products

PRODUCTS COMPARISON SHEET

EXTERIORS

Packshot Product Name Substrate Coverage* (2

Coats)

Gloss/SheenDurability** System Usage

Asian Paints Apex Ultima Advanced Anti Algal Weather Proof Emulsion

Exterior cement plaster, false ceilings, asbestos sheets, concrete, not to be applied on Mangalore tiles

50 - 60 sq ft / ltr

3-12 units at 60 deg gloss head

7 years Asian Paints Exterior Wall Primer @100% dilution. 2 coat Apex Ultima application @35-40% dilution. 4-6 hrs between coats

Asian Paints Apex Weather Proof Exterior Emulsion


50 - 60 sq ft / ltr

Soft Sheen 5 years 2 coat Apex application @ 40% dilution 4 hrs between coats

Apex Duracast RoughTex

Exterior cement masonary plaster

3 - 3.5 sq feet / kg

Matt Finish 8-10 years Apex Duracast Roughtex applied without dilution to get a 2-2.5 mm thick coat. Rub with trowel to get desired texture. Allow to dry overnight. Two top coats with Apex/Apex Ultima of desired shade at 40% dilution

http://www.asianpaints.com/decorative/ps_cmp_emulsion.aspx

http://www.asianpaints.com/decorative/ps_cmp_wood_finishes.aspx

http://www.asianpaints.com/decorative/ps_cmp_enamels.aspx

http://www.asianpaints.com/decorative/ps_cmp_utsav.aspx

http://www.asianpaints.com/decorative/ps_cmp_distemper.aspx

Apex Duracast FineTex

Exterior cement masonary plaster, Interior masonary surfaces

15 sq feet/kg

Matt Finish 5 - 7 years One coat of exterior Primer @ 100% dilution. One coat of Apex Duracast Finetex with honeycomb roller to get desired texture. Allow to dry overnight. Two top coats with Apex/Apex Ultima of desired shade at 40% dilution

Apex Duracast Dholpur Tex

Sand Faced Plasters, Concrete brickwork etc. Can also applied on suitable surfaces in interiors

2.5sq feet / kg Matt Finish 5 - 7 years

Apex Duracast Dholpur tex applied without dilution . Rub with trowel to get desired texture. Allow to dry overnight. Two top coats with Apex/Apex Ultima of desired shade at 40% dilution

Apex Duracast Swirltex

Sand Faced Plasters, Concrete brickwork etc. Can also applied on suitable surfaces in interiors

3.54sq feet / kg Matt Finish 5 - 7 years

Apex Duracast Roughtex applied without dilution to get a 2-2.5 mm thick coat. Rub with trowel to get desired texture. Allow to dry overnight. Two top coats with Apex/Apex Ultima of desired shade at 40% dilution

Asian Paints Apex Stretch Water Repellant Exterior Paint


50 - 60 sq ft / ltr

10-20 units at 60 deg gloss head

7 years Asian Paints Exterior Sealer @ 10% dilution 2 coat Apex stretch application @ 35-40% dilution. 6 hours between coats

Asian Paints Ace Exterior Emulsion/Asian Paints Ace Supreme Exterior Emulsion#


50-60 sq ft / ltr

Matt 3 years (non-coastal markets)

Asian Paints Exterior Sealer @ 10% dilution 2 coat ACE application @ 75% dilution. 4 hours between coats

** Durability of the Paint is measured by its ability to resist fading,flaking, anti-algal performance and overall film integrity.# for Mumbai Location only

©All copyrights vested with Asian Paints Ltd.


INTERIORS

Faux Finishes

Packshot Product Name

Substrate

Coverage in sq

ft/ltr (2 Coats)

Gloss Sheen

Durability System Usage

Royale Play Special Effects Paint

Royale Luxury Emulsion basecoat (chosen shade)

100 sq ft per ltr (1 coat)

Soft Sheen

3 years Asian Paints Decoprime ST/WT + Asian Paints Acrylic Putty + Asian Paints Decorpime ST/WT + Royale 40% dilution (2-3 coats)

Royale Play Dune

PPP, PE as base coat

45-55 sq ft per lit

Soft metallic sheen

3-4 years

Asian Paints Decoprime ST/WT + Asian Paints Acrylic Putty + Asian Paints Decorpime ST/WT+ Premium Emulsion 40% (2-3 Coats)

http://www.asianpaints.com/decorative/ps_cmp_exterior.aspx





Royale Play Safari

PPP, PE tinted as base coat

45-55 sq ft per lit

Soft metallic sheen

3-4 years

Asian Paints Decoprime ST/WT + Asian Paints Acrylic Putty + Asian Paints Decorpime ST/WT+ Premium Emulsion 40% (2-3 Coats)

