25 200 5,60
16 200 4,65
20 200 5,60
25 200 6,60
16 200 5,90
20 200 6,10
25 200 7,00
20 200 9,00
25 200 9,50
25 200 12,50
30 200 12,80
35 200 14,50
3,0
3,5
4,0
4,5
Abmessungen · Dimensions
5,0
Gewinde mit patentiertem SternschliffPatented star cut thread
DielenschraubenFloorboard Screws
27
www.jdplus.de
Die Spitze / The thread cutting tip Schnelles Greifen im Holz, kein Spleißen. Speedy insertion, no splitting.
3
Gewinde / Thread Der bewährte patentierte Sternschliff erlaubt ein einfaches Einschrauben mit minimalem Zeit- undKraftaufwand. The well-proven patented star cut allows simple,fast and effortless screwing-in.
2
I-Stern und Fräsrippen / I-Star and self-countersinking ribs Optimale Kraftübertragung, sauberes Versenken. Optimal torque transmission and perfect self-countersinking.
1
Die kompetente Schraube zur Verarbeitung von Massivholz-Dielen. The professional screw to be used for solid wood planks.
Gewinde-ØThread-Ø
d/mm
LängeLength
l/mm
InhaltContent
Stück/Pieces
PreisPrice
€/100 Stück/Pieces45 500 7,50
50 500 8,50
55 500 8,95
60 500 9,60
70 200 11,90
80 200 13,60
Gewinde-ØThread-Ø
d/mm
Kopf-ØHead-Ø
dk
Kopfhöhe Height of head
k
SchaftlängeLength of shaft
b
I-SternI-Star
3,5 6 3,5 16 I-15
4,0 6,3 3,5 30 I-15
Abmessungen · Dimensions
28
www.jdplus.de
Dielenschraube · Floorboard Screw
WGR 1168 · Senkkopf mit I-Stern und Fräsrippen, gleitbeschichtet · Countersunk with I-Star recess and self-countersinking ribs, waxed
3,5
4,0
021
galvanisch verzinkt
gelb chromatiert
zinc plated
yellow chromated
Gewinde mit patentiertem SternschliffPatented star cut thread
31
KonstruktionsschraubenTimber Construction
Screws
www.jdplus.de
Erhältlich mit Senkkopf und Tellerkopf in 8, 10 und 12 mm Durchmesser. Durch I-Stern Kraftantrieb schnelle und sichere Verschraubung. Kein Vorbohren mehr notwendig. Bauaufsichtlich zugelassen.
Available in countersunk or flange head in 8, 10 and 12 mm diameter. The I-Star recess gives the a positive stick fit recess avoiding camout problems. No pre-drilling required due to the razor sharp tip with cutting notch. Approved by the German Building Authorities.
Jetzt auch für den Holzbau.Ideal for fastening joists, rafters and other timber construction.
Senkkopf mit I-Stern,Fräsrippen und Längenprägung.Countersunk, I-Star recess,self-countersinking ribs.
1
Scharfe Spitze mit Schneidkante.Razor sharp tip with cutting notch.
2
Tellerkopf mit I-Stern.Flange head, I-Star recess.
3
Schaftfräser.Milling segment.
4
32
Abmessungen · Dimensions
Gewinde-ØThread-Ø
d/mm
Kopf-ØHead-Ø
dk
Gewindelänge Length of thread
b
SchaftfräserMilling segment
LR
I-SternI-Star
8 15,0 80,0 12,0 l-40
10 18,4 80,0 12,0 l-50
Gewinde-ØThread-Ø
d/mm
LängeLength
l/mm
InhaltContent
Stück/Pieces
PreisPrice
€/100 Stück/Pieces80 50 16,35
100 50 19,70
120 50 24,50
140 50 28,80
160 50 37,45
180 50 47,00
200 50 53,25
220 50 65,25
240 50 78,40
260 50 89,00
280 50 98,40
300 50 105,60
320 50 115,00
340 50 125,00
360 50 137,00
380 50 153,50
400 50 168,00
450 50 197,00
8,0
Konstruktionsschraube · Timber Construction Screw
WGR 1141 · Für den Holzbau, Senkkopf mit I-Stern, Teilgewinde, Fräsrippen und Längenprägung, gleitbeschichtet. Mit bauaufsichtlicher Zulassung. · Countersunk with I-Star recess, Partial thread with self-countersinking ribs and razor sharp tip with cutting notch, waxed. Approved by the German Building Authorities.
www.jdplus.de
Gewinde mit SchneidkanteThread with cutting notch
021
galvanisch verzinkt
gelb chromatiert
zinc plated
yellow chromated
Gewinde-ØThread-Ø
d/mm
LängeLength
l/mm
InhaltContent
Stück/Pieces
PreisPrice
€/100 Stück/Pieces80 50 22,00
100 50 26,40
120 50 33,00
140 50 41,00
160 50 51,00
180 50 64,00
200 50 77,00
220 50 92,00
240 50 108,00
260 50 120,00
280 50 135,00
300 50 150,00
320 50 165,00
340 50 178,00
360 50 193,00
380 50 218,00
400 50 236,00
450 50 270,00
Ko
nstr
ukti
ons
schr
aub
en
Tim
ber
Con
stru
ctio
n S
crew
s
33
www.jdplus.de
Konstruktionsschraube · Timber Construction Screw
WGR 1141 · Für den Holzbau, Senkkopf mit I-Stern, Teilgewinde, Fräsrippen und Längenprägung, gleitbeschichtet. Mit bauaufsichtlicher Zulassung. · Countersunk with I-Star recess, Partial thread with self-countersinking ribs and razor sharp tip with cutting notch, waxed. Approved by the German Building Authorities.
10,0
Abmessungen · Dimensions
021
galvanisch verzinkt
gelb chromatiert
zinc plated
yellow chromated
Gewinde-ØThread-Ø
d/mm
LängeLength
l/mm
InhaltContent
Stück/Pieces
PreisPrice
€/100 Stück/Pieces80 50 18,00
100 50 21,70
120 50 27,00
140 50 31,70
160 50 41,20
180 50 51,70
200 50 58,60
220 50 71,80
240 50 86,20
260 50 97,90
280 50 108,20
300 50 116,20
320 50 126,50
340 50 137,50
360 50 150,70
380 50 168,90
400 50 185,00
450 50 217,00
8,0
Ø 12 mm auf Anfrage auch lieferbar. On request available in diameter 12 mm too.
Ø 10 und 12 mm auf Anfrage auch lieferbar. On request available in diameter 10 and 12 mm too.
198
mit optimierter
Oberfläche
with optimized
surface
NEUNEW
34
www.jdplus.de
Gewinde-ØThread-Ø
d/mm
Kopf-ØHead-Ø
dk
Gewindelänge Length of thread
b
SchaftfräserMilling segment
LR
I-SternI-Star
8 22 80,0 12,0 l-40
10 25 80,0 12,0 l-50
Abmessungen · Dimensions
Gewinde-ØThread-Ø
d/mm
LängeLength
l/mm
InhaltContent
Stück/Pieces
PreisPrice
€/100 Stück/Pieces80 50 19,00
100 50 22,00
120 50 28,00
140 50 33,00
160 50 41,00
180 50 53,00
200 50 59,00
220 50 73,00
240 50 89,00
260 50 102,00
280 50 112,00
300 50 123,00
320 50 136,00
340 50 148,00
360 50 158,00
380 50 180,00
400 50 195,00
450 25 220,00
8,0021
galvanisch verzinkt
gelb chromatiert
zinc plated
yellow chromated
Gewinde mit SchneidkanteThread with cutting notch
Konstruktionsschraube · Timber Construction Screw
WGR 1148 · Für den Holzbau, Tellerkopf mit I-Stern, Teilgewinde, Fräsrippen und Längenprägung, gleitbeschichtet. Mit bauaufsichtlicher Zulassung. · Flange head with I-Star recess, Partial thread with self-countersinking ribs and razor sharp tip with cutting notch, waxed. Approved by the German Building Authorities.