Royale Play Metallics

Royale Luxury Emulsion basecoat (chosen shade)

100 sq ft per ltr (1 coat)

Soft Sheen

4 years Asian Paints Decoprime ST/WT + Asian Paints Acrylic Putty + Asian Paints Decorpime ST/WT + Royale 40% dilution (2-3 coats)

Royale Play Stucco

PPP surface

18-20 sq ft per kg (3 coats)

Sheen/ Glossy Finish

5 years Asian Paints Decoprime ST/WT + Asian Paints Acrylic Putty + Asian Paints Decorpime ST/WT

Regular Finishes


Substrate

Coverage in sq ft/ltr

(2 Coats)

Gloss Sheen


Royale Glitter

Royale Glitter can be applied on smooth plasters, false ceiling, asbestos sheets, concrete etc. It requires a base coat of Asian Paints Premium Emulsion White.

110-125 Smooth metallic finish

5-6 years Apply Asian Paints Primer @ 8-10% dilution with water or turpentine (depends on primer used). After 6-8 hrs for drying, apply Asian Paints Wall Putty, again apply Asian Paints Primer @ 8-10% dilution after 4-6 hrs of putty application. Apply Premium Emulsion White with 60-70% dilution to get a smooth uniform white surface.Then apply 2 coats of Royale @ 40-45% dilution with water. 3-4 hrs between 2 coats

Royale luxury Emulsion

Royale can be applied on smooth plasters,

150-175 Silky smooth with sheen

5-6 years Apply Asian Paints Primer @ 8-10% dilution with water or turpentine (depends on primer used). After 6-8 hrs for drying, apply Asian Paints Wall Putty, again apply Asian Paints Primer @ 8-10% dilution after 4-6

false ceiling, asbestos sheets, concrete etc.

hrs of putty application. Then apply 2 coats of Royale @ 40-45% dilution with water. 3-4 hrs between 2 coats

Premium Emulsion

PE can be applied on smooth plasters, false ceiling, asbestos sheets, concrete etc.

150-170 Matt Finish with slight sheen

4-5 years Apply Asian Paints Primer @ 8-10% dilution with water or turpentine (depends on primer used). After 6-8 hrs for drying, apply Asian Paints Wall Putty, again apply Asian Paints Primer @ 8-10% dilution after 4-6 hrs of putty application. Then apply 2 coats of PE @ 60-70% dilution with water. 3-4 hrs between 2 coats

Tractor Emulsion

TE can be applied on smooth plasters, false ceiling, asbestos sheets, concrete etc.

140-150 Matt Finish with slight sheen

4-5 years Apply Asian Paints Primer @ 8-10% dilution with water or turpentine (depends on primer used). After 6-8 hrs for drying, apply Asian Paints Wall Putty, again apply Asian Paints Primer @ 8-10% dilution after 4-6 hrs of putty application. Then apply 2 coats of TE @ 50-75% dilution with water. 4 hrs between 2 coats

Interior Wall Finish - Matt

Asian Paints Matt can be applied on suitably prepared masonry walls

100-130 Matt 3 years Apply Asian Paints Primer @ 8-10% dilution with water or turpentine (depends on primer used). After 6-8 hrs for drying, apply Asian Paints Wall Putty, again apply Asian Paints Primer @ 8-10% dilution after 4-6 hrs of putty application. Then apply 2 coats of Asian Paints Matt Finish @ 7-9% dilution with Mineral Turpentine. 8 hrs between 2 coats

Interior Wall Finish - Lustre

Asian Paints Lustre can be applied on suitably prepared

110-150 Silky smooth finish

4-5 years Apply Asian Paints Primer @ 8-10% dilution with water or turpentine (depends on primer used). After 6-8 hrs for drying, apply Asian Paints Wall Putty, again apply Asian Paints Primer @ 8-10% dilution after 4-6 hrs of putty application. Then apply 2 coats of Asian Paints Lustre Finish @

masonry walls

7-9% dilution with Mineral Turpentine. 8 hrs between 2 coats



WOOD FINISHES

Clear Finishes

Packshot

Product Name

Substrate

Coverage

(single coat)

Gloss Sheen

Gloss* (Applica

ble to Glossy Variant

s)