Ko
nstr
ukti
ons
schr
aub
en
Tim
ber
Con
stru
ctio
n S
crew
s
35
www.jdplus.de
Konstruktionsschraube · Timber Construction Screw
WGR 1148 · Für den Holzbau, Tellerkopf mit I-Stern, Teilgewinde, Fräsrippen und Längenprägung, gleitbeschichtet. Mit bauaufsichtlicher Zulassung. · Flange head with I-Star recess, Partial thread with self-countersinking ribs and razor sharp tip with cutting notch, waxed. Approved by the German Building Authorities.
Gewinde-ØThread-Ø
d/mm
LängeLength
l/mm
InhaltContent
Stück/Pieces
PreisPrice
€/100 Stück/Pieces80 50 26,00
100 50 29,00
120 50 37,00
140 50 46,00
160 25 58,00
180 25 72,00
200 25 88,00
220 25 102,00
240 25 122,00
260 25 136,00
280 25 150,00
300 25 165,00
320 25 187,00
340 25 201,00
360 25 217,00
380 25 245,00
400 25 267,00
450 25 299,00
10,0
Abmessungen · Dimensions
021
galvanisch verzinkt
gelb chromatiert
zinc plated
yellow chromated
Gewinde-ØThread-Ø
d/mm
LängeLength
l/mm
InhaltContent
Stück/Pieces
PreisPrice
€/100 Stück/Pieces80 50 21,00
100 50 24,00
120 50 31,00
140 50 36,50
160 50 45,00
180 50 58,30
200 50 65,00
220 50 80,50
240 50 98,00
260 50 112,00
280 50 123,00
300 50 135,00
320 50 150,00
340 50 163,00
360 50 174,00
380 50 198,00
400 50 215,00
450 25 242,00
8,0
Ø 12 mm auf Anfrage auch lieferbar. On request available in diameter 12 mm too.
Ø 10 und 12 mm auf Anfrage auch lieferbar. On request available in diameter 10 and 12 mm too.
198
mit optimierter
Oberfläche
with optimized
surface
NEUNEW
TerrassenschraubenDecking Screws
37
www.jdplus.de
Die Spitze / The thread cutting tip Schnelles Greifen im Holz, kein Spleißen. Speedy insertion, no splitting.
3
Fixiergewinde / Locking thread Sicheres und enges Verbinden zweier Hölzer. Secure fastening of both the deck and the frame.
2
I-Stern und Fräsrippen / I-Star and self-countersinking ribs Optimale Kraftübertragung, sauberes Versenken. Optimal torque transmission and perfect self-countersinking.
1
Die neue Terrassenschraube bietet universelle Einsatzmöglichkeiten bei der täglichen Arbeit im Außenbereich. Eine saubere, rostfreie und professionelle Verarbeitung in Harthölzern wird unter anderem durch das Fixiergewinde erreicht, welches für eine sichere und enge Verbindung zwischen zwei Hölzern sorgt.
Der I-Stern sorgt für eine optimale Kraftübertragung, während die Spitze ein schnelles Greifen der Schraube im Holz garantiert. Durch den Einsatz dieses neuen, innovativen Produktes wird ein Spleißen des Holzes fast ausgeschlossen. Das Vorbohren wird jedoch empfohlen.
For use in all decking applications. Made from A2 stainless steel makes the new ideal for all exterior environments and will not react with tanalised timber. The reverse locking thread underneath the head ensures both the deck and timber frame are securely fixed.
The I-Star provides optimal torque transmission whilst the thread cutting razor sharp point ensures speedy insertion. The thread cutting prevents the wood from splitting. However predrilling is requested.
Die ultimative Schraube zur Verarbeitung in Harthölzern. The ultimate timber decking screw.
38
www.jdplus.de
Terrassenschraube · Decking Screw
WGR 3699 · Senkkopf mit I-Stern und Fräsrippen, rostfrei, A2 · Countersunk with I-Star recess and self-countersinking ribs, stainless steel, A2
WGR 3034 · Senkkopf mit I-Stern und Fräsrippen, rostfrei, A4 · Countersunk with I-Star recess and self-countersinking ribs, stainless steel, A4
NennmaßBasic size
Gewinde-ØThread-Ø
d/mm
Kopf-ØHead-Ø
dk
Gewindelänge Length of thread
b
I-SternI-Star
GesamtlängeLength
L
SchaftlängeLength of shaft
LS
40 5,0 8,0 15,0 I-25 43,0 20,5
50 5,0 8,0 15,0 I-25 53,0 30,5
60 5,0 8,0 15,0 I-25 63,0 35,5
70 5,0 8,0 15,0 I-25 73,0 40,5
80 5,0 8,0 15,0 I-25 83,0 45,5
Abmessungen · Dimensions
Gewinde-ØThread-Ø
d/mm
LängeLength
l/mm
InhaltContent
Stück/Pieces
Preis A2Price A2
€/100 Stück/Pieces
Preis A4Price A4
€/100 Stück/Pieces40 200 24,00 36,00
50 200 29,00 44,00
60 100 33,00 52,00
70 100 49,00 73,00
80 100 53,00 82,00
5,0
Gewinde mit SchneidkanteThread with cutting notch
Ter
rass
ensc
hrau
ben
D
ecki
ng S
crew
s
39
www.jdplus.de
Besser. Schneller. Leichter.Better. Stronger. Faster.
Terrassenschrauben · Decking Screws
Display · Senkkopf mit I-Stern, rostfrei, A2 · Countersunk with I-Star recess, stainless steel, A2
Die neue Terrassenschraube bietet universelle Einsatzmöglichkeiten bei der täglichen Arbeit im Außenbereich. Eine saubere, rostfreie und professionelleVerarbeitung in Harthölzern wird unter anderem durch das Fixiergewinde erreicht, welches für eine sichere und enge Verbindung zwischen zwei Hölzern sorgt.
Der I-Stern Antrieb sorgt für eine optimale Kraftübertragung, während die Spitze ein schnelles Greifen der Schraube im Holz garantiert.Durch den Einsatz dieses neuen, innovatioven Produktes wird ein Spleißen des Holzes fast ausgeschlossen. Das Vorbohren wird jedoch empfohlen.
For use in all decking applications. Made from A2 stainless steel makes the ideal for all exterior environments and will not react with tanalised timber.The reverse locking thread underneath the head ensures both the deck and timber frame are securely fixed.
The I-Star provides optimal torque transmission whilst the thread cutting razor sharp point ensures speedy insertion.The thread cutting prevents the wood from splitting. However predrilling is requested.
AbmessungDimension
mm
InhaltContent
Stück/Pieces
BestellmengeOrder size
Pakete/Packs1. 5 x 40 200 12
2. 5 x 50 200 32
3. 5 x 60 100 40
4. 5 x 70 100 12
5. 5 x 80 100 8
Abmessungen · Dimensions
Bestückungsbeispiel · Placement sample
Zur Warenpräsentation stehen Ihnenunsere verkaufsfördernden, stabilen Displays zur Verfügung.For presentation purposesour promotional and solid displaysare at your disposal.
www.jdplus.de
41
Erhältlich mit I-Stern.Durch I-Stern Kraftantrieb schnelle und sichere Verschraubung.
Available with I-Star. The I-Star recess gives the a positive stick fit recess avoiding camout problems.
Schraube für Kunststoff-Profile und Holzprofile.Ideal for plastic profiles and wood profiles.
Scharfe Spitze, patentierte Gewindeausprägung.Razor sharp tip, patented thread.
2
Kleiner Kopf mit I-Sternfür Holzprofile.Small head with I-Starfor wood profiles.
3
Doppelganggewinde für sichere und schnelle Verarbeitung.Double thread for safe andquick processing.
4Senkkopf mit I-Stern,für Kunststoffprofile.Countersunk with I-Star for plastic profiles.