Scratch Resista

nce

Stain Resista

nce

Hardness

Impact Resista

nce

Non- Yellow

ing proper

ty

System Usage

Melamyne

All types of interior Wood, veneers, Plywood MDF etc

100-120 sq. ft

Availaible in glossy and Matt. Glossy and Matt can be mixed in any proportion to get desired level of sheen

Very Good

Very Good

Very Good

Very Good

Very Good

Average

Two-pack system. Base and hardener to be mixed in the the ratio of 9:1. Application by spraying. Dilution by Asian Paints Thinner 124 , 20-40%






by volume. Two coats of Melamyne Sealer to be applied with recoating time of 5-6 hours between coats. This is to be followed with two coats of top-coats. Recoating time 5-6 hours between coats. In case of application by brushing or ragging. Melamyne Brushing thinner to be used in place of thinner 124.

Recoating time in this case would increase to 8-10 hours

Melamyne Gold Clear


100-120sq ft.


Very Good

Very Good

Very Good

Very Good

Very Good

Very Good

Two-pack system. Base and hardener to be mixed in the the ratio of 9:1 Application by spraying. Dilution by Asian Paints Thinner 124 , 20-40% by volume. Two coats of Melamyne Sealer to be applied with recoating time of 5-6 hours between coats.

This is to be followed with two coats of top-coats. Recoating time 5-6 hours between coats

Pu Interior


100-120sq ft.


Excellent

Excellent

Excellent

Excellent

Excellent

Excellent

Two-pack system. Base and hardener to be mixed in the the ratio of 8:2 Application by spraying. Dilution by Asian Paints PU Thinner 15-30% by volume. Two coats of PU Interior Sealer to be applied with

recoating time of 8-10 hours between coats. This is to be followed with two coats of top-coats. Recoating time 8-10 hours between coats

Packshot

Product

Name

Substrate

Coverage

(single coat)

Gloss Sheen

Gloss* (Applica

ble to Glossy

Variants)

Scratch Resista

nce

Exterior

Durability

Hardness

Impact Resista

nce

Non- Yellowi

ng proper

ty

System Usage

Pu Exterior

Designed for exterior wood, can be used on all types of interior and Wood, veneers, Plywood and MDF. Solid wood is

100-120sq ft.


Excellent

Excellent

Excellent. UV-Guards block harmful rays of the sun anprovide good hardness

Excellent

Excellent

Excellent

Two-pack system. Base and hardener to be mixed in the the ratio of 8:2 Application by spraying. Dilution by Asian Paints PU Thinner

preferred substrate for exteriors

15-30% by volume. Two coats of PU Exterior Sealer to be applied with recoating time of 10-12 hours between coats. This is to be followed with two coats of top-coats. Recoating time 10-12 hours between coats

Opaque Finishes

Packshot

Product

Name

Substrate

Coverage

(single coat)

Gloss Sheen

Gloss* (Applicable to Glossy Variant

s)

Scratch

Resistance

Stain Resista

nce

Hardness

Impact Resista

nce

Non- Yellow

ing proper

ty

System Usage

Pu Palette

All types of interior Wood, veneer

100-120sq ft.

Availaible in glossy and Satin.

Excellent

Excellent

Excellent

Excellent

Excellent

Excellent

Two-pack system. Undercoat to be used is PU palette Primer Surfacer.

s, Plywood MDF etc

Base and hardener to be mixed in the the ratio of 9:1 Application by spraying. Dilution by Asian Paints PU Thinner 15-30% by volume. Two coats of PU Platte Primer Surfacer to be applied with recoating time of 3 hours hours between coats. This is to be followed with two coats of top-coats. Base and hardener mixing ratio for top-coats is 8:2. Two coats of desired shade to be applied.Recoating time 8-10 hours between coats

Melamyne Palette

All types of interior

100-120 sq. ft

Availaible in glossy and Satin.