1
FensterrahmenschraubenWindow Frame Anchors
42
www.jdplus.de
Gewinde-ØThread-Ø
d/mm
Kopf-ØHead-Ø
dk
KopfhöheHeight of head
k
I-SternI-Star
7,5 11,0 3,5 I-30
Gewinde-ØThread-Ø
d/mm
LängeLength
l/mm
InhaltContent
Stück/Pieces
PreisPrice
€/100 Stück/Pieces52 100 9,00
72 100 12,00
92 100 16,00
112 100 19,50
132 100 26,00
152 100 31,00
182 100 42,50
212 100 55,00
7,5
Fensterrahmenschraube · Window Frame Anchor
WGR 6640 · Senkkopf mit I-Stern für Kunststoff-Profile · Countersunk with I-Star for plastic profiles
001
galvanisch verzinkt
zinc plated
021
galvanisch verzinkt
gelb chromatiert
zinc plated
yellow chromated
Gewinde mit patentiertem SternschliffPatented star cut thread
Abmessungen · Dimensions
Prüfbericht · Test report
Prüfung der Eignung zur Befestigung eines Fensters am Baukörper mit Ziegelmauerwerk durch das ift Rosenheim.
Prüfbericht Nr. 105 42129 vom 15. Februar 2010
Testing of the applicability for mounting a window to a brickwork structure by ift Rosenheim.
Test report no. 105 42129 dated 15th, February 2010
Fens
terr
ahm
ensc
hrau
ben
W
ind
ow F
ram
e A
ncho
rs
43
www.jdplus.de
Fensterrahmenschraube · Window Frame Anchor
WGR 6641 · Kleiner Kopf mit I-Stern für Holzprofile · Small head with I-Star for wood profiles
Gewinde-ØThread-Ø
d/mm
Kopf-ØHead-Ø
dk
KopfhöheHeight of head
k
I-SternI-Star
7,5 8,0 3,0 I-25
Abmessungen · Dimensions
Gewinde-ØThread-Ø
d/mm
LängeLength
l/mm
InhaltContent
Stück/Pieces
PreisPrice
€/100 Stück/Pieces72 100 12,00
92 100 16,00
112 100 19,50
132 100 26,00
152 100 31,00
182 100 42,50
212 100 55,00
7,5
001
galvanisch verzinkt
zinc plated
021
galvanisch verzinkt
gelb chromatiert
zinc plated
yellow chromated
Gewinde mit patentiertem SternschliffPatented star cut thread
Prüfbericht · Test report
Prüfung der Eignung zur Befestigung eines Fensters am Baukörper mit Ziegelmauerwerk durch das ift Rosenheim.
Prüfbericht Nr. 105 42129 vom 15. Februar 2010
Testing of the applicability for mounting a window to a brickwork structure by ift Rosenheim.
Test report no. 105 42129 dated 15th, February 2010
Universalschrauben · Multipurpose ScrewsArt. 8627 · Senkkopf mit I-Stern, gelb verzinkt · Countersunk with I-Star recess, zinc plated yellow chromated
Abmessungen · Dimensions
AbmessungDimension
mm
InhaltContent
Stück/Pieces1. 3 x 16 (inkl. 1 Bit T10) 100
2. 3 x 20 100
3. 3,5 x 20 (inkl. 1 Bit T15) 100
4. 3,5 x 25 80
5. 3,5 x 30 60
6. 3,5 x 40 40
AbmessungDimension
mm
InhaltContent
Stück/Pieces7. 4 x 25 (inkl. 1 Bit T20) 50
8. 4 x 30 50
9. 4 x 35 50
10. 4 x 40 50
11. 4 x 45 50
12. 4 x 50 30
AbmessungDimension
mm
InhaltContent
Stück/Pieces13. 4,5 x 35 30
14. 4,5 x 40 30
15. 4,5 x 50 30
16. 5 x 40 (inkl. 1 Bit T25) 30
17. 5 x 50 30
18. 5 x 60 30
44
Universalschrauben · Multipurpose ScrewsArt. 8638 · Senkkopf mit I-Stern, verzinkt · Countersunk with I-Star recess, zinc plated
Abmessungen · Dimensions
AbmessungDimension
mm
InhaltContent
Stück/Pieces1. 3 x 16 (inkl. 1 Bit T10) 100
2. 3 x 20 100
3. 3,5 x 20 (inkl. 1 Bit T15) 100
4. 3,5 x 25 80
5. 3,5 x 30 60
6. 3,5 x 40 40
AbmessungDimension
mm
InhaltContent
Stück/Pieces7. 4 x 25 (inkl. 1 Bit T20) 50
8. 4 x 30 50
9. 4 x 35 50
10. 4 x 40 50
11. 4 x 45 50
12. 4 x 50 30
AbmessungDimension
mm
InhaltContent
Stück/Pieces13. 4,5 x 35 30
14. 4,5 x 40 30
15. 4,5 x 50 30
16. 5 x 40 (inkl. 1 Bit T25) 30
17. 5 x 50 30
18. 5 x 60 30
105,80 €
105,80 €
Sortimentskästen · Assortment Cases
Universalschrauben · Multipurpose ScrewsArt. 8629 · Halbrundkopf (Pan-Head) mit I-Stern, verzinkt · Pan-Head with I-Star recess, zinc plated
Abmessungen · Dimensions
AbmessungDimension
mm
InhaltContent
Stück/Pieces1. 3,5 x 20 (inkl. 1 Bit T15) 100
2. 3,5 x 30 50
3. 3,5 x 35 50
4. 3,5 x 40 50
5. 4 x 25 (inkl. 1 Bit T20) 50
6. 4 x 30 50
AbmessungDimension
mm
InhaltContent
Stück/Pieces7. 4 x 35 50
8. 4 x 40 50
9. 4 x 45 25
10. 4 x 50 25
11. 4 x 30 25
12. 4,5 x 35 25
AbmessungDimension
mm
InhaltContent
Stück/Pieces13. 4,5 x 40 25
14. 4,5 x 50 25
15. 5 x 30 (inkl. 1 Bit T25) 25
16. 5 x 40 25
17. 5 x 50 25
18. 5 x 60 25
Universalschrauben · Multipurpose ScrewsArt. 8628 · Halbrundkopf (Pan-Head) mit Kreuzschlitz, verzinkt · Pan-Head with cross recess, zinc plated
Abmessungen · Dimensions
AbmessungDimension
mm
InhaltContent
Stück/Pieces1. 3,5 x 20 100
2. 3,5 x 30 50
3. 3,5 x 35 50
4. 3,5 x 40 50
5. 4 x 25 50
6. 4 x 30 50
AbmessungDimension
mm
InhaltContent
Stück/Pieces7. 4 x 35 50
8. 4 x 40 50
9. 4 x 45 25
10. 4 x 50 25
11. 4,5 x 30 25
12. 4,5 x 35 25
AbmessungDimension
mm
InhaltContent
Stück/Pieces13. 4,5 x 40 25
14. 4,5 x 50 25
15. 5 x 30 25
16. 5 x 40 25
17. 5 x 50 25
18. 5 x 60 25
Universalschrauben · Multipurpose ScrewsArt. 8637 · Senkkopf mit I-Stern, Edelstahl rostfrei, A2 · Countersunk with I-Star recess, stainless steel, A2
Abmessungen · Dimensions
AbmessungDimension
mm
InhaltContent
Stück/Pieces1. 3 x 16 (inkl. 1 Bit T10) 60
2. 3 x 20 60
3. 3,5 x 20 (inkl. 1 Bit T15) 60
4. 3,5 x 25 40
5. 3,5 x 30 40
6. 3,5 x 40 40
AbmessungDimension
mm
InhaltContent
Stück/Pieces7. 4 x 25 (inkl. 1 Bit T20) 40
8. 4 x 30 40
9. 4 x 35 40
10. 4 x 40 40
11. 4 x 45 40
12. 4 x 50 30
AbmessungDimension
mm
InhaltContent
Stück/Pieces13. 4,5 x 35 30
14. 4,5 x 40 30
15. 4,5 x 50 30
16. 5 x 40 (inkl. 1 Bit T25) 30
17. 5 x 50 30
18. 5 x 60 20
So
rtim
ents
käst
en
Ass
ortm
ent
Cas
es
45
Sortimentskästen · Assortment Cases
www.jdplus.de
107,90 €
107,90 €
135,00 €
www.jdplus.de
Sortimentskästen · Assortment CasesDisplay · Universalschrauben · Senkkopf mit I-Stern und Fräsrippen unter dem Kopf, gelb verzinkt · Multipurpose Screws · Countersunk with I-Star recess, self-countersinking ribs under the head
Besser. Schneller. Leichter.Better. Stronger. Faster.