Very Good

Very Good

Very Good

Very Good

Very Good

Good Two-pack system. Undercoat to be used is Melamyne

Wood, veneers, Plywood MDF etc

palette Primer Surfacer. Base and hardener to be mixed in the the ratio of 9:1 Application by spraying. Dilution by Asian Paints Thinner 124 20-40% by volume. Two coats of Melamyne Platte Primer Surfacer to be applied with recoating time of 2 hours hours between coats. This is to be followed with two coats of top-coat. Base and hardener mixing ratio for top-coats is 9:1. Two coats of desired shade to be applied.Recoating time 6-8 hours between

coats



ENAMELS

PackshotProduct Name

Substrate Coverage in sq

ft/ltr (2 Coats)

Gloss Sheen

Durability in yrs

System Usage

Premium Semi Gloss Enamel

Premium Semi Gloss Enamel can be applied on wood, metal surfaces and walls

90-110 Semi Gloss

3 years Apply Asian Paints Primer @ 8-10% dilution with turpentine. Premium Semi Gloss Enamel can also be used as primer @100% dilution with water. After 6-8 hrs of drying, apply Asian Paints Wall Putty (for masonry or cement surfaces) or Asian Paints Knifing Paste Filler (for wood or metal surfaces). Again apply Asian Paints Primer @ 8-10% dilution with turpentine or Premium Semi Gloss Enamel @ 100% dilution with water after 4-6 hrs of putty application (6-8 hrs in case Knifing Paste Filler is used). Then apply 2 coats of Premium Semi Gloss Enamel @ 15-25% dilution with water. 4-6 hrs between 2 coats

Premium Satin Enamel

Premium Satin Enamel can be applied on wood, metal surfaces and walls

100-120 Low Gloss

3 years Apply Asian Paints Primer @ 8-10% dilution with turpentine. After 6-8 hrs of drying, apply Asian Paints Wall Putty (for masonry or cement surfaces) or Asian Paints Knifing Paste Filler (for wood or metal surfaces). Again apply Asian Paints Primer @ 8-10% dilution






after 4-6 hrs of putty application (6-8 hrs in case Knifing Paste Filler is used). Then apply 2 coats of Premium Satin Enamel @ 15-20% dilution with turpentine. 6-8 hrs between 2 coats

Premium Gloss Enamel

Premium Gloss Enamel can be applied on wood, metal surfaces and walls

100 Glossy 3

Apply Asian Paints Primer @ 8-10% dilution with turpentine. After 6-8 hrs of drying, apply Asian Paints Wall Putty (for masonry or cement surfaces) or Asian Paints Knifing Paste Filler (for wood or metal surfaces). Again apply Asian Paints Primer @ 8-10% dilution with turpentine o. Then apply 2 coats of Premium Gloss Enamel @10% dilution with turpentine. Leave 6-8 hours gap between the two coats.

Utsav Enamel

Utsav Enamel is recommended for usage on interior surfaces. It can be applied on wooden surfaces (like doors, windows, furniture, cabinets) and also on metal surfaces like grills, furniture, and on suitably prepared masonry wall surfaces

75-95 Glossy

2 years Sand the surface with Emery paper 180 and wipe clean. Apply asian paints primer @ 8-10 dilution with turpentine. After 6-8 hrs drying apply asian paints wall putty after 6-8 hrs drying sand the saruface with Emery paper 180 and Wipe clean. Again apply asian paints primer. Then apply 2 coat of Utsav Enamel @8-10% dilution with terpentine. Recoating period is 6-8 hrs.



ECONOMY RANGE PRODUCTS: UTSAV RANGE


Substrate Coverage in sq

mtr/ltr (2 Coats)

Gloss Sheen


Utsav Acrylic Distemper

Utsav Acrylilc Distemper can be applied on various types of plasters, false ceiling, asbestos sheets, concrete etc. Designed for interiors

2 coats 7-8

Matt Finish

3 years Sand the surface with Emery paper 100 and wipe clean. Apply Asian Paints Primer @ 8-10% dilution with water or turpentine (depends on primer used). After 6-8 hrs for drying, apply Asian Paints Wall Putty after 6-8 hrs drying sand the surface with Emery paper 180 and wipe clean. again apply Asian Paints Primer. Then apply 2 coats of UAD @ 65-75% dilution with water. Recoating period is 3-4 hrs

Utsav Enamel

Utsav Enamel is recommended for usage on interior surfaces. It can be applied on wooden surfaces (like doors, windows, furniture, cabinets) and also on metal surfaces like grills, furniture, and on suitably prepared

2 coats 7-9

Glossy

2 years Sand the surface with Emery paper 180 and wipe clean. Apply asian paints primer @ 8-10 dilution with turpentine. After 6-8 hrs drying apply asian paints wall putty after 6-8 hrs drying sand the saruface with Emery paper 180 and Wipe clean. Again apply asi






masonry wall surfaces

Utsav Distemper

Utsav Distemper should be used only on interior surfaces. It can be applied on suitably prepared masonry wall surfaces