46
Perfekte Ordnung durch Sortimente.Perfect order through assortments.
• Zentrale / Headquarters
Joseph DresselhausBefestigungstechnik GmbH & Co. KGZeppelinstraße 13 · D-32051 HerfordPostfach 1464 · D-32004 HerfordTel.: +49 5221 932-0 Fax: +49 5221 932-400E-Mail: [email protected]: www.dresselhaus.de
•Auslandsgesellschaft /Foreign company
•Dresselhaus Çetin •Civata Pazarlama Ticaret Ltd. Şti.•İstiklal Mah.Atatürk Cad.Ekin Sokak No.4•34522 Kıraç/Esenyurt/İstanbul/Türkiye•Tel.: +90 212-6893800•Fax: +90 212-6899160•E-Mail: [email protected]
•Vertriebspartner / Distribution partners
Sünkel Schrauben GmbHOT Weischau 16 · D-96242 SonnefeldTel.: +49 9562 9831-0 Fax: +49 9562 9831-24 E-Mail: [email protected]
Sünkel Śruby Sp. z o.o.ul. Świerczewskiego 50 · PL-66304 BrójceTel.: +48 95 7429830 Fax: +48 95 7429834E-Mail: [email protected]
•Repräsentanz / Representation Joseph DresselhausBefestigungstechnik GmbH & Co. KGRussland/St. PetersburgTel.: +7 812 93511-57 E-Mail: [email protected]
•Niederlassungen / Locations
Joseph DresselhausBefestigungstechnik GmbH & Co. KGAlte Chaussee 64 D-32825 Blomberg-DonopTel.: +49 5236 899-0 Fax: +49 5236 1720E-Mail: [email protected]
Dresselhaus MSHSpitalwaldstraße 19 · D-91126 SchwabachPostfach 1769 · D-91107 SchwabachTel.: +49 9122 9972-0Fax: +49 9122 9972-88E-Mail: [email protected]
Dresselhaus MSHFrauenstraße 37 · D-82216 MaisachPostfach 100 · D-82213 MaisachTel.: +49 8141 956-0Fax: +49 8141 956-222E-Mail: [email protected]
Dresselhaus SSHWasenmühle 8 · D-73660 UrbachPostfach 1109 · D-73656 UrbachTel.: +49 7181 805-0 Fax: +49 7181 805-475E-Mail: [email protected]
•Verkaufsbüros / Sales offices
Joseph DresselhausBefestigungstechnik GmbH & Co. KGKurt-Fischer-Straße 15 a · D-22926 AhrensburgTel.: +49 4102 4923-0Fax: +49 4102 4923-44 + 45E-Mail: [email protected]
Joseph DresselhausBefestigungstechnik GmbH & Co. KGStraße des 17. Juni 25 · Gebäude 103 BD-01257 DresdenTel.: +49 351 21810-60 Fax: +49 351 21810-65E-Mail: [email protected]
Joseph DresselhausBefestigungstechnik GmbH & Co. KG7, rue Saint Martin · F-57710 AumetzTel.: +33 382827950 Fax: +33 369208100 E-Mail: [email protected]
www.jdplus.de
© w
ww
.rls
.de
07/1
0