2 coats 6-7

Matt Finish

2 years Sand the Surface with Emery paper 100 and wipe clean than apply 2 coats of Utsav Distemper @ 75% dilution with water. Recoating period is 4-6 hrs

Utsav Floor Colour

Asian paints Utsav Flooring colour can be used to impart colour to cement surfaces

N/A N/A 10 years Add 1 kg of Utsav Floor Colour to 6-8 kg of cement. Add suitable quantity of water to make a homogeneous free flowing paste. Clean and moisten the surface to be coated. Sprinkle dry cement on the moist surface. Allow it to set in for at least 1 hr. Apply the paste as a

Utsav Metal Primer Red Oxide

Utsav Metal primer - Red oxide is suitable for priming ferrous metal substrates

1 coat 14-16

Matt 5-6 years Apply Asian Paints Utsav Metal Primer Red Oxide @ 4-5% dilution with turpentine. After 6-8 hrs for drying, apply AKPF (optional) allow it to dry for 4-6 hrs. Sand lightly with Emery paper 180 and wipe clean. Apply 2nd of Utsav Metal Primer Red Oxide on ar

Utsav Primer (WT)

Asian paints Utsav Primer WT is suitable for priming plastered walls, asbestors, cement and concrete etc.

1 coat 20-25

Matt 4-5 years Sand the surface with Emery paper 180 and wipe clean. Apply asian paints Utsav primer WT @ 100% dilution with water. After 4-6 hrs drying apply asian paints wall putty after 6-8 hrs drying sand lightly with Emery paper 180 and Wipe clean. Again apply asia

Utsav Primer (ST)

Asian paints utsva primer ST should be used only on

1 coat 18-20

Sheen 4-5 years Sand the surface with Emery paper 180 and wipe clean. Apply asian paints Utsav primer ST @ 8-10 dilution with turpentine. After

interior surfaces. It can be applied on suitably prepared masonry and wall surfaces, as well as wooden surfaces like doors, window, furniture, cabinets etc.

6-8 hrs drying apply asian paints wall putty after 6-8 hrs drying sand the sarface with Emery paper 180 and Wipe clean. Again apply asian paints Utsav primer ST.



DISTEMPERS


Substrate Coverage in sq ft/ltr (2 Coats)

Gloss Sheen


Tractor Acrylic Distemper

TAD can be applied on smooth plasters, false ceiling, asbestos sheets, concrete etc.

85-90

Matt Finish. No sheen

3 Yrs

Sand the surface with Emery paper 100 and wipe clean. Apply Asian Paints Primer @ 8-10% dilution with water or turpentine (depends on primer used). After 6-8 hrs for drying, apply Asian Paints Wall Putty after 6-8 hrs drying sand the surface with Emery paper and Apply Asian Paints Primer @ 8-10% 3-4 Hrs between 2 Coats






Tractor Synthetic Distemper

Tractor Synthetic Distemper can be applied on various types of plasters, false ceiling, asbestos sheets, concrete etc. Designed for interiors

85-118 Matt Finish. No sheen

3-4 years Sand the surface with Emery paper 180 and wipe clean. Apply Asian Paints Primer @ 8-10% dilution with water or turpentine (depends on primer used). After 6-8 hrs for drying, apply Asian Paints Wall Putty. after 4-6 hrs drying sand the surface with Emery paper 180 and wipe clean. again apply Asian Paints Primer. Then apply 2 coats of TSD @ 50-60% dilution with water. Recoating period is 6 hrs

Utsav Acrylilc Distemper

Utsav Acrylilc Distemper can be applied on various types of plasters, false ceiling, asbestos sheets, concrete etc. Designed for interiors


3 years Sand the surface with Emery paper 100 and wipe clean. Apply Asian Paints Primer @ 8-10% dilution with water or turpentine (depends on primer used). After 6-8 hrs for drying, apply Asian Paints Wall Putty. after 6-8 hrs drying sand the surface with Emery paper 180 and wipe clean. again apply Asian Paints Primer. Then apply 2 coats of UAD @ 65-75% dilution with water. Recoating period is 3-4 hrs

Utsav Distemper

Utsav Distemper should be used only on interior surfaces. It can be applied on


2 years Sand the Surface with Emery paper 100 and wipe clean than apply 2 coats of Utsav Distemper @ 75% dilution with water. Recoating period is 4-6 hrs

suitably prepared masonry wall surfaces


products

Documents

products comparison

utsav floor

sq sheen ftltr

hardener mixing

veneers glossy

paints wall

plywoo matt

recoating